Silvercrest 298849, DZKW 20-A FR 3655 Operation and Safety Notes

  • Prečítal som si návod na použitie pre digitálne týždenné spínacie hodiny SilverCrest DZKW 20-A FR 3655. Som pripravený odpovedať na vaše otázky o jeho funkciách, nastavení programov, funkcii náhodného spínania a riešení problémov. Návod obsahuje podrobné pokyny pre nastavenie času, programov a prevádzkových režimov.
  • Ako nastavím aktuálny čas na spínacích hodinách?
    Ako aktivujem funkciu náhodného spínania?
    Čo sa stane, ak sa časové intervaly rôznych programov prekrývajú?
    Ako dlho trvá nabíjanie batérie?
TIMER SWITCH
ZEITSCHALTUHR
Bedienungs- und Sicherheitshinweise
TIMER SWITCH
Operation and Safety Notes
ČASOVÉ SPÍNACÍ HODINY
Pokyny pro obsluhu a bezpečnostní pokyny
SPÍNACIE HODINY
Pokyny pre obsluhu a bezpečnostné pokyny
IAN 298849
GB Operation and Safety Notes Page 5
CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 33
SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 62
DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 91
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi
funkcemi přístroje.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so
všetkými funkciami prístroja.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
B
21
16
1423
22
15
17
20 1818 19
CLOCK TIMER ON/AUTO/OFFWEEK HOUR
RST/RCL
MIN
RANDOM
MASTER CLEAR
A
12
7
3
4
5
11
10
9 8
6
1
13
2
5 GB
List of pictograms used ..........Page 7
Introduction ..................................... Page 8
Intended use ..........................................Page 8
Control elements ....................................Page 9
Technical data .......................................Page 10
Safety notices ................................Page 11
Control- and display
elements .............................................Page 13
Control elements ....................................Page 13
Displays + Explanation .........................Page 13
Operating mode function ......................Page 15
Program function....................................Page 15
Clock function ........................................ Page 16
Preparation .....................................Page 16
Charging the device .............................. Page 16
Reset all settings .....................................Page 17
Setting the current time ..........................Page 18
Setting standard and summer time ....... Page 18
Setting the hour mode ........................... Page 19
6 GB
Operation ..........................................Page 21
No notifications on the display .............Page 21
Switching to the clock function .............Page 21
(De-)activating continuous operation ...Page 22
Configuring programs ........................... Page 24
Switching the random function
on and off ..............................................Page 27
Cleaning .............................................. Page 29
Disposal ...............................................Page 30
Warranty and Service ............Page 30
Service address .....................................Page 31
Manufacturer ......................................... Page 32
7 GB
List of pictograms used
Observe the warning and
safety instructions!
Attention! Risk of electric shock!
Do not dispose of electric equip-
ment in the household waste!
Use indoors
-10T40
Ambient temperature
Micro-switch with a contact
opening width of < 3 mm
8 GB
Timer Switch
Digital – for indoors
Introduction
Intended use
The device is intended as a digital weekly
timer switch for use in enclosed, dry rooms
and designed for private use. It is not suita-
ble for commercial use. Only operate the
device individually. Do not connect several
timer switches in series. Any other use is con-
sidered improper. The manufacturer is not
liable for damages due to improper use.
Read the entire instructions for use before
using the device. Keep these instructions for
use. Include the instructions for use when
passing the device on.
9 GB
Control elements (Fig. A)
1
LC display
2
LED status light
3
RST / RCL button
4
MIN button
5
HOUR button
6
Socket
7
WEEK button
8
ON / AUTO / OFF button
9
TIMER button
10
CLOCK button
11
RANDOM button
12
MASTERCLEAR button
13
Plug (reverse)
LC display (Fig. B)
14
Weekday display
15
R symbol
16
S symbol
17
Seconds display
10 GB
18
ON – AUTO – OFF
19
Minutes display
20
Hours display
21
Program number
22
AM – PM
23
ON – OFF
Technical data
Model designation: DZKW 20-A FR
3655
Operating voltage: 230 V
~
50 Hz
Switched voltage: 230 V
~
16(2) A
Switching capacity: max. 3600 W
Ambient temperature: -10 °C to 40 °C
-10T40
Time error: ± 1 minute / month
Shorting switching time: 1 minute
Programs: 10 ON / OFF
program sets
11 GB
Battery: NiMH 1.2 V
> 100 h
Use
indoors:
CE compliant:
Safety notices
Children are not able to understand the
dangers arising from improper use of
electric devices. Never leave children
unsupervised when using electric devices.
Only plug the device into safely installed
sockets.
Only connect loads within the specified
capacities of the device.
Do not cover the device. Heat accumu-
lates when covered, creating a fire
hazard.
12 GB
Regularly check the device for damage.
Do not replace damaged parts but con-
tact the manufacturer or dispose of the de-
vice in an environmentally responsible wa
y.
Do not open the device. Opening the
device will void the warranty.
The device contains a rechargeable bat-
tery. A defective rechargeable battery
must be replaced by the manufacturer.
Do not touch the device with wet hands
or bring into contact with water.
Disconnect the device from the power
mains to de-energise.
Do not connect heaters or similar loads
to the device, as these must never be
operated unattended.
13 GB
Control- and
display elements
Control elements
MASTERCLEAR button
12
This button will delete all time and program
settings.
Displays + Explanation
Weekdays
14
The abbreviations on the LC display
1
mean:
MO Monday
TU Tuesday
WE Wednesday
TH Thursday
FR Friday
SA Saturday
SU Sunday
14 GB
R Symbol
15
The R symbol indicates random switching is
activated. The R symbol means random. In
this mode the device will switch the con-
nected loads on and off at different intervals.
S symbol
16
Indicates the clock has been set to summer
time.
ON – AUTO – OFF
18
Indicates the operating mode of the device.
Program number
21
Indicates the program number in PROGRAM
function.
AM – PM
22
Indicates the hour mode.
15 GB
ON – OFF
23
Indicates the switching state:
ON = turn-on time, OFF = turn-off time.
The switching state is only visible under
program function.
Operating mode function
The different operating modes are:
AUTO = automatic program operation,
ON = continuous operation ON,
OFF = continuous operation OFF.
Program function
This function allows the on- and off times to
be programmed for the connected load.
16 GB
Clock function
This function shows the current time in the LCD.
Preparation
To start up the device you must:
1. Charge the device.
2. Reset all settings.
3. Set the current time.
Charging the device
Insert the plug
13
into a mains socket.
Charge the rechargeable battery for
14 hours.
17 GB
Reset all settings
Note: The device does not need to be con-
nected to the mains to configure the settings.
Reset all settings
Press the MASTERCLEAR
12
button with
a pen or other pointy object. The LC dis-
play
1
will read:
All settings cleared.
18 GB
Setting the current time
Note: Hold the HOUR, MIN button for
faster programming.
Press and hold the CLOCK
10
button.
Set the current day of the week with the
WEEK
7
button.
Set the hour with the HOUR
5
button.
Set the minute with the MIN
4
button.
Release the CLOCK button
10
.
Setting standard
and summer time
Setting summer time
Simultaneously press the CLOCK
10
and
ON / AUTO / OFF
8
buttons. The LCD
1
will advance the hour display
20
by
one hour and the S symbol
16
disappears.
19 GB
Setting standard time
Simultaneously press the CLOCK
10
and
ON / AUTO / OFF
8
buttons. The S
symbol
16
disappears from the LCD
1
and the hour
20
decreases by one.
Setting the hour mode
The LCD
1
can display the current time in
12- or 24-hour mode. In 12-hour mode AM
means before 12 noon, PM after 12 noon.
The default is 24 hour mode.
20 GB
Setting to 12 hour mode
Simultaneously press the TIMER
9
and
CLOCK
10
buttons. The LCD will show
AM or PM
22
.
The following illustration shows 23:00
hours in 12-hour mode.
Setting to 24-hour mode
Simultaneously press the TIMER
9
and
CLOCK
10
buttons. The LCD will stop
showing AM or PM
22
.
/