Panasonic SCUA90E Návod na používanie

Značka: Panasonic

Model: SCUA90E

Typ: Návod na používanie

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Wireless Speaker System

Zestaw głośników bezprzewodowych

Bezdrátová souprava reproduktorů

Model No. SC-UA90

TQBJ2094

Děkujeme za zakoupení tohoto výrobku.

Pro dosažení optimálního výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Uschovejte si prosím tento návod k obsluze.

Dziękujemy za zakupienie tego produktu.

Proszę dokładnie zapoznać się z tą instrukcją obsługi, aby jak najlepiej wykorzystać to urządzenie i zapewnić jego

bezpieczne użytkowanie.

Prosimy o zachowanie niniejszej instrukcji obsługi.

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

SC-UA90 E TQBJ2094 En.fm Page 1 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Your system and the illustrations can look differently.

Back of product

The symbols on this product (including the accessories)

represent the following:

Table of contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Sales and Support Information . . . . . . . . . . . . . . . . . . . . 3

Caution for AC mains lead . . . . . . . . . . . . . . . . . . . . . . . 3

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Transporting the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the remote control . . . . . . . . . . . . . . . . . . . . . 5

Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . 5

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preparing media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Media playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

DJ functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using a microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Karaoke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

External equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as lighted

candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

• Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and

excessive vibration.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Class II equipment (The construction of the

product is double-insulated.)

Standby

Recording and playback of content on this (or any other)

device may require permission from the copyright

owner. Panasonic has no authority to and does not grant

you that permission and explicitly disclaims any right,

ability or intention to obtain such permission on your

behalf. It is your responsibility to ensure that your use of

this or any other device complies with applicable

SC-UA90 E TQBJ2094 En.fm Page 2 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

Sales and Support Information

For the United Kingdom and Ireland

Customer Communications Centre

• For customers within the UK: 0344 844 3899

• For customers within Ireland: 01 289 8333

• Monday – Friday 9:00am – 5:00pm

(Excluding public holidays).

• For further support on your product, please visit our

website: www.panasonic.co.uk

Direct Sales at Panasonic UK

• Order accessory and consumable items for your product

with ease and confidence by phoning our Customer

Communications Centre

Monday – Friday 9:00am – 5:00pm

(Excluding public holidays).

• Or go on line through our Internet Accessory ordering

application at www.pas-europe.com

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are

provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for

a wide range of finished products. Take a browse on our

website for further details.

Caution for AC mains lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that

the replacement fuse has a rating of 5-ampere and that it

is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the

body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your

local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse cover

Fuse (5 ampere)

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 3 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Supplied accessories

Check and identify the supplied accessories. Product

numbers correct as of July 2018. These may be subject to

change.

 2 AC mains leads

For the United Kingdom and Ireland

(K2CT2YY00089)

 1 FM indoor antenna

(RSAX0002)

 1 Remote control

(N2QAYB001198)

 1 Remote control battery

 For the United Kingdom and Ireland

1 Antenna plug adaptor

(K1YZ02000013)

Note:

Use the AC mains lead that is suitable for your household

mains socket.

Transporting the unit

Preparation

Disconnect all connected devices and cables from the

unit.

Note:

• More than one person is required to move, tilt or carry the

unit.

• Keep the unit at least 10 mm away from other objects for

proper ventilation.

• Put the unit on a flat safe surface.

• The speakers do not have magnetic shielding. Do not put

them near PCs or other equipment easily influenced by

magnetism.

• The audio output is

multidirectional. Do not

obstruct the speakers with any

object that may decrease the

sound quality.

• The subwoofer is located at the

front and rear of the unit. Keep

the rear of the unit at least

10 cm away from the wall for

better sound quality.

• When you play at high levels

for a long period, it can cause

damage to the speakers and

decrease the life of the speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

Maintenance

Disconnect the AC mains lead before maintenance.

Clean this system with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Lighting plate

CAUTION!

• Improper handling or transportation manner may

cause the unit to fall, etc., resulting in damage

and/or personal injury.

• Do not transport the unit by holding the lighting

plate as this may damage the lighting plate.

• Do not put any object on the top panel of the unit.

• Do not allow children to climb on the unit.

• Be careful when babies or children are near.

SC-UA90 E TQBJ2094 En.fm Page 4 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1 Connect the FM indoor antenna.

Put the antenna where reception is best.

2 Connect the AC mains lead.

Do not use any other AC mains leads except the

supplied one.

Hold the unit when connecting or disconnecting the

AC mains lead to prevent the unit from falling.

Conserving power

The system consumes a small amount of power even

when it is in standby mode. Disconnect the power

supply if you do not use the system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Note:

Keep the antennas away from the AC mains lead to avoid

picking up noise.

Adhesive tape

(not supplied)

For the United Kingdom and Ireland

Connect the FM outdoor antenna.

Use an outdoor antenna if reception is poor.

CAUTION!

Keep the antenna plug adaptor out of reach of

children to prevent swallowing.

Note:

• Do not use the outdoor antenna during a lightning

storm.

• Disconnect the outdoor antenna if you do not use the

system.

(For the AC mains plug of three pins)

READ THE “Caution for AC mains lead” BEFORE

CONNECTION.

Antenna plug adaptor

75  coaxial cable

(not supplied)

FM outdoor antenna

(not supplied)

To household mains socket

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 5 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Overview of controls

Do the procedures with the remote control. You can also use the touch keys on the unit if they are the same.

A Standby/on switch [`], [1]

Press*

or touch*

to switch the unit from on to standby

mode or vice versa. In standby mode, the unit is still

consuming a small amount of power.

For the button on the remote control

For the touch key on the unit

B Numeric buttons

To select a 2-digit number

Example: 16: [ 10]=[1]=[6]

C Decrease the brightness of the display panel and

the illumination

The status indicators are also switched off.

To cancel, press the button again.

D Select the audio source

Press [SELECT <, >] (unit: [SELECT]) repeatedly to

select the source:

On the unit:

To start Bluetooth

pairing, touch and hold [ ].

E Basic playback control

F Select DJ effect or DJ sampler

G View the content information

H Select the Karaoke effects

I Select MP3 album or track

J View the setup menu

K Recording operation control

L Operate a Panasonic TV (compatible models only)

Point the remote control to a Panasonic TV:

[`/TV]: Switch on or switch off the TV

[AV/INPUT]: Change the video input mode of the TV

[VOL +/–]: Adjust the volume level of the TV

M Adjust the volume level

N Mute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

O Select the sound effects

P Adjust the microphone volume level

Q Select DJ jukebox or Karaoke jukebox

R Switch on or switch off the illumination

S Select or confirm the option

T View the play menu

U Set the sleep timer

USB A USB B

MEMORY AUXBLUETOOTH

D-INFMCD

SC-UA90 E TQBJ2094 En.fm Page 6 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

V USB status indicator

W Display panel

X DJ jukebox or Karaoke jukebox status indicator

Y Internal memory status indicator

Z Open or close the disc tray

a Microphone jack

b USB A

USB port ( )

Play MP3 tracks.

c USB B

USB port ( )

Play MP3 tracks.

Record sound or music tracks.

d Disc tray

e Remote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left and

right

Note:

You can use the touch keys just by touching the marks. The

system beeps when you touch any touch key. Refer to “Touch

sound” (~18) on how to switch off the touch sound.

• To ensure these touch keys are operated correctly, make

sure to touch within the touching area of the mark (refer to

the illustration above for the touch area).

• To avoid operating these touch keys unintentionally, do not

put any object on them.

Top panel

: Touch area

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 7 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Preparing media

Disc

1 Touch [x] on the unit to open the disc tray.

Put in a disc with the label facing up.

Touch again to close the disc tray.

2 Press [SELECT <, >] repeatedly to select “CD”.

USB

Preparation

Before you connect a USB device to the system, make

sure you do a backup of the data.

1 Decrease the volume and connect the USB device

to the USB port.

2 Press [SELECT <, >] repeatedly to select “USB A”

or “USB B”.

USB status indicator lights up in red when selected.

Note:

• Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

• Some devices cannot be charged as the maximum USB

charging current is 0.5 A only.

Bluetooth

You can connect and play an audio device wirelessly

through Bluetooth

Preparation

• Switch on the unit.

• Switch on the Bluetooth

feature of the device and put

the device near the system.

• Read the operating instructions of the device for details.

█

Pairing a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~8).

1 Press [ ].

If “PAIRING” is shown, continue with step 3.

2 Press [PLAY MENU] to select “PAIRING” and then

press [OK].

3 Select “SC-UA90” from the Bluetooth

menu of the

device.

If prompted for a passkey, input “0000” or “1234”.

The device connects with this system automatically

after pairing is complete.

The MAC address (example: 6C:5A:B5:B3:1D:0F)

may be shown before “SC-UA90” is shown.

The name of the connected device is shown for a few

seconds.

Using the unit

1 Touch and hold [ ] until “PAIRING” is shown.

2 Select “SC-UA90” from the Bluetooth

menu of the

device.

Note:

• You can pair up to 8 devices with this system. If a 9th device

is paired, the device that has not been used for the longest

time will be replaced.

• Depending on the searching functionality of the Bluetooth

device and the surrounding environment, if the product

name is not shown on the Bluetooth

menu of the device,

switch off and then switch on the Bluetooth

feature of the

device repeatedly during the pairing process.

█

Connecting a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~8).

1 Press [ ].

“BLUETOOTH READY” is shown.

2 Select “SC-UA90” from the Bluetooth

menu of the

device.

The name of the connected device is shown for a few

seconds.

3 Start playback on the device.

Note:

• A device must be paired to connect.

• This system can only connect to one device at a time.

• When “BLUETOOTH” is selected as the source, this system

will automatically try to connect to the last connected device.

(“LINKING” is shown during this process.)

█

Disconnecting a device

While a Bluetooth

device is connected

1 Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

2 Press [Y, U] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the unit

Touch and hold [ ] until “PAIRING” is shown.

Note:

A device is disconnected when you:

• Select a different source.

• Move the device out of the maximum range.

• Disable the Bluetooth

transmission of the device.

• Switch off the system or the device.

SC-UA90 E TQBJ2094 En.fm Page 8 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Media playback

The following marks indicate the availability of the feature.

Basic playback

CD USB BLUETOOTH MEMORY

Note:

Depending on the Bluetooth

device, some operations may not

work.

Viewing available information

CD USB BLUETOOTH MEMORY

You can view the available information, such as MP3

album and track number, on the display panel.

Press [DISPLAY] repeatedly.

Example: MP3 album and track number display.

Note:

• Maximum characters that can be shown: Approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show

differently.

Play menu

CD USB MEMORY

1 Press [PLAY MENU].

2 Press [Y, U] to select the setting and then press

[OK].

Note:

• During random playback, you cannot skip to tracks which

have been played.

• The setting is cancelled when you open the disc tray or

disconnect the USB device.

CD :

USB :

BLUETOOTH :

MEMORY :

CD-R/RW in CD-DA format or with MP3 files.

USB device with MP3 files.

Bluetooth

device.

Internal memory (refer to “Recording” on

page 11 for adding tracks to the internal

memory).

Play Press [4/9].

Stop Press [8].

USB MEMORY

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5/6] to skip track.

CD USB MEMORY

Press [R, T] to skip MP3 album.

Search Press and hold [2/3] or [5/6].

Album

number

Track

number

OFF PLAYMODE Cancel the setting.

1-TRACK

Play one selected track.

Press the numeric buttons to select

the track.

1-ALBUM

Play one selected MP3 album.

Press [R, T] to select the MP3

album.

RANDOM

RND

Play all tracks randomly.

1-ALBUM

RANDOM

1 RND

Play all tracks in one selected MP3

album randomly.

Press [R, T] to select the MP3

album.

ALL REPEAT Repeat all tracks.

1-TRACK REPEAT

Repeat 1-TRACK.

1-ALBUM REPEAT

Repeat 1-ALBUM.

RANDOM REPEAT

RND

Repeat random playback.

1-ALBUM

RANDOM REPEAT

1 RND

Repeat 1-ALBUM RANDOM.

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 9 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Link mode

BLUETOOTH

You can change the link mode to suit the connection type.

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~8).

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [Y, U] to select the mode and then press

[OK].

Note:

• When enjoying video contents with this function, the video

and audio output may not be synchronised. In this case,

select “MODE 1”.

• Select “MODE 1” if the sound is interrupted.

█

Note on disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Before playback, finalise the disc on the device it was

recorded on.

• Some CD-R/RW cannot be played because of the

condition of the recording.

█

Note on USB device

• This system does not guarantee connection with all

USB devices.

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█

Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension “.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

– 999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Radio

Preparation

Press [SELECT <, >] repeatedly to select “FM”.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or touch [8] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [Y, U] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

“STEREO” is shown when a stereo broadcast is being

received.

Memory presetting

You can preset up to 30 FM stations.

█

Automatic presetting

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [Y, U] to select “LOWEST” or “CURRENT”

and then press [OK].

The tuner presets all the stations it can receive into the

channels in ascending order.

To cancel, press [8].

█

Manual presetting

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or touch [8] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [Y, U] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press the numeric buttons to select a preset

number.

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

MODE 1 Emphasis on connectivity.

MODE 2 (default) Emphasis on sound quality.

LOWEST Tuning begins from the lowest

frequency.

CURRENT Tuning begins from the current

frequency.

SC-UA90 E TQBJ2094 En.fm Page 10 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

█

Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or touch [8] on the unit to select “PRESET”. Continue

with step 3.

2 Press [Y, U] to select “PRESET” and then press

[OK].

3 Press the numeric buttons, [2/3] or

[5/6] to select the preset station.

Improving the sound quality

1 Press [PLAY MENU] repeatedly to select

“FM MODE”.

2 Press [Y, U] to select “MONO” and then press

[OK].

To cancel, select “STEREO”.

“MONO” is also cancelled when you change the

frequency.

To memorise the setting

Continue with step 4 of “Manual presetting” (~10).

Checking the signal status

Press [DISPLAY] to select “FM STATUS”.

RDS broadcasting

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.

Press [DISPLAY] repeatedly.

Note:

RDS may not be available if reception is poor.

Recording

This system can record up to 800 folders (maximum 999

tracks in an album) or a total of 8000 tracks, depending on

the available storage capacity of the internal memory or

the USB device in

USB B .

To check storage space

In the stop mode, press [DISPLAY] repeatedly.

Example: Remaining recording time of the internal

memory.

• “UPDATE” is shown when the system is reading the

USB device.

• “NO DEVICE” is shown if there is no USB device

connected to

USB B .

To select where recordings are kept

1 Press [SETUP] repeatedly to select “REC TO?”.

2 Press [Y, U] to select “MEMORY” or “USB B” and

then press [OK].

Note:

• All recordings are in “.mp3” format.

• You cannot do recording when you are using random

playback mode or in the optical input source.

• The DJ function or Karaoke function is switched off when

you start recording.

• Repeat playback mode is cancelled during recording.

• A new album is added each time you do a recording.

• The sequence of album may change after the recording.

• The recordings are kept in a folder named “REC_DATA” in

the USB device or the internal memory.

• USB status indicator blinks in red during USB recording.

• Internal memory status indicator blinks in red during internal

memory recording.

Basic recording

1 Select the source you want to record.

CD-DA

Prepare the disc playback mode.

Make sure the disc is stopped.

Radio

Tune in to the radio station.

AUX

Connect and play the equipment (~17).

FM–––– The FM signal is weak.

The system is not tuned in to a station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the “FM MODE”.

The FM signal is in monaural.

PS Programme service

PTY Programme type

FREQ Frequency

Record all

tracks

Select “OFF PLAYMODE” (~9).

Record a

specified track

Select “1-TRACK” (~9).

Internal memory

source

Remaining recording time

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 11 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

2 Press [REC 7/9] to start recording.

The name of the folder that keeps the recording is

shown.

Note:

• Wait for a few seconds for the system to prepare the USB

device before you start recording.

• When the next track of the disc is being recorded, it will be

shown on the display.

█

High-speed recording

CD-DA disc recording speed:

CD, CD-R: Three times (3x) the normal speed.

CD-RW: Two times (2x) the normal speed.

1 Put in the disc you want to record.

2 Press [REC MODE] repeatedly to select

“NORMAL” or “HI-SPEED” and then press [OK].

3 Press [REC 7/9] to start recording.

Note:

• If you cannot record at high-speed because of the condition

of the disc, record at normal speed.

• The sound is muted during high-speed recording.

█

Adding track marks

When recording from the radio or AUX, you can divide

tracks using various modes.

Before recording

Press [REC MODE] to select the mode.

Note:

• During recording, if you press [OK] or pause recording while

using “TIME MARK” mode, the 5-minute counter is reset.

• You cannot add track marks manually in “SYNCHRO” mode.

Recording MP3 tracks

You can record MP3 tracks from:

• MP3 disc to

USB B or the internal memory

•

USB A to USB B or the internal memory

•

USB B to the internal memory or vice versa

1 Prepare the source you want to record.

2 Press [REC 7/9] to start recording.

To check the recording progress, press [DISPLAY].

Note:

• Some tracks can use a longer time to record.

• Some tracks cannot be recorded because of the condition of

the source.

• The recorded file name is the same as the original file (only

a maximum of 32 characters can be shown on the display

panel).

Deleting the recorded tracks

1 Press [SELECT <, >] repeatedly to select

“MEMORY” or “USB B”.

2 Press [R, T] to select the album.

3 Press [2/3] or [5/6] to select the track.

4 Press [EDIT MODE] to select the mode.

5 Press [OK].

The selected item to be deleted is shown.

6 Press [OK].

“SURE? NO” is shown.

7 Press [Y, U] to select “SURE? YES” and then

press [OK].

“WRITING” is shown.

To cancel, select “SURE? NO”.

Stop recording Press [8]. “WRITING” is shown.

Pause

recording

Press [REC 7/9] during recording.

Press again to continue recording.

Note:

You can pause during recording from the

radio or AUX (except in “SYNCHRO”

mode). A track mark is added every time

you pause (~12).

MANUAL Add a track mark manually.

Press [OK] during recording to add a

track mark.

Note:

Recording is automatically divided in

60-minute per track.

SYNCHRO

(For AUX

source)

Recording starts automatically when

the other equipment starts to play.

Recording pauses when it detects

silence for 3 seconds.

TIME MARK A track is automatically divided at

5-minute intervals.

Record all

tracks

Select “OFF PLAYMODE” (~9).

Record a

specified

album or track

Select “1-ALBUM” or “1-TRACK”

(~9).

Stop recording Press [8].

Recording stops at the last fully

recorded track in the album. For

example, if you stop recording during

the fourth track, only the first three

tracks are recorded.

“NO FILE RECORDED” is shown if no

track is recorded.

TRACK DEL Delete a single track.

ALBUM DEL Delete one album (maximum 999

tracks).

FORMAT Format the USB device.

ALL DEL Delete all albums in the internal

memory.

SC-UA90 E TQBJ2094 En.fm Page 12 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Sound effects

1 Press [SOUND] to select the sound effect.

2 Press [Y, U] to select the setting and then press

[OK].

Illumination

You can switch on or switch off the illumination on the

system.

Press [ILLUMINATION] to select “ON” and then press

[OK].

To cancel, select “OFF”.

DJ functions

You can use the DJ functions to add sound effects or

sample sound between songs.

Note:

The DJ function is switched off when you switch off the

system, change to another source or start recording.

DJ jukebox

USB MEMORY

You can use the DJ jukebox function to add cross-fade

effect or sample sound mix between songs.

1 Press [JUKEBOX] to select “DJ JUKEBOX

SELECT NUMBER” or “ON DJ JUKEBOX”.

To cancel, select “OFF JUKEBOX”.

2 Press [1] to [6] to select the effect and then press

[OK].

To cancel, press the button again.

Using the unit

1 Touch [JUKEBOX] to select “DJ JUKEBOX

SELECT NUMBER” or “ON DJ JUKEBOX”.

To cancel, select “OFF JUKEBOX”.

2 Touch [2/3] or [5/6] to select the effect.

To cancel, select “OFF EFFECT”.

Note:

• The system switches to repeat mode automatically when

you switch on DJ jukebox.

• The cross-fade function may not work between songs that

have different sampling frequencies.

PRESET EQ “ROCK”, “POP”, “AFRO BEAT”,

“ARABIC”, “PERSIAN”, “INDIA

BASS”, “DANGDUT”, “MALAY

POP”, “ELECTRONICA”,

“REGGAETON”, “SALSA”,

“SAMBA”, “FOOTBALL”,

“KARAOKE” or “FLAT”

BASS/MID/TREBLE –4 to +4

Note:

These settings can change when you

select a PRESET EQ setting.

SURROUND “ON SURROUND” or

“OFF SURROUND”

D.BASS LEVEL “OFF”, “LEVEL 1” to “LEVEL 6”

D.BASS BEAT “ON D.BASS BEAT” or

“OFF D.BASS BEAT”

Note:

• This function emphasises the attack

level of the drumbeat and produces

a punchy sound. Depending on the

track, the effect may be small.

• This function does not work when

“D.BASS LEVEL” is set to “OFF”.

Using the “Panasonic MAX Juke” app

You can download and install the free app “Panasonic

MAX Juke” on Google Play™ or App Store

for

additional features, such as to request song playback

from multiple devices simultaneously. You can also call

up the tracks you want to play through the app. For

details on the app, refer to the site below.

http://av.jpn.support.panasonic.com/support/global/

cs/audio/app/

(This site is in English only.)

[1] Cross-fade: The current track volume

gradually becomes soft, and the next

track volume gradually becomes loud.

[2] to [6] Sample sound mix: Sample sound is

added to the intervals of all tracks.

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 13 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

█

Changing the repeat setting

1 Press [PLAY MENU].

2 Press [Y, U] to select the setting and then press

[OK].

Note:

You cannot select the DJ jukebox effect when you are using

“RANDOM MIX REPEAT” mode.

DJ effect

(Except for D-IN and AUX source)

You can use the DJ effect function to add sound effects.

1 Press [DJ] to select “DJ EFFECT SELECT

NUMBER” or “ON DJ EFFECT”.

To cancel, select “OFF EFFECT”.

2 Press [1] to [6] to select the effect.

To cancel, press the button again.

3 Press [Y, U] to select the setting and then press

[OK].

DJ sampler

(Except for D-IN and AUX source)

You can apply a scratch sound or sample sound to the

track you are playing.

1 Press [DJ] to select “SAMPLER SELECT

NUMBER” or “ON SAMPLER”.

To cancel, select “OFF EFFECT”.

2 Press [1] to [6] to select the desired sound.

To cancel, press the button again.

3 Press [Y, U].

Using a microphone

Preparation

Decrease the volume of the system to its minimum before

you connect or disconnect a microphone.

1 Connect a microphone (not supplied) to the

microphone jack.

Plug type: Ø 6.3 mm monaural

2 Press [MIC VOL] and then press [Y, U] to adjust

the volume of the microphone.

3 If you want to sing with the background music,

play the music source and adjust the volume of

the system.

Note:

• If a strange noise (howling) is emitted, move the microphone

away from the speakers, or decrease the volume of the

microphone.

• When you do not use the microphone, disconnect it from the

microphone jack, and decrease the volume of the

microphone to its minimum.

• This system cannot record from microphone.

RANDOM REPEAT

RND

Repeat random playback.

ALL TITLE REPEAT Repeat all tracks.

RANDOM MIX

REPEAT

RND

Repeat random playback. Sample

sound is added to the intervals of

all tracks.

[1] PHASER

Add space and dimension to the sound.

[2] FILTER

Enhance or filter specific ranges of the sound.

[3] SOUND CHOPPER

Cut off the sound periodically.

[4] ELECTRO ECHO

Add digital echo to the sound.

[5] PITCH SHIFTER

Adjust the keys of the sound.

[6] HARMONIZER

Add notes to the sound to create harmony.

Using the “Panasonic MAX Juke” app

You can change the sample sound on the app. (To return

all sample sounds to the factory preset, when in the stop

mode, touch and hold [JUKEBOX] on the unit until

“SAMPLER RESTORED” is shown.)

SC-UA90 E TQBJ2094 En.fm Page 14 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Karaoke

Preparation

Select the music source.

Note:

The Karaoke function is switched off when you switch off the

system or start recording.

Karaoke effect

You can use the Karaoke effect function to add sound

effects.

1 Press [KARAOKE] repeatedly to select the effect.

To check the current setting, press [OK].

2 Press [Y, U] (unit: [2/3] or [5/6]) to

select the setting and then press [OK] (unit: [4/9]).

Note:

• To use Karaoke effect in D-IN source, change the digital

audio output setting on the external equipment to PCM.

• To use Karaoke effect in AUX source, set “AUX MODE” to

“MODE 1” (~17).

Karaoke jukebox

You can use the Karaoke effect while using Karaoke

jukebox.

Press [JUKEBOX] to select “ON KARAOKE

JUKEBOX” and then press [OK].

To cancel, select “OFF JUKEBOX”.

Note:

• The system switches to repeat mode automatically when

you switch on Karaoke jukebox.

• Karaoke jukebox is switched off when you change to another

source.

█

Changing the repeat setting

1 Press [PLAY MENU].

2 Press [Y, U] to select the setting and then press

[OK].

VOCAL

CANCEL

Reduce the vocal level or change the

audio mode (depending on the source).

ECHO Add an echo effect to the sound.

KEY

CONTROL

Change the key of a song.

Note:

The setting is cancelled when you change

to another source.

TEMPO CD USB MEMORY

Change the speed of a song.

BGM Change the background music level.

MIC EQ Select a MIC EQ mode.

OFF

EFFECT

Cancel the effect.

Press [OK] (unit: [4/9]) to confirm.

VOCAL

CANCEL

“OFF”, 1 to 3, “L”, “R”, “L+R”

When using stereo source not

formatted for Karaoke

It is recommended to use “2 VOCAL

CANCEL” for most songs.

When using Karaoke formatted

source

L: Only left channel sound

(accompaniment only)

R: Only right channel sound (vocals

only)

L+R: Left and right channel sounds are

mixed

ECHO “OFF”, 1 to 4

KEY

CONTROL

–6 to +6

TEMPO “OFF”, –2 to +2

BGM “OFF”, 1 to 3

MIC EQ “SINGING” or “SPEECH”

RANDOM REPEAT

RND

Repeat random playback.

ALL TITLE REPEAT Repeat all tracks.

RANDOM MIX

REPEAT

RND

Repeat random playback. Sample

sound is added to the intervals of

all tracks.

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 15 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Clock and timers

Setting the clock

This is a 24-hour clock.

1 Press [SETUP] to select “CLOCK”.

2 Press [Y, U] to set the time and then press [OK].

To check the time

Press [SETUP] to select “CLOCK” and then press

[OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP] to select the setting (in minutes).

To cancel, select “OFF”.

To check the remaining time

Press [SLEEP].

Note:

• The remaining time is shown for a few seconds every

minute. “SLEEP 1” is always shown when only 1 minute

remains.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

Play timer and record timer

(Except for Bluetooth

, D-IN and AUX source)

You can set the timer to come on at a certain time to:

• Wake you up (play timer).

• Record from the radio (record timer).

Play timer and record timer cannot be used together.

Preparation

Set the clock.

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [Y, U] to select “#PLAY” or “#REC” and

then press [OK].

3 Press [Y, U] to set the start time and then press

[OK].

4 Do step 3 again to set the end time.

5 For play timer, press [Y, U] to select the source

you want to play and then press [OK].

6 For record timer, press [Y, U] to select “MEMORY”

or “USB B” to keep the recording and then press

[OK].

To start the timer

1 Prepare the source.

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [Y, U] to select the setting and then press

[OK].

“#” is shown.

The system must be switched off for the timer to

operate.

To check the setting

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [Y, U] to select “#PLAY” or “#REC” and

then press [OK].

In standby mode, press [DISPLAY] two times.

Note:

• The play timer starts at a low volume and increases

gradually to the preset level.

• The record timer starts 30 seconds before the set time with

the volume muted.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and then switch on again while a

timer is in operation, the timer will not stop at the end time.

SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120

OFF

Play timer Prepare the source you want to listen

to (disc, USB, internal memory or

radio) and set the volume.

Record timer Connect the USB device to USB B (for

USB recording) and tune in to the

radio station.

PLAY ON Start the play timer.

PLAY OFF Cancel the play timer.

REC ON Start the record timer.

REC OFF Cancel the record timer.

SC-UA90 E TQBJ2094 En.fm Page 16 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

External equipment

Preparation

• Disconnect the AC mains lead.

• Switch off all equipment and read the appropriate

operating instructions.

Note:

• Do not bend cables at sharp angles.

• Components and cables are sold separately.

• Sound distortion can occur when you use an adaptor.

• If you want to connect equipment other than those

described, refer to the audio dealer.

Using the optical input

You can connect a TV, VCR, DVD player etc., and listen to

the audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “D-IN”.

3 Play the external equipment.

Note:

• This system supports linear PCM and Dolby Digital signals.

• Multi-channel source will be converged to 2 channels.

• Sampling frequency: 32 kHz (PCM), 44.1 kHz (PCM) and

48 kHz

• The sound is muted if the signal format or frequency is not

supported.

• If there are sounds coming from the TV’s speakers,

decrease the volume of the TV to its minimum.

Using the auxiliary input

You can connect a VCR, DVD player etc., and listen to the

audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “AUX”.

3 Play the external equipment.

█

AUX mode

1 Press [PLAY MENU] to select “AUX MODE”.

2 Press [Y, U] to select the mode and then press

[OK].

Rear panel

of this unit

Optical digital

audio cable

(not supplied)

TV (not supplied)

MODE 1 Select this mode to use the Karaoke effect

function.

MODE 2

(default)

Select this mode when watching TV, movies

or using an external player with Karaoke

features.

Rear panel

of this unit

Audio cable

(not supplied)

DVD player (not supplied)

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 17 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

Others

Auto off

This system automatically switches off when you do not

use it for approximately 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [Y, U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

• This function does not work when you are in radio source or

when a Bluetooth

device is connected.

• This function may not work when a microphone is

connected.

Bluetooth

standby

This function automatically switches on the system when

you establish a Bluetooth

connection from a paired

device.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [Y, U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you are

connected to a Bluetooth

device before switching off the

system, wait for a minimum of 5 seconds before connecting to

this system from your Bluetooth

device again.

Touch sound

The system beeps when you touch any touch key on the

unit.

1 Press [SETUP] repeatedly to select “BUZZER”.

2 Press [Y, U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

This function works even when the system is muted.

Software update

Occasionally, Panasonic may release updated software

for this unit that may add or improve the way a feature

operates. These updates are available free of charge. For

more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

█

Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.”

and then press [OK].

The software version is shown.

2 Press [OK] again to exit.

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult your

dealer for instructions.

█

Common problems

The unit does not work.

• The safety device has been activated. Do the following:

1. Touch [1] on the unit to switch the unit to standby mode.

If the unit does not switch to standby mode, disconnect

the AC mains lead and then connect it again.

2. Touch [1] again to switch on the unit. If the problem

persists, consult your dealer.

The display panel lights up and changes continuously in

standby mode.

• Touch and hold [8] on the unit to select “DEMO OFF”.

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause, and

then switch on again. It can be caused by straining of the

speakers through excessive volume or power, and when

using the system in a hot environment.

A humming sound can be heard during playback.

• An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

The sound level reduces.

• The protection circuit has been activated due to the

continuous use at high volume output. This is to protect the

system and maintain the sound quality.

█

Disc

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or non-standard.

• There is condensation. Let the system dry for 1 to 2 hours.

The total number of tracks shown is incorrect.

The disc cannot be read.

Distorted sound is heard.

• You put in a disc that the system cannot play. Change to a

playable disc.

• You put in a disc that has not been finalised.

SC-UA90 E TQBJ2094 En.fm Page 18 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

█

USB

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it are not

compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

█

Bluetooth

Pairing cannot be done.

• Check the Bluetooth

device condition.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do pairing

again.

• The pairing of the device has been replaced. Do pairing

again.

• This system might be connected to a different device.

Disconnect the other device and try connecting the device

again.

• The system may have a problem. Switch off the system and

then switch on again.

• If “MODE 2” is selected in “LINK MODE”, select “MODE 1”

(~10).

The device is connected but audio cannot be heard

through the system.

• For some built-in Bluetooth

devices, you have to set the

audio output to “SC-UA90” manually. Read the operating

instructions of the device for details.

Sound from the device is interrupted.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

• Remove any obstacle between the system and the device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.) are

interfering. Move the device nearer to the system and

distance it from the other devices.

• Select “MODE 1” for stable communication (~10).

█

Radio

Sound is distorted.

• Use an optional FM outdoor antenna. The antenna should

be installed by a competent technician.

A beat sound is heard.

• Switch off the TV or move it away from the system.

• Move mobile telephones away from the system if the

interference is apparent.

█

D-IN, AUX

Playback image and sound are not synchronised.

• When in AUX source, set “AUX MODE” to “MODE 2”.

Karaoke effect cannot be used.

• When in D-IN source, change the digital audio output setting

on the external equipment to PCM.

• When in AUX source, set “AUX MODE” to “MODE 1”.

█

Unit displays

“--:--”

• You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

• Track play time is more than 99 minutes.

“ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“ADJUST TIMER”

• The play timer and/or record timer is not set. Adjust the play

timer and/or record timer.

“ALB FULL”

• The number of albums has exceeded the supported limit.

“AUDIO UNSUPPORTED”

• The signal format or frequency is not supported.

• This system does not support bitstream signals. Change the

digital audio output setting on the external equipment to

PCM.

• This system supports sampling frequencies of 32 kHz

(PCM), 44.1 kHz (PCM) and 48 kHz. Select only the

supported sampling frequencies on the connected

equipment.

• Try connecting the external equipment by using the auxiliary

input.

“AUTO OFF”

• The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button or

touch any touch key.

“CAN’T REC”

“DEVICE FULL”

• You cannot do recording because the remaining recording

time of the USB device is less than the total time of the

music source. Change to a USB device which has enough

recording time and do the recording again.

• You cannot do recording because the USB device is

write-protected. Remove the write protection of the USB

device and try again.

“ERROR”

• An incorrect operation was done. Read the instructions and

try again.

“ERROR” (during recording)

• You cannot select other playback source (example: radio,

USB etc.) or press [2/3] or [5/6] during

recording. Stop the recording function.

“F” / “F” (“” represents a number.)

• The protection circuit has been activated and the system

may be switched off automatically.

• Disconnect the AC mains lead and wait for a few seconds

before connecting it again. If the problem persists,

disconnect the AC mains lead and consult your dealer.

“INSERT USB B”

• You cannot do recording because there is no USB device

connected to

USB B .

“MEMORY ERROR”

• The files in the internal memory can be corrupted. Switch off

the system and then disconnect the AC mains lead. Wait for

a minimum of 1 minute before switching on the system

again. If the problem persists, press [EDIT MODE] to select

“ALL DEL” to delete all albums in the internal memory and

do recording again.

“NO DEVICE”

• You cannot check available storage space because there is

no USB device connected to

USB B .

“NO DISC”

• You have not put in a disc.

ENGLISH

SC-UA90 E TQBJ2094 En.fm Page 19 Monday, May 28, 2018 11:08 AM

TQBJ2094

\\10.1.1.5\fle\DTP\PJM\SC-UA90.70\SC-UA90 E TQBJ2094 En.fm

“NO PLAY”

“UNSUPPORT”

• There is no album or track in the USB device.

• Examine the content. You can only play supported format.

• The files in the USB device can be corrupted. Format the

USB device and try again.

• The system may have a problem. Switch off the system and

then switch on again.

“NO TRACK”

• There is no album or track in the internal memory.

“NOT SUPPORTED”

• To use Karaoke effect in D-IN source, change the digital

audio output setting on the external equipment to PCM.

• To use Karaoke effect in AUX source, set “AUX MODE” to

“MODE 1”.

“PLAYERROR”

• An unsupported MP3 file has been played. The system will

skip that track and play the next one.

“REC ERROR”

• You disconnected the USB device during recording. Connect

the USB device and do recording again.

• An error occurred during USB recording. Disconnect the

USB device and then connect it again.

“REMOTE 1”

“REMOTE 2”

• The remote control and the unit are using different codes.

Change the code of the remote control.

– When “REMOTE 1” is shown, press and hold [OK] and [1]

for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold [OK] and [2]

for a minimum of 4 seconds.

“TRK FULL”

• The number of files has exceeded the supported limit.

“USB A NO DEVICE”

“USB B NO DEVICE”

• The USB device is not connected. Examine the connection.

“USB OVER CURRENT ERROR”

• The USB device is drawing too much power. Disconnect the

USB device, switch off the system and then switch on again.

• Check the connection, it may be caused by a faulty USB

cable.

“VBR”

• The system cannot show the remaining play time for variable

bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to the remote

control of this system, change the remote control code for

this system.

Preparation

Touch [SELECT] repeatedly on the unit to select “AUX”.

█

To set the code to “REMOTE 2”

1 Touch and hold [SELECT] on the unit and [2] on

the remote control until “REMOTE 2” is shown.

2 Press and hold [OK] and [2] for a minimum of

4 seconds.

█

To set the code to “REMOTE 1”

1 Touch and hold [SELECT] on the unit and [1] on

the remote control until “REMOTE 1” is shown.

2 Press and hold [OK] and [1] for a minimum of

4 seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed or

when touch keys are touched.

• You want to clear and reset the memory contents.

1 Touch and hold [1] on the unit until “RESET?” is

shown.

2 While you touch and hold [1] on the unit, touch

[SELECT].

“RESET” is shown.

After “–––––––––” is shown, the unit will switch

off automatically.

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

SC-UA90 E TQBJ2094 En.fm Page 20 Monday, May 28, 2018 11:08 AM

Stránka sa načítava ...

Panasonic SCUA90E Návod na používanie

Značka: Panasonic

Model: SCUA90E

Typ: Návod na používanie

Stiahnite si PDF

správa

V iných jazykoch

English: Panasonic SCUA90E Operating instructions
polski: Panasonic SCUA90E Instrukcja obsługi

Panasonic SCUA90E Návod na používanie

Panasonic SCUA90E Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty