Parkside PSE 2800 A1 Operation and Safety Notes

PSE 2800 A1

4



GENERATOR

Operation and Safety Notes

Original operating instructions



ELEKTRIČNI AGREGAT

Navodila za upravljanje in varnostna opozorila

Originalna navodila za uporabo



ÁRAMFEJLESZTŐ

Kezelési és biztonsági utalások

Eredeti használati utasítás



GENERÁTOR

Pokyny pro obsluhu a bezpečnostní pokyny

Originální návod k obsluze



GENERÁTOR

Pokyny pre obsluhu a bezpečnostné pokyny

Originálny návod na obsluhu

  

STROMERZEUGER

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung



PRĄDNICA SPALINOWA

Wskazówki dotyczące obsługi i bezpieczeństwa

Instrukcją oryginalną

Anleitung_4152412_LB4:_ 26.10.2011 16:16 Uhr Seite 1

2

GENERATOR

ELEKTRIČNI AGREGAT

ÁRAMFEJLESZTŐ

GENERÁTOR

STROMERZEUGER

PRĄDNICA SPALINOWA



Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.



Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik

funkcióját.



Pred branjem stran s slikami odprite navzven in se nato seznanite z vsemi funkcijami naprave.



Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.



Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.



Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z

wszystkimi funkcjami urządzenia.

  

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit

allen Funktionen des Gerätes vertraut.

GB Operation and Safety Notes Page 7

HU Kezelési és biztonsági utalások Oldal 18

SI Navodila za upravljanje in varnostna opozorila Stran 30

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 41

SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 52

PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 63

DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 75

Anleitung_4152412_LB4:_ 26.10.2011 16:16 Uhr Seite 2

GENERATOR

ELEKTRIČNI AGREGAT

ÁRAMFEJLESZTŐ

GENERÁTOR

STROMERZEUGER

PRĄDNICA SPALINOWA

2

1

11

13

12

L

3

4

3

5

6

2

67

8

910 5

3

4

3

Anleitung_4152412_LB4:_ 26.10.2011 16:17 Uhr Seite 3

7

4

8

5

9

21

22

24

23

19 20

14

21

15

19

19 23

18

14

17

E

22

23

25

26

15

16

17

21

4

6

20

23

20

23

16

Anleitung_4152412_LB4:_ 26.10.2011 16:17 Uhr Seite 4

13

12

14

10 11

8

A

D

9

7

B

C

5

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 5

15

1

2

3

4

6

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 6

Table of contents Page

1. Introduction ............................................................................8

2. Safety Information ..................................................................8-9

3. Layout ....................................................................................9

4. Intended use ...........................................................................9

5. Technical data.........................................................................10

6. Before starting the equipment ................................................10

7. Operation ................................................................................11

8. Cleaning, maintenance, storage, transport

and ordering of spare parts .....................................................12-13

9. Disposal and recycling ............................................................13

10. Troubleshooting guide ............................................................14

11. Maintenance schedule ............................................................15

12. Declaration of conformity ........................................................16

13. Guarantee certificate ..............................................................17

The reprinting or reproduction by any other

means, in whole or in part, of documentation

and papers accompanying products is

permitted only with the express consent of ISC

GmbH.

Technical changes subject to change

GB

7

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 7

8

GB

1. Introduction

 Important.

When using the equipment, a few safety

precautions must be observed to avoid injuries

and damage. Please read the complete

operating instructions and safety information

with due care. Keep this manual in a safe place

so that the information is available at all times. If

you give the equipment to any other person,

hand over these operating instructions and the

safety information as well. We cannot accept

any liability for damage or accidents which arise

due to a failure to follow these instructions and

the safety information.

2. Safety Information

 No changes may be made to the generator.

 Only original parts may be used for

maintenance and accessories.

 Important: Danger of poisoning. Emissions,

fuels and lubricants are toxic. Do not inhale

emissions.

 Children are to be kept away from the

generator.

 Important: Risk of burns. Do not touch the

exhaust system or drive unit.

 Wear suitable ear protection when in the

vicinity of the equipment.

 Important: Petrol and petrol fumes are highly

combustible or explosive.

 Never operate the generator in non-

ventilated rooms or in a highly inflammable

environment. If you intend to operate the

generator in rooms with good ventilation, the

exhaust gases must be channeled directly

outdoors through an exhaust hose.

Important: Toxic exhaust gases can escape

despite the exhaust hose. Due to the fire

hazard, never direct the exhaust hose

towards inflammable materials.

 Risk of explosion: Never operate the

generator in rooms with combustible

materials.

 The speed preset by the manufacturer is not

allowed to be changed. The generator or

connected equipment may be damaged.

 Secure the generator against shifting and

toppling during transport.

 Place the generator at least 1m away from

walls and equipment connected to them.

 Place the generator in a secure, level

position. Do not turn, tip or change the

generator’s position while it is working.

 Always switch off the engine when

transporting and refueling the generator.

 Make sure that when you refuel the

generator no fuel is spilt on the engine or

exhaust pipe.

 Never operate the generator in rain or snow.

 Never touch the generator with wet hands.

 Guard against electric danger.

 When working outdoors, use only extension

cables that are approved for outdoor use

and which are marked accordingly

(H07RN..).

 The overall length of the extension cables

used is not allowed to exceed 50 m for 1.5

mm² and 100 m for 2.5 mm².

 No changes may be made to the settings of

the motor or generator.

 Repairs and adjustment work may only be

carried out by authorized trained personnel.

 Do not refuel or empty the tank near open

lights, fire or sparks. Do not smoke!

 Do not touch any mechanically driven or hot

parts. Do not remove the safety guards.

 Do not expose the equipment to damp or

dust. Permissible ambient temperature -10

to +40°, altitude: 1000 m above sea level,

relative humidity: 90 % (non-condensing)

 The generator is driven by a combustion

engine, which produces heat in the range of

the exhaust (on the opposite side of the

socket) and exhaust outlet. You should

therefore avoid coming near these surfaces

because of risk of skin burns.

 The values quoted in the technical data

under sound power level (LWA) and sound

pressure level (LpA) are emission values

and not necessarily reliable workplace

values. As there is a correlation between

emission and immission levels, the values

cannot be taken to reliably determine the

possible need for additional precautions.

Factors influencing the current immission

level of the user/operator include the

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 8

properties of the work area, other sound

sources etc., e.g. the number of machines

and other neighboring processes, and the

time span over which the user/operator is

subjected to the noise. Also, the permitted

immission level can vary from country to

country. Nevertheless, this information

makes it possible for the user to be able to

make a better assessment of the dangers

and risks involved.

Important: Use only normal, unleaded

petrol as fuel.

 CAUTION

Read all the safety regulations and

instructions. Any errors made in following the

safety regulations and instructions may result in

an electric shock, fire and/or serious injury.

Keep all safety regulations and instructions

in a safe place for future use.

Explanation of the warning signs on the

equipment (Fig. 15)

1. Important. Read the operating instructions.

2. Important. Hot parts. Keep your distance.

3. Important. Switch off the engine before

refueling.

4. Important. Never operate in non-ventilated

rooms.

3. Layout (Fig. 1-5)

1 Tank indicator

2 Tank cover

3 2 x 230 V~ socket-outlets

4 Earth connection

5 Overload cut-out

6 Voltmeter

7 Oil filler screw

8 Oil drainage screw

9 Oil shortage cut-out

10 On/Off switch

11 Choke lever

12 Reversing starter

13 Petrol cock

14 Wheels

15 Axle

16 Foot

17 Push bar holder

18 Push bar

19 Screws size M8 x 40

20 Screws size M8 x 16

21 Washers for wheels

22 Securing split pins for wheels

23 Nuts M8

24 Screwdriver

25 Spark plug wrench

26 Oil filler funnel

4. Intended use

The device is designed for applications

operated with a 230 V alternating current

source.

Be sure to observe the restrictions in the safety

instructions. The generator is intended to

provide electric power tools and light sources

with electricity. When using the device with

household appliances, please check their

suitability in accordance with the relevant

manufacturer’s instructions. In case of doubt,

ask an authorized dealer of the respective

equipment.

The equipment is to be used only for its

prescribed purpose. Any other use is deemed

to be a case of misuse. The user/operator and

not the manufacturer will be liable for any

damage or injuries of any kind caused as a

result of this.

Please note that our equipment has not been

designed for use in commercial, trade or

industrial applications. Our warranty will be

voided if the equipment is used in commercial,

trade or industrial businesses or for equivalent

purposes.

GB

9

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 9

5. Technical data

Generator: Synchronous

Protection type: IP23

Continuous rated power P

rated

(S1): 2600 W

Maximum power P

max

(S2 2 min): 2800 W

Rated voltage U

rated

: 2 x 230V~

Rated current I

rated

: 11.3 A

Frequency F

rated

: 50 Hz

Drive engine design: 4-stroke, air-cooled

Displacement: 207.7 cm³

Fuel: Petrol

Tank capacity: 15 l

Engine oil: approx. 0.6 l (15W40)

Consumption at 2/3 load: approx. 1.36 l/h

Weight: 42 kg

L

pA

sound pressure level: 76 dB(A)

L

WA

sound power level 96 dB(A)

K uncertainty: 2.07 dB(A)

Power factor cos ϕ: 1

Power class: G1

Max. temperature: 40°C

Max. altitude (above mean sea level): 1,000 m

Spark plug: F7 RTC

Operating mode S1 (continuous operation)

The equipment can be continuously operated

with the quoted power output.

Operating mode S2 (temporary operation)

The equipment may be temporarily operated

with the quoted power output (2 min).

6. Before starting the equipment

6.1 Assembly

The installation of the equipment requires two

open-ended wrenches (size 12).

 Assemble the foot (16), wheels (14) and

push bar (18) as shown in Figures 6-9.

 Assemble all parts before filling in fuel and

oil in order to prevent the fluids from leaking

out.

 To mount the wheels, first slide the axle (15)

through the mountings on the bottom of the

generator and fit the wheels (14) as shown

on Figure 7.

 When fitting the push bar (18) check that the

angled side (Fig. 9/Item E) is pointing

outwards to ensure that the swing up

function works properly.

6.2 Electrical safety

 Electric supply cables and connected

equipment must be in perfect condition.

 The generator is to be operated only with

equipment whose voltage specifications

conform to the generator’s output voltage.

 Never connect the generator to the power

supply (socket-outlet).

 Keep the cable length to the consumer as

short as possible.

6.3 Environmental protection

 Dispose of soiled maintenance material and

operating materials at the appropriate

collection point.

 Recycle packaging material, metal and

plastics.

6.4 Connecting to earth

The housing must be connected to earth in

order to discharge static electricity. To do this,

connect one end of a cable to the earth

connection on the generator (Fig. 3/Item 4) and

the other end to an external earth.

GB

10

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 10

GB

11

7. Operation

Important. You must fill up with engine oil

(approx. 0.6 l) and fuel before you can start the

engine.

 Check the fuel and engine oil levels and top

up if necessary.

 Make sure that the generator has sufficient

ventilation

 Make sure that the ignition cable is secured

to the spark plug.

 Inspect the immediate vicinity of the

generator.

 Disconnect any electrical equipment which

may already be connected to the generator.

7.1 Starting the engine

Important.

When starting with the reserve starter (12), the

motor may recoil suddenly as it starts up,

resulting in hand injuries. Wear protective

gloves when starting the equipment.

 Open the petrol cock (13) by turning it down

 Set the ON/OFF switch (10) to the “ON”

position

 Move the choke lever (11) to position I Ø I.

 Start the engine with the reversing starter

(12), by pulling forcefully on the handle. If

the engine does not start, pull the handle

again.

 Push the choke lever (11) back after the

engine has started.

7.2 Connecting consumers to the generator

 Connect the equipment you want to use to

the 230 V~sockets (3).

Important: These sockets may be loaded

continuously (S1) with 2600W and temporarily

(S2) for a maximum of 2 minutes with 2800W.

 The generator is suitable for 230 V~ AC

appliances only.

 Do not connect the generator to the

household mains system as this may result

in damage to the generator itself or to other

electrical appliances in your home.

Note: Some electrical appliances (power

jigsaws, drills, etc.) may have a higher level of

power consumption when used in difficult

conditions

7.3 Switching off the engine

 Before you switch off the generator, allow it

to run briefly with no consumers so that it

can “cool down”.

 Set the ON/OFF switch (10) to the “OFF”

position.

 Close the petrol cock (13).

7.4 Overload cut-out 2 x 230 V socket-

outlets

Important. The generator is fitted with an

overload cut-out.

This shuts down the sockets (3). You can

restart the sockets (3) by pressing the overload

cut-out (5).

Important. If this happens, reduce the

electric power you are taking from the

generator or remove any defective

connected appliances.

Important. Defective overload cut-outs

must be replaced only by overload cut-outs

of identical design and with the same

performance data. If repairs are necessary,

please contact your customer service

center.

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 11

GB

12

8. Cleaning, maintenance,

storage, transport and

ordering of spare parts

Switch off the motor and pull the spark plug

boot from the spark plug before doing any

cleaning and maintenance work on the

equipment.

Important: Switch off the equipment

immediately and contact your service

station:

 In the event of unusual vibrations or noise

 If the engine appears to be overloaded or

misfires

8.1 Cleaning

 Keep all safety devices, air vents (Fig.

2/Item L) and the motor housing free of dirt

and dust as far as possible. Wipe the

equipment with a clean cloth or blow it down

with compressed air at low pressure.

 We recommend that you clean the

equipment immediately after you use it.

 Clean the equipment regularly with a damp

cloth and some soft soap. Do not use

cleaning agents or solvents; these may be

aggressive to the plastic parts in the

equipment. Ensure that no water can get

into the interior of the equipment.

8.2 Air filter

In this connection, please also read the service

information.

 Clean the air filter at regular intervals, and

replace it if necessary.

 Open both clips (Fig. 11/A) and remove the

air filter cover (Fig. 11/B).

 Remove the filter elements (Fig. 12/C)

 Do not use abrasive cleaning agents or

petrol to clean the elements.

 Clean the elements by tapping them on a

flat surface. In cases of stubborn dirt first

clean with soapy water, then rinse with clear

water and air-dry.

 Assemble in reverse order.

8.3 Spark plug (Fig. 13-14)

Check the spark plug for dirt and grime after 20

hours of operation and if necessary clean it with

a copper wire brush. Thereafter service the

spark plug after every 50 hours of operation.

 Pull off the spark plug boot (Fig. 13) by

twisting.

 Remove the spark plug (Fig. 14/D) with the

supplied spark plug wrench (25).

 Assemble in reverse order.

8.4 Changing the oil and checking the oil

level (before using the equipment)

The motor oil is best changed when the motor

is at working temperature.

 Only use motor oil (15W40).

 Place the generator on a slightly inclined

surface so that the oil drainage screw (8) is

at the lower end.

 Open the oil filler screw (7).

 Open the oil drainage screw and let the hot

engine oil drain out into a drip tray.

 After the old oil has drained out, close the oil

drainage screw and place the generator on

a level surface again

 Fill in engine oil up to the top mark on the oil

dip stick (approx. 0.6 liters).

 Important: Do not screw the dipstick (oil filler

screw) in to check the oil level, simply insert

it up to the thread.

 Dispose of the waste oil properly.

8.5 Automatic oil cut-out

The automatic oil cut-out responds if there is

too little oil in the engine. In this case it will not

be possible to start the engine or it will cut out

automatically after a short period of time. It

cannot be started again until the engine oil has

been topped up (see point 8.4).

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 12

8.6 Preparing the equipment for long-term

storage

Warning: Do not empty the petrol tank in

enclosed areas, near fire or when smoking.

Petrol fumes can cause explosions and fire.

 Empty the petrol tank using a petrol suction

pump.

 Start the engine and run it until the tank and

fuel line are completely empty and the

engine stalls.

 Change the oil after each season. To do so,

remove the used engine oil when the engine

is warm and refill new oil.

 Remove the spark plug (Fig. 14/Item D).

Use an oil can to fill the cylinder with

approx. 20 ml of oil. Slowly pull back the

starter cord, which will bathe the cylinder

wall with oil. Screw the spark plug back in.

 Be sure to clean the entire equipment to

protect the paint.

 Store the equipment in a well-ventilated

place or location.

8.7 Preparing the equipment for transport

 Empty the petrol tank using a petrol suction

pump.

 Always let the engine run until it has used

up the remainder of petrol in the tank.

 Empty the engine oil from the warm engine.

 Remove the spark plug boot (Fig. 13) from

the spark plug.

 Secure the equipment, e.g. with straps,

against shifting.

8.8 Ordering replacement parts

Please provide the following information on all

orders for spare parts:

 Model/type of the equipment

 Article number of the equipment

 ID number of the equipment

For our latest prices and information please go

to www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to

prevent it from being damaged in transit. The

raw materials in this packaging can be reused

or recycled. The equipment and its accessories

are made of various types of material, such as

metal and plastic. Defective components must

be disposed of as special waste. Ask your

dealer or your local council.

For EU countries only

Never place any electric power

tools in your household refuse.

To comply with European Directive 2002/96/EC

concerning old electric and electronic

equipment and its implementation in national

laws, old electric power tools have to be

separated from other waste and disposed of in

an environment-friendly fashion, e.g. by taking

to a recycling depot.

Recycling alternative to the return request:

Instead of returning the equipment to the

manufacturer, the owner of the electrical

equipment is obliged to ensure that the

equipment is properly disposed of if he

abandons ownership. The old equipment can

be returned to a suitable collection point, that

will dispose of the equipment in accordance

with the national recycling and waste disposal

regulations. This does not apply to any

accessories or aids without electrical

components supplied with the old equipment .

GB

13

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 13

10. Troubleshooting guide

Fault Cause Remedy

Engine does not start Automatic oil cut-out has not

responded

Spark plug fouled

No fuel

Check oil level, top up engine

oil

Clean or replace spark plug

(electrode spacing 0.6 mm)

Refuel / have the petrol cock

checked

Generator has too little or no

voltage

Controller or capacitor

defective

Overcurrent circuit-breaker has

triggered

Air filter dirty

Contact your dealer

Actuate the circuit-breaker and

reduce the consumers

Clean or replace the filter

GB

14

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 14

11. Maintenance schedule

Please adhere to the following maintenance periods in order to ensure a failure-free operation.

Important. The equipment must be filled with engine oil and fuel before it is started.

Important: The positions marked with “x*“ should only be carried out by an authorized dealer.

Before each

use

After an

operating

period of 20

hours

After an

operating

period of 50

hours

After an

operating

period of 100

hours

After an

operating

period of 300

hours

Checking the

engine oil

x

Changing the

engine oil

For the first

time, then

every 50

hours

x

Checking the air

filter

x

Change the

filter insert if

necessary

Cleaning the air

filter

x

Cleaning the

petrol filter

x

Visual inspection

of the equipment

x

Cleaning the

spark plug

Distance: 0.6

mm, replace if

necessary

Checking and

readjusting the

throttle vale on

the carburetor

x*

Cleaning the

cylinder head

x*

Set the valve play

x*

GB

15

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 15

12. Declaration of conformity

GB

16

k erklärt folgende Konformität gemäß EU-Richtlinie und

Normen für Artikel

t explains the following conformity according to EU

directives and norms for the following product

p déclare la conformité suivante selon la directive CE et les

normes concernant l’article

C dichiara la seguente conformità secondo la direttiva UE e

le norme per l’articolo

N verklaart de volgende overeenstemming conform EU

richtlijn en normen voor het product

m declara la siguiente conformidad a tenor de la directiva y

normas de la UE para el artículo

O declara a seguinte conformidade, de acordo com a

directiva CE e normas para o artigo

l attesterer følgende overensstemmelse i medfør af

EU-direktiv samt standarder for artikel

U förklarar följande överensstämmelse enl. EU-direktiv och

standarder för artikeln

q vakuuttaa, että tuote täyttää EU-direktiivin ja standardien

vaatimukset

. tõendab toote vastavust EL direktiivile ja standarditele

j vydává následující prohlášení o shodě podle směrnice

EU a norem pro výrobek

X potrjuje sledečo skladnost s smernico EU in standardi za

izdelek

W vydáva nasledujúce prehlásenie o zhode podľa smernice

EÚ a noriem pre výrobok

A a cikkekhez az EU-irányvonal és Normák szerint a

következő konformitást jelenti ki

P deklaruje zgodność wymienionego poniżej artykułu z

następującymi normami na podstawie dyrektywy WE.

e декларира съответното съответствие съгласно

Директива на ЕС и норми за артикул

H paskaidro šādu atbilstību ES direktīvai un standartiem

G apibūdina šį atitikimą EU reikalavimams ir prekės

normoms

Q declară următoarea conformitate conform directivei UE

şi normelor pentru articolul

z δηλώνει την ακόλουθη συμμόρφωση σύμφωνα με την

Οδηγία ΕΚ και τα πρότυπα για το προϊόν

B potvrđuje sljedeću usklađenost prema smjernicama EU

i normama za artikl

Izjava o sukladnosti za ovaj proizvod dostupna je na

internet stranici www.lidl.hr.

f potvrđuje sljedeću usklađenost prema smjernicama EU

i normama za artikl

4 potvrđuje sledeću usklađenost prema smernicama EZ i

normama za artikal

T следующим удостоверяется, что следующие

продукты соответствуют директивам и нормам ЕС

1 проголошує про зазначену нижче відповідність

виробу директивам та стандартам ЄС на виріб

Z Ürünü ile ilgili AB direktifleri ve normları gereğince

aşağıda açıklanan uygunluğu belirtir

L erklærer følgende samsvar i henhold til EU-direktivet

og standarder for artikkel

E Lýsir uppfyllingu EU-reglna og annarra staðla vöru

Konformitätserklärung

Einhell Germany AG · Wiesenweg 22 · D-94405 Landau/Isar

Stromerzeuger PSE 2800 A1 (Parkside)

Standard references: EN 12601; EN 55012; EN 61000-6-1

Landau/Isar, den 14.09.2011

First CE: 11 Archive-File/Record: NAPR003981

Art.-No.: 41.524.12 I.-No.: 11031 Documents registrar: Markus Jehl

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

Weichselgartner/General-Manager Frank/Product-Management

x

2006/42/EC

2004/26/EC

Emission No.: e11*97/68SA*2004/26*1338*00

2000/14/EC_2005/88/EC

Annex IV

Notified Body:

Notified Body No.:

Reg. No.:

Annex V

Annex VI

Noise: measured L

WA

= 93,93 dB (A); guaranteed L

WA

= 96 dB (A)

P = KW; L/Ø = cm

Notified Body: TÜV SÜD Industrie Service GmbH, Westendstrasse 199,

80686 München, Deutschland (Notified Body 0036)

x

87/404/EC_2009/105/EC

2005/32/EC_2009/125/EC

2006/95/EC

2006/28/EC

2004/108/EC

2004/22/EC

1999/5/EC

97/23/EC

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

2011/65/EC

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 16

13. GUARANTEE CERTIFICATE

Dear Customer,

All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely

event that your device develops a fault, please contact our service department at the address shown on this

guarantee card. Of course, if you would prefer to call us then we are also happy to offer our assistance under

the service number printed below. Please note the following terms under which guarantee claims can be made:

1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights.

We do not charge you for this guarantee.

2. Our guarantee only covers problems caused by material or manufacturing defects, and it is restricted to the

rectification of these defects or replacement of the device. Please note that our devices have not been

designed for use in commercial, trade or industrial applications. Consequently, the guarantee is invalidated

if the equipment is used in commercial, trade or industrial applications or for other equivalent activities. The

following are also excluded from our guarantee: compensation for transport damage, damage caused by

failure to comply with the installation/assembly instructions or damage caused by unprofessional

installation, failure to comply with the operating instructions (e.g. connection to the wrong mains voltage or

current type), misuse or inappropriate use (such as overloading of the device or use of non-approved tools

or accessories), failure to comply with the maintenance and safety regulations, ingress of foreign bodies

into the device (e.g. sand, stones or dust), effects of force or external influences (e.g. damage caused by

the device being dropped) and normal wear resulting from proper operation of the device. This applies in

particular to rechargeable batteries for which we nevertheless issue a guarantee period of 12 months.

The guarantee is rendered null and void if any attempt is made to tamper with the device.

3. The guarantee is valid for a period of 3 years starting from the purchase date of the device. Guarantee

claims should be submitted before the end of the guarantee period within two weeks of the defect being

noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee

period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts fitted will not result in an extension of the guarantee period, and no new

guarantee will become active for the work performed or parts fitted. This also applies when an on-site

service is used.

4. In order to assert your guarantee claim, please send your defective device postage-free to the address

shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of

purchase. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if

you could describe the nature of the problem in as much detail as possible. If the defect is covered by our

guarantee then your device will either be repaired immediately and returned to you, or we will send you a

new device.

Of course, we are also happy offer a chargeable repair service for any defects which are not covered by the

scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send

the device to our service address.

GB

17

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 17

18

HU

Tartalomjegyzék Oldal

1. Bevezetés ..............................................................................19

2. Biztonsági utasítások .............................................................19-20

3. A készülék leírása ..................................................................20

4. Rendeltetésszerűi használat ..................................................21

5. Technikai adatok ....................................................................21

6. Beüzemeltetés előtt ................................................................22

7. Kezelés ..................................................................................22-23

8. Tisztítás, karbantartás, tárolás, szállitás és

pótalkatrészmegrendelés .......................................................23-24

9. Megsemmisítés és újrahasznosítás ........................................25

10. Hibakeresési tervrajz ..............................................................26

11. Karbantartási terv ...................................................................27

12. Konformkijelentés ..................................................................28

13. Garanciaokmány ....................................................................29

A termékek dokumentációjának és a

kisérőpapírjainak az utánnyomtatása vagy

egyébb sokszorosítása, kivonatosan is csak az

ISC GmbH kihangsúlyozott beleegyezésével

engedélyezett.

Technikai változtatások jogát fenntartva

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 18

19

HU

1. Bevezetés

 Figyelem!

A készülékek használatánál, a sérülések és a

károk megakadályozásának az érdekébe be

kell tartani egy pár biztonsági intézkedést. Ezért

ezt a használati utasítást/biztonsági

utasításokat gondosan átolvasni. Őrizze ezeket

jól meg, azért hogy mindenkor a

rendelkezésére álljanak az információk. Ha

más személyeknek adja át a készüléket, akkor

kérjük kézbesítse ki vele együtt ezt a használati

utasítást/biztonsági utasításokat is. Nem

vállalunk felelőséget olyan balesetekért vagy

károkért, amelyek ennek az utasításnak és a

biztonsági utasításoknak a figyelmen kívül

hagyásából keletkeznek.

2. Biztonsági utasítások

 Nem szabad az ármafejlesztőn semmilyen

fajta változtatásokat elvégezni.

 Karbantartáshoz és tartozékként csak

originálrészeket szabad felhasználni.

 Figyelem: Mérgezés veszélye, kipufogó

gázok, üzemanyagok és kenőanyagok

mérgezőek, a kipufogó gázokat nem

szabad belélegezni.

 Gyerekeket távoltartani az áramfejlesztőtöl.

 Figyelem: Megégetés veszélye, ne érintse

meg a kipufogószerelvényt vagy a meghajtó

aggregátot.

 Ha a készülék közelében tartózkodik, akkor

használjon egy megfelelő hallásvédőt.

 Figyelem: Benzín és bezínpára könnyen

gyullékony ill. robbanékony.

 Ne üzemeltesse az áramfejlesztőt nem

szellőztetett termekben vagy egy könnyen

gyullékony környezetben. Ha az

áramfejlesztő jól szellőztetett termekben

lesz üzemeltetve, akkor a kipufogó gázokat

egy kipufogógáztömlőn keresztül direkt a

szabadba kell kivezetni. Figyelem: Egy

kipufogógáztömlő használatánál is el

tudnak távozni mérgező gázok. Tűzveszély

miatt nem szabad sohasem gyullékony

anyagokra irányítani a kipufogógáztömlőt.

 Robbanásveszély! Ne üzemeltese az

áramfejlesztőt sohasem gyullékony

anyagokat tartalmazó termekben.

 A gyártó által előre beállított fordulatszámot

nem szabad megváltoztatni. Megsérülhet az

áramfejlesztő vagy a csatlakoztatott

készülékek.

 A szállítás ideje alatt biztosítani kell az

áramfejlesztőt elcsúszás vagy billenés

ellen.

 Az áramfejlesztőt a falaktól vagy a

csatlakoztatott készülékektől legalább 1

méteres távolságra kell felállítani.

 Az áramfejlesztőt egy biztos, sík helyre

tenni. Tilos az üzemeltetés ideje allati

elfordítás és döntés vagy a telephely

megváltoztatása.

 Szállításnál és feltankolásnál a motort

mindig lekapcsolni.

 Ügyeljen arra, hogy a feltankolásnál ne

loccsantson ki üzemanyagot a motorra vagy

a kipufogóra.

 Ne üzemeltese az áramfejlesztőt sohasem

esőben vagy havazásban.

 Ne nyúljon sohasem nedves kézzel az

áramfejlesztőhöz.

 Óvja magát az elektromos veszélyek elöl.

 A szabadban csakis arra engedélyezett és

megfelelően megjelölt hosszabbítókábelt

használni (H07RN.).

 Hosszabbító kábelek használatánál nem

szabad azok teljes hosszának 1,5mm²-nél

50 m-t, 2,5mm²-nél 100 m-t túllépniük.

 Nem szabad a motor- és a

generátorbeállításokon változtatásokat

elvégezni.

 Javítási és beállítási munkálatokat csak

felhatalmazott szakszemélyzetnek szabad

elvégeznie.

 A tartályt ne töltse fel ill. ürítse ki nyílt fény,

tűz vagy szikrahullás közelében. Ne

dohányozzon!

 Ne érintse meg a mechanikusan mozgatott

vagy forró részeket. Né távolítsa el a

védőburkolatokat.

 Nem szabad a készülékeket nedvességnek

vagy pornak kitenni. Az engedélyezett

környezeti hőmérséklet –10-től +40°-ig,

magasság: 1000 m az NN fölött, rel.

légnedvesség: 90% (nem kondenzálódó).

 Az áramfejlesztő egy belső égésű motor

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 19

20

HU

által van meghajtva, amely a kipufogócső

terén (a dugaszoló aljzattal szemben levő

oldalon) és a kipufogó kiáramlásánál

hőséget hoz létre. Kerülje ezeknek a

felületeknek a közelségét a bőr

megégetésének veszélye miatt.

 A technikai adatoknál a

hangteljesítménymérték (LWA) és a

hangnyomásmérték (LpA) alatt megadott

értékek, emissziós szintet jelentenek és

nem okvetlenül biztos munkahelyi szintet.

Mivel az emissziós- és imisszió szint között

egy összefüggés áll fenn, ezért ezt nem

lehet megbízhatóan az esetleg szükséges

kiegészítő óvóintézkedések

meghatorázására felhasználni. A munkaerő

aktuális imisszió szintjét befolyásoló

tényezők magukba foglalják a munkaterem

tulajdonságát, más zajforrásokat, stb. mint

például a gépek számát és más

szomszédos lefolyásokat valamint az

időtartamot, amig a kezelő zajnak van

kitéve. Ugyszintén eltérhet országról

országra az engedélyezett imisszió szint.

Mégis ez az információ megadja a gép

használójának a lehetőséget a rizikó és a

veszélyeztetés felbecsülésének az

elvégzésére.

Figyelem: Üzemanyagként kizárólag csak

ólommentes normál-benzínt használni.

 FIGYELMEZTETÉS

Olvasson minden biztonsági utalást és

utasítást el. A biztonsági utalások és

utasítások betartásán belüli mulasztások

következménye áramcsapás, tűz és/vagy

nehéz sérülések lehetnek.

Őrizze meg a biztonsági utalásokat és

utasításokat a jövőre nézve.

A készüléken található jelzőtáblák

magyarázata (15-ös kép)

1. Figyelem! Elolvasni a használati utasítást.

2. Figyelem! Forró részek. Távolságot tartani.

3. Figyelem! A tankolás ideje alatt leállítani a

motort.

4. Figyelem! Ne üzemeltesse nem

szellőztetett termekben.

3. A készülék leírása

(ábrák 1-től – 5-ig)

1 Tank kijelző

2 Tanksapka

3 2 x 230 V ~ dugaszoló aljzat

4 Földelőcsatlakozás

5 Túlterhelés elleni védelem

6 Voltméter

7 Olajbetöltőcsavar

8 Olajleengedőcsavar

9 Olajhiánybiztosítás

10 Be-/kikapcsoló

11 Hidegindítókar

12 Reverzálóindítóberendezés

13 Benzíncsap

14 Kerekek

15 Keréktengely

16 Állóláb

17 Tolófültartó

18 Tolófül

19 Csavarok M8x40

20 Csavarok M8x16

21 Alátétkorongok a kerekekhez

22 Biztosítósasszegek a kerekekhez

23 Anyák M8

24 Csavarhajtó

25 Gyújtógyertyakulcs

26 Olajbetöltőtölcsér

Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 20

Stránka sa načítava...

Parkside PSE 2800 A1 Operation and Safety Notes

Parkside PSE 2800 A1 Operation and Safety Notes

v iných jazykoch

Súvisiace články

Ostatné dokumenty