Silvercrest SPB 2.600 C1 User Manual And Service Information

V1.31

English .................................................................. 2

Magyar .............................................................. 18

Čeština ............................................................... 34

Slovensky .......................................................... 50

Deutsch .............................................................. 66

SilverCrest SPB 2.600 C1

2 - English

Table of Contents

Introduction .......................................................... 3

Intended use ........................................................ 3

Package contents ................................................. 4

Technical specifications ......................................... 4

Safety instructions ................................................ 5

Overview of the operating controls .................... 10

Before you start ................................................. 10

Getting started ................................................... 11

Charging the power bank ..................................................... 11

Checking the state of charge ................................................ 12

Charging external devices..................................................... 12

Storage when not in use ........................................................ 13

Troubleshooting ................................................. 14



Environmental regulations and disposal

information ........................................................ 14



Conformity notes ................................................ 15

Warranty and Service Information ..................... 16



SilverCrest SPB 2.600 C1

English - 3

Introduction

Thank you for choosing a SilverCrest product. The SilverCrest

Power Bank SPB 2.600 C1 allows you to recharge the empty

battery of e.g. a mobile phone while on the move, even if there

is no power socket available.

Intended use

The SilverCrest Power Bank SPB 2.600 C1 is an information

technology product. It allows you to recharge mobile devices

that have a USB charging socket. The SilverCrest Power Bank

has not been designed for corporate or commercial

applications. Use the power bank for private use only. Any use

other than that mentioned above does not correspond to the

intended use. This power bank fulfils all relevant standards and

directives. Any modifications to the power bank other than

recommended changes by the manufacturer may result in these

standards no longer being met. The manufacturer shall not be

liable for any damage or malfunctions resulting therefrom.

Observe the regulations and laws in the country of use.

SilverCrest SPB 2.600 C1

4 - English

Package contents

A Power Bank SPB 2.600 C1

(the design is an example only)

B USB charger cable

C These operating instructions (line-art illustration)

Technical specifications

Built-in battery pack 3,7V / 2600mAh

Input voltage/current 5 V , 1 A

Output voltage/current 5 V , 1 A

Minimum load current

consumption approx. 60 mA

Dimensions (W x H x D) approx. 2.3 x 2.3 x 10.3 cm

Weight (without charger

cable) approx. 72 g

Operating temperature 5 °C to 45 °C

Operating humidity max. 85 % rel. humidity

(non-condensing)

Permissible storage

conditions

-5 °C to +50 °C,

max. 85 % rel. humidity

(non-condensing)

The technical specifications and design can be changed

without prior notice.

SilverCrest SPB 2.600 C1

English - 5

Safety instructions

Before you use the power bank for the first time, please

carefully read the following instructions even if you are familiar

with handling electronic devices. Keep these operating

instructions in a safe place for future reference. If you sell the

power bank or pass it on, it is essential that you also hand over

this manual, as it is part of the product.

Explanation of used symbols

DANGER! This symbol and the word "Danger"

denote a potentially dangerous situation. Ignoring

it can lead to severe injury or even death.

WARNING! This symbol and the word

“Warning” denote important information required

for the safe operation of the product and for the

safety of its users.

1. Because of its high input current, never use a

notebook or PC to charge the power bank, only

use a suitable power adapter (5 V , min.1A;

not supplied).

2. The power bank must never be charged and be

used to recharge an external device at the same

time.

This symbol denotes further information on the

topic.

SilverCrest SPB 2.600 C1

6 - English

Operating environment

The device is not designed for use in environments with high

humidity (e.g. bathrooms) or excessive levels of dust.

Operating temperature and operating humidity: +5 to +45 °C,

max. 85 % relative humidity. Please note that when using the

product in a car, especially behind the windscreen, the

temperature can significantly increase above +45 °C.

DANGER! Always make sure that

 the device is not exposed to direct heat sources (e.g.

radiators.)

 the device is not exposed to strong artificial light.

 contact with water spray and drops and aggressive fluids is

avoided and the device is never operated near water, the

device is never submerged (do not place any items

containing liquids, such as drinks, vases, etc. on or near the

device).

 the device is never placed near magnetic fields (e.g.

speakers).

 no naked flames (e.g. burning candles) are placed on or

near the device.

 no foreign bodies can penetrate into the device.

 the device is not subjected to any major temperature

fluctuations as this can cause condensation and short-

circuiting. If the device has been exposed to strong

SilverCrest SPB 2.600 C1

English - 7

temperature fluctuations, wait for it to reach the ambient

temperature before switching it on (about 2 hours).

 the device should not be subjected to excessive shocks and

vibrations.

 the device or the optional USB power adapter is not used

during thunderstorms and unplug the optional USB power

adapter from the mains.

 when using a USB power adapter the power socket used

must be easily accessible at all times and cables are laid so

they do not present a trip hazard.

 the device is not covered. Heat can accumulate when the

device is covered, therefore there is a risk of fire.

Failure to heed the warnings above may result in damage to

the device or injury.

DANGER! – danger of explosion

Never throw the device into a fire and do not deform the

device or the built-in battery, as this could cause the battery to

explode.

Please note the usage restrictions and regulations relating to

battery-powered devices in dangerous places, such as petrol

stations, aircraft, hospitals, etc.

SilverCrest SPB 2.600 C1

8 - English

DANGER! Children and persons

with disabilities

Electrical devices are not suitable for children. People with

disabilities should only use electrical devices in appropriate

circumstances. Do not allow children or persons with disabilities

to use electrical devices unsupervised. They may not

comprehend the potential risks. Batteries and small parts

represent potential choking hazards.

Keep the packaging away from children and

persons with disabilities.

There is a risk of suffocation.

WARNING! Cables

Always hold cables by the plug and never pull on the cable

itself. Never place heavy objects or furniture on the cables and

take care that the cord does not become trapped, especially at

the plug and sockets. Never tie knots in a cable and do not tie

them to other cables. All cables must be laid so that nobody

can trip over them or be obstructed by them.

SilverCrest SPB 2.600 C1

English - 9

DANGER!

Maintenance / cleaning

Repairs are required if this device has been damaged in any

way, for example if the device housing is damaged, if liquids or

objects have penetrated the device or if the product has been

exposed to rain or moisture. Repairs are also necessary if the

product is not working properly or has been dropped. If you

notice any smoke, unusual noises or strange smells, unplug all

cables immediately and disconnect the optional USB power

adapter from the power supply. If this occurs, do not continue

to use the device and have it checked out by an expert. All

repairs must be carried out by qualified service personnel.

Never open the housing of the device. Only use a clean, dry

cloth for cleaning. Never use aggressive liquids. Do not attempt

to open the housing of the device, this will void your warranty.

Copyright

All the contents of this user manual are protected by copyright

and provided to the reader for information only. Copying data

and information without the prior explicit written consent of the

author is strictly forbidden. This also applies to any commercial

use of the contents and information. All texts and diagrams are

up-to-date as of the date of printing.

SilverCrest SPB 2.600 C1

10 - English

Overview of the operating controls

An illustration of the operating controls and their corresponding

numbers can be found on the inside page of the fold-out cover

of this user manual.

1 State of charge /

START pushbutton

2-5 LED (charging state)

6 USB socket (output):

Here you connect the

device to be

charged.

7 Micro USB port:

Charging socket

(input)

Before you start

Remove the power bank and its accessories from the package

and remove the plastic films.

SilverCrest SPB 2.600 C1

English - 11

Getting started

The power bank must never be charged and be

used to recharge an external device at the same

time.

Charging the power bank

Because of its high input current, never use a

notebook or PC to charge the power bank, only use

a suitable power adapter (5 V , min.1A).

To charge the built-in battery of your power bank, use the

supplied USB charging cable (B) to connect the power bank to

a suitable USB power adapter (not supplied). To do so, insert

the Micro USB plug of the USB charging cable (B) into the

power bank Micro USB socket (7) and then connect the USB

plug to the USB port of the power adapter. During the

charging process, the LEDs (2, 3, 4, 5) inform you about the

current state of charge of the power bank.

LED indicator State of charge

One LED flashes 0 - 24%

One LED flashes, one LED on 25 - 49%

One LED flashes, two LEDs on 50 - 74%

One LED flashes, three LEDs on 75 - 99%

All LEDs on 100%

SilverCrest SPB 2.600 C1

12 - English

Alternatively, you can charge the power bank

battery with the USB power adapter of your mobile

device if its output meets the following

specifications:

5V , min. 1A

Checking the state of charge

You can also check the state of charge of your power bank

when it is not being charged or discharged. To do this, press

the State of charge / START pushbutton (1) briefly. The LEDs

(2, 3, 4, 5) will indicate the state of charge of the power bank

for approx. 35 seconds.

LED indicator State of charge

All LEDs on 75-100%

Three LEDs on 50 - 74%

Two LEDs on 25 - 49%

One LED on 1 - 24%

All LEDs off 0%

Please note that the LED display gives only an approximate

value of the actual charge level of the Power Bank.

Charging external devices

 To charge an external device with your power bank, use the

supplied USB charging cable (B) to connect the power bank

to the external device. To do so, insert the Micro USB plug of

the USB charging cable (B) into the Micro USB socket of

your external device and then connect the USB plug into the

SilverCrest SPB 2.600 C1

English - 13

USB port (6) of your power bank. If the charging process

doesn’t start automatically, press the State of charge /

START pushbutton (1) briefly to start the charging process.

Alternatively you can also use the charging cable of the

external device manufacturer (USB connection).

During the charging process, the LEDs (2, 3, 4, 5) inform you

about the current state of charge of the power bank.

 You can stop the charging process at any time by

unplugging the USB charging cable (B) or by pressing twice

or keeping pressed (for approx. 10 seconds) the State of

charge / START pushbutton (1).

Storage when not in use

When not using the power bank for a long time, it is

recommended to recharge it from time to time. This

ensures a longer battery endurance.

Store the device in a dry, cool place.

SilverCrest SPB 2.600 C1

14 - English

Troubleshooting

The power bank is not charging

 Faulty connection, double-check the connection.

 The USB power adapter you are using is defective. Use a

different power adapter that you are certain is working.

 Check whether the used power socket is alive.

A connected device is not charging.

 The battery of your power bank is empty; recharge it.

 No connection to the external device, double-check the

connection.

 Press the State of charge / START pushbutton (1) briefly to

start the charging process.

 The current consumption of the connected device is too low

(< approx. 60 mA). It is not possible to charge it with the

power bank. Please check the technical specifications of the

connected device.

Environmental regulations and disposal

information

Devices marked with this symbol are subject to

the European Directive 2012/19/EU. All

electrical and electronic devices must be

disposed of separately from household waste

at official disposal centres. Proper disposal of

SilverCrest SPB 2.600 C1

English - 15

old devices prevents damage to the environment or your

health. For further information about proper disposal, contact

your local council, recycling centre or the shop where you

bought the device.

The built-in rechargeable battery cannot be

removed for disposal.

Dispose of all packaging in an environmentally friendly

manner. Cardboard packaging can be taken to paper

recycling centres or public collection points for recycling. Any

film or plastic contained in the packaging should be taken to

your public collection points for disposal.

Conformity notes

This device complies with the basic and other

relevant requirements of EMC Directive

2014/30/EU and the RoHs Directive

2011/65/EU. In order to receive the complete EU declaration

of conformity, please send an e-mail to the following e-mail

address: [email protected]

SilverCrest SPB 2.600 C1

16 - English

Warranty and Service Information

Warranty of TARGA GmbH

This device is sold with three years warranty from the date of

purchase. Please keep the original receipt in a safe place as

proof of purchase. Before using your product for the first time,

please read the enclosed documentation. Should any problems

arise which cannot be solved in this way, please call our

hotline. Please have the article number and, if available, the

serial number to hand for all enquiries. If it is not possible to

solve the problem on the phone, our hotline support staff will

initiate further servicing procedures depending on the fault.

Within the warranty period the product will be repaired or

replaced free of charge as we deem appropriate. No new

warranty period commences if the product is repaired or

replaced. Consumables such as batteries, rechargeable

batteries and lamps are not covered by the warranty.

Your statutory rights towards the seller are not affected or

restricted by this warranty.

SilverCrest SPB 2.600 C1

English - 17

Service

Phone: 020 – 49 04 03

E-Mail: [email protected]

Phone: 01 - 43121

E-Mail: [email protected]

Phone: 027 78 11 03

E-Mail: [email protected]

Phone: 02 – 20 09 025

E-Mail: [email protected]

IAN: 275474

Manufacturer

TARGA GmbH

Coesterweg 45

59494 SOEST

GERMANY

SilverCrest SPB 2.600 C1

18 - Magyar

Tartalomjegyzék

Bevezetés ........................................................... 19

Rendeltetésszerű használat ................................ 19

A csomag tartalma ............................................. 20

Műszaki adatok ................................................. 20

Biztonsági utasítások ......................................... 21

A kezelőszervek áttekintése .............................. 26

Mielőtt belekezdene ........................................... 26

Bevezetés a készülék használatába ................... 27

Az energiatároló töltése ........................................................ 27

A töltési állapot ellenőrzése .................................................. 28

Külső eszközök töltése ........................................................... 28

Tárolás használaton kívül ...................................................... 29

Hibaelhárítás ..................................................... 29



Környezetvédelmi szabályok és

hulladékkezelési információk ............................ 30



Megfelelőségi nyilatkozat .................................. 31

Garanciális és szerviz tájékoztatás .................... 32



Stránka sa načítava ...

Silvercrest SPB 2.600 C1 User Manual And Service Information

Silvercrest SPB 2.600 C1 User Manual And Service Information

V iných jazykoch

Súvisiace články

Ďalšie dokumenty