Silvercrest SPB 2600 C2 Operating Instructions Manual

POWER BANK SPB 2600 C2

IAN 279396

POWERBANK

Bedienungsanleitung

POWERBANK

Návod k obsluze

POWER BANK

Operating instructions

MOBILNA BATERIJA

POWERBANK

Navodila za uporabo

TÖLTŐ

Használati utasítás

MOBILNÁ NABÍJAČKA

Návod na obsluhu

GB Operating instructions Page 1

HU Használati utasítás Oldal 23

SI Navodila za uporabo Stran 45

CZ Návod k obsluze Strana 65

SK Návod na obsluhu Strana 87

DE / AT / CH Bedienungsanleitung Seite 109

Before reading, unfold the page containing the illustra-

tions and familiarise yourself with all functions of the

device.

Olvasás előtt kattintson az ábrát tartalmazó oldalra

és végezetül ismerje meg a készülék mindegyik

funkcióját.

Pred branjem odprite stran s slikami in se nato

seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se

seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom

sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbil-

dungen aus und machen Sie sich anschließend mit

allen Funktionen des Gerätes vertraut.

SPB 2600 C2

GB

│

1 ■

Contents

Introduction ........................3

Information concerning these operating

instructions .............................. 3

Copyright ............................... 3

Notes on trademarks ...................... 4

Intended use ............................. 4

Warnings used ........................... 5

Safety ............................6

Basic safety guidelines ..................... 6

Descriptions of components ...........9

Start-up ..........................10

Check scope of delivery ...................10

Disposal of packaging materials ............10

Charging the Power Bank ..................11

Checking the charge level .................12

Handling and operation .............13

Charging mobile devices with the Power Bank . 13

Troubleshooting ...................14

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . .16

Storage when not in use ............16

SPB 2600 C2

■ 2

│

GB

Disposal ..........................17

Disposal of the appliance. . . . . . . . . . . . . . . . . . 17

Appendix .........................18

Technical data ..........................18

Notes on the EU Declaration of Conformity ....18

Kompernass Handels GmbH warranty .......19

Service ................................22

Importer ...............................22

SPB 2600 C2

GB

│

3 ■

Introduction

Information concerning these operating

instructions

Congratulations on the purchase of your new appli-

ance. You have selected a high-quality product.

The operating instructions are part of this product.

They contain important information on safety, usage

and disposal. Before using the product, familiarise

yourself with all handling and safety guidelines. Use

the product only as described and for the range of

applications speciﬁed. Keep these operating instruc-

tions in a safe place. Please also pass these operating

instructions on to any future owner.

Copyright

This documentation is protected by copyright.

Any copying or reproduction, including in the form

of extracts, or any reproduction of images (even in

a modiﬁed state), is permitted only with the written

authorisation of the manufacturer.

SPB 2600 C2

■ 4

│

GB

Notes on trademarks

USB

®

is a registered trademark of USB Implementers

Forum, Inc.

All other names and products may be trademarks or

registered trademarks of their respective owners.

Intended use

This device is an information technology device and

is intended exclusively for charging mobile devices

that are charged via a USB port as standard.

The appliance is not intended for any other purpose,

nor for use beyond the scope described. This device

is not intended for use in commercial or industrial

environments. The manufacturer accepts no responsi-

bility for damage caused by failure to observe these

instructions, improper use or repairs, unauthorised

modiﬁcations or the use of unapproved replacement

parts. The risk shall be borne solely by the user.

SPB 2600 C2

GB

│

5 ■

Warnings used

The following warning notice types are used in these

operating instructions:

DANGER

A warning notice at this hazard level

indicates an imminently hazardous

situation.

Failure to avoid this hazardous situation could

result in severe injuries or even death.

► Follow the instructions in this warning notice to

avoid the risk of serious injuries or death.

CAUTION

A warning notice at this hazard level in-

dicates a potential for property damage.

Failure to avoid this situation could result in property

damage.

► Follow the instructions in this warning notice to

prevent property damage.

NOTE

► A note provides additional information that will

assist you in using the appliance.

SPB 2600 C2

■ 6

│

GB

Safety

In this section, you will ﬁnd important safety instruc-

tions for using the appliance. This appliance com-

plies with statutory safety regulations. Improper use

may result in personal injury and property damage.

Basic safety guidelines

■ This device may be used by children aged 8 years

and above and by persons with limited physical,

sensory or mental capabilities or lack of experience

and knowledge, provided that they are under super-

vision or have been told how to use the device

safely and are aware of the potential risks. Chil-

dren must not play with the appliance. Cleaning

and user maintenance tasks may not be carried

out by children unless they are supervised.

■ Check the appliance for visible external damage

before use. Do not operate an appliance that has

been damaged or dropped.

■ Always place the device on a stable and level

surface. It can be damaged if dropped.

■ Do not expose the device to direct sunlight or

high temperatures. Otherwise it may overheat

and be irreparably damaged.

■ Do not place the product near heat sources such

as radiators or other heat-generating devices.

SPB 2600 C2

GB

│

7 ■

■ Keep the appliance away from open ﬂames

(e.g. candles) at all times.

■ The device is not designed for use in rooms with

high temperatures or humidity (e.g. bathrooms)

or where there is excessive dust.

■ Never expose the device to extreme heat. This

particularly applies to storage in a car. Extreme

temperatures can occur in car interiors and glove

compartments during long periods of immobilisa-

tion. Remove electrical and electronic devices

from the vehicle.

■ Do not use the device immediately after moving it

from a cold room to a warm room. Always allow

the device to acclimatise before switching it on.

■ Never open the housing of the appliance.

There are no user-serviceable or replaceable

components inside the device.

■ Do not make any unauthorised modiﬁcations or

alterations to the device.

■ All repairs must be carried out by authorised

specialist companies or by the Customer Service

department. Failure to make proper repairs may

put the user at risk. It will also invalidate any war-

ranty claims.

SPB 2600 C2

■ 8

│

GB

■ Do not expose the device to water spray or drip-

ping water, and do not place liquid-ﬁlled objects

such as vases or open drink containers on or near

the device.

■ Switch the device oﬀ immediately and disconnect

any connected charging cables from the device

if you smell fumes or notice any smoke. Have the

device checked by a qualiﬁed specialist before

using it again.

■ If you are using a USB power supply, the mains

socket used must always be easily accessible so

that the USB power supply can be quickly discon-

nected from the socket in a hazardous situation.

You should also observe the operating instructions

for the USB power supply.

■

DANGER! Mishandling the batteries can cause

ﬁres, explosions, leakages or other hazards!

Do not throw the device into a ﬁre, since the inte-

grated battery may explode.

■ Pay attention to any usage restrictions or prohibi-

tions for battery-powered appliances in locations

with speciﬁc hazard risks, such as petrol stations,

aircraft, hospitals etc.

■

DANGER! Do not allow children to play with

the packaging material! Keep all packaging

materials out of the reach of children.

Risk of suﬀocation!

SPB 2600 C2

GB

│

9 ■

Descriptions of components

(See fold-out page for illustrations)

Power Bank SPB 2600 C2

microUSB charging port (input)

USB port (output)

ON/OFF button

Charge level LEDs

Charging cable (USB to microUSB)

Operating instructions (Symbol image)

SPB 2600 C2

■ 10

│

GB

Start-up

Check scope of delivery

(See fold-out page for illustrations)

The scope of delivery includes the following

components:

▯ Power Bank SPB 2600 C2

▯ Charging cable

▯ These operating instructions

♦ Remove all parts of the device from the packaging

and remove all packaging materials.

NOTE

► Check the package for completeness and for

signs of visible damage.

► If the delivery is incomplete or damage has

occurred as a result of defective packaging or

during transport, contact the Service hotline

(see chapter entitled Service).

Disposal of packaging materials

The packaging protects the device from

damage during transport. The packaging

materials have been selected for their

environmental friendliness and ease of

disposal, and are therefore recyclable.

SPB 2600 C2

GB

│

11 ■

Returning the packaging into the material cycle con-

serves raw materials and reduces the amount of

waste generated. Dispose of packaging materials

that are no longer needed in accordance with

applicable local regulations.

Charging the Power Bank

Before using the Power Bank, the integrated battery

must be fully charged.

CAUTION

► The Power Bank must never be charged and

used for charging an external device at the

same time.

► Only use mains adapters with an output voltage

of 5V and an output current of at least 1A or

a USB 3.0 port on your computer to charge the

Power Bank. You can recognise the USB 3.0

port due to the blue marking.

► When charging via a USB port, ensure that at

least one further USB port remains free. This

also applies when using USB 3.0 ports.

► Not all USB 2.0 ports deliver suﬃcient power to

charge the Power Bank. If this is the case, use an

external power supply or a USB 3.0 port.

SPB 2600 C2

■ 12

│

GB

♦ Connect the USB plug of the charger cable

to a switched-on PC or a USB power supply

(not supplied).

♦ Connect the microUSB plug of the charging cable

to the microUSB charging port on the

Power Bank. An estimate of the charge level is

shown by means of the charge level LEDs .

LED display Charge level

One LED is ﬂashing < 20%

One LED is on, the second LED

is ﬂashing

20–49%

Two LEDs are on, the third LED

is ﬂashing

50–74%

Three LEDs are on, the fourth LED

is ﬂashing

75–97%

All LEDs are on 98–100%

Checking the charge level

You can also check the charge level of the Power

bank when it is not charged or is being used for

charging.

♦ Press the ON/OFF button

brieﬂy. The LEDs

show the current charge level of the Power bank

for about 30 seconds.

SPB 2600 C2

GB

│

13 ■

LED display Charge level

All LEDs are on 98–100%

Three LEDs are on 75–97%

Two LEDs are on 50–74%

One LED is on 20–49%

One LED is ﬂashing < 20%

All LEDs are oﬀ 0%

Handling and operation

Charging mobile devices with the

Power Bank

♦ Insert the microUSB plug of the charging cable

into the microUSB charging port of the mobile

device, and insert the USB plug into the USB port

on the Power Bank. The charging process

starts automatically.

♦ If charging does not start automatically, press the

ON/OFF button

brieﬂy to start the charging

process.

SPB 2600 C2

■ 14

│

GB

NOTE

► Alternatively, you can also use the original

charging cable (USB cable) provided by the

respective device manufacturer.

♦ During the charging process, the current charge

level of the Power Bank is shown via the charge

level LEDs

(see table in chapter entitled

“Charging the Power Bank”).

♦ To end the charging procedure, disconnect the

charging cable

from the mobile device and

the Power Bank. The charging status LEDs go

oﬀ after about 30 seconds.

Troubleshooting

The Power Bank does not charge

♦ Connection may be faulty. Check the connection.

♦ Some computers deactivate the power supply to

the USB ports when they are switched oﬀ. Check

that the computer is switched on.

A connected device will not charge

♦ The integrated battery is empty. Charge the battery.

♦ No connection to the device. Check the connection.

♦ Press the ON/OFF button

to start the charging

process.

SPB 2600 C2

GB

│

15 ■

♦ The charging current of the connected device is

too low (< 80 mA) or too high (> 1 A).

♦ The internal overcurrent protection may have

been triggered. Disconnect the attached device

and connect the microUSB charging port

to

a power source for a short while (see section

Charging the Power Bank). Afterwards, the

Power Bank can be used again.

NOTE

► If you cannot solve the problem with the above-

mentioned solutions, please contact the Service

Hotline (see chapter entitled Service).

SPB 2600 C2

■ 16

│

GB

Cleaning

CAUTION

Possible damage to the appliance.

There are no serviceable parts or parts requiring

cleaning inside the Power Bank. Moisture can

cause damage to the appliance.

► To avoid irreparable damage to the appliance,

ensure that no moisture can penetrate the

device during cleaning.

► Do not use caustic, abrasive or solvent-based

cleaning materials. These can damage the

surfaces of the device.

♦ Clean the housing of the device with a lightly

moistened cloth and a mild detergent only.

Storage when not in use

♦ Store the device in a location which is clean,

dry, dust-free and not in direct sunlight.

♦ For long-term storage, the integrated battery should

be fully charged to extend its operating life.

SPB 2600 C2

GB

│

17 ■

Disposal

Disposal of the appliance

The adjacent symbol of a crossed-out

wheelie bin means that this device is

subject to Directive 2012/19/EU. This

directive states that this device may not

be disposed of in normal household waste at the end

of its useful life, but must be brought to a specially

set-up collection point, recycling depot or disposal

company.

This disposal is free of charge for the user.

Protect the environment and dispose of

this device properly.

You can obtain further information from your local

disposal company or the city or local authority.

Stránka sa načítava...

Silvercrest SPB 2600 C2 Operating Instructions Manual

Súvisiace články

Ostatné dokumenty