Panasonic SCUA30E Návod na používanie

Značka: Panasonic

Model: SCUA30E

Typ: Návod na používanie

Táto príručka je tiež vhodná pre

SCUA30

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

TQBJ2152

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Wireless Speaker System

Zestaw głośników bezprzewodowych

Bezdrátová souprava reproduktorů

Model No. SC-UA30

Děkujeme za zakoupení tohoto výrobku.

Pro dosažení optimálního výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Uschovejte si prosím tento návod k obsluze.

Dziękujemy za zakupienie tego produktu.

Proszę dokładnie zapoznać się z tą instrukcją obsługi, aby jak najlepiej wykorzystać to urządzenie i zapewnić jego

bezpieczne użytkowanie.

Prosimy o zachowanie niniejszej instrukcji obsługi.

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

SC-UA30 E TQBJ2152 En.fm Page 1 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Your system and the illustrations can look differently.

The symbols on this product (including the accessories)

represent the following:

Table of contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Caution for AC mains lead . . . . . . . . . . . . . . . . . . . . . . . 3

Sales and Support Information . . . . . . . . . . . . . . . . . . . . 3

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Transporting the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the remote control . . . . . . . . . . . . . . . . . . . . . 4

Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . 5

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preparing media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Media playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Jukebox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using a microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Karaoke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

External equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as lighted

candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and

excessive vibration.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

Class II equipment (The construction of the

product is double-insulated.)

Standby

SC-UA30 E TQBJ2152 En.fm Page 2 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Caution for AC mains lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that

the replacement fuse has a rating of 5-ampere and that it

is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the

body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your

local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Sales and Support Information

For the United Kingdom and Ireland

Customer Communications Centre

• For customers within the UK: 0344 844 3899

• For customers within Ireland: 01 289 8333

• Monday – Friday 9:00am – 5:00pm (Excluding public

holidays).

• For further support on your product, please visit our

website: www.panasonic.co.uk

Direct Sales at Panasonic UK

• Order accessory and consumable items for your product

with ease and confidence by phoning our Customer

Communications Centre Monday – Friday 9:00am –

5:00pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering

application at www.pas-europe.com

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are

provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for

a wide range of finished products. Take a browse on our

website for further details.

Supplied accessories

Check and identify the supplied accessories. Product

numbers correct as of August 2018. These may be

subject to change.

 2 AC mains leads

For the United Kingdom and Ireland

(K2CT2YY00089)

 1 Ferrite core

(J0KG00000037)

 1 FM indoor antenna

(RSAX0002)

 1 Remote control

(N2QAYB001215)

 1 Remote control battery

 For the United Kingdom and Ireland

1 Antenna plug adaptor

(K1YZ02000013)

Note:

Use the AC mains lead that is suitable for your household

mains socket.

Figure A Figure B

Fuse cover

Fuse (5 ampere)

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 3 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Transporting the unit

Preparation

Disconnect all connected devices and cables from the

unit.

Note:

• Keep the unit at least 10 mm away from other objects for

proper ventilation.

• The speakers do not have magnetic shielding. Do not put

them near PCs or other equipment easily influenced by

magnetism.

• When you play at high levels for a long period, it can cause

damage to the speakers and decrease the life of the

speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

Maintenance

Disconnect the AC mains lead before maintenance.

Clean this system with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

CAUTION!

• Improper handling or transportation manner may

cause the unit to fall, etc., resulting in damage

and/or personal injury.

• Do not touch the speaker cone’s reverberating

surfaces:

– This may damage the speaker cone.

– The speaker cone may be hot.

• Do not put the unit on a table or any elevated

surface.

• Do not allow children to climb on the unit.

• Be careful when babies or children are near.

SC-UA30 E TQBJ2152 En.fm Page 4 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1 Connect the FM indoor antenna.

Put the antenna where reception is best.

2 Connect the AC mains lead.

Do not use any other AC mains leads except the

supplied one.

Hold the unit when connecting or disconnecting the

AC mains lead to prevent the unit from falling.

Conserving power

The system consumes a small amount of power even

when it is in standby mode. Disconnect the power

supply if you do not use the system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Note:

Keep the antennas away from the AC mains lead to avoid

picking up noise.

For the United Kingdom and Ireland

Connect the FM outdoor antenna.

Use an outdoor antenna if reception is poor.

CAUTION!

Keep the antenna plug adaptor out of reach of

children to prevent swallowing.

Note:

• Do not use the outdoor antenna during a lightning

storm.

• Disconnect the outdoor antenna if you do not use the

system.

Adhesive tape

(not supplied)

75 ȍ coaxial cable

(not supplied)

FM outdoor antenna

(not supplied)

Antenna plug adaptor

(For the AC mains plug of three pins)

READ THE “Caution for AC mains lead” BEFORE

CONNECTION.

CAUTION!

Keep the ferrite core out of reach of children to

prevent swallowing.

To household

mains socket

Attaching the ferrite core near to the terminal

A Pull on the tabs (both sides)

to open.

B Put the AC mains lead onto

one of the concave surfaces.

C Coil the AC mains lead

around the ferrite core and

onto the other concave

surface.

D Close the ferrite core until it

clicks.

Note:

Failure to attach the ferrite core to

the AC mains lead may cause

interference to other devices

nearby.

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 5 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.

A Standby/on switch [`], [1]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still consuming

a small amount of power.

B Decrease the brightness of the display panel

The illumination is also switched off.

To cancel, press the button again.

C Select the audio source

Press [SELECT <, >] (unit: [SELECT]) repeatedly to

select the source:

On the unit:

To start Bluetooth

pairing, press and hold [ ].

D Basic playback control

E View the setup menu

F View the content information

G Select or confirm the option

H Set the sleep timer

I Adjust the volume level

J Mute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

K View the play menu

L Select the sound effects

M Select the jukebox

N USB port ( )

O Display panel

P Remote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down,

30° left and right

USB

AUXBLUETOOTH

D-INFM

SC-UA30 E TQBJ2152 En.fm Page 6 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Preparing media

USB

Preparation

Before you connect a USB device to the system, make

sure you do a backup of the data.

1 Decrease the volume and connect the USB device

to the USB port.

2 Press [SELECT <, >] repeatedly to select “USB”.

Note:

• Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

• Some devices cannot be charged as the maximum USB

charging current is 0.5 A only.

Bluetooth

You can connect and play an audio device wirelessly

through Bluetooth

Preparation

• Switch on the unit.

• Switch on the Bluetooth

feature of the device and put

the device near the system.

• Read the operating instructions of the device for details.

█

Pairing a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~7).

1 Press [ ].

If “PAIRING” is shown, continue with step 3.

2 Press [PLAY MENU] to select “PAIRING” and then

press [OK].

3 Select “SC-UA30” from the Bluetooth

menu of the

device.

If prompted for a passkey, input “0000” or “1234”.

The device connects with this system automatically

after pairing is complete.

The MAC address (example: 6C:5A:B5:B3:1D:0F)

may be shown before “SC-UA30” is shown.

The name of the connected device is shown for a few

seconds.

Using the unit

1 Press and hold [ ] until “PAIRING” is shown.

2 Select “SC-UA30” from the Bluetooth

menu of the

device.

Note:

• You can pair up to 8 devices with this system. If a 9th device

is paired, the device that has not been used for the longest

time will be replaced.

• Depending on the searching functionality of the Bluetooth

device and the surrounding environment, if the product

name is not shown on the Bluetooth

menu of the device,

switch off and then switch on the Bluetooth

feature of the

device repeatedly during the pairing process.

█

Connecting a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~7).

1 Press [ ].

“BLUETOOTH READY” is shown.

2 Select “SC-UA30” from the Bluetooth

menu of the

device.

The name of the connected device is shown for a few

seconds.

3 Start playback on the device.

Note:

• A device must be paired to connect.

• This system can only connect to one device at a time.

• When “BLUETOOTH” is selected as the source, this system

will automatically try to connect to the last connected device.

(“LINKING” is shown during this process.)

█

Disconnecting a device

While a Bluetooth

device is connected

1 Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

2 Press [R, T] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the unit

Press and hold [ ] until “PAIRING” is shown.

Note:

A device is disconnected when you:

• Select a different source.

• Move the device out of the maximum range.

• Disable the Bluetooth

transmission of the device.

• Switch off the system or the device.

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 7 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Media playback

The following marks indicate the availability of the feature.

Basic playback

USB BLUETOOTH

Note:

Depending on the Bluetooth

device, some operations may not

work.

Viewing available information

USB BLUETOOTH

You can view the available information, such as MP3

album and track number, on the display panel.

Press [DISPLAY] repeatedly.

Example: MP3 album and track number display.

Note:

• Maximum characters that can be shown: Approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show

differently.

Play menu

USB

1 Press [PLAY MENU] repeatedly to select

“PLAYMODE”.

2 Press [R, T] to select the setting and then press

[OK].

Note:

• During random playback, you cannot skip to tracks which

have been played.

• The setting is cancelled when you disconnect the USB

device.

Link mode

BLUETOOTH

You can change the link mode to suit the connection type.

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (~7).

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [R, T] to select the mode and then press

[OK].

Note:

• When enjoying video contents with this function, the video

and audio output may not be synchronised. In this case,

select “MODE 1”.

• Select “MODE 1” if the sound is interrupted.

USB :

BLUETOOTH :

USB device with MP3 files.

Bluetooth

device.

Play Press [4/9].

Stop Press [8].

USB

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5/6] to skip track.

USB

Press [R, T] to skip MP3 album.

Search Press and hold [2/3] or [5/6].

Album

number

Track

number

OFF PLAYMODE Cancel the setting.

1-TRACK

Play one selected track.

Press [2/3] or [5/6] to

select the track.

1-ALBUM

Play one selected MP3 album.

Press [R, T] to select the MP3

album.

RANDOM

RND

Play all tracks randomly.

1-ALBUM

RANDOM

1 RND

Play all tracks in one selected MP3

album randomly.

Press [R, T] to select the MP3

album.

ALL REPEAT Repeat all tracks.

1-TRACK REPEAT

Repeat 1-TRACK.

1-ALBUM REPEAT

Repeat 1-ALBUM.

RANDOM REPEAT

RND

Repeat random playback.

1-ALBUM

RANDOM REPEAT

1 RND

Repeat 1-ALBUM RANDOM.

MODE 1 Emphasis on connectivity.

MODE 2 (default) Emphasis on sound quality.

SC-UA30 E TQBJ2152 En.fm Page 8 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

█

Note on USB device

• This system does not guarantee connection with all

USB devices.

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█

Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension “.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Radio

Preparation

Press [SELECT <, >] repeatedly to select “FM”.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [R, T] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

Memory presetting

You can preset up to 30 FM stations.

█

Automatic presetting

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [R, T] to select “LOWEST” or “CURRENT”

and then press [OK].

The tuner presets all the stations it can receive into the

channels in ascending order.

To cancel, press [8].

█

Manual presetting

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [R, T] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

█

Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8] on the unit to select “PRESET”. Continue

with step 3.

2 Press [R, T] to select “PRESET” and then press

[OK].

3 Press [2/3] or [5/6] to select the preset

station.

RDS broadcasting

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.

Press [DISPLAY] repeatedly.

Note:

RDS may not be available if reception is poor.

LOWEST Tuning begins from the lowest

frequency.

CURRENT Tuning begins from the current

frequency.

PS Programme service

PTY Programme type

FREQ Frequency

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 9 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Sound effects

Preset EQ

1 Press [SOUND] to select “PRESET EQ”.

2 Press [R, T] to select the setting and then press

[OK].

Preset EQ setting: “ROCK”, “POP”, “AFRO BEAT”,

“ARABIC”, “PERSIAN”, “INDIA BASS”, “DANGDUT”,

“MALAY POP”, “ELECTRONICA”, “REGGAETON”,

“SALSA”, “SAMBA”, “KARAOKE” or “FLAT”.

Manual EQ

1 Press [SOUND] repeatedly to select

“MANUAL EQ”.

2 Press [R, T] to select the sound effect.

3 Press [2/3] or [5/6] to select the setting

and then press [OK].

D.Bass

1 Press [SOUND] repeatedly to select “D.BASS” and

then press [R, T] to select “D.BASS LEVEL” or

“D.BASS BEAT”.

To cancel, select “OFF D.BASS”.

2 Press [2/3] or [5/6] on the remote

control to select the setting and then press [OK].

Note:

D.BASS BEAT: This function emphasises the attack level of

the drumbeat and produces a punchy sound. Depending on

the track, the effect may be small.

Illumination

You can switch on or switch off the illumination on the

system.

1 Press [SETUP] repeatedly to select

“ILLUMINATION”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

When the dimmer function is switched on, the illumination on

the system will remain off even when you switch on the

illumination function.

Jukebox

USB

You can use the jukebox function to add cross-fade effect

between songs.

1 Press [PLAY MENU] to select “JUKEBOX”.

2 Press [R, T] to select the setting and then press

[OK].

Using the unit

Press [JUKEBOX] to select the setting.

Note:

• The system switches to repeat mode automatically when

you switch on the jukebox.

• The jukebox is switched off when you switch off the system

or change to another source.

• The cross-fade function may not work between songs that

have different sampling frequencies.

Changing the repeat setting

1 Press [PLAY MENU] repeatedly to select

“PLAYMODE”.

2 Press [R, T] to select the setting and then press

[OK].

BASS/MID/TREBLE –4 to +4

Note:

These settings can change when you

select a PRESET EQ setting.

Using the “Panasonic MAX Juke” app

You can download and install the free Android™ app

“Panasonic MAX Juke” on Google Play™ for additional

features, such as to request song playback from multiple

devices simultaneously. You can also call up the tracks

you want to play through the app. For details on the app,

refer to the site below.

http://av.jpn.support.panasonic.com/support/global/

cs/audio/app/

(This site is in English only.)

OFF CROSSFADE Cancel cross-fading.

ON CROSSFADE Add cross-fading.

OFF Switch off the jukebox.

RANDOM REPEAT

RND

Repeat random playback.

ALL TITLE REPEAT Repeat all tracks.

SC-UA30 E TQBJ2152 En.fm Page 10 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Using a microphone

Preparation

Decrease the volume of the system to its minimum before

you connect or disconnect a microphone.

1 Connect a microphone (not supplied) to the

microphone jack.

Plug type: Ø 6.3 mm monaural

2 Press [SOUND] repeatedly to select “MIC VOL”.

3 Press [R, T] to adjust the volume of the

microphone and then press [OK].

4 If you want to sing with the background music,

play the music source and adjust the volume of

the system.

Note:

• If a strange noise (howling) is emitted, move the microphone

away from the speakers, or decrease the volume of the

microphone.

• When you do not use the microphone, disconnect it from the

microphone jack, and decrease the volume of the

microphone to its minimum.

Karaoke

Preparation

Select the music source.

Note:

The Karaoke function is switched off when you switch off the

system.

Karaoke effect

You can use the Karaoke effect function to add sound

effects.

1 Press [SOUND] repeatedly to select “KARAOKE

EFFECT”.

2 Press [R, T] to select the effect.

To check the current setting, press [OK].

3 Press [2/3] or [5/6] to select the setting

and then press [OK].

Note:

To use Karaoke effect in D-IN or AUX source, set

“D-IN MODE” or “AUX MODE” to “MODE 1” (~13).

Clock and timers

Setting the clock

This is a 24-hour clock.

1 Press [SETUP] to select “CLOCK”.

2 Press [R, T] to set the time and then press [OK].

Rear panel of this unit

Microphone

(not supplied)

VOCAL

CANCEL

Reduce the vocal level or change the

audio mode (depending on the source).

ECHO Add an echo effect to the sound.

KEY

CONTROL

Change the key of a song.

Note:

The setting is cancelled when you change

to another source.

TEMPO USB

Change the speed of a song.

BGM Change the background music level.

MIC EQ Select a MIC EQ mode.

OFF Cancel the effect.

Press [OK] to confirm.

VOCAL

CANCEL

“OFF”, 1 to 3, “L”, “R”, “L+R”

When using stereo source not

formatted for Karaoke

It is recommended to use “2 VOCAL

CANCEL” for most songs.

When using Karaoke formatted

source

L: Only left channel sound

(accompaniment only)

R: Only right channel sound (vocals

only)

L+R: Left and right channel sounds are

mixed

ECHO “OFF”, 1 to 4

KEY

CONTROL

–6 to +6

TEMPO “OFF”, –2 to +2

BGM “OFF”, 1 to 3

MIC EQ “SINGING” or “SPEECH”

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 11 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

To check the time

Press [SETUP] to select “CLOCK” and then press

[OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP] to select the setting (in minutes).

To cancel, select “OFF”.

To check the remaining time

Press [SLEEP].

Note:

• The remaining time is shown for a few seconds every

minute. “SLEEP 1” is always shown when only 1 minute

remains.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

Play timer

(Except for Bluetooth

, D-IN and AUX source)

You can set the timer to come on at a certain time to wake

you up.

Preparation

Set the clock.

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [R, T] to set the start time and then press

[OK].

3 Do step 2 again to set the end time.

4 Press [R, T] to select the source you want to play

and then press [OK].

To start the timer

1 Prepare the source you want to listen to (USB or

radio) and set the volume.

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [R, T] to select “PLAY ON” and then press

[OK].

“#” is shown.

To cancel, select “PLAY OFF”.

The system must be switched off for the timer to

operate.

To check the setting

Press [SETUP] repeatedly to select “TIMER ADJ” and

then press [OK].

In standby mode, press [DISPLAY] two times.

Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and then switch on again while a

timer is in operation, the timer will not stop at the end time.

External equipment

Preparation

• Disconnect the AC mains lead.

• Switch off all equipment and read the appropriate

operating instructions.

Note:

• Do not bend cables at sharp angles.

• Components and cables are sold separately.

• Sound distortion can occur when you use an adaptor.

• If you want to connect equipment other than those

described, refer to the audio dealer.

Using the optical input

You can connect a TV, VCR, DVD player etc., and listen to

the audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “D-IN”.

3 Play the external equipment.

Note:

• This system supports linear PCM signals.

• Multi-channel source will be converged to 2 channels.

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, up to 96 kHz

• The sound is muted if the signal format or frequency is not

supported.

• If there are sounds coming from the TV’s speakers,

decrease the volume of the TV to its minimum.

SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120

OFF

Rear panel

of this unit

Optical digital

audio cable

(not supplied)

TV (not supplied)

SC-UA30 E TQBJ2152 En.fm Page 12 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Using the auxiliary input

You can connect a VCR, DVD player etc., and listen to the

audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “AUX”.

3 Play the external equipment.

D-IN mode and AUX mode

1 Press [SELECT <, >] repeatedly to select “D-IN” or

“AUX”.

2 Press [PLAY MENU] to select “D-IN MODE” or

“AUX MODE”.

3 Press [R, T] to select the mode and then press

[OK].

Others

Auto off

This system automatically switches off when you do not

use it for approximately 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

• This function does not work when you are in radio source or

when a Bluetooth

device is connected.

• This function may not work when a microphone is connected.

Bluetooth

standby

This function automatically switches on the system when

you establish a Bluetooth

connection from a paired

device.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you are

connected to a Bluetooth

device before switching off the

system, wait for a minimum of 5 seconds before connecting to

this system from your Bluetooth

device again.

Software update

Occasionally, Panasonic may release updated software

for this unit that may add or improve the way a feature

operates. These updates are available free of charge. For

more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

█

Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.”

and then press [OK].

The software version is shown.

2 Press [OK] again to exit.

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult your

dealer for instructions.

█

Common problems

The unit does not work.

• The safety device has been activated. Do the following:

1. Press [1] on the unit to switch the unit to standby mode.

If the unit does not switch to standby mode, disconnect

the AC mains lead and then connect it again.

2. Press [1] again to switch on the unit. If the problem

persists, consult your dealer.

The display panel lights up and changes continuously in

standby mode.

• Press and hold [8] on the unit to select “DEMO OFF”.

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause, and

then switch on again. It can be caused by straining of the

speakers through excessive volume or power, and when

using the system in a hot environment.

MODE 1 Select this mode to use the Karaoke effect

function.

MODE 2

(default)

Select this mode when watching TV, movies

or using an external player with Karaoke

features.

Rear panel

of this unit

Audio cable

(not supplied)

DVD player (not supplied)

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 13 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

A humming sound can be heard during playback.

• An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

The sound level reduces.

• The protection circuit has been activated due to the

continuous use at high volume output. This is to protect the

system and maintain the sound quality.

█

USB

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it are not

compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

█

Bluetooth

Pairing cannot be done.

• Check the Bluetooth

device condition.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do pairing

again.

• The pairing of the device has been replaced. Do pairing

again.

• This system might be connected to a different device.

Disconnect the other device and try connecting the device

again.

• The system may have a problem. Switch off the system and

then switch on again.

• If “MODE 2” is selected in “LINK MODE”, select “MODE 1”

(~8).

The device is connected but audio cannot be heard

through the system.

• For some built-in Bluetooth

devices, you have to set the

audio output to “SC-UA30” manually. Read the operating

instructions of the device for details.

Sound from the device is interrupted.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

• Remove any obstacle between the system and the device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.) are

interfering. Move the device nearer to the system and

distance it from the other devices.

• Select “MODE 1” for stable communication (~8).

█

Radio

Sound is distorted.

• Use an optional FM outdoor antenna. The antenna should

be installed by a competent technician.

A beat sound is heard.

• Switch off the TV or move it away from the system.

• Move mobile telephones away from the system if the

interference is apparent.

█

D-IN, AUX

Playback image and sound are not synchronised.

• When in D-IN source, set “D-IN MODE” to “MODE 2”.

• When in AUX source, set “AUX MODE” to “MODE 2”.

Karaoke effect cannot be used.

• When in D-IN source, set “D-IN MODE” to “MODE 1”.

• When in AUX source, set “AUX MODE” to “MODE 1”.

█

Unit displays

“--:--”

• You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

• Track play time is more than 99 minutes.

“ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“ADJUST TIMER”

• The play timer is not set. Adjust the play timer.

“AUDIO UNSUPPORTED”

• The signal format or frequency is not supported.

• This system does not support bitstream signals. Change the

digital audio output setting on the external equipment to

PCM.

• This system supports sampling frequencies of 32 kHz,

44.1 kHz, 48 kHz, up to 96 kHz. Select only the supported

sampling frequencies on the connected equipment.

• Try connecting the external equipment by using the auxiliary

input.

“AUTO OFF”

• The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button.

“ERROR”

• An incorrect operation was done. Read the instructions and

try again.

“F” / “F” (“” represents a number.)

• The protection circuit has been activated and the system

may be switched off automatically.

• Disconnect the AC mains lead and wait for a few seconds

before connecting it again. If the problem persists,

disconnect the AC mains lead and consult your dealer.

“NO PLAY”

“UNSUPPORT”

• There is no album or track in the USB device.

• Examine the content. You can only play supported format.

• The system may have a problem. Switch off the system and

then switch on again.

“NOT SUPPORTED”

• To use Karaoke effect in D-IN or AUX source, set

“D-IN MODE” or “AUX MODE” to “MODE 1”.

“PLAYERROR”

• An unsupported MP3 file has been played. The system will

skip that track and play the next one.

“REMOTE 1”

“REMOTE 2”

• The remote control and the unit are using different codes.

Change the code of the remote control.

– When “REMOTE 1” is shown, press and hold [OK] and [ ]

on the remote control for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold [OK] and [<]

for a minimum of 4 seconds.

“USB NO DEVICE”

• The USB device is not connected. Examine the connection.

SC-UA30 E TQBJ2152 En.fm Page 14 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

“USB OVER CURRENT ERROR”

• The USB device is drawing too much power. Disconnect the

USB device, switch off the system and then switch on again.

• Check the connection, it may be caused by a faulty USB

cable.

“VBR”

• The system cannot show the remaining play time for variable

bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to the remote

control of this system, change the remote control code for

this system.

Preparation

Press [SELECT] repeatedly on the unit to select “AUX”.

█

To set the code to “REMOTE 2”

1 Press and hold [SELECT] on the unit and [<] until

“REMOTE 2” is shown.

2 Press and hold [OK] and [<] for a minimum of

4 seconds.

█

To set the code to “REMOTE 1”

1 Press and hold [SELECT] on the unit and [ ] on

the remote control until “REMOTE 1” is shown.

2 Press and hold [OK] and [ ] on the remote

control for a minimum of 4 seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1 Disconnect the AC mains lead.

2 While you press and hold [1] on the unit,

connect the AC mains lead again.

Continue to press and hold the button until

“–––––––––” is shown.

3 Release [1].

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

Specifications

█

General

Dimensions (W x H x D) 265 mm x 606 mm x 272 mm

Mass 8 kg

Operating temperature range 0°C to +40°C

Operating humidity range

20% to 80% RH (no condensation)

█

Amplifier section

RMS output power

Front Ch (x 2 channel)

150 W per channel (4 Ω), 1 kHz, 30% THD

Total RMS power 300 W

█

Tuner, terminals section

Frequency modulation (FM)

Preset memory 30 stations

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 Ω (unbalanced)

Digital audio input

Optical digital input Optical terminal

Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz

Audio format PCM

Analog audio input

Audio input Pin jack (1 system)

Microphone

Terminal Mono, 6.3 mm jack (2 system)

█

USB section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

Power supply AC 220 V to 240 V, 50 Hz

Power consumption 51 W

Power consumption in standby mode (approximate)

With “BLUETOOTH STANDBY” set to “OFF” 0.5 W

With “BLUETOOTH STANDBY” set to “ON” 0.6 W

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 15 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

█

Bluetooth

section

Version Bluetooth

Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP, SPP

Frequency band 2.4 GHz band FH-SS

Operating frequency 2402 MHz to 2480 MHz

Maximum power (EIRP) 4 dBm

Operation distance 10 m line of sight

Supported codec SBC

█

Speaker section

Speaker unit(s)

Woofer 13 cm cone type x 2 pieces

Tweeter 4 cm cone type x 4 pieces

Note:

• Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the digital spectrum

analyser.

References

About Bluetooth

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law in some

countries:

– Taking apart or modifying the unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

equipped devices is not guaranteed.

• All devices must conform to standards set by the

Bluetooth SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth

security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient. Transmit

data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the environment,

obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to other

Bluetooth

devices or the devices that use the 2.4 GHz

band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc.).

Licenses

Panasonic bears no responsibility for data and/or

information that is compromised during a wireless

transmission.

The Bluetooth

word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by Panasonic Corporation is under

license. Other trademarks and trade names are those of

their respective owners.

Android and Google Play are trademarks of Google LLC.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling

systems

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries must not be mixed with general

household waste.

For proper treatment, recovery and recycling

of old products and used batteries, please

take them to applicable collection points in

accordance with your national legislation.

By disposing of them correctly, you will help to

save valuable resources and prevent any

potential negative effects on human health

and the environment.

For more information about collection and

recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

SC-UA30 E TQBJ2152 En.fm Page 16 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

English

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this

product is in compliance with the essential requirements

and other relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to

our RE products from our DoC server:

http://www.ptc.panasonic.eu

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Germany

Latviski

Atbilstības deklarācija (DoC)

Ar šo “Panasonic Corporation” paziņo, ka šis izstrādājums

atbilst pamatprasībām un pārējiem Direktīvas 2014/53/ES

noteikumiem.

Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu RE

izstrādājumos no mūsu DoC servera:

http://www.ptc.panasonic.eu

Lūdzam sazināties ar pilnvaroto parstāvi:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Vācijā

Lietuviškai

Atitikties deklaracija (AD)

Bendrovė “Panasonic Corporation” patvirtina, kad šis

gaminys atitinka direktyvos 2014/53/ES esminius

reikalavimus ir kitas taikytinas nuostatas.

Mūsų RE gaminių originalios atitikties deklaracijos kopiją

klientai gali atsisiųsti iš mūsų AD serverio:

http://www.ptc.panasonic.eu

Įgaliotojo atstovo adresas:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Vokietija

Slovensko

Izjava o skladnosti (DoC)

“Panasonic Corporation” v tem dokumentu izjavlja, da je

izdelek v skladu z bistvenimi zahtevami in drugimi

pomembnimi določbami Direktive 2014/53/EU.

Stranka lahko naloži izvod izvirnega DoC o naših izdelkih

RE s strežnika DoC:

http://www.ptc.panasonic.eu

Naslov pooblaščenega predstavnika:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Nemčija

Slovensky

Vyhlásenie o zhode (DoC)

“Panasonic Corporation” týmto vyhlasuje, že tento

výrobok je v súlade so základnými požiadavkami a

ďalšími príslušnými ustanoveniami smernice 2014/53/EÚ.

Zákazníci si môžu stiahnuť kópiu pôvodného DoC na

naše RE výrobky z nášho servera DoC:

http://www.ptc.panasonic.eu

Kontakt na splnomocneného zástupcu:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Nemecko

Magyar

Megfelelőségi Nyilatkozat (DoC)

Ezennel a, “Panasonic Corporation” kijelenti, hogy a jelen

termék kielégíti az 2014/53/EU Irányelv létfontosságú

követelményeit és más vonatkozó rendelkezéseit.

A vásárlók letölthetik az RE termékek eredeti DoC

másolatát a DoC szerverünkről:

http://www.ptc.panasonic.eu

A hivatalos képviselő elérhetősége:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Németország

Type of wireless Frequency band

Maximum power

(dBm E.I.R.P.)

Bluetooth

2402 – 2480 MHz 4 dBm

Bezvadu tips Frekvenču josla

Maksimālā jauda

(dBm EIRP)

Bluetooth

2402 – 2480 MHz 4 dBm

Bevielio ryšio

tinklas

Dažnių

diapazonas

Maksimali

siuntimo galia

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Vrsta brezžične

povezave

Frekvenčni pas

Največja moč

(dBm EIRP)

Bluetooth

2402 – 2480 MHz 4 dBm

Typ bezdrôtového

pripojenia

Frekvenčné

pásmo

Maximálny výkon

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Wireless típus Frekvenciasáv

Maximális

teljesítmény

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 17 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Ελληνικά

Δήλωση συμμόρφωσης (DoC)

H “Panasonic Corporation” δηλώνει ότι το προϊόν αυτό

είναι συμμορφωμένο προς τις βασικές απαιτήσεις και

άλλες σχετικές διατάξεις της Οδηγίας 2014/53/EΕ.

Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του

πρωτοτύπου DoC για τα RE προϊόντα μας από τον DoC

server μας:

http://www.ptc.panasonic.eu

Επικοινωνήστε με τον Εξουσιοδοτημένο Αντιπροσωπό μας:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Γερμανία

Português

Declaração de Conformidade (DoC)

Com o presente documento, a “Panasonic Corporation”

declara que este produto se encontra em conformidade

com os requisitos específicos e demais especificações

referentes à Diretiva 2014/53/UE.

Os clientes podem baixar uma cópia da declaração de

conformidade (DoC) para nossos produtos RE do Server

DoC:

http://www.ptc.panasonic.eu

Contacto com um Representante Autorizado:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Alemanha

Eesti keel

Vastavusdeklaratsioon (DoC)

Käesolevaga kinnitab “Panasonic Corporation”, et see

toode vastab direktiivi 2014/53/EL olulistele nõuetele ja

teistele asjakohastele sätetele.

Kliendid saavad koopia meie RE toodetele kehtiva

originaalvastavusdeklaratsiooni koopia alla laadida meie

DoC-serveristt:

http://www.ptc.panasonic.eu

Võtke ühendust volitatud esindajaga:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Saksamaa

Norsk

Samsvarserklæring (DoC)

“Panasonic Corporation” erklærer herved at dette

produktet samsvarer med de grunnleggende kravene og

andre relevante bestemmelser i direktivet 2014/53/EU.

Kundene kan laste ned en kopi av den originale

samsvarserklæringen (DoC) for vårt RE utstyr fra vår DoC

server:

http://www.ptc.panasonic.eu

Kontaktinformasjon autorisert representant:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Tyskland

Български

Декларация за съответствие (DoC)

С настоящото “Panasonic Corporation” декларира, че

този продукт е в съответствие с основните изисквания

и други съответни разпоредби на Директива

2014/53/EС.

Потребителите могат да свалят копие от оригиналните

DoC към нашите продуктите от типа RE от сървъра, на

който се съхраняват DoC:

http://www.ptc.panasonic.eu

Свържете се с нашия упълномощен представител:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Германия

Român

Declaraţie de Conformitate (DoC)

“Panasonic Corporation” declară prin prezenta că acest

produs este conform cu cerinţele esenţiale şi alte

prevederi relevante ale Directivei 2014/53/UE.

Clienţii pot descărca o copie a DoC-ului original al

produselor noastre RE de la adressa noastră DoC din

Internet:

http://www.ptc.panasonic.eu

Contactaţi Reprezentantul Autorizat:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Germania

Τύπο ασύρματης

Ζώνη

συχνοτήτων

Μέγιστη ισχύς

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Tipo de ligação

sem fios

Banda de

frequência

Potência

máxima

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Juhtmevaba

seadme tüüp

Sagedusriba

Maksimaalne

võimsus

(dBm EIRP)

Bluetooth

2402 – 2480 MHz 4 dBm

Type trådløs Frekvensbånd

Maks. effekt

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Вид безжична

връзка

Честотна лента

Максимална

мощност

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Tip de wireless

Interval de

frecvenţă

Putere

maximă

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

SC-UA30 E TQBJ2152 En.fm Page 18 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 En.fm

Hrvatski

Deklaracija o podobnosti (DoC)

Ovime „Panasonic Corporation” izjavljuje da ovaj proizvod

udovoljava osnovnim zahtjevima i ostalim relevantnim

odredbama Direktive 2014/53/EU.

Kupci mogu preuzeti kopiju originalne DoC za naše RE

proizvode s našeg DoC poslužitelja:

http://www.ptc.panasonic.eu

Adresa ovlaštenog predstavništva:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Njemačka

Türkçe

Uygunluk Beyanı (DoC)

“Panasonic Corporation” bu belge ile bu ürünün

2014/53/EU Direkti’nin temel gerekliliklerine ve diğer ilgili

hükümlerine uygun olduğunu beyan eder.

Müşterilerimiz RE ürünlerimizle ilgili orijinal DoC

belgesinin bir kopyasını DoC sunucumuzdan indirebilir:

http://www.ptc.panasonic.eu

Yetkili Temsilci ile temasa geçin:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Almanya

Vrsta bežične

mreže

Frekvencijski

pojas

Maksimalna

snaga

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

Kablosuz türü Frekans bandı

Maksimum güç

(dBm e.i.r.p.)

Bluetooth

2402 – 2480 MHz 4 dBm

ENGLISH

SC-UA30 E TQBJ2152 En.fm Page 19 Monday, August 6, 2018 4:53 PM

TQBJ2152

D:\Publishing\Panasonic\SC-UA30\SC-UA30 E TQBJ2152 Po.fm

Zakupione urządzenie może różnić się od

przedstawionego na ilustracjach.

Symbole na tym produkcie (włącznie z akcesoriami)

oznaczają, co następuje:

Deklaracja Zgodności (DoC)

Niniejszym, „Panasonic Corporation” deklaruje, iż

niniejszy produkt jest zgodny z zasadniczymi wymogami i

innymi odnośnymi postanowieniami Dyrektywy 2014/53/UE.

Klienci mogą skopiować oryginał Deklaracji Zgodności

(DoC) dla naszych produktów radiowych i końcowych

urządzeń teletransmisyjnych (RE) z naszego serwera DoC:

http://www.ptc.panasonic.eu

Kontakt z autoryzowanym przedstawicielem:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Niemcy

Spis treści

Środki ostrożności. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Dostarczone wyposażenie . . . . . . . . . . . . . . . . . . . . . . . 3

Konserwacja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Transportowanie urządzenia. . . . . . . . . . . . . . . . . . . . . . 3

Przygotowanie pilota zdalnego sterowania. . . . . . . . . . . 4

Podłączenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Opis elementów sterowania . . . . . . . . . . . . . . . . . . . . . . 5

Przygotowanie multimediów . . . . . . . . . . . . . . . . . . . . . . 6

Odtwarzanie multimediów. . . . . . . . . . . . . . . . . . . . . . . . 7

Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Efekty dźwiękowe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Podświetlenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Jukebox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Używanie mikrofonu . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Karaoke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Zegar i timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Urządzenia zewnętrzne . . . . . . . . . . . . . . . . . . . . . . . . 11

Inne. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Rozwiązywanie problemów. . . . . . . . . . . . . . . . . . . . . . 12

Dane techniczne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Odnośniki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Środki ostrożności

OSTRZEŻENIE!

Urządzenie

• Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Nie należy wystawiać urządzenia na działanie

deszczu, wilgoci, kapanie lub zachlapanie.

– Na urządzeniu nie należy umieszczać żadnych

przedmiotów napełnionych płynami, np. dzbanków.

– Należy stosować zalecane akcesoria.

– Nie zdejmować pokrywy.

– Użytkownik nie powinien podejmować się naprawy

urządzenia na własną rękę. Serwis należy zlecić w

autoryzowanym punkcie serwisowym.

– Należy uważać, aby do wnętrza urządzenia nie

dostały się metalowe przedmioty.

UWAGA!

Urządzenie

• Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Niniejszego urządzenia nie należy instalować lub

umieszczać w biblioteczce, wbudowanej szafce lub

innej ograniczonej przestrzeni. Należy zapewnić

odpowiednią wentylację urządzenia.

– Nie zasłaniaj otworów wentylacyjnych urządzenia

gazetami, obrusami, zasłonami i podobnymi

przedmiotami.

– Nie umieszczać na urządzeniu źródeł otwartego

ognia, jak np. zapalone świece.

• Urządzenie jest przeznaczone do używania w klimacie

umiarkowanym.

• To urządzenie może odbierać zakłócenia wywołane

użyciem telefonu komórkowego. Jeżeli takie zakłócenia

wystąpią, wskazane jest zwiększenie odległości

pomiędzy urządzeniem a telefonem komórkowym.

• Urządzenie należy ustawić na równej powierzchni, z

dala od miejsc bezpośrednio nasłonecznionych, w

których panuje wysoka temperatura, duża wilgotność

lub występują nadmierne drgania.

Przewód zasilania

• Wtyczka przewodu sieciowego umożliwia odłączenie

zasilania urządzenia. Urządzenie należy zamontować w

sposób umożliwiający szybkie wyjęcie wtyczki z gniazda

zasilania.

Bateria

• Istnieje niebezpieczeństwo wybuchu w przypadku, gdy

baterie zostaną nieprawidłowo założone. Baterie należy

wymieniać na takie same lub na baterie równorzędnego

typu, zalecane przez producenta.

• Zużyte baterie należy odpowiednio zutylizować.

Właściwą metodę powinny wskazać władze lokalne.

• Nie zbliżać baterii do źródeł ciepła lub ognia.

• Baterii nie należy pozostawiać przez dłuższy czas, w

pojeździe z zamkniętymi drzwiami i oknami, narażonym

na bezpośrednie promieniowanie słoneczne.

• Nie wolno zwierać biegunów baterii ani jej rozbierać.

• Nie ładować baterii alkalicznych ani manganowych.

• Nie wolno używać baterii, z których została zdjęta

warstwa ochronna.

• Jeśli pilot ma nie być używany przez dłuższy czas,

należy wyjąć z niego baterię. Przechowywać w

chłodnym, ciemnym miejscu.

Prąd przemienny

Sprzęt klasy II (konstrukcja urządzenia zapewnia

podwójną izolację.)

WŁ.

Gotowość

Typ łączności

bezprzewodowej

Pasmo

częstotliwości

Maksymalna moc

(dBm EIRP)

Bluetooth

2402 – 2480 MHz 4 dBm

SC-UA30 E TQBJ2152 Po.fm Page 2 Monday, August 6, 2018 4:57 PM

Stránka sa načítava ...

Panasonic SCUA30E Návod na používanie

Značka: Panasonic

Model: SCUA30E

Typ: Návod na používanie

Táto príručka je tiež vhodná pre

SCUA30

Stiahnite si PDF

správa

V iných jazykoch

polski: Panasonic SCUA30E Instrukcja obsługi

Panasonic SCUA30E Návod na používanie

Táto príručka je tiež vhodná pre

Panasonic SCUA30E Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty