Silvercrest SFK 16 A1 User Manual And Service Information

Wireless Doorbell

Daljinski zvonec

Navodila za uporabo

in servisne informacije

SI

Zvonček

Používateľská príručka

a informácie o údržbe

SK

Wireless Doorbell

User manual and

service information

GB

Dzwonek do drzwi

sterowany radiowo

Manuel d‘utilisation et

informations sur les services

PL

Ajtócsengő

Felhasználói kézikönyv és

szerviz tájékoztatás

HU

Bezdrátový zvonek

Istruzioni per l’uso e

informationi di servizio

CZ

SFK 16 A1

4

TARGA GmbH

Lange Wende 41

D-59494 Soest

www.silvercrest.cc

Mod.-Nr. SFK 16 A1

Mat-No: 1618148

HOME TECH

Wireless Doorbell SFK 16 A1

English - 1

Table of Contents

Package Contents 3

Important Safety Instructions 5

Intended use 6

Children and Persons with Disabilities 7

Batteries 8

RF Interface 9

Operating Environment 10

Repair and Maintenance 12

Copyright 13

Conformity Notice 14

Introduction 15

Inserting the Batteries 15

Batteries for the Receiver 15

Replacing the transmitter battery 16

Mounting the Devices 17

Mounting the Transmitter 18

Mounting the Receiver 19

Filling out the Name Label 19

Operation 20

Wireless Doorbell SFK 16 A1

2 - English

Selecting the Signalisation 20

Selecting the Bell Melody 21

Adjusting the Volume 21

Appendix 22

Disposal of Old Devices 22

Technical Specifications 24

Warranty Information 25

Version 1.22

Wireless Doorbell SFK 16 A1

English - 3

Package Contents

- Receiver

- Transmitter

Wireless Doorbell SFK 16 A1

4 - English

Not illustrated:

- 3 AA-sized batteries, 1,5V

- 1 A23-sized battery

(already fitted in transmitter)

- 3 rawlplugs, 5mm

- 3 fixation screws

- 2 rubber rings

- 5 name labels

Description of figures:

1 Speaker

2 Melody selection button

3 Optical display

4 Mode selection switch

5 Volume selection switch

6 Bell button

7 Name label

8 Nose latch for upper housing piece

Wireless Doorbell SFK 16 A1

English - 5

Important Safety Instructions

Before you use this device for the first time,

please read the following notes in this manual

and heed all warnings, even if you are familiar

with handling electronic devices. Keep this

manual safe for future reference. If you sell the

device or pass it on, it is essential you hand

over this manual also.

This icon denotes important

information for the safe operation of

the product and for the user’s safety.

This symbol denotes further

information on the topic.

Wireless Doorbell SFK 16 A1

6 - English

Intended use

This wireless door bell comprising a transmitter

and a receiver is designed to initiate an acoustic

and/or visual signal on the receiver when the

transmitter is actuated. This device is not

designed for commercial use or installation and

operation in a company. This device is sold for

private use only. This device meets the

requirements of all relevant norms and

standards in conjunction with conformity.

Compliance with these standards is no longer

guaranteed in the event of unauthorised

modifications to the device. The manufacturer

does not accept any liability for any resulting

damage or faults in such cases. Only use

accessories specified by the manufacturer. Any

other use is not as intended.

Wireless Doorbell SFK 16 A1

English - 7

Children and Persons with

Disabilities

Electrical appliances do not belong in the hands

of children. People with disabilities should only

use electrical devices in appropriate

circumstances. Do not allow children or persons

with disabilities to use electrical devices when

not under supervision. These may not

comprehend the presence of potential risks.

Batteries and small parts represent potential

choking hazards. Keep the batteries in a safe

place. If a battery is swallowed, seek medical

help immediately. Keep the packaging away

from children and persons with disabilities too.

as there is danger of suffocation.

Wireless Doorbell SFK 16 A1

8 - English

Batteries

Insert the batteries with the correct polarity.

Never try to recharge the batteries and under no

circumstances throw them into fire. Do not

short-circuit any batteries. Remove batteries

when the device is not to be used for a long

time. Non-intended use may cause explosion

and danger to life. Leaked batteries must be

handed in to a collection point for old batteries.

Make sure you wear protective clothing (such as

gloves) when manipulating leaked batteries.

Wireless Doorbell SFK 16 A1

English - 9

RF Interface

Place the device at least 20cm (8 inches) away

from pacemakers, as the RF signals may

interfere with the functionality of the pacemaker.

The transmitted RF signals can cause

interference with hearing aids. Do not place the

device with the wireless adapter turned on near

flammable gases or in an explosion-sensitive

area (e.g. a paint shop), as the transmitted RF

signals may cause explosions or fire. The range

of the radio wave signals depends on

environmental conditions.

Wireless Doorbell SFK 16 A1

10 - English

Operating Environment

Receiver

The receiver is not designed for use in

environments with a high temperature or

humidity (e.g. bathrooms), and must be kept

free from dust. Operating temperature and

operating humidity: 5°C to 40°C, max. 90% RH.

Transmitter

The transmitter is designed for use in

environments with a high humidity (e.g.

bathroom) and is protected against water

splashes. Operating temperatures and

operating air humidity: -10°C to +40°C, higher

than 90% rel. air humidity.

Wireless Doorbell SFK 16 A1

English - 11

Always make sure that:

- no direct heat sources (e.g. heating) can

affect the devices;

- the receiver is not exposed to direct

sunlight or artificial light;

- the devices are never placed in the

immediate vicinity of magnetic fields (e.g.

loudspeakers);

- no fire sources (e.g. burning candles) are

placed on or near the devices;

- no foreign bodies are introduced into the

device;

- the receiver is not exposed to extreme

temperature fluctuations;

- the devices are not subject to excessive

shocks and vibrations;

Wireless Doorbell SFK 16 A1

12 - English

Repair and Maintenance

Repair work is necessary if the device has been

damaged or if water or objects have penetrated

inside the housing, the receiver is exposed to

rain or if it does not work correctly or has been

dropped. If smoke, unusual noises or smells are

noticed, power off the device immediately. In

these cases the device should not be used

further and should be inspected by authorized

service personnel. Please contact qualified

personnel when repair is needed. Only use a

clean, dry cloth for cleaning. Never use any

corrosive liquids.

Wireless Doorbell SFK 16 A1

English - 13

Copyright

The entire content of this User’s Manual is

copyrighted and is provided to the reader for

information purposes only. Copying data and

information without the prior written and explicit

authorization from the author is strictly

forbidden. This also applies to any commercial

use of the contents and information. All texts

and figures are up-to-date as per the date of

print release. We assume no liability for any

changes.

Wireless Doorbell SFK 16 A1

14 - English

Conformity Notice

This product has been tested and

approved for compliance with the basic

and other relevant requirements of the

R&TTE Directive 1999/5/EC.

The corresponding Declaration of Conformity

can be found at the end of this User's Manual.

Wireless Doorbell SFK 16 A1

English - 15

Introduction

Thank you for buying this wireless door bell.

This device enables the installation of a wireless

door bell system. You can install this wireless

bell on an entrance door, for example. There is

no need for a manual RF synchronisation

between the transmitter and the receiver.

Inserting the Batteries

Both devices are battery-powered. Insert the

supplied batteries into the receiver. The battery

of the transmitter is already fitted.

Batteries for the Receiver

- Open the receiver’s battery compartment

by pushing the back panel cover in the

direction of the arrow mark.

- Insert the supplied batteries (size AA) into

the receiver. Make sure that the batteries

are properly aligned according to the

polarity (+ and -). The correct polarity is

Wireless Doorbell SFK 16 A1

16 - English

labelled on the batteries and inside the

battery compartment.

- Slide the battery compartment cover onto

the receiver housing.

Replacing the transmitter battery

- The transmitter battery is already fitted and

only requires replacement when it is empty.

-

To open the transmitter housing, use a flat

screwdriver. Insert the screwdriver carefully

into the transmitter housing side and press

it slightly inwards to release the nose latch

(8). Then pull the upper housing piece

upwards.

- Remove the type A23 12 V battery from the

top section of the transmitter and replace

the empty battery with a new battery of the

same type. Always ensure correct polarity

of the battery (pay attention to the + and –

marks). The correct polarity is labelled on

the battery and inside the transmitter

housing.

Wireless Doorbell SFK 16 A1

English - 17

- Replace the upper housing piece onto the

transmitter base unit.

You may also leave the base unit

piece separated if you want to

mount the transmitter on the wall.

Mounting the Devices

The package includes all necessary material for

mounting both devices. Alternatively you may

simply leave the receiver for stand-up

installation.

Make sure that the distance between

transmitter and receive does not

exceed the maximum range. If

necessary, test their proper

functionality prior to mounting the

devices in their position.

Wireless Doorbell SFK 16 A1

18 - English

Mounting the Transmitter

Look for a suitable place where you want to

mount the transmitter.

- Open the transmitter housing by inserting a

flat screwdriver into the notch on the

housing side. Carefully push the nose latch

(8) inwards. You can then remove the

upper housing piece.

- Drill two 5mm holes at a distance of 50mm

in the wall.

- Insert two of the supplied rawlplugs into

these holes.

- Place the two rubber rings into the recess

of the base plate.

- Insert two of the supplied screws through

the holes located in the bottom piece of the

transmitter housing and then screw them

onto the rawlplugs.

- Replace the upper housing piece by

pushing it onto the base unit piece.

Stránka sa načítava ...

Silvercrest SFK 16 A1 User Manual And Service Information

Silvercrest SFK 16 A1 User Manual And Service Information

V iných jazykoch

Súvisiace články

Ďalšie dokumenty