Parkside 332014 1907 Operation and Safety Notes

AUTOMATIC WELDING HELMET

AVTOMATSKA ČELADA ZA

VARJENJE

AUTOMATICKÁ ZVÁRACIA PRILBA

AUTOMATA HEGESZTŐPAJZS

SAMOZATMÍVACÍ SVÁŘEČSKÁ

KUKLA

AUTOMATIK - SCHWEISSHELM

Operation and Safety Notes

Translation of the original instructions

Navodila za upravljanje in varnostna opozorila

Prevod originalnega navodila za uporabo

Návod na obsluhu a bezpečnostné upozornenia

Originálny návod na obsluhu

Kezelési és biztonsági hivatkozások

Az eredeti használati utasítás fordítása

Návod k obsluze a bezpečnostní pokyny

Originální návod k obsluze

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung

GB

SI

SK

HU

CZ

DE AT CH

AUTOMATIC WELDING HELMET PSHL 2 D1

SK

SI

CZ

HU

IAN 332014_1907

GB

Before reading, unfold the pages containing the illustrations and familiarise yourself with

all functions of the device.

HU

Olvasás előtt hajtsa ki az ábrát tartalmazó oldalt, és ezután ismerje meg a készülék

mindegyik funkcióját.

SI

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

CZ

Než začnete číst tento návod k obsluze, rozložte stránku s obrázky a seznamte se se všemi

funkcemi zařízení.

SK

Prv než začnete čítať tento návod, rozložte si stranu s obrázkami a potom sa oboznámte so

všetkými funkciami zariadenia.

DE

AT CH

Klappen Sie vor dem Lesen die Seiten mit den Abbildungen aus und machen Sie

sich anschließend mit allen Funktionen des Gerätes vertraut.

GB Operation and Safety Notes Page 5

HU Kezelési és biztonsági hivatkozások Oldal 21

SI Navodila za upravljanje in varnostna opozorila Stran 39

CZ Návod k obsluze a bezpečnostní pokyny Strana 55

SK Návod na obsluhu a bezpečnostné upozornenia Strana 71

DE / AT / CH Montage-, Bedienungs- und Sicherheitshinweise Seite 87

A

1

2

3

4

B

5

1

2

3

5

6

4

7

9

8

Automatic Welding Helmet

Automata hegesztőpajzs

Avtomatska čelada za varjenje

Samozatmívací svářečská kukla

Automatická zváracia prilba

Automatik-Schweißhelm

IAN: 332014_1907

Black variant 2272/Fekete változat, 2272/Črna različica 2272/Černá varianta

2272/Čierny variant 2272/Variante Schwarz 2272

Automatic Welding Helmet

Automata hegesztőpajzs

Avtomatska čelada za varjenje

Samozatmívací svářečská kukla

Automatická zváracia prilba

Automatik-Schweißhelm

IAN: 332014_1907

Variant with ﬂames 2273/Lángmintás változat, 2273/Različica s plameni 2273/

Varianta s plameny 2273/Variant s plameňmi 2273/Variante mit Flammen 2273

D

B C

12

14

E

16

10

13

11

G H

Black variant 2272/Fekete változat,

2272/Črna različica 2272/Černá

varianta 2272/Čierny variant 2272/

Variante Schwarz 2272

Variant with ﬂ ames 2273/Lángmintás

változat, 2273/Različica s plameni

2273/Varianta s plameny 2273/

Variant s plameňmi 2273/Variante

mit Flammen 2273

6

7

15

18

17

19

20

5GB

List of pictograms used ..................................................................................Page 6

Introduction .........................................................................................................Page 6

Intended use ...........................................................................................................Page 6

Package contents ....................................................................................................Page 6

Parts description for “black” version ....................................................................... Page 7

Parts description for version “with ﬂames” .............................................................Page 7

Technical speciﬁcations ..........................................................................................Page 7

Safety instructions ............................................................................................ Page 7

Using the device ................................................................................................Page 11

Troubleshooting ................................................................................................. Page 14

Cleaning and maintenance ..........................................................................Page 15

Storage ..................................................................................................................Page 15

Information about recycling and disposal ...........................................Page 15

Meaning of the marking ...............................................................................Page 15

EU Declaration of Conformity .....................................................................Page 16

Warranty and service information ..........................................................Page 18

Warranty conditions ...............................................................................................Page 18

Warranty period and statutory claims for defects ..................................................Page 18

Extent of warranty ..................................................................................................Page 18

Processing of warranty claims ................................................................................Page 19

Service ....................................................................................................................Page 19

Table of contents

6 GB

List of pictograms used / Introduction

Automatic Welding Helmet

PSHL 2 D1

z Introduction

Congratulations! You have

purchased one of our

high-quality devices. Please familiarise

yourself with the product before setup or

ﬁrst use. To do so, please read through the

following operating and safety instructions

carefully.

KEEP OUT OF THE REACH OF

CHILDREN!

z Intended use

When welding, this welding helmet protects

the eyes and face from sparks, splashes and

UV radiation and automatically adjusts to

the lighting conditions. It ensures immediate,

sensor-controlled darkening when the arc

is ignited as well as automatic lightening

when welding work is ﬁnished (including

short delay for protection against afterglow).

Thewelding helmet has an inﬁnitely adjusta-

ble DIN protection level with side adjustment

wheel and can also be set for ﬂying sparks

during grinding work. Use the product

only as described and only for the speciﬁc

applications as stated. Keep these instruc-

tions in a safe place. Ensure you hand over

all documentation when passing the product

on to anyone else. Any use that differs to the

intended use as stated above is prohibited

and potentially dangerous. Damage or

injury caused by misuse or disregarding

the above warning is not covered by the

warranty or any liability on the part of the

manufacturer. The device has been designed

for household use only and must not be used

in commercial or industrial applications.

z Package contents

1 Automatic Welding Helmet

1 Set of operating instructions

List of pictograms used

Caution!

Read the operating instructions!

Warning:

Potential hazards!

Do not dispose of any electrical

devices in domestic waste!

Important note!

Attention: Welding helmets do

not offer any form of protection

for the eyes, ears or face!

Attention:

Arc beams can damage the

retina of the eye!

Made from recycling material

Dispose of batteries in an

environmentally friendly

manner!

Dispose of packaging properly.

Do not dispose of the appliance

in household waste!

Direct current

7GB

Introduction / Safety instructions

z Parts description for

“black” version

1

Viewing pane

2

Helmet casing

3

Solar cell

4

Rear lens

5

Headband

6

Rear control dial headband

7

Lateral control dial headband

8

UV ﬁlter

9

Darkening control

10

Test button

11

Delay setting

12

Sensitivity setting

13

Low battery display

14

LED light switch

15

Battery compartment

16

Bracket

17

Arc sensor

19

LED light

20

Darkening switch

z Parts description for

version “with ﬂames”

1

Viewing pane

2

Helmet casing

3

Solar cell

4

Rear lens

5

Headband

6

Rear control dial headband

7

Lateral control dial headband

8

UV ﬁlter

9

Darkening control

10

Test button

11

Delay setting

12

Sensitivity setting

13

Low battery display

14

LED light switch

15

Battery compartment

17

Arc sensor

18

Slide

19

LED light

20

Darkening switch

z Technical speciﬁcations

Filter cassette size: 110x90x15 mm

Field of vision: 9.2x4.2 cm

Light condition: DIN 4

Dark condition: DIN 5 – DIN 9 /

DIN 9 – DIN 13

Cycle times

Light to dark: 0.23~0.72 ms

Dark to light: 0.1~2 s

Switching on/off

Filter: Fully automatic

Switching on/off

LED: manual

Energy supply: Solar cell

UV/IR protection: DIN 16

Operating temperature: -5 °C to +55 °C

Storage temperature: -20 °C to +70 °C

W

elding processes: MMA, MIG,

MAG, TIG,

plasma cutting and

plasma welding

Maximum service life:

approx. 5 years

Safety instructions

Please read the operating instruc-

tions with care and observe the

notes described. Familiarise

yourself with the device, its

proper use and the safety notes

based on these operating instruc-

tions. The rating plate contains

all technical data of this welding

helmet; please learn about the

technical features of this product.

8 GB

Safety instructions

 Prior to each use, check that

it is working properly by

pressing the “Test” button.

 The product is not suitable for

laser welding.

 The product is only approved

for use within a temperature

range of between -5 °C to

+55°C.

 The product is not ﬁre-resistant.

 Welding helmet and UV ﬁlter

must not be exposed to any

heat or moisture.

 Do not remove the ADF ﬁlter

from the welding helmet and

never open the housing of the

ADF ﬁlter without authorisation

from the manufacturer.

 Prior to each use, check

whether the Welding/Grinding

setting was selected correctly.

 The viewing pane must be

installed on the outer side of

the ADF ﬁlter. Otherwise, the

ADF ﬁlter can get damaged.

 Do not carry out any modiﬁ-

cations/replacements on the

welding helmet and ADF ﬁlter

without consent.

 If the ﬁlter does not darken

automatically whilst welding

please stop the operation

immediately and contact the

dealers without delay.

 Do not use any alcohol, fuel

or diluting agents to clean the

ADF ﬁlter. Do not place the

ADF ﬁlter in water.

 The response time of the ADF

liquid crystal slows down if the

ambient temperature is lower,

however this does not have

an impact on the protective

functions.

 Please replace the housing

of the ADF ﬁlter immediately

if it is damaged or scratched

because this can impair

visibility and the protective

performance.

 Please replace the viewing

pane immediately if it is bro-

ken or scratched. Do not use

any hard objects to replace the

viewing pane of the ﬁlter.

 Regularly clean the surfaces

of the ADF ﬁlter, sensor and

solar cells.

 The welding helmet cannot

withstand any damages that

are caused by a heavy blow,

explosion or abrasive liquids.

 The useful life depends on

many different individual

factors such as usage, clean-

ing, storage and maintenance.

Regular inspections and

replacement in the case of

damage are recommended.

 The material used to manufac-

ture the product will age

over time. This can result in

9GB

Safety instructions

breakages on the welding hel-

met, for example. As a result

of these damages, the welding

helmet is no longer able to

provide effective protection.

In this case, the user should

replace the welding helmet

immediately.

 This product cannot be used

for overhead welding work

and cutting operations. If this

product is use for overhead

welding or cutting, the molten

metal drops could burn

through the ADF ﬁlter and

result in injuries to the user.

 If the ﬁlter is faulty, the user

must stop using the welding

helmet immediately. Slag

splashes can damage the

surface of the ﬁlter and cause

injury to the user’s skin or

cause other serious accidents.

 This product is temperature

resistant and hardly inﬂam-

mable but in case of direct

contact with naked ﬂames or

in case of access to an object

with a high temperature, the

helmet may begin to burn or

melt. Please store and only

use the welding helmet in the

manner described in order to

reduce such risks.

 The ADF ﬁlter is an electronic

product that is not waterproof.

Please ensure it is kept dry

and clean and not stored in

a damp environment.

 Improper use can result in

injuries to the user and other

types of illnesses.

 Please examine the ﬁlter prior

to each use. As soon as the

function and appearance

seem defective, they must no

longer be used.

 The use of the welding helmet

is prohibited if the ﬁlter ﬂickers

or if the level of darkening

no longer corresponds to

the standard value or there

are other abnormal working

conditions.

 Please do not expose this

product to unnecessary solar

radiation.

 Please only use original spare

parts. The use of non-original

parts can cause problems

with regard to the protective

function, serviceability and

degree of product protection.

 Exceeding the service life

(insufﬁcient protection) –

please check the welding

helmet prior to each use for

damage and durability.

 Using eye protection without

the ﬁlter effect against radia-

tion (damages the eyes) – prior

to each use check whether

10 GB

Safety instructions

the eye protection exhibits the

necessary scale number.

 Using the product against

splashes (insufﬁcient protec-

tion) – always check whether

the correct protective effect is

present.

 Using the product against large

dust particles (injury, accident).

The eye protection equipment

must only be used for the work

described in the operating

instructions. Any deviation from

the instructions in the operating

instructions can result in injuries

or accidents.

 Using damaged products

(insufﬁcient protection) – prior

to each use check the weld-

ing helmet for damage and

durability.

 Improper use of the eye pro-

tection (injury, accident).

The eye protection device

must only be used for the work

described in the operating

instructions. Any deviation

from the instructions can result

in injuries or accidents.

 This device may be used by

children aged 16 years and

older, and by persons with

reduced physical, sensory or

mental capacities, or a lack of

experience and knowledge,

if they are supervised or have

been instructed in how to use

the device safely and under-

stand the dangers that may

arise when using it. Do not

allow children to play with the

device. Cleaning and day-to-

day maintenance must not be

performed by children without

supervision.

 The welding helmet with

auto-darkening is not suitable

for laser and autogenous

welding.

 Never place the welding

helmet on hot surfaces.

 Do not open the welding

helmet under any circum-

stances. Do not carry out any

repair work or alterations to

the welding helmet. This work

must only be carried out by

trained specialist personnel.

 Before any welding work,

please make sure that

you have adjusted the

auto-darkening.

 The safety visor must not be

opened. It protects the ﬁlter

from dirt and damage.

 If the ﬁlter does not darken

automatically, stop the weld-

ing work immediately and

contact the manufacturer.

 Only use the welding helmet

at temperatures between

-5°C and +55°C.

11GB

Safety instructions / Using the device

The response time of the ﬁlter

will slow down if the temper-

atures go below/above these

temperatures.

 Clean the ﬁlter, helmet surface

and the solar cells regularly.

 Replace the protective visor if

it showing signs of scratches

or damage.

 The welding helmet does not

protect against impact.

 Using, cleaning and storage

can reduce the service life of

approx. 5 years. If the viewing

pane is scratched or there is

other visible damage to the

viewing pane or the welding

helmet, replace immediately.

ATTENTION! Materials which

come into contact with the skin

of the wearer can cause allergic

reactions for sensitive individuals.

ATTENTION! Eye protection

equipment against high-speed

particles can pose a danger

for the wearer through transfer

of impact if they are worn over

standard prescription glasses.

ATTENTION! If protection

against high-speed particles at

extreme temperatures is neces-

sary, the selected eye protection

equipment must be marked with

the letter T in accordance with

the letters relating to impact

intensity, i.e. FT, BT or AT. If the

letter for impact intensity is not

followed with the letter T, the eye

protection equipment must only

be used at room temperature

against high-speed particles.

z Using the device

Note: Only use the welding helmet with the

rear lens

4

ﬁtted.

Note: Keep the arc sensors

17

of the UV

ﬁlter

8

clean.

After opening the package, immediately

check to ensure that the package contents

are complete and are in perfect condition.

Contact your dealer immediately if the

package contents is incomplete or has

any defects. Do not use the device if it is

defective.

Before using the welding helmet each

time, you must check that the protective

screen as well as the helmet is intact. If

the protective screen should show signs of

scratches, cracks or unevenness, then it is

essential that it is replaced before use, as

otherwise this could lead to serious injuries.

 Remove the protective ﬁlm from the

inside and outside of the visor.

 Adjust the welding helmet with the help

of the headband

5

. Turn the rear control

dial on the headband

6

in order to

adapt the welding helmet to the respec-

tive head size and the lateral control

dials on the headband

7

to lock the

welding helmet.

During the set-up, make

sure the welding helmet is positioned as

12 GB

Using the device

low as possible on the head and as close

as possible to your face.

 Before carrying out welding work, set

the appropriate darkening level. The

darkening level can be set manually

between 5 and 9 and between 9

and13, by turning the darkening control

9

on the outside of the helmet.

Using the darkening switch

20

you

can set whether the darkening will be

set between levels 5-9 or 9-13 on the

darkening control

9

.

Table to adjust the darkening levels

Arc current (Amps)

1.5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600

Grind

Grinding function – auto-darkening is not active

SMAW 8 9 10 11 12 13 14

MAG 8 9 10 11 12 13 14

TIG/

GTAW

8 9 10 11 12 13

MIG

(heavy)

9 10 11 12 13 14

MIG

(light)

10 11 12 13 14

PAC 9 10 11 12 13

PAW 4 5 6 7 8 9 10 11 12

SMAW: Welding with coated

electrodes

MIG (heavy): MIG welding of heavy metals

MIG (light): MIG welding of light metals

and alloys

TIG/GTAW: Inert gas welding

MAG: Welding with metal active gas

PAC: Plasma cutting

PAW: Plasma welding

Grind: Grinding function: Auto-darkening

is not active. Only use the setting if

you do not use welding helmet for

welding.

ATTENTION! The darkening control

9

has the “Grind” adjustment position. If the

darkening control

9

is set to this position,

then auto-darkening is deactivated. Only use

the setting if you do not want to use welding

helmet for welding. Auto-darkening is then

not active.

 Prior to each use check the light seal.

Perform test procedure

 You can use the test button

11

to check

whether the welding helmet's darkening

feature is working properly.

 Go towards an external light source at

more than 40 W with the viewing pane

and check whether the pane becomes

darker or lighter. To do so, turn the

darkening control

9

clockwise from

"Grind" to the next position. This sets the

ﬁlter to auto-darkening mode.

13GB

Using the device

 If you turn the darkening control

9

anticlockwise back to "Grind", the ﬁlter's

auto-darkening feature is once again

deactivated.

Replace UV ﬁlter

For the black version

 Press the clip

16

downwards to replace

the UV ﬁlter / solar cell. (see Fig. D).

Subsequently you can remove the ﬁlter.

To do this press the locking mechanisms

as shown in Fig. G upwards and then

press gently against the ﬁlter from the

other side

 Then remove the darkening control

9

on the outside of the welding helmet by

simply pulling it and then releasing the

nut located below.

 Once you have released the nut from the

thread, you can completely remove the

ﬁlter from the welding helmet.

Replace UV ﬁlter

For the version with ﬂames

 Press the sliders

18

together to replace

the UV ﬁlter / solar cell. (see Fig. E).

Subsequently you can remove the ﬁlter.

To do this press the locking mechanisms

as shown in Fig. G upwards and then

press gently against the ﬁlter from the

other side

 Then remove the darkening control

9

on the outside of the welding helmet by

simply pulling it and then releasing the

nut located below.

 Once you have released the nut from the

thread, you can completely remove the

ﬁlter from the welding helmet.

Delay setting

You can adjust the delay setting

13

to

conﬁgure whether or not the auto-darkening

feature should be switched off immediately

after stopping welding work, depending

on the type of welding work. At the lowest

setting, auto-darkening is switched off

immediately. Turning the control dial further

clockwise towards the highest setting, means

that the darkening function will remain

active for longer after welding work. This

feature is very useful for handling afterglow.

Sensitivity setting

You can use the sensitivity setting

12

to

adjust the light sensitivity of the sensor.

With low incident light, the control can be

adjusted to the highest setting to ensure

that the auto-darkening feature is activated

even for a weak light source. Even with this

additional feature, you can also adjust the

light sensitivity of the sensor to suit your own

personal requirements.

LED light with lowlight sensor

The LEDs

19

integrated in the welding

helmet are controlled with the LED light

switches

14

. First set the required darkening

level. The LED

19

can be manually switched

on by pressing the LED light switch

14

(middle position “ON”).

The welding helmet as a lowlight sensor.

This is activated by switching the LED light

switch

14

to the right position “Auto”. The

lowlight sensor automatically switches the

LED lamp on in dark environments and off

in brightly lit environments. This helps to

illuminate the object being welded in dark

working conditions. The LED light switch

14

should always be switched of (left position

“OFF”) at the end of work and when storing

the welding helmet.

Battery replacement

If the battery charge level is too low you can

replace the batteries. A low battery charge

level is indicated with a red warning light on

the battery display

10

.

 In order to open the battery compartment

15

, you must push the lid of the battery

compartment

15

upwards using the

handle (see Fig. B).

14 GB

Using the device / Troubleshooting

 You can replace the battery, once you

have removed the cover of the battery

compartment

15

.

F

15

 Then, close the battery compartment

15

.

In order to close the battery compart-

ment, you must put the lid of the battery

compartment

15

on and then push the

handle downwards until the cover clicks

into place.

z Troubleshooting

Faults Cause Solution

The ﬁlter does not become dark

steadily or ﬂickers.

The viewing pane

1

is dirty or

defective.

Clean the viewing pane or

replace it.

The arc sensor

17

is not clear.

Clean the surface of the arc

sensor

17

.

The welding current is too low. Set the sensitivity to the max. level.

The reaction is slowed down.

The ambient temperature is too

low/high.

Only use the welding helmet at

temperatures between -5°C and

+55°C.

The sensitivity is too low.

Adjust the sensitivity to a higher

level.

Visibility is poor.

The viewing pane

1

/rear lens

4

is dirty.

Clean the viewing pane

1

/

rear lens

4

.

The protective ﬁlm on the rear lens

4

has not been removed.

Remove the protective ﬁlm.

The ambient light is not sufﬁcient.

Provide more light for the working

environment.

The wrong darkening level has

been set.

Re-set the darkening level.

The welding helmet slips.

The headband

5

is adjusted

incorrectly.

Re-adjust the headband

5

and

make it tighter.

15GB

Cleaning and maintenance / Storage / Information about ... / Meaning of ...

z Cleaning and maintenance

 Do not use any abrasive detergents to

clean the helmet casing

2

.

 Never allow the UV ﬁlter

8

to come into

contact with water.

 Clean the product with a soft and dry or

moistened cloth or clean it with a cloth

moistened with disinfectant.

z Storage

 Keep the device in a dry location and

out of the reach of children.

 During storage, make sure the LED light

switch

14

is switched off (left position

“OFF”).

z Information about recycling

and disposal

Don’t throw away – recycle!

Please return this device, accessories

and packaging to your local recycling

depot.

Do not dispose of the automatic welding

helmet in household waste, in ﬁre or in

water. Devices that are no longer functional

should be recycled wherever possible.

Ask your local stockist for advice.

As the consumer you are legally

obliged (by the German Battery

Ordinance) to return any and all

used batteries. Batteries containing harmful

substances are labelled with the adjacent

symbol, which indicates the prohibition on

disposal in household waste. The abbrevia-

tions for the relevant heavy metals are:

Cd = cadmium, Hg = mercury, Pb = lead.

Take used batteries to a waste management

company in your city or community or return

them to your dealer. This satisﬁes your legal

obligations while also making an important

contribution to protecting the environment.

z Meaning of the marking

Safety viewing pane tested in

accordance with DINEN166

(C6316CMC, C6317CMC,

C6318CMC):

• Viewing pane: CMC F CE

CMC = Manufacturer code

F = mechanical resistance

(low-velocity impact at 45 m/s)

CE = CE mark

• Rear lens: CMC 1 F CE

CMC = Manufacturer code

1 = Optical class

F = mechanical resistance

(low-velocity impact at 45 m/s)

CE = CE mark

ADF tested in accordance with

DIN EN 379: 4/5-9/9-13 CMC

1/1/1/2/379 CE (C6313CMC)

Explanation:

4 = light condition

5-9/9-13 = dark conditions

CMC = Manufacturer code

Digit 1 = Optical class

Digit 2 = Scattered light class

Digit 3 = Homogeneity class

Digit 4 = Angle-dependence class

379 = Test standard

CE = CE mark

Welding helmet shell: CMC EN 175 F

CE (C6314CMC, C6315CMC)

Identiﬁcation of the manufacturer: CMC

Number of this standard: EN 175

16 GB

Meaning of the marking / EU Declaration of Conformity

Application area(s) (if required): S, F, B

Mass in grams (if required)

Protection class for the welding helmets

item no.: 2272/2273

CE= CE mark

Sym-

bol

Protection

type

Description of

the application

area

S

Increased

resistance

Mechanical

resistance

F

Low-velocity

impact

Mechanical

resistance

B

Medium-

velocity impact

Mechanical

resistance

If the symbols F, B and S are not

present for either the viewing pane or the

frame, then the complete eye protection

equipment is to be rated at the lower level.

Certiﬁ cation body:

DIN CERTCO Gesellschaft für

Konformitätsbewertung mbH

Alboinstrasse 56

12103 Berlin

Notiﬁ ed body number 0196

z EU Declaration of

Conformity

1. PSA (product, type, batch or serial

number):

Automatic Welding Helmet

IAN: 332014_1907

Serial number:

Black variant 2272

Variant with ﬂ ames 2273

Year of manufacture: 2020/17

Model: PSHL 2 D1

2. Name and address of the manufacturer

and his/her representative, if required:

C.M.C. Creative Marketing &

Consulting GmbH

Responsible for documentation:

Dr Christian Weyler

Katharina-Loth-Str. 15

66386 St. Ingbert

GERMANY

3. The manufacturer is solely responsible for

the creation of the declaration of conformity.

C.M.C. Creative Marketing &

Consulting GmbH

4. The object of the declaration (identiﬁ ca-

tion of the PPE that enables traceability; if

necessary, it can also contain a sufﬁ cient

sharp image if it is necessary for the identiﬁ -

cation of the PPE):

Welder visor

Black variant

PSHL 2 D1, item no. 2272

Rear lens without ﬁ lter effect

PSHL 2 D1, item no.: 2272, 2273

17GB

EU Declaration of Conformity

Viewing pane without ﬁ lter effect

PSHL 2 D1, item no.: 2272

CMC F

Automatic welder protective

ﬁ lter with manually adjustable

protection level PSHL 2 D1,

item no.: 2272, 2273

Welder visor

Variant with ﬂ ames

PSHL 2 D1, item no. 2273

Rear lens without ﬁ lter effect

PSHL 2 D1, item no.: 2272, 2273

Viewing pane without ﬁ lter effect

PSHL 2 D1, item no.: 2273

CMC F

Automatic welder protective

ﬁ lter with manually adjustable

protection level PSHL 2 D1,

item no.: 2272, 2273

5. The object of the declaration described

under number 4 corresponds to the relevant

harmonisation legislation of the union:

General product safety directive

2001 / 95 / EC

Electromagnetic Compatibility

2014 / 30 / EU

RoHS directive

2011 / 65 / EU + 2015 / 863 EU

Personal Protective Equipment –

Ordinance

(EU) / 2016/425

6. Indication of the relevant harmonised

standards used or other technical

HI

LO

AUTO DARKENING

5-9

9-13

SHADE

OFF ON AUTO

LED Control

Mod el: PS HL 2 D 1

SHADE 4/5-9/9-13 CM C 1/1/1/2

EN 3 79 AN SI Z87. 1

Low Bat

Test

HI

LO

AUTO DARKENING

5-9

9-13

SHADE

OFF ON AUTO

LED Control

Mod el: PS HL 2 D 1

SHADE 4/5-9/9-13 CM C 1/1/1/2

EN 3 79 AN SI Z87. 1

Low Bat

Test

18 GB

EU Declaration of Conformity / Warranty and service information

speciﬁcations in relation to which conformity

is declared, including the date of the stand-

ards or other technical speciﬁcations:

EN 166:2001

EN 175:1997

EN 379:2009.

7. The notiﬁed certiﬁcation body DIN

CERTCO Gesellschaft für Konformitätsbewer-

tung mbH, Alboinstrasse 56, 12103 Berlin,

Notiﬁed body number 0196, carried out the

EC type examination and issued the

EC type examination certiﬁcate

C6313CMC/R0, C6314CMC/R0,

C6315CMC/R0, C6316CMC/R0,

C6317CMC/R0, C6318CMC/R0.

St. Ingbert, 01/10/2019

On behalf of Dr Christian Weyler

– Quality Assurance –

z Warranty and service

information

Warranty from Creative

Marketing & Consulting GmbH

Dear Customer,

The warranty for this equipment is 3 years

from the date of purchase. In the event

of product defects, you have legal rights

against the retailer of this product. Your

statutory rights are not affected in any way

by our warranty conditions, which are

described below.

z Warranty conditions

The warranty period begins on the date of

purchase. Please retain the original sales

receipt. This document is required as your

proof of purchase.

Should this product show any defect in mate-

rials or manufacture within 3 years from the

date of purchase, we will repair or replace

it – at our discretion – free of charge.

This warranty service requires that you retain

proof of purchase (sales receipt) for the

defective device for the three year period

and that you brieﬂy explain in writing what

the fault entails and when it occurred.

If the defect is covered by our warranty, we

will repair and return your product or send

you a replacement. The original warranty

period is not extended when a device is

repair or replaced.

z Warranty period and

statutory claims for defects

The warranty period is not extended by the

guarantee. This also applies to replaced

and repaired parts. Any damages or defects

detected at the time of purchase must be

reported immediately after unpacking.

Any incidental repairs after the warranty

period are subject to a fee.

z Extent of warranty

This device has been manufactured accord-

ing to strict quality guidelines and carefully

inspected before delivery.

The warranty applies to material and

manufacturing defects only. This warranty

does not extend to product parts, which are

subject to normal wear and tear and can

thus be regarded as consumable parts, or

for damages to fragile parts, e.g. switches,

19GB

Warranty and service information

rechargeable batteries or parts made

from glass.

This warranty is voided if the product

becomes damaged or is improperly used or

maintained. For proper use of the product,

all of the instructions given in the operating

instructions must be followed precisely. If the

operating instructions advise you or warn

you against certain uses or actions, these

must be avoided in all circumstances.

The product is for consumer use only and is

not intended for commercial or trade use.

The warranty becomes void in the event of

misuse and improper use, use of force, and

any work on the device that has not been

carried out by our authorised service branch.

z Processing of warranty

claims

To ensure prompt processing of your claim,

please follow the instructions given below.

Please retain proof of purchase and the

article number (e.g. IAN) for all inquiries.

The product number can be found on the

type plate, an engraving, the cover page of

your instructions (bottom left), or the sticker

on the back or underside of the device.

In the event of malfunctions or other defects,

please ﬁrst contact our service department

below by phone or email. If your product

is found to be defective, you can then send

your product with proof of purchase (till

receipt) and a statement describing what the

fault involves and when it occurred free of

charge to the service address given.

Note:

You can download this handbook and

many more, as well as product videos and

software at www.lidl-service.com.

With this QR code you can gain imme-

diate access to the Lidl Service page

(www.lidl-service.com) and you can open

your Operating Instructions by entering the

article number (IAN) 332014_1907.

z Service

Only use original spare parts:

Black model

(PSHL 2 D1, item no.: 2272):

• Viewing pane (CMC F CE):

140.4 mm x 156.6 mm x 1.5 mm

• Rear lens (CMC 1F CE):

103.8 mm x 47.3 mm x 1.0 mm

Model with ﬂames

(PSHL 2 D1, item no.: 2273):

• Viewing pane (CMC F CE):

140 mm x 172.3 mm x 1.5 mm

• Rear lens (CMC 1F CE):

103.8 mm x 47.3 mm x 1.0 mm

How to contact us:

GB

Name: C. M. C. GmbH

Website: www.cmc-creative.de

E-mail:

ser[email protected]

Phone: 0-808-189-0652

Registered ofﬁce: Germany

IAN 332014_1907

20 GB

Please note that the following address is not

a service address. Please ﬁrst contact the

service point given above.

Address:

C.M.C. Creative Marketing & Consulting GmbH

Katharina-Loth-Str. 15

66386 St. Ingbert

GERMANY

Ordering spare parts:

www.ersatzteile.cmc-creative.de

Warranty and service information

Stránka sa načítava...

Parkside 332014 1907, PSHL 2 D1 Operation and Safety Notes

Súvisiace články

Ostatné dokumenty