Avent SCD570/00 Používateľská príručka

SCD570

EN User manual 3

BG Ръководствозапотребителя25

CS Příručkaprouživatele 51

ET Kasutusjuhend 74

HR Korisničkipriručnik 96

HU Felhasználóikézikönyv 120

KK Қолданушының нұсқасы 144

LT Vartotojovadovas 169

LV Lietotājarokasgrāmata 192

PL Instrukcjaobsługi 215

RO Manualdeutilizare 238

RU Руководствопользователя 262

SK Príručkaužívateľa 287

SL Uporabniškipriročnik 311

SR Korisničkipriručnik 334

UK Посібниккористувача 357

Table of contents

1 Introduction 3

2 Product overview 4

3 Preparing for use 4

3.1 Babyunit 4

3.2 Parentunit 5

4 Using the baby monitor 6

4.1 Positioningthebabymonitor 6

4.2 Linkingparentunitandbabyunit 7

5 Functions and feedback on the baby

unit 8

5.1 Nightlight 8

5.2 Lullabyfunction 9

5.3 Pagingtheparentunit 9

5.4 Batterystatuslight 10

6 Functions and feedback on the

parent unit 10

6.1 Volume 10

6.2 Talkfunction 11

6.3 Nightdimmode 11

6.4 Babyunitbatterylowalert 12

6.5 Batterystatusindications 12

6.6 Signalstrengthindicator 14

6.7 Reset 14

7 Menu of the parent unit 14

7.1 Navigatingthemenu 14

7.2 Sensitivity 15

7.3 EcoMaxmode 16

7.4 Nightlight 16

7.5 Lullaby 17

7.6 Feedtimer 17

7.7 Temperature 18

7.8 Cryalert 19

7.9 Clock 19

7.10 Language 20

7.11 Keylock 20

8 Neck strap 21

9 Cleaning and maintenance 21

10 Storage 21

11 Ordering accessories 21

12 Guarantee and support 22

13 Frequently asked questions 22

1 Introduction

Congratulations on your purchase and welcome

to Philips AVENT! To fully benet from the

support that Philips AVENT offers, register your

product at www.philips.com/welcome.

Philips AVENT is dedicated to producing

caring, reliable products that give parents the

reassurance they need. This Philips AVENT baby

monitor provides round-the-clock support by

ensuring you can always hear your baby clearly

without any distracting noise. The DECT technology

guarantees zero interference and a crystal clear

sound between the baby unit and the parent unit.

The temperature sensor enables you to monitor

the temperature in your baby’s room, and offers

you personalised settings to help keep your baby’s

room comfortable.

ENGLISH

3

4

• III. Baby unit

1 Nightlight and nightlight on/off button

2 Power-on light

3 FIND button

4 Microphone

5 Next lullaby button

6 Lullaby play/stop button

7 On/off button

8 Volume + button

9 Battery status light

10 Volume - button

11 Temperature sensor

12 Loudspeaker

13 Socket for small plug of adapter

14 Compartment for non-rechargeable

batteries

15 Lid of compartment for non-rechargeable

batteries

16 Small plug of adapter

17 Adapter

3 Preparing for use

IMPORTANT: Read the safety instructions

carefully before you use the baby monitor

and keep them for future reference.

3.1 Baby unit

Use the baby unit from the mains. To guarantee

automatic power backup in case of mains failure,

we advise you to insert non-rechargeable

batteries.

3.1.1 Mains operation

1 Put the adapter in a wall socket and insert the

small appliance plug into the baby unit.

2 Product overview

• I. Display

1 Signal strength indicator

2 Eco Max indicator

3 Night dim mode symbol

4 Cry alert indicator

5 Mute symbol

6 Battery status indicator

7 Navigation arrow

8 Temperature symbol

9 Message eld

10 Microphone sensitivity indicator

11 Nightlight symbol

12 Lullaby symbol

13 Timer or timer repeat symbol

• II. Parent unit

1 On/off button

2 TALK button

3 Night dim button

4 - button

5 Microphone

6 ’link’ light

7 Display

8 Sound level lights

9 MENU button

10 + button

11 Battery status light

12 OK button

13 Handgrip/attachment hole for neck strap

14 Compartment for rechargeable batteries

15 Lid of compartment for rechargeable

batteries

16 Connection points for charging

17 Rechargeable batteries

18 Neck strap

19 Socket for small plug of adapter

20 Charger

21 Small plug of adapter

22 Adapter

5

3 To reattach the lid, rst insert the lugs into the

openings in the rim of the compartment for

non-rechargeable batteries.

4 Then push down the lid until the lock closes

with a click.

3.2 Parent unit

The parent unit runs on two rechargeable

batteries that are supplied with the baby monitor.

3.2.1 Inserting the rechargeable batteries

1 Slide the lid of the compartment for the

rechargeable batteries off the parent unit.

3.1.2 Placing the non-rechargeable batteries

In case of mains failure the baby unit can run on

four 1.5V R6 AA alkaline batteries (not included).

Do not use rechargeable batteries. The baby

unit does not have a charging function and

rechargeable batteries discharge slowly when they

are not in use.

B

Warning:

Unplugthebabyunitandmakesureyourhands

andtheunitaredrywhenyouinsertnon-

rechargeablebatteries.

D

Note:

We advise you to use the baby unit on mains

power, as the baby unit has a limited operating

time when you use it on non-rechargeable alkaline

batteries. The operating time on non-rechargeable

batteries is 24 hours.

1 Push the lock to release the lid of the

compartment for non-rechargeable batteries

and remove the lid.

2 Insert four non-rechargeable batteries.

D

Note:

Make sure the + and - poles point in the right

direction.

ENGLISH

6

2 Put the parent unit in the charger.

• The display goes on and the battery status

indications show that the parent unit is

charging. For battery status indications,

see ‘Battery charge indications’ in chapter

‘Functions and feedback on the parent unit’.

3 Leave the parent unit in the plugged-in

charger until the rechargeable batteries

are fully charged.

D

Note:

When you start using the baby monitor, it takes

four charge and discharge cycles before the

rechargeable batteries reach their full capacity.

4 Using the baby

monitor

4.1 Positioning the baby

monitor

B Warning:

Keepthebabyunitoutofthereachofthebaby.

Neverplacethebabyunitinsidethebaby’sbed

orplaypen.

2 Insert the rechargeable batteries.

D

Note:

Make sure the + and - poles of the batteries

point in the right direction.

3 Slide the lid of the compartment for the

rechargeable batteries back onto the parent

unit. Push the lid home until it locks into place

with a click.

3.2.2 Charging the parent unit

Charge the parent unit before you use it for the

rst time or when the parent unit indicates that

the batteries are low.

Important: You have to charge the parent

unit for the full 10 hours to have a cordless

operating time of 18 hours.

1 Insert the small appliance plug of the adapter

in the socket on the back of the charger. Put

the adapter in a wall socket.

7

2 Press and hold the on/off button 3 on the

parent unit for 2 seconds.

• The display goes on and briey displays all

indicators and symbols. Then the indicators

and symbols fade out and the battery status

indicator appears.

D

Note:

When you switch on the parent unit for

the rst time or after a reset, you have to

select your preferred display language (see

‘Language’ in chapter ‘Menu of the parent

unit’).

• The ‘link’ light on the parent unit starts

ashing red and the message ‘I AM

LINKING’ appears on the display.

1 Because the cord of the baby unit presents

a potential strangulation hazard, make sure

that the baby unit and its cord are at least 1

metre/3.5 feet away from your baby.

2 To prevent a high-pitched sound from one

or both units, make sure the parent unit is at

least 1 metre/3.5 feet away from the baby

unit.

4.2 Linking parent unit and

baby unit

1 Press and hold the on/off button 3 on the

baby unit for 2 seconds.

• The nightlight, the battery status light and

the power-on light go on briey.

ENGLISH

8

4.2.1 Operating range

• The operating range is 330 metres/1000

feet outdoors and up to 50 metres/150 feet

indoors.

• The operating range of the baby monitor

varies depending on the surroundings and

factors that cause interference. Wet and moist

materials cause so much interference that

the range loss is up to 100%. For interference

from dry materials, see table below

Dry materials Material

thickness

Loss of

range

Wood, plaster, cardboard,

glass (without metal,

wires or lead)

< 30cm

(12in)

0-10%

Brick, plywood < 30cm

(12in)

5-35%

Reinforced concrete < 30cm

(12in)

30-100%

Metal grilles or bars < 1cm

(0.4in)

90-100%

Metal or aluminium

sheets

< 1cm

(0.4in)

100%

5 Functions and

feedback on the

baby unit

5.1 Nightlight

The nightlight produces a soft glow that comforts

your baby.

1 Press the nightlight on/off button on the baby

unit to switch on the nightlight.

• When the parent unit and baby unit are

linked, the ‘link’ light turns solid green. The

signal strength indicator and the message

‘LINKED’ appear on the display.

• If no connection is established within

10 seconds, the message ‘NOT LINKED’ on

the display alternates with ‘I AM LINKING’.

If still no connection is established after

30 seconds, the parent unit starts to beep

and only the message ‘NOT LINKED’ is

shown.

What to do if no link is established

• The parent unit may be out of range of

the baby unit. Place the parent unit closer

to the baby unit, but not closer than

1 metre/3.5 feet.

• The baby unit or the parent unit may

lose connection because it is too close to

another DECT appliance (e.g. a cordless

phone). Switch off this DECT appliance

or place the unit further away from this

appliance.

• The baby unit may be switched off. Switch

on the baby unit.

9

3 To adjust the sound level of the lullaby, press

the volume + or the volume – button on the

baby unit.

D

Note:

You can only set the loudspeaker volume on the

baby unit when a lullaby is playing. If you have set

the volume for the lullaby higher on the baby

unit, the sound will also be louder when you use

the talk function on the parent unit.

4 To stop lullaby playing, press the lullaby play/

stop button K on the baby unit.

5.3 Paging the parent unit

If you have lost the parent unit, you can use the

FIND button on the baby unit to locate the

parent unit.

D

Note:

The paging function only works when the parent

unit is switched on.

1 Press the FIND button on the baby unit.

• Q appears on the display of the parent unit.

2 Press the nightlight on/off button again to

switch off the nightlight.

• The nightlight dims gradually before it goes

out completely.

• Q disappears from the display of the parent

unit.

5.2 Lullaby function

1 Press the lullaby play/stop button K on the

baby unit to play the last selected lullaby.

• The selected lullaby repeats for 15 minutes.

• If no lullaby was selected before, lullaby

1 is played.

2 Press the next lullaby button to select

another lullaby from the list.

• If no lullaby is playing, the last selected

lullaby starts playing when you press the

next lullaby button

.

• When you press the next lullaby button

while a lullaby is playing, the next lullaby

starts playing.

ENGLISH

10

• Replace the batteries when they run low.

• If the batteries run out of power while the

baby unit is running on battery power, the

baby unit switches off and the parent unit

loses connection with the baby unit.

D

Note:

We advise you to use the baby unit on mains

power, as the baby unit has a limited operating

time when you use it on non-rechargeable alkaline

batteries. The operating time on non-rechargeable

batteries is 24 hours.

6 Functions and

feedback on the

parent unit

6.1 Volume

The volume can be set if the menu is not active.

There are seven volume levels and a ‘volume off’

setting.

6.1.1 Setting the volume level

1 Press the + button or the - button once.

• The current volume level appears on the

display.

2 Press the + button to increase the volume or

press the - button to decrease the volume.

• The parent unit beeps at every volume step

• At maximum volume, the parent unit gives

two beeps.

• The message ‘PAGING’ appears on the

display of the parent unit and the parent

unit produces a paging alert tone.

2 To stop the paging alert tone, press the FIND

button on the baby unit again or press any

button on the parent unit.

D

Note:

The paging alert tone stops automatically after

2 minutes.

5.4 Battery status light

1 The battery status light is solid green when

the baby unit runs on battery power and the

batteries contain enough energy.

2 The battery status light ashes red quickly

when the batteries run low while the baby

unit is running on battery power.

11

D Note:

If you have set the volume for the lullaby

higher on the baby unit, the sound will also be

louder when you use the talk function on the

parent unit.

• The ‘link’ light starts ashing green and the

message ‘TALK’ appears on the display.

2 Release the TALK button when you have

nished talking.

6.3 Night dim mode

In night dim mode, the light intensity of the lights

and the display is reduced and the volume of alert

sounds is decreased.

1 Press the night dim button to activate the

night dim mode.

• The night dim mode symbol appears on the

display.

• The sound level lights and the link light are

dimmed.

• The backlight of the display is dimmed.

• The volume of any sound alerts set on the

parent unit is reduced.

• If no button is pressed for more than

2 seconds, the volume level indication

disappears and the volume setting is saved.

6.1.2 Volume off

Below the lowest volume setting, there is a

‘volume off’ setting.

1 Press the + button or the - button once.

• The current volume level appears on the

display.

2 Press and hold the - button for more than

2 seconds to set the volume to off.

• The message ‘MUTE’ and the mute symbol

appear on the display.

D

Note:

If the volume is off, only the sound level

lights show that the baby produces

sounds.

6.2 Talk function

You can use the TALK button on the parent unit

to talk to your baby (e.g. to comfort your baby).

1 Press and hold the TALK button and talk

clearly into the microphone on the front of

the parent unit from a distance of 15-30cm

(0.5-1ft).

ENGLISH

12

6.5 Battery status indications

The battery charge status is indicated on the

display by the battery status indicator and by text

messages.

6.5.1 Battery low

When the rechargeable batteries are low, the

remaining operating time is at least 30 minutes if

the baby monitor works in normal mode at the

highest settings.

1 The battery status indicator on the display is

empty and ashes.

2 The message ‘BATTERY LOW’ appears on the

display.

3 The battery status light ashes red slowly.

4 The parent unit beeps every 10 seconds in

the rst 3 minutes. Then it continues to beep

every minute.

6.5.2 Battery empty

1 If the rechargeable batteries are almost empty,

the battery status light ashes red quickly.

2 If you do not place the parent unit in the

charger and connect the charger to the mains,

the following happens in succession:

1 The link with the baby unit is lost.

2 The display goes out.

3 The parent unit switches off.

2 To switch back to normal operating mode,

press the night dim button again.

• The night dim mode symbol disappears

from the display.

• The sound level lights and the link light

return to their normal brightness.

• The backlight of the display lights up fully

again.

• The sound alerts go off at the normal sound

level.

6.4 Baby unit battery low alert

1 When the baby unit runs on battery power

and its batteries are low, the parent unit gives

the following signals:

• The text ‘BABY UNIT’ appears on the rst

line of the message eld in the display.

• The message ‘Change batteries’ scrolls

across the screen on the second line.

• The parent unit beeps every 10 seconds

during the rst 3 minutes. After these

3 minutes, the parent unit beeps every

minute.

2 When you do not replace the batteries in

time, the link with the baby unit will be lost.

• The message ‘Not linked’ alternates with the

message ‘Change batteries’ on the second

line of the message eld.

D

Note:

If both the batteries of the parent unit

and the baby unit run low at the same

time, rst the battery low message of the

parent unit is shown on the display. When

the parent unit is charged, the battery low

message of the baby unit appears on the

parent unit display.

13

6 When the rechargeable batteries are full, the

following happens:

• The third segment in the battery status

indicator stops ashing.

• The display goes on for 4 seconds and the

message ‘BATTERY FULL’ appears on the

display.

7 Disconnect the charger and take the parent

unit out of the charger.

• The battery status light goes off. The

parent unit is now ready for cordless use.

D

Note:

You can charge the parent unit when it is

switched off. In that case, the display is off. The

battery status light is on, but does not indicate

the charging status. This light remains on and solid

green as long as the parent unit is connected to

the mains.

D

Note:

If the rechargeable batteries run low very quickly,

they have reached the end of their life and you

have to replace them. To order new rechargeable

batteries, see chapter ‘Ordering accessories’.

D Note:

If you switch on the parent unit when its

rechargeable batteries are almost empty, the

display goes on. The message ‘BATTERY LOW’

appears on the display for 2 seconds before the

parent unit switches off.

6.5.3 Charging

Insert the small plug into the charger and put the

adapter in a wall socket. Place the parent unit in

the charger. When the parent unit charges, the

following happens in succession:

1 The display goes on for 4 seconds and the

text ‘CHARGING’ appears on the screen for

2 seconds.

2 The battery status light is solid green when

the parent unit is connected to the mains.

3 The rst segment in the battery status

indicator starts ashing to indicate that the

rechargeable batteries are charging.

4 The second segment in the battery status

indicator starts ashing when the rechargeable

batteries are charged to more than 30% of

their capacity.

5 The third segment in the battery status

indicator starts ashing when the rechargeable

batteries are charged to more than 50% of

their capacity.

ENGLISH

14

• ‘Temperature low’ alert: 14°C (57°F)

• ’Temperature high’ alert: 35°C (95°F)

• Temperature scale: Celsius

• Eco Max mode: off

• Feed timer: 02:00

• Feed timer: Stop

• Vibration alert: off

• Cry alert vibration: off

• Clock: hidden

Baby unit

• Loudspeaker volume: 4

• Nightlight: off

• Lullaby: off (lullaby 1 selected)

7 Menu of the parent

unit

All functions described in the following sections

can be operated through the menu of the parent

unit.

7.1 Navigating the menu

D Note:

Some menu functions only work when the baby

unit and the parent unit are linked.

1 Press the MENU button to open the menu.

• The rst menu option appears on the

display.

2 Use the + button to go to the next option or

the - button to go to the previous option.

6.6 Signal strength indicator

6.6.1 In Smart Eco mode

Smart Eco mode is the standard operating mode.

In this mode, the strength of the DECT signal

depends on the distance between the baby unit

and the parent unit.

• If the signal strength indicator has 4 bars, the

connection between the baby unit and the

parent unit is excellent.

• If the signal strength indicator has 1 bar or no

bar at all, the signal from the baby unit is very

weak or not available. Take the parent unit

closer to the baby unit to get a better signal.

6.6.2 In Eco Max mode

In this mode the DECT signal from the baby unit

to the parent unit is switched off.

• The signal strength indicator has no bar at all

when the DECT signal is off, even when the

parent unit is within range of the baby unit.

• When the baby unit starts to transmit a

DECT signal because the baby is making a

sound, the display goes on and the signal

strength indicator shows the quality of the

connection between baby unit and parent

unit.

• For more information on the Eco Max mode,

see ‘Eco Max mode’ in chapter ‘Menu of the

parent unit’.

6.7 Reset

This function allows you to reset the parent unit

and the baby unit to the factory default settings.

1 Switch off the unit.

2 Press and hold the - button.

3 Switch on the unit again while holding the -

button.

6.7.1 Default settings

Parent unit

• Language: English

• Loudspeaker volume: 3

• Microphone sensitivity: 3

• Night dim mode: off

• Temperature alert: off

15

• If all segments are empty, the sensitivity is

at its lowest.

3 Press OK to conrm the setting.

7.2.1 Sensitivity levels and indications

Icon Sensitivity Description

highest Hear everything from your

baby. The speaker of the par-

ent unit is continuously on.

high Hear all sounds from soft

babbling and louder. If your

baby does not make any

sound, the speaker of the

parent unit is off.

medium Hear sounds from soft cries

and louder. If your baby

makes softer sounds, the

speaker of the parent unit

does not go on.

low The speaker of the parent

unit only goes on if the

baby makes loud sounds, for

instance because it is crying.

D Note:

The arrow on the display indicates in which

direction you can navigate.

3 Press the OK button to conrm your

selection.

D

Note:

Press the MENU button if you want to leave the

menu without making any changes. If there is no

input in the menu for more than 20 seconds, the

menu closes automatically.

7.2 Sensitivity

This option in the parent unit menu allows you to

set the microphone sensitivity on the baby unit.

The microphone sensitivity determines what noise

level the baby unit picks up, e.g. you will want to

hear when your baby cries, but you may be less

interested in its babbling.

1 Select ‘Sensitivity’ in the menu with the + and

- buttons and press OK to conrm.

2 Use the + and - buttons to increase or

decrease the microphone sensitivity. The

sensitivity indication on the display has four

segments.

• If all four segments are lled, the sensitivity

is at its highest level.

ENGLISH

16

7.3.2 Activating Eco Max mode

1 Select ‘Eco Max’ in the menu with the + and -

buttons and press OK to conrm.

2 When the display shows ‘Turn On’, press OK

to switch on the Eco Max mode.

3 The warning message ‘!No alert if out of

range, OK?’ appears on the display. Press OK

to conrm.

D

Note:

The warning message scrolls across the display

twice. If you do not press OK, the parent

unit leaves the menu and the Eco Max mode

remains off.

• The Eco Max indication ashes on the

display and the ‘link’ light ashes green

slowly.

• When the parent unit receives a DECT

signal from the baby unit because the baby

makes a sound, the ‘link’ light turns solid

green again.

7.3.3 Deactivating Eco Max mode

1 Press the MENU button

2 Use the + and - buttons to select ‘Eco Max’

and press OK to conrm.

3 Use the + and - buttons to select ‘Turn Off’

and press OK to conrm.

7.4 Nightlight

This option in the parent unit menu allows you to

switch the nightlight on the baby unit on and off.

1 Select ‘Nightlight’ in the menu with the + and

- buttons and press OK to conrm.

2 Use the + and - buttons to choose ‘Turn On’.

• The nightlight symbol Q appears on the

display.

7.3 Eco Max mode

This baby monitor has a built-in Smart Eco mode

that automatically reduces the DECT signal from

the baby unit as the distance between parent unit

and baby unit becomes shorter. By reducing radio

transmission, it helps to save energy.

If you want to save even more energy and to stop

radio transmission, activate the Eco Max mode

in the menu of the parent unit. In this mode, the

DECT signal of the baby unit is switched off. As

soon as the baby makes a sound, the DECT signal

of the baby unit automatically switches on again.

C

Caution:

InEcoMaxmode,theparentunitreceives

feedbackfromthebabyunitwithadelay.When

yourbabymakesasound,thebabyunitrsthas

toreactivateradiotransmissionbeforeitcan

sendfeedbacktotheparentunit.

7.3.1 Please note the following:

• Before you select Eco Max mode, make sure

that the parent unit and baby unit are within

operating range, see section ‘Operating range’

in chapter ‘Using the baby monitor’. In Eco

Max mode you do not receive feedback when

the parent unit is out of range of the baby

unit. You can check the link by pressing any

button on the parent unit.

• If there is no radio transmission from the baby

unit to the parent unit in Eco Max mode, the

sound level lights on the parent unit are off.

The sound level lights go on when the baby

unit reactivates radio transmission because

the baby makes a sound above the selected

sensitivity level.

• If you want to operate the baby monitor in

Eco Max mode, make sure that the sensitivity

level is set between 1 and 3. If the sensitivity

level is set to level 4, the baby unit does not

switch off radio transmission in Eco Max

mode.

17

7.5.2 Stopping lullaby playing

1 Press the MENU button and select ‘lullaby’.

2 Use the + and - buttons to select ‘Stop’ and

press OK to conrm.

7.6 Feed timer

You can set the feed timer to alert you that it is

time to feed your baby. The timer can be set from

1 minute to 23 hours and 59 minutes.

7.6.1 Setting and using the feed timer

1 Select ‘Feed Timer’ in the menu with the +

and - buttons and press OK to conrm.

2 Select ‘Set Timer’ with the + and - buttons.

Press OK to start setting the timer.

• The hour indication starts ashing on the

display.

3 Set the hour and press OK to conrm.

• The minutes indication starts ashing on the

display.

4 Set the minutes and press OK to conrm.

5 Select ‘xx:xx Start’ with the + and - buttons.

Press OK to conrm.

• The timer symbol appears on the display.

• The timer starts counting down.

6 When the timer has reached 00:00, the feed

timer alert goes off, the timer symbol starts

ashing on the display and the message

‘TIMER END’ scrolls across the display.

3 When the nightlight is on and you want

to switch it off, use the + and - buttons to

choose ‘Turn Off’.

• The nightlight symbol Q disappears from

the display.

7.5 Lullaby

This option in the parent unit menu allows you

to choose and play one or more lullabies on the

baby unit and also to stop playing lullabies.

7.5.1 Selecting a lullaby

1 Select ‘Lullaby’ in the menu with the + and -

buttons.

2 Press OK to conrm.

• Press OK again to play the rst lullaby.

• Use the + and - buttons to select one of

the ve lullabies or ‘Play all’.

• The display shows the lullaby symbol

and the number of the lullaby that is

playing.

• The selected lullaby repeats continuously

for 15 minutes, unless you use the + and -

buttons to select ‘stop’ in the menu.

• If you select ‘Play all’, all pre-stored lullabies

are played for 15 minutes. The display shows

the number of the lullaby that is playing.

ENGLISH

18

7.6.4 Stopping the timer

1 Press the menu button and select ‘Feed Timer’.

2 Use the + and - buttons to select ‘Stop &

Reset’ and press OK to conrm.

7.7 Temperature

A baby sleeps comfortably at a temperature range

between 16°C/61°F and 20°C/68°F. You can set

a minimum and maximum temperature range

and an alert to warn you that the temperature is

outside the set minimum and maximum range.

1 Select ‘Temperature’ in the menu with the +

and - buttons. Press OK to conrm.

2 Select ‘Temp Range’ with the + and - buttons

and press OK to conrm.

• The minimum temperature indication starts

ashing on the display.

3 Use the + and - buttons to set the minimum

temperature range between 10°C/50°F and

19°C/66°F. Press OK to conrm.

• The maximum temperature indication starts

ashing on the display.

4 Use the + and - buttons to set the

maximum temperature range between

22°C/72°F and 37°C/99°F. Press OK to

conrm.

5 Select ‘Alert’ with the + and - buttons. Press

OK to conrm and to start setting the

temperature alert options.

6 Use the + and - buttons to select one of the

alert options. The options available are sound

only, sound and vibration, vibration only and

display only. Press OK to conrm.

• After you have conrmed your choice of the

alert option, the temperature alert symbol

appears on the display.

7 Select ‘Temp Scale’ with the + and - buttons.

Press OK to conrm and to start setting the

temperature scale.

8 Select ‘Celsius’ or ‘Fahrenheit’ and press OK to

conrm.

• The temperature in the set scale appears

on the display. If the temperature is within

the set range, the temperature alert symbol

has two segments.

7 Press any key to stop the alert. If you do not

stop the alert, it stops automatically after 2

minutes.

7.6.2 Setting the feed timer alert

1 After step 5 in ‘Setting and using the feed

timer’, select ‘Timer Alert’ with the + and -

buttons. Press OK to conrm.

2 Use the + and - buttons to choose one of the

alert options. The options available are sound

only, sound and vibration and vibration only.

Press OK to conrm.

3 Select ‘xx:xx Start’ with the + and - buttons

and press OK to activate the feed timer

function.

4 When the feed timer alert goes off, press any

key to stop the feed timer and the feed timer

alert.

7.6.3 Repeat the feed timer

1 After step 5 in ‘Setting and using the feed

timer’ or after setting the feed timer alert,

select ‘Timer repeat’ with the + and - buttons.

Press OK to conrm.

2 Choose ‘Repeat ON’ or ‘Repeat OFF’ and

press OK to conrm.

3 Select ‘xx:xx Start’ with the + and - buttons

and press OK to activate the feed timer

repeat function.

• Instead of the normal timer symbol, the

timer repeat on symbol appears on the

display.

4 When you press any key to stop the feed

timer alert or if the alert stops automatically

after 2 minutes, the feed timer starts counting

down again.

19

• The cry alert indicator appears on the

display.

• The cry alert goes off when the sound in

the baby room is loud enough to make the

fourth sound level light go on. The parent

unit vibrates and the message ‘Cry alert’

appears on the display for 4 seconds. The

cry alert repeats every 8 seconds until the

sound becomes less loud or you deactivate

the cry alert.

3 To deactivate the cry alert, select ‘Cry alert’ in

the menu and select ‘Vibration OFF’ with the

+ and - buttons.

7.9 Clock

The default setting for the clock is hidden. You can

choose to show the clock and set the clock time

in the menu of the parent unit.

1 Select ‘Set clock’ in the menu with the + and -

buttons and press OK to conrm.

2 Use the + or - button to select ‘Show Time’

and press OK to conrm.

3 Select ‘Set the time’ with the + and - buttons.

Press OK to conrm and to start setting the

clock.

• The hour indication starts ashing on the

display.

• If the temperature is below the set range,

the temperature alert symbol on the

display has only one segment and ashes.

The message ‘TOO COLD’ appears on the

display.

• If the temperature is above the set range,

the temperature alert symbol on the

display has three segments and ashes. The

message ‘TOO HOT’ appears on the display.

7.8 Cry alert

You can set a cry alert to warn you that the baby

is crying.

1 Select ‘Cry alert’ in the menu with the + and -

buttons and press OK to conrm.

2 Select ‘Vibration ON’ with the + and -

buttons. Press OK to conrm.

ENGLISH

20

2 Press the + button within 2 seconds.

D

Note:

If you do not press the + button within

2 seconds, the instruction remains on the display.

• After you have pressed the + button,

the message ‘Keys locked’ appears on

the display instead of the temperature

indication.

3 To deactivate the key lock, press OK. When

the display shows the instruction message,

press the + button within 2 seconds.

D

Note:

If you do not press the + button within

2 seconds, the message ‘Key locked’ remains

on the display.

7.11.1 Notes

• When you press a button other than OK

while the key lock is active, the display goes

on and the second line on the display tells you

how to deactivate the key lock.

• When you press OK while the key lock is

active, the second line on the display tells you

what second step is necessary to unlock the

buttons.

4 Set the hour and press OK to conrm.

• The minutes indication starts ashing on the

display.

5 Set the minutes and press OK to conrm.

• The clock time alternates with other

indications in the message eld of the

display.

7.10 Language

You can use this menu option to change the

language setting.

1 Select ‘Set language’ in the menu with the

+ and - buttons and press OK to conrm.

2 Use the + and - buttons to select your

language and press OK to conrm.

D

Note:

This option automatically appears on the

display when you switch on the parent unit

for the rst time and after a reset.

7.11 Key lock

You can activate the key lock to prevent the

buttons from being pressed accidentally while you

carry the parent unit around.

1 To activate the key lock, press OK.

• The instruction to press + appears on the

display.

Stránka sa načítava...

Avent SCD570/00 Používateľská príručka

Avent SCD570/00 Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty