ULTIMATE SPEED 290923 Original Instructions Manual

IAN 290923

CAR CHARGER

WITH STARTER FUNCTION ULG 12 B3

KFZ-LADEGERÄT MIT STARTHILFE-

FUNKTION ULG 12 B

3

DE

HU

CZ

CAR CHARGER WITH STARTER

FUNCTION ULG 12 B3

Operation and Safety Notes

Translation of the original instructions

GB

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung

HU

SK

GB

CZ

SI

DE

SZEMÉLYGÉPJÁRMŰ AKKUMULÁ-

TORTÖLTŐ BERENDEZÉS INDÍTÁSI

SEGÉD FUNKCIÓVAL ULG 12 B3

AUTONABÍJEČKA S FUNKCÍ

POMOCNÉHO STARTU ULG 12 B3

Kezelési és biztonsági hivatkozások

Az eredeti használati utasítás fordítása

Návod k obsluze a bezpečnostní pokyny

Originální návod k obsluze

Návod na obsluhu a bezpečnostné upozornenia

Originálny návod na obsluhu

Navodila za upravljanje in varnostna opozorila

Prevod originalnega navodila za uporabo

NABÍJAČKA AUTOBATÉRIÍ S FUNKCIOU

POMOCNÉHO ŠTARTOVANIA ULG 12 B3

SK

POLNILNIK ZA MOTORNA VOZILA

S FUNKCIJO POMOČI PRI ZAGONU

ULG 12 B3

SI

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

GB

DE

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit

allen Funktionen des Gerätes vertraut.

GB Operation and Safety Notes Page 5

HU Kezelési és biztonsági hivatkozások Oldal 17

SI Navodila za upravljanje in varnostna opozorila Stran 31

CZ Návod k obsluze a bezpečnostní pokyny Strana 43

SK Návod na obsluhu a bezpečnostné upozornenia Strana 55

DE Bedienungs- und Sicherheitshinweise Seite 67

Olvasás előtt hajtsa ki az ábrát tartalmazó oldalt, és ezután ismerje meg a készülék mindegyik

funkcióját.

Než začnete číst tento návod k obsluze, rozložte stránku s obrázky a seznamte se se všemi funkcemi

zařízení.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Prv než začnete čítať tento návod, rozložte si stranu s obrázkami a potom sa oboznámte so všetkými

funkciami zariadenia.

HU

CZ

SI

SK

A

1

2

3

4

6

5

8

7

Table of contents

GB

5

Introduction ...........................................................................................................Page 6

Intended use ............................................................................................................... Page 6

Parts description .......................................................................................................... Page 7

Technical specifications ................................................................................................ Page 7

Delivery contents ......................................................................................................... Page 7

Safety notes .......................................................................................................... Page 7

Operation ............................................................................................................... Page 10

Product properties ........................................................................................................ Page 10

Connection ................................................................................................................. Page 10

Disconnecting ............................................................................................................. Page 11

Choosing the charging mode ........................................................................................ Page 11

Using the jump-start function.......................................................................................... Page 12

Replacing the fuse ....................................................................................................... Page 13

Maintenance and care ..................................................................................... Page 13

Warranty and service information ............................................................ Page 13

Warranty conditions.....................................................................................................Page 13

Extent of warranty ........................................................................................................ Page 13

Processing of warranty claims ....................................................................................... Page 14

Environmental notes and disposal information ..................................Page 14

Declaration of conformity ..................................................................................... Page 15

GB

6

Car charger with

starter function ULG 12 B3



Introduction

Congratulations!

You have purchased one of our

high-quality products.

Before initial setup, please familiarize yourself with

the product. Read the following original operat-

ing and safety instructions carefully. Only trained

persons may set up this product.

 Intended use

The Ultimate Speed ULG 12 B3 is a car charger

with pulse maintenance charge (chip software),

used for charging and maintenance charging and

suitable for the following 6 V or 12 V-lead batteries

(batteries) with electrolyte solution, AGM batteries,

acid-lead batteries, deep cycle (boat batteries) or

gel batteries:

• For car and motorcycle batteries with

12 V/6 V and 8–180 Ah capacity

You can also regenerate discharged batteries

(depending on the battery type). The car charger

has a safety circuit against sparking and over-

heating. Any non-intended or improper use causes

loss of warranty. The manufacturer assumes no

liability for damage resulting from non-intended

use. The device is not intended for commercial use.

Note: The car charger cannot charge any electri-

cal vehicles with integrated rechargeable battery.

Introduction

The following icons are used in this original operating manual/at the device:

Read the operating instructions of this

product attentively and completely

before use.

Read the operating manual of this

product attentively and completely

before using it.

NOTE: This symbol indicates addi-

tional information and explanations

on the product and its use.

Caution! Possible dangers!

Caution! Danger of explosion!

Caution! Danger of electric shock!

Protection type: Protected from

solid foreign bodies with diameter

≥ 12.5 mm, protected from access

with a finger; no protection from

water.

Dispose of batteries at the intended

battery collection points.

Suitable for lead-acid battery:

8Ah - 180Ah.

Do not dispose of electrical devices

in the household waste!

Only for use in closed, ventilated

rooms!

~50Hz

Alternating voltage at a frequency

of 50Hz.

I

GB

7

Introduction / Safety notes

 Parts description

Digital display button

Battery type button

Charge start button

Fuse with cover

"+" pole connection cable (red)

"–" pole connection cable (black)

Mains cable

Digital display

 Technical specifications

Input voltage: 230 V~ 50 Hz

Return current*:

< 5 mA (no AC input)

Nominal output voltage: 6 V/12 V

Charge current: 2 A, 6 A, 12 A ± 10%

Battery type with: 12 V/6 V and

8–180 Ah capacity

Housing protection type: IP 20

* = Return current means the current that the char-

ger consumes from the battery when no mains

current is connected.

 Delivery contents

Check the scope of delivery and the

device as well as all parts for damage

right after unpacking. Do not take a

defective unit or parts into operation.

1 Charger Ultimate Speed ULG 12 B3

2 Quick contact connection terminals

(1 red, 1 black)

1 original operating instructions

Safety notes

KEEP OUT OF THE REACH

OF CHILDREN!

 DANGER! Avoid danger to

life and danger of injury from

improper use!

 CAUTION! Do not operate the

device with a damaged cable,

mains cable or mains plug.

Damaged mains cables pose

danger to life from electric shock.

 Have the mains cable only re-

paired by authorized and trained

specialists if there is any damage!

Contact the service point of your

country if you need any repair!

 DANGER OF ELECTRIC

SHOCK! Ensure that the

vehicle is not in operation if the

battery is installed firmly in the

vehicle! Switch off the ignition and

put the vehicle into the parking

position, with the parking brake

engaged (e.g. car) or the rope

attached (e.g. electrical robot)!

 DANGER OF ELECTRIC

SHOCK! Disconnect

the car charger from the mains

before removing the connection

terminals.

 Connect the connection terminal

that is not connected to the car

body first.

 Connect the other connection ter-

minal to the car body away from

the battery and the gasoline line.

 Connect the car charger to the

supply grid only thereafter.

2

1

3

4

5

6

7

8

GB

8

Safety notes

 Disconnect the car charger from

the supply grid after charging.

 Only then disconnect the connec-

tion terminal from the car body.

Then disconnect the connection

terminal from the battery.

 DANGER OF ELECTRIC

SHOCK! Only touch

the pole connection cables ("–"

and "+") in the insulated area!

 DANGER OF ELECTRIC

SHOCK! Conduct the

connection to the battery

and the socket of the mains grid

completely protected from moisture!

 DANGER OF ELECTRIC

SHOCK! Perform installa

-

tion, servicing and maintenance

of the car charger only when the

mains current is not connected!

 DANGER OF ELECTRIC

SHOCK! Disconnect the

minus pole connection cable

(black) of the car charger from

the minus pole of the battery first

after completing charging and

maintenance charging if the

battery is continually connected

in the vehicle.

 Do not leave any toddlers or

children unsupervised around

the car charger!

 Children cannot assess possible

dangers in use of electrical

devices. Children must be super-

vised to ensure that they do not

play with the device.

 This device may be used by

persons with reduced physical,

sensory or mental abilities or a

lack of experience and knowledge

if they are supervised or have

been instructed about safe use

of the device and understand the

resulting dangers. Do not allow

children to play with the product.

Cleaning and user maintenance

must not be performed by children

without supervision.

 EXPLOSION HAZARD!

Protect yourself from

highly explosive oxyhydrogen

reactions! Gaseous hydrogen can

escape during charging or mainte

-

nance charging of the battery.

Oxyhydrogen is a potentially

explosive mix of gaseous hydrogen

and oxygen. The oxyhydrogen

reaction occurs at contact with

open fire (flames, smouldering or

sparks)! Perform charging and

maintenance charging in a

weather-protected space that is

ventilated well. Ensure that there

are no open light (flames, smoul

-

dering or sparks) during charging

or maintenance charging!

 EXPLOSION AND FIRE

HAZARDS! Ensure that explosive

or flammable substances, such

GB

9

Safety notes

as gasoline or solvents cannot be

ignited when you are using the

car charger!

 EXPLOSIVE GASES! Avoid

flames and sparks!

 Ensure sufficient ventilation when

charging.

 Put the battery onto a well-

ventilated surface when charging.

Otherwise, the device can be

damaged.

 EXPLOSION HAZARD!

Ensure that the plus-pole

connection cable has no contact

with a fuel line (e.g. gasoline line)!

 DANGER OF CAUSTIC

BURNS! Protect your eyes

and skin from caustic burns from

the acid (sulphuric acid) when it

comes into contact with the battery!

 Use: acid-resistant goggles,

clothing and gloves! If your eyes

or skin have come into contract

with the sulphuric acid, flush the

affected body region with plenty

of running, clear water and seek

medical advice at once!

 Avoid electrical short circuit when

connecting the car charger to the

battery. Connect the minus pole

connection cable only to the

minus pole of the battery or the

car body. Connect the plus pole

connection cable only to the plus

pole of the battery!

 Before connecting the mains

current, ensure that the mains

current is equipped properly with

230 V~ 50 Hz, an earthed zero

conductor, a 16 A fuse and an

FI-switch (fault-circuit interrupter)!

Otherwise, the device can be

damaged.

 Do not use the car charger near

any fires, heat and long-term

temperatures above 50 °C! For

higher temperatures, the output

power of the car charger will

drop automatically.

 Use the car charger only

with the original parts it was

delivered with!

 Do not cover the car charger

with any objects! Otherwise, the

device can be damaged.

 Protect the electrical contact

surfaces of the battery from

short circuit!

 Use the car charger only for

charging and maintenance

charging of undamaged

6 V-/12 V-lead batteries

(with electrolyte solution or gel)!

Otherwise, property damage

may be the consequence.

 Do not use the car charger for

charging and maintenance

charging of non-rechargeable

batteries. Otherwise, property

damage may be the consequence.

GB

10

 Do not use the car charger for

charging and maintenance

charging of damaged or frozen

batteries! Otherwise, property

damage may be the consequence.

 Learn about the maintenance

of your battery in its original

operating instructions before con-

necting the charger! Otherwise,

there is a danger of injury and/or

the risk of damage to the device.

 Before connecting the charger to

a battery that is continually con

-

nected to the vehicle, learn about

compliance with the electrical

safety and maintenance in the

original operating instructions of

the vehicle! Otherwise, there is

a danger of injury and/or the

risk of property damage.

 Disconnect the car charger from

the mains current when it is not

is use to protect the environment

as well! Note that power is

consumed in standby operation

as well.

 Always pay attention and observe

what you are doing. Proceed

reasonably and do not take the

car charger into operation

when you are not focused or

not feeling well.



Operation

Always pull the mains plug from the

socket before you perform any work at

the car charger.

DANGER OF ELECTRIC SHOCK!

DANGER OF PROPERTY DAMAGE!

DANGER OF INJURY!

 Product properties

This device is designed for charging many SLA

batteries (sealed lead-acid batteries), which are

mostly used in cars, motorcycles and some other

vehicles. They can be, e.g., WET (with liquid elec-

trolyte), GEL (with electrolyte gel) or AGM batteries

(with electrolyte-absorbent mats). A special design

of the device (also called a "three-stage charging

strategy") permits recharging of the battery to

nearly 100% of its capacity. The battery may also

be connected to the car charger permanently in

order to keep it in optimal condition at all times.

 Connection

 Disconnect the minus pole connection cable

(black) of the vehicle from the minus pole of the

battery first before charging and maintenance

charging if the battery is continually connected

in the vehicle. The minus pole of your battery

is usually connected to the car body of the

vehicle.

 Then disconnect the plus pole connection cable

(red) of the vehicle from the plus pole of the

battery.

 Only then connect the "+" pole quick contact

connection terminals (red)

5

of the car

charger to the "+"-pole of the battery.

 Connect the "–"-pole quick contact-connection

terminal (black)

6

to the "–"-pole of the

battery. Connect the mains cable

7

of the

car charger to the socket.

Safety notes / Operation

GB

11

Operation

Note: If the connection terminals are connected

correctly, the display indicates the voltage and

the display "connected" lights up. If polarity is

reversed, the display shows 0.0 and the display

"connected" does not light up.

 Disconnecting

 Disconnect the device from the mains current.

 Disconnect the "–"-pole quick contact-connec-

tion terminal (black)

6

from the "–"-pole of

the battery.

 Disconnect the "+"-pole quick contact-connec-

tion terminal (red)

5

from the "+"-pole of

the battery.

 Reconnect the plus pole connection cable of

the battery to the plus pole of the battery.

 Reconnect the minus pole connection cable of

the battery to the minus pole of the battery.

 Choosing the charging

mode

You can choose from different charging modes for

charging different batteries at different ambiance

temperatures. As compared to conventional car

chargers, this device has a special function for

reuse of a flat battery/rechargeable battery. You

can recharge a completely discharged battery/

rechargeable battery. Protection against wrong

connection and short circuit ensures safe charging.

The integrated electronics do not start the car char-

ger at once after connection of the battery, but only

after a charging mode has been selected.

If the connection terminals are connected to the

battery and the device is connected to the mains,

the digital display

8

will show "Connected". After

the charging mode has been selected, the display

"Charging" lights up. When charging is complete,

the display "Charged" lights up.

If the digital display is continually lit before the

battery is completely charged, there is a defect.

 In this case, check again if the connection

terminals

6

,

5

are correctly attached to the

battery and whether the correct battery type

has been chosen. If the display lights up

continually anyway, there may be a defect in

the battery.

Digital display button

1

: Permits replacing of

the digital display of the voltage and the charging

progress in percent (battery %). Use this button in

order to switch between the following displays:

– Battery %: shows the charging progress of the

connected battery in percent.

– Voltage: shows the voltage of the connected

battery.

– Alternator %: Output power in percent

Battery type button

2

: Use this button to set

the type of the battery to be charged. You can

choose between different battery types here. The

battery type must be set correctly before charging

commences:

– 12 V Regular: These batteries (lead-acid bat-

teries) are usually used in cars, trucks and

motorcycles. They have venting caps and are

often marked as "low-maintenance" or "no

maintenance". This battery type is meant for

transferring energy quickly (e.g. starting an

engine). "Regular" batteries should not be used

for "Deep Cycle" applications.

– 12 V Deep Cycle: These batteries are usually

also marked as "Deep Cycle" or "Marine".

Batteries of this type are usually larger than

other battery types. This supplies less short-term

energy, but a longer-term energy transmission.

These batteries can withstand a large number

of discharge cycles.

– 12 V AGM/gel: The battery types AGM

are usually good deep cycle batteries. They

have the best "service life" when they are

recharged before they have been discharged

by more than 50%. At complete discharge,

they can withstand about 300 charge cycles.

The battery type GEL is similar to the battery

type AGM. The voltage at recharging is lower

GB

12

Operation

than in other lead-acid batteries. If you use the

wrong charger for a gel battery, a reduced

output or shorter service life can be expected.

– 6 V Regular: Choose this mode for commercial

6-V batteries.

Charge-start button

3

: Use this button to

switch between the following options:

– Fast charge: fast charging (recommended for

low outdoor temperatures/winter)

– Normal charge: normal charging (normal

speed)

– Start: supplies 75 Ampere briefly to bridge

batteries with a weak charge or flat batteries

for starting the engine

Attention: The mode can only be terminated by

pulling the mains cable

7

.

 Using the jump-start

function

Always make all connections as

described and in the proper order. Otherwise, the

electronic system of the vehicle can be damaged.

If proceeding contrary to the specifications

described, you will act at your own risks and

responsibility.

Attention: This function is not suitable for

batteries below 45 Ah. For batteries below 45 Ah,

this function may damage the battery. For diesel

vehicles and large-volume gasoline motors, higher

currents than 75 A are needed for starting at times.

Note: The charger has an analysis program that

protects the battery from damage in particular

for the jump-start function (e.g. sulphatisation, too

strong voltage drops). If the batteries are dis-

charged very strongly or subject to very high stress,

the device will not activate the jump-starter to

protect the battery. During this process, the battery

is already being charged at low currents (charging

is lit). The display then stays at "0". In this case,

jump starting is not possible. This protects the

battery from damage. The battery should be

charged first. The function "Fast Charge" or

"Normal Charge" can be used for this.

 If the connection terminals are connected

correctly, the car charger will automatically

choose the proper battery type. You can check

it in the option field "Battery type" and change

it by pushing the Battery-Type button

2

if

necessary.

 Now use the Charge-Start button

3

to select

the function "Start". The car charger now

analysis the charge condition of the battery.

The display now shows "0".

 Now actuate the vehicle's ignition. A count-

down of 5 seconds now starts in the display

(including a lead time or analysis function of

2 seconds and jump-start function of 3 seconds

at 75 A), when jump-start by the car charger

is necessary (this will be analysed by the car

charger in advance). During this countdown,

your car charger will briefly supply 75 A, in

order to bridge the battery for starting the en-

gine. This will be followed by a break of 180

seconds to protect the battery. Now the cycle

restarts (2 seconds lead or analysis function

and 3 seconds jump-start function at 75 A /

180 seconds pause).

 To disconnect the device, remove the connec-

tion terminals first (

6

/

5

) and then pull the

mains cable

7

.

Note: If the battery is discharged entirely, the

75 A will not be sufficient to start the engine in all

vehicles (e.g. diesel vehicles).

 In this case, use the Charge-Start button

3

to select the option "Fast Charge" and then

charge the battery to 60 % (for diesel engines,

the warm-up withdraws energy from the bat-

tery. The 60% must be pending after warm-up).

You can track charging progress at the display by

selecting the option "Battery %" with the digital

display button

1

.

 When 60% is reached, repeat the jump-start

function.

Attention: End the mode by pulling the mains

plug

7

.

GB

13

Operation

/

Maintenance and care

/ Warranty and service information

Alternator test function

 Connect the mains cable

7

of the car charger

to the socket.

 Attach the red connection terminals

5

to the

plus pole of your battery. (The plus pole is

marked by a "+" and a red mark.)

 Attach the black connection terminals

6

to the

minus pole of your battery. (The minus pole is

marked by a "+" and a black mark.)

Set the function alternator (LED next to the alternator)

via the button

1

. A %-value is displayed. Start the

engine. If the %-value rises with the engine running,

the alternator will charge the battery. If the %-value

drops or remains the same, there is a problem with

the alternator, the connection or the battery.

 Disconnect the device from the mains current.

 Disconnect the "–"-pole quick contact-

connection terminal (black)

6

from the "–"-

pole of the battery.

 Disconnect the "+"-pole quick contact-

connection terminal (red)

5

from the "+"-pole

of the battery.

 Replacing the fuse

The fuse of the car charger may be damaged,

e.g. by a device defect, overload, etc.

 Before replacing the fuse, pull the mains

cable

7

.

 Remove the cover of the fuse

4

by depressing

it slightly on the side.

 Unscrew the fuse

4

with a matching

open-faced wrench and attach the new fuse.

 Screw it on subsequently and replace the

cover

4

.

Note: If you need a new fuse, contact our

service (see chapter with notes on guarantee

and service processing).

 Maintenance and care

 Always pull the mains cable

7

from the socket

before you perform any work at the car charger.

 The device is maintenance-free. Deactivate the

device. Clean the metal and plastic surfaces of

the device with a dry cloth.

 Never use any solvents or other aggressive

cleaning agents.

 Warranty and service

information

Creative Marketing

Consulting GmbH warranty

Dear customer,

The warranty for this equipment is 3 years from the

date of purchase. In the event of product defects,

you have legal rights against the retailer of this

product. Our warranty, outlined below, does not

limit your statutory rights.

 Warranty conditions

The warranty period begins on the date of purchase.

Please retain the original sales receipt.

This document is required as your proof of purchase.

Should this product have a material or manufacturing

error within three years of the purchase date, the

product will be repaired or replaced – dependent on

our choice – by us at no cost to you. This warranty

service requires that you retain proof of purchase

(sales receipt) for the defective device for the three

year period and that you briefly explain in writing

what the fault entails and when it occurred.

If the defect is covered by our warranty, we will

return the repaired device or a replacement thereof.

A repair or exchange of the device does not start a

new warranty period.

 Extent of warranty

The device has been manufactured according to

strict quality guidelines and meticulously examined

before delivery.

GB

14

...

/

Environmental notes and disposal information

The warranty applies to defects in material or

manufacture. This warranty does not extend to

product parts which are subject to normal wear

and tear and can thus be regarded as consum-

able parts, or for damages to fragile parts, e.g.

switches, rechargeable batteries, or parts made

from glass. This warranty is void if the product is

damaged, improperly used, or serviced. For proper

use of the product, all of the instructions given in

the original operating instructions must be followed

precisely. Uses and acts that the original operating

instructions advise or warn against are to be

avoided without question.

The product is only intended for private use and is

not for commercial use. The warranty becomes void

in the event of misuse and improper use, use of

force, and any interference not carried out by our

authorized service branch.

 Processing of warranty

claims

Please follow the instructions below to ensure quick

processing of your claim:

Please retain proof of purchase and the article

number (e.g., EAN) for all inquiries. The product

number can be found on the type plate, an

engraving, the cover page of your instructions

(bottom left), or the sticker on the back or bottom.

Should you have any functional fault or other error,

first contact the service department listed below

by phone or email.

You can then forward a product recognized as

defective with a proof of purchase (sales receipt)

and a statement indicating what the fault entails

and when it occurred to the service address, which

will be given at no cost to you for postage.

Note:

You can download this handbook and

many more, as well as product videos

and software at www.lidl-service.com.

How to contact us:

GB, NI, IE

Name: C. M. C. GmbH

Website: www.cmc-creative.de

E-mail: ser[email protected]

Phone: 0-808-189-0652

Registered office: GERMANY

IAN 290923

Please note that the following address is not a ser-

vice address. Please first contact the service point

(hotline) named above.

Address:

C. M. C. GmbH

Katharina-Loth-Str. 15

66386 St. Ingbert

GERMANY

Ordering spare parts:

www.lidl.com/contact-us

 Environmental notes and

disposal information

Do not throw electrical tools into

the household waste!

Always recycle the device, accessories

and packaging in an environmental-

ly-friendly manner.

Do not dispose of the car charger in household

waste, in fire or in water. Devices which are no

longer functional should be recycled whenever

possible.

Contact your local retailer for information.

As the consumer you are legally

obligated (Battery Ordinance) to return

any used batteries. Batteries containing

harmful substances are labelled with the

adjacent symbol, which indicates the

GB

15

Declaration of conformity

ban on disposal in household waste.

The abbreviations for the essential heavy

metals are: Cd = Cadmium,

Hg = Mercury, Pb = Lead.

Take used batteries to a disposal facility in your

city or community, or back to the distributor. This

satisfies your legal obligations and you are greatly

contributing to protecting the environment.



Declaration of conformity

We,

C. M. C. GmbH

Responsible for documentation: Mark Uhle

Katharina-Loth-Str. 15

66386 St. Ingbert

GERMANY

declare in our sole responsibility the product

Car charger with jump-start function

Year of manufacture: 2017 / 43

IAN: 920923

Year of CE mark: 2017

Model: ULG 12 B3

meets the basic safety requirements of European

Directives

EC low-voltage directive

2014 / 35 / EU

EC directive on electromagnetic

compatibility

2014 / 30 / EU

RoHS directive

2011 / 65 / EU

The object of the declaration described above

meets the requirements of Directive 2011 / 65 / EU

of the European Parliament and Council dated

8th June 2011, restricting the use of certain

hazardous substances in electrical appliances and

electronics.

The conformity assessment is based on the

following harmonized standards:

EN 60335-2-29:2004/A2:2010

EN 60335-1:2012/A11:2014

EN 62233:2008

EN 50498:2010

EN 55014-1:2006/A2:2011

EN 55014-2:1997/A2:2008

EN 61000-3-2:2014

EN 61000-3-3:2013

AfPS GS 2014:01 PAK

St. Ingbert, 18 August 2017

ppa. Marc Uhle

- Document officer

GB

16

HU

17

Tartalomjegyzék

Bevezetés .......................................................................................................................... Oldal 18

Rendeltetésszerűhasználat .................................................................................................. Oldal 18

Azalkatrészekleírása............................................................................................................ Oldal 19

Műszakiadatok ...................................................................................................................... Oldal 19

Szállításiterjedelem............................................................................................................... Oldal 19

Biztonsági tudnivalók .................................................................................................... Oldal 19

Kezelés .................................................................................................................................. Oldal 23

Terméktulajdonságok ............................................................................................................. Oldal 23

Csatlakoztatás ....................................................................................................................... Oldal 23

Leválasztás ............................................................................................................................ Oldal 23

Atöltőmódkiválasztása ........................................................................................................ Oldal 23

Indítássegítőfunkcióhasználata ........................................................................................... Oldal 25

Biztosítékcseréje................................................................................................................... Oldal 26

Karbantartás és ápolás ................................................................................................. Oldal 26

Garanciával és szervizszolgáltatással kapcsolatos tudnivalók................ Oldal 26

Garanciálisfeltételek ............................................................................................................. Oldal 26

Agaranciaterjedelme ............................................................................................................ Oldal 27

Garanciálisesetkezelése ...................................................................................................... Oldal 27

Környezetvédelemmel kapcsolatos tudnivalók

és az ártalmatlanítás adatai ........................................................................................ Oldal 29

EU megfelelőségi nyilatkozat............................................................................................Oldal 29

HU

18

Személygépjármű akkumulátor

töltő berendezés indítási segéd

funkcióval ULG 12 B3

Bevezetés

Gratulálunk!

Vállalatunkkiválóminőségűterméke

mellett döntött.

Atermékkelmégazelsőüzembehelyezéselőtt

ismerkedjenmeg.Ehhezgyelmesenolvassa

elakövetkezőeredetihasználataiútmutatót

ésabiztonságitudnivalókat.Aterméküzembe

helyezésétcsakoktatásbanrészesítettszemély

végezheti.

 Rendeltetésszerű használat

AzUltimateSpeedULG12B3személygépjármű

akkumulátortöltőberendezéspulzusfenntartótöl-

téssel(chipszoftver),melyakövetkezőelektrolit

oldatos6V-osvagy12V-osólomakkumulátorok

(elemek),AGM-akkumulátorok,sav-ólomakku-

mulátorok,DeepCycle(bootakkumulátorok)vagy

gélakkumulátoroktöltéséreéskisütéséreszolgál:

• 12V/6Vés8–180Ahkapacitásúszemély-

gépkocsiésmotorkerékpárakkumulátor

Ezenkívülakisütöttakkumulátorokatregene-

rálnitudja(azakkumulátortípusátólfüggően).

Aszemélygépjárműakkumulátortöltőberende-

zésszikraképződésvagytúlmelegedésellen

védőkapcsolássalrendelkezik.Mindennem

rendeltetésszerűvagyszakszerűtlenhasználat

agaranciaelvesztéséveljár.Agyártósemmilyen

felelősségetsemvállalanemrendeltetésszerű

használatbóleredőkárokért.Aberendezésipari

használatranemalkalmas.

Tudnivaló: Aszemélygépjárműakkumulátortöltő

berendezésselbeépítettakkumulátorralrendelke-

zőelektromosautókatnemlehettölteni.

Bevezetés

Jelen eredeti használati útmutatóban / a berendezésen

a következő piktogramokat használjuk:

Használatbavétel előtt gyelmesen

olvassaelatermékhasználatiútmu-

tatóját.

Használatbavétel előtt gyelme-

senolvassaelatermékhasználati

útmutatóját.

MEGJEGYZÉS: ez a szimbólum

atermékkel,ésannakhasználatával

kapcsolatoskiegészítőinformációkra

hívjafelgyelmét.

Figyelem!Lehetségesveszélyek!

Figyelem!Robbanásveszély!

Figyelem!Áramütésveszély! Védettség: védett ≥ 12,5 mm

átmérőjű szilárd idegen testek

ellen;egyujjalnemnyitható;víz

ellen nem védett.

Az akkumulátorokat az erre a célra

szolgálógyűjtőhelyenadjale!

8-180Aókapacitásúólomakkumu-

látorokhoz.

Ne helyezze az elektromos ké-

szülékeket a háztartási hulladék

közé!

Csakzárható,jólszellőztethetőhelyi-

ségbenhasználható!

~50Hz

50 Hz frekvenciájú váltakozó

feszültségűáramhoz.

I

HU

19

Bevezetés/Biztonságitudnivalók

 Az alkatrészek leírása

Digitáliskijelzőgombja

Akkumulátortípusgombja

Töltésindításgombja

Afedélbiztosítása

„+“-pólussorkapocs(piros)

„–“-pólussorkapocs(fekete)

Hálózatikábel

digitáliskijelző

 Műszaki adatok

Bemenetifeszültség: 230V~50Hz

Visszatérőáram*:

<5mA(nincsAC-bemenet)

Névlegeskimeneti

feszültség: 6V/12V

Töltőáram: 2A,6A,12A±10%

Akkumulátortípusa: 12V/6Vés

 8–180Ahkapacitás

Házvédettségimódja:IP20

*=avisszatérőáramaztazáramotjelenti,

melyetatöltőberendezésazakkumulátorból

használel,hanincshálózatiáramforrásra

kötve.

 Szállítási terjedelem

Akicsomagolásutánközvetlenül

ellenőrizzeaszállításiterjedelmet,

valamintagépvalamennyirészét,

hogynincsenek-emegsérülve.

Ahibásberendezéstvagyannakelemeitne

helyezzeüzembe.

1dbUltimateSpeedULG12B3akkumulátortöltő

2gyorsrögzítősorkapocs(1piros,1fekete)

1eredetikezelésiútmutató

Biztonsági tudnivalók

ABERENDEZÉSNEKERÜLJÖN

GYEREKEKKEZÉBE!

 VESZÉLY! Kerüljeelaszaksze-

rűtlenhasználatbóleredőélet-

éssérülésveszélyt!

 VIGYÁZAT! Sérültkábel,

hálózatikábelvagyhálózati

csatlakozóeseténneüzemeltes

-

seakészüléket.Asérülthálózati

kábelazáramütésveszélyemiatt

életveszélyes.

 Ahálózatikábeltsérülésesetén

csakfelhatalmazássalren-

delkezőésképzettszakmai

személyzetteljavíttassameg!

Javításiigényeseténlépjen

kapcsolatbaazönországának

szervizszolgálatával!



ÁRAMÜTÉS VESZÉLYE!

Állandójelleggel

ajárműbeszereltakkumulátor

töltésekorbiztosítsa,hogy

ajárműneüzemeljen!Kapcsolja

kiagyújtástésvigyeajárművet

parkolóállásba,akézifékbe-

húzásával(pl.személygépjármű

esetén),vagyakötélrögzíté-

sével(pl.elektromoscsónak

esetén)!



ÁRAMÜTÉS VESZÉLYE!

Mielőttasorkapcsot

eltávolítja,válasszaleasze-

mélygépjárműakkumulátortöltő

berendezéstahálózatról.

 Előszöraztasorkapcsot

csatlakoztassa,amelyiknem

csatlakozikakarosszériára.

2

1

3

4

5

6

7

8

HU

20

Biztonságitudnivalók

 Amásiksorkapcsotakkumulátor-

tólésabenzinvezetéktőltávol

csatlakoztassaakarosszériához.

 Csakezutáncsatlakoztassa

aszemélygépjárműakkumulátor-

töltőberendezéstabetápláló

hálózatra.

 Aszemélygépjárműakkumulá-

tortöltőberendezésttöltésután

válasszaleabetáplálóhálózatról.

 Csakezutántávolítsael

asorkapcsotakarosszériáról.

Közvetlenülezutántávolítsael

asorkapcsotazakkumulátorról.



ÁRAMÜTÉS VESZÉLYE

!

Apóluscsatlakozókábelt

(„–“és„+“)kizárólagaszigetelt

részénfogjameg!



ÁRAMÜTÉS VESZÉLYE!

Acsatlakozótazakku-

mulátorhozésazelektromos

áramhálózatialjzatáhoznedves-

ségtőlteljesenvédvevezesseel!



ÁRAMÜTÉS VESZÉLYE!

Aszemélygépjármű

akkumulátortöltőberendezés

szerelését,karbantartásátés

ápolásátcsakakkorvégezze,

haaberendezésnincshálózati

áramforrásracsatlakoztatva!



ÁRAMÜTÉS VESZÉLYE!

Azoknálazakkumuláto-

roknál,melyekfolyamatosanrá

vannakcsatlakoztatvaajárműre,

afeltöltésiéskisütésifolyamat

befejezéseutánelőszöraszemél-

ygépjárműakkumulátortöltő

berendezésmínuszpóluscsatla

-

kozókábelét(fekete)távolítsael

azakkumulátormínuszpólusáról.

 Nehagyjonkisgyermekeket

ésgyermekeketfelügyelet

nélkülaszemélygépjárműtöltő

berendezéssel!

 A gyerekek az elektromos

berendezésekkezelésének

esetlegesveszélyeitmég

nemtudják

felmérni.Ügy-

eljen a gyermekekre annak

érdekében,hogynejátszanak

akészülékkel.

 Korlátozottzikai,érzékelő

vagymentálisképességű,vagy

ismeretekkeléstapasztalatok-

kalnemrendelkezőszemélyek

akészüléketcsakfelügyeletmel-

lett,illetveakkorhasználhatják,

haőketakészülékhasználatára

kioktatták,ésakészülék

használatánakveszélyeit

megértették. A gyermekek

nemjátszhatnakakészülékkel.

Atisztítástésafelhasználóikar-

bantartástgyermekekfelügyelet

nélkülnemvégezhetik.

 ROBBANÁSVESZÉLY!

Óvakodjonarendkívül

robbanásveszélyesrobbanógáz

reakciótól!Atöltőéstöltésfenn-

tartóműveletvégzésesorán

Stránka sa načítava ...

ULTIMATE SPEED 290923 Original Instructions Manual

Táto príručka je tiež vhodná pre

ULTIMATE SPEED 290923 Original Instructions Manual

V iných jazykoch

Súvisiace články

Ďalšie dokumenty