Panasonic SCDM502E Návod na používanie

Značka: Panasonic

Model: SCDM502E

Kategória: Domáce audio súpravy

Typ: Návod na používanie

POLSKI ENGLISHČESKY

TQBJ2215

2020/02/29

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Compact Stereo System

Kompaktowy zestaw stereo

Kompaktní stereo systém

Model No. SC-DM502

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Dziękujemy za zakupienie tego produktu.

Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie przeczytać niniejsze

zalecenia i zachować instrukcję obsługi do wglądu.

Děkujeme, že jste si zakoupil tento výrobek.

Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte pro pozdější

použití.

SC-DM502E-TQBJ2215_eng_pol_cze.book 1 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Table of contents

Accessories....................................................... 2

Safety precautions............................................ 3

Caution for AC Mains Lead.............................. 3

License .............................................................. 4

Control reference guide ................................... 5

Connections...................................................... 6

Using the remote control ................................. 6

DEMO play......................................................... 6

Inserting media .................................................7

About Bluetooth

.............................................. 7

Bluetooth

operations...................................... 8

Media playback controls .................................. 9

Listening to DAB/DAB+.................................. 10

Listening to FM radio ..................................... 12

Listening to music on an external equipment

..... 13

Sound adjustment .......................................... 14

Clock and Timer.............................................. 14

Others .............................................................. 15

Playable media................................................ 16

Unit and media care........................................ 16

Troubleshooting.............................................. 17

Specifications ................................................. 19

Accessories

Check the supplied accessories before using this unit.

About descriptions in these operating

instructions

≥ Pages to be referred to are indicated as “l ±±”.

≥ Unless otherwise indicated, operations are described using

the remote control. You can also use the controls on this

unit if they are the same.

∏ 1 Remote control

(N2QAYB001215)

∏ 1 Battery for remote control

∏ 2 AC mains leads

[For_the_United_Kingdom_and_Ireland]

(K2CT2YY00146)

[For_Continental_Europe]

(K2CQ2YY00164)

∏ 1 DAB indoor antenna

(N1CYYYY00022)



≥ Please use the supplied AC mains lead suitable for the

household mains socket.

≥ Do not use AC mains lead with other equipment.

≥ Product numbers provided in these operating instructions are

correct as of December 2019. These may be subject to

change.

SC-DM502E-TQBJ2215_eng_pol_cze.book 2 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases, on

this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the

plug.

– Do not use a damaged mains plug or socket outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from

the socket outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

Avoid the use in the following conditions

≥ High or low extreme temperatures during use, storage or

transportation.

≥ Replacement of a battery with an incorrect type.

≥ Disposal of a battery into fire or a hot oven, or mechanically

crushing or cutting of a battery, that can result in an

explosion.

≥ Extremely high temperature and/or extremely low air

pressure that can result in an explosion or the leakage of

flammable liquid or gas.

Battery

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

≥ Mishandling of batteries can cause electrolyte leakage and

may cause a fire.

– Remove the battery if you do not intend to use the remote

control for a long period of time. Store in a cool, dark

place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

– Do not take apart or short circuit.

– Do not recharge alkaline or manganese batteries.

– Do not use batteries if the covering has been peeled off.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of

disposal.

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin

mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure

that the replacement fuse has a rating of 5-ampere and

that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the

body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used

until a replacement cover is obtained.

A replacement fuse cover can be purchased from your

local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of

AC mains plug (figures A and B). Confirm the AC

mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

WARNING

CAUTION

Figure A Figure B

Fuse cover

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

SC-DM502E-TQBJ2215_eng_pol_cze.book 3 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our RE

products from our DoC server:

http://www.ptc.panasonic.eu

Contact to Authorized Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

NORSK

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser,

på apparatet.

– Bruk det anbefalte tilbehøret.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til

kvalifisert servicepersonell.

Vekselstrømnett

≥ Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan

trekkes fra stikkontakten.

Produkt

≥ Dette produktet anvender en laser. Betjening av kontroller

eller justering eller andre inngrep enn de beskrevet i denne

bruksanvisning kan føre til farlig bestråling.

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate

klimaforhold.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget kabinett

eller et annet lukket sted. Pass på at produktet er godt

ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med

aviser, duker, gardiner eller lignende.

License

The symbols on this product (including the

accessories) represent the following:

Class II equipment (The construction of the

product is double-insulated.)

IOn

Í Standby

Type of wireless Operating Frequency

Maximum power

(dBm EIRP)

Bluetooth

2402-2480 MHz 10 dBm

Safety information for customers in

Norway

ADVARSEL

FORSIKTIG

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical

and electronic products and batteries

must not be mixed with general

household waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to

applicable collection points in

accordance with your national

legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential

negative effects on human health and the

environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol

(bottom symbol):

This symbol might be used in

combination with a chemical symbol.

In this case it complies with the

requirement set by the Directive for

the chemical involved.

The Bluetooth

word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by

Panasonic Corporation is under license. Other trademarks and

trade names are those of their respective owners.

SC-DM502E-TQBJ2215_eng_pol_cze.book 4 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Control reference guide

1 Standby/on switch [Í/I], [Í]

Press to switch the unit from on to standby mode or vice

versa. In standby mode, the unit is still consuming a small

amount of power.

2 Remote control signal sensor

Distance: Within approx. 7 m directly in front

Angle: Approx. 30o left and right

3 Display

4 Adjust the volume (0 (min) to 50 (max))

5 Select the audio source

On this unit:

≥ Press and hold to enter pairing mode (l 8) or

disconnect a Bluetooth

device (l 8).

On the remote control:

[ ]: “BLUETOOTH”

[O, N SELECT]:

6 USB port (l 7)

7 Direct preset buttons for storing or selecting radio

station ([1] to [5]) (l 10, 12)

8 Disc tray

≥ Do not put any object in front of the disc tray.

9 Basic playback control buttons

10 Open or close the disc tray

11 Enter DEMO play mode (l 6)

12 Speakers

These speakers do not have magnetic shielding. Do not

place them near a TV, personal computer or other

magnetic devices.

13 Dim the display panel

Press again to cancel.

14 Enter setup menu

15 Change the displayed information

16 Selection/OK

17 Set the sleep timer

18 Mute the sound

Press again to cancel. “MUTE” is also cancelled when the

volume is adjusted or the unit is turned off.

19 Set the play menu item

20 Enter sound menu

12 3 4

678 910115

“CD” -------------. “DAB+” -------------. “FM” -------------. “D-IN”

“BLUETOOTH” (--------------- “USB” (---------------- “AUX”

“CD” (----------. “DAB+” (----------. “FM” (----------. “D-IN”

“BLUETOOTH” (--------------. “USB” (--------------. “AUX”

SC-DM502E-TQBJ2215_eng_pol_cze.book 5 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Connections

1 Connect the antenna.

This unit can receive DAB/DAB+ and FM stations

with the DAB antenna.

Rotate the antenna at A to improve reception.

2 Connect the AC mains lead after all other

connections are completed.

This unit consumes a small amount of AC power

(l 19) even when turned off.

≥ In the interest of energy conservation, if you will not be

using this unit for an extended period of time, unplug it

from the mains socket.

≥ Some settings will be lost after you disconnect the

system. You have to set them again.



≥ Tape the antenna to a wall or column in a position with the

least amount of interference.

≥ If radio reception is poor, use an outdoor antenna (not

supplied).

Using the remote control

Insert the battery so the terminals (i and j) match

those in the remote control.

Point it at the remote control signal sensor on this unit.

≥ To avoid interference, please do not put any objects in front

of signal sensor.

DEMO play

This unit is built-in with a sound demonstration music.

To play the demonstration music

1 Turn the unit on.

2 Press and hold [1/;, −DEMO] on this unit for at

least 2 seconds until “WAIT FOR DEMO PLAY”

appears on the display.

The demonstration music will be played for

approximately 1 minute. (“DEMO PLAY” is displayed

during DEMO play.)

After playback completes, this unit will automatically

exit the DEMO play mode.

≥ To exit during DEMO play, press [∫].



Be sure to tighten the nut fully.

DAB indoor antenna (supplied)

Adhesive tape

(not supplied)

To a mains socket

AC mains lead (supplied)

(Alkaline or manganese

battery)

SC-DM502E-TQBJ2215_eng_pol_cze.book 6 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Inserting media

1 Press [<] on this unit to open the disc tray.

2 Put in a disc with the label facing up.

3 Press [<] again to close the disc tray.

Insert the USB device directly. Do not use any USB

extension cable.

≥ If you find difficulty in accessing this unit’s

[SELECT, s PAIRING] when a USB device is connected,

use the remote control. Or, remove the USB device as

necessary.

≥ Please disconnect the USB device if you finish using.



≥ When moving this unit, be sure to remove all media and turn

this unit to standby mode.

About Bluetooth

∫ Frequency band used

≥ This system uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

≥ The actions below are punishable by law in some

countries:

– Taking apart or modifying the system.

– Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all

Bluetooth

equipped devices is not guaranteed.

≥ All devices must conform to standards set by

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a

device, it can fail to connect or some operations can

be different.

≥ This system supports Bluetooth

security features.

But depending on the operating environment and/or

settings, this security is possibly not sufficient.

Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

device.

∫ Range of use

≥ Use this device at a maximum range of 10 m. The

range can decrease depending on the environment,

obstacles or interference.

∫ Interference from other devices

≥ This system may not function properly and troubles

such as noise and sound jumps may arise due to

radio wave interference if this system is located too

close to other Bluetooth

devices or the devices that

use the 2.4 GHz band.

≥ This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too

strong.

∫ Intended usage

≥ This system is for normal, general use only.

≥ Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals,

laboratories, etc).

Inserting a disc

Connecting a USB device

Panasonic bears no responsibility for data and/or

information that is compromised during a

wireless transmission.

SC-DM502E-TQBJ2215_eng_pol_cze.book 7 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Bluetooth

operations

You can listen to the sound from the Bluetooth

audio

device from this unit wirelessly.

≥ Refer to the operating instructions of the Bluetooth

device for details.

Preparation

≥ Turn on the Bluetooth

feature of the device and

place the device near this unit.

∫ Pairing with Bluetooth

devices

1 Press [ ] to select “BLUETOOTH”.

≥ If “PAIRING” is indicated on the display, go to step 3.

2 Press [PLAY MENU] to select “PAIRING” and then

press [OK].

≥ Alternatively, press and hold [SELECT, s PAIRING]

on the unit.

3 Select “SC-DM502” from the Bluetooth

device’s

Bluetooth

menu.

≥ The MAC address (alpha-numerical string that is unique

to each set) may be displayed before “SC-DM502” is

displayed.

≥ The name of the connected device is indicated on the

display for a few seconds.

4 Start playback on the Bluetooth

device.

∫ Connecting a paired Bluetooth

device

1 Press [ ] to select “BLUETOOTH”.

≥ “READY” is indicated on the display.

2 Select “SC-DM502” from the Bluetooth

device’s

Bluetooth

menu.

≥ The name of the connected device is indicated on the

display for a few seconds.

3 Start playback on the Bluetooth

device.



≥ If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this unit. If a 9th device

is paired, the device that has not been used the longest will

be replaced.

≥ This unit can only be connected to one device at a time.

≥ When “BLUETOOTH” is selected as the source, this unit will

automatically try and connect to the last connected

Bluetooth

device. (“LINKING” is indicated on the display

during this process.) If the connection attempt fails, try to

establish a connection again.

You can change the transmission mode to prioritise

transmission quality or sound quality.

Preparation

≥ Press [ ] to select “BLUETOOTH”.

≥ If a Bluetooth

device is already connected,

disconnect it.

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [3, 4] to select the mode and then press

[OK].

MODE 1: Emphasis on connectivity

MODE 2: Emphasis on sound quality



≥ Select “MODE 1” if the sound is interrupted.

≥ When enjoying video contents with this function, the video

and audio output may not be synchronised. In this case,

select “MODE 1”.

≥ The factory default is “MODE 2”.

If the sound input level from the Bluetooth

device is

too low, change the input level setting.

Preparation

≥ Connect a Bluetooth

device.

1 Press [PLAY MENU] repeatedly to select “INPUT

LEVEL”.

2 Press [3, 4] to select the level and then press

[OK].

“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”

^----------------------------------------------------J



≥ Select “LEVEL 0” if the sound is distorted.

≥ The factory default is “LEVEL 0”.

1 While a Bluetooth

device is connected:

Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

2 Press [3, 4] to select “OK? YES” and then press

[OK].



≥ You can also disconnect the Bluetooth

device by pressing

and holding [SELECT, s PAIRING] on the unit.

≥ The Bluetooth

device will be disconnected if a different

audio source (e.g., “CD”) is selected.

Connecting via Bluetooth

Bluetooth

transmission mode

Bluetooth

input level

Disconnecting a Bluetooth

device

SC-DM502E-TQBJ2215_eng_pol_cze.book 8 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Media playback controls

The following marks indicate the availability of the

feature.

Preparation

≥ Turn the unit on.

≥ Insert the media or connect the Bluetooth

compatible device. (l 7, 8)

1 Select the audio source.

For disc:

Press [O, N SELECT] repeatedly to select “CD”.

For USB device:

Press [O, N SELECT] repeatedly to select

“USB”.

For Bluetooth

device:

Press [ ] to select “BLUETOOTH”.

(When selecting using this unit, press

[SELECT, s PAIRING].)

2 Press [1/;] to start playback.

Basic controls

∫ To display information

([CD], [USB], [BLUETOOTH])

You can display the track, artist, album name, file type,

bit rate, and other information. (The information varies

depending on the audio source.)

Press [DISPLAY] repeatedly.

e.g.

[USB] (MP3)



≥ To use this unit’s remote control with a Bluetooth

device, the

Bluetooth

device must support AVRCP (Audio Video

Remote Control Profile).

Depending on the status of the device, some controls may

not work.

≥ Maximum number of displayable characters:

Approx. 32

≥ This system supports ver. 1 and 2 ID3 tags.

≥ Text data that is not supported will not be displayed or will be

shown differently.

Select the playback mode.

1 Press [PLAY MENU] repeatedly to select

“PLAYMODE” or “REPEAT”.

2 Press [3, 4] to select the setting and then press

[OK].



≥ During random playback, you cannot skip to tracks which

have been played.

≥ The mode is cancelled when you open the disc tray or

remove the USB device.

[CD]: CD audio in CD-DA format or a CD that

contains MP3 files (l 16)

[USB]: USB devices containing MP3 file (l 16)

[BLUETOOTH]: Connected Bluetooth

device (l 8)

Basic play ([CD], [USB], [BLUETOOTH])

Stop Press [∫].

≥ [USB]: The position is memorised and

“RESUME” is displayed.

≥ [USB]: Press [∫] twice to stop the

playback fully.

Pause Press [1/;].

Press again to continue playback.

Skip Press [:/6] or [5/9] to skip

track.

[CD] (MP3), [USB]

Press [3] or [4] to skip the album.

Search During play or pause, press and hold

[:/6] or [5/9].

“A”: MP3 album number.

“T”: MP3 track number.

(“  ” stands for a number.)

Playback modes ([CD], [USB])

PLAYMODE

OFF

PLAYMODE

Cancels the play mode setting.

1-TRACK Only plays the selected track.

≥ “1”, “ ” is displayed.

(Skip to the desired track.)

1-ALBUM Only plays the selected album.

≥ Press [3] or [4] to select the album.

≥ “1”, “ ” is displayed.

RANDOM Plays the contents randomly.

≥ “RND” is displayed.

1-ALBUM

RANDOM

Plays the tracks in the selected

album randomly.

≥ Press [3] or [4] to select the album.

≥ “1”, “ ”, “RND” is displayed.

REPEAT

ON REPEAT Turns on repeat mode.

≥ “`” is displayed.

OFF

REPEAT

Turns off repeat mode.

SC-DM502E-TQBJ2215_eng_pol_cze.book 9 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Listening to DAB/DAB+

Preparation

≥ Make sure that the DAB antenna is connected. (l 6)

≥ Turn the unit on.

≥ Press [O, N SELECT] repeatedly to select “DAB+”.

To listen to DAB/DAB+ broadcasts, the available

stations need to be memorised in this unit.

≥ This unit will automatically start the “DAB AUTO

SCAN” and memorise the stations that are available

in your region if you select “DAB+” for the first time.



≥ “SCAN FAILED” is displayed when the auto scan is

unsuccessful. Locate the position with the best reception

(l 11, “To verify or improve the signal reception quality”) and

then re-scan DAB/DAB+ stations.

∫ To re-scan DAB/DAB+ stations

When new stations are added or when the antenna

has been moved, reperform the auto scan.

1 Press [PLAY MENU] to select “AUTO SCAN” and

then press [OK].

2 While “START ?” is flashing,

Press [OK].



≥ When updating the station memory with the auto scan,

preset stations will be erased. Preset them again (l below).

1 Press [PLAY MENU] repeatedly to select “TUNE

MODE”.

2 Press [3, 4] to select “STATION” and then press

[OK].

3 Press [:/6] or [5/9] to select the

station.

You can preset up to 20 DAB/DAB+ channels.

Channel 1 to 5 will be set under [1] to [5] on this unit.

(l right, “Changing the stations stored under [1] to

[5]”)

1 While listening to a DAB/DAB+ broadcast

Press [OK].

2 Press [3, 4] to select the desired preset channel

number and then press [OK].



≥ You cannot preset stations when the station is not

broadcasting or when the secondary service is selected.

≥ The station occupying a channel is erased if another station

is preset in that channel.

(On this unit)

You can change the stations stored under [1] to [5]

easily.

While listening to a DAB/DAB+ broadcast

Press and hold one of [1] to [5] until “P ” appears on

the display.

(“  ” stands for a number.)



≥ When you change the stations stored under [1] to [5],

channel 1 to 5 are also changed to the same corresponding

stations.

1 Press [PLAY MENU] repeatedly to select “TUNE

MODE”.

2 Press [3, 4] to select “PRESET” and then press

[OK].

3 Press [:/6] or [5/9] to select the

station.

≥ You can select channel 1 to 5 by pressing one of [1] to [5] on

this unit.



≥ To select by preset, make sure that stations have already

been preset manually.

≥ To add additional preset stations, select the station using the

method mentioned in “Listening to the memorised stations”

(l left).

Some DAB/DAB+ stations provide a secondary service

as well as the primary service. If the station you are

listening to is providing secondary service, “ ” will be

displayed.

1 While “ ” is displayed

Press [PLAY MENU] repeatedly to select

“DAB SECONDARY”.

2 Press [3, 4] to select the secondary service and

press [OK].



≥ The setting will go back to primary service when changes are

made (e.g. the station is changed).

Memorising stations

Listening to the memorised stations

Presetting DAB/DAB+ stations

Changing the stations stored under

[1] to [5]

Listening to preset DAB/DAB+

stations

Listening to the secondary service

SC-DM502E-TQBJ2215_eng_pol_cze.book 10 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Press [DISPLAY] to change the display.

The information will scroll through the display.

Each time you press the button:

If the DAB/DAB+ broadcast includes time information,

this unit’s clock will be automatically updated.

1 Press [PLAY MENU] repeatedly to select “AUTO

CLOCK ADJ”.

2 Press [3, 4] to select “ON ADJUST” and then

press [OK].



≥ Select “OFF ADJUST” to turn the automatic clock adjustment

function off.

To check the signal reception quality, at least 1

frequency block needs to be successfully memorised.

≥ If “SCAN FAILED” is displayed after “DAB+” is

selected or after an auto scan, proceed to “Manually

tuning 1 frequency block” (l below)

≥ If stations have already been memorised to this unit,

proceed to “Checking the DAB/DAB+ signal

reception quality” (l right)

∫ Manually tuning 1 frequency block

Use this function to scan 1 frequency block after

adjusting the position of the DAB antenna.

Preparation

Note down a frequency block that can be received in

your region (e.g., 12B 225.648 MHz).

1 While “SCAN FAILED” is displayed

Adjust the position of the DAB antenna.

2 Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

3 Press [3, 4] to select the frequency block that is

receivable in your region and then press [OK].



≥ If broadcasting stations are memorised, proceed to “To

re-scan DAB/DAB+ stations” to memorise stations on other

frequency blocks. (l 10)

≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a

station is memorised. If the situation does not improve, try

using an outdoor DAB antenna or consult your dealer.

∫ Checking the DAB/DAB+ signal

reception quality

1 While listening to the DAB/DAB+ broadcast:

Press [PLAY MENU] repeatedly to select “SIGNAL

QUALITY” and then press [OK].

≥ The current frequency block is displayed and then the

reception quality is indicated.

2 If the signal reception quality is poor, move the

antenna to a position where the reception quality

improves.

3 To continue checking the quality of other frequency

blocks:

Press [3, 4] again and select the desired

frequency.

4 Press [OK] to exit.



≥ If the antenna has been adjusted, perform auto scanning and

update the station memory. (l 10)

Display

Dynamic label: Information about the

broadcast

PTY display: Programme type

Ensemble label: The name of the ensemble

Frequency display: The frequency block and

frequency is displayed.

Time display: Current time

Automatic clock adjustment

To verify or improve the signal

reception quality

Reception quality

0 (poor) – 8 (excellent)

SC-DM502E-TQBJ2215_eng_pol_cze.book 11 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Listening to FM radio

You can preset up to 30 FM channels.

Channel 1 to 5 will be set under [1] to [5] on this unit.

(l right, “Changing the stations stored under [1] to

[5]”)

Preparation

≥ Make sure that the antenna is connected. (l 6)

≥ Turn the unit on.

≥ Press [O, N SELECT] repeatedly to select “FM”.

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [3, 4] to select “LOWEST” or “CURRENT”

and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency

(“FM 87.50”).

CURRENT:

To begin auto preset with the current frequency.*

≥ The tuner starts to preset all the stations it can receive

into the channels in ascending order.

*1: To change the frequency, refer to “Manual tuning”.

1 Press [PLAY MENU] repeatedly to select “TUNE

MODE”.

2 Press [3, 4] to select “PRESET” and then press

[OK].

3 Press [:/6] or [5/9] to select the

channel.

≥ You can select channel 1 to 5 by pressing one of [1] to [5] on

this unit.

∫ Manual tuning

1 Press [PLAY MENU] repeatedly to select “TUNE

MODE”.

2 Press [3, 4] to select “MANUAL” and then press

[OK].

3 Press [:/6] or [5/9] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

1 While listening to the radio broadcast

Press [OK].

2 Press [3, 4] to select the channel and then press

[OK].

≥ Do steps 1 through 2 again to preset more stations.



≥ A station previously stored is overwritten when another

station is stored in the same channel preset.

(On this unit)

You can change the stations stored under [1] to [5]

easily.

While listening to the radio broadcast

Press and hold one of [1] to [5] until “P ” appears on

the display.

(“  ” stands for a number.)



≥ When you change the stations stored under [1] to [5],

channel 1 to 5 are also changed to the same corresponding

stations.

∫ To display the current FM signal status

Press [DISPLAY] repeatedly to select “FM STATUS”.



≥ “STEREO” is displayed when this unit tunes to a stereo

broadcast.

∫ To display Radio Data System text data

This system can show the text data transmitted by the

Radio Data System available in some areas.

Press [DISPLAY] repeatedly.



≥ Radio Data System is available only when stereo works in

reception.

≥ Radio Data System may not be available if reception is poor.

Presetting stations automatically

Listening to a preset channel

Presetting stations manually

Changing the stations stored under

[1] to [5]

“FM ST”: FM stereo broadcast is being received.

“FM - - - -”: No broadcast is received or FM

broadcast received is weak or in

monaural.

“FM MONO”: You have set the “FM MODE” to

“MONO”. (l 17, “If noise is excessive

during FM reception.”)

“PS”: Programme service

“PTY”: Programme type

“FREQ”: Frequency

SC-DM502E-TQBJ2215_eng_pol_cze.book 12 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Listening to music on an

external equipment

You can connect a TV, DVD player, etc., to listen to the

music through this unit.



≥ Switch off all equipment before connection and read the

appropriate operating instructions.

≥ Disconnect the AC mains lead before connection. Do not

connect the AC mains lead until all other connections are

completed.

≥ Do not bend cables at sharp angles.

≥ Components and cables are sold separately.

≥ Sound distortion can occur when you use an adaptor.

≥ If you want to connect equipment other than those described,

refer to the audio dealer.

∫ Using the optical input

1 Connect the external equipment.

2 Turn this unit on.

3 Press [O, N SELECT] repeatedly to select “D-IN”.

4 Play the external equipment.



≥ This system supports linear PCM signal.

≥ Multi-channel source will be converged to 2 channels.

≥ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz

≥ The sound is muted if the signal format or frequency is not

supported.

≥ Reduce the volume on the TV to its minimum, and then

adjust the volume of this unit.

∫ Using the auxiliary input

1 Connect the external equipment.

2 Turn this unit on.

3 Press [O, N SELECT] repeatedly to select “AUX”.

4 Play the external equipment.

e.g. TV

(not supplied)

Optical digital audio cable

(not supplied)

AUDIO OUT

e.g.DVD player

(not supplied)

Audio cable

(not supplied)

SC-DM502E-TQBJ2215_eng_pol_cze.book 13 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect.

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

≥ When “PRESET EQ” is selected, Bass and Treble settings

will be changed to the settings in preset EQ setting.

You can save your desired sound settings to

“SOUND 1”, “SOUND 2” or “SOUND 3” as

“MY SOUND”.

1 Adjust your desired sound effects. (l above)

2 Press [SETUP] to select “SAVE MY SOUND”.

3 Press [3, 4] to select a setting number and then

press [OK].

≥ “SAVED” is displayed.

≥ The sound settings previously saved will be replaced

when you save new settings to the same setting

number.

Recalling the sound settings you have

saved

1 Press [SOUND] to select “MY SOUND”.

2 Press [3, 4] to select the desired sound setting

number and then press [OK].

Clock and Timer

This is a 24-hour clock.

1 Press [SETUP] to select “CLOCK”.

2 Press [3, 4] to set the time and then press [OK].

∫ To check the time

Press [SETUP] to select “CLOCK” and then press

[OK].

(During standby, press [DISPLAY].)



≥ The clock is reset when there is a power failure or when the

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

The sleep timer can turn the unit off after a set time.

Press [SLEEP] repeatedly to select the setting

(in minutes).

“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120”

^---------------- “OFF” (Cancel) (""""""}



≥ The remaining time is indicated on the unit’s display at every

minute except when other operations are performed.

“SLEEP 1” is always shown when only 1 minute remains.

≥ The play timer and sleep timer can be used together. The

sleep timer is always the main timer on the unit.

“MY SOUND”

(My sound)

“SOUND 1”, “SOUND 2”, or

“SOUND 3”.

(l below, “Saving the sound

settings”)

“PRESET EQ”

(Preset Equalizer)

“HEAVY” (heavy), “SOFT” (soft),

“CLEAR” (clear), “VOCAL”

(vocal), “NEWS” (news),

“CINEMA” (cinema) or “FLAT”

(flat/off).

“BASS” (Bass) or

“TREBLE” (Treble)

Adjust the level (j4 to i4).

“SURROUND”

(Surround)

“ON SURROUND” or “OFF

SURROUND”.

“D.BASS”

(Dynamic Bass)

“ON D.BASS” or “OFF D.BASS”.

Saving the sound settings

Setting the clock

Sleep timer

SC-DM502E-TQBJ2215_eng_pol_cze.book 14 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

You can set the timer so this unit turns on at a certain

time every day.

Preparation

Set the clock.

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [3, 4] to set the starting time (“ON TIME”)

and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].

4 Press [3, 4] to select the music source* and then

press [OK].

Turning the timer on

1 Prepare the selected music source and set the

desired volume.

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [3, 4] to select “SET” and then press [OK].

≥ “F” is displayed.

≥ To turn the timer off, select “OFF”.

4 Press [Í] to turn the unit to standby mode.

∫ To check the settings

Press [SETUP] repeatedly to select “TIMER ADJ” and

then press [OK].

(During standby, press [DISPLAY] twice.)



≥ The timer starts at a low volume and increases gradually to

the preset level.

≥ The timer comes on at the set time every day if the timer is

on.

≥ If you turn off the unit and turn it on again while a timer is in

operation, the timer will not stop at the end time.

* “CD”, “USB”, “DAB+” and “FM” can be set as the music

source.

Others

As a factory default, this unit will turn to standby mode

automatically if there is no sound and it is not being

used for approximately 20 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn the function on, select “ON” in step 2.

≥ This setting cannot be selected when radio is the source.

≥ When connected to a Bluetooth

device, the function does

not work.

When “SC-DM502” is selected from a paired

Bluetooth

device’s Bluetooth

menu, this unit will turn

on automatically from standby mode and establish a

Bluetooth

connection.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [3, 4] to select “ON” and then press [OK].



≥ To turn the function off, select “OFF” in step 2.

≥ The factory default is “OFF”. If this function is set to “ON”, the

standby power consumption will increase.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [O, N SELECT] repeatedly to select “CD”.

2 Press and hold [∫] on the unit and [O SELECT] on

the remote control until the unit’s display shows

“REMOTE 2”.

3 Press and hold [OK] and [O SELECT] on the

remote control for at least 4 seconds.



≥ To change the mode back to “REMOTE 1”, press

[O, N SELECT] to select “CD” and then repeat the steps 2

and 3 but replace [O SELECT] with [ ] on the remote

control.

Occasionally, Panasonic may release updated

software for this system that may add or improve the

way a feature operates. These updates are available

free of charge.

For more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

Press [SETUP] repeatedly to select “SW VER.” and

then press [OK].

The version of the installed software is displayed.

≥ Press [OK] to exit.

Play timer

Auto off function

Bluetooth

standby

Changing the unit and remote

control code

Software update

Checking the software version

SC-DM502E-TQBJ2215_eng_pol_cze.book 15 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Playable media

≥ A disc with the CD Logo.

≥ This unit can play back discs that conform to the CD-DA

format.

≥ This system can play back CD-R/RW with CD-DA or MP3

format content.

≥ The unit may not be able to play some discs due to the

condition of the recording.

≥ Before playback, finalise the disc on the device it was

recorded on.

≥ If the disc includes both MP3 and normal audio data

(CD-DA), the unit plays the type recorded in the inner part of

the disc.

≥ This unit cannot play files recorded using packet write.

≥ Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).



≥ Some CD-R/RW cannot be played because of the condition

of the recording.

≥ MP3 files are defined as tracks and folders are defined as

albums.

≥ This system can access up to:

– CD-DA: 99 tracks

– MP3: 999 tracks, 255 albums (including root folder)

≥ Recordings will not necessarily be played in the order you

recorded them.

≥ This unit does not guarantee connection with all USB

devices.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This unit supports USB 2.0 Full Speed.

≥ USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

≥ Supported format: Files with the extension “.mp3” or “.MP3”.

≥ Depending on how you create the files, they may not play in

the order you numbered them or may not play at all.



≥ Files are defined as tracks and folders are defined as

albums.

≥ This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Unit and media care

Pull out the AC mains lead from the outlet before

maintenance.

∫ Clean this unit with a soft, dry cloth

≥ When dirt is heavy, wring a wet cloth tightly to wipe the dirt,

and then wipe it with a dry cloth.

≥ When cleaning the speaker covers, use a fine cloth.

Do not use tissues or other materials that can fall apart.

Small pieces may get stuck inside the speaker cover.

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the

cloth’s instructions.

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or

labels (rented discs etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the

unit. If you discard this unit either by disposal or

transfer, then follow the procedure to return all the

settings to the factory defaults to delete the user

settings. (l 17, “To return all settings to the factory

defaults”)

Compatible CD

Compatible USB devices

DO DO NOT

SC-DM502E-TQBJ2215_eng_pol_cze.book 16 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Troubleshooting

Before requesting service, make the following checks.

If you are uncertain about some of the check points, or

if the solutions indicated in the following guide does not

resolve the issue, then consult your dealer for

instructions.

Cannot turn on the unit.

≥ After connecting the AC mains lead, wait about 10 seconds before

turning on the unit.

Humming heard during playback.

≥ If an AC mains lead or fluorescent lights are near the cords, then

keep other appliances and cords away from the cables.

The unit does not work.

≥ One of the unit’s safety devices may have been activated.

1 Press [Í/I] on the unit to switch the unit to standby.

≥ If the unit does not turn off, disconnect the AC mains lead

from the mains socket, reconnect it to the outlet after about

30 seconds. Then wait for about 10 seconds.

2 Press [Í/I] on the unit to switch it on. If the unit still cannot be

operated, consult the dealer.

The display panel lights up and changes

continuously in standby mode.

≥ Press and hold [∫] on the unit until “SDEMO OFF” is displayed.

The remote control does not work properly.

≥ The battery is depleted or inserted incorrectly. (l 6)

≥ Keep mobile phones and smart devices away from this unit.

Incorrect display or play does not start.

≥ Make sure that the disc is compatible with this unit. (l 16)

≥ There is moisture on the lens. Wait for about an hour and then try

again.

No response when [1/;] is pressed.

≥ Disconnect the USB device and then reconnect it. Alternatively,

turn the unit off and on again.

The USB drive or its contents cannot be read.

≥ The USB drive format or its contents is/are not compatible with the

unit (l 16).

≥ The USB host function of this product may not work with some

USB devices.

Slow operation of the USB flash drive.

≥ Large file size or high memory USB flash drive takes longer time

to read.

The elapsed time displayed is different from the

actual play time.

≥ Copy the data to another USB device or backup the data and

reformat the USB device.

DAB/DAB+ reception is poor.

≥ Keep the antenna away from computers, televisions, other cables

and cords.

≥ Use an outdoor antenna.

If noise is excessive during FM reception.

≥ Change the audio to be output as monaural.

1 Press [PLAY MENU] repeatedly to select “FM MODE”.

2 Press [3, 4] to select “MONO” and then press [OK].

The sound becomes monaural.

≥ To cancel, select “STEREO” or change the frequency.

In normal circumstances, select “STEREO”.

Static or noisy reception is heard while listening to

a radio broadcast.

≥ Confirm the antenna is properly connected. (l 6)

≥ Adjust the position of the antenna.

≥ Try to keep a certain amount of distance between the antenna and

AC mains lead.

≥ Try using an outdoor antenna if there are buildings or mountains

nearby.

≥ Turn the TV or other audio players off or separate it from this unit.

≥ Keep mobile phones away from this unit.

Pairing cannot be completed.

≥ Check the Bluetooth

device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or the registration has

been replaced. Try re-pairing the device. (l 8)

≥ This unit might be connected to a different device. Disconnect the

other device and try re-pairing the device. (l 8)

≥ If “MODE 2” is selected in “LINK MODE”, select “MODE 1”. (l 8)

≥ If the problem persists, turn the unit off and on, then try again.

The device is connected, but audio cannot be

heard through this unit.

≥ For some built-in Bluetooth

devices, you have to set the audio

output to “SC-DM502” manually. Read the operating instructions

for the device for details.

To return all settings to the factory defaults

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the settings.

1 Disconnect the AC mains lead. (Wait for at least

30 seconds before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

unit, reconnect the AC mains lead.

≥ Keep holding down [Í/I] until “---------” appears on the

display.

3 Release [Í/I].



≥ The settings are returned to the factory defaults. It is

necessary to set the settings again.

General

Remote control

Disc

USB

Radio

Bluetooth

SC-DM502E-TQBJ2215_eng_pol_cze.book 17 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

The sound is interrupted.

≥ The device is out of the 10 m communication range. Place the

Bluetooth

device closer to this unit.

≥ Remove any interference between this unit and the device.

≥ Other devices that use the 2.4 GHz frequency band, such as

wireless routers, microwaves, cordless phones, etc. are

interfering. Place the Bluetooth

device closer to this unit and

distance it from the other devices.

≥ Select “MODE 1” for stable communication. (l 8)

The following messages or service numbers may

appear on the unit’s display.

“--:--”

≥ You plugged the AC mains lead in for the first time or there was a

power failure recently. Set the time (l 14).

“ADJUST CLOCK”

≥ Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

≥ Play timer is not set. Adjust the play timer accordingly.

“AUDIO UNSUPPORTED”

≥ The signal format or frequency is not supported.

≥ This system does not support bitstream signals. Change the

digital audio output setting on the external equipment to PCM.

≥ This system supports sampling frequencies of 32 kHz, 44.1 kHz,

48 kHz and 96 kHz. Select only the supported sampling

frequencies on the connected equipment.

≥ Try connecting the external equipment by using the auxiliary input.

“AUTO OFF”

≥ The unit has been left unused for about 20 minutes and will shut

down within a minute. Press any button to cancel it.

“ERROR”

≥ Incorrect operation is performed. Read the instructions and try

again.

“F” / “F” (“  ” stands for a number.)

≥ There is a problem with this unit.

Disconnect the AC mains lead from the mains socket, reconnect it

to the outlet after about 30 seconds. Wait for about 10 seconds,

then turn on the unit. If the problem still persists, disconnect the

AC mains lead and consult your dealer.

“LINKING”

≥ This system is trying to connect to the last connected Bluetooth

device when “BLUETOOTH” is selected.

“NO DEVICE”

≥ The USB device is not inserted correctly. Read the instructions

and try again (l 7).

“NO DISC”

≥ Insert the disc to be played (l 7).

“NO PLAY”

≥ Examine the content. You can only play supported format. (l 19)

≥ The files in the USB device can be corrupted. Format the USB

device and try again.

≥ The unit may have a problem. Turn the unit off and then on again.

“NO PRESET”

≥ There are no preset DAB/DAB+ stations to select. Preset some

channels. (l 10)

“NO SIGNAL”

≥ This station cannot be received. Check your antenna (l 6).

“NOT SUPPORTED”

≥ You have connected an unsupported USB device.

“PLAYERROR”

≥ You played an unsupported file. The system will skip that track

and play the next one.

“READING”

≥ The unit is checking the “CD”/“USB” information. After this display

has disappeared, start operating.

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes. Change

the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK] and

[ ] on the remote control for at least 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and

[O SELECT] on the remote control for at least 4 seconds.

“SCAN FAILED”

≥ Stations are not receivable. Check your antenna and try Auto

scanning (l 10).

If “SCAN FAILED” is still displayed find the best signal reception

with the “MANUAL SCAN” tuning function. (l 11)

“SOUND NOT SET” (“  ” stands for a number.)

≥ There is no saved setting under the selected sound setting

number. Save the sound settings. (l 14)

“USB OVER CURRENT ERROR”

≥ The USB device is drawing too much power. Disconnect the USB

device, turn the unit off and then on again.

≥ Check the connection, it may be caused by a faulty USB cable.

“VBR”

≥ The system cannot show the remaining play time for variable bit

rate (VBR) tracks.

“WAIT”

≥ This is displayed, for example, when this unit is turning off.

Messages

SC-DM502E-TQBJ2215_eng_pol_cze.book 18 ページ２０２０年１月１１日　土曜日　午前９時３２分

ENGLISH

TQBJ2215

Specifications



≥ Specifications are subject to change without notice.

≥ Mass and dimensions are approximate.

≥ Total harmonic distortion is measured by a digital spectrum

analyzer.

*1: No device is connected to the USB port before turning to

standby mode.

*2: MPEG-1 Layer 3, MPEG-2 Layer 3

∫ GENERAL

Power consumption 25 W

Power consumption in standby mode

(When “BLUETOOTH STANDBY” is “OFF”)

Approx. 0.2 W

(When “BLUETOOTH STANDBY” is “ON”)

Approx. 0.3 W

Power supply AC 220 V to 240 V, 50 Hz

Dimensions (WkHkD)

400 mmk127 mmk219 mm

Mass Approx. 3.9 kg

Operating temperature range 0 oC to r40 oC

Operating humidity range

35 % to 80 % RH (no condensation)

∫ AMPLIFIER SECTION

Output power

RMS Output Power

Front Ch (both ch driven)

20 W per channel (8 ≠), 1 kHz, 10 % THD

Total RMS power 40 W

∫ TUNER SECTION

Preset Memory FM 30 stations

Frequency Modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 ≠ (unbalanced)

∫ DAB SECTION

DAB memories 20 channels

Frequency Band (Wavelength)

Band III 5A to 13F

(174.928 MHz to 239.200 MHz)

Sensitivity *BER 4x10

-4

Min Requirement s98 dBm

DAB External Antenna

Terminal F - Connector (75 ≠)

∫ DISC SECTION

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3

)

Pick up

Wavelength 790 nm (CD)

NORSK (NORWAY)

Bølgelengde 790 nm (CD)

Laserstyrke Ingen farlig stråling sendes ut

∫ SPEAKER SECTION

Speaker unit(s)

Full Range 8cmconetypek2

∫ TERMINAL SECTION

USB Port

USB Port power DC OUT 5V1.5A

USB Standard USB 2.0 full speed

Media file format support MP3

(¢.mp3)

Audio support format

MP3

Sampling frequency 32/44.1/48 kHz

Audio word size 16 bits

Channel count 2ch

USB device file system FAT12, FAT16, FAT32

Digital audio input

Optical digital input Optical terminal

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz, 96 kHz

Audio format PCM

Analog audio input

Audio input Pin jack

∫ Bluetooth

SECTION

Version Bluetooth

Ver.4.2

Class Class 2

Supported Profiles A2DP, AVRCP

Frequency band 2.4 GHz band FH-SS

Operation Distance 10 m Line of sight

Supported Codec SBC

SC-DM502E-TQBJ2215_eng_pol_cze.book 19 ページ２０２０年１月１１日　土曜日　午前９時３２分

TQBJ2215

Spis treści

Akcesoria......................................................... 20

Zasady bezpieczeństwa ................................. 21

Licencja ........................................................... 22

Instrukcja sterowania..................................... 23

Podłączenia.....................................................24

Korzystanie z pilota ........................................ 24

Odtwarzanie DEMO......................................... 24

Wkładanie nośników ...................................... 25

Informacje o Bluetooth

................................. 25

Operacje Bluetooth

....................................... 26

Przyciski odtwarzania z nośników ................ 27

Słuchanie DAB/DAB+ ..................................... 28

Słuchanie radia FM......................................... 30

Słuchanie muzyki na urządzeniach

zewnętrznych .................................................. 31

Regulacja dźwięku.......................................... 32

Zegar i timer .................................................... 32

Inne .................................................................. 33

Nośniki, które mogą być odtwarzane ........... 34

Konserwacja urządzenia i nośników ............ 34

Usuwanie usterek ........................................... 35

Dane techniczne ............................................. 37

Akcesoria

Sprawdź dostarczone akcesoria przed rozpoczęciem

użytkowania urządzenia.

Informacje dotyczące opisów w niniejszej

instrukcji obsługi

≥ Odniesienia do stron są oznaczone jako “l ±±”.

≥ O ile nie wskazano inaczej, opisane czynności

wykonywane są za pomocą pilota, jednak można je

wykonać również na urządzeniu głównym, jeżeli elementy

sterujące są takie same.

∏ 1 Pilot zdalnego sterowania

(N2QAYB001215)

∏ 1 Bateria do pilota zdalnego sterowania

∏ 2 przewody zasilania

∏ 1 antena wewnętrzna DAB



≥ Należy używać odpowiedniego dla gniazdka elektrycznego

przewodu zasilania, który znajduje się na wyposażeniu.

≥ Nie używaj kabla zasilającego do zasilania innych

produktów.

≥ Numery produktów podane w niniejszej instrukcji obsługi

według stanu na grudzień 2019. Mogą ulec zmianie.

SC-DM502E-TQBJ2215_eng_pol_cze.book 20 ページ２０２０年１月１１日　土曜日　午前９時３２分

Stránka sa načítava ...

1 / 1

Panasonic SCDM502E Návod na používanie

Značka: Panasonic

Model: SCDM502E

Kategória: Domáce audio súpravy

Typ: Návod na používanie

Stiahnite si PDF

Pridajte do záložiek

správa

V iných jazykoch

polski: Panasonic SCDM502E Instrukcja obsługi

Panasonic SCDM502E Návod na používanie

Panasonic SCDM502E Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty