Godox TT685II-C Používateľská príručka

TT685II-C

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

2

English

3 – 42

Čeština

43 – 82

Slovenčina

83 – 122

Magyar

123 – 162

Deutsch

163 – 202

3

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4

Foreword

Thank you for purchasing this product.

This TT685IIC camera flash applies to Canon EOS series cameras and is compatible wit E-

TTL II autoflash. With this E-TTL II compatible flash, your shooting will become simpler.

You can easily achieve a correct flash exposure even in complex light-changing

environments. This camera flash features:

• Approx. GN60 (ISO 100, @200mm), 81 steps from 1/1 to 1/256.

• Fully support Canon E-TTL II camera flash. Workable as Transmitter or Receiver

unit in a wireless flash group.

• Use dot-matrix LCD panel to make clear and convenient operations.

• With built-in 2.4GHz wireless remote system to support transmitting and

receiving.

• Provided multiple functions, include HSS (up to 1/8000s) FEC, FEB, etc.

• Stable consistency and color temperature with good even lighting.

• Support with firmware upgrade.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.

• Do not disassemble. Should repairs become necessary, this product must be sent

to an authorized maintenance center.

• Keep out of reach of children.

Stop using this product if it breaks open due to extrusion, falling or strong hit.

Otherwise, electric shock may occur if you touch the electronic parts inside it.

• Do not fire the flash directly into the eyes (especially those of babies) within short

distances. Otherwise, visual impairment may occur.

• Do not use the flash unit in the presence of flammable gases, chemicals, and

other similar material. In certain circumstance, these materials may be sensitive

to the strong light emitting from this flash unit and fire or electromagnetic

interference may result.

• Do not leave or store the flash unit if the ambient temperature reads over 50°C.

Otherwise the electronic parts may be damaged.

• Turn off the flash unit immediately in the event of malfunction.

5

Name of Parts

Body

1. Flash Head

2. Built-in Wide Panel

3. Wireless Sensor

4. Focus Assist Beam

5. Sync Cord Jack

6. Type-C USB Port

7. Battery Cover

8. Hotshoe

9. LCD Panel

10. Hotshoe Fixing Buckle

11. External Charging Port

6

Control Panel

11. <MENU> Flash Menu Button/Locking Button

12. Wireless Selection Button

13. Select Dial

14. Set Button

15. ON/OFF Power Switch

16. Test Button/Flash Ready Indicator

17. <ZOOM> Focus Length Setting

18. <MODE> Mode Selection Button

19. Lock Setting

20. <+/->Power Output

21. Function Button 1

22. Function Button 2

23. Function Button 3

24. Function Button 4

7

LCD Panel

E-TTL Autoflash

Zoom: zoom display

• The display will only show the settings currently applied.

• The functions displayed above function button 1 to 4, such as SYNC and

<A/B/C/D>, change according to settings status.

• The LCD panel will lighten on when buttons and dials are operated.

Automatic

Manual

ETTL: E-TTL II

autoflash

Flash exposure

compensation

Flash exposure

compensation amount

Focus length

High-speed sync

Second curtain

sync

Distance indicator

Effective

Flash Range

8

M Manual Flash

Multi Flash

Radio Transmission Shooting

• Transmitter Unit (TX)

M: Manual flash

Manual flash output

Multi: Stroboscopic flash

Number of flashes

Flash frequency

Flash mode

: Radio transmission

wireless shooting

Transmitter unit

flash ON

: Transmitter unit

flash OFF

Firing group

Channel

9

• Receiver Unit (RX)

LCD Panel in Three Modes

Attached to the Camera

2.4G Radio Transmission: As a Transmitter Unit

2.4G Radio Transmission: As a Receiver Unit

: Receiver icon

Receiver

10

What’s in the Box of TT685IIC Kit?

Flash Unit

Mini Stand

Protection Case

Instruction Manual

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately,

so as to achieve best photography effects: XProC, X2T-C & X1C TTL wireless flash trigger,

etc.

11

Loading and Unloading the Battery

To unload the battery hold down the battery press compartment and push the battery

downwardly to take it out.

Put 4 batteries in with the correct polarity after opening the battery compartment, then

close and push it to the top.

Tips: When collocated with the optional Godox Flash Power Box PB960, TT685IIC will

have more flash times, shorter recycle time and longer duration.

12

Attaching to a Camera

Attach the Camera Flash

Rotate the hotshoe fixing

buckle to the left and insert

the camera flash into the

camera’s hotshoe.

Secure the Camera Flash

Rotate the hotshoe fixing

buckle to the right until it

locks up.

Detach the Camera Flash

Press the button and

rotate the hotshoe fixing

buckle to the left until it is

loosened.

Power Management

Use ON/OFF Power Switch to power the flash unit on or off. Turn off it will not be used

for an extended period of time. Setting as transmitter flash, it will turn the power off

automatically after a certain period (approx. 90 seconds) od idle use. Pressing the

camera shutter halfway or pressing any flash button will enter sleep mode after certain

period (adjustable, 60 minutes by default) of idle use. Pressing any flash button will wake

it up.

Disabling Auto Power Off function is recommended when the flash is used off

camera. (C.Fn-STBY)

Receiver Auto Power Off Timer is set to 60 minutes by default. Another option “30

minutes” is available (C.Fn-RX STBY)

Flash Mode—E-TTL AutoFlash

This flash has three flash modes: E-TTL, Manual (M), and Multi (Stroboscopic). In E-TTL

mode, the camera and the flash will work together to calculate the correct exposure for

the subject and the background. In this mode, multiple TTL functions are available: FEC,

FEB, FEL, HSS, second curtain sync, modeling flash, control with the camera’s menu

screen.

13

*Press <MODE> Mode Selection Button and three flash modes will display on the LCD

panel one by one with each pressing.

ETTL Mode

Press <MODE> Mode Selection Button to enter E-TTL mode. The mode LCD panel will

display.

• Press the camera release button halfway to focus. The aperture and effective

flash range will be displayed in the viewfinder.

• When the shutter button is fully pressed, the flash will fire pre-flash that the

camera will use to calculate exposure and flash output the instant before the

photo is taken.

FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3 stops. It is useful in situations

where minor adjusting of the TTL system is needed based on the environment.

FEC Setting:

Press the <+/-> button.

The < > and flash

exposure compensation

amount will be highlighted

on the LCD panel.

Set the flash exposure

compensation amount.

• Turn the Select Dial

to set the amount.

• “0.3” means 1/3

step, “0.7” means

2/3 step.

• To cancel the flash

exposure

compensation, set

the amount to “+0”.

Press Set Button again to

confirm the setting.

FEB: Flash Exposure Bracketing

You can take three flash shots while automatically changing the flash output for each

shot from -3 to +3 in 1/3rd stops. The camera will record three images with different

exposures: one exposed according to camera calculations, one over-exposed and

another under-exposed. Over and under exposure amount is user adjustable. This

function helps get correct exposure especially in shooting moving objects or when

environmental lights are complex.

14

Press function button 3

<FEB icon> and the

exposure will be

highlighted on the LCD

panel.

Set the flash exposure

compensation amount.

• Turn the Select Dial

to set amount.

• “0.3” means 1/3

step, “0.7” means

2/3 step.

Press Set Button again to

confirm the setting. Then

your FEC and FEB settings

are displayed on the LCD

panel.

• FEB will be cancelled after three photos are taken.

• For best result, set the camera drive mode to “single” and ensure the flash is

ready before shooting.

• FEB can be used with FEC and FEL.

You can prevent the FEB from being cancelled automatically after three

photos are taken. (C.Fn-FEB ACL)

FEL: Flash Exposure Lock

FEL can lock the correct flash exposure setting for any part of the scene.

With <ETTL> displayed on the LCD panel, press the camera’s <FEL> button. If the camera

does not have the <FEL> button, press <*> button.

1. Focus the subject

2. Press the <FEL> button.

• Aim the subject at the center of the viewfinder and press <FEL> button.

• The camera flash will fire a preflash and the required flash output for the subject

in retained in memory.

• “FEL” will display on the viewfinder for 0.5s.

• The camera flash will fire a preflash and lock the flash exposure setting once the

<FEL> button is pressed.

15

• If the subject is too far away and underexposure, the < > icon will blink in the

viewfinder. Move closer to the subject and try the FE lock again.

• If <ETTL> is not displayed on the LCD panel, FE lock cannot be set.

• If the subject is too small, FE lock might not be very effective.

High-Speed Sync

High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter

speeds. This is convenient when you want to use aperture priority for fill-flash portraits.

Press Function Button 2 <SYNC> so that

< > is displayed.

Check that < > is displayed in the

viewfinder.

• If you set a shutter speed that is the same as or slower than the camera’s

maximum flash sync speed, < > will not be displayed in the viewfinder.

• With high-speed sync, the faster the shutter speed the shorter the effective flash

range.

• To return to normal flash, press <SYNC> button again. The < > will disappear.

• Multi flash mode cannot be set in high-speed sync mode.

• Over-temperature protection may be activated after 30 consecutive high-speed

sync flashes.

16

Second-Curtain Sync

With a slow shutter speed, you can create a light train following the subject. The flash

fires right before the shutter closes.

Press function button 2 <SYNC> button so that < > is displayed on the LCD panel.

M: Manual Flash

The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop

increments. To obtain a correct flash exposure, use a hand-held flash meter to

determine the required flash output.

Press <MODE> button so

that <M> is displayed.

Turn the Select Dial to

choose a desired flash

output amount.

Press Set button again to

confirm the setting.

Optic S1 Secondary Unit Setting

In M manual flash mode, press <S1/S2> button so that this flash can function as an optic

S1 secondary flash with optic sensor. With this function, the flash will fire synchronously

when the main flash fires, the same effect as that by the use of radio triggers. This helps

create multiple lighting effects.

17

Optic S2 Secondary Unit Setting

Press <S1/S2> button so that this flash can also function as an optic S2 secondary flash

with optic sensor in M manual flash mode. This is useful when cameras have pre-flash

function. Whit this function the flash will ignore a single “preflash” from the main flash

and will only fire in response to the second, actual flash from the main unit.

• S1 and S2 optic triggering is only available in M manual flash mode.

Multi: Stroboscopic Flash

With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture

multiple images of a moving subject in single photograph.

You can set the firing frequency (number of flashes per sec. expressed as Hz), the

number of flashes, and the flash output.

Press <MODE> button so that <MULTI> is displayed.

Set the flash frequency and flash times.

• Press the Function Button <Times> to select the flash times. Turn the Select Dial

to set the number.

• Press the Function Button <Hz> to select the flash frequency. Turn the Select Dial

to set the number.

18

Turn the Select Dial to choose desired flash output. After you finish the setting, press Set

Button and all the settings will be displayed.

Calculating the Shutter Sped

During stroboscopic flash, the shutter remains open until the firing stops. Use formula

below to calculate the shutter speed and set it with the camera.

Number of Flashes / Flash Frequency = Shutter Speed

For example, it the number of flashes is 10 and the firing frequency is 5 Hz, the shutter

speed should be at least 2 seconds.

To avoid overheating and deteriorating the flash head, do not use stroboscopic flash

more than 10 times in succession. After 10 times, allow the camera flash to rest for at

least 15 minutes. If you try to use stroboscopic flash more than 10 times in succession,

the firing might stop automatically to protect the flash head. If this camera happens,

allow at least 15 minutes rest for the camera flash.

• Stroboscopic flash is most effective with a highly reflective subject against a dark

background.

• Using a tripod and remote control is recommended.

• A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.

• Stroboscopic flash can be used with “bulb”

• If the number of flashes is displayed as “--”, the firing will continue until the

shutter closes or the battery is exhausted. The number of flashes will be limited

ah shown by the following table:

19

Maximum Stroboscopic Flashes

Flash Output / Hz

20

Wireless Flash Shooting: Radio (2.G) Transmission

• When the camera’s shooting mode is set to a fully automatic mode or an Image

Zone mode, the operation in this chapter are no available. Set the camera’s

shooting mode to P/Tv/Av/M/B (Creative Zone Mode)

• The TT685IIC attach to the camera is called the transmitter unit, and a TT685IIC

that is wirelessly controlled is called the receiver unit.

• You can also wirelessly control the TT685IIC set as the receiver unit with the

transmitter X1T-C (sold separately). For details on setting the transmitter unit

functions, see the transmitter’s instructions.

Using a flash (transmitter/receiver) with a radio transmission wireless shooting function

make it easy to shoot with advanced wireless multiple flash lighting, in the same way as

E-TTL II autoflash shooting.

The basic relative position and operation range are shown in the picture. You can then

perform wireless E-TTL II autoflash shooting just by setting the transmitter unit to

<ETTL>.

Positioning and Operation Range (Example of wireless flash shooting)

• Autoflash Shooting with One Receiver Unit

• Use the supplied mini stand to position the Receiver unit.

• Before shooting, perform a test flash and test shooting.

• The transmission distance might be shorter depending on the conditions such as

positioning of Receiver units, the surrounding environment and whether

conditions.

TRANSMITTER

RECEIVER

Transmission distance is

about 100m.

Stránka sa načítava...

Godox TT685II-C Používateľská príručka

Godox TT685II-C Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty