Godox AD300Pro Outdoor Flash Používateľská príručka

AD300Pro

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

2

English

3 – 29

Čeština

30 – 56

Slovenčina

57 – 83

Magyar

84 – 110

Deutsch

111 – 137

3

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4

Foreword

Before using this product

Please read this user manual carefully in order to ensure your safety and the proper

operation of this product. Keep for future reference.

Thank you for purchasing a GODOX product.

AD300Pro Outdoor Flash has strong power with light weight, compact size, and great

portability. Equipped with rechargeable and long-life lithium battery, AD300Pro supports

various of accessories by replacing different adapter rings.

Builted-in Godox 2.4G wireless X system and fully support of TTL function, your shooting

process will become smoother using AD300Pro. Easily achieve a correct flash exposure

even in complex light-changing environment.

The AD100 Pro offers:

• Compatible wireless TTL system: Fully support TTL/M/Multi functions of Canon,

Nikon, Sony, Fuji, Olympus, Panasonic, and Pentax cameras. Workable as Slave

unit in a wireless flash group.

• Lightweight and portable: up to 300Ws

• Hight-quality VA panel: with clear and convenient operation.

• Built-in 2.4G wireless transmission: with all-in-one functions and 100 meters

further transmission.

• Battery pack: Large-capacity power supply (lithium, 14.4V/2600mAh), 0.01-1.5s

recycling and over 320 full power flashes.

• Wireless control: With built-in Godox 2.4G wireless X system to achieve TTL

control. Godox FT-16 flash trigger can also be used to wirelessly adjust flash

power level and trigger the flash. AD300Pro has 3.5mm sync cord jack to achieve

various sync triggering mode.

• Power adjusts from full power to 1/256 in 81 levels.

• Change within ± 100K over the entire power range in color temperature

mode.

• 1/8000s high-speed sync flash, high-speed sync triggering.

The powerful and portable AD300Pro meets the demands of freelance

commercial photographers, photojournalists wedding and beach portraiture

shooters, event and backpack photographers, photograph enthusiasts, etc.

5

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.

• Do not disassemble. Should repairs become necessary, this product must be sent

to and authorized maintenance center.

• Keep out of reach of children.

• Stop using this product if it breaks open due to extrusion, falling or strong hit.

Otherwise, electric shock may occur if you touch the electronic parts inside it.

• Do not fire the flash directly into the eyes (especially those of babies) within short

distances. Otherwise, visual impairment may occur.

• Do not use the flash unit in the presence of flammable gases, chemicals and

other similar materials. In certain circumstance, these materials may be sensitive

to the strong light emitting from this flash unit and fire electromagnetic

interference may result.

• Do not leave or store the flash unit in the ambient temperature reads over 50°C.

Otherwise the electronic parts may be damaged.

• Turn off the flash unit immediately in the event of malfunction.

• The light source of thus luminaire is not replaceable, when the light source

reaches its end of life the whole luminaire shall be replaced.

• Minimum distances from flammable materials: 10cm.

6

Name of Parts

Body:

Reflector

Reflector Locking

Button

Light Body

Radiator

3.5mm Sync Cord Jack

Type-C USB Firmware Upgrade

Port

Display Screen

Light Sensor

MODE Mode Sekection

Button

MENU Button

RST Reset Button

(MENU + Modeling Button

Modeling Lamp Button

SET Button & Select

Dial

Battery

GR/CH Group/Channel

Button

Wireless/High-speed

Selection Button

Test Button

Power Switch

Battery Release

Button

Battery Compartment

7

1/4“ Mounting Hole

LED Light

Flash Tube

Glass Protection Cover

Locking Button

Glass Protection

Cover

8

VA Panel

• The display will only show settings currently applied.

• The functions displayed above function buttons 1 to 4, such as and ,

change according to settings status.

• When a button or dial is operated, the AV panel illuminated.

M Manual Flash

TTL/M/Multo

Color Temperature Mode

: HHS

Battery Level

Flash Exposure

compensation amount

sec

min

Flash frequency

Flash hight temperature

Modeling lamp (LED)

Standby

S1/S2

Channel

Wireless

Group

C.Fn

t0.1

Mask

Time

Beeper

M: Manual flash

Manual Flash Output

9

Multi Flash

Radio Transmission Shooting

S1/S2

Multi: Stroboscopic flash

Number of flashes

Flash frequency

Channel

M Mode

T0.1

S1

Radio transmission

wireless shooting

Group

S1

C.Fn-F2

10

Included Accessories

1. Light body

2. Flash tube

3. Glass protection cover

4. Reflector

5. AD-E2 bracket

6. Battery

7. Charger

8. Portable bag

9. Instruction manual

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately,

so as to achieve best photography effects: Xpro, X2 and X1 Wireless Flash Trigger,

Adapter Ring Holder, Bowens/Elinchrom/Comet mount adapter ring, Barn Adapter

Rings, Softbox, Beauty Dish, Fold up umbrella, Snoots, Light stand, etc.

11

Replacing Adapter Rings and Accessories

Remove the reflector or

other accessories from the

flash head.

Install the first half of

adapter holder into the

fixing slot. Then install

another half to form a

circle.

Match the Bowens mount

or other adapter ring to

the adapter holder.

Tighten the four screws.

Install the accessories of different

mounts. If needed to use new Godox-

mount accessories after installing the

adapter ring of another brand, just install

them directly.

Attaching Flash Tube

Install Flash Tube

Remove the reflector or

other accessories from the

flash head.

Match the flash tube in the

Tube Socket. Push the flash

tube in until it is securely

seated into the socket.

Firstly, lock tightly spring 1

and press down the spring

2 and 3 simultaneously.

Then, install the glass

protection cover.

12

Detach Flash Tube

Pull out the glass protection cover from

the spring 2 and 3 before 1.

Pinch the flash tube holder with your

thumb and forefinger and pull out the

tube upwards.

Lithium Battery

Features

1. This flash unit uses Li-ion polymer battery which has long runtime. The Available

charge-and-discharge times are 500.

2. It is reliably safe. The inner circuit is against overcharge, over discharge,

overcurrent, and short circuit.

3. Take only 2.5 hours to fully charge the battery by using the standard battery

charger.

Cautions

• Do not short circuit

• Do not expose to rain or immerse into water. This battery is not waterproof.

• Keep out of reach of children.

• No over 24 hours continuous charging.

• Store in dry, cool ventilated places.

• Do not put aside or into fire.

• Dead batteries should be disposed according to local regulations.

• Long-time not to use, please charge it to 60% and then placed.

• It is recommended to fully recharge the battery every three months.

Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check the battery level

indication on the AV panel to see the remaining battery level.

13

Battery Level

Indication on the VA

panel

Meaning

3 grids

Full battery

2 grids

Medium battery

1 grid

Low battery

Blank grid

Lower battery, please recharge it

Blinking

The battery level is going to be used out immediately. And

the flash will auto power off in 1 minute.

Note: Please recharge the battery as soon s possible (within

10 days). Then, the battery can be used or be placed for

long period.

Power Management

ON/OFF Power Switch controls the on/off of the flash unit, turn off the power pack if the

flash unit will not be used for an extended period. The product design of power supply

with automatic hibernation feature. When unattended operation for a long time

(approx. 30/60/90 minutes), the flash will automatically standby.

Disable Auto Power standby function is recommended when the flash is

used of camera. (C.Fn-F3, Page 39)

Modeling Lamp

1. Power on/off the modelling lamp: short press the < > to control the modeling

lamp’s on or off.

2. Setting: long press the < > to enter modeling lamp setting.

Brightness setting: Press the SET button and the brightness value is blinking. Turn

the select dial to change the brightness value from 1 to 10 level.

Color temperature setting: press the SET button and the color temperature value

is blinking. Turn the select dial to change to color temperature value from 300K

to 600K (±500K)

14

Wireless Flash Mode

AD300Pro can only be set as slave unit (receiver end). Press the menu button to enter.

C.Fn-WL to switch the radio transmission function.

Wireless Mode

Flash Mode

OFF

M/Multi

Radio Transmission

TTL/M/Multi

Flash Mode – TTL Auto flash

This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode,

the camera and the flash will work together to calculate the correct exposure for the

subject and the background. In this mode, multiple TTL functions are Available: FEC, FEB,

FEL, HSS, second curtain sync, modeling flash control with the camera’s menu screen.

Press <MODE> Mode selection Button and three flash modes will display on the VA

panel one by one with each pressing.

TTL Mode

Press <MODE> Mode Selection Button to enter TTL mode. The VA panel is displayed

<TTL>.

Hight-Speed Sync

Hight Speed Sync (FP flash) enables the flash to synchronize with all camera shutter

speeds. This is convenient when you want to use aperture priority for fill-flash portraits.

Long Press Wireless Button < > for 2

seconds so that < > is displayed.

Please use the X2 series transmitter to

trigger.

• With high-speed sync, the faster the shutter speed, the shorter the effective flash

range.

• Multi flash mode cannot be set in hight-speed sync mode.

• Over-temperature protection may be activated after 20 consecutive high-speed

sync flashes.

15

Flash Mode – M: Manual Flash

The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th step or 1

step increments. To obtain a correct flash exposure, use a hand-held flash meter to

determine the required flash output.

Press <MODE> button so that <M> is

displayed.

Turn the Select Dial or press the SET

button and turn the Select Dial

simultaneously to set the flash output.

The flash output will be adjustable from

1/10th increasment or 1 step increasment

by turning the Select Dial directly or

pressing the SET button and turn the

Select Dial simultaneously.

Optic S1 Secondary Unit Setting

In M manual flash mode, press the <MENU> button to enter C.FN-F2 to choose S1

function, so that this flash can function as an optic S1 secondary flash with optic sensor.

With this function, the flash will fire synchronously when the main flash fires, the same

effect as that by the use of radio triggers. This helps create multiple lighting effects.

Optic S2 Secondary Unit Setting

Press the <MENU> button to enter. C.FN-F2 to choose S2 function, so that this flash can

also function as an optic S2 secondary flash with optic sensor in M manual flash mode.

This is useful when cameras have pre-flash function. With this function, the flash will

ignore a single “pre-flash” from the main flash and will only fire in response to the

second, actual flash from the main unit.

S1 and S2 optic triggering is only available in M manual flash mode.

16

Display Flash Duration

Flash duration refers to the length of time that from flash’s firing to reach the half peek

at maximum. The half peak at maximum is usually expressed at t=0.5. In order to

provide the photographer with more concrete data, this product adopts t=0.1. The

difference between t=0.5 and t=0.1 is shown in the following picture.

Display Flash Duration Operation:

1. Press the <MENU> button to enter C.FN function.

2. Adjust the Select Dial to F6, the t0.1 icon will be displayed on the VA panel.

3. Press <SET> button to enter the adjustment condition.

4. Turn the Select Dial to choose the ON/OFF.

• The flash duration will only be displayed on the AV pane in M mode.

17

Stable Color Temperature Function

When use this function, the color temperature changes within ±100K over the entire

power range: enter MENU C.Fn-08 and set it as ON, which means the color temperature

function is turned on. When adjusting the power output from high to low in M mode,

Flash Ready Indicator will blink (the beeper will alarm for 1 minute). Now press the Test

Button to discharge, and the flash can be used as normal.

• This function can only be supported in M non-high-speed mode.

Flash Mode – Multi: Stroboscopic Flash

With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture

multiple images of a moving subject in a single photograph. You can set the firing

frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the

flash output.

Press <MODE> button so that <MULTI> is

displayed.

Turn the Select Dial to choose a desired

flash output.

18

Set the flash frequency and flash times.

• Press <SET> button to select the flash frequency. Turn the Select Dial to set the

number.

• Press <SET> button to select the flash times. Turn the Select Dial to set the

number.

• After finishing the setting, press <SET> button and all the settings will be

displayed.

Calculating the Shutter Speed

During stroboscopic flash, the shutter remains open until the firing stops. Use the

formula below to calculate the shutter speed and set it with the camera.

Number of Flashes / Flash Frequency = Shutter Speed

For example, if the number of flashes is 10 and the firing frequency is 5Hz, the shutter

speed should be at least 2 seconds.

To avoid overheating and deteriorating the flash head, do not use stroboscopic flash

more than 10 times in succession. After 10 times, allow the camera flash to rest for at

least 15 minutes. If you try to use the stroboscopic flash more than 10 times in

succession, the firing might stop automatically to protect the flash head. If this happens,

allow at least 15 minutes rest for the camera flash.

• Stroboscopic flash is most effective with a highly reflective subject against a dark

background.

• Using a tripod and remote control is recommended.

• A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.

• Stroboscopic flash can be used with “buLb”.

• If the number of flashes is displayed as “--” the firing will continue until the

shutter closes or the battery is exhausted. The number of flashes will be limited

as shown by the following table.

19

Maximum Stroboscopic Flashes

Flash Output / Hz

Wireless Flash Shooting: Radio (2.4G) Transmission

AD300Pro adopts Godox 2.4G wireless X system, which has good compatibility with

other products of our company. As Slave unit, AD300Pro is automatically compatible

with Canon/Nikon/Sony TTL system according to the master unit. Nikon cameras (use

X1T-N), Canon cameras (use X1T-C) and Sony cameras (use X1T-S) can use one or more

AD300Pro-TTL flashes simultaneously.

Wireless Settings

Press the wireless selection button to switch wireless function ON/OFF. Turn the

wireless function on, the < > icon will be displayed on the VA panel. When using the FT-

16 remote control or other trigger, please turn off the wireless function.

20

Setting the Communication Channel

If there are other wireless flash systems nearby, you can change the channel IDs to

prevent signal interference. The channel IDs of the master unit and the Slave unit(s)

must be set to the same.

Long press the <GR/CH>

Button for 2 seconds, so

that the icon will be

displayed on the VA panel.

Turn the Select Dial to

choose a channel ID from

1 to 32.

Press the <SET> button to

confirm.

Setting the Communication Group

Short press the <GR/CH> button to choose group ID from A to E.

Wireless ID Settings

Press the MENU button to enter C.Fn to choose OFF or any figure from 01-99.

Note: This can only be used when the master unit possesses the wireless ID function.

Stránka sa načítava ...

Godox AD300Pro Outdoor Flash Používateľská príručka

Godox AD300Pro Outdoor Flash Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty