Godox AD200Pro Používateľská príručka

AD200Pro

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch • Manuel d'utilisation

2

English

3 – 28

Čeština

29 – 54

Slovenčina

55 – 82

Magyar

83 – 109

Deutsch

110 – 136

3

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4

Foreword

Before using this product

Please read this user manual carefully in order to ensure your safety and the proper

operation of this product. Keep for future reference.

Thank you for purchasing a GODOX product.

WISTRO TTL Powerful & Portable Flash AD200 Pro include three kinds of flash tube and

adopts Godox 2.4G wireless X system. When using GODOX 2.4G wireless X system of

camera, AD200Pro can be triggered by X2/X1/XPro series flash trigger in TTL/M/Multi

mode, etc. AD200Pro can also use un combination with GODOX TTL camera flashes, TTL

outdoor flashes, TTL studios flashes, etc. With this AD200Pro flash, your shooting will

become simpler. You can easily achieve a correct flash exposure even in complex ligh-

changing environments.

WITSTRO flash system is portable photo lighting solution consist of camera flashes,

wireless trigger and a range of dedicated light shaping accessories. AD200Pro with

lightweight and portable body, strong power, large capacity battery and full speed

supply. If offers studio quality light for outdoor and live shooting.

The AD200 Pro offers:

• Compatible wireless TTL system: Fully support TTL/M/Multi functions of Canon,

Nikon, Sony, Fuji, Olympus, Panasonic, and Pentax cameras. Workable as Slave

unit in a wireless flash group.

• Lightweight and portable: up to 200Ws, is to 3 times powerful as camera

flashes (600EX), and the size almost the same

• Changeable flash head: Speedlite flash head: Portability, comes with multiple

sets of optical glass, even illumination and modeling lamp (LED). Bare bulb flash

head: Lighting out with 360-degree angles, all lighting accessories fit for bare

bulb flashes from most brands.

• Hight-quality AV panel: with clear and convenient operation.

• Built-in 2.4G wireless transmission: with all-in-one functions and 100 meters

further transmission.

• Studio quality light: up to 2500Ws, GN 60 (m ISO 100, with bare bulb flash head)

/ GN52 (Speedlite flash head)

• Battery pack: Large-capacity power supply (lithium, 14.4V/2900mAh), 0.01-1.8s

recycling and over 500 full power flashes.

• Wireless control: With built-in Godox 2.4G wireless X system to achieve TTL

control. Godox FT-16 flash trigger can also be used wirelessly adjust flash power

level and trigger the flash. AD200Pro has 3.5mm sync cord jack to achieve various

sync triggering mode.

5

• Power adjusts from full power to 1/256 in 81 levels.

• Change within ±100K over the entire power range in color temperature

mode.

• 1/8000s high-speed sync flash, high-speed sync triggering.

The powerful and portable AD200Pro meets the demands of freelance

commercial photographs, photojournalists wedding and beach portraiture

shooters, event and backpack photographers, photograph enthusiasts, etc.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.

• Do not disassemble. Should repairs become necessary, this product must be sent

to and authorized maintenance center.

• Keep out of reach of children.

• Stop using this product if it breaks open due to extrusion, falling or strong hit.

Otherwise, electric shock may occur if you touch the electronic parts inside it.

• Do not fire the flash directly into the eyes (especially those of babies) within short

distances. Otherwise, visual impairment may occur.

• Do not use the flash unit in the presence of flammable gases, chemicals and

other similar materials. In certain circumstance, these materials may be sensitive

to the strong light emitting from this flash unit and fire electromagnetic

interference may result.

• Do not leave or store the flash unit in the ambient temperature reads over 50°C.

Otherwise the electronic parts may be damaged.

• Turn off the flash unit immediately in the event of malfunction.

6

Name of Parts

Body

Control Panel

Flash Head

Mounting

Socket

Light Sensor

Power Switch

1/4“ Mounting

Hole

Head Release Button

Wireless Control Port

3.5 mm Sync Cord Jack

Battery Release Button

Battery Compartment

Lithium Battery

Control Panel

Type-C USB Port

<MODE> Mode

Selection Button

AV Panel

<MENU> Button

< > LED Modelling

Lamp

<GR/CH>

Group/Channel Button

<SET> Set Button

Select Dail

< > Wireless Selection

Button/High-Speed Sync Button

< > Test Button

7

Flash Head:

Speedlite flash head:

Bate bulb flash head:

Heat Dissipation

Holel

Head Mounting Socket

Modeling Lamp (LED)

Optical glass

Modeling Lamp (LED)

Heat Dissipation Hole

Accessory Locking Ring

Flash Tube

Tube Socket

Accessory Mount

Flash Head

Mounting Socket

8

AV Panel

• The display will only show settings currently applied.

• The functions displayed above function buttons 1 to 4, such as and ,

change according to settings status.

• When a button or dial is operated, the AV panel illuminated.

M Manual Flash

Channel

Wireless

Groupl

C.Fn

t0.1

Mask

Time

Beeper

Multi

Color Temperature Mode

: HHS

Battery Level

Flas exposure

compensation amount

sec

min

Flash frequency

Flash high temperature

Modeling Lamp (LED)

Standby

S1/S2

M: Manual Flash

Manual flash output

9

Multi Flash

Radio Transmission Shooting

S1/S2

Multi: Stroboscopic flash

Number of flashes

Flash frequency

Channel

M Mode

T0.1

S1

Radio transmission

wireles shooting

Group

C.Fn-F2

S1

10

Included Accessories

1. Speedlite flash head

2. Bare bulb flash head

3. AD-E2 holder*1

4. Battery charger

5. Lithium battery pack*1

6. Protecting bag*1

7. Instruction manual*1

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately,

so as to achieve best photography effects: Xpro & X1 Wireless Flash Trigger, H200R

Round Flash Head, FT-16 Remote Control, Barn door with 4 wings, Softbox, Beauty Dish,

Fold up umbrella, Snoots, Light stand, etc.

Attaching Bare bulb flash head

1. Remove the reflector or other accessories from the flash head.

2. Match the red dot on the base of the flash tube with the red dot in the Tube

Socket (4). Push the flash tube in unit it is securely seated into the socket.

11

Lithium Battery

Features

1. This flash unit uses Li-ion polymer battery which has long runtime. The Available

charge-and-discharge times are 500.

2. It is reliably safe. The inner circuit is against overcharge, over discharge,

overcurrent, and short circuit.

3. Take only 4 hours to fully charge the battery by using the standard battery

charger.

Cautions

• Do not short circuit

• Do not expose to rain or immerse into water. This battery is not waterproof.

• Keep out of reach of children.

• No over 24 hours continuous charging.

• Store in dry, cool ventilated places.

• Do not put aside or into fire.

• Dead batteries should be disposed according to local regulations.

• Long-time not to use, please charge it to 60% and then placed.

• If the battery has ceased using for over 3 moths, please make full recharge.

Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check the battery level

indication on the AV panel to see the remaining battery level.

Battery Level

Indication on the AV

panel

Meaning

3 grids

Full battery

2 grids

Medium battery

1 grid

Low battery

Blank grid

Lower battery, please recharge it

Blinking

The battery level is going to be used out immediately. And

the flash will auto power off in 1 minute.

Note: Please recharge the battery as soon s possible (within

10 days). Then, the battery can be used or be placed for

long period.

Modeling Lamp

With only the speedlite flash head have modeling lamp function, it will automatic turn

off after 30 minutes. Short press the modeling lamp button will control the modeling

lamp turn on or off.

12

Wireless Flash Mode

AD200Pro can only be set as slave unit (receiver end). Short press the wireless selection

button to switch the radio transmission function.

Wireless Mode

Flash Mode

OFF

M/Multi

Radio Transmission

TTL/M/Multi

Flash Mode – TTL Auto flash

This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode,

the camera and the flash will work together to calculate the correct exposure for the

subject and the background. In this mode, multiple TTL functions are available: FEC, FEB,

FEL, HSS, second curtain sync, modeling flash control with the camera’s menu screen.

Press <MODE> Mode selection Button and three flash modes will display on the AV

panel one by one with each pressing.

TTL Mode

Press <MODE> Mode Selection Button to enter TTL mode. The AV panel is displayed

<TTL>.

FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in

situations where minor adjusting of the TTL system is needed based on the

environment.

Setting FEC:

Press the <SET> Function

Button and flash exposure

compensation amount will

be highlighted on the AV

panel.

Set the flash exposure

compensation amount.

• Turn the Select Dial

set the amount.

• “0.3” means 1/3step

“0.7 means 2/3 step.

• To cancel the flash

exposure

compensation, set

the amount to “+0”.

Press <SET> button again

to confirm the setting.

13

High-Speed Sync

Hight Speed Sync (FP flash) enables the flash to synchronize with all camera shutter

speeds. This is convenient when you want to use aperture priority for fill-flash portraits.

Long Press Function Button < > for 2

seconds so that < > is displayed.

Please use the X1 series transmitter to

trigger.

• With high-speed sync, the faster the shutter speed, the shorter the effective flash

range.

• Multi flash mode cannot be set in hight-speed sync mode.

• Over-temperature protection may be activated after 20 consecutive high-speed

sync flashes.

Flash Mode – M: Manual Flash

The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop

increments. To obtain a correct flash exposure, use a hand-held flash meter to

determine the required flash output.

Press <MODE> button so

that <M> is displayed.

Turn the Select Dial to

choose a desired flash

output amount.

Press <SET> button again

to confirm the setting.

14

Optic S1 Secondary Unit Setting

In M manual flash mode, press the <MENU> button to enter C.FN-F2 to choose S1

function, so that this flash can function as an optic S1 secondary flash with optic sensor.

With this function, the flash will fire synchronously when the main flash fires, the same

effect as that by the use of radio triggers. This helps create multiple lighting effects.

Optic S2 Secondary Unit Setting

Press the <MENU> button to enter. C.FN-F2 to choose S2 function, so that this flash can

also function as an optic S2 secondary flash with optic sensor in M manual flash mode.

This is useful when cameras have pre-flash function. With this function, the flash will

ignore a single “pre-flash” from the main flash and will only fire in response to the

second, actual flash from the main unit.

S1 and S2 optic triggering is only available in M manual flash mode.

Display Flash Duration

Flash duration refers to the length of time that from flash’s firing to reach the half peek

at maximum. The half peak at maximum is usually expressed at t=0.5. In order to

provide the photographer with more concrete data, this product adopts t=0.1. The

difference between t=0.5 and t=0.1 is shown in the following picture.

Display Flash Duration Operation:

1. Press the <MENU> button to enter C.FN function.

2. Adjust the Select Dial to F6, the t0.1 icon will be displayed on the AV panel.

3. Press <SET> button to enter the adjustment condition.

4. Turn the Select Dial to choose the ON/OFF.

15

• The flash duration will only be displayed on the AV pane in M mode.

Stable Color Temperature Function

When use this function, the color temperature changes within ±100K over the entire

power range: enter MENU C.Fn-08 and set it as ON, which means the color temperature

function is turned on. When adjusting the power output from high to low in M mode,

Flash Ready Indicator will blink (the beeper will alarm for 1 minute). Now press the Test

Button to discharge, and the flash can be used as normal.

• This function can only be supported in M non-high-speed mode.

Flash Mode – Multi: Stroboscopic Flash

With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture

multiple images of a moving subject in a single photograph. You can set the firing

frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the

flash output.

Press <MODE> button so that <MULTI> is

displayed.

Turn the Select Dial to choose a desired

flash output.

16

Set the flash frequency and flash times.

• Press <SET> button to select the flash frequency. Turn the Select Dial to set the

number.

• Press <SET> button to select the flash times. Turn the Select Dial to set the

number.

• After finishing the setting, press <SET> button and all the settings will be

displayed.

Calculating the Shutter Speed

During stroboscopic flash, the shutter remains open until the firing stops. Use the

formula below to calculate the shutter speed and set it with the camera.

Number of Flashes / Flash Frequency = Shutter Speed

For example, if the number of flashes is 10 and the firing frequency is 5Hz, the shutter

speed should be at least 2 seconds.

To avoid overheating and deteriorating the flash head, do not use stroboscopic flash

more than 10 times in succession. After 10 times, allow the camera flash to rest for at

least 15 minutes. If you try to use the stroboscopic flash more than 10 times in

succession, the firing might stop automatically to protect the flash head. If this happens,

allow at least 15 minutes rest for the camera flash.

• Stroboscopic flash is most effective with a highly reflective subject against a dark

background.

• Using a tripod and remote control is recommended.

• A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.

• Stroboscopic flash can be used with “buLb”.

• If the number of flashes is displayed as “--” the firing will continue until the

shutter closes or the battery is exhausted. The number of flashes will be limited

as shown by the following table.

17

Maximum Stroboscopic Flashes:

Flash Output/Hz

Wireless Flash Shooting

AD200Pro adopts Godox 2.4G wireless X system, which has good compatibility with

other products of our company. As Slave unit, AD200Pro is automatically compatible

with Canon/Nikon/Sony TTL system according to the master unit. Nikon cameras (use

X1T-N), Canon cameras (use X1T-C) and Sony cameras (use X1T-S) can use one or more

AD200Pro-TTL flashes simultaneously.

Wireless Settings

Press the wireless selection button to switch wireless function ON/OFF. Turn the

wireless function on, the < > icon will be displayed on the AV panel. When using the FT-

16 remote control or other trigger, please turn off the wireless function.

Setting the Communication Channel

If there are other wireless flash systems nearby, you can change the channel IDs to

prevent signal interference. The channel IDs of the master unit and the Slave unit(s)

must be set to the same.

Long press the <GR/CH>

Button for 2 seconds, so

that the icon will be

displayed on the AV panel.

Turn the Select Dial to

choose a channel ID from

1 to 32.

Press the <SET> button to

confirm.

18

Setting the Communication Group

Short press the <GR/CH> button to choose group ID from A to E.

Wireless ID Settings

Press the MENU button to enter C.Fn-ID to choose OFF or any figure from 01-99.

Note: This can only be used when the master unit possesses the wireless ID function.

Positioning and Operation Range (Example of wireless flash shooting)

• Auto flash Shooting with One Slave Unit

• Use the supplied stand to position the slave unit.

• Before shooting, perform a test flash and test shooting.

• The transmission distance might be shorter depending on the conditions such as

positioning of slave units, the surrounding environment and whether conditions.

• With a lot of wireless signal interference conditions, if you miss flash, please

change the wireless communication channel.

MASTER

SLAVE

Transmission distance is about 100m

19

Wireless Multiple Flash Shooting

You can divide the slaves units into two or three groups and perform TTL auto flash

while changing the flash ratio (factor). In addition, you can set and shoot with a different

flash mode for each firing group, for up to 5 groups.

• Auto Shooting with Two Slave Groups

• Auto Shooting with Three Slave Groups.

When using the AD200Pro and Godox X1 series trigger together, the X1 can

control the flash function such as:

• Flash Mode: TTL, M, Multi

• Sync Mode: First-curtain sync, second curtain sync and High-speed sync

• Control the power level

• Modeling Lamp turn on or off

• Beeper turn on or off

20

C.Fn: Setting Custom Functions

The following table lists is available and unavailable custom function of this flash.

Custom

Function Signs

Functions

Setting Signs

Setting &

Description

Restrictions

F1

Beeper

ON

NO

OFF

F2

S1/S2 mode

selection

OFF

M mode

S1

S1 mode

S2

S2 mode

F3

Auto standby

OFF

NO

30min

Auto standby

without any

operation

60 min

90 min

F4

Delay flash

OFF, 0.01~30s

Can be

triggered as

second curtain

M/Multi Mode

F5

Mask

OFF

M mode

N1

ON: Trigger 2

times for 1

cycles, 1th

flash of trigger.

N2

ON: Trigger 2

times for 1

cycles, 2th

flash of trigger.

F6

t0.1 display

ON

Display

M mode

OFF

Not display

F7

ID Setting

OFF

Wireless mode

01-99

Choose any

figure from 01-

99

F8

Stable Color

Temperature

Mode

OFF

M non-high-

speed mode

ON

Stránka sa načítava...

Godox AD200Pro Používateľská príručka

Godox AD200Pro Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty