Tesla TSL-SWI-DIMMER Užívateľská príručka

QUICK START GUIDE

TESLA SMART

DIMMER/TOUCH

EN

SK

SL

HR

DE

PL

UA

RU

CZ

HU

TSL-SWI-DIMMER/ TSL-SWI-DIMMERT

Product Outline

Panel

Touch Dimming

Status LED

Rotate Dimming

On/Off

Switch

On/Off

Switch

2

Specification

Indicator Light Status

Light Color Light Status Switch Status

white LED bar with brightness

level : Light turn on

Brightness indicator blink

slowly (Breathing) Light turn off

Bottom LED blink fast Network disconnected

Bottom LED blink Quick configure mode

Bottom LED blink slowly AP configure mode

Input Power: 100~240V AC 50/60Hz

Dimming Control: Trailing Edge Cut

Inductive load (LED/CFL): <220W

Resistive load (Incandescent): <300W

Communication: WiFi 802.11 b/g/n 2.4GHz

Control Channel: 1 CH

Standby Power: ≤0.5W

Working Temperature: -10°C ~ 45°C

Working Humidity: <90%

Button life: 500k times

Dimension: 86x86x53.5mm [TSL-SWI-DIMMER]

86x86x43mm [TSL-SWI-DIMMERT]

3

Tools You‘ll Need

Contents Supplied

Dimmer Screws

Flat-head Screwdriver

Screwdriver

Pliers

Voltage tester Approximately 30

minutes of your time

to install and setup the

Dimmer.

4

Installation

Turn Off The Breaker

Turn off the circuit break and use the electrical

tester to test the power.

WARNING: RISK OF ELECTRIC SHOCK

This product installation requires handling 100-240 volt wiring.

Follow each step carefully. If any concerns handling wiring, hire

a qualified electrician. Ensure all work meets applicable local and

national codes.

1

5

2Connection Diagram

6

3

4

Pull Out the Knob

(Only for TSL-SWI-DIMMER)

Remove Nuts and Gaskets

(Only for TSL-SWI-DIMMER)

Pull the knob upwards.

Remove the dimmer nuts

and gaskets.

7

5

6

Remove the Panel

Mount the Switch

Remove the touch panel

cover of the dimmer.

Use the screws provided.

8

7

8

Attach the Wallplate

Turn on the Power

Attach the adapter to the dimmer using

the screws provided and snap on the

wallplate.

Turn the power back on at the

circuit breaker.

9

APP Operation

1 Preparation for use

• Tesla Smart is available for both iOS and Android OS. Search the name

‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to

download the App and register or login your account.

• Make sure that the smartphone is connected to the 2.4Ghz network.

3 Control Dimmer

• Control dimmer with APP

• Add scene mode and timing mode in the APP

2 Connect the device

• Open Tesla Smart app and click “+” sign

to Add new device

• Select Switches - Tesla Smart Dimmer

• Please follow the instructions to add the

Tesla Smart Dimmer step by step

10

Reset

Press and hold Switch button for 5s to reset

the Dimmer and get into Quick Configure

Mode.

Troubleshooting

1. The light is Flashing or rot dimming? The Smart Dimmer switch support Dimmab-

le light source only, non-Dimmerable light source may cause the light flashing or

not working

2. Dimmer has not power on? The smart dimmer products need to be powered by

the neutral line. If there is no neutral line in the inch-Manor location, the smart

dimmer can not work

3. Can not connect to APP? Make sure the mobile phone and devices (gateways)

in a same Wi-Fl network, and the device power an get into pair mode, make sure

the device has good signal to support communication.

4. How far can be controlled? Please make sure that the distance between the

product and the Wi-Fi router or gateway does no- exceed 25 meters, If the

partition wall is used but the material and thickness of the wall will have a greater

impact communication, based on the actual situation, users can consider

adjusting the location of the Wi-Fi router or gateway or increasing Wi-Fi routers

or gateways to ensure normal product communication.

5. Can the Dimmer still work if the network is disconnected? In the event of a

network disconnection, the status indicator will flash. At this time, all APP control,

smart linkage and other network functions will be invalid but the local control will

not be affected.

11

1Tesla Smart Skills (Alexa)

• Log in your Alexa account on a smart phone or a computer, then

tap Home>Skills & Games

• Search “Tesla Smart” and select the right one according the blue

logo (same with App)

• Login the account you registered on the App in Part 2, then click

“Link Now”

• The Account is linked successfully, and then tap Authorize to

Complete.

Congratulations! Alexa Devices (Echo) can Control the Switch

ON/OFF.

To add or delete switches, please delete or add them in the Tesla

Smart App (See Part 2) and then the Alexa will synchronize auto-

matically. If you cannot see the name of switches in the Devices

List in Alexa Page. You can click “Discover” in Alexa page it will

synchronize from the Tesla Smart App.

12

2Tesla Smart Skills (Google)

• Find “Home Control” in the main menu on the Google Home app´s

home page > Home Control > tap “+”.

• Find “Tesla Smart” in the list

• Input your Tesla Smart account and password you registered in Part

0, then tap “Link Now”.

• After you assign rooms for the Switch, your Switch will be listed in

the Home Control page.

Control your smart dimmer through Google Home. Now you

can control your smart dimmer through Google Home.

If you set the name as “bedroom light”, the supported voice

commands are as below:

Ok Google, turn on bedroom light.

Ok Google, set bedroom light to 50%.

13

Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n

Frequency band: 2.400 - 2.4835 MHz

Max. radio-frequency power (EIRP): < 20 dBm

EU DECLARATION OF CONFORMITY

Hereby, Witty, s.r.o declares that the radio equipment type EDM-1W-

BA-EU, EDM-1WBB-EU is in compliance with EU directives. The full text

of the EU declaration of conformity is available at the following internet

address: teslasmart.com/declaration

Manufacturer

Tesla Global Limited

Gee Chang Industrial Building,

121 Des Voeux Road Central

852 00 Hong Kong

www.teslasmart.com

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for separate collection. The pro-

duct must be disposed of in accordance with the regulations for disposal

of electrical and electronic equipment (Directive 2012/19/EU on waste

electrical and electronic equipment). Disposal together with regular muni-

cipal waste is prohibited. Dispose of all electrical and electronic products

in accordance with all local and European regulations at the designated

collection points which hold the appropriate authorisation and certification

in line with the local and legislative regulations. Correct disposal and

recycling help to minimise impacts on the environment and human health.

Further information regarding disposal can be obtained from the vendor,

authorised service centre or local authorities.

14

BENUTZERHANDBUCH

TESLA SMART

DIMMER/TOUCH

EN

SK

SL

HR

DE

PL

UA

RU

CZ

HU

TSL-SWI-DIMMER/ TSL-SWI-DIMMERT

Produktbeschreibung

Panel

Touch Dimming

Status LED

Rotate Dimming

On/Off

Switch

On/Off

Switch

16

Spezifikation

Zustand der Kontrollleuchte

Lichtfarbe Lichtzustand Schalterzustand

Weiß LED-Leiste mit dem

Helligkeitsniveau Anzünden

Helligkeitskontrollleuchte

blinkt langsam (pulsiert) Erlöschen

Untere LED blinkt schnell Netz abgetrennt

Untere LED blinkt Modus der schnellen

Konfiguration

Untere LED blinkt langsam Konfigurationsmodus AP

Aufgenommene Leistung: 100~240V AC 50/60Hz

Betätigung der Dämmerung: Abstiegsflanke

Induktionsbelastung (LED/CFL): <220W

Widerstandsbelastung: <300W

Kommunikation: WiFi 802.11 b/g/n 2.4GHz

Kontrollkanal: 1 CH

Aufgenommene Leistung im

Bereitschaftsmodus: ≤0.5W

Betriebstemperatur: -10°C ~ 45°C

Betriebsfeuchtigkeit: <90%

Lebensdauer der Taste: 500k Drücken

Abmessungen: 86x86x53.5mm [TSL-SWI-DIMMER]

86x86x43mm [TSL-SWI-DIMMERT]

17

Notwendige Werkzeuge

Contents Supplied

Dimmer Schrauben

Ca. 30 Minuten Ihrer

Zeit zur Installation

und zur Einstellung des

Dimmers.

Schraubenzieher

Flacher Schraubenzieher

Spannungsprüfer

Zange

18

Installation

Schalten Sie den Schutzschalter aus

Schalten Sie den Schutzschalter aus und testen

Sie die Leistung mittels des Spannungsprüfers.

WARNUNG: STROMSCHLAGGEFAHR

Die Installation dieses Produktes erfordert die Manipulierung

mit der Kabelleitung mit der Spannung von 100-240 Volt. Halten

Sie die beschriebenen Schritte konsequent ein. Im Zweifelsfall

wenden Sie sich an einen qualifizierten Elektroinstallateur. Si-

chern Sie, dass alle Arbeiten im Einklang mit den entsprechenden

örtlichen und nationalen Vorschriften durchgeführt werden.

1

19

20

2Schaltschema

Stránka sa načítava...

Tesla TSL-SWI-DIMMER Užívateľská príručka

Tesla TSL-SWI-DIMMER Užívateľská príručka

Súvisiace články

Ostatné dokumenty