Tesla TSL-SWI-WIFI1 Užívateľská príručka

QUICK START GUIDE

TESLA SMART SWITCH/DUAL

(With Neutral Required)

EN

SK

SL

DE

PL

CZ

HU

TSL-SWI-WIFI1/ TSL-SWI-WIFI2

- Voice/APP Control

- Smart Home Automation with Multi devices

- Silent switch with LED Indication

Product Indtoruction

Smart switch products are suitable for electrical equipment such as light-

ning, fans, curtains, etc., through the network, voice and APP remote control

functions, with various sensors to easily achieve home automation.

Specification

Input Power: 200~240V AC 50/60Hz

Resistive load: INC 3•300W, LED 5•300W

Communication: WiFi 2.4G

Standby Power: ≤0.5W

Working Temperature: -10°C ~ 45°C

Working Humidity: <90%

Life Cycle: 50k times

Dimension: 86x86x37.5mm

2

Product outline

Indicator Light Status

Indicator LED

On/Off button

Light Color Green Light Status Switch Status:

White OFF The switch turn off

ON The switch turn on

Flicker The switch is in quick

configure mode

Green ON The switch turn off

OFF The switch turn on

3

Contents Supplied

Tools You‘ll Need

Switch

Screws

Flat-head Screwdriver

Screwdriver

Pliers

Voltage tester Approximately

30 minutes of your time

to install and setup

the Switch

4

Installation

Turn Off The Breaker

Turn off the circuit break and use the electrical

tester to test the power.

WARNING: RISK OF ELECTRIC SHOCK

This product installation requires handling 100-240 volt wiring.

Follow each step carefully. If any concerns handling wiring, hire

a qualified electrician. Ensure all work meets applicable local and

national codes.

1

5

L2 LN

N

N L

L

Connection Diagram

1 GANG

2 GANG

2

6

3 GANG

N

L

L2L3 LN

N

NL N L

L

Remove The Panel

3

Remove the switch panel

cover of the switch.

7

1

2

Mount The Switch

Attach The Wallplate

4

5

Use the screws provided.

Attach the adapter to the switch

using the screws provided and snap

on the wallplate.

8

Turn On The power

APP Operation

6

Turn the power back on at the circuit breaker

1 Preparation for use

•Tesla Smart is available for both iOS and Android OS. Search the name

‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to

download the App and register or login your account.

• Make sure that the smartphone is connected to the 2.4Ghz network.

9

2 Connect the device

• Open Tesla Smart app and click “+” sign to Add new device

• Select Switches - Tesla Smart Switch

• Please follow the instructions to add the Tesla Smart Switch step by step

3 Control Switch

• Control switch with APP

10

Reset

Press and hold switch button for 5s until

LED flash to reset the switch and get

into quick configure mode.

Remark:

1. Smart phone and device must connect

to same Wi-Fi during setup mode

2. The device must be added to the

account before it can be controlled remotely

3. After the device is successfully accessed,

other users can obtain control of the product

through the sharing function.

Troubleshooting

1. Switch has not power on? The smart switch products need to be powered by the

neutral line. If there is no neutral line in the inch-Manor location, the smart switch

can not work

2. Can not connect to APP? Make sure the mobile phone and devices (gateways) in

a same Wi-Fl network, and the device power an get into pair mode, make sure the

device has good signal to support communication.

3. How far can be controlled? Please make sure that the distance between the

product and the Wi-Fi router or gateway does no- exceed 25 meters, If the

partition wall is used but the material and thickness of the wall will have a greater

impact communication, based on the actual situation, users can consider adjusting

the location of the Wi-Fi router or gateway or increasing Wi-Fi routers or gateways

to ensure normal product communication.

4. Can the Switch still work if the network is disconnected? In the event of a

network disconnection, the status indicator will flash. At this time, all APP control,

smart linkage and other network functions will be invalid but the local control will

not be affected.

11

Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n

Frequency band: 2.412 - 2.4835 MHz

Max. radio-frequency power (EIRP): < 20 dBm

EU DECLARATION OF CONFORMITY

Hereby, Tesla Global Limited declares that the radio equipment type

ESW-1WAA-EU, ESW-2WAA-EU is in compliance with EU directives. The

full text of the EU declaration of conformity is available at the following

internet address: tsl.sh/doc

Manufacturer

Tesla Global Limited

Far East Consortium Building,

121 Des Voeux Road Central

Hong Kong

www.teslasmart.com

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for separate collection. The pro-

duct must be disposed of in accordance with the regulations for disposal

of electrical and electronic equipment (Directive 2012/19/EU on waste

electrical and electronic equipment). Disposal together with regular muni-

cipal waste is prohibited. Dispose of all electrical and electronic products

in accordance with all local and European regulations at the designated

collection points which hold the appropriate authorisation and certification

in line with the local and legislative regulations. Correct disposal and

recycling help to minimise impacts on the environment and human health.

Further information regarding disposal can be obtained from the vendor,

authorised service centre or local authorities.

12

BEGLEITER DURCH

DEN SCHNELLSTART

EN

SK

SL

DE

PL

CZ

HU

TSL-SWI-WIFI1/ TSL-SWI-WIFI2

TESLA SMART SWITCH/DUAL

(Nullleiter erforderlich)

- Stimmenbetätigung / Betätigung mittels einer App

- Automatisierung des intelligenten Haushalts durch einige Geräte

- Schalter mit der LED-Anzeige

Vorstellung des Produkts

Smarte Schalter sind für Elektrogeräte geeignet, wie Leuchten, Lüfter,

Vorhänge usw. sind, die an das Netz angeschlossen sind, die man mittels

der Stimmenbefehle und der App betätigen kann. Sie verfügen über ver-

schiedene Sensoren, mithilfe deren der Benutzer die Automatisierung des

Haushalts einfach erreicht.

Spezifikation

Aufgenommene Leistung: 200~240V AC 50/60Hz

Widerstandsbelastung: INC 3•300W, LED 5•300W

Kommunikation (erreichbar

für das ausgewählte Modell) : WiFi 2.4G

Aufgenommene Leistung im

Bereitschaftsmodus: ≤0.5W

Betriebstemperatur: -10°C ~ 45°C

Betriebsfeuchtigkeit: <90%

Lebensdauer: 50 000 Schaltzyklen

Abmessungen: 86x86x37.5mm

14

Produktbeschreibung

Zustand der Kontrollleuchte

LED-Kontrollleuchte

Einschalten/Ausschalten-Taste

Lichtfarbe Schalterzustand Lichtzustand

Weiß OFF Ausgeschalteter Schalter

ON Eingeschalteter Schalter

Es blinkt Schalter befindet sich im Mo-

dus der schnellen Konfiguration

Grün ON Ausgeschalteter Schalter

OFF Eingeschalteter Schalter

15

Packungsinhalt

Notwendige Werkzeuge

Schalter

Schraubenzieher

Flacher Schraubenzieher

Spannungsprüfer

Zange

Schrauben

Ca. 30 Minuten Ihrer

Zeit zur Installation

und zur Einstellung des

Schalters.

16

Installation

Schalten Sie den Schutzschalter aus

Schalten Sie den Schutzschalter aus und testen

Sie die Leistung mittels des Spannungsprüfers.

1

WARNUNG: STROMSCHLAGGEFAHR

Die Installation dieses Produktes erfordert die Manipulierung

mit der Kabelleitung mit der Spannung von 100-240 Volt.

Halten Sie die beschriebenen Schritte konsequent ein. Im

Zweifelsfall wenden Sie sich an einen qualifizierten Elektro-

installateur. Sichern Sie, dass alle Arbeiten im Einklang mit

den entsprechenden örtlichen und nationalen Vorschriften

durchgeführt werden.

17

L2 LN

N

N L

L

Schaltschema

1 GANG

2 GANG

2

18

3 GANG

N

L

L2L3 LN

N

NL N L

L

Nehmen Sie das Paneel herab

3

Nehmen Sie die Abdeckung des

Schalterpaneels herab.

19

Installieren Sie den Schalter

Befestigen Sie die Wandplatte

4

5

Verwenden Sie mitgelieferte

Schrauben.

Schließen Sie den Adapter an

den Schalter mit Hilfe der

mitgelieferten Schrauben an

und schnappen Sie es an die

Wandplatte auf.

1

2

20

Stránka sa načítava...

Tesla TSL-SWI-WIFI1 Užívateľská príručka

Tesla TSL-SWI-WIFI1 Užívateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty