TSL-SWI-DIMMER

Tesla TSL-SWI-DIMMER Užívateľská príručka

  • Prečítal som si návod na použitie pre inteligentné stmievače Tesla Smart TSL-SWI-DIMMER a TSL-SWI-DIMMERT. Viem vám pomôcť s otázkami o inštalácii, nastavení, používaní aplikácie Tesla Smart a riešení problémov. Návod popisuje ich funkcie, ako je diaľkové ovládanie, nastavovanie jasu, kompatibilita s rôznymi typmi žiaroviek a integráciu s hlasovými asistentmi Alexa a Google Assistant.
  • Čo robiť, ak svetlo bliká?
    Prečo sa stmievač nezapne?
    Ako ďaleko môžem ovládať stmievač?
    Čo sa stane pri odpojení od siete?
QUICK START GUIDE
TESLA SMART
DIMMER/TOUCH
EN
SK
SL
HR
DE
PL
UA
RU
CZ
HU
TSL-SWI-DIMMER/ TSL-SWI-DIMMERT
Product Outline
Panel
Panel
Touch Dimming
Status LED
Status LED
Rotate Dimming
On/Off
Switch
On/Off
Switch
2
Specification
Indicator Light Status
Light Color Light Status Switch Status
white LED bar with brightness
level : Light turn on
Brightness indicator blink
slowly (Breathing) Light turn off
Bottom LED blink fast Network disconnected
Bottom LED blink Quick configure mode
Bottom LED blink slowly AP configure mode
Input Power: 100~240V AC 50/60Hz
Dimming Control: Trailing Edge Cut
Inductive load (LED/CFL): <220W
Resistive load (Incandescent): <300W
Communication: WiFi 802.11 b/g/n 2.4GHz
Control Channel: 1 CH
Standby Power: ≤0.5W
Working Temperature: -10°C ~ 45°C
Working Humidity: <90%
Button life: 500k times
Dimension: 86x86x53.5mm [TSL-SWI-DIMMER]
86x86x43mm [TSL-SWI-DIMMERT]
3
Tools You‘ll Need
Contents Supplied
Dimmer Screws
Flat-head Screwdriver
Screwdriver
Pliers
Voltage tester Approximately 30
minutes of your time
to install and setup the
Dimmer.
4
Installation
Turn Off The Breaker
Turn off the circuit break and use the electrical
tester to test the power.
WARNING: RISK OF ELECTRIC SHOCK
This product installation requires handling 100-240 volt wiring.
Follow each step carefully. If any concerns handling wiring, hire
a qualified electrician. Ensure all work meets applicable local and
national codes.
1
5
2Connection Diagram
6
3
4
Pull Out the Knob
(Only for TSL-SWI-DIMMER)
Remove Nuts and Gaskets
(Only for TSL-SWI-DIMMER)
Pull the knob upwards.
Remove the dimmer nuts
and gaskets.
7
5
6
Remove the Panel
Mount the Switch
Remove the touch panel
cover of the dimmer.
Use the screws provided.
8
7
8
Attach the Wallplate
Turn on the Power
Attach the adapter to the dimmer using
the screws provided and snap on the
wallplate.
Turn the power back on at the
circuit breaker.
9
APP Operation
1 Preparation for use
• Tesla Smart is available for both iOS and Android OS. Search the name
‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to
download the App and register or login your account.
• Make sure that the smartphone is connected to the 2.4Ghz network.
3 Control Dimmer
• Control dimmer with APP
• Add scene mode and timing mode in the APP
2 Connect the device
Open Tesla Smart app and click “+” sign
to Add new device
• Select Switches - Tesla Smart Dimmer
Please follow the instructions to add the
Tesla Smart Dimmer step by step
10
Reset
Press and hold Switch button for 5s to reset
the Dimmer and get into Quick Configure
Mode.
Troubleshooting
1. The light is Flashing or rot dimming? The Smart Dimmer switch support Dimmab-
le light source only, non-Dimmerable light source may cause the light flashing or
not working
2. Dimmer has not power on? The smart dimmer products need to be powered by
the neutral line. If there is no neutral line in the inch-Manor location, the smart
dimmer can not work
3. Can not connect to APP? Make sure the mobile phone and devices (gateways)
in a same Wi-Fl network, and the device power an get into pair mode, make sure
the device has good signal to support communication.
4. How far can be controlled? Please make sure that the distance between the
product and the Wi-Fi router or gateway does no- exceed 25 meters, If the
partition wall is used but the material and thickness of the wall will have a greater
impact communication, based on the actual situation, users can consider
adjusting the location of the Wi-Fi router or gateway or increasing Wi-Fi routers
or gateways to ensure normal product communication.
5. Can the Dimmer still work if the network is disconnected? In the event of a
network disconnection, the status indicator will flash. At this time, all APP control,
smart linkage and other network functions will be invalid but the local control will
not be affected.
11
1Tesla Smart Skills (Alexa)
Log in your Alexa account on a smart phone or a computer, then
tap Home>Skills & Games
Search “Tesla Smart” and select the right one according the blue
logo (same with App)
Login the account you registered on the App in Part 2, then click
“Link Now”
The Account is linked successfully, and then tap Authorize to
Complete.
Congratulations! Alexa Devices (Echo) can Control the Switch
ON/OFF.
To add or delete switches, please delete or add them in the Tesla
Smart App (See Part 2) and then the Alexa will synchronize auto-
matically. If you cannot see the name of switches in the Devices
List in Alexa Page. You can click “Discover” in Alexa page it will
synchronize from the Tesla Smart App.
12
2Tesla Smart Skills (Google)
Find “Home Control” in the main menu on the Google Home app´s
home page > Home Control > tap “+”.
Find “Tesla Smart” in the list
Input your Tesla Smart account and password you registered in Part
0, then tap “Link Now”.
After you assign rooms for the Switch, your Switch will be listed in
the Home Control page.
Control your smart dimmer through Google Home. Now you
can control your smart dimmer through Google Home.
If you set the name as “bedroom light”, the supported voice
commands are as below:
Ok Google, turn on bedroom light.
Ok Google, set bedroom light to 50%.
13
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.400 - 2.4835 MHz
Max. radio-frequency power (EIRP): < 20 dBm
EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type EDM-1W-
BA-EU, EDM-1WBB-EU is in compliance with EU directives. The full text
of the EU declaration of conformity is available at the following internet
address: teslasmart.com/declaration
Manufacturer
Tesla Global Limited
Gee Chang Industrial Building,
121 Des Voeux Road Central
852 00 Hong Kong
www.teslasmart.com
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The pro-
duct must be disposed of in accordance with the regulations for disposal
of electrical and electronic equipment (Directive 2012/19/EU on waste
electrical and electronic equipment). Disposal together with regular muni-
cipal waste is prohibited. Dispose of all electrical and electronic products
in accordance with all local and European regulations at the designated
collection points which hold the appropriate authorisation and certification
in line with the local and legislative regulations. Correct disposal and
recycling help to minimise impacts on the environment and human health.
Further information regarding disposal can be obtained from the vendor,
authorised service centre or local authorities.
14
BENUTZERHANDBUCH
TESLA SMART
DIMMER/TOUCH
EN
SK
SL
HR
DE
PL
UA
RU
CZ
HU
TSL-SWI-DIMMER/ TSL-SWI-DIMMERT
Produktbeschreibung
Panel
Panel
Touch Dimming
Status LED
Status LED
Rotate Dimming
On/Off
Switch
On/Off
Switch
16
Spezifikation
Zustand der Kontrollleuchte
Lichtfarbe Lichtzustand Schalterzustand
Weiß LED-Leiste mit dem
Helligkeitsniveau Anzünden
Helligkeitskontrollleuchte
blinkt langsam (pulsiert) Erlöschen
Untere LED blinkt schnell Netz abgetrennt
Untere LED blinkt Modus der schnellen
Konfiguration
Untere LED blinkt langsam Konfigurationsmodus AP
Aufgenommene Leistung: 100~240V AC 50/60Hz
Betätigung der Dämmerung: Abstiegsflanke
Induktionsbelastung (LED/CFL): <220W
Widerstandsbelastung: <300W
Kommunikation: WiFi 802.11 b/g/n 2.4GHz
Kontrollkanal: 1 CH
Aufgenommene Leistung im
Bereitschaftsmodus: ≤0.5W
Betriebstemperatur: -10°C ~ 45°C
Betriebsfeuchtigkeit: <90%
Lebensdauer der Taste: 500k Drücken
Abmessungen: 86x86x53.5mm [TSL-SWI-DIMMER]
86x86x43mm [TSL-SWI-DIMMERT]
17
Notwendige Werkzeuge
Contents Supplied
Dimmer Schrauben
Ca. 30 Minuten Ihrer
Zeit zur Installation
und zur Einstellung des
Dimmers.
Schraubenzieher
Flacher Schraubenzieher
Spannungsprüfer
Zange
18
Installation
Schalten Sie den Schutzschalter aus
Schalten Sie den Schutzschalter aus und testen
Sie die Leistung mittels des Spannungsprüfers.
WARNUNG: STROMSCHLAGGEFAHR
Die Installation dieses Produktes erfordert die Manipulierung
mit der Kabelleitung mit der Spannung von 100-240 Volt. Halten
Sie die beschriebenen Schritte konsequent ein. Im Zweifelsfall
wenden Sie sich an einen qualifizierten Elektroinstallateur. Si-
chern Sie, dass alle Arbeiten im Einklang mit den entsprechenden
örtlichen und nationalen Vorschriften durchgeführt werden.
1
19
20
2Schaltschema
/