Silvercrest SDBS 2400 A1 Operating Instructions Manual

IAN 277706

STEAM GENERATOR SDBS 2400 A1

STEAM GENERATOR

Operating instructions

DAMPFBÜGELSTATION

Bedienungsanleitung

PARNA LIKALNA POSTAJA

Navodila za uporabo

NAPAŘOVACÍ ŽEHLIČKA

S PARNÍ STANICÍ

Návod k obsluze

GB Operating instructions Page 1

SI Navodila za uporabo Stran 23

CZ Návod k obsluze Strana 43

DE / AT / CH Bedienungsanleitung Seite 65

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

A

B

C

SDBS 2400 A1

GB │ 1 ■

Contents

Introduction ..............................................2

Information about these operating instructions ..............................2

Copyright ..........................................................2

Proper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warnings ..........................................................2

Safety ...................................................3

Basic safety instructions ...............................................3

Technical details ...........................................7

Operating elements ........................................8

Setting up and connecting ...................................9

Safety information ...................................................9

Package contents and transport inspection ................................9

Unpacking .........................................................9

Disposal of the packaging ............................................10

Set-up location requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Electrical connection .................................................10

Handling and use .........................................11

Before ﬁrst use .....................................................11

Cleaning and maintenance .................................15

Safety information ..................................................15

Replacing the limescale ﬁlter ..........................................15

Cleaning the appliance ..............................................16

Troubleshooting ..........................................17

Storage/disposal .........................................18

Storage ...........................................................18

Disposal of the appliance .............................................18

Kompernaß Handels GmbH warranty ........................19

Service ...........................................................20

Importer ..........................................................20

Ordering replacement parts ................................21

SDBS 2400 A1

■ 2 │ GB

Introduction

Information about these operating instructions

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating instructions are part

of this product. They contain important information about safety, usage and

disposal. Before using the product, please familiarise yourself with all operating

and safety instructions. Use the product only as described and for the range of

applications speciﬁed. Please also pass these operating instructions on to any

future owner.

Copyright

This documentation is protected by copyright.

Any copying or reproduction, including in the form of extracts, or any reproduction

of images (even in a modiﬁed state), is permitted only with the written authorisation

of the manufacturer.

Proper use

This appliance is only intended for the dry ironing or steam ironing of all types of

clothing, curtains and fabrics (including hanging). The appliance is not intended

for any other purpose, nor for use beyond the scope described. The appliance is

not intended for use in commercial or industrial environments.

The manufacturer accepts no responsibility for damage caused by failure to

observe these instructions, improper use or repairs, unauthorised modiﬁcations

or the use of unapproved replacement parts. The operator bears sole liability.

Warnings

The following types of warning are used in these operating instructions:

DANGER

A warning notice at this hazard level indicates an imminently

hazardous situation.

If the hazardous situation is not avoided, it could result in death or serious

physical injury.

► Follow the instructions in this warning notice to avoid the risk of death or

serious injury.

SDBS 2400 A1

GB │ 3 ■

WARNING

A warning at this hazard level indicates a potentially hazardous

situation.

Failure to avoid this hazardous situation could result in injury.

► Follow the instructions in this warning notice to prevent injury.

CAUTION

A warning notice at this hazard level indicates a risk of material

damage.

Failure to avoid this situation could result in material damage.

► Follow the instructions in this warning notice to prevent material damage.

NOTE

► A note provides additional information, which will assist you in using the

appliance.

Safety

This section contains important safety instructions for using

the appliance.

This appliance complies with statutory safety regulations.

Improper use may result in personal injury and property

damage.

Basic safety instructions

To ensure safe operation of the appliance, follow the

safety guidelines set out below:

■ The appliance may not be used if it has fallen down, if it

shows visible damage or is leaking.

■ To prevent accidents, have defective plugs and/or power

cables replaced immediately by an authorised specialist

technician or our Customer Service department.

SDBS 2400 A1

■ 4 │ GB

■

This appliance may be used by children aged 8 years or

more and by persons with reduced physical, sensory or

mental capabilities or lack of experience and/or knowledge

if they are supervised, or have been instructed in the safe

use of the appliance and have understood the potential

risks. Do not allow children to play with the appliance.

Cleaning and user maintenance may not be carried out by

children unless they are supervised.

■ Do not allow children to play with the appliance.

■ All repairs must be carried out by authorised specialist

companies or by the Customer Service department. Improper

repairs may put the user at risk. It will also invalidate any

warranty claims.

■ Repairs to the appliance during the warranty period may

only be carried out by a customer service department

authorised by the manufacturer. Otherwise, no warranty

claims will be held for any subsequent damages.

■ Defective components must always be replaced with original

replacement parts. Compliance with safety requirements can

only be guaranteed if original replacement parts are used.

■ Do not place any objects on the appliance, especially not

on the connecting hose between the base station and the iron.

■ Do not operate or place the appliance close to an open

ﬂame (e.g. candles).

SDBS 2400 A1

GB │ 5 ■

RISK OF ELECTRICAL SHOCK!

► The appliance should only be connected to correctly installed

and earthed mains power sockets. Ensure that the rating for

your local power supply corresponds with the details on the

rating plate of the appliance.

► Arrange for customer service to repair or replace connecting

cables and/or appliances that are not functioning properly

or have been damaged.

► Stop using the appliance if the anti-kink protection on the

power cable is damaged!

► The steam iron and its connecting hose must be kept out

of reach of children younger than eight years old while

switched on or cooling down.

► Never immerse the appliance in water. Wipe it only with a

slightly damp cloth.

► Do not expose the appliance to rain, and never use it in a

humid or wet environment.

► Always hold the plug when handling the power cable and

never pull on the cable itself.

► Never touch the power cable or the plug with wet hands.

► Do not place the appliance itself or furniture etc. on the

power cable and ensure that it is not jammed.

► Ensure that the power cable never becomes wet or moist during

operation.

► Do not open the appliance housing or attempt to repair or

modify the appliance. If the housing is opened or improper

modiﬁcations are made, you run the risk of receiving a

potentially fatal electric shock and the warranty will be void.

SDBS 2400 A1

■ 6 │ GB

RISK OF ELECTRICAL SHOCK!

► Protect the appliance from drips or splashes of water. Do not

place any vessels containing liquid (e.g. ﬂower vases) on or

near the appliance.

► Always pull the plug out of the power socket after completing

ironing and before cleaning the appliance.

► You must always pull the plug out of the power socket before

ﬁlling the water tank with water.

WARNING! RISK OF INJURY!

► Always place the iron on the base station placement area.

Pull the plug out of the power socket if you take a break

during ironing.

RISK OF SCALDING OR BURNING!

Caution, hot surfaces!

► The iron remains very hot while switched on and also a few

minutes after being switched oﬀ. Never touch the iron sole of

the iron!

► When the steam iron is hot, hold it only by the handle.

► Children should be supervised to ensure that they do not

play with the appliance.

► Never aim the hot steam at persons or animals.

► Never iron or steam clothing or other fabrics which are

being held by other people or are being worn.

SDBS 2400 A1

GB │ 7 ■

CAUTION PROPERTY DAMAGE

A warning notice at this hazard level indicates a

risk of material damage.

Failure to avoid this situation could result in material damage.

► Never leave the steam iron unattended while it is connected

to the mains power supply.

► Never use water containing carbon dioxide in the appliance.

► Do not operate the appliance without water, otherwise the

pump could burn out.

► Ensure that neither the power cable or the connection hose

come into contact with the hot sole of the iron.

► Do not scratch the sole of the iron. Avoid contact between

the sole of the iron and metal parts such as buttons or zips.

► Operate the steam iron and the base station only on a stable,

ﬂat and level surface.

Technical details

Ironing station

Voltage supply 220–240V

~

/50/60Hz

Power consumption 2000 – 2400 W

Max. water tank ﬁlling capacity 2 l

Steam production

(max.) approx. 90g/min. +/− 10%

Heating time (steam ironing)

approx. 2 minutes

Boiler pressure 3 bar

SDBS 2400 A1

■ 8 │ GB

Operating elements

(See fold-out page for illustrations)

Figure A:

 Steam button

 Temperature control

 Heat-up indicator lamp

 Connecting hose

 Placement area

 Sole of the iron

Figure B:

 Shaft cover

 Limescale ﬁlter

 Water tank ﬁller cap

 Water tank

Figure C:

- “eco” steam indicator lamp

3 “max” steam indicator lamp

! “anti calc” indicator lamp

. RESET button

0 On/Oﬀ Button

6 Steam strength button

SDBS 2400 A1

GB │ 9 ■

Setting up and connecting

Safety information

WARNING

While using the appliance, there is a risk of injury

and/or damage to property!

To avoid risks, observe the following safety instructions:

► Do not allow children to play with packaging materials.

There is risk of suﬀocation.

► Please follow the instructions regarding the electrical connec-

tion of the appliance to avoid damage to property.

Package contents and transport inspection

The appliance is supplied with the following components as a standard:

● Steam Generator

● Velcro tape for fastening the mains cable

● Operating instructions

NOTE

► Check the package for completeness and signs of visible damage.

► If the delivery is incomplete or damage has occurred as a result of defec-

tive packaging or during transport, contact the Service hotline (see section

Service).

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the box.

♦ Removal packaging material and protective ﬁlm.

SDBS 2400 A1

■ 10 │ GB

Disposal of the packaging

The packaging protects the appliance from damage during transport. The pack-

aging materials have been selected for their environmental friendliness and ease

of disposal, and are therefore recyclable.

Returning the packaging to the material cycle conserves raw materials and

reduces the amount of waste that is generated. Dispose of packaging materials

that are no longer needed in accordance with applicable local regulations.

NOTE

► If possible, keep the original appliance packaging for the entire duration of

the warranty period so that the appliance can be packaged properly for

return shipment in the event of a warranty claim.

Set-up location requirements

The work service on which you place the base station must be stable, ﬂat and

heat-resistant.

Electrical connection

♦ Insert the power cable plug into a properly connected and earthed mains

power socket which supplies the voltage stated in the “Technical data”

section.

SDBS 2400 A1

GB │ 11 ■

Handling and use

This section provides you with important information on handling and using the

appliance.

Before ﬁrst use

♦ Clean the sole of the iron  using a slightly moist cloth.

♦ To remove any leftover production residues, iron an old, clean cloth a few

times.

Filling the water tank

NOTE

Use only tap water or distilled water.

If the mains water in your location is rated as hard, it is recommended that you

mix the mains water with some distilled water. Otherwise limescale deposits

can adversely aﬀect the appliance functions.

Mix the tap water with distilled water in accordance with the following table:

Water hardness

Ratio of distilled water to

tap water

very soft/soft -

medium 1:1

hard 2:1

very hard 3:1

Do not add water with any additives (such as starch, perfume, softeners or

other chemicals) to the water tank . The appliance could be damaged,

since residues can form in the steam chamber. These residues can soil the

goods being ironed if they are deposited through the steam openings.

1) Remove the power plug from the mains power socket if the appliance is

plugged in.

2) Open the water tank ﬁller cap .

This is marked with the symbol:

.

3) Fill the water tank . Do not ﬁll above the MAX marking in the water tank .

4) Close the water tank ﬁller cap .

SDBS 2400 A1

■ 12 │ GB

NOTE

► Do not tip or swivel the steam station when the water tank is full. If you

do, water may be discharged from the ﬁller opening.

5) Insert the plug into a mains power socket.

Ironing without steam

NOTE

Always set the temperature control  to the lowest level (min) before switching

the appliance on. The symbols on the temperature control  correspond to

the following settings:

Symbol Material

Temperature

(approx.)

min -

Synthetics 70 - 120 °C

Silk 70 - 120 °C

Wool 100 - 160 °C

( - max)

Cotton/linen 140 - 210 °C

1) Press the On/Oﬀ button 0 to turn the appliance on. The indicator lamp

integrated in the On/Oﬀ button 0 lights up and the “max” steam indicator

lamp 3 ﬂashes.

2) Rotate the temperature control  to set the required ironing temperature.

3) The heat-up indicator lamp  lights up during heating. As soon as the heat-

up indicator lamp  goes out, the set temperature has been reached and

you can start ironing.

4) Put the iron down on the base station placement area  after ironing. Set

the temperature control  to “min”.

5) Press the On/Oﬀ button 0 to turn the appliance oﬀ. The indicator lamp

integrated in the On/Oﬀ button 0 and the “max” steam indicator lamp 3

go out.

6) Pull out the plug from the mains socket.

SDBS 2400 A1

GB │ 13 ■

Steam ironing

1) Press the On/Oﬀ button 0 to turn the appliance on. The indicator lamp

integrated in the On/Oﬀ button 0 lights up and the “max” steam indicator

lamp 3 ﬂashes.

2) Turn the temperature control  to set the required ironing temperature. The

temperature control  must be set to a minimum of

to produce steam.

3) The heat-up indicator lamp  lights up during heating. As soon as the heat-

up indicator lamp  goes out, the set temperature has been reached.

4) Press the steam strength 6 button to set the required steam strength:

– If the “max” steam indicator lamp 3 is lit up, a lot of steam will be

produced.

– If the “eco” indicator lamp - is lit up, less steam will be produced.

As soon as the “eco” - or “max” 3 indicator lamps light up continuously

(depending on the setting) you can start steam ironing.

5) While you are ironing, you can now press and hold the steam button  to

continuously spray steam onto the goods to be ironed from the sole of the

iron . Release the steam button  to stop producing steam.

NOTE

When you press the steam button , it can take a few seconds until steam is

issued from the sole of the iron .

6) Put the iron down on the base station placement area  after ironing.

Set the temperature control  to “min”.

7) Press the On/Oﬀ button 0 to turn the appliance oﬀ. The indicator lamp

integrated in the On/Oﬀ button 0 and the “eco” - or “max” 3 steam

indicator lamps (depending on setting) will go out.

8) Disconnect the plug from the mains socket.

SDBS 2400 A1

■ 14 │ GB

Vertical steam ironing

1) Hang the fabric to be ironed on a clothes hanger which is hung against

a heat-resistant surface.

2) Rotate the temperature control  to set the required ironing temperature.

The temperature control  must be set to a minimum of

to produce

steam.

3) Wait until the heat-up indicator lamp  goes out.

4) Press the steam strength button 6

to set the required steam strength:

– If the “max” steam indicator lamp 3 is lit up, a lot of steam will be

produced.

– If the “eco” indicator lamp - is lit up, less steam will be produced.

As soon as the “eco” - or “max” 3 indicator lamps light up continuously

(depending on the setting) you can start steam ironing.

5) Hold the steam iron in a vertical position and press the steam button .

6) Touch the fabric lightly with the sole of the iron and steam it to remove

creases.

7) Release the steam button  to stop producing steam.

Reﬁlling with water

You can reﬁll the appliance with water while it is switched on.

1) Put the iron down on the base station placement area .

2) Reﬁll the water tank as described in the section “Filling the water tank”.

SDBS 2400 A1

GB │ 15 ■

Cleaning and maintenance

Safety information

WARNING!

RISK OF FATAL ELECTRIC SHOCK!

Risk of bodily injury when cleaning the appliance!

To avoid risks, observe the following safety instructions:

► Before cleaning the appliance, always pull the plug out of the mains power

socket.

► Allow the appliance to cool down completely if necessary.

► Never immerse the appliance in water to clean it.

CAUTION

Damage to the appliance!

► To avoid irreparable damage to the appliance, ensure that no moisture

penetrates it during cleaning.

► Do not use abrasive or chemical cleaners, wire brushes or other abrasive

objects to clean the appliance's surfaces.

Replacing the limescale ﬁlter

NOTES

Note the following information when handling the limescale ﬁlter :

Not suitable for consumption/drinking!

Keep the limescale ﬁlter  out of the reach of children.

Store the spare limescale ﬁlter in a cool, dry location.

The appliance will notify you when the limescale ﬁlter  needs replacing:

As soon as the “anti calc” indicator lamp

! lights up, the limescale ﬁlter 

must be replaced.

The service life of the limescale ﬁlter  can vary considerably depending on the

water hardness.

SDBS 2400 A1

■ 16 │ GB

NOTE

If the appliance is used regularly, it is advisable to always have a replacement

limescale ﬁlter available. This means that you can replace the limescale ﬁlter 

immediately as soon as the "anti calc" indicator lamp

!lights up.

You can order new limescale ﬁlters  from our service department (see

section Ordering replacement parts).

1) Switch the appliance oﬀ using the On/Oﬀ button 0 and allow it to cool

down.

2) Remove the power plug from the mains power socket.

3) Remove the iron from the base station and put it to one side.

4) Open the shaft cover .

5) Pull the limescale ﬁlter  upwards out of the limescale ﬁlter shaft.

6) Place the new limescale ﬁlter  in the limescale ﬁlter shaft and press it down

until it is ﬁrmly seated.

7) Close the shaft cover .

8) Insert the plug into a mains power socket and switch on the appliance using

the On/Oﬀ switch 0.

9) Press the “RESET” button . for about 3 seconds. The “anti calc” indicator

lamp

!goes out.

You have now completed replacement of the limescale ﬁlter .

Cleaning the appliance

♦ Clean the iron surfaces and the base station using only a soft, slightly moist

cloth.

♦ Clean the sole of the iron with a soft moist cloth. Ensure that the sole of

the iron  is not scratched.

♦ Pour the residual water in the water tank  into a basin. To do this, put the

iron down to one side and open the water tank ﬁller cap .

♦ The appliance must be completely dry before further use.

SDBS 2400 A1

GB │ 17 ■

Troubleshooting

WARNING

Repairs to electrical appliances should only be carried out by specialists

trained by the manufacturer. Improper repairs can cause considerable risks

to users and damage to the appliance.

Fault Possible cause Remedy

The appliance is

not working.

Voltage supply error. Ensure that the plug is ﬁrmly

inserted into the power socket.

The appliance is not switched on. Switch the appliance on using

the On/Oﬀ button 0.

The appliance

does not produce

any/produces too

little steam.

There is not enough water in the

water tank .

Fill the water tank with water .

The appliance has not heated up

suﬃciently.

Wait until the temperature indica-

tor lamp goes out.

The temperature control  has

been set in the

–

range.

Turn the control until a temperature

in the

range has been set.

The steam unit has not been used

for a long time or is being used

for the ﬁrst time.

Press and hold down the steam

button. The steam takes a little

time until it discharges from the

sole of the iron .

Water drips out

of the sole of the

iron .

If steam ironing is paused brieﬂy,

the cooling steam condenses

in the connecting hose . This

leads to drip formation.

This is normal. Hold the iron over

a collecting cloth or container

and press the steam button .

Steam will discharge from the

sole of the iron  instead of

water after a few seconds. You

can now continue ironing.

The temperature you have set is

too low for steam ironing.

Set a temperature suitable for

steam ironing (setting range

).

Wet areas occur

on the goods be-

ing ironed.

Such areas can be caused by

steam condensing on the ironing

board.

First, wipe any wet areas oﬀ

the ironing board and then iron

the wet areas on the fabric dry

without steam.

NOTE

► If you are unable to resolve the problem by taking any of the aforemen-

tioned steps, please contact the service department.

Stránka sa načítava...

Silvercrest SDBS 2400 A1 Operating Instructions Manual

Silvercrest SDBS 2400 A1 Operating Instructions Manual

v iných jazykoch

Súvisiace články

Ostatné dokumenty