Silvercrest SKD 1000 A3 User Manual And Service Information

V 1.11

English .................................................................................................. 2

Polski .................................................................................................. 29

Magyar .............................................................................................. 56

Slovenščina ......................................................................................... 83

Čeština .............................................................................................. 110

Deutsch ............................................................................................. 137

SilverCrest SKD 1000 A3

2 English

Table of Contents

Table of Contents ............................................................................................. 2

Trademarks ..................................................................................................... 4

Introduction ..................................................................................................... 4

Intended Use ................................................................................................... 4

Package Contents ............................................................................................ 5

Technical Specifications .................................................................................... 6

Safety Instructions ........................................................................................... 7

Getting Started .............................................................................................. 10

Connectors and Controls ............................................................................................................... 10

Left Panel ..................................................................................................................................... 10

Right Panel .................................................................................................................................. 10

Top ............................................................................................................................................... 10

Front ............................................................................................................................................. 11

Interior view of the cassette compartment ................................................................................ 11

Installing the Conversion Software ................................................................................................ 12

System Requirements .................................................................................................................. 12

Installing AudioLava ................................................................................................................... 12

Preparing the Cassette Digitizer .................................................................................................... 12

Inserting the Batteries ................................................................................................................. 13

Playing Cassettes ........................................................................................... 14

Connecting the earphones ............................................................................................................. 14

Playing audio cassettes .................................................................................................................. 14

SilverCrest SKD 1000 A3

English 3

Inserting an audio cassette ........................................................................................................ 14

Playing the cassette .................................................................................................................... 15

Removing the audio cassette ..................................................................................................... 15

Copying Audio Cassettes to a PC .................................................................... 16

Connecting the device to your PC ................................................................................................. 16

Copying the cassette content to the PC ........................................................................................ 17

Editing the digitized content ........................................................................................................... 21

Maintenance / Cleaning ................................................................................. 24

Environmental Considerations and Recycling ................................................. 25

Conformity Notice .......................................................................................... 25

Troubleshooting ............................................................................................. 26

The cassette digitizer can’t be switched on .............................................................................. 26

No sound .................................................................................................................................... 26

Problems when copying cassette content to a computer ........................................................ 26

Information about warranty and service processing ..................................... 27

SilverCrest SKD 1000 A3

4 English

Trademarks

Windows

®

is a registered trademark of Microsoft Corporation.

USB is a registered trademark.

Pentium is a registered trademark of Intel Corporation.

Other names and products can be the trademarks or registered trademarks of their respective

owners.

Introduction

Thank you for choosing a SilverCrest product. With this cassette digitizer you can not only play

your audio cassettes when moving or travelling; you can also convert them to a modern, digital

multimedia format and even store the digital audio data on a CD or a USB memory stick.

Intended Use

This is a consumer electronics device. It is designed for playing and digitizing audio cassettes. It

may only be used for private use, not industrial or commercial purposes. Furthermore, the device

may not be used in tropical climates.

This device fulfils all conformity-relevant norms and standards. Any modifications to the device

may result in these directives no longer being met. Only use the accessories recommended by

the manufacturer.

Please observe the regulations and laws in the country of use.

SilverCrest SKD 1000 A3

English 5

Package Contents

Remove the device and all the accessories from the packaging. Remove the packaging material

and check whether all the parts are complete and undamaged. In the case that you find anything

missing or damaged, please contact the manufacturer.

SilverCrest Cassette Digitizer

SKD 1000 A3

SilverCrest

earphones PS-09

USB cable, length 70 cm





2 AA-sized brand-name

batteries, 1.5 V

CD with the AudioLava

conversion software (Lineart

illustration)

User manual with service

information (Lineart illustration)

SilverCrest SKD 1000 A3

6 English

Technical Specifications

Model name SilverCrest SKD 1000 A3

Power supply 2 AA batteries, 1.5 V

(optionally via a mains adapter, 3 V ,

polarity )

or via a USB 2.0 cable connection

(recommended) to the computer (+5 V)

Maximum current consumption 500 mA

Dimensions 11.3 x 8.4 x 3.2 cm

Weight 170 g (without batteries)

Operating temperature 5 °C to 35 °C

Operating humidity 85 % rel. humidity

Earphones PS-09

Impedance 32 Ohms

Broadband characteristics voltage approx. 100 mV

Max. sound pressure level with supplied

earphones

approx. 94 dB(A)

Max. output voltage on earphones jack approx. 80 mV

The technical data and design may be changed without notification.

SilverCrest SKD 1000 A3

English 7

Safety Instructions

Before you use this device for the first time, please read the following notes in this manual and

heed all warnings, even if you are familiar with handling electronic devices. Keep this manual

safe for future reference. If you sell the device or pass it on, it is essential that you also hand over

this manual. The manual is an integral part of the device.

CAUTION!

This icon and the word “Caution” alert you to a potentially

dangerous situation. Ignoring them could lead to severe injury or even death.

WARNING!

This symbol and the word “Warning” denote important

information required for the safe operation of the product and for the safety of its

users.

This icon denotes further information on the topic.

Risks associated with excessive volume levels

WARNING!

Using headphones to listen to high-volume audio can damage

your auditory system.

CAUTION!

Only use the earphones supplied with your device (SilverCrest PS-

09). Other types of earphones can produce harmful sound pressure levels.

In accordance with safety regulations the maximum permitted noise level is 100 dB(A). The

device fully complies with these legal requirements.

Do not use the earphones at high volume levels, otherwise you will damage your hearing and

possibly disturb other people. Although the device is designed to enable you to perceive external

noise, only adjust the volume to maximum level so that you still capable of hearing what is

happening around you. Environment noise can sound unfamiliar. Under dangerous

circumstances (for example when driving a vehicle or when working with machines) the sound

SilverCrest SKD 1000 A3

8 English

may distract your attention or prevent you from being aware of what is happening around you.

You should not use the device in these situations.

Operating Environment

The device is not designed for use in environments with high temperatures or humidity (e.g.

bathrooms), and must be kept free of dust. Operating temperature and operating humidity: 5°C

to 35°C, max. 85 % RH.

CAUTION! Always make sure that:

 there is free circulation of air (do not place the device on shelves, on a carpet, on a bed, or

anywhere that obstructs the ventilation, and ensure at least 10 cm clearance on all sides)

 no direct heat sources (e.g. radiators) can affect the device

 no direct sunlight or bright artificial light reaches the device

 contact with sprayed and dripping water and abrasive liquids must be avoided and the

device should never be operated near water. It must especially never be immersed (do not

place any items containing liquids such as beverages, vases, etc. onto or next to the device)

 the device is never placed in the immediate vicinity of magnetic fields (e.g. loudspeakers)

 no foreign bodies enter the device



the device is not subject to major great temperature fluctuations as this can cause condensation and

short-circuits. If the device is exposed to strong temperature fluctuations, wait (approx. 2 hours) until

it has reached ambient temperature before turning it on

 the device is not subjected to excessive shocks and vibrations

 Candles and any other open flames must be kept away from this

product at any times in order to avoid the risk of fire

SilverCrest SKD 1000 A3

English 9

CAUTION!Batteries

Insert the batteries with the correct polarity. Refer to the polarity markings beside the battery

compartment. Do not try to recharge the batteries and do not throw batteries into the fire. Do not

mix battery types (old and new or carbon and alkaline, etc.). Remove the batteries when the

device is not to be used for a long time. In the event of improper use, there is a risk of explosion

and leakage.

Batteries must never be opened or deformed, as this could result in chemicals leaking out which

could cause injuries. Batteries and small parts represent potential choking hazards. Keep the

batteries in a safe place. If a battery is swallowed, seek medical help immediately. If the battery

fluid becomes in contact with the skin or eyes, rinse immediately with plenty of water and seek

medical aid.

CAUTION! Children and persons with disabilities

Electrical devices are not suitable for children. Also persons with reduced physical, sensorial or

mental capabilities should only use electrical devices in appropriate circumstances. Do not allow

children or persons with disabilities to use electrical devices when not under supervision, unless

they are instructed accordingly and supervised by a competent person responsible for their

safety. Children should always be supervised to ensure that they do not play with the product.

Keep the packaging away from children and persons with disabilities too.

Danger of suffocation!

SilverCrest SKD 1000 A3

10 English

Getting Started

Connectors and Controls

This User Manual has a fold-out cover. Please fold out the title page and read the following

descriptions. This will enable you to always have the diagram visible, permitting a better

understanding of the location of the different buttons and sockets.

Left Panel

1 Socket for an optional mains adapter

Right Panel

2 Volume control: Turn the volume control knob to increase or lower the volume.

3 USB port: The USB port is used to connect the USB cable to allow connection of the

device to a PC and copying of audio cassettes. We recommend that you use a USB 2.0

port on your PC.

4 Earphone socket: For connecting the supplied earphones.

5 Release button for the cassette compartment cover. To open the cassette compartment,

slide this button in the direction of the arrow.

Top

6

DIR button: Press this button during playback or when playback has been stopped to

switch between playback of side A and side B of the cassette.

7  /  button: Sliding this button to the  position ensures that the playback toggles

to the other side when the end of the current side of the cassette is reached. After the

second side has been played, playback will stop. Sliding this button to the  position

ensures that the playback toggles to the other side when the end of the current side of

the cassette is reached and the cassette sides continue to alternate, playing in loop.

Note: In the  position, playback will not stop once the end of the cassette has been

reached. The device will play side A, side B, side A etc. in loop.

SilverCrest SKD 1000 A3

English 11

8 FF button*: This is the Fast Forward button for advancing the cassette tape. To stop the

Fast Forward function, press the STOP button (11).

The STOP button (11) is also used to stop the Fast Forward function when the end of the

tape is reached.

9 REW button*: Press this button to rewind the cassette tape. To stop the Rewind function,

press the STOP button (11).

The STOP button (11) is also used to stop the Rewind function when the start of the tape

is reached.

10 PLAY button: Press this button to start playback of the cassette.

11 STOP button: Press this button to stop playback and to stop the Fast Forward or the

Rewind function.

Front

12 Cassette compartment cover

Interior view of the cassette compartment

13 Battery compartment

* Please note that the cassette will wind into the opposite direction if the cassette side has been

toggled by pressing the DIR button or if it has toggled automatically.

SilverCrest SKD 1000 A3

12 English

Installing the Conversion Software

System Requirements

With the supplied AudioLava conversion software you can digitize your analog recordings and

at the same time filter out hissing, sound imperfections, crackling and other background noise,

and add Hall effects etc. Before installing the software, make sure that your computer fulfils the

following minimum requirements:

 Pentium or compatible processor, 800 MHz or higher

 Minimum of 256 MB RAM

 Graphics board with a colour depth of at least 16 bits

 A Windows-compatible sound board

 Operating system: Windows 7/8, Windows Vista or Windows XP

 DirectX 8.0 or higher.

Installing AudioLava

The software is provided on the supplied CD.

1. Insert the supplied CD into the CD or DVD drive of your computer. The software should

install and launch automatically; if it doesn’t, double-click on the “CD_Start.exe” file in the

main folder on the CD.

2. Then follow the on-screen instructions to install the software. If you are then asked whether

the computer should be restarted, click on Yes.

Preparing the Cassette Digitizer

You can operate the device using the supplied AA-sized (Mignon) batteries, via the USB cable

connected to a PC, or by using an optional mains adapter (not supplied). The mains adapter

must have a compatible DC output plug and must supply an operating voltage of 3V. Mains

adapter output polarity:

SilverCrest SKD 1000 A3

English 13

Inserting the Batteries

The battery compartment (13) is located underneath the cassette compartment cover (12).

1. Slide the black release button (5) in the direction indicated by the arrow to release the

cassette compartment cover, and then raise the cover.

2. Insert your fingernail into the recess above the cover of the battery compartment (13) and

open the cover. Remove the cover and put it to one side.

3. Insert the supplied AA batteries into the

unit with the correct polarity (+ and -).

Push the first battery as far as you can

to the left so that it is no longer visible,

and then insert the second battery (see

the diagram to the left of the battery

compartment).

4. Replace the cover on the battery compartment. First position its lower edge on the two lugs

at the bottom left and right of the battery compartment, and then carefully press down the

top edge of the cover with your finger until it clicks into place.

If the volume level drops, or if the device stops operating or the playback

becomes distorted, replace the batteries with new batteries of the same type. The

device does not provide an indication that the batteries are weak.

SilverCrest SKD 1000 A3

14 English

Playing Cassettes

You can use your SilverCrest SKD 1000 A3 just like a normal, portable cassette player for

listening to audio cassettes. Thanks to its compact and lightweight construction and the

independent power supply via batteries, it’s a mobile device that can be used when travelling,

jogging etc. To be able to directly listen to audio cassettes, you first need to connect the

earphones.

Connecting the earphones

When using the earphones, please heed the warnings in the Safety Instructions on page 7.

To listen to music, you can connect the supplied SilverCrest PS-09 earphones.

WARNING!

Using headphones to listen to high-volume audio can damage

your auditory system.

1. Insert the earphones jack into the earphones socket (4).

CAUTION!

Only use the earphones supplied with your device (SilverCrest PS-

09). Other types of earphones can produce harmful sound pressure levels.

Playing audio cassettes

Inserting an audio cassette

1. Open the cassette compartment cover by sliding the release button (5) in the direction of the

arrow.

2. Insert an audio cassette into the cassette compartment. Insert the side at which the tape is

visible first. Make sure that the two pins at the top of the cassette compartment slot into the

corresponding holes of the cassette.

SilverCrest SKD 1000 A3

English 15

Before inserting the cassette, you should make sure that the tape is slightly

tensioned. This is to avoid the tape becoming chewed. Hold the cassette in front

of you with one hand, and using a finger of your other hand, or a pencil, rotate

the right-hand knurled wheel clockwise.

3. Close the cassette compartment by simply pressing down the cover until it clicks into place.

Playing the cassette

 You can play, stop, fast forward or rewind the cassette using the PLAY (10), STOP (11), FF

(8) and REW (9) buttons. See the description of the buttons on page 10.

 During the playback, you can adjust the volume by turning the volume knob (2) clockwise or

anticlockwise.

Removing the audio cassette

1. If the tape is still playing or if the Fast Forward or Rewind functions are operating, press the

STOP button (11) to stop it.

2. Open the cassette compartment cover by sliding the release button (5) in the direction of the

arrow.

3. Remove the audio cassette from the cassette compartment. First lift the side of the cassette at

which the tape is visible. Insert a fingernail into the upper edge of the cassette and lift it

slightly, so that you can then grip it at both sides and completely remove it from the cassette

compartment.

4. Close the cassette compartment by simply pressing down the cover until it clicks into place.

SilverCrest SKD 1000 A3

16 English

Copying Audio Cassettes to a PC

To be able to digitize and store your cassettes on a PC, you must first have installed the supplied

AudioLava software on your computer (see page 12, Installing AudioLava).

Connecting the device to your PC

1. Connect your SilverCrest SKD 1000 A3 to a switched-on PC using the supplied USB cable.

Connect the end of the cable with the small USB connector to the USB port (3) on the

device, and the end with the large USB connector to a USB 2.0 port on your PC.

2. Your SilverCrest SKD 1000 A3 should then be detected automatically by the operating

system and the necessary drivers should be installed automatically (this step is only

performed the first time you connect the SilverCrest SKD 1000 A3 to your PC).

When the cable has been connected and the PC is switched on, power will be

supplied to your SilverCrest SKD 1000 A3 by the computer via the USB cable.

You can leave the batteries in place or the optional mains adapter connected.

SilverCrest SKD 1000 A3

English 17

Copying the cassette content to the PC

This section provides basic information on digitizing an audio cassette on your PC. The

AudioLava software used to perform the digitizing offers a wide range of functions which are not

all described in this user manual. A detailed description of the functions of AudioLava is available

in the AudioLava online Help files.

1. Start the AudioLava program by clicking on the icon on the Desktop. The AudioLava

Cleaning Wizard is then displayed.

2. In the Cleaning Wizard, click on "Record from tape deck" to start recording.

SilverCrest SKD 1000 A3

18 English

The recording window is then displayed.

3. Insert the cassette that you wish to digitize and then press the PLAY button (10) to start

playing the tape. Adjust the volume using the Volume Control knob (2) on the device as

described in the "Input Level" option (see Step 4 below).

Use the FF button (8) or the REW button (9) to spool to the start of the tape or to

find the track that you wish to digitize.

Make sure that the correct recording console is configured in the AudioLava

software. Select "Options" > "Device Settings". Under “Recording Console” you

can select an entry. This entry can be, for example: "[MME] Microfon (USB

Microphone)" or "[MME] Microphone (USB Microphone)". Please note that this

entry may vary depending on the operating system.

Stránka sa načítava ...

Silvercrest SKD 1000 A3 User Manual And Service Information

Silvercrest SKD 1000 A3 User Manual And Service Information

V iných jazykoch

Súvisiace články

Ďalšie dokumenty