Philco PHD 6415R Používateľská príručka

GLASS CERAMIC

INDUCTION COOKTOP

USER'S MANUAL

PHD 6415R

Dear customer,

Thank you for buying aPHILCO brand product. So that your appliance serves you well, please read all

the instructions in this user'smanual.

EN - 1

04/2014

CONTENTS

PART 1: IMPORTANT SAFETY INSTRUCTIONS ................................................................................................ 2

PART 2: DESCRIPTION OF THE CONTROL PANEL ........................................................................................... 5

PART 3: OPERATING THE APPLIANCE ............................................................................................................. 6

• Before  rst use .................................................................................................................................................................................6

• Touch controls .................................................................................................................................................................................6

• Turning the appliance on and o .............................................................................................................................................6

• Turning the hotplates on and o ..............................................................................................................................................6

• Detection of cookware .................................................................................................................................................................7

• Residual heat indicator .................................................................................................................................................................7

• Booster function..............................................................................................................................................................................7

• Timer function .................................................................................................................................................................................7

• Automatic cooking .........................................................................................................................................................................8

• Pause function .................................................................................................................................................................................8

• Memory ..............................................................................................................................................................................................8

• Keep warm function ......................................................................................................................................................................8

• Control panel lock ..........................................................................................................................................................................9

• Principle of induction ....................................................................................................................................................................9

• Suitable cookware ..........................................................................................................................................................................9

• Energy savings .............................................................................................................................................................................. 10

PART 4: CLEANING AND MAINTENANCE ...................................................................................................... 12

PART 5: INSTALLING THE APPLIANCE ........................................................................................................... 13

• Safety precautions ....................................................................................................................................................................... 13

• Selecting the installation location ......................................................................................................................................... 13

• Positioning the cooktop on the workbench ...................................................................................................................... 14

• Electrical connection .................................................................................................................................................................. 15

PART 6: TROUBLESHOOTING ........................................................................................................................ 16

PART 7: TECHNICAL SPECIFICATIONS ........................................................................................................... 18

EN - 2

04/2014

PART 1: IMPORTANT SAFETY INSTRUCTIONS

Recommendation:

Carefully read these instructions before installing and operating this appliance. Write down the serial number

found on the rating label of the oven in the space below. It is essential that you store this user'smanual in asafe

place so that you can use it in the future. If you intend to sell the appliance, give it to another owner, or if you

move, always make sure that the user'smanual is attached to the appliance, so that the new owner can learn

about the operation of the appliance and the relevant warnings.

SERIAL NUMBER:

Basic safety instructions

• Take the appliance out of the packaging. Check that you have removed all advertising and promotional

labels before  rst use.

• After unpacking, check the appliance for damage, also check the power cord for damage, if appropriate.

Do not install adamaged appliance or an appliance with adamaged power cord. Contact an authorised

service centre.

• We recommend that you keep the packaging materials at least for the warranty period.

• This appliance is designed for household use in the home.

• Only use the appliance for the purpose of heating or cooking food; do not use for other purposes than for

which it is designed (e.g. heating aroom).

• The Manufacturer, importer take no responsibility for damages caused by inappropriate, incorrect

or negligent use.

• Do not use the appliance for cutting or chopping food (e.g. bread). The glass surface of the appliance must

not be used as awork surface.

• Do not use cookware that could scratch or damage the surface of the appliance.

• Only connect the appliance to aproperly grounded circuit that conforms to valid electrical safety codes.

If you are not sure whether the used electrical circuit is properly grounded, please contact aquali ed

electrician.

• Do not subject the power cord to excessive pressure during the installation and placement of the device,

or to extreme temperatures.

• Under no circumstances should you replace the power cord yourself. All maintenance must be performed

by aquali ed electrician with the power cord disconnected.

• Do not use adapters, multi-socket adapters or extension cords.

• Built-in appliances may only be used when installed into asuitable unit that conforms to relevant standards.

• If you hear acracking sound coming from the appliance, turn it o and disconnect it from the power

socket to prevent potential injury by electrical shock.

• We recommend that you install asmoke detector and that you locate  re blankets or  re extinguishers

near the appliance.

• The appliance may heat up during operation, prevent small children from coming close to the appliance.

• This appliance must not be used by any persons (including children) with mental disabilities, weak strength

or by inexperienced persons, unless they have been properly trained or schooled in the safe use of the

product, or unless they are properly supervised by aquali ed person who is responsible for their safety.

• Children should always be supervised so as not to play with the appliance.

EN - 3

04/2014

Safety instructions for use

• Do not place any metal items or  ammable materials such as knives, forks, spoons, wiping cloths or pot

lids, etc. near the cooking surfaces as they may heat up or catch on  re.

• Do not place empty cookware on cooking surfaces when they are turned on or use the surfaces without

cookware.

• Only use cookware designed for this type of appliance.

• Do not leave the appliance turned on without supervision, especially when cooking with fat or oil. In the

event of burns, asudden ignition could occur.

• Pay increased attention when another turned on appliance (e.g. an iron) is used near the turned on

appliance and check that the power cord is not touching or near the cooking surfaces.

• Do not place cookware with awet base on to hot hotplates. There is adanger of damaging the cookware

and the surface treatment of the cooktop.

• If liquid is spilled from the cookware and comes into contact with ahot hotplate, pressurised steam may

be created. Risk of skin burns or damage to the cooktop. Carefully wipe the liquid o the cooktop using

adry wiping cloth.

• Check that the appliance is properly turned o if you will not be using it.

• Only use cookware that is suitable and designed for this type of appliance. Such cookware for induction

appliances should be clearly marked by the manufacturer.

• Do not use  ammable substances (alcohol, petrol) near the appliance when using it.

• You may hear aquiet sound when the appliance is turned on. This is normal.

• If the appliance is not used according to the here provided instructions, there is arisk of skin burns.

IMPORTANT

Leave aventilation opening of at least 5 mm between the workbench and the front part of the component

located underneath it.

Cleaning and repairs

• Ensure that the appliance is turned o and that it has cooled down completely before cleaning it.

• Do not use steam cleaners for cleaning.

• Do not use coarse or aggressive cleaning agents as they could damage the surface of the appliance.

• For cleaning use only special agents designed for glass ceramic cooktops.

• Keep the appliance clean to extend its lifetime.

• If the appliance needs servicing or repairs that requires the removal of the cover, please contact an

authorised service centre or another quali ed person.

• Under no circumstances should you attempt to repair the appliance yourself.

• Neither the manufacturer, importer nor the distributor take any responsibility for damage resulting from

incorrect installation or connection.

EN - 4

04/2014

Avoid the following

The base of the used cookware

Acourse base can scratch the cooktop. Do not turn on the cooktop with empty cookware. This could cause

damage.

Hot cookware

Never move hot pots or pans on to the control panel or the frame of the cooktop.

Salt, sugar and sand

Salt, sugar and sand can scratch the cooktop. Do not use the cooktop as aworkbench or as storage space.

Hard and pointed items

Hard or pointed items can damage the cooktop.

Boiled over food

Sugar and similar foods may damage the cooktop.

Plastic and foils

Aluminium foils and plastic containers will melt on hot hotplates.

Cleaning agents

Cleaning agents that are not designed for glass ceramic cooktops may leave irremovable stains on the surface

of the cooktop

EN - 5

04/2014

PART 2: DESCRIPTION OF THE CONTROL PANEL

Description of the control panel

Power selection and

timer setting zone

Timer indicator light

Timer display

Hotplate button

Power on display

Timer

button

Pause

indicator

light

On / o

button

NOTE:

Due to continuous development the presented picture may di er from the actual model.

Shown on the display

Display Meaning Function

0 Zero Hotplate is activated.

1…9 Power level Selecting apower level

U Pan detection No pan or inadequate pan.

A Thermal accelerator Automatic cooking

E Error message Electronic error

H Residual heat The hotplate is still hot even after it is turned o .

P Booster function The Booster function is activated.

U Keep warm function Automatically maintains temperature at 42 °C

II Stop & Go function The operation of the cooktop is paused.

EN - 6

04/2014

PART 3: OPERATING THE APPLIANCE

Before  rst use

Before  rst use, wipe the cooktop with aclean wiping cloth and wipe dry using adry wiping cloth. Do not

use any cleaning agents, there is arisk of a ne blueish coat forming on the cooktop, which is very di cult to

remove.

Touch controls

The hotplate is equipped with electronic controls with touch buttons. The respective function is activated

when abutton is touched. This is accompanied by an indicator light, aletter or number on the display and

asound is made.

Turning the appliance on and o

To turn on the appliance, press the button 0/Ionce. "0" will appear on the display.

To turn o the appliance, press the button 0/Ionce. The display will turn o and "H" will appear.

If you do not press any button for 20 seconds, the hotplates will return to the stand-by mode.

Turning ahotplate on and o

To set the power level using your  ngers, slide across the power selection zone to the right to increase power

or to the left to decrease power.

To turn o the hotplate, slide your  nger along the power selection zone until 0 or H appears on the display.

NOTE:

You can set the timers in the same way as the hotplate power level settings.

EN - 7

04/2014

Detection of cookware

The detection of cookware function ensures the safe operation of the cooktop. The induction cooktop will not

function if:

- there is no cookware on the hotplate or if the cookware is not suitable for use on an induction cooktop.

In such acase, it will not be possible to set apower level and the display will show "U". The symbol will

disappear when you place the correct type of cookware on the hotplate.

- remove the cookware from the hotplate, operation will be ended. The display will show "U". This symbol

will disappear when you place the cookware back on to the hotplate. The cooking process will continue at

the set power level.

After  nishing cooking, turn o the hotplate. Do not allow the detection of cookware function to be activated

unnecessarily.

Residual heat indicator

The appliance is equipped with aresidual heat function. If the temperature of the hotplate is higher than 50 °C

after it is turned o , the letter "H" will appear on the display, indicating the danger of ahot hotplate. Wait until

the indicator (letter H) turns o . Otherwise there exists arisk of burns or a re.

Booster function

The appliance is equipped with aBooster function [P].

This function shortens the cooking time by setting the maximum power level for 5 minutes. This function is

suitable for speeding up the heating of large amounts of liquids or sauces.

To set the Booster function, slide your  nger along the power selection zone until the symbol P appears on

the display.

To turn o the Booster function, slide your  nger along the power selection zone until 0 appears on the display.

NOTE:

The cooktop is equipped with the maximum power output. If the booster function is activated, in order

for the maximum power level not to be exceeded, the electronic system will automatically set the power

of another hotplate to alower level. "9" will start  ashing on the display within afew seconds and then

the maximum permitted power level from "6" to "8" will appear.

Timer functions

The timer makes it possible to set the time after which the hotplate will automatically turn o in the range

from 1 to 99 minutes.

Setting and adjusting the cooking time

On the power selection zone select ahotplate for which you wish to set the timer. "0" will appear on the display.

Set the power level of the hotplate. Press the

button to select atimer and "00" will appear on the display.

Press the

button again and set the timer in 10-minute increments (10, 20, 30), then using your  nger, set

the timer in 1-minute increments on the power selection zone (31, 32, 33).

The time is con rmed and the countdown will be started.

EN - 8

04/2014

Stopping the cooking time

On the power selection zone select ahotplate for which you wish to cancel the timer. The remaining time will

be shown on the display. Press the

button, the remaining time will be shown again. To end the timer, press

the

button until "00" appears on the display.

Automatic shut o after the cooking time has elapsed

"00" will start  ashing on the display and asound will be made as soon as the timer duration is complete. To

cancel the sound signal, press the

button.

Minute timer

Turn on the cooktop. Press the button to select atimer and "00" will appear on the display. Press the

button again and set the timer in 10-minute increments (10, 20, 30), then using your  nger, set the timer in

1-minute increments on the power selection zone (31, 32, 33).

The time is con rmed and the countdown will be started.

Automatic cooking

All hotplates are equipped with the automatic cooking function. The selected hotplate will start cooking at full

power for acertain time and then automatically reduce the power to apreset power level.

To set the power level, slide your  nger along the power selection zone until "7" appears on the display. Hold

for approximately 3 seconds. Then "7" and "A" will  ash.

To turn o the function, move your  nger along the power selection zone from 0 to 9.

Pause function

This function makes it possible to temporarily turn o ahotplate and to turn it on again to the initial setting.

To turn on the function, press the II button for approximately 3 seconds. The display will show II. To turn o

the function, press the II button for approximately 3 seconds and use the power selection zone. The previous

setting will appear.

Memory

After turning o the cooktop using the 0/Ibutton, it is possible to renew the last setting, i.e.:

- settings of all hotplates;

- minutes and seconds of timers on selected hotplates;

- automatic cooking;

- keep warm function.

To renew the last settings, turn on the cooktop using the 0/Ibutton and then press the II button before the

indicator light stops  ashing. The last settings will be renewed.

EN - 9

04/2014

Keep warm function

This function enables the cooktop to reach and automatically maintain atemperature of approximately 70 °C.

In this way it prevents pots from boiling over as well as the burning of food.

To activate the function, slide your  nger along the power selection zone until Uappears on the display.

To deactivate the function, set the power level to "0" to "9".

Control panel lock

The appliance is equipped with a control panel lock function, which prevents accidental or undesirable

changes from being made on the hotplate control panel or the timer.

To activate the lock, turn on the appliance using the 0/Ibutton. Press and hold the II button and press the

button 3-times. "L" will appear on the display.

To deactivate the lock, turn on the appliance using the 0/Ibutton. Press and hold the II button and press the

button 3-times. "0" or "H" will appear on the display.

Principle of induction

An induction coil is located under each hotplate. When it is turned on, it creates avariable electromagnetic

 eld, which produces induction current in the ferromagnetic bottom part of the pot. The result is that the

bottom of the pot located on the hotplate is heated. For proper operation, it is necessary that the cookware is

ferromagnetic (you can verify this using asmall magnet), ideally cast iron, steel, enamelled, stainless steel with

aferromagnetic base.

Conversely, unsuitable cookware materials are copper, pure stainless steel, aluminium, glass, wood, ceramics,

stone, etc.

The hotplate on the induction cooktop automatically adjusts to the size of the cookware. However, this will not

work for cookware with adiameter that is too small. The diameter of the cookware depends on the diameter of

the hotplate. If the cookware is not detected by the hotplate, Uwill appear on the display.

Suitable cookware

Do not use cookware that has acoarse base because this base could scratch the glass ceramic surface. Suitable

cookware should have athick  at base. Before using and placing the cookware on the cooktop, check that the

base is clean and dry.

Place the cookware on the hotplate before turning it on.

Always use alid on the cookware. The cookware base should not be smaller or larger than the diameter of

the hotplate. To prevent wasting energy, the cookware should be at least as large as the hotplate - see picture

below.

EN - 10

04/2014

EN - 11

04/2014

Energy savings

• Place the cookware on the hotplate before turning it on. If you turn on the hotplate before placing the

cookware on it, the hotplate will not turn on and the display will show.

• To reduce the cooking time, use alid.

• As soon as the liquid starts to boil, lower the temperature.

• To shorten the cooking time, reduce the amount of water and fat to aminimum.

• Select the respective temperature for the given type of food.

NOTE:

Quality metal cookware is suitable for induction cooktops. Use amagnet to check whether the cookware

is suitable for induction cooking. If the magnet is attracted, the cookware is suitable for induction

cooking. If the magnet is repulsed then do not use such cookware.

Examples of power settings

(only arecommendation)

1 - 2

Melting

Heating

Sauces, butter, chocolate, gelatine

2 – 3

Mild heating

Defrosting

Rice, pudding, sugar syrup, dried vegetables,  sh, frozen

products

3 – 4 Steam cooking Vegetables,  sh, meat

4 – 5 Water For potatoes, soups, pasta, fresh vegetables

6 – 7 Medium heat Meat, eggs, smoked goods, goulash, roulades, o al

7 - 8 Cooking Potatoes, frying

9 Frying, grilling, boiling water Steaks, omelettes, fried meals, water

Booster Frying, grilling, boiling water Steaks, omelettes, fried meals, water

EN - 12

04/2014

PART 4: CLEANING AND MAINTENANCE

Before cleaning, check that the appliance is turned o , the power cord is disconnected from the power

socket, or if appropriate the circuit breaker to which the appliance is connected is disengaged.

Clean the cooktop before every use. This will prevent food remains from baking on.

For cleaning use special cleaning agents for glass ceramic cooktops, which can be used even if the cooktop is

still warm. Rinse and wipe dry using aclean wiping cloth or paper towel.

You can use a special scraper for the removal of baked on food. Sticky food (e.g. sugar) must be removed

immediately after being spilled, before the surface cools down.

The scraper is equipped with arazor blade that is very sharp. Be careful when using the scraper. Keep out of

the reach of children.

To remove baked on food, moisten asoft sponge and remove the baked on food using the moistened soft

sponge.

Do not use abrasive sponges, steel wool, caustic cleaning agents, cleaning agents in sprays or any sharp items

to clean the surface of the cooktop.

Do not use asteam cleaner to clean away food.

Regular maintenance will extend the lifetime of your cooktop.

EN - 13

04/2014

PART 5: INSTALLING THE APPLIANCE

Safety precautions

• The appliance MUST be installed in the correct manner from the technical point of view and in accordance

with this installation manual and according to valid local legal codes. The person performing the

installation is responsible for any damages caused by an inadequate installation.

• The appliance must only be connected by an authorised technician, who must follow the provisions of the

power company in the installation location.

• With respect to protection, the appliance is atype Iand may only be put into operation if the connection

is properly grounded.

• Serious injuries may result if this appliance is not correctly connected to agrounding clamp or is put into

operation without professional installation. The manufacturer is not responsible for incorrect use and

possible damages caused by an incorrect electrical installation.

• With respect to electrical protection, it is necessary to install type B or C fuses.

• If the appliance is not equipped with aplug, then it is necessary to install suitable means for disconnecting

it from the electricity grid in accordance with valid local installation codes.

• The power cord must be guided in such away that it does not touch the hot parts of the cooktop or

astove.

• Induction cooktops can only be installed above ovens with ventilation from the same manufacturer.

• A refrigerator, dishwasher, stove without ventilation or washing machine may not be installed

under the cooktop.

• If the cooktop is installed above adrawer, metal items located inside the drawer space could become

heated to ahigh temperature by the air circulation coming from the cooktop ventilation, so for this reason

we recommend the use of apartition panel.

• For asuitable partition panel you can use awooden board or purchase adequate accessories.

• Any tampering with the appliance, including the replacement of the power cord may only be performed

by an authorised service centre.

ATTENTION:

Neither the manufacturer, importer nor the distributor take any responsibility for damage resulting from

incorrect installation or connection.

Selecting the installation location

• Do not place any other appliance in the area up to 65 cm above the appliance.

• Arange hood must be installed according to the range hood manufacturer'sinstructions.

• The wall in the rear part of the installed cooktop must be made from an in ammable material.

• The length of the power cord must not exceed 2 metres.

EN - 14

04/2014

Requirements for the workbench

• The workbench must be straight and located horizontally. Perform the cut-outs into the built-

in furniture prior to installing the appliance. Remove all splinters and wood shavings otherwise

a malfunction of the electrical components could occur. At the same time ensure that after

performing the cut-out works, the stability of the furniture is not compromised.

• The surfaces of the cuts need to be treated so that they are resistant against temperature and moisture

(they could start swelling).

• Furniture intended for built-in appliances must be resistant to temperatures of up to 100°C.

• The minimum distance from the cut-out to the side wall must be: 40 mm. Do not locate the cooktop

between two side walls. If it is located in such away, it is necessary to maintain aminimum distance of 200

mm from one of the side walls.

• The minimum thickness of the workbench into which the installation is made is:

• 30 mm if the installation is above an oven;

• 20 mm if the installation is without an oven or above adrawer.

• For the ventilation of the cooktop, provide an opening in the top part of the rear wall of the furniture with

awidth of 45 mm and a20mm gap between the rear wall of the furniture and the kitchen wall. If you

will be installing the cooktop above adrawer, it is necessary to maintain aminimum distance of 65 mm

between the drawer and the top part of the workbench.

Positioning the cooktop in the workbench

Take the appliance out of the packaging and remove all advertising and promotional materials to check that

the appliance is not damaged. If the appliance is damaged or the power cord is damaged, do not use the

appliance and contact an authorised service centre.

Cut-out dimensions: 560 x 490 mm. Cut out an opening with the corresponding dimensions.

Apply single sided tape around the bottom edge of the cooktop - see picture below. Do not stretch too much.

Insert the cooktop into the cut-out hole in the workbench.

To ensure cooling, before inserting the oven, it is necessary to remove the rear kitchen panel in the location

where the oven is opened. The front part of the kitchen part must have ahole no smaller than 5 mm.

ATTENTION:

Under no condition should you glue this glass ceramic cooktop!

EN - 15

04/2014

Electrical connection

Before connecting the electrical wiring check that:

• The voltage indicated on the rating label of the appliance (in the rear part) is the same as the voltage in

your power socket.

• The circuit into which the appliance will be connected must cover the load of the given appliance (see

rating label).

• The power supply must be grounded in accordance with stipulated valid codes and must be in good

condition.

• The circuit breaker to which the appliance is connected must remain easily accessible.

• If neither the respective electrical circuit or circuit breaker are available, it is necessary to have one installed

by aquali ed electrician before installing and connecting the appliance.

The electrical wiring connection may only be performed by an authorised

service centre or by an electrical technician registered for this purpose!

An incorrect connection will lead to irreparable damage of the device, which may subsequently not be

acknowledged in awarranty claim.

Before connecting, have the voltage in your grid checked to ensure that it conforms to the voltage on the

rating label.

The consumer'sconnecting voltage (230 Vagainst N) must be veri ed by atechnician using ameasuring device.

The length of the power cord must be 1.5 m so that you can connect the device prior to moving it towards the wall.

Protective electrical lines must be performed according valid codes and norms.

The appliance may only be connected to a230 V~ 50/60 Hz power grid.

Only connect the appliance to agrounded power socket. Follow the electrical wiring instructions.

The terminal box is located under the rear part of the appliance. Use ascrewdriver to open it up.

Power socket Connections Power cord diameter Power cord Protection fuse

230 V~ 50/60 Hz 1 phase + N 3x 2.5 mm

H05 VV-F

H05 RR-F

25 A*

400 V~ 50/60 Hz 2 phase + N 4x 1.5 mm

H05 VV-F

H05 RR-F

16 A*

* calculated concurrently with the factor according to the norm EN 60335-2-6/1990

Connecting the cooktop

Setting the con guration:

For various types of connections, use brass jumpers located in the cabinet next to the terminals.

Single phase 230 V~ 1P+N

Place ajumper between terminals 1 and2. Ground by connecting to the grounding terminal, connect the

neutral N to terminal 4, phase L to one of the terminals 1 and2.

Two phases 400 V~ 2P+N

Ground by connecting to the grounding terminal, connect the neutral N to terminal 4, phase L1 to terminal 1

and phase L2 to terminal 2.

Warning:

Frequent tightening and releasing of screws may damage the e ectiveness of the tightening of once tightened

screws. We recommend that you handle the screws as little as possible to prevent damaging their threads.

Check that the screws are correctly inserted and tightened.

EN - 16

04/2014

PART 6: TROUBLESHOOTING

The cooktop or ahotplate did not turn on.

- The cooktop is incorrectly connected to the power grid.

- The protective fuse is disengaged.

- The lock function is activated.

- The touch buttons are coated with alayer of grease or water.

- There is aforeign object on the buttons.

The symbol Uis shown on the control panel display.

- There is no cookware located on the hotplate.

- The cookware on the hotplate is not suitable for induction cooktops.

- The size of the base is too small.

The symbol E is shown on the control panel display.

- Disconnect and reconnect the appliance.

- Contact an after-sales service centre.

One or all the hotplates are not working.

- The safety system was activated.

- You forgot to turn o the hotplates for along time.

- One or more touch buttons are covered.

- The cookware is empty and its base is overheated.

- The cooktop is also equipped with an automatic power level reduction function and an overheating

protection fuse.

Continuous ventilation after the cooktop is turned o .

- This is not afault, the fan protects the electrical components from overheating.

- The fan will stop automatically.

Automatic cooking did not start.

- The hotplate is too hot (H symbol).

- It is set to the highest cooking temperature (9).

The symbol II is shown on the display.

- See subchapter Pause function.

The symbol L is shown on the display.

- See subchapter Lock.

The symbol Uis shown on the display.

- See subchapter Keep warm.

The symbol

or Er03 is shown on the control panel display.

- An item or liquid is covering the control buttons. The symbol will disappear as soon as the buttons are

cleared or cleaned.

EN - 17

04/2014

The symbol E2 or EH is shown on the control panel display.

- The cooktop is overheated, allow it to cool down and then turn it on again.

The symbol E3 is shown on the control panel display.

- The used cookware is not suitable. Use di erent cookware.

The symbol E6 is shown on the control panel display.

- Power grid damaged. Check the frequency and the voltage of the electricity grid.

The symbol E8 is shown on the control panel display.

- The ventilation openings are clogged, unclog them.

If any of the symbols persist, please contact an authorised service centre.

EN - 18

04/2014

PART 7: TECHNICAL SPECIFICATIONS

MODEL PHD 6415R

Front left hotplate

Back right hotplate

Diameter: 200 mm

Nominal power output 2,300 W

Booster 3,000 W

Front right hotplate

Back left hotplate

Diameter: 180 mm

Nominal power output 1,100 W

Booster 1,400 W

Timer Yes

Pot detection Yes

Booster Yes

Total power input 7,400 W

Residual heat indicator Yes

Child Safety Lock Yes

Automatic shut o Yes

Shut o after over ow Yes

Stop & Go function Yes

Voltage 220/240 V~ 50/60 Hz

NOTE:

All the here provided data is subject to

change.

Stránka sa načítava ...

Philco PHD 6415R Používateľská príručka

Táto príručka je tiež vhodná pre

Philco PHD 6415R Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty