Panasonic SCNE5EG Návod na používanie

VQT4U60

until

2013/02/16

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Dziękujemy za zakupienie tego produktu.

Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie przeczytać niniejsze zalecenia i

zachować instrukcję obsługi do wglądu.

Děkujeme, že jste si zakoupil tento výrobek.

Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte pro pozdější použití.

Wireless Speaker System

System głośników bezprzewodowych

Bezdrátový reproduktorový systém

Model No. SC-NE5

Included Installation Instructions (l 3, 26–27)

The installation work should be done by a qualified installation specialist.

Before commencing work, carefully read these installation instructions and the operating instructions to ensure

that installation is performed correctly.

(Please keep these instructions. You may need them when maintaining or moving this system.)

Załączone instrukcje instalacji (l 33, 56–57)

Instalację powinien przeprowadzić wyłącznie wykwalifikowany specjalista.

Przed rozpoczęciem pracy należy się dokładnie zapoznać z instrukcją instalacji oraz z instrukcją obsługi, aby się

upewnić, że instalacja została przeprowadzona prawidłowo.

(Należy zachować tę instrukcję. Może ona być potrzebna podczas konserwacji lub przemieszczania systemu.)

Přiložené pokyny k instalaci (l 61, 84–85)

Instalační práce musí být provedeny kvalifikovaným instalatérským odborníkem.

Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a návod k obsluze, abyste instalaci provedli

opravdu správně.

(Uschovejte tento návod. Mohli byste jej potřebovat při údržbě nebo při manipulaci se systémem.)

EG

POLSKI ENGLISHČESKY

SC-NE5~VQT4U60.book 1 ページ２０１３年１月２２日　火曜日　午後１時３８分

2

VQT4U60

Table of contents

Safety precautions............................................ 3

Supplied items .................................................. 4

Unit and media care.......................................... 4

Playable media.................................................. 5

Control reference guide ................................... 6

Connections ...................................................... 8

Inserting media ................................................. 9

Network settings............................................. 10

Using AirPlay with this system’s speakers

......... 14

Playing back music files on the DLNA server

..... 15

Bluetooth

®

operations .................................... 16

About Bluetooth

®

............................................ 17

Media playback operations ............................17

Listening to the radio ..................................... 19

Sound adjustment........................................... 20

Clock and Timer .............................................. 20

Others .............................................................. 21

Troubleshooting.............................................. 23

Attaching the speaker unit to a wall (optional)

.... 26

Specifications.................................................. 28

About descriptions in these operating instructions

≥ Pages to be referred to are indicated as “l ±±”

≥ Unless otherwise indicated, operations are described using the remote control.

Android

TM

, Google Play

TM

, Google Chrome

TM

browser are trademarks or registered trademarks of Google Inc.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products and used batteries, please

take them to applicable collection points, in accordance with your national legislation and

the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where

you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

Cd

SC-NE5~VQT4U60.book 2 ページ２０１３年１月２２日　火曜日　午後１時３８分

3

VQT4U60

ENGLISH

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases, on

this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the plug.

– Do not use a damaged mains plug or socket outlet.

≥ The mains plug is the disconnecting device. Install this unit

so that the mains plug can be unplugged from the socket

outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not recharge,

disassemble, heat above 60

o

C or incinerate.

≥ Keep the Button-Type battery out of the reach of children.

Never put Button-Type battery in mouth. If swallowed call

your doctor.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

≥ Insert with poles aligned.

≥ Mishandling of batteries can cause electrolyte leakage and

may cause a fire.

– Remove the battery if you do not intend to use the remote

control for a long period of time. Store in a cool, dark place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥

When disposing the batteries, please contact your local authorities

or dealer and ask for the correct method of disposal.

NORSK

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser,

på apparatet.

– Bruk kun anbefalt tilbehør.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til

kvalifisert servicepersonell.

Vekselstrømnett

≥ Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan

trekkes fra stikkontakten.

Produkt

≥ Dette produktet anvender en laser. Betjening av kontroller

eller justering eller andre inngrep enn de beskrevet i denne

bruksanvisning kan føre til farlig bestråling.

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate

klimaforhold.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget

kabinett eller et annet lukket sted. Pass på at produktet er

godt ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med

aviser, duker, gardiner eller lignende.

WARNING

CAUTION

ADVARSEL

FORSIKTIG

Product Identification Marking is located on the bottoms of

the CD unit and the speaker unit.

SC-NE5~VQT4U60.book 3 ページ２０１３年１月２２日　火曜日　午後１時３８分

4

VQT4U60

Supplied items

∏ 1 CD unit

(SL-NE5)

∏ 1 Speaker unit

(SB-NE5)

Check the supplied accessories before using this

system.

Unit and media care

Pull out the AC mains lead from the outlet before

maintenance.

∫ Clean this system with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water tightly to

wipe the dirt, and then wipe it with a dry cloth.

≥ Never use alcohol, paint thinner or benzine to clean this

system.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

∫ Maintenance of the lens

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or

labels (rented discs etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this system

This system may keep the user settings information

internally. If you discard this system either by disposal

or transfer, then follow the procedure to return all the

settings to the factory presets to delete the user

settings. (l 23, “To return all settings to the factory

preset”)

≥ The operation history may be recorded in the

memory of this system.

This system (SC-NE5)

Accessories

∏ 1 Remote control

(with a battery)

(N2QAYC000090)

∏ 2 AC mains lead

∏ 1 FM indoor

antenna

Wall mounting accessories

∏ 1 Safety holder

∏ 1 Screw

∏ 2 Wall mount

brackets



≥ Do not use AC mains lead with other equipment.

≥ Product numbers provided in these operating instructions are

correct as of January 2013. These may be subject to change.

≥ Clean the lens regularly to prevent malfunctions. Use a

blower to remove dust and a cotton swab if it is extremely

dirty.

≥ You cannot use a CD type lens cleaner.

≥ Do not leave the door open for prolonged periods of time.

This will cause the lens to get dirty.

≥ Be careful not to touch the lens with your fingers.

DO DO NOT

Lens

SC-NE5~VQT4U60.book 4 ページ２０１３年１月２２日　火曜日　午後１時３８分

5

VQT4U60

ENGLISH

Playable media

Compatible with “IPOD_DOCK” connection

(Using Lightning connector)

Compatible with “IPOD_PORT” connection

[Using dedicated USB cable (not supplied)]

(as of January 2013)



≥ Compatibility depends on the software version. Update your

iPod/iPhone/iPad to the latest software before using it with

this system.

≥ Please be aware that Panasonic accepts no responsibility for

the loss of data and/or information.

≥ A disc with the CD Logo.

≥ This system can play back discs that conform to the CD-DA

format.

≥ This system may not be able to play some discs due to the

condition of the recording.

(as of January 2013)

≥ This system does not guarantee connection with all USB

devices.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This system supports USB 2.0 full speed.

≥ This system can support USB devices of up to 32 GB.

≥ Supported format: Files with the extension “.mp3” or “.MP3”.

≥ Compatible compression rate: Between 64 kbps and

320 kbps (stereo).

≥ Depending on how you create the MP3 files, they may not

play in the order you numbered them or may not play at all.

Creating MP3 files on a CD-R/RW

≥ Maximum number of tracks and albums: 999 tracks and 254

albums (Excluding Root folder).

≥ Disc formats: ISO9660 level 1 and level 2 (except for

extended formats).

≥ If the disc includes both MP3 and normal audio data

(CD-DA), this system plays the type recorded in the inner

part of the disc.

≥ This system cannot play files recorded using packet write.

Creating MP3 files on a USB device

≥ Maximum number of tracks and albums: 2500 tracks and 254

albums (Excluding Root folder).

≥ Only one memory card will be selected when connecting a

multiport USB card reader, typically the first memory card

inserted.

Compatible iPod/iPhone/iPad

iPod touch (5th generation)

iPod nano (7th generation)

iPhone 5

iPod touch

1st, 2nd, 3rd, 4th, and 5th generation

iPod nano

2nd, 3rd, 4th, 5th, 6th, and 7th generation

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /

iPhone 3G / iPhone

iPad (3rd, and 4th generation) / iPad 2 / iPad

iPad mini

Compatible CD

Compatible AirPlay devices

iOS 4.3.3 or later

iPod touch

3rd, 4th, and 5th generation

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS

iPad (3rd, and 4th generation) / iPad 2 / iPad

iPad mini

iTunes 10.2.2 or later (Mac / PC)

Compatible USB devices

Compatible MP3 files

SC-NE5~VQT4U60.book 5 ページ２０１３年１月２２日　火曜日　午後１時３８分

6

VQT4U60

Control reference guide

This system consists of the CD unit and the speaker unit. The both units are wirelessly connected when turned

on.

∫ CD unit

∫ Speaker unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode

or vice versa.

In standby mode, the unit is still consuming a small

amount of power.

≥ The CD unit and the speaker unit operate

simultaneously. Press either standby/on switch

to turn both units on or to standby mode.

Refer to page 23 when the units do not turn on

simultaneously.

2 Select the audio source

“CD”

---------.

“FM”

----------.

“BLUETOOTH”

----------.

“AUX”

^

“IPOD_PORT” / “USB”(

“IPOD_DOCK”(b

3

Basic playback control buttons

4 iPod port for iPod/iPhone/iPad and USB devices

(l 5, 9)

5 Adjust the volume (0 (min) to 50 (max))

6 Network setup button (l 11)

7 Standby/on indicator

While this system is turned on:

The indicator lights in green when the CD unit and

the speaker unit are connected successfully, blinks

in green when they are connecting, and lights in

red when they fail to connect.

8 Display

9 Open the CD lid

10 Dock for iPod/iPhone with Lightning connector

(l 9)

11 Remote control signal sensor

Distance: Within approx. 7 m directly in front.

≥ To avoid interference, please do not put any objects in

front of signal sensor.

12 WPS pairing button (l 10)

13 Wi-Fi

®

status indicator

8

9

11

10

Side view

VOLUME

2512

11

13

8

Top view

SC-NE5~VQT4U60.book 6 ページ２０１３年１月２２日　火曜日　午後１時３８分

7

VQT4U60

ENGLISH



≥The CD unit’s display turns off if the CD unit is left unused for more than 3 minutes and the audio selector is set

to an option other than “CD”, “IPOD_DOCK”, or “IPOD_PORT”. To turn the display on, press any button on

the CD unit, or select “CD”, “IPOD_DOCK”, or “IPOD_PORT” as an audio source.

≥Placing the CD unit and the speaker unit:

– Keep a minimum distance of 1 cm between the CD unit and the speaker unit when placing them.

– The distance between the CD unit and the speaker unit should be a maximum of 10 m. The range can decrease depending on

the environment, obstacles or interference.

– This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference

if this system is located too close to the devices that use the 2.4 GHz band.

– This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.

– Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example:

airports, hospitals, laboratories, etc).

∫ Remote control

1 Turn this system on or off

2 Select the audio source

[iPod/USB] :

“IPOD_DOCK”

,.

“IPOD_PORT” / “USB”

[CD/RADIO] : “CD” ,. “FM”

[, AUX] : “BLUETOOTH” ,. “AUX”

3

Basic playback control buttons

4 Enter setup menu

5 Enter the iPod/iPhone menu /

Change displayed information

6 Set the sleep timer

7 Change the brightness of the display panel

≥ Press to dim the display panel.

Press again to cancel.

8 Adjust the volume (0 (min) to 50 (max))

9 Mute the sound

Mutes the sound. Press again to cancel. “MUTE” is also

cancelled when the volume is adjusted or this system is

turned off.

10 Enter playback menu

11 Enter sound menu

12 Selection/OK

∫ Before using for the first time

Remove the insulation sheet A.

∫ To replace a button-type battery

Battery type: CR2025 (Lithium battery)

≥ Set the button-type battery with its (i) mark

facing upward.

≥ Keep the button-type battery out of reach of

children to prevent swallowing.

SLEEP

DIMMER

AUX

MUTE

PLAY MENU

SOUND

OK

ALBUM

iPod MENU

DISPLAY

SETUP

VOLVOL

iPod/

USB

CD/

RADIO



SC-NE5~VQT4U60.book 7 ページ２０１３年１月２２日　火曜日　午後１時３８分

8

VQT4U60

Connections

1 Connect FM indoor antenna (supplied) to the

speaker unit.

2 Connect the AC mains lead after all other

connections are completed.

≥ After connecting the AC mains lead to the mains socket, wait

for more than 15 seconds to turn on the Standby/on switch.

≥ When this system is turned on, the CD unit and the speaker

unit are connected wirelessly.

≥ When this system is turned on for the first time after

purchase, a message prompting you to connect a Bluetooth

®

device (“PAIRING”) is displayed. (l 16)

≥ This system consumes a small amount of AC power (l 28)

even when turned off.

≥ In the interest of power conservation, if you will not be using

this system for an extended period of time, unplug it from the

household mains socket.



≥ These speakers do not have magnetic shielding. Do not

place them near a television, personal computer or other

devices easily influenced by magnetism.

≥ Tape the antenna to a wall or column in a position with the

least amount of interference. (Use an FM outdoor antenna if

radio reception is poor.)

1 Plug the audio cable (not supplied) into the AUX

jack.

Plug type: ‰3.5 mm stereo

2 Press [ , AUX] to select “AUX” and start playback

on the connected device.

To select the sound input level of the

external device

1 While in AUX mode, press [PLAY MENU] to select

“INPUT LEVEL” and then press [OK].

2 Press [3, 4] to select “NORMAL” or “HIGH”.

≥ The default setting is “NORMAL”.



≥ Switch the equalizer off or turn the volume of the external

device down to reduce the input signal. High level of input

signal will distort the sound.

≥ For details, refer to the instruction manual of the other

equipment.

≥ The cables and the devices are not supplied.

If the CD unit and the speaker unit are not wirelessly

connected, or the output sound is interrupted, connect

the both units with two audio cables (plug type:

‰3.5 mm stereo, not supplied) as illustrated below.

≥ We recommend you use cables of less than 5 m.

≥ If the cables are connected, the displays show

“WIRED MODE” and this system starts wired

communication. This system automatically connects

wirelessly when the cables are disconnected.

Basic connection

Adhesive tape

(not supplied)

FM indoor antenna

(supplied)

To a household mains

socket

AC mains lead

(supplied)

Connect an external music device (for

AUX mode)

Connect the CD unit and the

speaker unit with cables (optional)

Audio cable (not supplied)

SC-NE5~VQT4U60.book 8 ページ２０１３年１月２２日　火曜日　午後１時３８分

9

VQT4U60

ENGLISH

Inserting media

≥ Make sure that the unit does not fall when inserting or

removing media.

≥ When moving this unit, be sure to remove all media and turn

this unit to standby mode.

*1: Refer to “Playable media” for compatible models. (l 5)

*2: When using the “IPOD_PORT” connection, do not connect

the following models to this unit:

– iPod classic, iPod [4th (colour display), and 5th (video)

generation], iPod nano (1st generation)

Unexpected behaviour may occur.

*3: When using the “IPOD_DOCK” connection:

≥ Be sure to remove the iPod/iPhone from its case.

≥ Make sure that the iPod/iPhone is fully inserted and its

back is resting against the cushion pad.

≥ Make sure to hold the dock when removing the iPod/

iPhone.

*4: Use the “IPOD_PORT” connection to charge the iPad.

 

1 Press [CD <] to open the lid on the back of the CD unit.

≥ Leave a space more than 10 cm behind the unit.

≥ Do not place any objects behind the unit.

2 While holding the unit, push the centre of the CD until it clicks into place, and then close the CD lid.

≥ Be careful not to scratch the CD.

≥ Make sure you place the centre of the CD onto the CD spindle of the unit.

Note: Remove the CD only after it stops rotating.

Connect an iPod/iPhone/iPad

*1, 2

or USB device

∫ Charging an iPod/iPhone/iPad

*4

Charging starts when an iPod*

2

/iPhone/iPad is

connected to this unit.

≥ During standby mode, charging will not start from the USB

cable connection, however it will start as usual from the

Lightning connector.

– To charge from the USB cable connection, start the charging

before turning this unit to standby mode.

≥ Check the iPod/iPhone/iPad to see if the battery is fully

charged. (Once fully recharged, additional recharging will not

occur.)

≥ If this unit is switched to standby mode “IPOD CHARGING” is

shown on the unit’s display.

Connect an iPod/iPhone with

Lightning connector*

1

Inserting a disc

Select “IPOD_PORT” as the source.

≥ When connecting an iPod/iPhone/iPad, use the dedicated

USB cable (not supplied).

≥ “USB” is displayed when a compatible USB device is

inserted.

≥ Insert the USB device directly. Do not use any USB

extension cable.

≥ Before removing the USB device, select a source other than

“USB”.

*3

Select “CD” as the source.

Select “IPOD_DOCK” as the source.

10 cm

The label side

SC-NE5~VQT4U60.book 9 ページ２０１３年１月２２日　火曜日　午後１時３８分

10

VQT4U60

Network settings

You can wirelessly stream music from an iOS device

(iPhone, iPod, iPad), an Android device or a Mac/PC to

this system’s speakers by using the AirPlay or DLNA

feature.

To use these features, this system must join the same

2.4 GHz wireless network as the AirPlay

compatible device (l 5

) or the DLNA compatible

device.

≥ It is also possible to use AirPlay without a wireless network

router. (l 14, “Directly streaming to this system (AirPlay)”)

Preparation

≥ Place this system close to the wireless network

router.

1 Turn this system on.

2 Follow the chart below to choose the network

setting method.

≥ If you want to perform wireless setting with your

Mac/PC, or you want to apply the advanced

setting, try “Method 4” on page 12.



≥ To cancel this setting in the middle, press [Í] to turn off this

system.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

≥ For up to date compatibility information on your wireless

network router refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

∫ Using the WPS Push Button

Configuration (PBC)

1 Press and hold [s WPS] on the speaker unit.

{. “WPS” flashes on the display.

(The Wi-Fi status indicator blinks blue.)

≥ Complete step 2 within 2 mins.

2 After “WPS” is indicated, press the WPS button on

the wireless network router.

3 The settings are completed when “SUCCESS” is

displayed and the Wi-Fi status indicator stops

blinking and lights in blue.

4 Press [OK] on the remote control to exit the

setting.



≥ To use the WPS PIN code, refer to the notes on page 13.

Does your wireless network router

support WPS?

Yes

l right,

“Method 1”

l 11,

“Method 2”

l 12,

“Method 3”

No / Do not know

Yes No

Are you using an

iPod touch/iPhone/iPad?

Is the iOS version 5.0 or later?

Method 1

If your wireless network router supports WPS

(Wi-Fi Protected Setup

TM

).

The WPS identifier mark

WPS Push Button Configuration

(PBC) compatible wireless

network router may have this

mark.

“FAIL” may be displayed if the connection was not

made within the set time limit. Try the setting again.

If “FAIL” is still displayed, try other methods on page

11 or 12.

SC-NE5~VQT4U60.book 10 ページ２０１３年１月２２日　火曜日　午後１時３８分

11

VQT4U60

ENGLISH

With this method you will share the wireless network

settings of your iPod touch/iPhone/iPad with this

system.

≥ The following explanations are based on an iPhone.

1 Disconnect any devices connected to the CD unit.

2 Connect the iPhone to your home wireless

network.

3 Connect the iPhone to the CD unit.

Choose one of the following connections.

“IPOD_DOCK” connection compatible iPod touch/

iPhone:

iPod touch/iPhone/iPad with iOS 5.0 or later:

Connect to the iPod port on the side of the CD unit

with a dedicated USB cable.

4 Unlock your iPhone and then press and hold

[sNETWORK SETUP] on the CD unit for more

than 3 seconds.

≥ If “NOT SUPPORTED” or “SET WI-FI” is displayed,

check that the iPhone is connected to the wireless

network and try again from step 1.

5 A message will pop-up on your iPhone.

Allow the iPhone to share the wireless network

settings.*

1

{. The Wi-Fi status indicator blinks.

6 The settings are completed when “SUCCESS” is

displayed and the Wi-Fi status indicator stops

blinking and lights in blue.

7 Press [OK] on the remote control to exit the

settings.

*1: Depending on the network environment or the wireless

network router settings, it may take more than 10 mins. to

complete the settings.

Method 2

If you're using an iPod touch/iPhone/iPad.

(iOS version 5.0 or later.)

If “FAIL” is displayed press [OK] and try the setting

again. If “FAIL” is still displayed, try other methods on

page 10 or 12.

≥ If the iPhone was disconnected midway through, try again

without disconnecting it.

SC-NE5~VQT4U60.book 11 ページ２０１３年１月２２日　火曜日　午後１時３８分

12

VQT4U60

You can make the wireless network settings with the

app, “Panasonic Stereo System Network Setup” (for

free).

If you’re using an Android device, download the app at

the Google Play Store. If you’re using an iPod touch/

iPhone/iPad

, download it at the App Store.

Preparation

≥ Connect your smartphone to your home wireless

network.

≥ Check the password for your home wireless network.

1 Press [SETUP] on the remote control repeatedly

to select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi status indicator blinks purple.)

2 Start “Panasonic Stereo System Network

Setup” on your smartphone and follow the

indications.

∫ Note for the iOS version

After step 2

1 Enter the password for the home wireless network

to which the iOS device is connected.

2 When a message instructing you to connect the

iOS device to this system is displayed, press the

home button to close the app.

3 On the Wi-Fi network selection screen in

“Settings”, select “00 Setup _ _ _ _ _ _”.

≥ “ _ ” stands for a digit that is unique to each set.

4 When a message indicating the completion of the

connection to this system is displayed, restart the

app.

5 When a message indicating the completion of the

Wi-Fi setup of this system is displayed, close the

app, and then check the operation of AirPlay, etc.



≥ “Panasonic Stereo System Network Setup” for Mac OS is

also available at the App Store.

With this method, you will access this system’s

wireless network settings from the Internet browser of

your compatible device.

≥ The following explanations are based on an iPhone.

1 Press [SETUP] on the remote control repeatedly

to select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi status indicator blinks purple.)

2 After “SETTING” is indicated, connect your

compatible device to this system’s wireless

network named “00 Setup _ _ _ _ _ _”.

≥ “ _ ” stands for a digit that is unique to each set.

≥ Make sure that DHCP is enabled for the network setting

on your compatible device.

3 Start the Internet browser on your compatible

device and type “http://192.168.1.12/” into the

URL address field and display the page.

{. This system’s setup window is displayed.

≥ Examples of Internet browsers

iOS device/Mac : Safari

Android device : Google Chrome browser

PC : Windows Internet Explorer

4 Select “Search wireless network”.

Method 3

Setting the network connection with the smartphone

app.

Method 4

Setting the network connection from an Internet

browser.

SC-NE5~VQT4U60.book 12 ページ２０１３年１月２２日　火曜日　午後１時３８分

13

VQT4U60

ENGLISH

5 Select and input the details.

≥ Check your home wireless network name (Network

name (SSID)) and password for this network. This can

often be found on the wireless network router itself.

6 Select “JOIN” to apply the settings.

≥ In the pop-up screen, select “OK” to continue.

– Select “Cancel” to return to the setup window.

7 The settings are completed when “SUCCESS” is

displayed and the Wi-Fi status indicator stops

blinking and lights in blue.

8 Make sure to connect your compatible device back

to your home wireless network.

*1: If you have set your wireless network to be invisible, select

“BACK” and refer to “Alternative settings”.

≥ The below settings are the alternative or additional settings

for “Method 4”.

(l 12)



≥ Enable Java and Cookies in your browser settings.

≥ This system can also be set using the WPS PIN code.

Replace step 2 of “Method 1” with the following steps.

(Before starting, refer to the wireless network router’s

operating instructions for details on how to enter the PIN

code.)

1 While “WPS” is flashing press and hold [s WPS] again

to display the 8 digit PIN code.

{. Wi-Fi status indicator blinks purple.

2 Enter the PIN code into the wireless network router.

[1] Select your home wireless network name.*

1

[2] Type the password.

If “FAIL” is displayed press [OK], check the wireless

network password and other settings and start again

from step 1.

Advanced network settings

Alternative settings

Instead of steps 4 and 5

Select “Manual settings”.

1 Type your home wireless network name into

the “Network name (SSID)” field.

2 Select the encryption method from the

“Security system” drop down list.

3 Type the password into the “Password” field

and then select “JOIN”.

Additional settings

If your home wireless network has been configured

to use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Before step 6

Select “Advanced network settings”.

{. Input the required addresses into each field and select

“JOIN”.

≥ To change the settings back to DHCP, select “ON” from the

“DHCP” drop down list.

If you want to change the name of this system

that is displayed as the AirPlay speakers or DLNA

renderer.

Before step 4

Select “Additional settings”.

1 Select “Edit STEREO SYSTEM name”.

2 Type a new name into the

“STEREO SYSTEM name” field.

{. Only ASCII characters can be used.

3 Select “OK”.

4 If this system is already connected to your home

wireless network:

–Select “Additional settings”, and then select

“Exit“.

If this system is not connected to your home

wireless network:

jContinue to step 4 of “Method 4”.

SC-NE5~VQT4U60.book 13 ページ２０１３年１月２２日　火曜日　午後１時３８分

14

VQT4U60

Using AirPlay with this

system’s speakers

1 Turn this system on.

≥ Check that the Wi-Fi status indicator lights in

blue.

≥ If it doesn’t light in blue, check the wireless

network settings. (l 10)

2 iOS device: Start the “Music” (or iPod) app.

Mac/PC: Start “iTunes”.

≥ If the Music app on your iOS device is used, select the

audio file you want to play.

3 Select “Panasonic NE5 _ _ _ _ _ _”*

1, 2

from the

AirPlay icon.

{. Check the volume settings before starting the playback.

(When AirPlay is used for the first time, the volume may

be output at the maximum setting.)

4 Start play.

≥ The playback will start with a slight delay.



≥ This system can be set to turn on automatically when this

system is selected as the output speakers. (l 22)

≥ Playback of other audio sources will stop and AirPlay output

will have priority.

≥ Volume changes on the iOS device or iTunes will be applied

to this system. (Refer to the iTunes Help for the required

settings in iTunes.)

≥ With some iOS and iTunes versions, it may not be possible

to restart the AirPlay playback if the selector is changed

(e.g., “CD”) or this system is turned off, during the AirPlay

playback.

In this case, select a different device from the AirPlay icon of

the Music App or iTunes and then re-select this system as

the output speakers.

≥ AirPlay will not work when playing back videos on iTunes.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this system can be changed

from the “Edit STEREO SYSTEM name” settings.

(l 13, “Advanced network settings”)

With this function set to “ON”, you can stream music

from the iOS device or Mac / PC (iTunes 10.2.2 or

later) to this system without the need of a wireless

network router.

≥ Previous network settings will be deleted when this

function is set to “ON”.

≥ The following explanations are based on an iPhone.

1 Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “ON” and then press [OK].

3 Press [3, 4] to select “OK? YES” and then press

[OK].

4 Connect your iPhone to this system’s wireless

network named “NE5 _ _ _ _ _ _”*

2

.

5 Enter the password that is indicated on this

system’s display.

6 Once the iPhone is connected to this system’s

wireless network, the setup is competed.

7 Continue to step 2 of “Using AirPlay with this

system’s speakers”.



≥ This setting is reset to “OFF” when other network settings are

performed. (l 10)

≥ When “D.CONNECT” is set to “ON”, this system will not be

connected to the Internet. It is not possible to update the

software or check the Wi-Fi signal strength.

≥ When AirPlay is not being used, disconnect the AirPlay

compatible device from this network.

≥ When using a computer on this network, make sure that all

the shared files are encrypted.

≥ This feature is only compatible with the “Open System”

authentication method. It is not compatible with “Shared Key”

authentication method.

*1: “ _ ” stands for a digit.

*2: “ _ ” stands for a digit that is unique to each set.

Preparation

≥ Complete the network settings. (l 10)

≥ Connect the iOS device or Mac/PC to the same

home wireless network as this system.

NE5

e.g.,

iPhone iOS 6.0.1

NE5

e.g.,

iTunes 11.0

Directly streaming to this system

(AirPlay)

“PW _ _ _ _ _”*

1

is displayed.

The 5 digits after “PW” is the password for this

network.

SC-NE5~VQT4U60.book 14 ページ２０１３年１月２２日　火曜日　午後１時３８分

15

VQT4U60

ENGLISH

The first time “D.CONNECT” is set to “ON”, a

password for this system’s wireless network is

randomly created and memorised in this system.

≥ This password is memorised until it is changed.

1 While “D.CONNECT” is set to “ON”:

Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “ON” and then press [OK].

3 The current password is displayed.

≥ The 5 digits after “PW” is the password for this

network.

4 Press any button to exit.

1 While “D.CONNECT” is set to “OFF”:

Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “CHANGE PW” and then

press [OK].

3 Press [3, 4] to select “OK? YES” and then press

[OK].

4 The new password is displayed.

≥ The 5 digits after “PW” is the new password for

this network.

5 Press any button to exit.

∫ Note about changing the password

After changing this system’s wireless network

password, if you are not prompted to change the

password on the other devices, the following changes

are required.

iOS device (iPod touch/iPhone/iPad)*

1

:

≥ Before choosing this system’s network,

1 Select [ ] located beside this system’s wireless

network name.

2 Select “Forget this Network” and then select

“Forget”.

3 Select this system’s wireless network and enter

the new password.

Mac/PC:

≥ If the computer has memorised the old password, be

sure to change the memorised password for this

system’s wireless network to the new one.



≥ Refer to the devices’s operating instructions for details.

*1:

Steps are based on iOS 6.0.1.

Playing back music files on the

DLNA server

You can share music files stored in the DLNA Certified

media server (PC with Windows 7 installed,

smartphone, etc.) connected to your home wireless

network, and enjoy the contents with this system’s

speaker.

1 Turn this system on.

≥ Check that the Wi-Fi status indicator lights in

blue.

≥ If it doesn’t light in blue, check the wireless

network settings. (l 10)

2 Operate the DMC compatible device and connect

to this system.

≥ The device name of this system will be

displayed as “Panasonic NE5 _ _ _ _ _ _”*

1, 2

.

≥ For details on how to use DMC compatible

devices, refer to the operating instructions of the

devices or the software.

∫ Support format of DLNA client

File formats that are not supported by your DLNA

server cannot be played.



≥ Depending on the contents and the connected equipment,

playback may not be possible.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this system can be changed

from the “Edit STEREO SYSTEM name” settings.

(l 13, “Advanced network settings”)

Display the password

Change the password

Preparation

≥ Complete the network settings. (l 10)

≥ Connect your device with DMC (Digital Media

Controller) compatible software installed to the

same home wireless network as this system.

≥ Add the contents and folder to the libraries of the

Windows Media

®

Player or the smartphone, etc.

– Playlist of Windows Media

®

Player can play back only

the contents that are stored in the libraries.

Audio codec Example of file extension

MP3 .mp3

WAV .wav

SC-NE5~VQT4U60.book 15 ページ２０１３年１月２２日　火曜日　午後１時３８分

16

VQT4U60

Bluetooth

®

operations

By using the Bluetooth

®

connection, you can listen to the sound from the Bluetooth

®

audio device from this system

wirelessly.

≥Refer to the operating instructions of the Bluetooth

®

device for details.

Preparation

≥ Turn on the Bluetooth

®

feature of the device and

place the device near the speaker unit.

≥ If this system is already connected to a Bluetooth

®

device, disconnect it.

1 Press [ , AUX] to select “BLUETOOTH”.

≥ If “PAIRING” is indicated on the display, go to

step 3.

2 Press [PLAY MENU] to select “NEW DEV.” and

then press [OK].

{. “PAIRING” is indicated on the display.

3 Select “SC-NE5” from the Bluetooth

®

device’s

Bluetooth

®

menu.

4 Start play on the Bluetooth

®

device.



≥ If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this system. If a 9th

device is paired, the device that has not been used for the

longest time will be replaced.

Preparation

≥ Turn on the Bluetooth

®

feature of the device and

place the device near the speaker unit.

≥ If this system is already connected to a Bluetooth

®

device, disconnect it.

1 Press [ , AUX] to select “BLUETOOTH”.

{. “READY” is indicated on the display.

2 Select “SC-NE5” from the Bluetooth

®

device’s

Bluetooth

®

menu.

{. The name of the connected device is indicated on the

display for 2 seconds.

3 Start play on the Bluetooth

®

device.



≥ This system can only be connected to one device at a time.

≥ When “BLUETOOTH” is selected as the source, this system

will automatically try and connect to the last connected

Bluetooth

®

device.

≥ The Bluetooth

®

device will be disconnected if a different

audio source (e.g., [CD]) is selected.

You can change the transmission speed to prioritize

transmission quality or sound quality.

Preparation

≥ Press [ , AUX] to select “BLUETOOTH”.

≥ If a Bluetooth

®

device is already connected,

disconnect it.

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [3, 4] to select the mode and then press

[OK].

MODE 1: Emphasis on connectivity

MODE 2: Emphasis on sound quality



≥ The default setting is “MODE 1”.

If the sound input level of the Bluetooth

®

transmission

is too low, change the input level setting.

Preparation

≥ Connect a Bluetooth

®

device.

1 Press [PLAY MENU] repeatedly to select “INPUT

LEVEL”.

2 Press [3, 4] to select the level and then press

[OK].

“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”

^-------------------------------------------------J



≥ Select “LEVEL 0” if the sound is distorted.

≥ The default setting is “LEVEL 0”.

1 While a Bluetooth

®

device is connected:

Press [PLAY MENU] to select “DISCONNECT?”.

2 Press [3, 4] to select “OK? YES” and then press

[OK].

Pairing Bluetooth

®

devices

Connecting a paired Bluetooth

®

device

Bluetooth

®

transmission mode

Bluetooth

®

input level

Disconnecting a Bluetooth

®

device

SC-NE5~VQT4U60.book 16 ページ２０１３年１月２２日　火曜日　午後１時３８分

17

VQT4U60

ENGLISH

About Bluetooth

®

∫ Frequency band used

≥ This system uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

≥ The actions below are punishable by law in some

countries:

– Taking apart or modifying this system.

– Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all

Bluetooth

®

equipped devices is not guaranteed.

≥ All devices must conform to standards set by

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a

device, it can fail to connect or some operations can

be different.

≥ This system supports Bluetooth

®

security features.

But depending on the operating environment and/or

settings, this security is possibly not sufficient.

Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

®

device.

∫ Range of use

≥ Use this device at a maximum range of 10 m. The

range can decrease depending on the environment,

obstacles or interference.

∫ Interference from other devices

≥ This system may not function properly and troubles

such as noise and sound jumps may arise due to

radio wave interference if this system is located too

close to other Bluetooth

®

devices or the devices that

use the 2.4 GHz band.

≥ This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too

strong.

∫ Intended usage

≥ This system is for normal, general use only.

≥ Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals,

laboratories, etc).

Media playback operations

The following marks indicate the availability of the

feature.

Preparation

≥ Turn this system on.

≥ Insert the media (l 9) or connect the Bluetooth

®

(l 16) / AirPlay (l 14) compatible device.

≥

Press [CD/RADIO], [iPod/USB] or

[, AUX]

to select

the audio source.



≥ When using iPod/iPhone/iPad, the operation may vary

among those models.

[CD], [USB] To display information

Press [DISPLAY, iPod MENU] repeatedly.

Panasonic bears no responsibility for data and/

or information that is compromised during a

wireless transmission.

[CD] : CD audio in CD-DA format and a CD

that contains MP3 files (l 5)

[iPod] : Compatible iPod/iPhone/iPad (l 5)

[USB] : USB devices containing MP3 files

(l 5)

[AirPlay] : When connected to an AirPlay

compatible device. (l 14)

[Bluetooth] :

Connected Bluetooth

®

device (l 16)

Basic play

([CD], [iPod], [USB], [AirPlay], [Bluetooth])

Play Press [1/;].

Stop Press [∫].

≥ [USB]: The position is memorised

and “RESUME” is displayed.

Pause Press [1/;].

Press again to restart play.

Skip Press [:/6] or [5/9]

to skip track.

[CD], [USB] Press [3] or [4] to

skip the MP3 album.

Search

(Except [AirPlay])

During play or pause

Press and hold [:/6] or

[5/9].

≥ Point the remote control at the

CD unit to operate.

≥ [iPod] : Backwards search is only

within the current track.

SC-NE5~VQT4U60.book 17 ページ２０１３年１月２２日　火曜日　午後１時３８分

18

VQT4U60



≥ To use this system’s remote control with a Bluetooth

®

device,

the Bluetooth

®

device must support AVRCP (Audio Video

Remote Control Profile).

Depending on the device or the status of the device, some

operations may not work.

≥ Maximum number of displayable characters: approx. 30

≥ This system supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data

that is not supported will not be displayed or shown

differently.

≥ Album and track indication for MP3 files.

∫ [iPod] To navigate through the iPod/

iPhone menu

≥ Open the Music App to use this feature with iPod touch/

iPhone.

–[3, 4] : To navigate menu items.

– [OK] : To go to the next menu.

– [DISPLAY, iPod MENU] : To return to the previous

menu.



≥ Depending on the model (e.g., iPod nano 7th generation,

etc.), it may be necessary to select the album, artist, etc. on

the iPod/iPhone.

Select the playback mode.

1 Press [PLAY MENU] to select “REPEAT”,

“RANDOM” / “SHUFFLE” or “PLAYMODE”.

2 Press [3, 4] to select the setting and then press

[OK].



≥ When using an iPod/iPhone/iPad or Bluetooth

®

device, use

the setting on the device, if available.

≥ During random play, you cannot skip to the previous track.

≥ [CD] : The mode is cancelled when you open the door for

discs.

[AirPlay] : The applied settings will remain until it is changed.

*1: [AirPlay] : Perform the settings during playback.

“A _ _ _”: MP3 album number.

“T _ _ _”: MP3 track number.

≥ “ _ ” stands for the album or track number.

“”:

This indication is also used to refer to an

album.

“”:

This indication is also used to refer to a

track.

Playback modes ([CD], [USB], [AirPlay]*

1

)

REPEAT

[CD] [USB]

OFF Select to cancel repeat playback.

1-TRACK Only plays the selected track.

≥ “1, , `” is displayed.

(Skip to the desired track.)

ALL All tracks are repeated.

≥ “`” is displayed.

[AirPlay]

Refer to the connected device to verify the

selected setting.

[CD] [USB] RANDOM

ON Plays the contents randomly.

≥ “RND” is displayed.

≥ “RND” will not be displayed when

“1-TRACK” is selected.

OFF Random playback is turned off.

[AirPlay] SHUFFLE

Refer to the connected device to verify the selected

setting.

[CD] (MP3) [USB] PLAYMODE

ALL Play all MP3 tracks.

1-ALBUM Only plays the selected MP3 album.

≥ “1, ” is displayed.

SC-NE5~VQT4U60.book 18 ページ２０１３年１月２２日　火曜日　午後１時３８分

19

VQT4U60

ENGLISH

Listening to the radio

You can preset up to 30 channels.

Preparation

≥ Make sure that the antenna is connected. (l 8)

≥ Turn this system on.

≥ Press [CD/RADIO] repeatedly to select “FM”.



≥ A station previously stored is overwritten when another

station is stored in the same channel preset.

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [3, 4] to select “LOWEST” or “CURRENT”

and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency

(FM 87.50).

CURRENT:

To begin auto preset with the current frequency.*

* To change the frequency, refer to “Manual tuning and

presetting”.

The tuner starts to preset all the stations it can

receive into the channels in ascending order.

Preparation

1 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2 Press [3, 4] to select “PRESET” and then press

[OK].

Press [:/6] or [5/9] to select the channel.

∫ Manual tuning and presetting

Select a radio broadcast.

1 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2 Press [3, 4] to select “MANUAL” and then press

[OK].

3 Press [:/6] or [5/9] to tune to the

required station.

≥ To start automatic tuning, press and hold [:/6],

[5/9] until the frequency starts scrolling. Tuning

stops when a station is found.

To preset the channel

4 While listening to the radio broadcast

Press [OK].

5 Press [3, 4] to select the channel and then press

[OK].

∫ To improve FM sound quality

1 While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select “FM MODE”.

2 Press [3, 4] to select “MONO” and then press

[OK].

≥ This setting can be preset and memorised. To do so,

continue to step 4 of “Manual tuning and presetting”.



≥ Select “STEREO” in step 2 to return to stereo broadcasts.

≥ “MONO” is cancelled if the frequency is changed.

≥ If “MONO” is selected, regardless of the type of signal this

system is receiving, “FM MONO” is displayed. (l below)

∫ To display the current signal status

Press [PLAY MENU] to display “FM STATUS” and then

press [OK].

∫ To display RDS text data

Press [DISPLAY, iPod MENU] to display the text data.

≥ Each time you press the button:



≥ “STEREO” is displayed when this system tunes to a stereo

broadcast.

≥ This system can display the text data transmitted by the radio

data system (RDS) available in some areas. (RDS displays

may not be available if reception is poor.)

Presetting stations automatically

Listening to a preset channel

“FM ST”: The FM signal is in stereo.

“FM”: The FM signal is in monaural.

≥ “FM” is also displayed even if this system is not tuned to

a station.

“PS”: Programme service

“PTY”: Programme type

“FREQ”: Frequency display

SC-NE5~VQT4U60.book 19 ページ２０１３年１月２２日　火曜日　午後１時３８分

20

VQT4U60

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect.

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

Clock and Timer

To make this setting, point the remote control at

the speaker unit.

This is a 24-hour clock.

1 Press [SETUP] to select “CLOCK”.

2 Press [3, 4] to set the time and then press [OK].



≥ To display the clock, press [SETUP] to select “CLOCK” and

then press [OK] once. The time is displayed for 10 seconds.

(During standby, press [DISPLAY, iPod MENU] once.)

≥ The clock is reset when there is a power failure or when the

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

You can set the timer so this system turns on at a

certain time every day.

Preparation

Set the clock (l left).

∫ Setting the timer

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [3, 4] to set the starting time

(“ON TIME”) and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].

∫ Turn the timer on

1 Select the music source*

1

and set the desired

volume.

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [3, 4] to select “SET” and then press [OK].

≥ “F” is displayed.

≥ To turn the timer off, select “OFF”.

4 Press [Í] to turn this system off.



≥ To display the timer settings, press [SETUP] repeatedly to

select “TIMER ADJ” and then press [OK] once.

The music source and volume will also be displayed if the

timer is turned on.

≥ During standby, if the timer is turned on, press [DISPLAY,

iPod MENU] twice to display the settings.

≥ This system can be used as normal after the timer is set,

however:

– Turn this system to standby mode before the timer start

time.

– Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that was

set when the timer was turned on.

≥ If this system is having a wireless communication problem at

the set time, an electronic sound may go off instead of the

set music source. Turn this system off to stop the electronic

sound.

*1: “CD”, “FM”, “AUX”, “IPOD_DOCK” and

“IPOD_PORT” / “USB” can be set as the music source.

The sleep timer can turn this system off after a set

time.

1 Press [SLEEP] repeatedly to set the time (in

minutes) and then press [OK].

“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120”

^------------------------ OFF (Cancel) (------------------------b

≥ The remaining time is indicated on this system’s display

except when other operations are performed.

≥ The play timer and sleep timer can be used together. The

sleep timer always has priority.

Direct-Vocal

Surround

(D.SURROUND)

“LEVEL 1”, “LEVEL 2” or “OFF”.

≥ The factory preset is “OFF”.

Preset EQ

(PRESET EQ)

“HEAVY” (heavy), “SOFT” (soft),

“CLEAR” (clear), “VOCAL”

(vocal) or “FLAT” (flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or

Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass

(D.BASS)

“ON D.BASS” or

“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

Setting the clock

Play timer

Sleep timer

SC-NE5~VQT4U60.book 20 ページ２０１３年１月２２日　火曜日　午後１時３８分

Stránka sa načítava ...

Panasonic SCNE5EG Návod na používanie

Panasonic SCNE5EG Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty