Dometic RTX1000, RTX2000, SPX1200TC, SPX1200IC Návod na používanie

  • Prečítal som si používateľskú príručku pre parkovacie klimatizácie Dometic RTX1000, RTX2000, SPX1200TC a SPX1200IC. Som pripravený odpovedať na vaše otázky týkajúce sa prevádzky, funkcií a nastavení tohto zariadenia. Príručka obsahuje informácie o rôznych prevádzkových režimoch, nastavovaní teploty a časovača, ako aj riešení problémov.
  • Ako zapnem parkovaciu klimatizáciu?
    Aké režimy prevádzky sú k dispozícii?
    Ako nastavím požadovanú teplotu?
    Ako funguje časovač?
    Čo mám robiť v prípade chybových hlásení?
RTX1000, RTX2000, SPX1200TC,
SPX1200IC
Parking cooler
Operating manual . . . . . . . . . . . . . . . . . . . . .6
Standklimaanlage
Bedienungsanleitung . . . . . . . . . . . . . . . . .28
Climatiseur auxiliaire
Notice d’utilisation . . . . . . . . . . . . . . . . . . . 51
Equipo de aire acondicionado a
motor parado
Instrucciones de uso . . . . . . . . . . . . . . . . . .75
Unidade fixa de ar condicionado
Manual de instruções . . . . . . . . . . . . . . . . .99
Climatizzatore a motore spento
Istruzioni per l’uso . . . . . . . . . . . . . . . . . . .124
Standairco
Gebruiksaanwijzing. . . . . . . . . . . . . . . . . .149
Standairco
Betjeningsvejledning . . . . . . . . . . . . . . . .172
Motoroberoende klimatanggning
Bruksanvisning. . . . . . . . . . . . . . . . . . . . . .194
Klimaanlegg
Bruksanvisning . . . . . . . . . . . . . . . . . . . . . 216
Ilmastointilaite
Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . .238
Klimatyzator postojowy
Instrukcja obsługi . . . . . . . . . . . . . . . . . . . 259
Prídavné klimatizačné zariadenie
Návod na obsluhu. . . . . . . . . . . . . . . . . . . 282
Nezávislá klimatizace
Návod k obsluze . . . . . . . . . . . . . . . . . . . .304
Állóklíma-berendezés
Használati utasítás. . . . . . . . . . . . . . . . . . .326
Parkirni rashladni uređaj
Upute za uporabu . . . . . . . . . . . . . . . . . . .349
Park kliması
Kullanma Kılavuzu . . . . . . . . . . . . . . . . . . . 371
Parkirna klimatska naprava
Navodilo za uporabo . . . . . . . . . . . . . . . .393
Instalaţie de climatizare în
staţionare
Instrucţiuni de operare . . . . . . . . . . . . . . . 415
Стоящ климатик
Инструкция за експлоатация. . . . . . . . . . 440
Seisujahuti
Kasutusjuhend. . . . . . . . . . . . . . . . . . . . . .464
Κλιματιστικό στάθμευσης
Οδηγίες χειρισμού . . . . . . . . . . . . . . . . 486
Autonominis aušintuvas
Naudojimo vadovas . . . . . . . . . . . . . . . . . 512
Kabīnes dzesētājs
Lietošanas rokasgrāmata . . . . . . . . . . . . . 534
ﺕﺑﺎﺛﻟﺍ ءﺍﻭﻬﻟﺍ ﻑﻳﻛﻣ
ﻝﻳﻐﺷﺗﻟﺍ ﻝﻳﻟﺩ556
EN
DE
FR
ES
PT
IT
NL
DA
SV
NO
FI
PL
SK
CS
HU
HR
TR
SL
RO
BG
ET
EL
LT
LV
AR
CLIMATE CONTROL
COOLAIR
© 2023 Dometic Group. The visual appearance of the contents of this manual is pro-
tected by copyright and design law. The underlying technical design and the prod-
ucts contained herein may be protected by design, patent or pending patent. The
trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are
reserved.
RTX1000/2000, SPX1200
3
1
1
3
3
2
2
2
RTX1000/2000, SPX1200TC
SPX1200IC
1
RTX1000/2000, SPX1200
4
7
456 3
1
2
2
3
12
34
56
79
8
RTX1000/2000, SPX1200
5
32
1
4 5 6
7
8
9
10
4
EN
Explanation of symbols RTX1000/2000, SPX1200
6
Original instructions
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure
that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and
agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application
and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all appli-
cable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and
others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and
warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit
documents.dometic.com.
Contents
1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 Using the parking cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
8 Display messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
9 Cleaning and care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
11 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1 Explanation of symbols
!
!
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
EN
RTX1000/2000, SPX1200 Safety instructions
7
A
I
2 Safety instructions
!WARNING! Failure to obey these warnings could result in death
or serious injury
Electrocution hazard
Plug the device to sockets that ensure proper connection especially
when the device needs to be grounded.
Disconnect all power supply lines when working on the parking cooler
(cleaning, maintenance, etc).
Health hazard
Installation and repairs to the parking cooler may only be carried out
by qualified personnel who are familiar with the risks involved and the
relevant regulations. Inadequate repairs may cause serious hazards.
For repair service, please contact the service center in your country
(see back page).
People (including children) whose physical, sensory or mental capac-
ities or whose lack of experience or knowledge prevent them from
using this product safely should not use it without the supervision or
instruction of a responsible person.
Electrical devices are not toys.
Always keep and use the product out of the reach of children.
Children must be supervised to ensure that they do not play with the
product.
•Do not undo the upper cover of the parking cooler in the event of a
fire. Use approved extinguishing agents instead. Do not use water to
extinguish fires.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
EN
Safety instructions RTX1000/2000, SPX1200
8
!CAUTION! Failure to obey these cautions could result in minor or
moderate injury.
Health hazard
Only use the parking cooler for the purpose specified by the manufac-
turer and do not make any alterations or structural changes to the
device.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to avoid a
hazard.
Do not use the parking cooler if it is visibly damaged.
Make sure no combustible objects are stored or installed near the air
outlet. A distance of at least 50 cm must be maintained.
Do not reach into air grilles or ventilation nozzles or insert any foreign
objects in the system.
ANOTICE!
Damage hazard
The freedom of movement of semi-trailers (of the outer edges of the
semi-trailer when turning or jackknifing) and other vehicle attachments
must not be restricted.
The parking cooler is not suitable for use in agricultural or construction
vehicles.
Vehicles with attached parking coolers may only be cleaned in auto-
matic car washes where the top brush can be manually deactivated.
Switch off the parking cooler before using automatic washing equip-
ment (automatic car washes etc.) to clean the vehicle.
•Do not operate the parking cooler if the ambient temperature is
below 0 °C or above 52 °C.
Please inform your vehicle manufacturer if the height entered in your
vehicle documents needs to be altered due to the installation of the
parking cooler.
Do not insert foreign objects into the system.
INOTE
Observe the safety instructions in the installation manual for the
parking cooler.
EN
RTX1000/2000, SPX1200 Target group
9
3 Target group
The information contained is aimed at the user of the parking cooler.
4 Intended use
The parking cooler is used to supply the interior of the driver's cab with cool and
dehumidified air.
The parking cooler is designed for stationary use. It can be used while driving.
The parking cooler is not suitable for use in agricultural or construction vehicles.
The parking cooler is suitable for ambient temperatures of 5 °C to 52 °C.
RTX1000/2000 only: The maximum travel speed permitted is 130 km/h, as noise
or damage could occur depending on the vehicle design or installation position.
I
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
Incorrect installation, assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
NOTE
As the parking cooler uses R134a as refrigerant with a GWP > 150, there
may be national restrictions for installation the parking cooler on certain
vehicles (i.e. the EU MAC directive 2006/40/EC). Check upfront the
national requirements or contact your Dometic representative, if it is
allowed to install the parking cooler on your vehicle.
EN
Technical description RTX1000/2000, SPX1200
10
5 Technical description
The parking cooler can be used for conditioning inside the vehicle. The air in the inte-
rior is guided into the system through the intake grille, cooled, dried and conveyed
back into the interior through the blower nozzles.
In BOOST mode, the parking cooler cools the vehicle interior for not more than
20 min at maximum power and then switches to AUTO mode. When the set
temperature is reached, the parking cooler switches to AUTO mode before the
20 min is reached.
In AUTO mode, the fan and compressor speed are controlled automatically.
In ECO mode the fan and compressor speed are controlled automatically. The
compressor power is limited in ECO mode electronically.
The system is controlled using the control panel or the remote control.
I
The system is fitted with a battery monitor. If the system is operated when the vehicle
ignition is switched off, the system switches off automatically as soon as the supply
voltage falls below a set level.
I
NOTE
The parking cooler can lower the temperature within the vehicle to a
certain level. The temperature depends on the type of vehicle, the
ambient temperature and the cooling capacity of your parking cooler.
For the cooling capacity of your parking cooler, chapter “Technical
data” on page 26.
NOTE
This set level can be changed. For this, please contact the specialized
company that installed the system.
EN
RTX1000/2000, SPX1200 Operation
11
6Operation
6.1 Device elements
The parking cooler has the following device elements:
6.2 Control panel
The system's control panel contains the following operating and display elements:
No. in
fig. 1, page 3 Explanation
1 Blower nozzles
2 Intake grille
3 Control panel
No. in
fig. 2, page 4 Symbol Description
1 Display (see chapter “Display” on page 12)
2 Infrared receiver (for the remote control)
3 Opens the sub-menus for setting or decreases the value
of the selected parameter once a menu has been
opened.
4 Opens the sub-menus for setting or increases the value of
the selected parameter once a menu has been opened.
5 Scrolls through the menu items.
6 Switches the parking cooler:
•On
Off (press button longer than 3 s)
To standby mode (press button briefly)
7 LED Power (blue):
Only lights up when the system is switched on or in
standby.
EN
Operation RTX1000/2000, SPX1200
12
6.3 Remote control
The remote control contains the following operating elements:
6.4 Display
The display has the following indicators:
No. in
fig. 3, page 4 Symbol Description
1Press button briefly: Switches the parking cooler to
standby mode or on again, if it is in standby mode
Press button longer than 3 s: Switches the parking
cooler off
The parking cooler only can be switched on at the control
panel.
2 Increases the timer running time by 10 min.
3 Reduces the set point by 1 °C/2 °F.
4 +Increases the set point by 1 °C/2 °F.
5 Switches the parking cooler to MANUAL mode and
reduces the speed of the fan.
6 +Switches the parking cooler to MANUAL mode and
increases the speed of the fan.
7 Switches the parking cooler to AUTO mode.
8 Switches the parking cooler to ECO mode.
9 Switches the parking cooler to BOOST mode.
No. in
fig. 4, page 5 Description
1 The symbol shows the current menu selected (see chapter “Using
menus” on page 16).
2 Depending on the current menu, shows:
The required temperature
The current fan speed
The remaining running time of the timer
EN
RTX1000/2000, SPX1200 Using the parking cooler
13
I
7 Using the parking cooler
A
I
3 Shows the current fan speed.
4Setting: Lights up when the setting menu has been activated.
5ERROR: Lights up when the supply voltage falls below a set value.
Additionally the display flashes.
6Battery: Displays problems with the supply voltage.
7°C: Lights up when the temperature is shown in °C.
°F: Lights up when the temperature is shown in °F.
8SET: Indicates that the set temperature is being shown.
9MIN: Lights up when the timer has been set.
10 Shows the current mode (see chapter “Menu mode” on page 17)
NOTE
You can find full details of the display messages in the chapter “Display
messages” on page 21.
NOTICE! Damage hazard
The manufacturer assumes no liability for non-observance of this
operating manual, in particular for any consequential damage,
especially consequential damage caused by failure of the parking
cooler.
Do not insert foreign objects into the system.
NOTE
In EX/III and FL vehicles, the parking cooler must be shut off via a battery
master switch in case of emergency.
No. in
fig. 4, page 5 Description
EN
Using the parking cooler RTX1000/2000, SPX1200
14
7.1 Tip for improved use
I
Observe the following instructions to ensure your CoolAir parking cooler is used
efficiently.
It is recommended that you
Park your vehicle in the shade when possible.
Shade your vehicle when possible.
If you do not have a vehicle air conditioning system, air out your vehicle well
before using the parking cooler.
You should always cool down the vehicle interior before a rest period using the
vehicle air conditioning system.
Keep doors and windows closed.
Avoid any heat sources in the vehicle.
Reduce the power consumed by other products to ensure the maximum
possible operating time of the parking cooler.
Select a suitable temperature and operating mode.
Make sure the blower nozzles (fig. 11, page 3) and intake grille (fig. 12,
page 3) are not covered by cloths, paper or other objects.
The best cooling capacity is achieved when the blower nozzles (fig. 11,
page 3) are not directed towards the intake grille (fig. 12, page 3).
Always observe the following
If you would like the parking cooler to match the color of your vehicle, only paint
the upper shell casing of the parking cooler.
Only paint this when it has been removed. Use light colors when possible.
Wash your vehicle regularly, as dirty driver's cabs heat up more quickly.
Make sure that the performance of the parking cooler is not affected by other
sources of heat (e.g. waste heat from cold machines).
NOTE
The CoolAir parking coolers are designed as air conditioners for relaxing
rest periods. They can be used while driving, however they do not
replace the engine-powered vehicle air conditioning system.
EN
RTX1000/2000, SPX1200 Using the parking cooler
15
7.2 Switching on the parking cooler
A
I
With the system switched off, press the button.
The fan starts.
The Power LED (fig. 27, page 4) lights up.
The digital display (fig. 21, page 4) shows the current status of the parking
cooler (see chapter “Display” on page 12).
I
7.3 Switching the parking cooler to standby mode
Press the button briefly to switch the parking cooler to standby mode.
The parking cooler saves the current settings.
The Power LED (fig. 27, page 4) continues to light up.
I
NOTICE! Damage hazard
Never close all of the air nozzles of the parking cooler simultaneously.
The system would ice up inside.
NOTE
The first time the parking cooler is used, there may be a slight smell. This
odor is caused by a design feature and ends after the system has been
running for a short time.
NOTE
Depending on the system status, the system compressor is switched on
with a delay of up to 180 s.
NOTE
When the parking cooler is in BOOST mode and switched to
standby mode, it will start the next time in AUTO mode.
A running timer is set to 0 by switching the parking cooler in standby
mode.
The parking cooler switches off completely after 12 hours in standby
mode to save power.
SPX1200T, SPX1200C only: When the parking cooler is switched
to standby mode via remote control, an automatic pump cycle of 8 s
is started.
EN
Using the parking cooler RTX1000/2000, SPX1200
16
7.4 Switching off the parking cooler
Press the button for at least 3 s to switch off parking cooler.
The parking cooler saves the current settings.
The Power LED (fig. 27, page 4) goes out.
I
7.5 Using menus
You can set the parking cooler to suit your requirements using the menus:
1. Press the button to browse through the menus.
2. Press the or button to navigate to the appropriate sub-menu or to
change the selected value.
3. Press the button to reduce the selected value.
4. Press the button to increase the selected value.
I
NOTE
When the parking cooler is in BOOST mode and switched off, it will
start the next time in AUTO mode.
A running timer is set to 0 by switching off the parking cooler.
If the parking cooler is switched off while the compressor is still
operating, the fan will continue to run for 20 s to dry the evaporator,
among other things.
SPX1200T, SPX1200C only: When the parking cooler is switched
off, an automatic pump cycle of 8 s is started.
NOTE
If you don‘t press any button for more than 5 s, the display switches back
to the menu mode.
EN
RTX1000/2000, SPX1200 Using the parking cooler
17
You can select the following menus:
Menu mode
In menu mode, you can select the following sub-menus:
Menu Description Change in
value
Setting the temperature (17 °C to 30 °C/62 °F to 86 °F) 1 °C/2 °F
Setting the mode (see chapter “Menu mode” on page 17)
MANUAL mode:
Set the fan speed manually (level 1 – 5)
1
Set the running time of the timer
RTX1000 24 V/RTX2000 24 V, SPX1200TC,
SPX1200IC: 10 – 120 min
RTX1000 12 V/RTX2000 12 V: 10 – 600 min
10 min
Sub-menu Purpose
AUTO AUTO mode:
The fan and the compressor are controlled automatically.
ECO Energy-saving mode:
The fan and the compressor are controlled automatically. The speed of the
compressor is limited electronically.
BOOST BOOST mode:
The system runs at once at full-power. The system switches to automatic
mode after 20 min or once the set temperature has been reached.
MANUAL MANUAL mode:
You can set the fan speed manually.
The compressor is controlled automatically.
EN
Using the parking cooler RTX1000/2000, SPX1200
18
7.6 Using the air conditioner
1. Set the required temperature (chapter “Setting the temperature” on page 18).
2. Set the required mode (chapter “Setting the mode” on page 18).
I
3. Set the timer (chapter “Setting the timer” on page 19), if you want the parking
cooler to switch off automatically after the required time.
7.7 Setting the temperature
I
Control panel
1. Press the button until the symbol is displayed.
2. Press the or button to set the desired temperature.
3. Press the button to save the value.
Remote control
1. Press the + button to increase the temperature.
2. Press the button to decrease the temperature.
3. To save the value don‘t press any button for more than 5 s.
7.8 Setting the mode
Control panel
1. Press the button until the symbol is displayed.
2. Press the or button to set the AUTO, ECO or BOOST mode.
3. To set the MANUAL mode see below.
4. Press the button to start the selected mode.
NOTE
If the required temperature is not reached in the energy-saving mode or
at a low fan speed, increase the fan speed or switch to BOOST mode or
to AUTO mode.
NOTE
Depending on the set unit for the temperature, the temperature is
changed in steps of either 1 °C or 2 °F.
EN
RTX1000/2000, SPX1200 Using the parking cooler
19
If you like to set the fan speed manually (MANUAL mode):
1. Press the button until the symbol is displayed.
2. Press the or button to set the desired fan speed. At the same time the
MANUAL mode is started.
3. Press the button to save the value.
If you want to leave the MANUAL mode:
1. Press the button until the symbol is displayed.
2. Press the button to leave the MANUAL mode.
The BOOST mode is started.
3. Press the button
one more time to set the ECO mode
two more times to set the AUTO mode
Remote control
1. Press the button to set the AUTO mode.
2. Press the button to set the ECO mode.
3. Press the button to set the BOOST mode.
4. Press the + button to increase the fan speed manually and to start the
MANUAL mode.
5. Press the button to decrease the fan speed manually and to start the
MANUAL mode.
6. To to start the selected mode don‘t press any button for more than 5 s.
7.9 Setting the timer
The parking cooler is fitted with a timer. Once the set time has elapsed in the timer,
the parking cooler automatically switches off.
If the timer is activated, the display alternates between the set temperature and the
duration.
EN
Using the parking cooler RTX1000/2000, SPX1200
20
Control panel
1. Press the button until the symbol appears.
2. Press the or button to set the required running time of the timer in
10 minute intervals.
3. Press the button to save the value.
Remote control
1. Press the button to increase the required running time of the timer in 10 min
intervals.
RTX1000 24 V/RTX2000 24 V, SPX1200TC, SPX1200IC: The maximum
running time is 120 min.
RTX1000 12 V/RTX2000 12 V: The maximum running time is 600 min.
2. To save the value don‘t press any button for more than 5 s.
To reset the timer to 0 min, proceed as follows:
1. RTX1000 24 V/RTX2000 24 V, SPX1200TC, SPX1200IC: Press the
button until the timer shows 120 min.
1. RTX1000 12 V/RTX2000 12 V: Press the button until the timer shows
600 min.
2. Press the button again.
3. To save the value don’t press any button for more than 5 s.
7.10 Draining the condensate (SPX1200T, SPX1200C only)
The condensation water which accumulates due to the way the system works is auto-
matically extracted at intervals during operation. You can pump out the condensa-
tion water manually when necessary.
I
1. Press the button on the control unit briefly to switch the parking cooler into
standby.
2. Press and hold the button and the button for more than 3 s.
NOTE
Before winter, extract the condensation water from the system to avoid
damage caused by freezing water.
/