Foscam FI9928P Používateľská príručka

Typ
Používateľská príručka
FI9928P
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 15
Čeština
16 28
Slovenčina
29 41
Magyar
42 54
Deutsch
55 68
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
4
Setting Up Your Foscam Security Camera
Getting Started
Package Contents
IP Camera
Power Adapter
Quick Setup Guide
Wi-Fi Antenna
Security Tips
Please change the camera’s password regularly, using a combination of numbers,
letters and special characters.
We recommend that you regularly update your camera with the latest available
software and firmware to ensure the best experience with your camera.
Physical Description
Antenna
LENS
Infrared LED
Audio In/Out
Power
Alarm In/Out
5
Warning:
The cords on this product are a potential strangulation hazard. For child safety, please
keep these cords out of reach of children.
Setting up Your Camera: Wired Connection via the Foscam App
(Recommended)
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
To ensure a smoother video experience on your smart phone, it is recommended that
your smart phone meet the following specifications:
iOS: version 8.1 or higher.
Android 4.1 or higher, using a device with a Graphics Processing Unit (GPU).
Note: For the best experience, please update the APP tot the latest version!
SD Card
Reset Button and the Indicator
6
Wired Connection
1. Please tighten the antenna clockwise and make sure it is in a vertical position.
2. Connect the camera to your router with an Ethernet cable.
3. Plug the power adapter into the camera, and then wait for about 1 minute.
4. Make sure your smart phone is connected to the same WiFi network as the
camera.
Tighten clocwise
Router
7
Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band-most
newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:
XXXXX_2.4G.
5. Open the foscam APP and please register a Foscam account, or sign in if you have
one already.
6. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the
upper right corner, then select “Scan the QR code” and scan the QR code that
labeled at the bottom of your camera.
7. There are two options in the following steps, please pay attention to choose the
corresponding adding method.
7.1 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”
interface, then select your WiFi network and enter your WiFi’s password. After, you can
set the camera name and tap “Save” in “Set name” interface.
Tap + icon
Select „Scan the
code“
Scan the QR code which is
located at the bottom of your
camera.
8
Note: It is strongly recommended that you choose to configure WiFi at this step.
7.2 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”
interface, then you tap “Skip” in the “WiFi Settings” interface. After, you can set the
camera name and tap “Save” in “Set Name” interface.
Configure WiFi
Select your WiFi Network
and enter your WiFi’s
password
Camera added
successfully and name
hase been set.
Configure WiFi
Tap „Skip“
Camera added successfully and
name has been set.
9
Note: If the adding process fails, please reset your camera and try adding again
according to the above method.
8. Tapping on the play button in the video box will jump to the “Camera Login”
setting interface. For security, please set a new username and password for your
camera before viewing live video.
9. After completing the above steps, you can begin using your camera.
Note: If you choose installation step 7.2, please refer to the following steps for
configuring WiFi. After setting your WiFi, you can unplug your network cable and the
camera works normally.
Reset Button
Tap
Set a new username and
password.
10
Configure WiFi
If you selected “Skip” in step 7, click play to enter the camera credential interface > Tap
the “ ” button > tap “WiFi Setting” > select your WiFi network and enter your WiFi’s
password. After setting up successfully, you can view live video without the Ethernal
cable.
¨
Other Ways to Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with
Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same
time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.
You can download the “Foscam VMS” Windows version from foscam.com/vms, and can
download the “Foscam VMS” Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your
camera.
Please visit foscam.com/downloads to view the user manual and for additional detailed
steps.
Tap
button
Select „WiFi Settings“
Select your WiFi Network
and enter your WiFi’s
password
11
Foscam Cloud Service
You can access the camera via the Foscam Cloud website: https://www.myfoscam.com
Some of the benefits of viewing your camera in the cloud:
It’s simple and convenient to remotely access and manage all your WiFi security
cameras.
Enjoy the latest features first through Foscam Cloud including cloud storage and
more.
Getting started is fast if you have already registered and account through
Foscam App, you can directly use your login credential for Foscam Cloud.
Hardware Installation
Fixate the camera on your preferred location and use the provided screws to mount it.
Please Note:
Ensure that rain or water will not reach the connector ports at the end of the pig tail
wiring. These connectors are not weather-resistant.
12
Important Notice
Camera Username & Password
The camera username & password are used to access and manage your camera. Having
a strong password can significantly improve the security of your camera.
If you have forgotten either of them, please press the “Reset” button and hold it for
more than 10 seconds while the camera is powered on. After release the button. The
camera will automatically reboot and the default settings will be restored. The default
username / password will then become admin / (blank), respectively.
You can then reconnect the camera by following this Quick Setup Guide.
Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the
Foscam App and the Foscam Cloud service website. Therefore, you can register your
account username & password on either one.
Storage Media
Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only
supports FAT-32 format) storage formats. If you wish to record and play back large
amounts of video, we recommended using a Foscam NVR device as well.
Firmware Upgrade
You can upgrade the firmware of your camera with the Foscam App by using the new
“One-Key Online Upgrade” feature (Open the Foscam App and Login to the camera,
select Settings > Firmware Upgrade).
You can also download the latest version to upgrade your camera from our official
website foscam.com/upgrades.
Safety Tips
Please ensure that the proper power supply is used before using the camera.
Pleas install the camera securely using the screws provided.
Please use this product within the temperature range. When the ambient
temperature is too high or too low, it may cause product failure.
To avid risk of fire or electric shock, please keep your camera connectors in a
cool, dry place.
Please keep the camera out of reach of small children.
This product is not a toy, children should use the product under adult
supervision.
Change your default port to a greater range to help ensure the safety of your
connection. How to change the default port: please visit foscam.com/download
to view the user manual.
Check the logs of your Foscam camera frequently. Foscam Cameras have
embedded logs remiding telling your which IP addresses are accessing the
camera.
13
Product Performance
WLAN frequency range:
2412MHz 2472MHz
Maximum transmission power:
< 18.5dBm
Wireless Standard:
IEEE802.11b/g/n (2.4GHz)
Power Supply
DC 12V 2.0A 24W
Technical Support
If you have problem with your Foscam device, please contact the reseller you purchased
from, or you can e-mail the headquarter company headquarters technical support team:
support@foscam.com
Your valuable comments and suggestions on improving Foscam Products are welcomed!
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as
batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
14
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: IP Camera
Model / Type: FI9928P
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
15
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.
16
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod pro budoucí použití. Zvláštní
pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli dotazy nebo
připomínky, obraťte se na zákaznickou linku.
www.alza.cz/kontakt
+420 225 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
17
Nastavení bezpečnostní kamery Foscam
Začínáme
Obsah balení
IP kamera
Napájecí adaptér
Stručný průvodce nastavením
Anténa Wi-Fi
Bezpečnostní tipy
Heslo fotoaparátu pravidelně měňte a používejte kombinaci čísel, písmen a
speciálních znaků.
Doporučujeme pravidelně aktualizovat fotoaparát pomocí nejnovějšího
dostupného softwaru a firmwaru, abyste si zajistili nejlepší zkušenosti s
fotoaparátem.
Popis
Anténa
OBJEKTIVY
Infračervená LED
dioda
Audio
vstup/výstup
Napájení
Vstup/výstup
alarmu
18
Varování:
Šňůry tohoto výrobku představují potenciální nebezpečí uškrcení. Z důvodu bezpečnosti
dětí uchovávejte tyto šňůry mimo dosah dětí.
Nastavení fotoaparátu: Připojení kabelem prostřednictvím
aplikace Foscam (doporučeno)
Než začnete
Naskenujte níže uvedený QR kód pro stažení a instalaci aplikace Foscam APP.
Pro zajištění plynulejšího sledování videa na chytrém telefonu doporučujeme, aby váš
chytrý telefon splňoval následující specifikace:
iOS: verze 8.1 nebo vyšší.
Android 4.1 nebo novější a používejte zařízení s grafickým procesorem (GPU).
Poznámka: Pro co nejlepší zážitek aktualizujte APP na nejnovější verzi!
Karta SD
Tlačítko resetování a indikátor
19
Kabelové připojení
1. Utáhněte anténu ve směru hodinových ručiček a ujistěte se, že je ve svislé poloze.
2. Připojte kameru ke směrovači pomocí ethernetového kabelu.
3. Připojte napájecí adaptér k fotoaparátu a počkejte asi 1 minutu.
4. Ujistěte se, že je váš chytrý telefon připojen ke stejné síti Wi-Fi jako fotoaparát.
Utahování ve
směru
hodinových
ručiček
Směrovač
20
Tipy: Většina novějších routerů má 2,4GHz i 5GHz kanály. Vyberte například SSID:
XXXXX_2.4G.
5. Otevřete aplikaci foscam APP a zaregistrujte si účet Foscam nebo se přihlaste,
pokud již účet máte.
6. Po přihlášení do aplikace Foscam APP vyberte možnost "Klepnutím přidat
kameru" nebo ikonu "+" v pravém horním rohu, poté vyberte možnost
"Naskenovat QR kód" a naskenujte QR kód, který je označen na spodní straně
kamery.
7. V následujících krocích jsou dvě možnosti, věnujte pozornost výběru
odpovídajícího způsobu přidání.
7.1 Počkejte několik sekund, v rozhraní "Configure WiFi" (Konfigurace WiFi) můžete
klepnout na "Configure WiFi" (Konfigurovat WiFi), poté vyberte síť WiFi a zadejte heslo
WiFi. Poté můžete nastavit název kamery a klepnout na "Save" (Uložit) v rozhraní "Set
name" (Nastavit název).
Klepněte na
ikonu +
Vyberte
možnost
"Naskenovat
kód"
Naskenujte kód QR, který se
nachází na spodní straně
fotoaparátu.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Foscam FI9928P Používateľská príručka

Typ
Používateľská príručka

V iných jazykoch