Foscam Indoor QHD IP Security Camera Používateľská príručka

FOSCAM-Indoor QHD IP

Security Camera

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

2

English

3 – 15

Čeština

16 – 29

Slovenčina

30 – 42

Magyar

43 – 56

Deutsch

57 – 70

3

The product user guide contains product features, how to use, and the operating

procedure. Read the user manual carefully to get the best experience and avoid

unnecessary damage. Keep this manual for future reference. If you have any questions

or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4

Setting up Your Foscam Security Camera

Getting Started

Package Contents

Security Tips

• Please change the camera’s password regularly, using a combination of numbers,

letters, and special characters.

• We recommend that you regularly update your camera with the latest available

software and firmware to ensure the best experience with your camera.

IP Camera

Mounting Plate

USB Power Cable

AC Adapter

Quick Setup Guide

5

Physical Description

Warning:

The cords on this product are a potential strangulation hazard. For child safety, please

keep these cords out of the reach of children.

Status light

Lens

Micro SD Card Slot

Magnetic Bracket

One-button call / Reset

Speaker

Power

Microphone

6

Setting Up Your Camera: Connection via the Foscam App

(Recommended)

Before You Get Started

Scan the QR code below to download and install the Foscam APP.

To ensure a smoother video experience on your smart phone, it is recommended that

your smart phone meet the following specifications:

• iOS: version 11 pr higher

• Android: 4.1 or higher, using device with a Graphics Processing Unit (GPU)

Note: For the best experience, please update the APP to the latest version!

WiFi connection

1. Plug the power adapter into the camera, and please wait for a few seconds until

hearing the “Ready for WiFi configuration”.

Tips: If you didn’t hear the voice prompt, press and hold reset for about 10 seconds to

reset the camera.

Reset

7

2. Make sure that your smart phone is connected to your WiFi router.

Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can

choose the channel with the stronger signal to use. For example, choose your SSID:

XXXXX_2.4G or XXXXX_5G.

3. Open the foscam APP and please sign up for a Foscam account, or sign in if you

have one already.

4. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the

upper right corner, then select “Scan the QR code” and scan the QR code that

labelled at the bottom of your camera.

Tap + icon

Select “Scan the QR code“

Scan the QR code,

located at the bottom

of your camera

8

5. In “WiFi connection”, select “Ready” and enter your WiFi’s password and tap

“Confirm”, afterwards tap the “Configure WiFi connection” button.

6. Please scan the QR code on the phone screen with camera, then you will hear a

voice prompt say “WiFi connecting”. Select the checkbox and tap “Next”.

Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in)

away, and if you encounter difficulties you can try to move the screen slowly around

10 – 15cm (3.94 – 5.9in).

7. Wait a few second until the camera notifies you that the “Wireless connection

seceded”, which means your camera has connected to your WiFi successfully.

After, you can set the camera name and tap “Save” in “Set name” interface.

Select “WiFi connection“

Enter your WiFi’s password

and tap “Confirm“

Place the QR code directly in front

of the camera

Tick the checkbox

and tap “Next“

9

Note: If the process of adding a camera fails, please reset your camera and try adding

again according to the above method.

8. Tapping on the play button within the video box will jump to the “Camera Login”

setting interface. For your security, please set a new username and password for

your camera before viewing live video.

9. After completing the above steps, you can begin to use the camera.

Camera added succesfully and

the name has been set

Tap “ “

Set a new username and password

10

Hardware Installation

• Place the camera directly on a desk.

• Adsorbing on a ferromagnetic object using a magnet on the base. (Base built-in

magnet).

• Install the mounting plate on a wall or ceiling with the supplied fixing screws.

Note: Align points a and b to insert the camera base to the mounting plate. Rotate

so that points a and b are aligned, which attaches the camera securely to the base.

Ferromagnetic object

Built-in magnet

11

Other Ways to Access Your Camera

Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with

Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same

time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.

You can download the “Foscam VMS” Windows version form forcam.com/vms, and

download “Foscam VMS” Mac version form the APP store:

http://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12

Note: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera

• Run Foscam VMS, the create a local administration account and login.

• Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your

camera.

Please visit for foscam.com/downloads to view the user manual and for additional

detailed steps.

12

Important Notice

Camera Username & Password

The camera username & password are used to access and manage your camera. Having

a strong password can significantly improve the security of your camera.

If you have forgotten either of them, please press the "Reset" button and hold it for

more than 10 seconds while the camera is powered on. After hearing the voice prompt,

release the button. The camera will automatically reboot and the default settings will be

restored. You can then reconnect the camera by following this Quick Setup Guide.

Storage Media

Your camera supports cloud, NVR (Network Video Recorded), and Micro SD card

(supports exFAT and FAT32 format) storage formats. If you wish to record and play back

large amounts of video, we recommend using a Foscam NVR device as well.

Firmware Upgrades

You can upgrade the firmware of your camera with the Foscam App by using the new

“One-Key-Online Upgrade” feature (Open the Foscam App and Login to the camera,

select “Settings” >Firmware> “Firmware Upgrade”).

You also can download the latest version to upgrade your camera from our official

website foscam.com/upgrades.

Safety Tips

• Please ensure that tat the proper power supply is used before using the camera.

• Please install the camera and bracket securely using the screws provided.

• Please use this product within the temperature range. When the product ambient

temperature is too high or too low, it may cause product failure.

• To avoid the risk of fire or electric shock, please keep your camera in a cool, dry

place.

• Please keep the camera out of reach of small children.

• This product is not a toy, children should use the product under adult

supervision.

• Change your default port to a greater range to help ensure the safety of your

connection. How to change the default port: please visit foscam.com/downloads

to view the user manual.

• Check the logs of your Foscam cameras frequently. Foscam Cameras have

embedded logs telling you which IP addresses are accessing the camera.

13

Product Performance

WLAN frequency range:

2412MHz-2472MHz and 5725MHz-

5845MHz

Maximum transmission power:

< 18.5dBm

Wireless Standard:

IEEE802.11b/g/n (2.4GHz

IEEE802.11a/n/ac (5GHz)

Power Supply:

DC 5V 1.0A 5W

Technical Support

If you have problems with your Foscam device, please contact the reseller you

purchased from, or you can e-mail the company headquarters technical support team:

support@foscam.com.

Your valuable comments and suggestions on improving Foscam products are welcomed!

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation and service of the

product.

• Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g. during transport, cleaning

by inappropriate means, etc.).

• Natural wear and aging of consumables or components during use (such as

batteries, etc.).

• Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

• If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

14

EU Declaration of Conformity

Identification data of the manufacturer's / importer's authorized representative:

Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7

CIN: 27082440

Subject of the declaration:

Title: Foscam Security Camera

Model / Type: Indoor QHD IP Security Camera

The above product has been tested in accordance with the standard(s) used to

demonstrate compliance with the essential requirements laid down in the

Directive(s):

Directive No. (EU) 2014/53/EU

Directive No. (EU) 2011/65/EU vč. změn 2015/863/EU

Prague, 28.9.2021

15

WEEE

This product must not be disposed of as normal household waste in accordance with

the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).

Instead, it shall be returned to the place of purchase or handed over to a public

collection point for the recyclable waste. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. Contact your local authority or the nearest collection point for further

details. Improper disposal of this type of waste may result in fines in accordance with

national regulations.

16

Uživatelská příručka k výrobku obsahuje funkce výrobku, návod k použití a postup

obsluhy. Přečtěte si pozorně uživatelskou příručku, abyste získali co nejlepší zkušenosti a

předešli zbytečným škodám. Tuto příručku si uschovejte pro budoucí použití. Máte-li

jakékoli dotazy nebo připomínky k zařízení, obraťte se na zákaznickou linku.

✉ www.alza.cz/kontakt

✆ +420 225 340 111

Dovozce Alza.cz a.s. , Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

17

Nastavení bezpečnostní kamery Foscam

Začínáme

Obsah balení

Bezpečnostní tipy

• Heslo kamery pravidelně měňte a používejte kombinaci čísel, písmen a

speciálních znaků.

• Doporučujeme pravidelně aktualizovat kameru pomocí nejnovějšího dostupného

softwaru a firmwaru, abyste si zajistili nejlepší provoz.

IP kamera

Montážní deska

Napájecí kabel USB

Síťový adaptér

Uživatelský manuál

nastavením

18

Popis kamery

Varování:

Šňůry tohoto výrobku představují potenciální nebezpečí uškrcení. Z důvodu bezpečnosti

dětí je prosím uchovávejte mimo jejich dosah.

Stavová

kontrolka

Objektiv

Slot pro kartu

Micro SD

Magnetický držák

Volání/ resetování

jedním tlačítkem

Reproduktor

Napájení

Mikrofon

19

Nastavení kamery: Připojení prostřednictvím aplikace

Foscam (doporučeno)

Než začnete

Naskenujte níže uvedený QR kód pro stažení a instalaci aplikace Foscam APP.

Pro zajištění plynulejšího sledování videa na chytrém telefonu doporučujeme, aby váš

chytrý telefon splňoval následující specifikace:

• iOS: verze 11 pr vyšší

• Android: 4.1 nebo vyšší, zařízení s grafickým procesorem (GPU)

Poznámka: Pro co nejlepší zážitek aktualizujte APP na nejnovější verzi!

Připojení WiFi

1. Zapojte napájecí adaptér do kamery a počkejte několik sekund, než uslyšíte

hlášení "Ready for WiFi configuration". (Připraveno pro konfiguraci WiFi)

Tipy: Pokud jste neslyšeli hlasovou výzvu, stiskněte a podržte tlačítko reset po dobu asi

10 sekund, abyste kameru resetovali.

Reset

20

2. Ujistěte se, že je váš chytrý telefon připojen ke směrovači Wi-Fi.

Tipy: Kamera podporuje dvoupásmové sítě WiFi 2,4 GHz a 5 GHz, takže si můžete vybrat

kanál se silnějším signálem. Zvolte například SSID: XXXXX_2.4G nebo XXXXX_5G.

3. Otevřete aplikaci foscam APP a zaregistrujte si účet Foscam nebo se přihlaste,

pokud již účet máte.

4. Po přihlášení do aplikace Foscam APP vyberte možnost " Tap to add a camera"

(Klepnutím přidat kameru) nebo ikonu "+" v pravém horním rohu, poté vyberte

možnost "Scan the QR code" (Naskenovat QR kód) a naskenujte QR kód, který je

označen na spodní straně kamery.

Klepněte na

ikonu +

Vyberte možnost

"Naskenovat kód QR"

Naskenujte kód QR,

který se nachází na

spodní straně kamery.

Stránka sa načítava ...

Foscam Indoor QHD IP Security Camera Používateľská príručka

Foscam Indoor QHD IP Security Camera Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty