Dometic DC-Kit5 Návod na používanie

DC-Kit5

DC Extension Kit

Installation and Operating Manual. . . . . . . . 9

DC-Erweiterungskit

Montage- und Bedienungsanleitung . . . . .26

Kit d'extension CC

Instructions de montage

et de service . . . . . . . . . . . . . . . . . . . . . . . . .46

Set de ampliación para CC

Instrucciones de montaje y de uso . . . . . . .64

Kit de expansão DC

Instruções de montagem e manual de

instruções . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Kit di ampliamento per CC

Istruzioni di montaggio e d’uso . . . . . . . .100

DC-uitbreidingskit

Montagehandleiding en

gebruiksaanwijzing . . . . . . . . . . . . . . . . . . 118

DC-udvidelsessæt

Monterings- og betjeningsvejledning . . .136

DC-utbyggnadssats

Monterings- och bruksanvisning . . . . . . . 154

DC-utvidelsessett

Monterings- og bruksanvisning . . . . . . . . 170

DC-laajennussetti

Asennus- ja käyttöohje . . . . . . . . . . . . . . . 186

Комплект расширения для

постоянного тока

Инструкция по монтажу и эксплуатации 202

Zestaw uzupełniający DC

Instrukcja montażu i obsługi. . . . . . . . . . . 220

Rozširujúca súprava DC

Návod na montáž a uvedenie

do prevádzky. . . . . . . . . . . . . . . . . . . . . . . 239

Rozšiřující sada DC

Návod k montáži a obsluze . . . . . . . . . . . 257

Egyenáramú bővítőkészlet

Szerelési és használati útmutató . . . . . . . 274

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

AIR CONDITIONERS

ACCESSORIES

DC-Kit5--IO-16s.book Seite 1 Dienstag, 21. März 2017 2:32 14

DC-Kit5--IO-16s.book Seite 2 Dienstag, 21. März 2017 2:32 14

DC-Kit5

3

CA1000

1

2

DC-Kit5--IO-16s.book Seite 3 Dienstag, 21. März 2017 2:32 14

DC-Kit5

4

I5I2I1 I4I3

3

CA2500

4

AB

5

DC-Kit5--IO-16s.book Seite 4 Dienstag, 21. März 2017 2:32 14

DC-Kit5

5

B2200

6

7

DC-Kit5--IO-16s.book Seite 5 Dienstag, 21. März 2017 2:32 14

DC-Kit5

6

FreshJet

8

9

DC-Kit5--IO-16s.book Seite 6 Dienstag, 21. März 2017 2:32 14

DC-Kit5

7

FreshLight

A

B

C

0

DC-Kit5--IO-16s.book Seite 7 Dienstag, 21. März 2017 2:32 14

DC-Kit5

8

a

DC-KitIR LIN1 12 VLIN2

POWER

b

1

c

DC-Kit5--IO-16s.book Seite 8 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5

9

Please read this instruction manual carefully before installation and first

use, and store it in a safe place. If you pass on the product to another

person, hand over this instruction manual along with it.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

4 Target group for this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7 Installing and connecting the DC kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

8 Using the DC kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

9 Maintaining and cleaning the DC kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

10 Rectifying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

11 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

12 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

13 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DC-Kit5--IO-16s.book Seite 9 Dienstag, 21. März 2017 2:32 14

EN

Explanation of symbols DC-Kit5

10

1 Explanation of symbols

D

!

A

I

2 General safety instructions

The manufacturer accepts no liability for damage in the following cases:

• Faulty assembly or connection

• Damage to the product resulting from mechanical influences and excess voltage

• Alterations to the product without express permission from the manufacturer

• Use for purposes other than those described in the operating manual

2.1 General safety

!

WARNING!

• Observe the safety instructions in the installation and operating

manual for the components supplied and your Dometic air condi-

tioner.

• Use the device only as intended.

• People whose physical sensory or mental capacities prevent them

from using this device safely should not operate it without the super-

vision of a responsible adult.

• Electrical devices are not toys!

Always keep and use the device out of the reach of children.

DANGER!

Safety instruction: Failure to observe this instruction will cause fatal or

serious injury.

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

NOTE

Supplementary information for operating the product.

DC-Kit5--IO-16s.book Seite 10 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5 General safety instructions

11

• Children must be supervised to ensure that they do not play with the

device.

• Maintenance and repair work may only be carried out by qualified

personnel who are familiar with the risks involved and the relevant

regulations.

2.2 Safety when installing and repairing

!

WARNING!

• Installing and repairing the device may only be performed by qualified

personnel who are familiar with the risks as well as the guidelines and

safety precautions to be applied.

2.3 Safe operation

!

• Only operate the system if you are certain that all the housings and

cables are not damaged.

• The 24 V connection cables are designed for high levels of current. Do

not make any changes to the cable. If necessary, get a specialist to do

this for you.

• Make sure the air inlets and outlets of the device are not covered.

• Ensure good ventilation. The inverter produces dissipated heat which

has to be diverted.

• Always disconnect the power supply when working on the device.

WARNING!

Note the following basic safety information when using electrical

devices to protect against:

• Electric shock

• Fire hazards

• Injury

DC-Kit5--IO-16s.book Seite 11 Dienstag, 21. März 2017 2:32 14

EN

Scope of delivery DC-Kit5

12

3Scope of delivery

Before starting the system, check that all the parts belonging to the scope of delivery

are present and fitted.

4 Target group for this manual

The installation information in this manual is only intended for qualified personnel at

workshops, who are familiar with the guidelines and safety precautions to be applied

during the installation of vehicle accessory parts.

All other chapters are intended for the users.

Quantity Description Ref. number

1 Charging current distributor ECL-103 9600000548

1 Inverter MSI1824T with priority circuit 9600000011

1 Remote control for the inverter MCR-9 (including

connection cable)

9600000091

1 2-wire control cable for MCR-9

(CA2500, B1600, HB2500)

4441300124

1 2-wire control cable for B2200/B1600 Plus 4441300129

1 Sensing cable for CA1000 4441300084

1 Connection cable

Black supply line (35 mm², 1.5 m long)

Red supply line (35 mm², 1.5 m long)

4441300120

4441300119

1 Sensing cable for FreshJet/FreshLight/FreshWell 4441300221

1 Installation and operating manual 4445101956

DC-Kit5--IO-16s.book Seite 12 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5 Intended use

13

5 Intended use

The DC-Kit5 extension kit (ref. no. 9100300073) is suitable for equipping the

following Dometic roof air conditioners for 24 Vg driving:

• CA1000, CA2500

• B1600, B2200, B1600 Plus, HB2500

• FJ1100, FJ1700, FJ2200

• FL1600, FL2200

• FW3000

The MSI1824T inverter is only designed for the cooling device in the roof air

conditioner not for the heating mode, as the heating elements take more power

than the inverter is able to generate in continuous operation.

I

6 Technical description

The DC-Kit5 extension kit enables Dometic roof air conditioners to be used in

vehicles with 24 Vg. The extension kit consists of the following components:

• The ECL-103 charging current distributor with low voltage protection regulates

the power distribution between the starter battery, supply battery and light-

machine. This prevents the battery and the electronics in the vehicle from over-

loading.

• The MSI1824T inverter supplies the roof air conditioner with the required input

voltage of 230 Vw. The inverter generates the 230 V input voltage from the 24 V

on-board electricity supply in the vehicle.

The integrated priority circuit can be used for distributing the voltage in the

vehicle with two available power sources. If a mains voltage and voltage created

by the inverter (vehicle battery) are both connected to the device, the use of the

mains voltage has priority. If the only voltage available is that generated by the

inverter, the power supply from the battery is used. This ensures that the limited

power of the battery is not used unnecessarily.

• The MCR-9 remote control can switch the inverter on and off.

NOTE

The functions described in this manual for the B2200 Dometic roof air

conditioner apply to roof air conditioners with a serial number higher

than 802200001.

For B2200 Dometic roof air conditioners with a lower serial number, the

information for the B1600 Dometic roof air conditioner applies.

DC-Kit5--IO-16s.book Seite 13 Dienstag, 21. März 2017 2:32 14

EN

Installing and connecting the DC kit DC-Kit5

14

7 Installing and connecting the DC kit

A

Note the following safety instructions during installation:

A

NOTICE!

The DC kit may only be installed by a qualified workshop.

The following information is intended for specialists who are familiar with

the guidelines and safety precautions to be applied.

NOTICE!

Observe the information in the installation and operating manuals when

installing the components supplied

• MSI1824T inverter

• MCR-9 remote control

• ECL-103 charging current distributor

and for your Dometic roof air conditioner

• CA1000, CA2500

• B1600, B1600 Plus, B2200

• HB2500

• FJ1100, FJ1700, FJ2200

• FL1600, FL2200

• FW3000

NOTICE!

• Note the location of wiring harnesses, wiring and other components

within the installation area.

• Install the DC kit using the following instructions. Improper

installation of the DC kit can put the safety of the user at risk and

lead to irreparable damage to the DC kit or other devices.

• Disconnect all power supply lines to the individual components and

the roof air conditioner.

DC-Kit5--IO-16s.book Seite 14 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5 Installing and connecting the DC kit

15

Observe the following safety instructions for the electrical connections:

A

Observe the following instructions when selecting the location for installing the

components:

• Make sure the cables are of the correct length.

• Choose a well-ventilated installation location near the supply battery.

7.1 Preparing the installation

➤ Disconnect the following voltage supplies in the vehicle:

– Positive battery terminal

– External voltage supply

7.2 Installing components

➤ Install the ECL-103 charging current distributor.

➤ Install the MSI1824T inverter.

➤ Install the MCR-9 remote control.

D

NOTICE! Risk of short circuit!

• First, disconnect the 230 V external power supply to the caravan.

• Disconnect the earth connection to the supply battery.

• Disconnect the connection to the starter battery.

• If you have to feed cables through metal walls or other walls with

sharp edges, use ducts or tubes to prevent damage.

• Do not lay cables which are loose or bent next to electrically

conductive material (metal).

• Fasten the cables securely.

• Ensure the 24 V cables are especially well-protected.

• Check whether you need to fit any additional fuses.

• Do not pull on the cables.

• Do not lay the 230 V mains cable and the 12/24 V DC cable in the

same duct.

• Lay the cables so that they cannot be tripped over or damaged.

DANGER! Electrocution!

Only connect the battery once you have the completed all the

installation work and you are certain it has been done properly.

DC-Kit5--IO-16s.book Seite 15 Dienstag, 21. März 2017 2:32 14

EN

Installing and connecting the DC kit DC-Kit5

16

7.3 Connecting the CA1000 Dometic roof air conditioner

➤ Remove the air outlet of the roof air conditioner ( CA1000) (fig. 1, page 3).

➤ Insert the on/off cable for CA1000 into the socket on the control board of the

roof air conditioner (fig. 2 1, page 3).

➤ Lay the on/off cable of the roof air conditioner to the ECL-103 charging current

distributor.

➤ Connect the on/off cable with connections I2 and I3 of the charging current-

distributor ( ECL-103) (fig. 3 1 and 2, page 4).

➤ Attach the air outlet of the roof air conditioner ( CA1000) (fig. 1, page 3).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

7.4 Connecting the CA2500 Dometic roof air conditioner

➤ Remove the air outlet of the roof air conditioner ( CA2500) (fig. 4, page 4).

➤ Cut the cable loop of the CA2500 on/off cable through the middle (fig. 5 A,

page 4).

➤ Connect the control cable to the on/off cable (fig. 5 B, page 4).

➤ Lay the control cable of the roof air conditioner to the ECL-103 charging current

distributor.

➤ Connect the control cable with connections I2 and I3 of the charging current

distributor ( ECL-103) (fig. 3 1 and 2, page 4).

➤ Attach the air outlet of the roof air conditioner ( CA2500) (fig. 4, page 4).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

DC-Kit5--IO-16s.book Seite 16 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5 Installing and connecting the DC kit

17

7.5 Connecting the B2200/B1600 Plus Dometic roof air

conditioner

I

➤ Remove the outlet panel of the roof air conditioner, if necessary also remove the

upper cover ( B2200/B1600 Plus) (fig. 6, page 5).

➤ Join on/off cable for B2200/B1600 Plus to the plug connector on the circuit

board (fig. 7, page 5).

I

➤ Join the universal connection cable to the on/off cable of the B2200/

B1600Plus.

➤ Connect the universal connection cable with connections I2 and I5 of the

charging current distributor ( ECL-103) (fig. 3, page 4).

➤ Attach the outlet panel of the roof air conditioner ( B2200/B1600 Plus)

(fig. 6, page 5).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

NOTE

Connect roof air conditioners with a serial number lower than

802200001 in the way described in chapter “Connecting the B1600

and HB2500 Dometic roof air conditioner” on page 19.

NOTE

Guide the on/off cable carefully past the fan.

DC-Kit5--IO-16s.book Seite 17 Dienstag, 21. März 2017 2:32 14

EN

Installing and connecting the DC kit DC-Kit5

18

7.6 Connecting the FJ1100, FJ1700, FJ2200 Dometic roof

air conditioner

➤ Remove the outlet panel of the roof air conditioner, if necessary also remove the

upper cover ( FJ1100, FJ1700, FJ2200) (fig. 8, page 6).

➤ Join on/off cable for FJ1100, FJ1700, FJ2200 to the plug connector on the circuit

board (fig. 9, page 6).

I

➤ Join the universal connection cable to the on/off cable of the FJ1100, FJ1700,

FJ2200.

➤ Connect the universal connection cable with connections I2 and I5 of the

charging current distributor ( ECL-103) (fig. 3 1 and 2, page 4).

➤ Attach the outlet panel of the roof air conditioner ( FJ1100, FJ1700, FJ2200)

(fig. 8, page 6).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

7.7 Connecting the FL1600, FL2200 Dometic roof air

conditioner

➤ Remove the outlet panel of the roof air conditioner, if necessary also remove the

upper cover ( FL1600, FL2200) (fig. 0 , page 7).

➤ Join on/off cable for FL1600, FL2200 to the plug connector on the circuit board

(fig. a, page 8).

I

➤ Join the universal connection cable to the on/off cable of the FL1600, FL2200.

➤ Connect the universal connection cable with connections I2 and I5 of the

charging current distributor ( ECL-103) (fig. 3 1 and 2, page 4).

➤ Attach the outlet panel of the roof air conditioner ( FL1600, FL2200) (fig. 0,

page 7).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

NOTE

Guide the on/off cable carefully past the fan.

NOTE

Guide the on/off cable carefully past the fan.

DC-Kit5--IO-16s.book Seite 18 Dienstag, 21. März 2017 2:32 14

EN

DC-Kit5 Installing and connecting the DC kit

19

7.8 Connecting the DometicFW3000 storage

compartment air conditioner

➤ Connect the on/off cable for FW3000 to the connection socket on the

connector panel (fig. b, page 8).

I

➤ Join the universal connection cable to the on/off cable of the FW3000.

➤ Connect the universal connection cable with connections I2 and I5 of the

charging current distributor ( ECL-103) (fig. 3 1 and 2, page 4).

➤ Run the connection cable of remote control MCR-9 to the inverter and connect

( MSI1824T).

7.9 Connecting the B1600 and HB2500 Dometic roof air

conditioner

➤ Connect the D+-output on the light system using a 1,5 mm² cable to connection

I2 of the changing current distributor ( ECL-103) (fig. 3 1, page 4).

➤ Connect the I5-output of the ECL-103 to the control cable connection on the

MCR-9 remote control (fig. c 1, page 8).

NOTE

Guide the on/off cable carefully past the fan.

DC-Kit5--IO-16s.book Seite 19 Dienstag, 21. März 2017 2:32 14

EN

Using the DC kit DC-Kit5

20

7.10 Connecting the DC kit to the power supply

➤ Check that all the connections have been made in accordance with the

instructions.

➤ Check that the roof air conditioner is closed properly.

➤ Connect the electrical connections of the components ( ECL-103).

➤ Connect the 230 V connection on the roof air conditioner with the MSI1824T

inverter plug ( MSI1824T).

➤ Connect the positive battery cables to the batteries.

➤ Check the following are working properly:

– Check the on and off values for the charging voltage regulator

– Check the priority circuit

– Switch on the air conditioning in driving mode ( air conditioning)

– Switch on the air conditioning on mains operation

➤ Only CA1000: adapt the roof air conditioner software to AC/DC operation

( CA1000).

8 Using the DC kit

The DC-Kit5 consists of several components, each with its own installation and

operating manual. Use the installation and operating manuals for the components

and make sure you are familiar with the individual devices.

This chapter contains information on operating the overall system. This operating

manual does not replace any information contained in the installation and operating

instructions for the components.

A

NOTICE!

CA2500, B2200, B1600 Plus, HB2500, FJ1100, FJ1700,

FJ2200, FL1600, FL2200, FW3000: the inverter may be damaged.

Ensure that these models are not used in the automatic air conditioning

mode or heating modes for driving. The inverter is not designed for gen-

erating this amount of power.

DC-Kit5--IO-16s.book Seite 20 Dienstag, 21. März 2017 2:32 14

Stránka sa načítava ...

Dometic DC-Kit5 Návod na používanie

Dometic DC-Kit5 Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty