Fieldmann FZN 4001-A Používateľská príručka

FZN 4001-A

FZN 4002-AT

1

FZN 4001-A / FZN 4002-AT

1

67

32

23

᧨ 㧦

qg

qs

qd

qa

qf

08

45

4

5

8

4

9

English ........................................................................................................................ 1 – 17

Čeština ..................................................................................................................... 18 – 31

Slovenčina ................................................................................................................ 32 – 45

Magyarul ................................................................................................................... 46 – 59

Polski ........................................................................................................................ 60 – 73

Русский .................................................................................................................... 74 – 87

Lietuvių ..................................................................................................................... 88 – 101

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

2

67

3

1

3

89

10 11

qf

qd

12 13

14

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

4

Cordless Grass

Shear & Hedge Trimmer

USER'S MANUAL

Thank you for purchasing this cordless shear for trimming grass edges and shaping

ornamental shrubs. Before you start using it, please, carefully read this user's manual

and save it for possible future use.

CONTENTS

ILLUSTRATED ATTACHMENT ..........................................................................................1

1. GENERAL SAFETY REGULATIONS .................................................................................5

Important safety notice

Packaging

Operating instructions

2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE ....................................6

3. MACHINE DESCRIPTION AND INCLUDED CONTENTS ...............................................7

Machine description

Supplied contents

4. ASSEMBLY OF THE MACHINE .......................................................................................7

Attaching and removing the wheel assembly

Assembly and disassembly of the telescopic pole

5. PUTTING INTO OPERATION ...........................................................................................8

Operating the tool

Working without the telescopic pole

Working with the telescopic pole

Function of the swivel head

Charging the machine

Turning on the machine

Changing the blades

Important safety instructions for chargers

Important safety instructions for batteries

6. INSTRUCTIONS FOR PROPER USE ............................................................................... 12

7. OPERATING INSTRUCTIONS ....................................................................................... 12

Operation

Purpose of use

Instructions for use

Electrical safety

8. MAINTENANCE AND STORAGE ................................................................................. 14

Maintenance

Storage

9. TECHNICAL SPECIFICATIONS ..................................................................................... 15

10. DISPOSAL ..................................................................................................................... 16

Contents

EN 5

FZN 4001-A / FZN 4002-AT

General safety regulations

1. GENERAL SAFETY REGULATIONS

Important safety notice

Carefully unpack the product and take care not to throw away any part of the packaging before you

ﬁ nd all the parts of the product.

Store the machine in a dry place out of reach of children.

Read all warnings and instructions. Not following warnings or instructions may lead to injury by

electrical shock, a ﬁ re and/or serious injuries.

Packaging

The product is packed in a package that prevents damage during transport. This package is a resource

and so can be handed over for recycling.

Operating instructions

Before you start working with the machine, read the following safety and usage instructions. Understand

the operating elements and the correct use of the device. Keep the user's manual in a safe place where

it can be easily retrieved for future use.

Note: If you hand over the machine to somebody else, do so together with the user's manual.

Following the instructions in the included user's manual is a prerequisite for the proper use of the

machine. The user's manual also contains operating, maintenance and repair instructions.

The manufacturer takes no responsibility for accidents or damages resulting from not

following the instructions in this manual.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

6

Explanation of instruction labels on the machine

2. EXPLANATION OF INSTRUCTION LABELS

ON THE MACHINE

Before putting into operation, carefully read the user's manual.

While working use protective aids.

While working use protective footwear.

Careful, sharp parts of the machine! Protect ﬁ ngers and toes against injury.

Danger while running down after being turned off!

Watch out for objects deﬂ ected by the cutting blades!

Make sure that no other person is present in the working radius. Minimum safe distance

is 6 m.

Do not use the shear in the vicinity of cables or live electricity or telephone lines. When

working maintain a distance of at least 10 m from above ground live electric lines.

Do not work in the rain or in unfavourable climatic conditions.

Symbols on the charger unit

Protection Class II

Use the charger only in a dry room.

The charger is equipped with a safety transformer.

Negative poles

EN 7

FZN 4001-A / FZN 4002-AT

Machine description and included contents | Assembly of the machine

3. MACHINE DESCRIPTION AND INCLUDED

CONTENTS

Machine description (see attached illustration)

1 Machine body

2 Swivel handle

3 Handle lock switch

4 Safety switch

5 Main power switch

6 Blade assembly for cutting grass

7 Blade assembly for cutting shrubs

8 Telescopic pole*

9 Lock switch for setting the height

of the telescopic pole*

0 Safety lock for fastening the telescopic pole

qa Accessory wheels*

qs Fastening bolt

qd LED battery charge indicator

qf Power supply slot

0 Opening for fastening the telescopic pole

* for model FZN 4002-AT

Supplied contents

Carefully take the machine out of the packaging and check whether all the following parts are present:

Cordless shear with a blade assembly for cutting grass in a protective cover

Blade assembly for cutting shrubs

Wheels*

Telescopic pole*

Battery charger

User's manual

* for model FZN 4002-AT

If there are parts missing or they are damaged, please contact the vendor from whom you bought the

machine.

4. ASSEMBLY OF THE MACHINE

1. Product is fully assembled. Take off the protective plastic blade cover before use and store it so that

it can be reused when the product is not being used.

2. The battery must be recharged before use. Follow the instructions for charging.

3. If while cutting branches the blades jam, IMMEDIATELY release the trigger switch and release the

blocked tool. If you continue to hold the trigger switch while the blades are jammed you will cause

damage to the motor.

4. IMPORTANT: This is a power tool that is very easy and comfortable to use. Please pay special

attention to the position of the blades during work with this tool so that you avoid injury.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

8

Assembly of the machine | Putting into operation

Attaching and removing the wheel assembly (see pic. 2)

Slide on the wheel frame on to the projection on the handle and tighten the fastening bolt.

To remove the wheel assembly loosen the fastening bolt and take the wheel frame off the handle.

ATTENTION: Be careful not to press the main switch when attaching or removing the wheels.

This could cause serious injuries.

Assembly and disassembly of the telescopic pole (see pic. 3)

Slide into the blade handle so that it is secured with the safety lock. The safety switch and the main

switch on the handle will not function if the telescopic pole is mounted on the tool.

To remove the telescopic pole, press the safety lock and slide the swivel handle from the machine.

5. PUTTING INTO OPERATION

Operating the tool

ATTENTION: Never remove or interfere with the function of the starting mechanism.

The start safety lock prevents your tool from being started accidentally.

Working without the telescopic pole

1. Press the release button (1) backwards and press switch (2).

2. Release the release button (1).

Note: If while using this tool the LED indicator light (3) is red, the battery is ﬂ at. Immediately stop

work and recharge the battery in the charger supplied with this tool.

Working with the telescopic pole

The length of the telescopic pole is adjustable and can be adjusted to the height of the operator.

ATTENTION: Do not use the tool's main switch when adjusting the telescopic handle. This could

cause serious injuries.

1. Attach the telescopic pole.

2. Hold the pole with one hand and then loosen the locking bolt.

3. Set the handle to the desired height and secure the pole with the adjustment bolt.

4. Press in the safety lock and press the main switch.

5. After the machine is running you may release the safety switch.

EN 9

FZN 4001-A / FZN 4002-AT

Putting into operation

Function of the swivel head (see pic. 6)

Firmly hold the handle. Move the locking button upwards and then turn the tool's head to the desired

position. Release the locking button and check that the tool's head is properly secured in the new

position.

Note: The tool's head can be secured in ﬁ ve positions (-90°, 0°, 90°, 180°).

Turned at an angle of 90° for vertical cutting of lawns - see pic. 7, 10.

Turned at an angle of 180° for cutting at heights - see pic. 8.

Setting the height for cutting and trimming lawns - see pic. 9.

Appropriate height for cutting lawns is 40 and 25mm.

Appropriate height for trimming lawns is 80, 65 and 40mm.

Charging the machine (see pic. 11)

If you wish to charge the battery, connect the adapter to a power socket (230 V ~ 50 Hz) and insert the

charger connector into the opening on the handle of the machine. The red charging indicator light will

turn on. The battery may be charged for approximately 4 hours. Make sure that you have read all the

safety instructions before using the charger. This product must not be repaired by the user. There are

no repairable parts inside the charger. The charger must be repaired by an authorised service centre

or organised by the vendor so as to prevent damaging the internal components. Read all instructions

contained in this user's manual in the section describing the charger before charging your tool's

battery.

1. Charging procedure

These chargers do not require any setup and are designed so that their use is as easy as possible.

Connect the charger to the tool. (Insert it into the charger opening on the handle).

Connect the charger power cord to a power socket. A LED charging indicator will turn light up on the

tool. Now the LED charging indicator will be red. This means that the battery is charging.

The LED diode will turn green after approximately 4 hours. This means that the battery is fully charged

.

Note: The start safety lock and the start button on the tool do not function during the charging

process.

2. Important notes for charging.

You will achieve the longest operating lifetime and performance if the battery is charged at

temperatures between 18 - 24 °C. Do not charge the battery at temperatures lower than +4.5 °C or

higher than +40 °C. This instruction is very important and prevents major damage to the battery.

While charging the charger and the battery may be warm to touch. This is a normal event and does

not indicate any problem.

Whenever possible use the charger at standard room temperature. To prevent the charger from overheating

do not cover the battery and do not charge in direct sunlight or in the vicinity of heat sources.

If the battery is not being properly charged:

1 connect a lamp or another device to the power socket to check the current in the socket.

2 check whether the socket is controlled via a light switch, which turns off the socket when the light

is turned off.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

10

Putting into operation

3 place the charger and battery in a location where the temperature is in the range of approximately

18 - 24 °C.

4 if problems with charging persist, have the charger and tool repaired at an authorised service

centre or the vendor.

The battery should be charged as soon as it stops delivering sufﬁ cient power for work which was

performed easily with a fully charged battery. DO NOT CONTINUE using the tool in these conditions.

Follow the provided procedure for charging.

Under certain conditions with the charger connected to the mains the exposed charging contacts

inside the charger may be short circuited by foreign objects. No conductive materials such as steel

wool, aluminium foil or other metal items may enter the charger opening. Always disconnect the

charger from the mains power socket if there is no battery located in the charger. Before cleaning the

charger always disconnect it from the mains power socket.

Do no submerge the charger in water or any other liquid.

WARNING: Take care that no liquid enters the charger. This could cause an injury by electrical

shock. If you want to make it easier for the battery to cool down after being used with the tool, do

not place the charger or the tool in warm places such as metal buildings or open trailers.

Turning on the machine

ATTENTION:

Press or release the start switch carefully according to the manufacturer's instructions

.

Turn on the charged machine using the On/Off switch (pic. 1, no. 5). Operation will be shown on the

LED display (pic. 1, no. 1). Turn off the machine by releasing the switch, the chuck will stop turning.

Changing the blades (see pic. 12-14)

ATTENTION: Do not use the start switch before attaching or removing the blades. Risk of injury!

The blades can be changed easily and quickly without the use of other tools.

1.

If you wish to change the blades, you must ﬁ rst remove cover (A). Follow the steps shown in the illustration above

.

Hold the tool using one hand as shown on the illustration above. Slide out the clip (B) with your

thumb and index ﬁ nger of your other hand upwards.

Firmly hold the cover and pull it backwards.

Remove the cover in the upward direction.

2. Remove the blades and attach new blades.

ATTENTION: Do not use the start switch before attaching the blade covers. Risk of injury!

1. To attach the cover follow the steps shown on the illustration below.

1 Attach the blade cover so that the two marks are aligned as shown in the top illustration.

2 Push the blade cover forwards until it is secured by the clips in the correct position.

Important safety instructions for chargers

Read all instructions and warnings located on the charger, battery and tool before using the charger.

DANGER: The charger clamps have 230V. Do not probe with conductive items. Danger of serious

or fatal injury by electrical shock.

EN 11

FZN 4001-A / FZN 4002-AT

Putting into operation

The charger and battery are speciﬁ cally designed to work together. DO NOT ATTEMPT to charge

the battery in a different charger than the charger speciﬁ ed in this user's manual.

Do not expose the charger to rain or snow.

This charger is not designed for any use other than charging rechargeable batteries. Any other use

may lead to a ﬁ re or serious or fatal injury by electrical shock.

In order to limit the risk of damaging the power plug or cable, always disconnect by pulling on the

plug and not the cable.

Make sure that the cable is not placed in such a way that it is stepped on, tripped over or that it is

not damaged or otherwise exposed to stress.

The charger is ventilated by slot openings located in the top and bottom part of the charger. Do not

place any items on the top part of the charger and do not place the charger on such surfaces, which

could block these openings, which would lead to excessive temperatures inside the charger. Keep

the charger at a sufﬁ cient distance from sources of heat.

Do not use the charger if it has been impacted by something, or if it has fallen or been damaged in

any other way.

Do not disassemble the charger. Have the charger maintained or repaired at an authorised service centre or

the vendor. Incorrectly performed assembly may lead to a ﬁ re or serious or fatal injury by electrical shock

.

In order to limit the risk of injury by electrical shock, always disconnect the charger from the mains

power socket before cleaning it. Taking the battery out of the charger does not lower this risk.

Never attempt to connect two chargers to one another.

DO NOT PLACE or use the tool in places where the temperature may reach or exceed 40 °C

(places in a garage or metal buildings in the summer period).

The charger is designed to be used with a standard domestic power voltage (230 V). Do not

attempt to use any other power voltage!

Important safety instructions for batteries

The battery is fully charged on delivery. First read the safety instructions below and follow the

instruction and charging procedures.

CAREFULLY READ ALL INSTRUCTIONS AND STORE THEM FOR FUTURE USE.

1. Do not burn the battery even if it is seriously damaged or completely worn out. The battery could

explode in the ﬁ re.

2. During demanding work or at high temperatures there may be small leaks of ﬂ uid from the battery

cells. In this case it is not a defect. However if the external seal is breached and the ﬂ uid comes in

contact with your skin, do the following:

Quickly wash yourself with soap and water.

Neutralise the affected area with a weak acid such as lemon juice or vinegar.

If the battery ﬂ uid gets into your eyes, ﬂ ush out your eyes at least for several minutes with clean

water and immediately seek medical treatment (information for doctors: the ﬂ uid is a 25 - 35 %

potassium hydroxide solution)

3. Do not bridge the cathode and the anode battery contacts with metal objects. This could short

circuit the battery, which could destroy the battery or cause burns or a ﬁ re.

4. Charge the battery only in the charger supplied with this product.

5. NOTE: This tool uses a Li-Ion type battery, which does not self-discharge and does not have

a memory effect.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

12

Instructions for proper use | Operating instructions

6. INSTRUCTIONS FOR PROPER USE

1. Prevent children and animals access to the work area.

2. Turn on the motor only in such a situation, where your hands and legs are not in the vicity of the

blades.

3. Use only spare parts and accessories recommended by the manufacturer.

4. If the tool and battery are not being used, they should be stored independently in a dry, higher

and lockable location, out of the reach of children. Make sure that it is not possible for the battery

contacts to be shorted by metal objects such as bolts, nails, etc.

5. Do not apply excessive pressure on the tool during work. The tool will perform the work better and

more safely if it is used for the purposes for which it was designed.

6. Perform meticulous maintenance of the tool

Maintain the cutting mechanism sharp and clean to ensure better and safer operation. Follow the

instructions for lubrication and replacement of accessories.

7. Prevent the situation where the tool is turned on accidentally

Do not carry the tool with the ﬁ nger on the main trigger switch.

7. OPERATING INSTRUCTIONS

Operation

This product must not be used by children and persons with physical or mental impairments or by

inexperienced persons, unless properly trained or schooled in the safe use of the product, or unless

they have been properly supervised by a qualiﬁ ed person who will be responsible for their safety.

Use extra care if the product is used near children. Always keep the appliance out of reach of

children. Children must be supervised to ensure that they do not play with the product.

Never allow children or persons who do not know the contents of this user's manual to work with

the device. Local regulations may set the minimum age of the user. The user is responsible for

damages caused to third parties in the machine's working area as a result of its use.

Do not use the machine if your are tired, under the inﬂ uence of alcohol or narcotics.

If necessary, use personal protection aids (gloves, work footwear, eye protection, respirators, etc.).

Secure loose clothing, long hair or jewellery so that they cannot get caught by the moving parts of

the machine.

Purpose of use

The cordless grass shear & hedge trimmer is intended for use in private gardens.

Machines considered to be suitable for use in private gardens are such devices, where the annual

operation as a rule does not exceed 50 operating hours and which are predominantly used for the

maintenance of lawn areas, but not public facilities, parks, sports ﬁ elds or in agriculture or forestry.

Do not use the product for purposes other than those intended.

For safety reasons the machine must not be used as a drive engine for any other work tools and

tool sets, unless expressly permitted by the manufacturer.

EN 13

FZN 4001-A / FZN 4002-AT

Operating instructions

Instructions for use

Turn on and operate the machine as described in the user's manual, carefully follow all instructions.

Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power

cable from the mains power supply.

Use tools in good working condition for tasks for which they are designed.

Work only during good visibility or ensure sufﬁ cient artiﬁ cial lighting.

Only store and use the product away from ﬂ ammable or volatile materials and solutions.

Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not

use in a dusty environment.

Do not place the product near heaters, open ﬁ res or other appliances or equipment that are sources

of heat.

Do not spray the product with water or any other liquid. Do not pour water or any other liquids into

the appliance. Do not submerge the appliance in water or any other liquid.

Never leave the appliance switched on without supervision.

Do not touch machine parts until they have come to a complete stop.

Allow the motor to cool down before storing the machine in a closed room.

Under no circumstances should you repair or alter the product yourself! Entrust all repairs and

adjustments of this product to an authorised service centre or the vendor. Tampering with the

appliance during the warranty period may void the warranty.

The manufacturer is not responsible for damages caused by incorrect use of this product or its

accessories. Such damages include food spoilage, injuries, burns, scalding, ﬁ re, etc.

Using accessories or attachments that are not recommended in this user's manual may increase the

risk of injury.

Make sure that the correct battery for this tool is used.

Before connecting to the charger check that the surface of the tool and battery is clean and dry.

Make sure that the battery is charged using the correct charger, which is recommended by the

manufacturer. Incorrect use may lead to a risk of injury by electrical shock, overheating of the

battery or leakage of battery ﬂ uid.

Have the tool repaired only by a qualiﬁ ed person

This tool is manufactured in accordance with the demands of respective safety regulations. Repairs

should only be performed by qualiﬁ ed persons using original spare parts. Otherwise the user will

be placed in signiﬁ cant danger.

Disposal of batteries

Ensure that the batteries are safely disposed of according to the manufacturer's instructions.

Electrical safety

The charger of the cordless grass shear & hedge trimmer can be connected to any power plug,

preventing discharge, that is installed according to norms in force.

The plug must be powered at 230 V ~ 50 Hz.

Disconnect the charger if you will not be using it for a long time, if you are changing the tool or

performing maintenance on the tool.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

14

Maintenance and storage

8. MAINTENANCE AND STORAGE

Maintenance

ATTENTION:

Disconnect the charger if you will not be using it for a long time, if you are changing

the tool or performing maintenance on the tool.

Check whether the device is showing signs of wear.

If the charger is damaged (cover, conductors or connector), immediately arrange their replacement

at an authorised service centre or from the vendor.

Regular care for the machine will ensure not only a long lifetime and performance

Before use always visually check for worn or damaged parts.

Replace damaged or worn parts. To ensure that the machine always remains balanced, always

replace the entire set of the worn or damaged tools.

Worn or damaged machine parts may only be replaced at an authorised service centre or arranged

by the vendor.

Before cleaning disconnect this product from the power source.

To clean the plastic parts of the product, use a soft cloth dipped in lukewarm water. Do not use

aggressive cleaning products and solvents as this could damage the surface of the appliance.

Do not clean the machine under running water or submerge under water.

After changing the working tool, check that the working tool is secured in its storage position.

After each use of the shear the blade must be cleaned and lubricated. If the shear is used non-stop

for extended periods of time, lubrication should be performed during work.

Storage

Store the tool in a dry location at a sufﬁ cient distance from heat sources or dangerous vapours.

Do not place any other items on the machine.

EN 15

FZN 4001-A / FZN 4002-AT

Technical speciﬁ cations

9. TECHNICAL SPECIFICATIONS

Battery 3.6 V/1300 mAh

Battery type Li-ion

Idling speed 1,000 rpm

Length of blade assembly for cutting

shrubs

110 mm

Width of blade assembly for cutting

grass

80 mm

Battery capacity 1.3 Ah

Charging time 4 hours

Weight 0.6 kg

1.0 kg (with telescopic pole - model FZN 4002-AT)

Charger

Input charging voltage 230 V ~ 50 Hz

Output voltage 6 V, direct current, 500 mA

Amendments to text and technical parameters are reserved.

Changes in the text, design and technical speciﬁ cations may change without prior notice and we

reserve the right to make these changes.

EN

CORDLESS GRASS SHEAR & HEDGE TRIMMER USER'S MANUAL

16

Disposal

10. DISPOSAL

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING

MATERIALS

Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that

this product shall not be treated as household waste. Please, dispose of this product

at your applicable collection point for the recycling of electrical & electronic equipment

waste. Alternatively in some states of the European Union or other European states

you may return your products to your local retailer when buying an equivalent new

product. The correct disposal of this product will help save valuable natural resources

and help in preventing the potential negative impact on the environment and human

health, which could be caused as a result of improper liquidation of waste. Please

ask your local authorities or the nearest waste collection centre for further details. The

improper disposal of this type of waste may fall subject to national regulations for ﬁ nes.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary

information from your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the

correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design and technical speciﬁ cations may occur without prior notice and we

reserve the right to make these changes.

EN 17

FZN 4001-A / FZN 4002-AT

Notes

CZ

AKUMULÁTOROVÉ NŮŽKY NA TRÁVU A NŮŽKY NA ŽIVÉ PLOTY NÁVOD K OBSLUZE

18

Akumulátorové nůžky

na trávu a živé ploty

NÁVOD K OBSLUZE

Děkujeme vám, že jste si zakoupili tyto akumulátorové nůžky na zastřihávání okrajů

trávníků a tvarování okrasných keřů. Než je začnete používat, přečtěte si, prosím,

pozorně tento návod k obsluze a uschovejte jej pro případ dalšího použití.

OBSAH

OBRAZOVÁ PŘÍLOHA ...................................................................................................1

1. VŠEOBECNÉ BEZPEČNOSTNÍ PŘEDPISY .................................................................... 19

Důležitá bezpečnostní upozornění

Obal

Návod k použití

2. VYSVĚTLENÍ ŠTÍTKŮ S POKYNY NA STROJI .................................................................20

3. POPIS STROJE A OBSAH DODÁVKY .......................................................................... 21

Popis stroje

Obsah dodávky

4. MONTÁŽ STROJE ......................................................................................................... 21

Nasazení a sejmutí sestavy koleček

Montáž a demontáž teleskopické tyče

5. UVEDENÍ DO PROVOZU ..............................................................................................22

Obsluha nářadí

Práce bez teleskopické tyče

Práce s teleskopickou tyčí

Funkce otočné hlavy

Nabíjení stroje

Zapnutí stroje

Výměna nožů

Důležité bezpečnostní pokyny pro nabíječky

Důležité bezpečnostní pokyny pro baterie

6. POKYNY KE SPRÁVNÉMU POUŽITÍ .............................................................................26

7. POKYNY K POUŽITÍ ......................................................................................................26

Obsluha

Účel použití

Pokyny k používání

Elektrická bezpečnost

8. ÚDRŽBA A USKLADNĚNÍ .............................................................................................28

Údržba

Uskladnění

9. TECHNICKÉ ÚDAJE ......................................................................................................29

10. LIKVIDACE ...................................................................................................................30

Obsah

CZ 19

FZN 4001-A / FZN 4002-AT

Všeobecné bezpečnostní předpisy

1. VŠEOBECNÉ BEZPEČNOSTNÍ PŘEDPISY

Důležitá bezpečnostní upozornění

Výrobek pečlivě vybalte a dejte pozor, abyste nevyhodili žádnou část obalového materiálu dříve,

než najdete všechny součásti výrobku.

Stroj uchovávejte na suchém místě mimo dosah dětí.

Čtěte všechna upozornění a pokyny. Zanedbání při dodržování varovných upozornění a pokynů

mohou mít za následek úraz elektrickým proudem, požár a/nebo těžká poranění.

Obal

Výrobek je umístěn v obalu bránícím poškozením při transportu. Tento obal je surovinou a lze jej proto

odevzdat k recyklaci.

Návod k použití

Než začnete se strojem pracovat, přečtěte si následující bezpečnostní předpisy a pokyny k používání.

Seznamte se s obslužnými prvky a správným používáním zařízení. Návod pečlivě uschovejte pro

případ pozdější potřeby.

Poznámka: Předáváte-li stroj dalším osobám, předejte jej společně s návodem. Dodržování

přiloženého návodu k obsluze je předpokladem řádného používání stroje. Návod k obsluze

obsahuje rovněž pokyny pro obsluhu, údržbu a opravy.

Výrobce nepřebírá odpovědnost za nehody nebo škody vzniklé následkem nedodržování

tohoto návodu.

Stránka sa načítava...

Fieldmann FZN 4001-A Používateľská príručka

Tento návod je vhodný aj pre

Fieldmann FZN 4001-A Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty