- 13 -
Important!
The appliance and its ancillaries are not suitable
for being cleaned in a dish washing machine!
Do not use any chemical cleaning agents or
solvents to clean the Bread Maker.
Housing, lid, baking space
Remove all particles left behind inside the baking
area using a wet cloth or a slightly wet soft sponge.
Wipe the housing and the lid too, only with a moist
cloth or sponge.
• Ensure that the interior is completely dry. For
easier cleaning, the appliance lid can be
removed from the housing:
• Open the appliance lid until the wedge-
shaped hinge cams pass through the openings
of the hinge guides.
• Pull the appliance lid out of the hinge guides.
• To reassemble the appliance lid , guide the
hinge cams through the opening of the hinge
guides.
Baking mould, kneading paddles
and accessories
Important!
Never submerse the baking mould in water or
other liquids.
The surfaces of the baking moulds and knea-
ding paddles have a non-stick coating. When
cleaning the appliance do not use aggressive
detergents, cleaning powders or objects that may
cause scratches to the surfaces.
Due to moisture and vapours the surfaces of
various parts may undergo changes in their appea-
rance over a period of time. This has no influence
on the function nor does it reduce the quality of the
baking results.
• Before cleaning, remove the baking mould
and the kneading paddles from the baking
chamber.
• Take the kneading paddles out of the baking
mould . Should the kneading paddles not
come out of the baking mould , fill the baking
mould with hot water for around 30 min. The
kneading paddles should now come out easily.
Clean the kneading paddles in warm water
containing a mild detergent. If there are any stub-
born encrustations, allow the kneading paddles
to soak in the rinsing water until the encrustations
come away with the aid of a washing-up brush.
Should the mountings in the kneading paddles
be blocked, these can be carefully cleaned with
a wooden toothpick.
After cleaning, dry the kneading paddles tho-
roughly.
• Wipe the external surfaces of the baking mould
with a damp cloth.
• Clean the internal areas of the baking mould
with warm water containing a little detergent. If
there are any encrustations in the baking mould ,
fill the baking mould with water and add a
little mild detergent. Allow this to stand for as
long as necessary until the encrustations are
soaked and can be removed using a washing-up
brush. After this, rinse the baking mould with
plenty of clean water and then dry it thoroughly.
• Clean the measuring cup , the measuring
spoon and the kneading paddle remover
in warm water and add a mild detergent.
Afterwards, rinse the parts with plenty of clean
water to remove all detergent residues.
Dry everything thoroughly.