Sencor SDV 7406H Používateľská príručka

DVD PLAYER

SDV 7406H

USER'S MANUAL

EN

SDV 7406H Sencor EN CZ SK HU PL.indb EN1 5.5.2015 11:00:30

SDV 7406H Sencor EN CZ SK HU PL.indb EN2 5.5.2015 11:00:37

EN 1

EN

Contents

BEFORE STARTING TO OPERATE THIS PRODUCT, READ CAREFULLY THIS

INSTRUCTION MANUAL. STORE IT FOR LATER REFERENCE. NOTE THE MODEL

NUMBER AND THE SERIAL NUMBER. LOOK AT THE LABEL ON THE BACK COVER

AND PASS THE INFORMATION PROVIDED THERE TO YOUR DEALER IN CASE THAT

YOU WOULD NEED SERVICING.

Contents

1. Important safety instructions .........................................................................................................2

2. Features ............................................................................................................................................. 6

3. Device .................................................................................................................................................7

3.1. Front panel ................................................................................................................................7

3.2. Rear panel .................................................................................................................................7

4. Remote controller .............................................................................................................................8

5. Connections .....................................................................................................................................10

5.1. Connecting the video system .............................................................................................10

5.2. Connecting the audio system.............................................................................................. 11

6. System setup .................................................................................................................................. 13

6.1. Menu control ........................................................................................................................... 13

6.2. GENERAL SETUP ................................................................................................................. 13

6.3. AUDIO SETUP PAGE ........................................................................................................... 14

6.4. VIDEO SETUP PAGE ............................................................................................................16

6.5. PRE-SET PAGE.......................................................................................................................17

6.6. PASSWORD SETUP PAGE ................................................................................................ 18

7. Playback ...........................................................................................................................................19

7.1. PLAYBACK FROM DISC ......................................................................................................19

7.2. PLAYBACK FROM USB .....................................................................................................19

7.3. PLAYBACK FROM MP3/MPEG4 DISCS .........................................................................19

8. Troubleshooting............................................................................................................................... 21

9. Technical speciﬁ cations ............................................................................................................... 23

SDV 7406H Sencor EN CZ SK HU PL.indb 1 5.5.2015 11:00:37

2 EN

EN

Important safety instructions

1. Important safety instructions

If you want to use the product properly, read the manual carefully and keep it for future

reference.

General safety instructions

• Read these instructions. Keep the manual in asafe place in case you want to consult

it in the future. If you will sell or give it to athird party, pass with the device the

manual as well.

• Follow this manual and the instructions inside.

• Heed all warnings.

• Follow all instructions.

• Use only the attachments and accessories speciﬁ ed by the manufacturer.

• You must not put an open ﬂ ame on the device, e.g. aburning candle.

• Use the device in temperate climate.

• Under no circumstances are the manufacturer or vendor liable for any direct or

indirect damage caused by the failure to observe the instructions for installation,

conﬁ guration, operation, treatment and cleaning of this device included in this

manual.

• Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.

• Prior to granting children consent to use the device, they shall become familiar with

the proper and safe use of the player, corresponding to their age.

Installation, control

• Install the device according to the instructions in the manual.

• Leave free space around the device, it is necessary for proper air circulation. It helps

to dissipate the heat generated by the operation of the device. By covering the air

vents of the cabinet, you risk overheating and damage of the device. It is important

to ensure that ventilation of the device is not prevented by covering the ventilation

openings with e. g. newspaper, tablecloth, drapes, etc. Follow the installation

instructions in the manual.

• Do not install the device in direct sunlight, or close to heat sources, like radiators,

heat exchangers, stoves or other appliances (including ampliﬁ ers) producing heat.

High temperatures shorten the life of the electronic components of the device

signiﬁ cantly. Do not use and do not leave the device near an open ﬁ re.

• The device must not be exposed to dripping or running water and you must not place

upon it objects ﬁ lled with liquid, e.g. vases. Protect the device against becoming wet,

sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do

not use the device outdoors. You risk electric shock or ﬁ re by not adhering to these

instructions.

• Do not use the device close to water.

• Do not try to defeat the purpose of the polarized plug. If you cannot ﬁ t the plug in the

outlet, contact an electrician to replace the obsolete outlet.

• Before connecting the unit to awall outlet, ﬁ rst make sure that the voltage in your AC

outlet matches the voltage on the on the device type label.

SDV 7406H Sencor EN CZ SK HU PL.indb 2 5.5.2015 11:00:37

EN 3

EN

Important safety instructions

• Make sure that the power cable is not stepped on or pinched, especially close to

the plug, the outlet and at the point where it leaves the unit. The plug is used as

adisconnecting device and must be easily accessible.

• Remember, before you disconnect the power cord when you power the device,

always disconnect the plug from the wall outlet.

• Disconnect the power cord from the power outlet during thunderstorms, or when not

in use for alonger period of time.

• Avoid carrying the device from acool environment into awarm environment or vice

versa, or operating the device in amoist environment. Air moisture may condense in

some areas within the device case and may cause the device to become temporarily

inoperable. In this case, leave the device in awarm and well-ventilated area and

leave for 1–2 hours until the moisture evaporates. The device can be normally used

again. Be especially cautious when using the device for the ﬁ rst time during acool

season immediately after purchasing.

Service and maintenance

• To avoid risks of electric shock or ﬁ re, do not remove the device from the case – the

case does not contain components that the user could repair or adjust without the

necessary equipment and qualiﬁ cation. Refer to aprofessional service centre if your

device requires service.

• In the event of any unusual occurrences during the use of the device, e.g. smelling

the characteristic smell of burning insulation or even seeing asmoke, turn the device

off immediately, disconnect the power supply and wait with continuing use of the

device until you learn the result of its inspection by the service personnel.

• Leave all service to qualiﬁ ed service personnel. Service is necessary when the device

is damaged in any way, for example in case of damage to the power cord, spilling

liquid on the device, intrusion of foreign objects into the device, when the device is

exposed to rain or moisture, if the device does not function in the usual manner or if

it fell.

• Clean the device with adry cloth only.

Remote control and batteries

• Do not expose the remote control and batteries to direct sunlight or heat sources,

such as radiators, heat exchangers, ovens or other appliances (including ampliﬁ ers)

producing heat. Do not use and do not leave the device near an open ﬁ re.

• Remote control and batteries may not be exposed to dripping or running water and

no objects ﬁ lled with water should be placed on them, for example, vases. Protect

them from getting wet, from being sprayed or from spilled liquid of any kind. Do not

use outdoors. Failure to do so, risks damage to the remote control or batteries.

• Do not use the device close to water.

• It is necessary to consider the environmental impact when liquidating the batteries.

• Using the batteries incorrectly can result in leakage and corrosion. Follow the

following instructions to ensure proper remote control operation:

– Do not insert the batteries in the wrong direction.

– Do not charge, heat, open or short the batteries.

SDV 7406H Sencor EN CZ SK HU PL.indb 3 5.5.2015 11:00:37

4 EN

EN

Important safety instructions

– Do not throw batteries into aﬁ re.

– Do not leave dead batteries in the remote controller.

– Do not combine various types of batteries or old and new batteries.

– If you do not use the remote controller for alonger period of time, remove the

batteries to prevent damaging the remote controller by the batteries leaking out.

– If the remote control does not work properly or its effective range decreases,

change all the batteries for new ones.

– If there is an electrolyte leakage from the batteries, have the remote control

serviced by an authorized technician.

NOTICE

To prevent risk of ﬁ re or electric shock, do not expose the device to rain or

moisture.

NOTICE

The batteries must not be exposed to excessive heat, for example sunlight, ﬁ re,

etc.

The symbol warns that the inside of this unit contains dangerous voltage,

which poses arisk of electric shock.

The symbol indicates important operating and service instructions in the

documentation accompanying the device.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

To reduce the risk of electric shock, do not open the cover. Refer to qualiﬁ ed

service technicians for repair work.

DVD player

This DVD player uses alaser system. To learn to use this device properly, please, read

this manual and keep it for later reference. The opening for discs is located on the side

for safety reasons, to prevent exposure to laser radiation. Do not try to change or alter the

opening for discs in any way. When inserting the disc into the player or during the replay,

do not look into the opening for discs. Visible laser radiation could be emitted. Do not look

at the laser beams.

SDV 7406H Sencor EN CZ SK HU PL.indb 4 5.5.2015 11:00:37

EN 5

EN

Important safety instructions

CLASS 1

LASER PRODUCT

NOTICE:

THIS DVD PLAYER IS ACLASS 1 LASER PRODUCT. USING CONTROLS, OR

SETUP OR PROCEDURES NOT LISTED IN THIS MANUAL MAY RESULT IN

EXPOSURE OF PEOPLE TO DANGEROUS RADIATION. SINCE THE LASER

BEAM USED IN THIS DEVICE IS HARMFUL TO HUMAN EYESIGHT, DO NOT

TRY DISASSEMBLE THE PLAYER. ALL SERVICE SHOULD BE DONE BY

QUALIFIED PERSONEL.

WARNING

UNDER THE FCC REGULATIONS, ANY CHANGE OR ALTERATION NOT

EXPRESSLY APPROVED BY THE MANUFACTURER OR BY HIS AUTHORIZED

REPRESENTATIVE MAY LEAD TO CANCELLATION OF THE RIGHT OF THE

USER TO USE THE DEVICE.

This device is equipped with anti-copying technology, protected by USA patents and other

rights for the protection of the intellectual property of ROVI. Reverse engineering and

disassembly is prohibited.

Concerning the USB connector:

• USB memory device must be plugged directly into the device.

• Do not use aUSB extension cable, it might cause data transfer failure or interference.

Electrostatic discharges may cause malfunction. In this case, the user must restart

the device. The player can play similar types of ﬁ les and formats from the USB

device like from the disc. Before you use USB memory device try its communication

function with the device and the speed of reading data. Remember that reading of

data via external connector can be slower and the ﬁ les with high data ﬂ ow may not

be played correctly.

For maximum reading speed, we recommend to keep the disc space defragmented.

Use ﬁ le system FAT32, single partition, no protection. If the reading of the memory

device is not smooth, it can lead to undesirable effects, such as losing part of the

picture (blocking) or all of it, sound problems and in extreme case stopping the

reading operation. Unexpected behaviour of the memory device or the presence of

viruses or other malware, may cause stopping of functioning of the device and need

to be restarted.

The USB connector is of standard type and cannot supply power to highly powered

USB devices (e. g. hard discs HDD). Use devices with their own power supply and

power them from their own power.

The device was designed for maximum compatibility with memory devices. Due

to the wide range of the devices on the market, it is not possible to guarantee

compatibility with every USB device. In case of difﬁ culties, try to format the memory

device directly inside the device. If difﬁ culties persist, use another memory device.

SDV 7406H Sencor EN CZ SK HU PL.indb 5 5.5.2015 11:00:38

6 EN

EN

Features

2. Features

• Integrated digital audio decoder compatible with Dolby Digital, MPEG, PCM etc.

96kHz/24bit audio digital processor.

• Intelligent software update.

• Component high deﬁ nition video out.

• Coaxial digital audio out

• Multimedia USB port.

• Compatible with DVD, VCD, DVCD, CD, DVD+R/RW, DVD-R/RW, MP3, MPEG4,

DIVX, Kodak Picture CD etc. Highly integrated servo system, decoding to single-chip

technology, high reliability and stability and top class error correction.

Accessories

User's manual Remote controller A/V cable

Compatible discs and media:

Types of discs Symbol Contents

DVD

Audio + Video

MP3

Sound

Video-CD

(VCD)

Audio + Video

CD-DA

Audio

Picture CD

JPEG Photo CD

Kodak Picture CD

Electronic photos

MPEG-4

V I D E O

Audio + Video

SDV 7406H Sencor EN CZ SK HU PL.indb 6 5.5.2015 11:00:38

EN 7

EN

Device

3. Device

3.1. Front panel

1. Off

2. USB port

3. OPEN/CLOSE button

4. PLAY button (

B

)

5. STOP button (

x

)

3.2. Rear panel

1. HDMI output

2. Mixed L/R audio out

3. Component video out

4. Coaxial digital out

5. Composite video out

6. S-video output

SDV 7406H Sencor EN CZ SK HU PL.indb 7 5.5.2015 11:00:39

8 EN

EN

Remote controller

4. Remote controller

1. OPEN/CLOSE

2. VOLUME +/-

3. SUBTITLE

4. AUDIO

5. PROG

6. SLOW

7. OSD

8. A-B

9. SETUP

10. UP

11. LEFT

12. SCORE

13. DVD/USB

14. P/N

15. ANGLE

16. NUMERICAL BUTTONS

17. REV/FWD

18. STOP

19. RESET

20. BACK

21. NEXT

22. TITLE

23. RIGHT

24. PBC

25. DOWN

26. V-MODE

27. ZOOM

28. MUTE

29. L/R

30. GOTO

Remote controller use

Insert two AAA / 1.5 Vbatteries into the controller. Aim the remote controller directly at

the sensor on the front panel. The remote controller works at adistance of up to 8 metres

from the sensor and at an angle of about 30 degrees left and right.

SDV 7406H Sencor EN CZ SK HU PL.indb 8 5.5.2015 11:00:39

EN 9

EN

Remote controller

Inserting batteries

Remove the cover of the

battery compartment

on the back side of the

controller.

Insert the batteries into the

battery compartment. Mind the

proper battery polarity according

to the + and - symbols shown

inside the compartment. Place the cover back on.

SDV 7406H Sencor EN CZ SK HU PL.indb 9 5.5.2015 11:00:39

10 EN

EN

Connections

5. Connections

5.1. Connecting the video system

The following video outputs are available with the device.

Composite video

Use the yellow AV cable plug to connect the composite video output of the device to the

TV/monitor input.

S-Video

Use the S-Video cable to connect the S-Video output of the device to the TV/monitor

S-Video input.

Component video

Use the 3-wire Video cable to connect the component outputs of the device to the

corresponding TV/monitor inputs.

TV/monitor video in

DVD player video out

Component video in

Component video out

Composite video in and

S-Video in

Composite video out and

S-Video out

SDV 7406H Sencor EN CZ SK HU PL.indb 10 5.5.2015 11:00:39

EN 11

EN

Connections

Notes:

Component is the best of the video outputs above, S-VIDEO out is good and composite

video output is standard.

Use the best video signal connection available.

Do not perform all connections at the same time, otherwise the quality of the

generated picture will be inﬂ uenced.

The player generates the corresponding video output only when the video settings

correspond to the video system connection used (see Video output setup in chapter

System setup).

5.2. Connecting the audio system

There are two types audio out systems. The analogue and digital audio out system.

The analogue audio out system includes atwo-channel stereo output. The digital audio

out system contains acoaxial output.

Stereo out

Use the pair of audio cables (white for left, red for right channel) to connect the stereo

audio outputs of the device to the TV or ampliﬁ er stereo outputs.

Digital output (coaxial)

Use the coaxial cable to connect the coaxial output of the device to the coaxial input of

the ampliﬁ er/receiver equipped with its own digital decoder. The player only transfers

audio from the disc/media to be processed via an external device, including for example

multi-channel audio.

SDV 7406H Sencor EN CZ SK HU PL.indb 11 5.5.2015 11:00:40

12 EN

EN

Connections

TV/monitor/ampliﬁ er audio in

DVD audio out

2 channel audio in

2 channel audio out

Digital audio in

Digital audio out

Note:

The audio setup should correspond to the actual audio system connection. Please

check. Follow the instructions speciﬁ ed in the Audio setup section of chapter System

setup.

SDV 7406H Sencor EN CZ SK HU PL.indb 12 5.5.2015 11:00:40

EN 13

EN

System setup

6. System setup

6.1. Menu control

1. Press the [SETUP] button to display the setup menu.

2. Press [  ]/[  ] to select an item. The sub-menu for the selected item will

immediately appear below.

3. Press [  ] to enter the sub-menu.

4. Press [  ]/[  ] to select the sub-menu item you wish to setup, and press [ENTER]/

[  ] to enter setup. Press [  ]/[  ] to select an option and conﬁ rm with [ENTER] or

cancel by pressing [  ].

5. You can then press [  ]/[  ] and continue in the setup of additional items from this

sub-menu.

6. Press [  ] to return to the parent menu.

7. Press the [SETUP] button again to exit the setup menu.

Note:

The item you are currently setting is highlighted green. The current value is brown. If

the value is correct and does not require adjusting, you do not have to enter the sub-

menu (  ) and you can continue on to the next item (  /  ).

6.2. GENERAL SETUP

6.2.1. TV DISPLAY

If the device is connected to astandard TV, select 4:3 PANSCAN or 4:3 LETTERBOX.

Apicture with a4:3 aspect ratio is displayed full screen with the native aspect ratio.

4:3 PANSCAN: Awidescreen picture is displayed on the screen with the native aspect

ratio, while part of the picture will be cropped on the left and right.

4:3 LETTER BOX: Awidescreen picture is displayed on the screen with the native aspect

ratio with black strips above and below the picture.

If the device is connected to awidescreen TV, select 16:9.

16: 9: Awidescreen picture is displayed on the screen with the native aspect ratio, while

the picture with a4:3 aspect ratio is expanded to width in order to ﬁ ll the screen.

6.2.2. ANGLE SYMBOL

Set this item to ON. When adisc with multiple camera angles is played, the angle

symbol will appear on the screen. You can then watch the video from various camera

angles after pressing the [ANGLE] button on the remote controller.

Turn off the function by setting the item to OFF.

Note:

This function can only be used for discs coded with multiple camera angles.

SDV 7406H Sencor EN CZ SK HU PL.indb 13 5.5.2015 11:00:40

14 EN

EN

System setup

6.2.3. SETUP LANGUAGE (On-screen menu language)

This item is used to set the on-screen menu language.

SUBTITLES/CAPTIONS

Subtitles (for DVD) will be displayed when this item is set to ON. Subtitles are hidden

when set to OFF.

Subtitles can be displayed or hidden by pressing [SUBTITLE] on the remote controller.

Note:

This function can only be used for discs coded with subtitles.

6.2.4. SCREENSAVER

ON: If the screen is idle without movement, for example when disc playback is paused,

stopped, etc., the screensaver will appear on the screen after several minutes. Press any

button except for [STANDBY] to wake the screen up.

OFF: Disabling the screensaver function.

6.2.5. HDCD (High Deﬁ nition Compatible Digital)

HDCD (High Deﬁ nition Compatible Digital) is apatented coding/decoding process that

ensures the richest and highest detail of audio on CD discs coded in HDCD format. The

digital ﬁ lter under this item can be set to 2X, 1X or OFF.

6.2.6. LAST MEMORY

ON: The player remembers the last playback time when the disc compartment is opened

during playback, paused playback, or playback is stopped completely. When the same

disc is inserted back into the device, playback will resume from the stored time.

OFF: Disabling the last memory function.

6.3. AUDIO SETUP PAGE

6.3.1. SPEAKER SETUP (ANALOGUE AUDIO)

DOWNMIX

LT/RT: Multi-channel audio is merged into the left and right channel and played via the

left and right front speaker.

STEREO: Astereo signal is selected from amulti-channel audio stream and played via

the left and right front speaker.

Note:

This function only relates to 5.1 channel discs coded in Dolby AC-3 format.

SDV 7406H Sencor EN CZ SK HU PL.indb 14 5.5.2015 11:00:40

EN 15

EN

System setup

6.3.2. DIGITAL AUDIO SETUP

DIGITAL S/PDIF OUT

SPDIF/ OFF: Adigital audio signal will not be available. (Coaxial output off)

SPDIF/RAW: The digital audio signal input will be in raw format (as recorded on the disc,

for external processing).

SPDIF/PCM: The digital audio signal input will be in PCM format (linear audio, if

available).

6.3.3. KARAOKE SETUP

This item is available if the DIGITAL OUT item is set to SPDIF/PCM.

Select the sampling frequency for the digital audio output. The available options are 48

kHz and 96 kHz.

Note:

Some ampliﬁ ers do not support 96kHz sampling, which has an effect on the coaxial

output.

6.3.4. CHANNEL DELAY

This item is used to set the delay of the centre speaker, rear speakers and subwoofer.

The delay is used to compensate the time difference in transmitting audio caused by the

difference in speaker distance from listeners.

Use the arrow keys [  ]/[  ] to select the centre speaker, subwoofer, left or right 3D

speaker.

Then use the arrow keys [  ]/[  ] to set the differences in distance.

6.3.5. EQUALIZER

AUDIO MODE

Select the mode that best ﬁ ts your taste ROCK, POP, LIVE, DANCE, TECHNO, CLASSIC

or SOFT, or select NONE if you do not care to omit sound effects.

6.3.6. 3D PROCESSNG

REVERB MODE

Select the mode that best ﬁ ts your taste CONCERT, LIVING ROOM, HALL, BATHROOM,

CAVE, ARENA or CHURCH, or select NORMAL to disable the reverb effect.

6.3.7. DOLBY DIGITAL SETTINGS

DUAL MONO

STEREO: The player transmits the audio signal of the left and right channel and played

via the left and right front speaker.

L-MONO: The player only transmits the audio signal of the left channel to the left and

right front speaker.

SDV 7406H Sencor EN CZ SK HU PL.indb 15 5.5.2015 11:00:40

16 EN

EN

System setup

P-MONO: The player only transmits the audio signal of the right channel to the left and

right front speaker.

MIX- MONO: The player transmits the mean signal of the left and right channel to the left

and right front speaker.

Note:

This function only relates to 2 channel discs coded in Dolby AC-3 format.

6.3.8. DYNAMICS

When you are watching Dolby Digital ﬁ lms with awide dynamic range at alow volume,

for example during the night, you can reduce the dynamics to avoid losing audio details

due to the low volume settings.

6.4. VIDEO SETUP PAGE

6.4.1. COMPONENT VIDEO OUT

Used to set the video output to YUV or S-Video, if the S-Video connection is used.

Note:

If the video settings differ from the physical connections, the resulting TV picture may

be of less quality. Press [V-MODE] on the remote controller repeatedly to switch to the

respective video output mode.

If the video setting differ from the actual video signal connected (with the exception to

composite videos), the picture may not be displayed on the TV or it may be of very

low quality. In such acase, the settings for this item shall be restored to ensure the

right video output mode or press [V-MODE] until the picture becomes normal.

6.4.2. RESOLUTION

For high deﬁ nition compatible outputs (HDMI, component) you can select resolutions from

480/576i to 1080p.

NOTICE

See the TV manual to determine the highest supported resolution and do

not exceed this setting. Exceeding this setting could result in the picture

disappearing, or in rare cases, the TV could become damaged.

6.4.3. QUALITY SETUP

SHARPNESS

There are three available options under this item (HIGH, MEDIUM and LOW).

SDV 7406H Sencor EN CZ SK HU PL.indb 16 5.5.2015 11:00:40

EN 17

EN

System setup

BRIGHTNESS, CONTRAST

Select one of the items, use the arrow buttons [  ]/[  ] to set the value and then conﬁ rm

with [ENTER].

6.4.4. HDMI SETUP

HDMI

You can enable or disable the HDMI output.

6.4.5. AUDIO SOURCE (AUDIO)

HDMI audio can be set automatically according to the disc (AUTO) or forced by selecting

PCM linear audio (provided it is included on the disc).

6.5. PRE-SET PAGE

This item is available when there is not disc in the compartment, the compartment is

open or the disc in the compartment is stopped.

6.5.1. TV TYPE

This product supports NTSC (National Television System Committee) and PAL (Phase

Alternating Line) television broadcasting standards.

PAL: Select this mode if the connected TV uses the PAL system. The video signal of an

NTSC disc will be transmitted in PAL format.

AUTO: Select this mode if the connected TV uses multiple systems. The video signal

output format will correspond with the disc video signal.

NTSC: Select this mode if the connected TV uses the NTSC system. The video signal of

an PAL disc will be transmitted in NTSC format.

Note:

If the setup is incorrect, the picture quality will be of very low quality. In such cases,

adjust the settings for this item to eliminate the error.

6.5.2. AUDIO, SUBTITLES and DISC MENU

Select the desired language for audio, subtitles and disc menu under these items.

The audio language selection can also be set by pressing [AUDIO] and the subtitle

language can be set by pressing [SUBTITLE] on the remote controller.

Note:

If the selected language for the current disc being played is not available, the default

disc settings will remain selected.

SDV 7406H Sencor EN CZ SK HU PL.indb 17 5.5.2015 11:00:40

18 EN

EN

System setup

6.5.3. PARENT LOCK

This item allows the user to set the maximum score for aﬁ lm that can be watched. Films

with scores higher than the parent lock score cannot be watched. You must enter the right

password to reset the default settings. The default password is 0000.

Note:

This function is only available for discs with available parent lock.

6.6. PASSWORD SETUP PAGE

6.6.1. PASSWORD MODE

The password function can be enabled or disabled under this item. Apassword is used for

discs with adeﬁ ned level of unsuitable content.

Note:

Prior to changing the settings for this item, you must enter the correct password and

conﬁ rm by pressing [ENTER]. The default password is 136900.

6.6.2. PASSWORD

The password can be changed under this item. Enter the current password and then the

new password. You are required enter the new password again to rule out entering an

incorrect password.

6.6.3. DEFAULT SETTINGS

Use this function to restore all default settings with the exception of PARENT LOCK and

PASSWORD.

SDV 7406H Sencor EN CZ SK HU PL.indb 18 5.5.2015 11:00:40

Stránka sa načítava ...

Sencor SDV 7406H Používateľská príručka

Sencor SDV 7406H Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty