Silvercrest SBS 60 B2 Operation and Safety Notes

TV STEREO SOUND BASE

SBS 60 B2

IAN 288637

TV STEREO SOUND BASE

Operation and safety notes

TV STEREO SOUNDBASE

Pokyny pro obsluhu a bezpečnostní pokyny

TV-STEREO-SOUNDBASE

Navodila za upravljanje in varnostna opozorila

TV-STEREO-SOUNDBASE

Bedienungs- und Sicherheitshinweise

GB Operation and safety notes Page 5

SI Navodila za upravljanje in varnostna opozorila Stran 20

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 36

DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 51

A

23

Top view / Pohled shora / Pogled od zgoraj / Ansicht von oben

6 105 7 8 9

11 12 13 14 15 1716

22

18

19

20

21

1 2 3 4 4

Front view / Pohled zepředu / Pogled od spredaj / Vorderansicht

Back view / Pohled zezadu / Pogled od zadaj / Rückansicht

5 GB

Introduction ............................................................Page 6

Intended use ...............................................................Page 6

Trademark notice ...........................................................Page 6

Scope of delivery ...........................................................Page 6

Parts description ............................................................Page 6

Technical data .............................................................Page 7

Important safety instructions ........................................Page 8

Safety ....................................................................Page 8

Safety instructions for batteries.................................................Page 10

Before use – preparation.............................................Page 10

Prepare the remote control ....................................................Page 11

First-time use ...........................................................Page 11

Replace the remote control battery (Fig. A).......................................Page 11

Placing TV or monitor ........................................................Page 11

Before use – connections .............................................Page 12

Use the HDMI ARC connection ................................................Page 12

Use the OPTICAL connection ..................................................Page 12

COAXIAL socket ............................................................Page 13

Use the AUX connection......................................................Page 13

Connection to power socket ...................................................Page 14

Using the product......................................................Page 14

Standby / ON .............................................................Page 14

Select modes ..............................................................Page 14

Adjust the volume / Mute volume...............................................Page 15

Select the Equaliser..........................................................Page 15

AUX 1 / AUX 2 / HDMI ARC / OPTICAL / COAXIAL operation ...Page 15

Bluetooth

®

operation..................................................Page 15

Pair Bluetooth

®

-enabled devices ................................................Page 15

Listen to music from Bluetooth

®

device ...........................................Page 16

USB operation..........................................................Page 17

Charging other devices via USB port ............................................Page 17

Troubleshooting........................................................Page 17

Glossary ..................................................................Page 18

Cleaning and storing ..................................................Page 18

Disposal.................................................................Page 18

Simplified EU declaration of conformity ...........................Page 19

Warranty ...............................................................Page 19

6 GB

TV STEREO SOUND BASE

 Introduction

We congratulate you on the purchase of your

new product. You have chosen a high quality

product. The instructions for use are part of the

product. They contain important information

concerning safety, use and disposal. Before using

the product, please familiarise yourself with all

of the safety information and instructions for use.

Only use the product as described and for the

speciﬁed applications. If you pass the product on

to anyone else, please ensure that you also pass

on all the documentation with it.

Note: The soundbase is mainly referred as “the

product” in this manual.

 Intended use

This is a consumer electronics product. The

soundbase is intended for playing sound from

audio devices. The product must only be used

indoors. The product is designed for private use,

and must not be used for commercial purposes.

Any other use is considered improper. Any

claims resulting from improper use or due to

unauthorised modiﬁcation of the product will be

considered un warranted. Any such use is at your

own risk.

 Trademark notice

- USB

®

is a registered trademark of USB

Implementers Forum, Inc.

- The Bluetooth

word mark and

logos are registered trademarks of

Bluetooth

SIG, Inc. and any use of such

marks by OWIM GmbH & Co. KG is under

license.

- The SilverCrest trademark and trade name is

the property of their respective owners.

Any other names and products may be

trademarks or registered trademarks of their

respective owners.

 Scope of delivery

Immediately after unpacking, please check

the package contents for completeness and

if the product and all parts are in good

condition.

Remove all parts from the packaging. Remove

the packaging material completely.

1 Remote control

(included CR2025 3 V battery inserted)

1 AC power cord

1 Cinch to 3.5 mm jack plug cable

1 HDMI ARC cable

1 Instructions for use

The design is subject to change without notice.

 Parts description

Soundbase (main unit)

1

button (switch the product between ON

and STANDBY mode)

2

button (select the source)

3

EQ button (select a preset sound eﬀect)

4

VOL+ / VOL

–

buttons (increase / decrease

the volume level)

5

Remote control sensor

6

POWER indicator (light up red when the

product is in STANDBY mode)

7

AUX1 / AUX2 indicator

(orange indicator lights up: In AUX1 mode /

orange indicator ﬂashes: In AUX2 mode)

8

Bluetooth

®

indicator (blue indicator lights up:

in Bluetooth

®

mode)

9

OPTICAL / COAXIAL indicator

(orange indicator lights up: In OPTICAL

mode / orange indicator ﬂashes: In COAXIAL

mode)

10

HDMI ARC / USB indicator (orange indicator

lights up: In HDMI ARC mode / orange

indicator ﬂashes: In USB mode)

11

I/O switch (POWER ON/OFF)

7 GB

12

Power socket

13

COAXIAL socket

14

OPTICAL socket

15

USB socket

16

AUX 1 / AUX 2 input

17

HDMI ARC socket

Remote control

18

button (switch the product between ON

and STANDBY mode)

19

SOURCE buttons (select the playback source)

20

Playback control buttons

,

Skip to previous track / skip to next track in

Bluetooth

®

mode and USB mode.

/ PAIR

(Play / pause / resume playback in

Bluetooth

®

mode and USB mode.

Press and hold this button to activate the

pairing function in Bluetooth

®

mode and

disconnect the existing paired Bluetooth

®

device)

VOL+ / VOL–

(Increase / decrease the volume level)

21

MUTE (mute or resume the sound)

22

EQ buttons (select a preset sound eﬀect)

(NIGHT MODE & BASS ON/OFF button:

Press and hold the TV key to activate the night

mode. Press and hold the SONG key to set

the bass OFF. Press and hold the SONG key

again to set the bass ON)

23

Battery tray

 Technical data

Protection class of the

product:

/ II

Standby power

consumption: < 0.5 W

USB audio format

support: MP3

Range: up to 10 m

Inputs: - AUX IN 1/2

2 x 3.5 mm stereo jack

socket

- HDMI (ARC) 1 x

HDMI ARC socket

- OPTICAL IN

1 x optical input

- COAXIAL IN:

1 x COAXIAL IN

- USB: 1 x USB socket

Input signal

(coxial / optical): PCM 2.0

Operating conditions: 10 °C – 40 °C,

40 % – 85 %

relative humidity

Storage temperature: –20 °C to + 60 °C

Operating voltage /

frequency:

220 – 240 V

~

(alternating current)

50/60 Hz

Maximal power

consumption: 30 W

Output power RMS: 15 W x 2 + 30 W

USB socket: 5 V

(direct current),

max. 500 mA

Total harmonic

distortion: 1 % (1 kHz, 1 W)

Audio input sensitivity

(analogue input): 500 mV

Frequency response: 40 Hz – 20 kHz

Dimension: approx. 525 x 76 x

303 mm (W x H x D)

Weight: approx. 3.6 kg

Bluetooth

®

Wireless standard: Bluetooth

®

V4.2

Range: approx. 10 m

Frequency band: 2402 MHz –

2480 MHz

Max. transmitted

power: <20 dBm

Infrared remote control

Range: 6 m

Angle: 30°

Battery type: CR2025

8 GB

Important safety

instructions

The lightning ﬂash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage”

within the product’s enclosure that may

be of suﬃcient magnitude as to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

 Safety

PLEASE FAMILIARISE YOURSELF WITH ALL

INSTRUCTIONS FOR USE AND SAFETY

NOTICES BEFORE USING THE PRODUCT

FOR THE FIRST TIME. KEEP ALL THE SAFETY

ADVICE AND INSTRUCTIONS IN A SAFE

PLACE FOR FUTURE REFERENCE!

READ THIS MANUAL – Before using the

product, familiarise yourself with all of the

safety information and instructions for use.

KEEP THIS MANUAL IN A SAFE

PLACE – Keep all safety instructions and

operating instructions for future reference.

HEED ALL WARNINGS – All warnings

on the appliance and in the operating

instructions should be adhered to.

FOLLOW ALL INSTRUCTIONS – All

operating and usage instructions should be

followed.

DO NOT USE THIS APPARATUS NEAR

WATER – The appliance should not be used

near water or moisture – for example, in a

wet basement or near a swimming pool and

the like.

Clean only with a dry cloth.

Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as

radiators, heaters, stoves, or other apparatus

(including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the

polarized or grounding plug. A polarized

plug has two blades with one wider than the

other. A grounding plug has two blades and

a third grounding prong. The wide blade or

the third prong is provided for your safety. If

the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

Only use attachments / accessories speciﬁed

by the manufacturer.

Unplug the apparatus during lightning storms

or when unused for long periods of time.

Refer all servicing to qualiﬁed personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the product has been exposed to

rain or moisture, does not operate normally,

or has been dropped.

This equipment is a Class II or double

insulated electrical appliance. It has been

designed in such a way that it does not

require a safety connection to electrical earth.

The apparatus shall not be exposed to

dripping or splashing. No objects ﬁlled with

liquids, such as vases, shall be placed on the

apparatus.

Minimum distance around the apparatus for

suﬃcient ventilation is 5 cm.

9 GB

The ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers,table-cloths, curtains,

etc…

No naked ﬂame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION

Use of controls or adjustments or performance

of procedures other than those described

herein, may result in hazardous radiation

exposure or other unsafe operation.

To reduce the risk of ﬁre or electric shock, do

not expose this apparatus to rain or moisture.

The apparatus must not be exposed to

dripping or splashing and objects ﬁlled with

liquids, such as vases, must not be placed on

apparatus.

The mains plug / appliance coupler is used

as the disconnect device, the disconnect

device must remain readily operable.

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

WARNING!

Before operating this system, check the

voltage of this system to see if it is identical to

the voltage of your local power supply.

Do not place this product close to strong

magnetic ﬁelds.

Do not place this product on the ampliﬁer or

receiver.

If any solid object or liquid falls into the

system, unplug the system and have it

checked by qualiﬁed personnel before

operating it any further.

Do not attempt to clean the product with

chemical solvents as this may damage the

ﬁnish. Use a clean, dry or slightly damp cloth.

When removing the power plug from the wall

outlet, always pull directly on the plug, never

yank on the cord.

Changes or modiﬁcations to this product not

expressly approved by the party responsible

for compliance will void the user’s authority to

operate the equipment.

DANGER

RADIO INTERFACE

Switch the product oﬀ on airplanes, in hospitals,

service rooms, or near medical electronic systems.

The wireless signals transmitted could impact

the functionality of sensitive electronics. Keep

the product at least 20 cm from pacemakers

or implantable cardioverter deﬁbrillators, as

the electromagnetic radiation may impair the

functionality of pacemakers. The radio waves

transmitted could cause interference in hearing

aids. Do not place the product near ﬂammable

gasses or potentially explosives areas (e. g.

paint shops) with the wireless components on, as

the radio waves emitted can cause explosions

and ﬁre. The range of the radio waves varies

by environmental conditions. In the event of

wireless data transmission, unauthorised third

parties receiving the data cannot be excluded.

OWIM GmbH & Co KG is not responsible

for interference with radios or televisions due

to unauthorised modiﬁcation of the product.

OWIM GmbH & Co KG further assumes no

liability for using or replacing cables and products

not distributed by OWIM. The user of the product

is fully responsible for correcting interference

caused by such unauthorised modiﬁcation of the

product, as well as replacement of such products.

In order to avoid damage to your

hearing, do not listen to music at high

volumes over an extended period of

time.

10 GB

Safety instructions for

batteries

DANGER TO LIFE! Keep batteries out of

reach of children. If accidentally swallowed

seek immediate medical attention.

DANGER OF EXPLOSION!

Never recharge non-rechargeable

batteries. Do not short-circuit

batteries and / or open them. Overheating,

ﬁre or bursting can be the result.

Never throw batteries into ﬁre or water.

Do not exert mechanical loads to batteries.

Do not ingest the battery. Chemical burn

hazard.

The remote control supplied with this product

contains a coin / button cell battery. If the

coin / button cell battery is swallowed, it can

cause internal burns in just 2 hours and can

lead to death.

Risk of leakage of batteries

Avoid extreme environmental conditions and

temperatures, which could aﬀect batteries,

e. g. radiators / direct sunlight.

Avoid contact with the skin, eyes and mucous

membranes. In the event of contact with

battery acid, thoroughly ﬂush the aﬀected

area with plenty of clean water and seek

immediate medical attention.

WEAR PROTECTIVE GLOVES!

Leaked or damaged batteries can

cause burns on contact with the

skin. Wear suitable protective gloves at all

times if such an event occurs.

In the event of a leakage of the battery,

immediately remove it from the product to

prevent damage.

Only use the same type of batteries.

Remove battery if the product will not be used

for a longer period.

WARNING

Do not ingest the battery, chemical burn

hazard.

The remote control supplied with the product

contains a coin / button cell battery. If the

coin / button cell battery is swallowed, it can

cause severe internal burns in just 2 hours and

can lead to death.

Keep new and used batteries away from

children.

If the battery compartment does not close

securely, stop using the product and keep it

away from children.

If you think batteries might have been

swallowed or placed inside any part of the

body, seek immediate medical attention.

Risk of damage of the product

Only use the speciﬁed type of battery!

Insert battery according to polarity marks (+)

and (–) on the battery and the product.

Clean the contacts on the battery and in the

battery compartment before inserting!

Remove exhausted battery from the product

immediately.

 Before use – preparation

Note: Remove all packaging material from the

product.

CAUTION! Make sure that the product and

the devices to be connected are switched oﬀ

before you connect them. Please also read

the user instructions for the devices which you

are connecting.

11 GB

 Prepare the remote control

The provided remote control allows the product to

be operated from a distance.

Even if the remote control is operated within

the eﬀective range (6 m), remote control

operation may be impossible if there are

any obstacles between the product and the

remote control.

If the remote control is operated near other

products which generate infrared rays, or if

other remote control devices using infra-

red rays are used near the product, it may

operate incorrectly. Conversely, the other

products may operate incorrectly.

 First-time use

The remote control has a pre-installed lithium

CR2025 battery. Remove the protective tab to

activate the remote control battery.

 Replace the remote control

battery (Fig. A)

Pull out the battery tray

23

and remove the

old battery.

Place a new CR2025 battery into the battery

tray

23

with correct polarity (+/–) as

indicated.

Insert the battery tray

23

back into the slot.

DANGER OF EXPLOSION! If

the battery is not correctly

replaced. Replace only with the

same or an equivalent type.

WARNING! Ensure the correct polarity of

the battery. The plus symbol on the battery

must be visible (see ﬁg. A).

 Placing TV or monitor

Note: Ensure the TV is positioned properly.

Turning the volume up too loud may cause the TV

to vibrate and fall over.

This product is designed for use with TVs

and similar display devices up to a maximum

dimension of the base stand of 48 cm (W) x

22 cm (D) and within a maximum load of

35 kg. The base stand shall spread the

weight across a reasonably wide area of the

product.

The soundbase is NOT suitable for use with

heavy display devices that use narrow legs

instead of a large base stand, as these type

of feet may concentrate excessive force onto

the soundbase.

Place the device on a level and stable

surface.

Note: Furniture cleaning products may aﬀect

the soundbase’s rubber stands. If in doubt,

use a pad. Use a mat if in doubt.

Decide where to place the product.

Always make sure that …

- there is a wall socket nearby;

- there is enough space above, in case you

want to place a television set on the device;

- a television set and any other devices

(e. g. set-top box, DVD player) can be set

up nearby, in case you do not want / are

unable to place them on the device.

Connect the source device(s). Always ensure

that all devices are securely positioned.

12 GB

 Before use – connections

 Use the HDMI ARC connection

HDMI (ARC)

TV

Preparation

Refer to the owner’s manual of your TV set.

An ARC-capable HDMI cable is part of the

delivery scope of this product.

The ARC (Audio Return Channel) function allows

you to send audio from your ARC- compliant TV to

your product through a single HDMI connection.

To enjoy the ARC function, please ensure your TV

is both HDMI-CEC and ARC compliant and set up

accordingly. When correctly set up, you can use

your TV remote control to adjust the volume output

(VOL +/– and MUTE) of the product.

Ensure to use HDMI cables that can support

the ARC function.

HDMI-CEC will be called diﬀerent names

by diﬀerent manufacturers – please refer to

your owner’s manual for details on setting up

HDMI-CEC and ARC.

Connect the HDMI cable from product’s

HDMI (ARC) socket

17

to the HDMI (ARC)

socket on your ARC compliant TV. Then press

the remote control to select HDMI ARC.

 Use the OPTICAL connection

TV

Use an optical cable (not included) to connect the TV’s optical output socket to the product’s

OPTICAL socket

14

.

13 GB

 COAXIAL socket

TV

You also can use the COAXIAL cable (not included) to connect the TV’s COAXIAL OUT socket and

COAXIAL socket

13

on the product.

 Use the AUX sockets

A Use a 3.5 mm jack plug cable (not included) to connect an external audio device or TV’s

headphone socket to the AUX (1 or 2) input socket

16

on the product.

B Use a 3.5 mm to RCA audio cable (included) to connect the TV’s audio output (R/L) sockets to the

AUX (1 or 2) input socket

16

on the product.

Tip: Set the playback device (e.g. television set) to a higher volume and the soundbase to a lower

volume. This way the automatic switch oﬀ of the sound base can be avoided.

14 GB

 Connection to power socket

Attention! Risk of product damage!

Ensure that the power supply voltage

corresponds to the voltage printed on the

back of the product.

Connect the AC power cord to the power

socket

12

on the product and a wall outlet.

Notes:

Ensure all connections are connected before

connecting to the mains power socket.

Be sure to unplug the power cord from the

outlet when the system is not in use for an

extended period of time.

 Using the product

 Standby / ON

After connecting the soundbase to a wall

outlet, switch the product on using the I/O

switch

11

. The soundbase is in standby mode

now, as indicated by the red LED display.

Press the button

1

/

18

on the main

device or on the remote control to switch the

main unit ON.

Press the button

1

/

18

again to switch

the product back to standby mode. The LED

display lights up red.

Disconnect the mains plug from the wall

socket or switch the I/O switch

11

on the

rear of the product to switch the product oﬀ

completely.

Note:

When turning the product on again, it will

continue with the same mode that was used

prior to turning oﬀ the product last time.

If the product is idle for over 15 minutes, the

product will automatically switch to Standby

mode.

 Select modes

Press the button

2

repeatedly on the product

or press the AUX1, AUX2, BT (Bluetooth

®

),

OPTICAL, COAXIAL, HDMI ARC, USB buttons on

the remote control to select the desired mode.

Indicator Mode

1 Red

Standby

2 Orange / ﬂash

AUX1 / AUX2

3 Blue

BLUETOOTH

®

4 Orange / ﬂash

OPTICAL /

COAXIAL

5 Orange / ﬂash

HDMI ARC / USB

15 GB

 Adjust the volume / Mute

volume

Press the VOL +/– buttons

4

/

20

to adjust

the volume.

While adjusting the volume, the

corresponding operation LED (

7

,

8

,

9

or

10

) ﬂashes quickly.

If you wish to turn the sound oﬀ, press the

MUTE button

21

on the remote control. Press

the MUTE button

21

again or press VOL +/–

buttons

4

/

20

to resume normal listening.

While the mute function is active, the

corresponding operation LED (

7

,

8

,

9

or

10

) is blinking once per second.

While the volume level reaches its maximum

level, if you press the VOL + button

4

/

20

again, the corresponding operation LED

ﬂashes slowly 3 times.

While the volume level reaches its minimum

level, if you press the VOL – button

4

/

20

again, the corresponding operation LED

ﬂashes slowly 3 times.

 Select the Equaliser

While playing, press the EQ button

3

/

22

repeatedly on the product or press the FLAT,

TV, CINEMA, SONG buttons on the remote

control to select preset equalisers.

 AUX 1 / AUX 2 / HDMI ARC /

OPTICAL / COAXIAL operation

Via the ARC channel of the HDMI cable, digital

audio signals can be transmitted from the source

device (e. g. television set) to the soundbase.

The audio transmission via the HDMI (ARC)

socket

17

can only work if all components are

ARC-enabled.

Set the product to standby mode with the I/O

switch

11

. Press the standby button

1

/

18

to switch on the product.

By pressing the HDMI (ARC) button

19

,

select the HDMI input.

Switch on the television set. When the

connection is established for the ﬁrst time, it

may take several seconds until sound is output

from the soundbase

Ensure that the product is connected to the TV

or audio device.

Press the button

2

repeatedly on the

product or press the AUX1, AUX2, HDMI

ARC, OPTICAL, COAXIAL buttons on the

remote control to select the desired mode.

Operate your audio device directly for

playback features.

Press the VOL +/– button

4

/

20

to adjust

the volume to your desired level.

Tip: While in HDMI ARC / OPTICAL / COAXIAL

mode, if there’s no sound output and the status

indicator is ﬂashing, you may need to activate

PCM output on your source device (eg. TV, DVD

or Blu-ray player).

 Bluetooth operation

Audio ﬁles from a portable audio device can

also be played via the Bluetooth

®

interface of the

product.

 Pair Bluetooth

®

-enabled

devices

Notes:

- The operational range between the main unit

and a Bluetooth

®

device is approximately

10 metres.

- Refer to the Bluetooth

®

device’s instruction

manual.

- Compatibility with all Bluetooth

®

devices is

not guaranteed.

- Any obstacle between this product and a

Bluetooth

®

device can reduce the operational

range.

- Keep this product away from other electronic

devices that may cause interference.

16 GB

To connect your device to the product

via Bluetooth

®

, follow the steps below:

1. During ON mode, press the

button

2

repeatedly on the product or press the

Bluetooth

®

button to select Bluetooth

®

mode. The blue indicator

8

will ﬂash

slowly.

2. If you cannot ﬁnd the product, press and

hold the

/ PAIR button on the remote

control for approx. 2 seconds. The system

has entered pairing mode. You will hear a

signal sound from the product and the blue

indicator

8

will ﬂash fast.

Activate your Bluetooth

®

device and select

the search mode. “SBS 60 B2” will

appear on your Bluetooth

®

device.

3. Select “SBS 60 B2” in the pairing list.

After the system is successfully connected,

it says “Paired” and the blue indicator

8

will light up solidly.

4. Play music from the connected device.

To disconnect the Bluetooth

®

function,

you can:

Switch to another function on the product.

Disable the function from your Bluetooth

®

device. The Bluetooth

®

device will be

disconnected from the product after it says

“Disconnected”.

Press and hold the / PAIR button on the

remote control.

Tips:

Enter “0000” for the password if necessary.

If there is an existing connection, press and

hold the

/ PAIR button on the remote

control to re-activate the pairing mode, the

existing connection will be interrupted, the

blue indicator

8

will ﬂash.

If no other Bluetooth

®

device pairs with this

player within two minutes, the player will

recover its previous connection.

The player will also be disconnected when

your device is moved beyond the operational

range approx. 10 metres.

If you want to reconnect your device to this

player, place it within the operational range.

If the device is moved beyond the operational

range, when it is brought back, please check

if the device is still connected to the player.

If the connection is lost, follow the instructions

above to pair your device to the player again.

 Listen to music from Bluetooth

®

device

If the connected Bluetooth

®

device supports

Advanced Audio Distribution Proﬁle (A2DP),

you can listen to the music stored on the

device through the player.

If your audio player supports Audio Video

Remote Control Proﬁle (AVRCP), you can

control the basic functions of the audioplayer

with the soundbase’s remote control.

1. Pair your device with the player.

2. Play music via your device (if it supports

A2DP).

3. Use supplied remote control to control play

(if it supports AVRCP).

-

To pause / resume play, press the

/ PAIR button.

-

To skip to a track, press the ,

buttons.

17 GB

Note: Usually, audio devices remember the

identiﬁcation of the device. In this case, it may not

be necessary to establish the connection manually

again if the Bluetooth

®

function is activated.

 USB operation

Plug the USB device into the USB socket

15

.

Press the button

2

on the product

repeatedly or press the USB button on the

remote control to select USB mode. The

light

10

is ﬂashing in orange.

This USB port can read MP3 ﬁle.

During playback:

-

To pause or resume play, press the /

PAIR button on the remote control.

-

To skip to the previous / next ﬁle, press the

, buttons on the remote control.

-

Press and hold the , buttons on the

remote control to perform fast forward /

reverse playback. Release the button to

resume normal playback.

 Charging other devices via

USB port

This USB port charge other devices, if those

devices have charging function.

 Troubleshooting

To keep the warranty valid, never try to repair the

system yourself. If you encounter problems when

using this product, check the following points

before requesting service.

= Fault

= Action

No function / no display

Ensure the mains cable is connected securely.

Make sure that the product is switched on.

The remote control does not function

Use the remote control near the product.

Point the remote control at the remote control

sensor

5

on the product.

Replace the battery in the remote control with

a new one.

Remove any obstacles between the remote

control and the product.

Loud hum or noise is heard

Check if audio in plugs are well connected

The product does not respond when

pressing any buttons

An electrostatic discharge has occurred,

which blocks the soundbase. Switch oﬀ the

soundbase on the main switch

11

for approx.

5 seconds and then switch it on again. You

can use the soundbase as usual now.

No sound output

Make sure that the product is not

muted. Press the MUTE button

21

or the

VOL +/– button

4

/

20

to resume normal

listening.

Ensure the audio setting of the input source

(e. g. TV, game console, DVD player, etc.) is

set to PCM mode.

18 GB

The sound output eﬀect sounds

unfamiliar

Press the EQ button on the product

repeatedly or press the FLAT, TV, CINEMA,

SONG buttons on the remote control to select

preset EQ mode for the optimal sound output

eﬀect.

I can’t ﬁnd the Bluetooth

®

name of

this product on my Bluetooth

®

device

for Bluetooth

®

pairing

Ensure that the product is switch on.

Ensure that the Bluetooth

®

function is activated

on your Bluetooth

®

device.

The product has a Bluetooth

®

function that

can receive a signal within 10 metres. Keep a

distance within 10 metres between.

Audio transmission via the HDMI

(ARC) socket fails

Audio transmission via the HDMI (ARC)

socket

17

can only work if all components

are ARC-enabled. If the transmission is

unsuccessful, you must take one or possibly

several of the following items into account:

The old HDMI cable must be replaced with a

new ARC-enabled cable.

Not every HDMI socket on the television

set needs to support ARC. In this case, the

HDMI cable on the television set must be

connected to another ARC-enabled HDMI

socket. Usually, the respective HDMI sockets

are labelled with ARC. If not, refer to the user

instructions of your television set.

For several television sets, the digital audio

output must be activated. Select the audio

output PCM 2.0 (PCM stereo).

When using analogue AUX input, the sound

base automatically switches to standby mode

after approx. 15 minutes. This may happen due

to a low input level. In this case set the playback

device (e.g. television) to higher volume and

reduce the volume at the sound base.

 Glossary

HDMI stands for High Deﬁnition Multimedia

Interface. Via this transmission route, digital

images and audio signals can be transmitted.

HDMI ARC (ARC – Audio Return Channel)

means that the cable is provided with an ARC

channel. Via this channel, audio signals are

transmitted in both directions.

The following modern devices are usually

provided with an ARC output: television sets,

games consoles or digital receivers.

 Cleaning and storing

DANGER! RISK OF ELECTRIC

SHOCK!

Pull the power unit out of the wall

socket before you clean the product. Make

sure that no liquid gets into the product.

Clean the product with a slightly damp cloth.

In case of persistent contamination, you can

also use a slightly more gentle cleaner such

as detergent. Solvents, spirits, thinners etc.

must not be used, as they can damage the

surface of the product.

When not using the product, store it in a

place where neither high temperatures nor

moisture can aﬀect it. Remove the battery

from the remote control.

 Disposal

The packaging is made of

environmentally friendly materials,

which may be disposed of through

your local recycling facilities.

Contact your municipality for information on how

to dispose of your worn-out product.

19 GB

The adjacent symbol of a crossed out

dustbin on wheels indicates this

product is subject to Directive

2012/19/EU. This directive states at the end of

the life this product must not be disposed of

through regular household refuse but must be

returned to special collection sites, recycling

depots or waste management companies.

This disposal is free of charge to you. Protect

the environment and dispose properly. Please

contact your local waste management company

or the city / municipal administration for more

information.

Think about the environment and your personal

health. Dispose empty batteries in separate

collecting boxes. These can be found in many

public buildings or in shops where batteries are

sold.

Improper disposal of batteries

can harm the environment!

Never dispose of batteries in your household

waste. They may contain toxic heavy metals

and are subject to hazardous waste regulations.

The chemical symbols of the heavy metals

are: Cd = cadmium, Hg = mercury, Pb = lead.

Therefore dispose of used batteries through your

local

collection site.

 Simpliﬁed EU declaration

of conformity

Hereby, OWIM GmbH & Co. KG,

Stiftsbergstraße 1, DE-74167 Neckarsulm,

GERMANY, declares that the product

TV-STEREO-SOUNDBASE HG02955 is in

compliance with Directives 2014/53/EU,

2011/65/EU and 2009/125/EC.

The full text of the EU declaration of conformity

is available at the following internet address:

www.owim.com

 Warranty

The product has been manufactured to strict

quality guidelines and meticulously examined

before delivery. In the event of product defects

you have legal rights against the retailer of this

product. Your legal rights are not limited in any

way by our warranty detailed below.

The warranty for this product is 3 years from the

date of purchase. Should this product show any

fault in materials or manufacture within 3 years

from the date of purchase, we will repair or

replace it – at our choice – free of charge to you.

The warranty period begins on the date of

purchase. Please keep the original sales receipt

in a safe location. This document is required as

your proof of purchase. This warranty becomes

void if the product has been damaged, or used or

maintained improperly.

The warranty applies to defects in material

or manufacture. This warranty does not cover

product parts subject to normal wear, thus

possibly considered consumables (e. g. batteries)

or for damage to fragile parts, e. g. switches,

rechargeable batteries or glass parts.

Stránka sa načítava ...

Silvercrest SBS 60 B2 Operation and Safety Notes

Silvercrest SBS 60 B2 Operation and Safety Notes

V iných jazykoch

Súvisiace články

Ďalšie dokumenty