Microlife BP W1 Basic Používateľská príručka

Microlife BP W1 Basic

IB BP W1 Basic E-V10 2223

Revision Date: 2023-05-05

Microlife Corporation

9F, 431, RuiGuang Road, NeiHu

Taipei 11492, Taiwan, China

www.microlife.com

Microlife UAB

P. Lukšio g. 32

08222 Vilnius

Lithuania

EN

RU

BG

RO

CZ

SK

SL

SR

HU

HR

1

14

30

46

60

73

87

100

113

127

Microlife BP W1 Basic

18

2

5

6

1

15

11

14

17 16 13 12

10

7

8

9

3

4

BP W1 BasicGuarantee Card

Name of Purchaser / Ф.И.О. покупателя / Име на купувача /

Numele cumpărătorului / Jméno kupujícího / Meno zákazníka / Ime

in priimek kupca / Ime i prezime kupca / Vásárló neve /

Ime i prezime kupca

Serial Number / Серийный номер / Сериен номер / Număr de

serie / Výrobní číslo / Výrobné číslo / Serijska števika / Serijski broj /

Sorozatszám / Serijski broj

Date of Purchase / Дата покупки / Дата на закупуване / Data

cumpărării / Datum nákupu / Dátum kúpy / Datum nakupa / Datum

kupovine / Vásárlás dátuma / Datum kupovine

Specialist Dealer / Специализированный дилер /

Специалист

дистрибутор / Distribuitor de spe-cialitate / Specializovaný dealer /

Špecializovaný predajca / Spezializirani trgovec / Ovlašćeni diler /

Forgalmazó / Ovlašteni prodavač

1Microlife BP W1 Basic EN

Display

Microlife BP W1 Basic EN

1ON/OFF button

2Display

3Battery compartment

4Cuff

5M-button (memory)

6Time button

7Systolic value

8Diastolic value

9Pulse rate

AT Date/Time

AK Traffic light indicator

AL Stored value

AM Irregular heartbeat (IHB) symbol

AN Pulse indicator

AO Battery display

AP Arm movement indicator

AQ Cuff check indicator

AR LED positioning indicator

Read the important information in these

instructions for use before using this device.

Follow the instructions for use for your safety

and keep it for future reference.

Type BF applied part

Manufacturer

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Reference number

Serial number

(YYYY-MM-DD-SSSSS;

year-month-day-serial number)

S

N

2

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

It is simple to use, accurate and comes highly recommended for

blood pressure monitoring in your home.

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical

device for taking measurements on the wrist. This device was devel-

oped in collaboration with physicians and clinical tests prove its

measurement accuracy to be very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer

or pharmacy will be able to give you the address of the

Microlife dealer in your country. Alternatively, visit the internet at

www.microlife.com where you will find a wealth of invaluable

information on our products.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol.

Table of contents

1. Important facts about blood pressure

How do I evaluate my blood pressure

2. Using the device for the first time

Inserting the batteries

Setting the date and time

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

4. Appearance of the irregular heartbeat (IHB) symbol

Caution

Humidity limitation

Temperature limitation

Medical device

Protected against vertically falling water

drops when enclosure tilted up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W1 Basic EN

5. Traffic light indicator in the display

6. Data memory

Viewing the stored values

Memory full

Clearing all values

How not to store a reading

7. Battery indicator and battery change

Low battery

Flat battery - replacement

Which batteries and which procedure?

Using rechargeable batteries

8. Error Messages

9. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

10. Guarantee

11. Technical Specifications

1. Important facts about blood pressure

Blood pressure is the pressure of the blood flowing in the

arteries generated by the pumping of the heart. Two values, the

systolic (upper) value and the diastolic (lower) value, are

always measured.

The device indicates the pulse rate (the number of times the

heart beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell them if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating

/ in the evening: before going to bed, bathing or taking medica-

tion) and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

4

Deviations between measurements taken by your doctor or in

the pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Leave a small break of > 5 minutes between two measurements.

If you suffer from an irregular heartbeat (arrhythmia, see Section

«Appearance of the irregular heartbeat (IHB) symbol»), measure-

ments taken with this device should be evaluated with your

doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

How do I evaluate my blood pressure

Table for classifying home blood pressure values in adults in

accordance with the international Guidelines (ESH, ESC, JSH).

Data in mmHg.

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may

differ from the measurement taken on the upper arm. We

therefore advise you to compare these values with those

produced by the upper arm measurement and discuss them

with your doctor.

Range Systolic Diastolic Recommendation

1. blood pressure

normal < 120 < 74 Self-check

2. blood pressure

normal 120 - 129 74 - 79 Self-check

3. blood pressure

slightly high 130 - 134 80 - 84 Consult your doctor

4. blood pressure

too high 135 - 159 85 - 99 Seek medical advice

5. blood pressure

far too high ≥ 160 ≥ 100 Seek medical advice

5Microlife BP W1 Basic EN

2. Using the device for the first time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment 3 is at the top of the device. Insert the

batteries (2 x 1.5 V, size AAA), thereby observing the indicated

polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button for approx. 3 seconds until the year number starts to flash.

Now you can enter the new values as described above.

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

your feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in

the pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference according to the information in the «Technical

Specifications».

7. Press the ON/OFF button 1 to start the measurement.

8. The LED Positioning Indicator AR is activated. Support your arm

in a relaxed position with the device at the same height as your

heart, move your arm until the LED light is at its brightest and

appears to be in the center of the indicator.

9. After 5-8 seconds, the cuff will pump up automatically. Relax, do

not move and do not tense your arm muscles until the measure-

ment result is displayed. Breathe normally and do not talk.

6

10.The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

11.During the measurement, the pulse indicator AN flashes in the

display.

12.The result, comprising the systolic 7 and the diastolic 8 blood

pressure and the pulse rate 9 are displayed. Note also the

explanations on further display symbols in this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

4. Appearance of the irregular heartbeat (IHB) symbol

This symbol AM indicates that an irregular heartbeat was detected.

In this case, the measured blood pressure may deviate from your

actual blood pressure values. It is recommended to repeat the

measurement.

5. Traffic light indicator in the display

The bars on the left-hand edge of the display AK show you the range

within which the indicated blood pressure value lies. Depending on

the height of the bar, the readout value is either within the optimum

(green), elevated (yellow), too high (orange) or dangerously high

(red) range. The classification corresponds to the 4 ranges in the

table as defined by the international guidelines (ESH, ESC, JSH), as

described in «Section 1.».

6. Data memory

At the end of each measurement, this device automatically stores

the result, including date and time.

Viewing the stored values

Press the M-button 5 briefly, when the device is switched off. The

display first shows «M» AL and then a value, e.g. «M 17». This

You can stop the measurement at any time by pressing the

ON/OFF button or open the cuff (e.g. if you feel uneasy or an

unpleasant pressure sensation).

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

7Microlife BP W1 Basic EN

means that there are 17 values in the memory. The device then

switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Memory full

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been

switched off beforehand) until «CL» appears and then release the

button. To permanently clear the memory, press the M-button while

«CL» is flashing. Individual values cannot be cleared.

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1 until «M» AL is flashing. Confirm to delete the reading by

pressing the M-button 5.

7. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

AO will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably,

you should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3 by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in Section

«2. Using the device for the first time».

Which batteries and which procedure?

Pay attention that the maximum memory capacity of 30

memories per user is not exceeded. When the 30 memory is

full, the oldest value is automatically overwritten with the

31th value. Values should be evaluated by a doctor before

the memory capacity is reached – otherwise data will be lost.

The memory retains all values although date and time must

be reset – the year number therefore flashes automatically

after the batteries are replaced.

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

8

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

8. Error Messages

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

Error Description Potential cause and remedy

«ERR 1» Signal too

weak The pulse signals on the cuff are too

weak. Re-position the cuff and repeat the

measurement.*

«ERR 2»

AP

Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle

tension. Repeat the measurement,

keeping your arm still.

«ERR 3»

AQ

No pressure

in the cuff An adequate pressure cannot be gener-

ated in the cuff. A leak may have

occurred. Check that the cuff is correctly

connected and is not too loose. Replace

the batteries if necessary. Repeat the

measurement.

«ERR 5» Abnormal

result The measuring signals are inaccurate

and no result can therefore be displayed.

Read through the checklist for taking a

reliable measurement and then repeat

the measurement.*

9Microlife BP W1 Basic EN

9. Safety, care, accuracy test and disposal

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use this device if you think it is damaged or notice anything

unusual.

Never open this device.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

The measurement results given by this device is not a diagnosis.

It is not replacing the need for the consultation of a physician,

especially if not matching the patient’s symptoms. Do not rely on

the measurement result only, always consider other potentially

occurring symptoms and the patient’s feedback. Calling a doctor

or an ambulance is advised if needed.

Do not use this device if the patient’s condition meets the following

contra-indications, to avoid inaccurate measurements or injuries.

The device is not intended for measuring blood pressure in pedi-

atric patients of age younger than 12 years old (children, infant,

or neonates).

«HI» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high

(over 200 beats per minute). Relax for 5

minutes and repeat the measurement.*

«LO» Pulse too

low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

Safety and protection

Error Description Potential cause and remedy

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed. Be aware of

the risk of strangulation in case this device is supplied with

cables or tubes.

Contra-indications

10

Presence of significant cardiac arrhythmia during measurement

may interfere with blood pressure measurement and affect the

reliability of blood pressure readings. Consult with your doctor

about whether the device is suitable for use in this case.

The device measures blood pressure using a pressured cuff. If

the measuring limb suffers from injuries (for example open

wounds) or under conditions or treatments (for example intrave-

nous drip) making it unsuitable for surface contact or pressuriza-

tion, do not use the device, to avoid worsening of the injuries or

conditions.

Patient motions during measurement may interfere with the

measurement process and influence results.

Avoid taking measurements of patients with conditions, diseases,

and susceptible to environment conditions that lead to incontrol-

lable motions (e.g. trembling or shivering) and inability to commu-

nicate clearly (for example children and unconscious patients).

The device uses oscillometric method to determine blood pres-

sure. The arm being measure should have normal perfusion. The

device is not intended to be used on a limb with restricted or

impaired blood circulation. If you suffer with perfusion or blood

disorders, consult your doctor before using the device.

Avoid taking measurement on the arm on the side of a mastec-

tomy or lymph node clearance.

Do not use this device in a moving vehicle (for example in a car

or on an aircraft).

Indicates a potentially hazardous situation, which if not avoided,

could result in death or serious injury.

This device may only be used for the intended uses described in

this Instructions for Use. The manufacturer cannot be held liable

for damage caused by incorrect application.

Do not change the patient medication and treatment based the

result of one or multiple measurements. Treatment and medica-

tion changes should be prescribed only by a medical profes-

sional.

Inspect the device, cuff, and other parts for damage. DO NOT

USE the device, cuff or parts if they appear damaged or operating

abnormally.

Blood flow of the arm is temporarily interrupted during measure-

ment. Extended interruption of blood flow reduces peripheral

circulation and may cause tissue injury. Beware of signs (for

example tissue discoloration) of impeded peripheral circulation if

taking measurements continuously or for an extended period of

time.

WARNING

11Microlife BP W1 Basic EN

Prolonged exposure to cuff pressure will reduce peripheral perfu-

sion and may lead to injury. Avoid situations of extended cuff

pressurization beyond normal measurements. In the case of

abnormally long pressurization, abort the measurement or loose

the cuff to depressurize the cuff.

Do not use this device in oxygen rich environment or near flam-

mable gas.

The device is not water resistant or water proof. Do not spill or

immerse the device in water or other liquids.

Do not dissemble or attempt to service the device, accessory and

parts, during use or in storage. Access to the device internal hard-

ware and software is prohibited. Unauthorized access and

servicing of the device, during use or in storage, may compromise

the safety and performance of the device.

Keep the device away from children and people incapable of

operating the device. Beware of the risks of accidental ingestion

of small parts and of strangulation with the cables and tubes of

this device and accessories.

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury to the user or patient, or cause

damage to the device or other property.

The device is intended only for measuring blood pressure at wrist.

Do not measure other sites because the reading does not reflect

your blood pressure accurately.

After a measurement is completed, loosen the cuff and rest for >

5 minutes to restore limb perfusion, before taking another

measurement.

Do not use this device with other medical electrical (ME) equip-

ment simultaneously. This may cause device malfunction or

measurement inaccuracies.

Do not use this device in proximity of high frequency (HF) surgical

equipment, magnetic resonance imaging (MRI) equipment, and

computerized tomography (CT) scanners. This may cause device

malfunction and measurement inaccuracies.

Use and store the device, cuff and parts in temperature and

humidity conditions specified in the «Technical Specifications».

Usage and storage of the device, cuff and parts in conditions

outside ranges given in the «Technical Specifications» may

results in device malfunction and the safety of usage.

Protect the device and accessories from the following to avoid

damaging the device:

water, other liquids, and moisture

extreme temperatures

impacts and vibrations

CAUTION

12

direct sunlight

contamination and dust

Stop using this device and cuff and consult with your doctor if you

experience skin irritation or discomfort.

Electromagnetic Compatibility Information

This device is compliant with EN60601-1-2: 2015 Electromagnetic

Disturbances standard.

This device is not certified to be used in vicinity of High Frequency

(HF) medical equipment.

Do not use this device close to strong electromagnetic fields and

portable radio frequency communication devices (for example

microwave oven and mobile devices). Keep a minimum distance of

0.3 m from such devices when using this device.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild

detergent.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

10.Guarantee

This device is covered by a 5 year guarantee from the date of

purchase. During this guarantee period, at our discretion, Microlife

will repair or replace the defective product free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

Transport costs and risks of transport.

Damage caused by incorrect application or non-compliance with

the instructions for use.

Damage caused by leaking batteries.

Damage caused by accident or misuse.

Packaging/storage material and instructions for use.

Regular checks and maintenance (calibration).

Accessories and wearing parts: Batteries.

The cuff is covered by a functional guarantee (bladder tightness)

for 2 years.

Should guarantee service be required, please contact the dealer

from where the product was purchased, or your local Microlife

Batteries and electronic devices must be disposed of in

accordance with the locally applicable regulations, not with

domestic waste.

13Microlife BP W1 Basic EN

service. You may contact your local Microlife service through our

website: www.microlife.com/support

Compensation is limited to the value of the product. The guarantee

will be granted if the complete product is returned with the original

invoice. Repair or replacement within guarantee does not prolong or

renew the guarantee period. The legal claims and rights of

consumers are not limited by this guarantee.

11.Technical Specifications

This device complies with the requirements of the Medical Device

Directive 93/42/EEC.

Technical alterations reserved.

Operating

conditions: 10 - 40°C / 50 - 104°F

15 - 90 % relative maximum humidity

Storage conditions: -20 - +55°C / -4 - +131°F

15 - 90 % relative maximum humidity

Weight: 127 g (including batteries)

Dimensions: 131 x 90 x 60.5 mm

Cuff size: 13.5 - 21.5 cm (5.25 - 8.5 inches)

Measuring

procedure: oscillometric, corresponding to Korotkoff

method: Phase I systolic, Phase V diastolic

Measurement range: 20 - 280 mmHg – blood pressure

40 - 199 beats per minute – pulse

Cuff pressure

display range: 0 - 299 mmHg

Resolution: 1 mmHg

Static accuracy: within ± 3 mmHg

Pulse accuracy: ± 5 % of the readout value

Voltage source: 2 x 1.5 V alkaline batteries; size AAA

Battery lifetime: approx. 320 measurements

(using new batteries)

IP Class: IP 22

Reference to

standards: EN 1060-1 /-3 /-4; IEC 60601-1;

IEC 60601-1-2 (EMC); IEC 60601-1-11

Expected service life: Device: 5 years or 10000 measurements,

whichever comes first

Accessories: 2 years or 5000 measure-

ments, whichever comes first

14

Дисплей

Microlife BP W1 Basic RU

1Кнопка ВКЛ/ВЫКЛ

2Дисплей

3Отсек для батарей

4Манжета

5Кнопка M (Память)

6Кнопка Time (Время)

7Систолическое давление

8Диастолическое давление

9Частота пульса

AT Дата/Время

AK Индикатор уровня давления

AL Сохраненное значение

AM Символ IHB - обнаружения нерегулярного сердцебиения

AN Индикатор пульса

AO Индикатор разряда батарей

AP Индикатор движения руки

AQ Индикатор правильности надевания манжеты

AR Светодиодный индикатор положения

Перед использованием этого устройства

прочитайте важную информацию в данной

инструкции по эксплуатации. В целях

безопасности соблюдайте инструкцию по

эксплуатации и сохраните её для

последующего использования.

Изделие типа BF

Производитель

Батарейки и электронные приборы

следует утилизировать в соответствии с

принятыми нормами и не выбрасывать

вместе с бытовыми отходами.

Официальный представитель в

Европейском Сообществе

Номер по каталогу

Серийный номер(ГГГГ-ММ-ДД-ССССС;

год-месяц-день-серийный номер)

S

NN

15Microlife BP W1 Basic RU

Предназначение:

Прибор для измерения артериального давления и частоты

пульса предназначен для неинвазивного измерения артериаль-

ного давления у людей в возрасте 12 лет и старше.

Он прост в использовании, точен и настоятельно рекомендован

для измерения артериального давления в домашних условиях.

Уважаемый покупатель,

Ваш новый тонометр Microlife является надежным медицинским

прибором для выполнения измерений на запястье. Прибор был

разработан в сотрудничестве с врачами, а клинические тесты

подтвердили высокую точность его измерений.*

При возникновении вопросов, проблем или для заказа запасных

частей, пожалуйста, обращайтесь в местный сервисный центр

Microlife. В качестве альтернативы, посетите в Интернете стра-

ницу www.microlife.ru, где Вы сможете найти ряд полезных

сведений по нашему изделию.

Будьте здоровы – Microlife AG!

* Этот прибор протестирован в соответствии с прото-

колом Европейского Общества Гипертонии (ESH).

Оглавление

1. Важная информация об артериальном давлении

Как определить артериальное давление

2. Использование прибора в первый раз

Установка батареек

Установка даты и времени

3. Выполнение измерений артериального давления

Рекомендации для получения надежных результатов изме-

рений

Осторожно

Пределы допустимой влажности

Пределы допустимой температуры

Медицинский прибор

Защита от вертикально падающих капель

воды при наклоне корпуса до 15°.

Храните устройство в месте, недоступном

для детей в возрасте от 0 до 3 лет.

Сертификация СЕ

IP22

16

4. Появление символа - IHB (обнаружение нерегулярного

сердцебиения)

5. Индикатор уровня давления «Светофор»

6. Память

Просмотр сохраненных значений

Заполнение памяти

Удаление всех значений

Как отменить сохранение результата

7. Индикатор разряда батарей и их замена

Батареи почти разряжены

Замена разряженных батарей

Элементы питания и процедура замены

Использование аккумуляторов

8. Сообщения об ошибках

9. Техника безопасности, уход, проверка точности и

утилизация

Уход за прибором

Очистка манжеты

Проверка точности

Утилизация

10. Гарантия

11. Технические характеристики

1. Важная информация об артериальном давлении

Артериальное давление - это давление крови, подаваемой

сердцем в артерии. Всегда измеряются два значения, систо-

лическое (верхнее) давление и диастолическое (нижнее)

давление.

Кроме того, прибор показывает частоту пульса (число ударов

сердца в минуту).

Постоянно повышенное артериальное давление может

нанести ущерб Вашему здоровью, и в этом случае Вам

необходимо обратиться к врачу!

Всегда сообщайте врачу о Вашем давлении и сообщайте

ему/ей, если Вы заметили что-нибудь необычное или

чувствуете неуверенность. Никогда не полагайтесь на

результат однократного измерения артериального

давления.

Существует несколько причин возникновениявысокого

артериального давления. Ваш лечащий врач расскажет о них

более подробно и предложит подходящее лечение.

Ни при каких обстоятельствах не меняйте дозировку

лекарств и не занимайтесь самолечением без консуль-

тации вашего лечащего врача.

В зависимости от физических нагрузок и состояния артери-

альное давление подвержено значительным колебаниям в

17Microlife BP W1 Basic RU

течение дня. Поэтому каждый раз, прежде чем измерять

давление, необходимо обеспечить спокойную обста-

новку и расслабиться! Потребуется не менее двух изме-

рений (утром до еды и приёма лекарств и вечером перед

сном, принятием водных процедур или приёмом лекарств)

для определения среднего значения.

Совершенно нормально, если при двух измерениях подряд

полученные результаты будут отличаться друг от друга.

Расхождения между результатами измерений, получен-

ными врачом или в аптеке, и результатами, полученными в

домашних условиях, также являются вполне нормальными,

поскольку ситуации, в которых проводятся измерения, совер-

шенно различны.

Несколько измерений обеспечивают гораздо более

надежную информацию об артериальном давлении, чем

одно измерение.

Сделайте небольшой перерыв, в > 5 минут между двумя

измерениями.

Если Вы страдаете нарушением сердцебиения (аритмия,

см Раздел «Появление символа - IHB (обнаружение нерегу-

лярного сердцебиения)»), измерения, сделанные с помощью

этого прибора, должны быть оценены Вашим лечащим

врачом.

Показания пульса не пригодны для использования в

качестве контроля частоты кардиостимулятора!

Во время беременности следует тщательно следить за

артериальным давлением, поскольку на протяжении этого

периода оно может существенно меняться!

Как определить артериальное давление

Таблица для классификации значений артериального давления

взрослого человека в соответствии с международными

рекомендациями ESH, ESC, JSH Данные приведены в mmHg

(мм рт.ст.)

При измерении артериального давления на запястье

на точность измерений может влиять ряд факторов.

В некоторых случаях результат может отличаться от

измерений на плече. Рекомендуется сравнить эти

значения с результатами, полученными при измерениях

на плече, и проконсультироваться с врачом.

Диапазон Систол

ическое Диастол

ическое Рекомендация

1. Aртериальное

давление в

норме

< 120 < 74 Самостоятельный

контроль

18

Оценка давления определяется по наивысшему значению.

Например: давление 140/80 mm Hg (мм рт.ст.) и давление 130/

90 mm Hg (мм рт.ст.) оба оцениваются как «артериальное

давление очень высокое».

2. Использование прибора в первый раз

Установка батареек

После того, как Вы вынули прибор из упаковки, прежде всего,

вставьте батареи. Отсек для батарей 3 расположен на

верхней части прибора. Вставьте батареи (2 х тип AAA 1.5В),

соблюдая полярность.

Установка даты и времени

1. После установки новых батарей на дисплее замигает

числовое значение года. Год устанавливается нажатием

кнопки M 5. Для того, чтобы подтвердить введенное

значение и затем установить месяц, нажмите кнопку Time

(Время) 6.

2. Теперь можно установить месяц нажатием кнопки M. Для

того, чтобы подтвердить введенное значение и затем

установить день, нажмите кнопку Time (Время).

3. Следуя вышеприведенным инструкциям, установите день,

час и минуты.

4. После установки минут и нажатия кнопки Time (Время) на

экране появятся дата и время.

5. Для изменения даты и времени нажмите и удерживайте

кнопку Time (Время) приблизительно в течение 3 секунд,

2. Aртериальное

давление в

норме

120 - 129 74 - 79 Самостоятельный

контроль

3. артериальное

давление

слегка

повышено

130 - 134 80 - 84 Обратитесь к врачу

4. Артериальное

давление

слишком

высокое

135 - 159 85 - 99 Обратитесь за

медицинской

помощью

5. артериальное

давление

чрезмерно

высокое

≥ 160 ≥ 100 Обратитесь за

медицинской

помощью

Диапазон Систол

ическое Диастол

ическое Рекомендация

Stránka sa načítava...

Microlife BP W1 Basic Používateľská príručka

Microlife BP W1 Basic Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty