Microlife BP W3 Comfort Používateľská príručka

Značka: Microlife

Model: BP W3 Comfort

Kategória: Jednotky krvného tlaku

Typ: Používateľská príručka

IB BP W3 Comfort E-V11 3523

Revision Date: 2023-07-13

W3 Comfort

Wrist Blood Pressure Monitor

Microlife Corporation

9F, 431, RuiGuang Road, NeiHu

Taipei 11492, Taiwan, China

www.microlife.com

Microlife UAB

P. Lukšio g. 32

08222 Vilnius

Lithuania

111

124

PL 137

Microlife BP W3 Comfort

AO-A

AO-B

AO-C

BP W3 ComfortGuarantee Card

Name of Purchaser / Ф.И.О. покупателя / Име на купувача /

Numele cumpărătorului / Imię i nazwisko nabywcy /

Jméno kupujícího / Meno zákazníka / Ime in priimek kupca /

Ime i prezime kupca / Vásárló neve / Ime i prezime kupca

Serial Number / Серийный номер / Сериен номер /

Număr de serie / Numer seryjny / Výrobní číslo / Výrobné číslo /

Serijska števika / Serijski broj / Sorozatszám / Serijski broj

Date of Purchase / Дата покупки / Дата на закупуване /

Data cumpărării / Data zakupu / Datum nákupu / Dátum kúpy /

Datum nakupa / Datum kupovine / Vásárlás dátuma /

Datum kupovine

Specialist Dealer / Специализированный дилер / Специалист

дистрибутор / Distribuitor de specialitate / Przedstawiciel /

Specializovaný dealer / Špecializovaný predajca / Spezializirani

trgovec / Ovlašćeni diler / Forgalmazó / Ovlašteni prodavač

1Microlife BP W3 Comfort EN

Display

Microlife BP W3 Comfort EN

1ON/OFF button

2Display

3M-button (memory)

4Time button

5Battery compartment

6Cuff

7Systolic value

8Diastolic value

9Pulse rate

AT Date/Time

AK Stored value

AL Traffic light indicator

AM Irregular heartbeat (IHB) symbol

AN Cuff signal indicator «ERR 1»

AO Cuff fit check

-A: Suboptimal cuff fit

-B: Arm movement indicator «ERR 2»

-C: Cuff pressure check «ERR 3»

AP Pulse indicator

AQ Battery display

Read the important information in these

instructions for use before using this device.

Follow the instructions for use for your safety

and keep it for future reference.

Type BF applied part

Keep dry

Manufacturer

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Model number

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

This device was developed in collaboration with physicians and clin-

ical tests carried out prove its measurement accuracy to be of a very

high standard.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our prod-

ucts.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol and ISO81060-

2:2013.

Catalogue number

Serial number

(YYYY-MM-DD-SSSSS;

year-month-day-serial number)

Caution

Temperature limitation

Humidity limitation

Medical device

Protected against solid foreign objects of 12.5

mm Ø and greater. Protected against verti-

cally falling water drops when enclosure tilted

up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W3 Comfort EN

Table of contents

1. Important facts about blood pressure and self-measure-

ment

2. Using the device for the first time

Inserting the batteries

Setting the date and time

3. Checklist for taking a reliable measurement

4. Taking a blood pressure measurement

How not to store a reading

How do I evaluate my blood pressure

5. Appearance of the irregular heartbeat (IHB) symbol

6. Data memory

Viewing the stored values

Clearing all values

7. Battery indicator and battery change

Low battery

Flat battery - replacement

Which batteries and which procedure?

Using rechargeable batteries

8. Error Messages

9. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

10. Guarantee

11. Technical Specifications

1. Important facts about blood pressure and self-

measurement

Blood pressure is the pressure of the blood flowing in the

arteries generated by the pumping of the heart. Two values, the

systolic (upper) value and the diastolic (lower) value, are

always measured.

The device indicates the pulse rate (the number of times the

heart beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell them if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating

/ in the evening: before going to bed, bathing or taking medica-

tion) and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results. Therefore we recom-

mend using the MAM technology.

Deviations between measurements taken by your doctor or in

the pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Therefore we recommend using the MAM technology.

Leave a small break of at least 15 seconds between two

measurements.

If you suffer from an irregular heartbeat, measurements taken

with this device should be evaluated with your doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

2. Using the device for the first time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment 5 is on the bottom of the device. Insert the

batteries (2 x 1.5 V, size AAA), thereby observing the indicated

polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the time button 4.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button for approx. 3 seconds until the year number starts to flash.

Now you can enter the new values as described above.

This monitor is specially tested for use in pregnancy and pre-

eclampsia. When you detect unusual high readings in preg-

nancy, you should measure after a short while again (eg.

1 hour). If the reading is still too high, consult your doctor or

gynecologist.

5Microlife BP W3 Comfort EN

3. Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

your feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in

the pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 23 cm (5.25 - 9.05 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

4. Taking a blood pressure measurement

1. Press the ON/OFF button 1 to start the measurement.

2. The cuff fit check AO on the display indicates that the cuff is

perfectly placed. If the icon AO-A appears, the cuff is fitted subop-

timally, but it is still ok to measure.

3. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

4. The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

5. During the measurement, the pulse indicator AP flashes in the

display.

6. The result, comprising the systolic 7 and the diastolic 8 blood

pressure and the pulse rate 9 are displayed. Note also the

explanations on further display symbols in this booklet.

7. Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1 until «M» AK is flashing. Confirm to delete the reading by

pressing the time button 4.

You can stop the measurement at any time by pressing the

ON/OFF button or open the cuff (e.g. if you feel uneasy or an

unpleasant pressure sensation).

«CL» is displayed when the reading is deleted from the

memory successfully.

How do I evaluate my blood pressure

The triangle on the left-hand edge of the display

points at the range

within which the measured blood pressure value lies. The value is

either within the optimum (white), elevated (hatched gray) or high

(black) range. The classification corresponds to the following ranges

defined by international guidelines (ESH, ESC, JSH). Data in mmHg.

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

5. Appearance of the irregular heartbeat (IHB) symbol

This symbol AM indicates that an irregular heartbeat was detected.

In this case, the measured blood pressure may deviate from your

actual blood pressure values. It is recommended to repeat the

measurement.

6. Data memory

This device automatically stores the last 30 measurement values.

Viewing the stored values

Press the M-button 3 briefly, when the device is switched off. The

display first shows «M» AK, and «A»which stands for the average of

all stored values.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been

switched off beforehand) until «CL» appears and then release the

Range Systolic Diastolic Recommendation

1 blood pressure

too high ≥135 ≥85 Seek medical advice

2 blood pressure

elevated 130 - 135 80 - 85 Self-check

3 blood pressure

optimum <130 <80 Self-check

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

Blood pressure readings with suboptimal cuff fit AO-A are not

considered in the average value.

7Microlife BP W3 Comfort EN

button. To permanently clear the memory, press the M-button while

«CL» is flashing. Individual values cannot be cleared.

7. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

AQ will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably,

you should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 5 by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in Section

«2. Using the device for the first time».

Which batteries and which procedure?

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Cancel deletion: press ON/OFF button 1 while «CL ALL»

is flashing.

The memory retains all values although date and time must

be reset – the year number therefore flashes automatically

after the batteries are replaced.

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

8. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «ERR 3», is displayed.

* Please immediately consult your doctor, if this or any other problem

occurs repeatedly.

9. Safety, care, accuracy test and disposal

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

Error Description Potential cause and remedy

«ERR 1»

Signal too

weak The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

«ERR 2»

AO-B Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

«ERR 3»

AO-C No pressure

in the cuff An adequate pressure cannot be gener-

ated in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

«ERR 5» Abnormal

result The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for taking a reliable

measurement and then repeat the

measurement.*

«HI» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

«LO» Pulse too

low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

If you think the results are unusual, please read through the

information in «Section 1.» carefully.

Safety and protection

Error Description Potential cause and remedy

9Microlife BP W3 Comfort EN

This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use this device if you think it is damaged or notice anything

unusual.

Never open this device.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

The measurement results given by this device is not a diagnosis.

It is not replacing the need for the consultation of a physician,

especially if not matching the patient’s symptoms. Do not rely on

the measurement result only, always consider other potentially

occurring symptoms and the patient’s feedback. Calling a doctor

or an ambulance is advised if needed.

Do not use this device if the patient’s condition meets the following

contra-indications, to avoid inaccurate measurements or injuries.

The device is not intended for measuring blood pressure in pedi-

atric patients of age younger than 12 years old (children, infant,

or neonates).

Presence of significant cardiac arrhythmia during measurement

may interfere with blood pressure measurement and affect the

reliability of blood pressure readings. Consult with your doctor

about whether the device is suitable for use in this case.

The device measures blood pressure using a pressured cuff. If

the measuring limb suffers from injuries (for example open

wounds) or under conditions or treatments (for example intrave-

nous drip) making it unsuitable for surface contact or pressuriza-

tion, do not use the device, to avoid worsening of the injuries or

conditions.

Patient motions during measurement may interfere with the

measurement process and influence results.

Avoid taking measurements of patients with conditions, diseases,

and susceptible to environment conditions that lead to incontrol-

lable motions (e.g. trembling or shivering) and inability to commu-

nicate clearly (for example children and unconscious patients).

The device uses oscillometric method to determine blood pres-

sure. The arm being measure should have normal perfusion. The

device is not intended to be used on a limb with restricted or

impaired blood circulation. If you suffer with perfusion or blood

disorders, consult your doctor before using the device.

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed. Be aware of

the risk of strangulation in case this device is supplied with

cables or tubes.

Contra-indications

Avoid taking measurement on the arm on the side of a mastec-

tomy or lymph node clearance.

Do not use this device in a moving vehicle (for example in a car

or on an aircraft).

Indicates a potentially hazardous situation, which if not avoided,

could result in death or serious injury.

This device may only be used for the intended uses described in

this Instructions for Use. The manufacturer cannot be held liable

for damage caused by incorrect application.

Do not change the patient medication and treatment based the

result of one or multiple measurements. Treatment and medica-

tion changes should be prescribed only by a medical profes-

sional.

Inspect the device, cuff, and other parts for damage. DO NOT

USE the device, cuff or parts if they appear damaged or operating

abnormally.

Blood flow of the arm is temporarily interrupted during measure-

ment. Extended interruption of blood flow reduces peripheral

circulation and may cause tissue injury. Beware of signs (for

example tissue discoloration) of impeded peripheral circulation if

taking measurements continuously or for an extended period of

time.

Prolonged exposure to cuff pressure will reduce peripheral perfu-

sion and may lead to injury. Avoid situations of extended cuff

pressurization beyond normal measurements. In the case of

abnormally long pressurization, abort the measurement or loose

the cuff to depressurize the cuff.

Do not use this device in oxygen rich environment or near flam-

mable gas.

The device is not water resistant or water proof. Do not spill or

immerse the device in water or other liquids.

Do not dissemble or attempt to service the device, accessory and

parts, during use or in storage. Access to the device internal hard-

ware and software is prohibited. Unauthorized access and

servicing of the device, during use or in storage, may compromise

the safety and performance of the device.

Keep the device away from children and people incapable of

operating the device. Beware of the risks of accidental ingestion

of small parts and of strangulation with the cables and tubes of

this device and accessories.

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury to the user or patient, or cause

damage to the device or other property.

WARNING

CAUTION

11Microlife BP W3 Comfort EN

The device is intended only for measuring blood pressure at wrist.

Do not measure other sites because the reading does not reflect

your blood pressure accurately.

After a measurement is completed, loosen the cuff and rest for >

5 minutes to restore limb perfusion, before taking another

measurement.

Do not use this device with other medical electrical (ME) equip-

ment simultaneously. This may cause device malfunction or

measurement inaccuracies.

Do not use this device in proximity of high frequency (HF) surgical

equipment, magnetic resonance imaging (MRI) equipment, and

computerized tomography (CT) scanners. This may cause device

malfunction and measurement inaccuracies.

Use and store the device, cuff and parts in temperature and

humidity conditions specified in the «Technical Specifications».

Usage and storage of the device, cuff and parts in conditions

outside ranges given in the «Technical Specifications» may

results in device malfunction and the safety of usage.

Protect the device and accessories from the following to avoid

damaging the device:

water, other liquids, and moisture

extreme temperatures

impacts and vibrations

direct sunlight

contamination and dust

Stop using this device and cuff and consult with your doctor if you

experience skin irritation or discomfort.

Electromagnetic Compatibility Information

This device is compliant with EN60601-1-2: 2015 Electromagnetic

Disturbances standard.

This device is not certified to be used in vicinity of High Frequency

(HF) medical equipment.

Do not use this device close to strong electromagnetic fields and

portable radio frequency communication devices (for example

microwave oven and mobile devices). Keep a minimum distance of

0.3 m from such devices when using this device.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild

detergent.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

10.Guarantee

This device is covered by a 5 year guarantee from the date of

purchase. During this guarantee period, at our discretion, Microlife

will repair or replace the defective product free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

Transport costs and risks of transport.

Damage caused by incorrect application or non-compliance with

the instructions for use.

Damage caused by leaking batteries.

Damage caused by accident or misuse.

Packaging/storage material and instructions for use.

Regular checks and maintenance (calibration).

Accessories and wearing parts: Batteries.

The cuff is covered by a functional guarantee (bladder tightness) for

2 years.

Should guarantee service be required, please contact the dealer

from where the product was purchased, or your local Microlife

service. You may contact your local Microlife service through our

website: www.microlife.com/support

Compensation is limited to the value of the product. The guarantee

will be granted if the complete product is returned with the original

invoice. Repair or replacement within guarantee does not prolong or

renew the guarantee period. The legal claims and rights of

consumers are not limited by this guarantee.

11.Technical Specifications

Batteries and electronic devices must be disposed of in

accordance with the locally applicable regulations, not with

domestic waste.

Operating

conditions: 10 - 40 °C / 50 - 104 °F

15-90 % relative maximum humidity

Storage conditions: -20 - +55 °C / -4 - +131 °F

15-90 % relative maximum humidity

Weight: 112 g (including batteries)

Dimensions: 81 x 65 x 21 mm

Cuff size: 13.5 - 23 cm (5.25 - 9.05 inches)

Measuring proce-

dure: oscillometric, corresponding to Korotkoff

method: Phase I systolic, Phase V diastolic

Measurement range: 20 - 280 mmHg – blood pressure

40 - 199 beats per minute – pulse

Cuff pressure display

range: 0 - 299 mmHg

13Microlife BP W3 Comfort EN

This device complies with the requirements of the Medical Device

Directive 93/42/EEC.

Technical alterations reserved.

Resolution: 1 mmHg

Static accuracy: within ± 3 mmHg

Pulse accuracy: ± 5 % of the readout value

Voltage source: 2 x 1.5 V alkaline batteries; size AAA

Battery lifetime: approx. 320 measurements

(using new batteries)

IP Class: IP 22

Reference to

standards: EN 1060-1 /-3 /-4; IEC 60601-1;

IEC 60601-1-2 (EMC); IEC 60601-1-11

Expected service life: Device: 5 years or 10000 measurements,

whichever comes first

Accessories: 2 years or 5000 measure-

ments, whichever comes first

14Microlife BP W3 Comfort RU

Дисплей

Microlife BP W3 Comfort RU

1Кнопка ВКЛ/ВЫКЛ

2Дисплей

3Кнопка M (Память)

4Кнопка Time (Время)

5Отсек для батарей

6Манжета

7Систолическое давление

8Диастолическое давление

9Частота пульса

AT Дата/Время

AK Сохраненное значение

AL Индикатор уровня давления

AM Символ IHB - обнаружения нерегулярного сердцебиения

AN Индикатор сигнала манжеты «ERR 1»

AO Проверка размещения манжеты

-A:Оптимальное положение манжеты

-B:Индикатор движения руки «ERR 2»

-C:Контроль давления манжеты «ERR 3»

AP Индикатор пульса

AQ Индикатор разряда батарей

Перед использованием этого устройства

прочитайте важную информацию в данной

инструкции по эксплуатации. В целях

безопасности соблюдайте инструкцию по

эксплуатации и сохраните её для

последующего использования.

Изделие типа BF

Хранить в сухом месте

Производитель

Батарейки и электронные приборы

следует утилизировать в соответствии с

принятыми нормами и не выбрасывать

вместе с бытовыми отходами.

15Microlife BP W3 Comfort RU

Предназначение:

Прибор для измерения артериального давления и частоты

пульса предназначен для неинвазивного измерения артериаль-

ного давления у людей в возрасте 12 лет и старше.

Уважаемый покупатель,

Прибор был разработан в сотрудничестве с врачами, а клиниче-

ские тесты подтвердили высокую точность его измерений.*

При возникновении вопросов, проблем или для заказа запасных

частей, пожалуйста, обращайтесь в местный сервисный центр

Microlife. В качестве альтернативы, посетите в Интернете стра-

ницу www.microlife.ru, где Вы сможете найти ряд полезных

сведений по нашему изделию.

Будьте здоровы – Microlife AG!

* Этот прибор протестирован в соответствии с прото-

колом Европейского Общества Гипертонии (ESH) и ISO81060-

2:2013.

Официальный представитель в

Европейском Сообществе

Модель номер

Номер по каталогу

Серийный номер (ГГГГ-ММ-ДД-ССССС;

год-месяц-день-серийный номер)

Осторожно

Пределы допустимой температуры

Пределы допустимой влажности

Медицинский прибор

Защищен от твердых посторонних

предметов диаметром 12,5 мм и больше.

Защита от вертикально падающих капель

воды при наклоне корпуса до 15°.

IP22

Храните устройство в месте, недоступном

для детей в возрасте от 0 до 3 лет.

Сертификация СЕ

Оглавление

1. Важная информация об артериальном давлении и само-

стоятельное измерение

2. Использование прибора в первый раз

Установка батареек

Установка даты и времени

3. Рекомендации для получения надежных результатов

измерений

4. Выполнение измерений артериального давления

Как отменить сохранение результата

Как определить артериальное давление

5. Появление символа - IHB (обнаружение нерегулярного

сердцебиения)

6. Память

Просмотр сохраненных значений

Удаление всех значений

7. Индикатор разряда батарей и их замена

Батареи почти разряжены

Замена разряженных батарей

Элементы питания и процедура замены

Использование аккумуляторов

8. Сообщения об ошибках

9. Техника безопасности, уход, проверка точности и

утилизация

Уход за прибором

Очистка манжеты

Проверка точности

Утилизация

10. Гарантия

11. Технические характеристики

1. Важная информация об артериальном давлении

и самостоятельное измерение

Артериальное давление - это давление крови, подаваемой

сердцем в артерии. Всегда измеряются два значения, систо-

лическое (верхнее) давление и диастолическое (нижнее)

давление.

Кроме того, прибор показывает частоту пульса (число ударов

сердца в минуту).

Постоянно повышенное артериальное давление может

нанести ущерб Вашему здоровью, и в этом случае Вам

необходимо обратиться к врачу!

Всегда сообщайте врачу о Вашем давлении и сообщайте

ему/ей, если Вы заметили что-нибудь необычное или

чувствуете неуверенность. Никогда не полагайтесь на

результат однократного измерения артериального

давления.

17Microlife BP W3 Comfort RU

Существует несколько причин возникновения высокого

артериального давления. Ваш лечащий врач расскажет о

них более подробно и предложит подходящее лечение.

Кроме приема лекарственных средств, снижение веса и

физические нагрузки помогут снизить артериальное

давление.

Ни при каких обстоятельствах не меняйте дозировку

лекарств и не занимайтесь самолечением без консуль-

тации вашего лечащего врача.

В зависимости от физических нагрузок и состояния, арте-

риальное давление подвержено знaчитeльным колебаниям в

течение дня. Поэтому каждый раз процедура измерений

должна проводиться в спокойных условиях и когда Вы

не чувствуете напряжения! Потребуется не менее двух

измерений (каждое утро и каждый вечер) для определения

среднего значения измерений.

Совершенно нормально, если при двух измерениях подряд

полученные результаты будут отличаться друг от друга.

Поэтому мы рекомендуем использовать МАМ-технологию.

Расхождения между результатами измерений, получен-

ными врачом или в аптеке, и результатами, полученными в

домашних условиях, также являются вполне нормальными,

поскольку ситуации, в которых проводятся измерения, совер-

шенно различны.

Несколько измерений обеспечат Вас гораздо более

надежной информацией об артериальном давлении, чем

одно измерение. Поэтому мы рекомендуем использовать

МАМ-технологию.

Сделайте небольшой перерыв, по крайней мере, в

15 секунд между двумя измерениями.

Если Вы страдаете нарушением сердцебиения измерения,

сделанные с помощью этого прибора, должны быть оценены

Вашим лечащим врачом.

Показания пульса не пригодны для использования в

качестве контроля частоты кардиостимулятора!

Во время беременности следует тщательно следить за

артериальным давлением, поскольку на протяжении этого

периода оно может существенно меняться!

Этот прибор специально тестировался для применения

при беременности и преэклампсии. Если во время

беременности Вы обнаружили необычно высокий

результат, то Вы должны осуществить повторное

измерение (например через 1 час). Если результат по-

прежнему высокий, то проконсультируйтесь со своим

лечащим врачом или гинекологом.

2. Использование прибора в первый раз

Установка батареек

После того, как Вы вынули прибор из упаковки, прежде всего,

вставьте батареи. Отсек для батарей 5 расположен на нижней

части прибора. Вставьте батареи (2 х тип AAA 1.5V (В)),

соблюдая полярность.

Установка даты и времени

1. После установки новых батарей на дисплее начнет мигать

цифра показывающая год. Для установки года, нажмите

кнопку M 3. Нажмите кнопку time 4, чтобы подтвердить

настройку года и перейти к настройке месяца.

2. Нажмите кнопку M для установки месяца. Нажмите кнопку

time, чтобы подтвердить настройку месяца и перейти к

настройке дня.

3. Следуя вышеприведенным инструкциям, установите день,

час и минуты.

4. После установки минут и нажатия кнопки time установка даты

и времени закончены, затем отображается время на

дисплее.

5. Если вы хотите изменить дату или время, нажмите и держите

нажатой кнопку time в течение примерно 3 секунд, пока не

начнет мигать цифра показывающая год. Введите новые

значения, как описано выше.

3. Рекомендации для получения надежных

результатов измерений

1. Избегайте физической активности, не ешьте и не курите

непосредственно перед измерением.

2. Присядьте на стул со спинкой на пять минут и расслабьтесь.

Поставьте ноги на пол ровно и не скрещивайте их.

3. Всегда проводите измерения на том же запястье в поло-

жении сидя. Используйте запястье, которое обычно показы-

вает более высокие значения артериального давления.

4. Снимите одежду и, например, часы, для того, чтобы освобо-

дить запястье.

5. Убедитесь, что используется манжета правильного размера

(маркировка на манжете).

6. Удобно наложите манжету, но не слишком туго. Манжета

рассчитана на запястье обхватом от 13,5 - 23 cm см (5,25 -

9,05 дюймов).

7. Расположите руку так, чтобы она оставалась расслабленной

и убедитесь в том, что прибор находится на той же высоте,

что и сердце.

4. Выполнение измерений артериального давления

1. Нажмите кнопку ВКЛ/ВЫКЛ 1 для начала измерения.

Stránka sa načítava ...

Microlife BP W3 Comfort Používateľská príručka

Značka: Microlife

Model: BP W3 Comfort

Kategória: Jednotky krvného tlaku

Typ: Používateľská príručka

Stiahnite si PDF

správa

V iných jazykoch

română: Microlife BP W3 Comfort Manual de utilizare

Súvisiace články

Ďalšie dokumenty

Nissei WS-C2 Používateľská príručka