Auriol 114324-15-01 Operation and Safety Notes

IAN 114324

RADIO-CONTROLLED WEATHER STATION

IAN 114324

RADIO-CONTROLLED

WEATHER STATION

Operation and Safety Notes

ST A CJA METEO

STEROW ANA RADIOWO

Wskazówki dotyczące obsługi i bezpieczeństwa

BEZDRÁTOV Á METEOSTANICE

Pokyny pro obsluhu a bezpečnostní pokyny

METEOST ANICA

Pokyny pre obsluhu a bezpečnostné pokyny

RADIJSKO VODENA

VREMENSKA POSTAJA

Navodila za upravljanje in varnostna opozorila

RÁDIÓVEZÉRELT

IDŐJÁRÁSÁLLOMÁS

Kezelési és biztonsági utalások

GB Operation and Safety Notes Page 5

PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 28

HU Kezelési és biztonsági utalások Oldal 53

SI Navodila za upravljanje in varnostna opozorila Stran 76

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 100

SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 123

A

1 2

13 14 15 16

6

5

17 18 19 20

3 4

1 32

13

17 18 19

20

6

5

14 15 16

4

114324-15-01

114324-15-02

114324-15-03

114324-15-04

11

B

25 109

11

8

C

22

21

23

24

21

22

23

24

114324-15-01

114324-15-02

114324-15-03

114324-15-04

5

7

D

9

12

114324-15-01

114324-15-02

114324-15-03

114324-15-04

26

27

28

26

27

28

29

9

5

29

12

E

2

114324-15-01

114324-15-02

114324-15-03

114324-15-04

2

5 GB

Intended use .......................................................................................Page 6

Parts description ...............................................................................Page 6

Technical Data ....................................................................................Page 7

Scope of delivery..............................................................................Page 8

General safety instructions ..........................................................Page 8

Battery safety information ...........................................................Page 9

Start-up

Setting up the devices ........................................................................Page 10

Starting the outdoor sensor / changing batteries ..............................Page 11

Starting the base station / changing batteries ..................................Page 11

The DCF signal (time transmitter) .......................................................Page 12

Information in base mode

The clock field .....................................................................................Page 13

The barometric pressure field.............................................................Page 14

The indoor temperature field..............................................................Page 15

The outdoor temperature field ...........................................................Page 17

Settings .................................................................................................Page 18

Basic settings .......................................................................................Page 19

Temperature alarm .............................................................................Page 21

Activating the temperature alarm ......................................................Page 21

Alarm ...................................................................................................Page 22

Accessing stored data ........................................................................Page 23

Manually activating signal reception

Activating DCF signal reception ........................................................Page 24

Activating reception from the outdoor sensor ...................................Page 24

Background lighting ...........................................................................Page 24

Troubleshooting ................................................................................Page 24

Cleaning and Care............................................................................Page 25

Disposal ................................................................................................Page 25

Declaration of Conformity ............................................................Page 26

Warranty .............................................................................................Page 27

6 GB

Radio-controlled weather station

Intended use

This radio-controlled weather station displays the indoor and outdoor

temperature, indoor and outdoor humidity, and barometric pressure.

It features a radio-controlled clock and several alarm functions. The

probable weather trend is calculated based on data collected. The

product is not intended for commercial use.

Parts description

Base station

1

Display

2

SNOOZE- / LIGHT ﬁeld

3

Keypad

4

Base station eyebolt

5

Battery compartment cover

6

Stand

7

Battery compartment

Outdoor sensor

8

Signal LED

9

Battery compartment cover

10

Outdoor sensor eyebolt

11

Outdoor sensor stand

12

Outdoor sensor battery

compartment

Keypad

13

SET- / HISTORY button

14

UP button

15

DOWN- / button

16

ALARM- / SET button

17

CH button

18

ALERT button

19

MEM button

20

°C / °F button

Display

21

Clock ﬁeld

22

Barometric pressure ﬁeld

23

Indoor temperature ﬁeld

24

Outdoor temperature ﬁeld

25

Outdoor sensor display

7 GB

Outdoor sensor buttons next to battery compartment

26

°C / °F button

27

TX button (Channel reset

button)

28

Channel selector switch

Optional power supply

29

Mains adapter

Technical Data

Base station:

Temperature measurement range: 0 °C to 50 °C

32 °F to 122 °F

Humidity measurement range: 20 % to 95 %

Radio-controlled clock: DCF77

Batteries: 2 x LR06 (UM-3), 1.5 V

(size AA)

Barometric pressure

measurement range: 850 hPa to 1050 hPa

25.1 inHg to 31.1 inHg

Mains adapter:

Input: 230–240 V

~

50 Hz, 50 mA

Output: 4.5 V

, 150 mA

Model: HX0180450150D2E

Protection class:

Outdoor sensor:

Temperature measurement range: -20 °C to +50 °C

-4.0°F to + 122 °F

Humidity measurement range: 20 % to 95 %

Data transmission frequency: 433 MHz

8 GB

Wireless range: max. 100 m (open area)

Batteries: 2 x LR06 (UM-3), 1.5 V

(size AA)

Protection class: IPX3

Scope of delivery

1 Weather station

1 Outdoor sensor

4 Batteries, type LR06, 1.5 V

1 Mains adapter

1 Set of operating instructions

General safety instructions

Before using the product, please familiarise yourself with all of the

safety information and instructions for use! When passing this product

on to others, please also include all the documents!

This product may be used by children age 8 years and

up, and persons with reduced physical, sensory or

mental capacity or lacking experience and

knowledge, when supervised or instructed on the safe use of the

product and the associated risks. Children should not be allowed to

play with the appliance. Cleaning and user maintenance should

not be performed by children without supervision.

Do not use the device if it is damaged.

Do not expose the base station to moisture or direct sunlight.

Before using the product, ensure that the available mains voltage

corresponds with the operating voltage required for the mains

supply (230–240 V ∼, 50 Hz).

9 GB

Before using the product, verify the product and the mains supply

and the cable connection aren‘t damaged! Never operate a

damaged device!

The appliance must be plugged into an easily accessible socket

so it can easily be unplugged in the event of an emergency.

This product does not contain any parts that can be serviced by

the user. The LEDs cannot be exchanged.

The product is only suited for use with the included mains adapter

(model no. HX0180450150D2E).

Please note that the power adapter continues to draw a small

amount of power even if the product is turned oﬀ as long as the

power adapter is plugged into a power outlet. To switch the prod-

uct oﬀ completely, unplug the power adapter from the socket.

Battery safety information

DANGER TO LIFE! Batteries are not intended

for children. If accidentally swallowed seek immediate medical

attention!

CAUTION! EXPLOSION HAZARD! Never

recharge non-rechargeable batteries, short-circuit

and / or open batteries!

Never throw batteries into ﬁre or water!

Do not exert mechanical loads to batteries!

Risk of battery leakage

In the event of a battery leak, immediately remove it from the

device to prevent damage!

Avoid contact with the skin, eyes and mucous membranes! In the

event of contact with battery acid, thoroughly ﬂush the aﬀected

area with plenty of clean water and seek immediate medical

attention!

10 GB

Only use the same type of batteries! Do not mix used and new

batteries!

Avoid extreme environmental conditions and temperatures as they

may aﬀect batteries e.g. above radiators!

Remove the batteries from the device if they have not been used

for a long period!

Risk of equipment damage

Only use the speciﬁed battery type!

When inserting the battery ensure the correct polarity! This is

shown in the battery compartment!

If necessary, clean the battery and device contacts before

inserting the battery!

Promptly remove drained batteries from the product!

Start-up

Note: First insert the batteries in the outdoor sensor, then the weather

station.

Setting up the devices

ATTENTION: First start the outdoor sensor, then the base station.

If possible, do not expose the outdoor sensor or base station to

direct sunlight.

The base station as well as the outdoor sensor can be hung by

the eyebolt

4

or

10

. Or ﬂip out the stand

6

or

11

on either

device to place the device on a horizontal, level surface.

11 GB

Starting the outdoor sensor /

changing batteries

Open the battery compartment

12

on the back of the outdoor

sensor by sliding the battery cover

9

in the direction of the arrow.

When changing batteries ﬁrst remove the old batteries.

Insert the new batteries, type LR06, in the battery compartment

12

.

Check the polarity of the battery during insertion. This is indicated

in the battery compartment.

Close the battery cover.

The signal LED

8

at the front of the outdoor sensor will brieﬂy

light up. The signal LED will then ﬂash about twice a minute,

indicating wireless transmission.

Starting the base station / changing

batteries

Open the battery cover

5

at the back of the base station by

pulling up on the tab at the bottom of the battery compartment.

When changing batteries ﬁrst remove the old batteries.

Insert the new batteries, type LR06, in the battery compartment

7

.

Check the polarity of the battery during insertion. This is indicated

in the battery compartment.

Close the battery cover.

The display

1

will brieﬂy light up and run a brief check of all

display elements.

Alternatively, ﬁrst remove the batteries from the battery

compartment.

Plug the low voltage plug of the mains adapter

29

into the low

voltage jack in the base station and plug the mains adapter into

an easily accessible outlet. The display will permanently light up

and run a brief check of all display elements.

12 GB

The outdoor temperature ﬁeld

24

will show an animation of the

reception symbol

, indicating the base station is searching for

the signal from the outdoor sensor.

If no outdoor temperature is displayed after 3 minutes,the base

station will stop searching. The animation of the reception symbol

will turn oﬀ and the outdoor temperature ﬁeld will show --._ °C and

--._ %. Most likely, the signal cannot be received due to structural

factors, reinforced concrete walls, the brickwork being too solid,

or the distance between the units. After ﬁnding a better location for

the outdoor sensor, reception will need to be restarted.

Press and hold the CH button

17

at the back of the base station

for 3 seconds until the reception signal becomes animated again.

The weather station will automatically start receiving the DCF

radio signal, regardless if signal from the outdoor sensor was

received or not. The clock ﬁeld

21

will show an animated radio

tower icon

, indicating the receiver for the DCF signal is starting

to receive the time.

The DCF signal (time transmitter)

The DCF signal (German time transmission station) consists of time

impulses emitted by one of the most accurate clocks in the world,

located near Frankfurt / Main, Germany.

In ideal conditions, your weather station can pick up this signal over a

distance of up to approx. 1500 km around Frankfurt / Main.

If the signal is detected the clock display

21

will show the current

Central European Time, date and day of the week. A static radio

tower signal

appears. For more details please refer to section

Basic settings.

If the attempts to receive a signal fail the base station will stop

attempting to receive a signal after 7 minutes and the radio tower

13 GB

signal will disappear. For information on how to resolve this issue

please refer to chapter Troubleshooting.

You may reactivate reception by pressing and holding the

DOWN-/

button

15

for three seconds until an radio tower

signal

in the clock display

21

becomes animated.

You also have the option to set the time manually. For more

details please refer to section Basic settings.

Once the base station has received the signal from the outdoor

sensor and the DCF signal, it enters base mode.

In base mode the base station will display the following information:

Information in base mode

The clock ﬁeld

21

Time:

The time will be displayed in 24 hour

format according to the default settings.

When selecting 12 hour mode in basic

settings, the time from 12:00 o‘clock in

the afternoon until 11:59 o‘clock at night will show PM (Latin for

„post meridiem“ = afternoon) in front of the time.

During Daylight Saving Time DST will appear at the top between the

hour and minute. This display is only functional when receiving the

DCF signal.

Date and day:

To the left of the ab-

breviation D (Day) the

14 GB

date of the current day appears, and to the left of the abbreviation M

(month) the date of the current month. On the right the abbreviation

for the current day of the week appears. The default language for this

abbreviation is German, but can be changed. Please refer to section

Basic settings.

The radio tower symbol:

The radio tower symbol indicates successful reception of the

DCF signal. The weather station synchronises its internal

clock with the time station every night. During synchronisation

this symbol will ﬂash. If reception was successful the symbol will be

static until the next reception cycle.

The lunar phase:

The current lunar phase is indicated as follows:

The portion of the moon not illuminated will be dark in

the display.

The barometric pressure ﬁeld

22

Barometric pressure display:

At the top right is the barometric

pressure at the time shown in the HIST

ﬁeld (history).

If LLL (or LL.LL when setting the unit

inHg), the display range is below

850 hPa (25.1 inHg), if HHH (or

HH.HH), it is above.

15 GB

By default the current barometric pressure (HIST = 0) is shown in the

unit mb (millibar) or hPa (hectopascal). However, the display can also

be set to the uncommon unit inHg (inch of mercury). Please refer to

section Basic settings.

The bar graph shows a graphic of the barometric pressure 0, 1, 2, 3,

6 and 12 hours ago.

The barometric pressure trend:

The trend will appear as rising (or dropping), when the

barometric pressure changes by 2 hPa (= 0.06 inHg) or

more within an hour and will maintain the direction for one

hour even without any further change.

The weather forecast:

The weather station calculates a weather forecast for about the next

12 hours based on the barometric pressure trend. Of course this fore-

cast can‘t compare to that of professional weather services supported

by satellites and high performance computers, but merely provides an

approximate indication of current developments.

Available graphic forecasts are:

slightly cloudy sunny cloudy rainy snow

The indoor temperature ﬁeld

23

The indoor temperature:

The indoor temperature measured by the base

station is displayed with indexing up to a tenth

of a degree. The temperature unit °C (for

16 GB

degrees Celsius) appears at the top right. The temperature unit can

also be set to the now uncommon unit °F (degrees Fahrenheit). To

change to this unit press the °C/F button

20

. If LL.L appears, it is be-

low the measurement range of 0 °C to 50 °C (or 32 °F to 122 °F),

when HH.H appears it is above.

The relative humidity:

This displays the relative humidity to which the

base station is exposed.

The temperature- or humidity trend:

The trend will appear as rising (or dropping), when the

temperature changes by 2 °C (= 3.6 °F) or more within

an hour and will maintain the direction for one hour even

without any further change. The humidity trend will respond accord-

ingly with a change of 2 % in humidity.

Indoor climate rating:

Based on the indoor humidity and temperature the weather station

will rate the indoor climate using the following key:

DRY humidity below 40 %

COMFORT humidity between 40 and 70 %,

and a temperature range between 20 °C–28 °C

(68 °F–82.4 °F).

WET humidity higher than 70 %

When the indoor temperature is outside the 20 °C–28 °C range no

indoor climate rating will appear.

17 GB

Low battery:

If the battery symbol appears the batteries in the base

station should be replaced as soon as possible. Please

refer to the instructions in section Starting the base station /

changing batteries.

The outdoor temperature ﬁeld

24

The outdoor temperature:

The outdoor temperature is displayed with in-

dexing up to a tenth of a degree. The tempera-

ture unit °C (for degrees Celsius) appears at

the top right. The temperature unit can also be

set to the now uncommon unit °F (degrees Fahrenheit).

To change to this unit press the °C / F button

20

.

If LL.L appears, it is below the measurement range of -20 °C to

50 °C (or- 4 °F to 122 °F), when HH.H appears it is above.

The relative humidity:

This displays the relative humidity to which the

outdoor sensor is exposed.

The temperature- or humidity trend:

The trend will appear as rising (or dropping), when the

temperature changes by 2 °C (= 3.6 °F) or more within an

hour and will maintain the direction for one hour even with-

out any further change. The humidity trend will respond accordingly

with a change of 2 % in humidity.

Stránka sa načítava ...

Auriol 114324-15-01 Operation and Safety Notes

Auriol 114324-15-01 Operation and Safety Notes

V iných jazykoch

Súvisiace články

Ďalšie dokumenty