Panasonic SCHC57EG Návod na používanie

Kategória
Inteligentné hodinky
Typ
Návod na používanie
RQT9714-2R
POLSKI ENGLISH
until
2012/03/31
ČESKY
Operating Instructions
Instrukcja obsługi
Návod k obsluze
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Dziękujemy za zakupienie tego produktu.
Przed podłączeniem, obsługą lub regulacją sprzętu prosimy o dokładne zapoznanie się z treścią niniejszej
instrukcji.
Prosimy o zachowanie niniejszej instrukcji obsługi.
Děkujeme, že jste si zakoupil tento výrobek.
Dříve, než se pustíte do zapojování a začnete výrobek používat či provádět nastavování, prostudujte si prosím celý
tento návod.
Uschovejte si prosím tento návod k obsluze.
Compact Stereo System
Kompaktowy zestaw stereo
Kompaktní stereo systém
Model No. SC-HC57
Included Installation Instructions (> 2, 6)
The installation should never be done by any other than a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating instructions to ensure
that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
Załączone instrukcje instalacji (> 24, 28)
Instalacja może być przeprowadzana wyłącznie przez wykwalifikowanych specjalistów
zajmujących się instalacją.
Przed rozpoczęciem pracy należy się dokładnie zapoznać z instrukcją instalacji oraz z instrukcją obsługi, aby się
upewnić, że instalacja została przeprowadzona prawidłowo.
(Proszę zachować niniejszą instrukcję. Będzie ona potrzebna podczas serwisowania lub przenoszenia
urządzenia.)
Přiložené pokyny k instalaci (> 44, 48)
Instalaci by měl provést kvalifikovaný odborník.
Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a návod k obsluze, abyste instalaci provedli
opravdu správně.
(Tyto pokyny si uschovejte. Můžete je potřebovat při údržbě nebo přesouvání tohoto zařízení.)
EG
SC-HC57EG~RQT9714-2R.book Page 1 Wednesday, April 18, 2012 4:43 PM
2
RQT9714
Safety precautions
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or
splashing.
Do not place objects filled with liquids, such as vases, on
this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the
plug.
Do not use a damaged mains plug or socket outlet.
Install this unit so that the AC mains lead can be unplugged
from the socket outlet immediately if any problem occurs.
Button-type battery (Lithium battery)
Risk of fire, explosion and burns. Do not recharge,
disassemble, heat above 60
o
C or incinerate.
Keep the Button-Type battery out of the reach of children.
Never put Button-Type battery in mouth. If swallowed call
your doctor.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted
candles, on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
This unit is intended for use in moderate climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Button-type battery (Lithium battery)
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Insert with poles aligned.
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
Remove the battery if you do not intend to use the remote
control for a long period of time. Store in a cool, dark
place.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
NORSK
Produkt
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Utsett ikke produktet for regn, fukt, drypping eller sprut.
Ikke plasser objekter som er fylt med væske, som vaser,
på apparatet.
Bruk kun anbefalt tilbehør.
Fjern ikke deksler.
Reparer ikke denne enheten selv, overlat service til
kvalifisert servicepersonell.
Vekselstrømnett
Strømuttaket må befinne seg i nærheten slik at den lett kan
kobles fra uttaketumiddelbart om det oppstår problemer.
Produkt
Dette produktet anvender en laser. Betjening av kontroller
eller justering eller andre inngrep enn de beskrevet i denne
bruksanvisning kan føre til farlig bestråling.
Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
Dette apparatet er beregnet for bruk under moderate
klimaforhold.
Plassering
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Ikke plasser apparatet i en bokhylle, et innebygget
kabinett eller et annet lukket sted. Pass på at produktet er
godt ventilert.
Apparatets ventilasjonsåpninger må ikke dekkes til med
aviser, duker, gardiner eller lignende.
WARNING
CAUTION
ADVARSEL
FORSIKTIG
SC-HC57~RQT9714.book Page 2 Thursday, February 23, 2012 4:13 PM
3
RQT9714
ENGLISH
Accessories
Product Identification Marking is located on the bottom of
the unit.
Check the supplied accessories before using this unit.
1 Remote control
(with a battery)
(N2QAYC000057)
1 AC mains lead
1 FM indoor
antenna
Wall mounting accessories
1 Safety holder
1 Screw
2 Wall mount
brackets
Do not use AC mains lead with other equipment.
Product numbers provided in this operating instructions are
correct as of January 2012. These may be subject to change.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products and used batteries, please
take them to applicable collection points, in accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please
contact your local municipality, your waste disposal service or the point of sale where
you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
Cd
SC-HC57~RQT9714.book Page 3 Thursday, February 23, 2012 4:13 PM
4
RQT9714
Table of contents
Safety precautions............................................ 2
Accessories....................................................... 3
Playable media.................................................. 4
Control reference guide ................................... 5
Attaching the unit to a wall (optional)............. 6
Connections ...................................................... 8
Inserting or removing media ........................... 8
AirPlay ............................................................... 9
Playback operations........................................11
Listening to the radio ..................................... 13
Internet Radio.................................................. 14
Sound adjustment .......................................... 14
Clock and Timer.............................................. 14
Others .............................................................. 15
Troubleshooting.............................................. 17
Specifications ................................................. 19
Unit and media care........................................ 20
Licenses .......................................................... 20
Playable media
Please be aware that Panasonic accepts no responsibility for
the loss of data and/or information.
(as of January 2012)
Compatibility depends on the software version. Update your
iPod/iPhone to the latest software before using it with this
unit.
Depending on the model, it may be necessary to remove the
iPod/iPhone and select the album, artist, etc. on the iPod/
iPhone.
Be sure to use a dock adapter that is compatible with your
iPod/iPhone. To purchase a dock adapter, consult your iPod/
iPhone dealer. If a dock adapter is not available, insert and
remove the iPod/iPhone with care.
Charging the iPod/iPhone
The iPod/iPhone will start being charged once connected
to this unit.
In standby mode, “IPOD CHARGING” is shown on the main
unit’s display.
Check the iPod/iPhone to see if the battery is fully charged.
(Once fully recharged, additional recharging will not occur.)
A disc with the CD Logo.
This unit can play back discs that conform to the CD-DA
format.
The unit may not be able to play some discs due to the
condition of the recording.
This unit does not guarantee connection with all USB
devices.
FAT12, FAT16 and FAT32 file systems are supported.
This unit supports USB 2.0 full speed.
This unit can support USB devices of up to 32 GB.
Supported format: Files with the extension “.mp3” or “.MP3”.
Compatible compression rate: Between 64 kbps and
320 kbps (stereo).
Depending on how you create the MP3 files, they may not
play in the order you numbered them or may not play at all.
Creating MP3 files on a CD-R/RW
Maximum number of tracks and albums: 999 tracks and 254
albums (Excluding Root folder).
Disc formats: ISO9660 level 1 and level 2 (except for
extended formats).
If the disc includes both MP3 and normal audio data
(CD-DA), the unit plays the type recorded in the inner part of
the disc.
This unit cannot play files recorded using packet write.
Creating MP3 files on a USB device
Maximum number of tracks and albums: 2500 tracks and 254
albums (Excluding Root folder).
Only one memory card will be selected when connecting a
multiport USB card reader, typically the first memory card
inserted.
Operations in these instructions are described
using the remote control, but you can do the
operations with the main unit if the operations
are the same.
Compatible iPod/iPhone for
docking
iPod touch
1st, 2nd, 3rd, and 4th generation
iPod nano
2nd, 3rd, 4th, 5th, and 6th generation
iPod classic
iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G /
iPhone
Compatible CD
Compatible USB devices
Compatible MP3 files
RQT9714~body1_mst.fm Page 4 Thursday, March 8, 2012 11:32 AM
5
RQT9714
ENGLISH
Control reference guide
Remote control
1 Turn this unit on or off
2 Select the audio source
3 Basic playback control buttons
4 Enter setup menu
5 Enter the iPod/iPhone menu /
Change displayed information
6 Open/close the sliding door
7 Adjust the volume
8 Mute the sound
Mutes the sound. Press again to
cancel. “MUTE” is also cancelled
when the volume is adjusted or the
unit is turned off.
9 Enter playback menu
10 Enter sound menu
11 Selection/OK
Preparation
Remove the insulation sheet A before using.
To replace a button-type battery
1 While pressing the stopper B,
pull out the battery holder.
2 Set the button-type battery with
its (i) mark facing upward and
then put the battery holder back
in place.
Keep the button-type battery out of
reach of children to prevent
swallowing.
Battery type: CR2025 (Lithium battery)
The battery should normally last about 1 year, however this depends on how
frequently the unit is used.
Main unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small
amount of power.
2 Open/close the sliding door (for iPod/iPhone)
3 Select the audio source
4 Basic playback control buttons
5 Adjust the volume (0 (min) to 50 (max))
6 Open/close the sliding door (for discs)
7 WPS pairing button (> 9)
8 Headphone jack
Plug type: 3.5 mm stereo
Recommended plug type: Straight Plug
Listening at full volume for long periods may damage
the user’s ears.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
9 USB port
10 Standby indicator
11 Wi-Fi
®
status indicator
12 Display
13 Sliding door
14 Remote control signal sensor
Distance:
Within approx. 7 m directly in front.
To avoid interference, please do not put any objects in
front of signal sensor.
89
10 11
12 13
14
Top view
RQT9714~body1_mst.fm Page 5 Wednesday, March 7, 2012 10:12 AM
6
RQT9714
Attaching the unit to a wall
(optional)
Supplied accessories
1 Safety holder
1 Screw
2 Wall mount brackets
Commercially available accessories
(not supplied)
4 Wall mount bracket fixing screws
1 Safety holder fixing screw
1 Fall prevention cord
1 Screw eye
Use screws with a nominal diameter of 4 mm, which are
suitable to the material of the wall (e.g., wood, steel, concrete,
etc.)
1 Detach the stand from the unit.
{. Unscrew the fixing screw (2 pieces) at the bottom of the
unit.
{. Gently pull the stand off the unit as illustrated.
Keep the removed screws and stand in a safe place.
2 Measure and mark the position of the wall mount
brackets (Both sides).
{. Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
Installation accessories
Keep the safety holder out of reach of children to
prevent swallowing.
Keep the screws out of reach of children to prevent
swallowing.
Keep the wall mount brackets out of reach of children
to prevent swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
Be sure to install this unit as indicated within
this operating instructions.
Wall mount instructions
Before installation, turn the unit off and disconnect the
AC mains lead from the mains socket.
Before deciding the location to place the unit, be sure
to check that the Wi-Fi
®
signal strength is sufficient.
(> 9, 16)
Bottom of main unit
Stand
Soft blanket or cloth
Fixing screw
232 mm
12.5 mm
300 mm
247 mm
680 mm
65 mm
232 mm
116 mm
118 mm
480 mm
113 mm
15 mm
SC-HC57~RQT9714.book Page 6 Thursday, February 23, 2012 4:13 PM
7
RQT9714
ENGLISH
3 Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
Use a spirit level to ensure both wall mount brackets are
level.
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
4 Fix the safety holder onto the unit with the screw
(supplied).
{. Screw tightening torque: 50 N0cm to 70 N0cm.
5 Attach the fall prevention cord (not supplied) to this
unit.
Use a cord that is capable of supporting over 33 kg
(with a diameter of about 1.5 mm).
6 Hook the unit securely onto the wall mount
brackets with both hands.
Connect the FM antenna and the AC mains lead to the
unit before hanging the unit onto the wall. (> 8)
After hanging the unit, release your hand carefully to
confirm the unit sits securely on the wall.
7 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the
wall.
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
Refer to step 3 for requirements before screwing.
8 Attach the fall prevention cord (not supplied) to the
wall.
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
Make sure that the slack of the cord is minimal.
At least 30 mm
7.5 mm to
9.4 mm
4 mm
Wall mount bracket
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the
wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC57~RQT9714.book Page 7 Thursday, February 23, 2012 4:13 PM
8
RQT9714
Connections
These speakers do not have magnetic shielding. Do not
place them near a television, personal computer or other
devices easily influenced by magnetism.
Tape the antenna to a wall or column in a position with the
least amount of interference. (Use an FM outdoor antenna if
radio reception is poor.)
Inserting or removing media
*1: Make sure to tilt the disc so as not to touch the sliding door.
*2: Do not push or pull the dock manually.
*3: When inserting or removing the iPod/iPhone, tilt the dock
slightly by holding the corner of the dock.
Make sure that the unit does not fall when inserting or
removing media.
Be sure to remove the iPod/iPhone from its case.
When moving this unit, be sure to remove all media and turn
this unit to standby mode.
Insert the USB device directly into the USB port. Do not use
any USB extension cable.
Before removing the USB device, select a source other than
“USB”.
ョヮチモワヵ
ヘブ
モヤチリワ
1
2
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
Connect the AC mains lead after all other connections are complete.
This unit consumes a small amount of AC power (> 19) even when turned off.
To household mains socket
AC mains lead (supplied)
Compatible
iPod/iPhone
(not supplied)
Dock adaptor
(not supplied)
USB device
(not supplied)
RQT9714~body1_mst.fm Page 8 Thursday, March 8, 2012 11:33 AM
9
RQT9714
ENGLISH
AirPlay
With this feature you can wirelessly stream music to
this unit’s speakers.
Compatible devices (as of January 2012)
AirPlay works with;
iOS 4.2 or later (iPod touch (2nd, 3rd, and 4th
generation), iPhone 4S, iPhone 4, iPhone 3GS,
iPad 2, iPad)
iTunes 10.2 or later (Mac / PC)
To use the AirPlay function, this unit must join the
same wireless network as the compatible device.
Preparation
With this unit there are 2 methods to setup the wireless
connection. Determine which type of wireless network
router you are using and follow the method that
matches your device.
Refer to the operating instructions of the wireless
network router for details.
Turn the unit on.
When performing the network settings, place this unit close
to the wireless router.
Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
Immediately after this unit is turned on, the network setup
may take longer to start.
This unit cannot join a wireless network using WEP security
settings with “Method 1”. Use “Method 2” to join the wireless
network.
To cancel this setting in the middle, press [Í] to turn off the
unit.
For up to date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Using the WPS Push Button Configuration
(PBC)
1 Press and hold [s WPS] on the unit.
{. “CONNECT” flashes on the display.
(The Wi-Fi
®
status indicator blinks blue.)
Complete step 2 within 2 mins.
2 Press the WPS button on the wireless router.
{. When a link is established “LINKING” is indicated on
this unit’s display.
{. When the configuration is finished “SUCCESS” is
indicated on this unit’s display. (Wi-Fi
®
status indicator
lights blue.)
3 Press [OK] on the remote control to complete the
setting.
This unit can also be set using the WPS PIN code.
Replace step 2 of “Method 1” with the following steps.
(Before starting, refer to the wireless network router’s
operating instructions for details on how to enter the PIN
code.)
1 While “CONNECT” is flashing press and hold [s WPS]
again to display the 8 digit PIN code. (Wi-Fi
®
status
indicator blinks purple.)
2 Enter the PIN code into the wireless router.
To edit this system’s name it is necessary to use “Method 2”.
“FAIL” may be displayed if the connection was not made
within the set time limit. Try the setting again. If “FAIL” is still
displayed, try “Method 2”.
With this method, you will access this unit’s wireless
network settings from the Internet browser of your
compatible device.
The illustrations and explanations are based on an iPhone.
However, the word “iPhone” can be replaced with your
compatible device.
Preparation
Check your home wireless network name
(Network name (SSID)) and password for this
network. This can often be found on the wireless
router itself.
Turn on your iPhone.
(Continues to next page)
*1: WPS stands for “Wi-Fi Protected Setup
TM
”.
Network settings
If you do not know which type of wireless network
router you are using, use “Method 2”.
Method 1
If your wireless network router supports WPS*
1
.
WPS Push Button Configuration
(PBC) compatible wireless router
may have this mark.
Method 2
If your wireless network router does not support
WPS*
1
.
SC-HC57~RQT9714.book Page 9 Thursday, February 23, 2012 4:13 PM
10
RQT9714
1 Press [SETUP] on the remote control repeatedly to
select “NET SETUP” and then press [OK].
{. “SETTING” is indicated on the display.
(The Wi-Fi
®
status indicator blinks purple.)
2 Connect your iPhone to this unit’s wireless
network called “Setup _ _ _ _ _ _”*
1, 2
.
Once “Setup _ _ _ _ _ _” is selected, the iPhone is
connected with this unit.
3 Start Safari on your iPhone and type
http://192.168.1.12/” into the URL address field
and display the page.
{. This unit’s setup window is displayed.
4 Select “Search wireless network”.
5 Select and input the details.
6 Perform the “Additional settings”. (> right)
If they do not apply, continue to the next step.
7 Select “JOIN” to apply the settings.
{. In the pop-up screen select “OK” to continue.
Select “CANCEL” to return to the setup window.
{. The wireless status indicator lights blue.
You can now close the Safari browser.
{. When the configuration is finished “SUCCESS” is
indicated on this unit’s display.
8 Press [OK] on the remote control to complete the
settings.
9 Connect your iPhone back to your home wireless
network.
Enable Java and Cookies in your browser settings.
To cancel this setting in the middle, press [Í] to turn off the
unit.
*1: “ _ ” stands for a digit that is unique to each set.
*2: Make sure that DHCP is enabled for the network setting on
the iPhone.
*3: If you have set your wireless network to be invisible, select
“BACK” and refer to “Alternative settings”. (> above)
[1] Select your home wireless network name.*
3
[2] Type the password.
[3] Select “NEXT”.
3
If “FAIL” is displayed press [OK]. Then check the
wireless network password and other settings and
start again from step 1.
Alternative settings
Instead of steps 4 and 5:
Select “Manual settings”.
1 Type your home wireless network name into
the “Network name (SSID)” field.
2 Select the encryption method from the
“Security system” drop down list.
3 Type the password into the “Password” field
and then select “NEXT”.
Additional settings
In step 6:
If your home wireless network has been setup to
use specific IP Addresses, Subnet Mask, Default
Gateway, Primary DNS, etc.
Select “Advanced network settings”.
{. Input the required addresses into each field and select
“OK”.
To change the settings back to DHCP, select “ON” from
the “DHCP” drop down list.
If you want to change the name of this unit that is
displayed as the AirPlay speakers.
Select “Edit STEREO SYSTEM name”.
{. Only ASCII characters can be used.
{. Type a new name into the “STEREO SYSTEM name”
field and select “OK”.
SC-HC57~RQT9714.book Page 10 Thursday, February 23, 2012 4:13 PM
11
RQT9714
ENGLISH
When this unit is on the same network as the
compatible device, you can select this unit as the
speakers.
Preparation
Connect this unit to the same network as the
compatible device. (> 9)
Turn on the compatible device.
1 Start iTunes on your Mac/PC or the Music App on
your iOS device.
If the Music App on your iOS device is used,
select the file that is to be played.
2 Select this unit from the AirPlay icon at the
bottom right-hand corner of the display.
{. Check the volume settings before starting the playback.
(When AirPlay is used for the first time, the volume may
be output at the maximum setting.)
If you have not changed the name, this unit will be
displayed as “Panasonic HC57 _ _ _ _ _ _”
*
1, 2
.
3 Start play.
This unit can be set to turn on automatically when this unit is
selected as the output speakers. (> 16)
Playback of other audio sources will stop and AirPlay output
will have priority.
Volume changes on the iOS device or iTunes will be applied
to this unit. (Refer to the iTunes Help for the required settings
in iTunes.)
With some iOS and iTunes versions, it may not be possible
to restart the AirPlay playback if the selector is changed
(e.g., “CD”) or the unit is turned off, during the AirPlay
playback.
In this case, select a different device from the AirPlay icon of
the Music App or iTunes and then re-select this unit as the
output speakers.
AirPlay will not work when playing back videos on iTunes.
Playback operations
The following marks indicate the availability of the
feature.
Preparation
Turn the unit on.
Insert the media. (> 8)
Press [CD], [iPod] or [USB] to select the audio
source.
(Continues to next page)
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this unit can be changed
from the “Edit STEREO SYSTEM name” settings in
“Method 2”. (> 10)
Using AirPlay with this
unit’s speakers
e.g., iPhone iOS 5.0
Computer
Multiple Speakers...
Panasonic HC57
------
e.g., iTunes 10.5
(Bottom right)
[CD]: CD audio in CD-DA format and a CD that
contains MP3 files (> 4)
[iPod]: Compatible iPod/iPhone (> 4)
[USB]: USB devices containing MP3 files (> 4)
[AirPlay]:
When connected to an AirPlay compatible
device. (>
left)
Basic play ([CD], [iPod], [USB],
[AirPlay])
Play
([CD], [iPod], [USB]
only)
Press [1/;].
Stop Press [].
[USB]: The track is memorises and
“RESUME” is displayed.
Pause Press [1/;].
Press again to restart play.
[AirPlay]: If play does not restart, wait
approx. 10 sec. and try again.
Skip Press [:/6] or [5/9] to
skip track.
[CD], [USB] Press [3] or [4] to skip
the MP3 album.
Search
([CD], [iPod], [USB]
only)
During playback
Press and hold [:/6] or
[5/9].
[iPod]: Backwards search is only
within the current track.
Volume Press [VOL s] or [VOL r] to adjust
the volume.
Mute Press [MUTE] to mute the sound.
SC-HC57~RQT9714.book Page 11 Thursday, February 23, 2012 4:13 PM
12
RQT9714
[CD], [USB] View contents information
Press [DISPLAY] repeatedly during play or pause.
Maximum number of displayable characters: approx. 30
This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data
that is not supported will not be displayed or shown
differently.
Album and track indication for MP3 files.
[iPod] To navigate through the iPod/iPhone
menu
Open the Music App to use this feature with iPod touch/
iPhone models.
–[3, 4]: To navigate menu items.
[OK]: To go to the next menu.
[iPod MENU]: To return to the previous menu.
To view the operation, open the sliding door.
The operation may vary among iPod/iPhone models.
Select the playback mode.
These modes can be combined with random play and the
repeat play feature.
1 Press [PLAY MENU] repeatedly to select
“PLAYMODE”.
2 Press [3, 4] to select the following mode and
press [OK].
3 Press [1/;] to start play.
[CD]: The current play mode is cleared when you open the
sliding door for discs.
Select the playback mode.
This mode can be combined with the playback modes and
the repeat play feature.
When “CD” or “USB” is selected
1 Press [PLAY MENU] repeatedly to select
“RANDOM” and then press [OK].
2 Press [3, 4] to select “ON” and press [OK].
“RND” is displayed.
3 Press [1/;] to start play.
When “AIRPLAY” is selected
1 Press [PLAY MENU] repeatedly to select
“SHUFFLE” and then press [OK].
2 Press [3, 4] to turn shuffle on and press [OK].
[AirPlay]: Refer to the connected device to verify the
selected setting.
[CD], [USB]: During random play, you cannot skip to the
previous track.
[CD]: The current play mode is cleared when you open the
sliding door for discs.
[CD], [USB]: “RND” will not be displayed when “1-TRACK”
(> 13) is selected.
[AirPlay]: Perform the settings during playback.
[AirPlay]: The applied settings will remain until it is changed
on the connected device.
“A _ _ _”: MP3 album number.
“T _ _ _”: MP3 track number.
“ _ ” stands for the album or track number.
“”:
This indication is also used to refer to an album.
“”:
This indication is also used to refer to a track.
Playback modes ([CD], [USB])
DISC Play all MP3 tracks.
1-ALBUM
(“1, ” is
displayed.)
Only plays the selected MP3
album.
Random/shuffle play
([CD], [USB], [AirPlay])
RQT9714~body1_mst.fm Page 12 Thursday, March 1, 2012 3:00 PM
13
RQT9714
ENGLISH
These modes can be combined with the playback
modes and random play feature.
1 Press [PLAY MENU] repeatedly to select
“REPEAT” and then press [OK].
2 Press [3, 4] to select the following mode and
press [OK].
[AirPlay]: Refer to the connected device to verify the
selected setting.
[CD]: Repeat play is cancelled when you open the sliding
door for discs.
[AirPlay]: Perform the settings during playback.
[AirPlay]: The applied settings will remain until it is changed
on the connected device.
Listening to the radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected. (> 8)
A station previously stored is overwritten when another station
is stored in the same channel preset.
1 Press [RADIO] to select “FM”.
2 Press [PLAY MENU] repeatedly to select
“A.PRESET” and then press [OK].
3 Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
Preparation
1 Press [RADIO] to select “FM”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE” and then press [OK].
3 Press [3, 4] to select “PRESET” and then press
[OK].
1 Press [RADIO] to select “FM”.
2 Press [:/6] or [5/9] to select the
channel.
Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE” and then press [OK].
3 Press [3, 4] to select “MANUAL” and then press
[OK].
4 Press [:/6] or [5/9] to tune to the
required station.
To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
(Continues to next page)
Repeat play ([CD], [USB],
[AirPlay])
OFF Select to cancel repeat playback.
1-TRACK
([CD], [USB]:
“1, , `” is
displayed.)
The selected track is repeated,
(Skip to the desired track (> 11))
ALL
([CD], [USB]:
`” is
displayed.)
All tracks are repeated.
Presetting stations
automatically
Listening to a preset channel
RQT9714~body1_mst.fm Page 13 Thursday, March 1, 2012 1:55 PM
14
RQT9714
To preset the channel
5 While listening to the radio broadcast
Press [OK].
6 Press [3, 4] to select the channel and then press
[OK].
To improve FM sound quality
1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”
and then press [OK].
2 Press [3, 4] to select “MONO” and then press
[OK].
This setting can be preset and memorised. To do so,
continue to step 5 of “Manual tuning and presetting”.
Select “STEREO” in step 2 to return to stereo broadcasts.
“MONO” is cancelled if the frequency is changed.
If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed. (> below)
To display the current signal status
Press [PLAY MENU] to display “FM STATUS” and
then press [OK].
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
“FM” is also displayed even if this unit is not tuned to a
station.
To display RDS text data
Press [DISPLAY] to display the text data.
Each time you press the button:
PS: Programme service
PTY: Programme type
FREQ: Frequency display
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
The unit can display the text data transmitted by the radio
data system (RDS) available in some areas. (RDS displays
may not be available if reception is poor.)
Internet Radio
This unit can output Internet radio if “vTuner for
Panasonic” is installed on your iPhone/iPod touch.
Preparation
Install “vTuner for Panasonic” to your iPhone/iPod
touch.
Install iOS 5.0 or later.
1 Insert the iPhone/iPod touch to this unit.
2 Press [iPod] repeatedly to select “VTUNER”.
{. “vTuner for Panasonic” starts.
Visit the below website for the following information about
“vTuner for Panasonic”:
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software
versions, purchasing, installation and operation details.)
A pop-up screen may appear on your iPhone/iPod touch.
Follow the indicated instructions.
Sound adjustment
The following sound effects can be added to the audio
output.
1 Press [SOUND] repeatedly to select the effect and
then press [OK].
2 Press [3, 4] to select the setting and then press
[OK].
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
Clock and Timer
This is a 24-hour clock.
1 Press [SETUP] repeatedly to select “CLOCK” and
then press [OK].
2 Press [3, 4] to set the time and then press [OK].
To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
The clock is reset when there is a power failure or when the
AC mains lead is removed.
Reset the clock regularly to maintain accuracy.
Direct-Vocal
Surround
(
D.SURROUND
)
“LEVEL 1”, “LEVEL 2” or “OFF”.
The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL
(vocal) or “FLAT” (flat/off).
The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (j4 to i4).
Dynamic Bass
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
The factory preset is
“ON D.BASS”.
Setting the clock
SC-HC57~RQT9714.book Page 14 Thursday, February 23, 2012 4:13 PM
15
RQT9714
ENGLISH
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock (> 14).
Setting the timer
1 Press [SETUP] repeatedly to select
“TIMER ADJ” and then press [OK].
2 Press [3, 4] to set the starting time
(“ON TIME”) and then press [OK].
3 Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
The music source and volume will also be displayed if the
timer is turned on. (> below)
Turn the timer on
1 Select the music source*
1
and set the desired
volume.
2 Press [SETUP] repeatedly to select
“TIMER SET” and then press [OK].
3 Press [3, 4] to select “SET” and then press [OK].
F” is displayed.
4 Press [Í] to turn the unit off.
*1: “CD”, “USB”, “IPOD” and “FM” can be set as the music
source.
This unit can be used as normal after the timer is set,
however:
Turn the unit to standby mode before the timer start time.
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
To turn the timer off, select “OFF” in step 3.
The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1 Press [SETUP] repeatedly to select “SLEEP” and
then press [OK].
2 Press [3, 4] to set the time (in minutes) and then
press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^------------------------. OFF (Cancel) (------------------------J
The remaining time is indicated on the unit’s display except
when other operations are performed.
The play timer and sleep timer can be used together. The
sleep timer always has priority.
Others
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for 30 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select “AUTO OFF”
and then press [OK].
2 Press [3, 4] to select “OFF” and then press [OK].
To turn automatic standby on, select “ON” in step 2.
This setting cannot be selected when “FM” is the source.
The brightness of this unit’s display can be changed.
1 Press [SETUP] repeatedly to select “DIMMER”
and then press [OK].
2 Press [3, 4] to select “ON” and then press [OK].
To cancel the dimmer, select “OFF” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1 Press [CD] to select “CD”.
2 Press and hold [CD] on the main unit and [3] on
the remote control until the main unit’s display
shows “REMOTE 2”.
3 Press and hold [OK] and [3] on the remote control
for at least 4 seconds.
To change the mode back to “REMOTE 1”, repeat the steps
above by replacing [3] with [4].
Play timer
Sleep timer
Automatic standby
Display brightness
Changing the main unit and
remote control code
SC-HC57~RQT9714.book Page 15 Thursday, February 23, 2012 4:13 PM
16
RQT9714
Occasionally, Panasonic may release updated
software for this unit that may add or improve the way
a feature operates. These updates are available free of
charge.
Preparation
Connect this unit to the wireless network. (> 9)
Make sure that the wireless network is connected to the
Internet.
1 Press [SETUP] repeatedly to select
“SW UPDATE” and then press [OK].
2 Press [3, 4] to select “UPDATE? Y” and then
press [OK] to start the update.
{. After the update has finished, “SUCCESS” is displayed.
3 Disconnect the AC mains lead and reconnect it
after 3 minutes.
DO NOT DISCONNECT the AC mains lead while one of
the following messages is displayed.
“LINKING”, “UPDATING” or “%”
(“ ” stands for a number.)
If you do not want to update the unit, select “UPDATE? N”
and then press [OK] in step 2.
If there are no updates, “NO NEED” is displayed after step 2.
During the update process, no other operations can be
performed.
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
Checking the software version
1 Press [SETUP] repeatedly to select “SW VER.” and then
press [OK].
{. The version of the installed software is displayed.
2 Press [OK] to exit.
To check the Wi-Fi
®
signal strength where the unit is
located.
Preparation
Connect this unit to the wireless network. (> 9)
1 Press [SETUP] repeatedly to select “SIG.LEVEL”
and then press [OK].
The unit’s display shows “LEVEL ”.
(“ ” stands for a number.)
2 Press [OK] to exit this display mode.
It is recommended to have a signal strength of “3”. Change
the position or angle of your wireless network router or the
unit if the indication is “2” or “1” and see if the connection
improves.
If “LEVEL 0” is displayed, this unit cannot establish a link with
the wireless network router. (> 18)
This function does not work when AirPlay is used.
This unit can turn on automatically from standby mode
when this unit is selected as the AirPlay speakers.
Preparation
Connect this unit to the wireless network. (> 9)
1 Press [SETUP] repeatedly to select “NET STNBY”
and then press [OK].
2 Press [3, 4] to select “ON” and then press [OK].
To cancel this function, select “OFF” in step 2.
The factory preset is “OFF”. If this function is set to “ON” the
standby power consumption will increase.
To check the unit’s IP/MAC address.
1 Press [CD] to select “CD”.
2 Press and hold [s WPS] on the unit and [4] on
the remote control until the unit’s display shows
the IP address.
{. The IP address is partially displayed.
To display the MAC address on the unit, repeat the
steps above by replacing [4] with [3].
3 Press [3, 4] on the remote control to show the
rest of the IP address.
Be sure to remove the disc from the disc tray when checking
the address.
The “ – ” displayed on the top or bottom left of the display
indicate the first and last units respectively.
Software update
Wi-Fi
®
signal strength
Network standby
IP/MAC Address
SC-HC57~RQT9714.book Page 16 Thursday, February 23, 2012 4:13 PM
17
RQT9714
ENGLISH
Troubleshooting
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if
the solutions indicated in the following guide do not
solve the problem, consult your dealer for instructions.
Do you have the latest software installed?
Occasionally, Panasonic may release updated software for this
unit that may add or improve the way a feature operates. (> 16)
Humming heard during play.
An AC mains lead or fluorescent light is near the cords. Keep
other appliances and cords away from this unit’s cables.
MP3 cannot be read.
You may not be able to play MP3 if you have copied a
multi-session disc that has no data between sessions.
When creating a multi-session disc, it is necessary to close the
session.
The amount of data on the disc is too small. Set the amount of
data to above 5 MB.
Incorrect display or play will not start.
Make sure that the disc is compatible with this unit.(> 4)
There is moisture on the lens. Wait for about an hour and then try
again.
No response when [1/;] is pressed.
Disconnect the USB device and then reconnect it. Alternatively,
turn the unit off and on again.
The USB drive or its contents cannot be read.
The USB drive format or its contents is/are not compatible with the
unit. (> 4)
The USB host function of this product may not work with some
USB devices.
Slow operation of the USB flash drive.
Large file size or high memory USB flash drive takes longer time
to read.
The elapsed time displayed is different from the
actual play time.
Copy the data to another USB device or backup the data and
reformat the USB device.
A beat sound or noise is heard while receiving
radio broadcast.
Confirm the FM antenna is properly connected. (> 8)
Adjust the position of the antenna.
Try to keep a certain amount of distance between the antenna and
AC mains lead.
Try to use outdoor antenna if there are buildings or mountains
nearby.
Switch the television or other audio player off or separate it from
the unit.
Keep this unit away from mobile phones if the interference is
apparent.
Cannot charge or operate.
Check that the iPod/iPhone is connected firmly. (> 8)
The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
When unexpected operation occurs while using the iPod/iPhone,
connect the iPod/iPhone again or try to restart the iPod/iPhone.
Cannot connect to the network.
Confirm the network connection and settings. (> 9)
Your wireless network might be set to be invisible. In this case
select “Manual settings” in “Method 2”. (> 10)
This unit cannot join a wireless network using WEP security
settings with the WPS methods (“Method 1”). Use “Method 2” to
join the wireless network. (> 9)
Make sure that the multicast function on the wireless network
router is set to on (enabled).
Cannot connect to the unit.
Make sure that this unit is on the same wireless network as the
device you are trying to use. (> 9)
If “NET STNBY” is set to “OFF”, the AirPlay compatible device
cannot be connected when this unit is off.
Turn off the Wi-Fi
®
setting on the AirPlay compatible device, set
“NET STNBY” to “OFF” (> 16) and then turn this unit off and on.
Reconnect the compatible device to the Wi-Fi
®
network and then
select this unit as the AirPlay speakers again.
My wireless network router is WPS PBC
compatible, but the pairing does not work.
If the network is set to be invisible, the push button configuration
does not work. In this case, either make the wireless network
visible while you set up the network for this unit or use “Method 2”.
(> 9)
Playback does not start.
The sound is interrupted.
Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
Do not place this unit inside a metal cabinet, for it might block the
Wi-Fi
®
signal.
To return all settings to the factory preset
When the following situations occur, reset the
memory:
There is no response when buttons are pressed.
You want to clear and reset the memory contents.
1 Disconnect the AC mains lead. (Wait for at least
3 minutes before proceeding to step 2.)
2 While pressing and holding down [Í/I] on the
main unit, reconnect the AC mains lead.
“--------” appears on the display.
3 Release [Í/I].
All the settings are returned to the factory preset. You will
need to reset the memory items.
Common problems
Disc operations
USB operations
Radio
iPod/iPhone operations
AirPlay operations
SC-HC57~RQT9714.book Page 17 Thursday, February 23, 2012 4:13 PM
18
RQT9714
Place this unit closer to the wireless network router.
If several wireless devices are simultaneously using the same
wireless network as this unit, try turning off the other devices or
reducing their wireless network usage.
If the playback stops, check the playback status on the iOS device
or iTunes.
If play does not start (even though the Wi-Fi
®
status indicator
lights blue and the AirPlay icon is displayed), restart the
wireless network router, turn the Wi-Fi
®
connection on the iOS
device or Mac/PC off and on, and then make sure that your home
wireless network is selected.
If the AirPlay icon is not displayed even if Wi-Fi
®
status
indicator lights blue, try restarting the wireless network router.
With some iOS and iTunes versions, it may not be possible to
restart the AirPlay playback if the selector is changed (e.g., “CD”)
or the unit is turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the
Music App or iTunes and then re-select this unit as the output
speakers. (> 11)
The remote control doesn't work properly.
The remote control and this unit are using a different code.
(> right, “REMOTE ”)
The following messages or service numbers may
appear on the unit's display.
“--:--”
You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (> 14).
“ADJUST CLOCK”
Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
The unit has been left unused for about 30 minutes and will shut
down in a minute. Press any button to cancel it.
CANNOT DISPLAY
The Wi-Fi
®
signal strength cannot be displayed if “AIRPLAY” is the
selected source. Stop the AirPlay playback, select a different
source (e.g., “CD”) and try again. (> 16)
“CANNOT SET”
Select an audio source other than “AIRPLAY” or “VTUNER”.
“CHECKING CONNECTION”
The unit is checking the connected iPod/iPhone. If this display
keeps appearing, make sure that iPod/iPhone is inserted correctly
and try again (> 8).
“DL ERROR”
The software download has failed. Press any button to exit.
Please try again later.
The server cannot be found. Press any button to exit. Make sure
that the wireless network is connected to the Internet.
“ERROR”
Incorrect operation is performed. Read the instructions and try
again.
“F61”
There is a power supply problem. Consult the dealer.
“FAIL”
Updating or setting has failed. Read the instructions and try again.
“ILLEGAL OPEN”
Sliding door is not in correct position. Turn the unit off and on
again. If this display appears again, consult the dealer.
“IPOD OVER CURRENT ERROR”
The iPod/iPhone is drawing too much power. Remove the iPod/
iPhone and turn the unit off and on again.
“LEVEL 0”
There is no link between this unit and the wireless network router.
Try the following operations:
Check that the wireless network router is turned on.
Turn this unit off and on again.
Reset the wireless network settings. (> 9)
If the problem persists, consult your dealer.
“NOCONNECT”
This unit cannot connect to the network.
Check the network connection. (> 9)
“NODEVICE”
The iPod/iPhone device is not inserted correctly. Read the
instructions and try again (> 8).
The USB device is not inserted. Check the connection.
“NO DISC”
Insert the disc to be played (> 8).
“NO PLAY”
A CD that is not in CD-DA or MP3 format is inserted. It cannot be
played.
If there are more than 255 albums or folders (audio and
non-audio), some of the MP3 files in these albums may not be
read and played. Transfer these music albums to another USB.
Alternatively, reformat the USB device and save these music
albums prior to saving the other non-audio folders.
“NOT SUPPORTED”
You have inserted an iPod/iPhone that cannot be played (> 4).
Insert correctly and try again if iPod/iPhone is compatible.
If the iPod/iPhone is compatible, turn it on before inserting it to this
unit.
“READING”
The unit is checking the CD information. After this display has
disappeared, start operating.
“START ERROR”
Check the iPhone/iPod touch.
Visit the below website for more information:
http://radio.vtuner.com/panasonic/en/
“REMOTE ” (“ ” stands for a number.)
The remote control and this unit are using different codes. Change
the code on the remote control.
When “REMOTE 1” is displayed, press and hold [OK] and
[4] for more than 4 seconds.
When “REMOTE 2” is displayed, press and hold [OK] and
[3] for more than 4 seconds.
“USB OVER CURRENT ERROR”
The USB device is drawing too much power. Switch to “CD”
mode, remove the USB and turn the unit off.
Remote control
Messages
RQT9714~body1_mst.fm Page 18 Wednesday, March 7, 2012 9:50 AM
19
RQT9714
ENGLISH
Specifications
GENERAL
AMPLIFIER SECTION
TUNER SECTION
TERMINAL SECTION
DISC SECTION
SPEAKER SYSTEM SECTION
Wi-Fi
®
/ AirPlay SECTION
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Total harmonic distortion is measured by a digital spectrum
analyzer.
Power consumption 29 W
Power consumption in standby mode
Approx. 0.2 W
Power consumption in standby mode
(When “NET STNBY” is “ON”)
Approx. 11 W
Power supply AC220Vto240V,50Hz
Dimensions (WkHkD)
480 mmk197 mmk84 mm
(Depth without stand 75 mm)
Mass Approx. 2.6 kg
Operating temperature range 0 oC to r40 oC
Operating humidity range
35 % to 80 % RH (no condensation)
Output power
RMS Output Power Stereo mode
Front Ch (both ch driven)
20 W per channel (6 ), 1 kHz, 10 % THD
Total RMS Stereo mode power 40 W
Preset Memory FM 30 stations
Frequency Modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75 (unbalanced)
USB Port
USB Standard USB 2.0 full speed
Media file format
support
MP3 (¢.mp3)
USB device file system FAT12, FAT16, FAT32
USB port power DC OUT 5 V 500 mA MAX
iPod Connector DC OUT 5V1.0AMAX
Phone jack
Terminal Stereo, 3.5 mm jack
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3*)
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Wavelength 790 nm (CD)
Laser power CLASS 1
[NORSK]
Bølgelengde 790 nm (CD)
Laserstyrke Klasse 1
Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
Audio output (Disc)
Number of channels 2 ch (FL, FR)
Type
1 way, 1 speaker system (Passive Radiator)
Speaker unit(s)
Full range
6.5 cm Cone typek1 per channel
Passive Radiator 8cmk2 per channel
Impedance 6
Wi-Fi
®
WLAN Standards IEEE802.11b/g
Frequency range
2.4 GHz band
Security WEP, WPA
TM
, WPA2
TM
WPS version Version 2.0 (WEP not support)
SC-HC57~RQT9714.book Page 19 Thursday, February 23, 2012 4:13 PM
20
RQT9714
Unit and media care
Pull out the AC mains lead from the outlet before
maintenance.
Clean this unit with a soft, dry cloth
When dirt is heavy, wring a cloth moistened in water tightly to
wipe the dirt, and then wipe it with a dry cloth.
When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials (towels, etc.) that can
fall apart. Small grains may get stuck inside the speaker
cover.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Maintenance of the lens
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc handling precautions
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or
labels (rented discs etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes.
To dispose or transfer this unit
The unit may keep the user settings information in the
unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory presets to delete the user
settings. (> 17, “To return all settings to the factory
preset”)
The operation history may be recorded in the
memory of this unit.
Licenses
Clean the lens regularly to prevent malfunctions. Use a
blower to remove dust and a cotton swab if it is extremely
dirty.
You cannot use a CD type lens cleaner.
Do not leave the sliding door open for prolonged periods
of time. This will cause the lens to get dirty.
Be careful not to touch the lens with your fingers.
DO DO NOT
Lens
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic,
iPod nano, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi
Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are
marks or registered marks of the Wi-Fi Alliance.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
SC-HC57EG~RQT9714-2R.book Page 20 Wednesday, April 18, 2012 4:43 PM
1 / 1

Panasonic SCHC57EG Návod na používanie

Kategória
Inteligentné hodinky
Typ
Návod na používanie