Electrolux EIP8546 Používateľská príručka

EIP8546

EN Hob User Manual 2

TH เตาฝง คูมือการใชงาน 24

VI Bếp Hướng dẫn Sử dụng 44

CONTENTS

1. SAFETY INFORMATION....................................................................................2

2. SAFETY INSTRUCTIONS..................................................................................4

3. INSTALLATION.................................................................................................. 7

4. PRODUCT DESCRIPTION................................................................................ 8

5. DAILY USE.........................................................................................................9

6. FLEXIBLE INDUCTION COOKING AREA....................................................... 13

7. HINTS AND TIPS............................................................................................. 16

8. CARE AND CLEANING....................................................................................18

9. TROUBLESHOOTING......................................................................................19

10. TECHNICAL DATA.........................................................................................21

11. ENERGY EFFICIENCY.................................................................................. 22

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can

be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.electrolux.com/support

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damage that are the result

www.electrolux.com2

of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts

may become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

ENGLISH 3

• CAUTION: The appliance must not be supplied

through an external switching device, such as a timer,

or connected to a circuit that is regularly switched on

and off by a utility.

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use the appliance before installing it in the

built-in structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and

do not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

www.electrolux.com4

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware falling from the

appliance when the door or the

window is opened.

• Each appliance has cooling fans on

the bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be

pulled in, as they can damage the

cooling fans or impair the cooling

system.

– Keep a distance of minimum 2 cm

between the bottom of the

appliance and parts stored in the

drawer.

• Remove any separator panels

installed in the cabinet below the

appliance.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• This appliance is for household use

only.

ENGLISH 5

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the

glass surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

www.electrolux.com6

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

3.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable,

use the cable type: H05V2V2-F which

withstands a temperature of 90 °C or

higher. Speak to your local Service

Centre.

3.4 Assembly

min.

50mm

min.

500mm

If the appliance is installed

above a drawer, the hob

ventilation can warm up the

items stored in the drawer

during the cooking process.

www.youtube.com/electrolux

www.youtube.com/aeg

How to install your Electrolux

Induction Hob - Worktop installation

ENGLISH 7

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

1

2

1

3

1

Induction cooking zone

2

Control panel

3

Flexible induction cooking area

consisting of four sections

4.2 Control panel layout

6 7 8

10

1

11

2

345

9

To see the control panel and the zone positions activate the appliance with

Use the sensor fields to operate the appliance. The displays, indicators and sounds

tell which functions operate.

Sen‐

sor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Hob²Hood To activate and deactivate the manual

mode of the function.

3

Pause To activate and deactivate the function.

4

/

- To increase or decrease the time.

5

- To set the timer function.

6

- Timer display To show the time in minutes.

7

FlexiBridge (Flexible

Bridge)

To switch between three modes of the

function.

www.electrolux.com8

Sen‐

sor

field

Function Comment

8

PowerSlide To activate and deactivate the function.

9

- Control bar To set a heat setting.

10

PowerBoost To activate the function.

11

Lock / Child Safety De‐

vice

To lock / unlock the control panel.

4.3 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicators show the level of the

residual heat for the cooking zones you

are currently using. When the hob is

deactivated, the indicators are still

visible. When the hob is cold enough,

they disappear. The indicators may also

come on for the neighbouring cooking

zones even if you are not using them.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

The control bars come on after you

activate the hob and go off after you

deactivate the hob.

When the hob is deactivated you can

only see .

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• you do not place any cookware on the

hob for 50 seconds,

• you do not set the heat setting for 50

seconds after you place the

cookware,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth). When you

hear the acoustic signal, the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you do not deactivate a cooking zone

or change the heat setting. After some

time, the hob deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

ENGLISH 9

5.3 Using the cooking zones

CAUTION!

Do not place hot cookware

on the control panel. There

is a risk of damage to the

electronic parts.

Place the cookware in the centre of the

selected zone. Induction cooking zones

adapt to the dimension of the bottom of

the cookware automatically.

Once the pot is detected, the heat setting

0 comes on.

5.4 The heat setting

Touch the control bar at the desired heat

setting or move your finger along the

control bar to set or change the heat

setting for a cooking zone.

Once you place a pot on the cooking

zone and set the heat setting, it remains

the same for 50 seconds after you

remove the pot. The control bar blinks for

the second half of that time. If you place

the pot on the cooking zone again within

this time, the heat setting reactivates.

Otherwise the cooking zone deactivates.

5.5 Power management

function

• Cooking zones are grouped according

to the location and number of the

phases in the hob. See the illustration.

• Each phase has a maximum

electricity loading of 3680 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3680 W.

• The function decreases the power of

the other cooking zones connected to

the same phase.

• For cooking zones that have a

reduced power, the control panel

shows the maximum possible heat

settings.

• If a higher heat setting is not available

reduce it for the other cooking zones

first.

• The activation of the function depends

on the number and size of pots.

5.6 PowerBoost

This function activates more power for

the appropriate induction cooking zone,

depending on the cookware size. The

function can be activated only for a

limited period of time.

Touch to activate the function for the

cooking zone.

The function deactivates automatically.

For maximum duration

values, refer to "Technical

data".

www.electrolux.com10

5.7 Timer

Count Down Timer

Use this function to specify how long a

cooking zone should operate during a

single cooking session.

First set the heat setting, then set the

function.

1. Touch

to activate the function or

change the time.

The timer digits and the indicators

and come on the display.

If the timer is not set, and

disappear after 3 seconds.

2. Touch or to set the time (00 -

99 minutes).

After 3 seconds, the timer starts to count

down automatically. The indicators

,

and disappear.

When the time comes to an end, a signal

sounds and flashes. To stop the

signal, touch .

To deactivate the function: touch . The

indicators and come on. Use or

to set on the display.

Alternatively, set the heat level to 0. As a

result, a signal sounds and the timer is

cancelled.

Minute Minder

You can use this function when the hob

is activated but no cooking zone

operates.

Place a pot on a cooking zone to see

symbol.

1. Touch to activate the function.

2. Touch

or to set the time.

The function starts automatically after 4

seconds.

When you set the function, you can

remove the pot.

When the time comes to an end, a signal

sounds and

flashes. Touch to

stop the signal.

To deactivate the function: touch . The

indicators and light up. Use or

to set on the display.

The function has no effect

on the operation of any

cooking zone.

5.8 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function is active, , or

symbols can be used.

Touch

to activate the function.

The heat setting is lowered to 1.

To deactivate the function, touch . The

previous heat setting comes on.

5.9 Lock

You can lock the control panel while the

hob operates. It prevents an accidental

change of the heat setting.

Set the heat setting first.

Touch to activate the function.

To deactivate the function, touch .

When you deactivate the

hob, you also deactivate this

function.

5.10 Child Safety Device

This function prevents an accidental

operation of the hob.

Activate the hob first and do not set the

heat setting.

Touch until signal sounds and the

indicator comes on to activate the

function.

The control bars disappear. Deactivate

the hob.

When you deactivate the

hob, the function is still

active.

To deactivate the function for only

one cooking time: Activate the hob with

. comes on. Touch until signal

ENGLISH 11

sounds and the indicator comes off. The

control bar appears. Set the heat setting

within 50 seconds.You can operate the

hob. When you deactivate the hob with

the function is still active.

To deactivate the function

permanently: Activate the hob and do

not set the heat setting. Touch until

signal sounds and the indicator comes

off. The control bars appear. Deactivate

the hob.

5.11 OffSound Control

(Deactivating and activating the

sounds)

Deactivate the hob first.

1. Touch for 3 seconds to activate

the function.

The display comes on and goes out.

2. Touch for 3 seconds.

or comes on.

3. Touch of the timer to choose one

of the following:

• - the sounds are off

• - the sounds are on

4. Wait until the hob deactivates

automatically to confirm your

selection.

When the function is set to you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

5.12

Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. Speed

of the fan is defined automatically on the

basis of the mode setting and

temperature of the hottest cookware on

the hob. You can also operate the fan

from the hob manually.

For most of the hoods, the

remote system is originally

deactivated. Activate it

before you use the function.

For more information refer to

the hood user manual.

Operating the function automatically

To operate the function automatically set

the automatic mode to H1 - H6. The hob

is originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes the temperature of the

cookware automatically and adjusts the

speed of the fan.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the

hob. To do so set the automatic mode to

H1 - H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

Automatic modes

Auto‐

matic

light

Boil‐

ing

1)

Frying

2)

Mode H0 Off Off Off

Mode H1 On Off Off

Mode H2

3)

On Fan

speed 1

Fan

speed 1

Mode H3 On Off Fan

speed 1

Mode H4 On Fan

speed 1

Fan

speed 1

Mode H5 On Fan

speed 1

Fan

speed 2

www.electrolux.com12

Auto‐

matic

light

Boil‐

ing

1)

Frying

2)

Mode H6 On Fan

speed 2

Fan

speed 3

1)

The hob detects the boiling process and

activates the fan speed in accordance with

the automatic mode.

2)

The hob detects the frying process and

activates the fan speed in accordance with

the automatic mode.

3)

This mode activates the fan and the light

and does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds.

The display comes on and goes off.

3. Touch for 3 seconds.

4. Touch

a few times until comes

on.

5. Touch of the Timer to select an

automatic mode.

When you finish cooking and deactivate

the hob, the hood fan may still operate

for a certain period of time. After that

time the system deactivates the fan

automatically and prevents you from an

accidental activation of the fan for the

next 30 seconds.

To operate the hood directly

on the hood panel deactivate

the automatic mode of the

function.

Operating the fan speed

manually

You can also operate the fan from the

hob manually.

Touch

when the hob is active.

This deactivates automatic operation of

the function and allows you to change

the fan speed manually.

When you press , you raise the fan

speed by one. When you reach an

intensive level and press again, you

set the fan speed to 0 which deactivates

the hood fan. To start the fan again with

the fan speed 1 touch

.

To activate an automatic

operation of the function,

deactivate the hob and

activate it again.

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!

Refer to Safety chapters.

6.1 FlexiBridge function

The flexible induction cooking area

consists of four sections. The sections

can be combined into two cooking zones

with different size, or into one large

cooking area. The sides of the zones

which operate together light up, and they

are linked with shorter illuminated lines.

You choose the combination of the

sections by choosing the mode

applicable to the size of the cookware

you want to use. There are three modes:

Standard (activated automatically when

you activate the hob), Big Bridge and

Max Bridge.

To set the heat setting use

two left side control bars.

Switching between the modes

To switch between the modes use

sensor field: .

When you switch between

the modes the heat setting is

set back to 0.

ENGLISH 13

Diameter and position of the

cookware

Choose the mode applicable to the size

and the shape of the cookware. The

cookware should cover the selected area

as much as possible. Place the

cookware centrally on the selected area!

Place the cookware with the bottom

diameter smaller than 160 mm centrally

on a single section.

100-160mm

Place the cookware with the bottom

diameter larger then 160 mm centrally

between two sections.

> 160 mm

6.2 FlexiBridge Standard mode

This mode is active when you activate

the hob. It connects the sections into two

separate cooking zones. The sides of the

zones which operate together in this

mode light up, and they are linked with

shorter illuminated lines. You can set the

heat setting for each zone separately.

Use two left side control bars.

Correct cookware position:

Incorrect cookware position:

6.3 FlexiBridge Big Bridge

mode

To activate the mode touch until you

see the correct mode indicator . This

mode connects three rear sections into

one cooking zone. The front section is

not connected and operates as a

separate cooking zone. You can set the

heat setting for each zone separately.

Use two left side control bars.

www.electrolux.com14

Correct cookware position:

To use this mode you have to place the

cookware on the three connected

sections. If you use cookware smaller

than two sections the control bar blinks

and after 2 minutes the zone switches

off.

Incorrect cookware position:

6.4 FlexiBridge Max Bridge

mode

To activate the mode touch until you

see the correct mode indicator

. This

mode connects all sections into one

cooking zone. To set the heat setting use

any of the two control bars on the left

side.

Correct cookware position:

To use this mode you have to place the

cookware on the four connected

sections. If you use cookware smaller

than three sections the control bar blinks

and after 2 minutes the zone switches

off.

Incorrect cookware position:

6.5 PowerSlide

This function allows you to adjust the

temperature by moving the cookware to

a different position on the induction

cooking area.

The function divides the induction

cooking area into three areas with

different heat settings. The hob detects

the position of the cookware and adjust

the heat setting corresponding with the

position. You can place the cookware in

the front, middle or rear position. If you

place the cookware in the front you get

the highest heat setting. To decrease it,

move the cookware to middle or rear

position.

ENGLISH 15

Use only one pot when you

operate the function.

If you want to change the

heat setting, lift up the

cookware and place it on a

different zone. Sliding the

cookware can cause

scratches and discolouration

of the surface.

• 160 mm is the minimum bottom

diameter of the cookware for this

function.

• If you place the pot in the front

position, lights up on the control

panel. The control bar displays the

default heat setting .

• If you place the pot in the middle

position,

lights up on the control

panel. The control bar displays the

default heat setting .

• If you place the pot in the rear

position, lights up on the control

panel. The control bar displays the

default heat setting .

• To change the default heat setting

use left front control bar. You may

change the default heat setting only if

the function is active. You can change

the heat settings for each position

separately. The hob will remember

your settings next time you activate

the function.

Touch to activate the function.

The indicator comes on and the control

bar displays the default heat setting.

To deactivate the function, touch

.

7. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

7.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking

zones with suitable

cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer

bottom (with a correct marking from a

manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is suitable for an induction

hob if:

• water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware

must be as thick and flat as

possible.

Ensure pan bases are clean

and dry before placing on

the hob surface.

Cookware dimensions

Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically.

The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a diameter smaller than

the minimum receives only a part of the

power generated by the cooking zone.

Refer to "Technical data".

www.electrolux.com16

7.2 The noises during operation

If you can hear:

• crack noise: cookware is made of

different materials (a sandwich

construction).

• whistle sound: you use a cooking

zone with a high power level and the

cookware is made of different

materials (a sandwich construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not

indicate any malfunction.

7.3 Öko Timer (Eco Timer)

To save energy, the heater of the

cooking zone deactivates before the

count down timer sounds. The difference

in the operation time depends on the

heat setting level and the length of the

cooking operation.

7.4 Examples of cooking

applications

The correlation between the heat setting

of a zone and its consumption of power

is not linear. When you increase the heat

setting, it is not proportional to the

increase of the consumption of power. It

means that a cooking zone with the

medium heat setting uses less than a

half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

1 Keep cooked food warm. as nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes,

baked eggs.

10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heat up ready-

cooked meals.

25 - 50 Add at least twice as much

liquid as rice, mix milk

dishes halfway through the

procedure.

3 - 4 Steam vegetables, fish,

meat.

20 - 45 Add a couple of tablespoons

of liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for

750 g of potatoes.

4 - 5 Cook larger quantities of

food, stews and soups.

60 -

150

Up to 3 l of liquid plus ingre‐

dients.

6 - 7 Gentle fry: escalope, veal

cordon bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

as nec‐

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

ENGLISH 17

7.5 Hints and Tips for

Hob²Hood

When you operate the hob with the

function:

• Protect the hood panel from direct

sunlight.

• Do not spot halogen light on the hood

panel.

• Do not cover the hob control panel.

• Do not interrupt the signal between

the hob and the hood (e.g. with the

hand, a cookware handle or a tall

pot). See the picture.

The hood in the picture is only

exemplary.

Other remotely controlled

appliances may block the

signal. Do not use any such

appliances near to the hob

while Hob²Hood is on.

Cooker hoods with the Hob²Hood

function

To find the full range of cooker hoods

which work with this function refer to our

consumer website. The Electrolux cooker

hoods that work with this function must

have the symbol

.

8. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

8.1 General information

• Clean the hob after each use.

• Always use cookware with a clean

base.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

The printing on the flexible

induction cooking area may

become dirty or change its

colour from sliding the

cookware. You can clean the

area in a standard way.

8.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

Use a special hob scraper on the

glass surface at an acute angle and

move the blade on the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

www.electrolux.com18

moist cloth and a non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a cloth.

9. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

9.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op‐

erate the hob.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correct‐

ly connected to the electri‐

cal supply. Refer to the

connection diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse is blown

again and again, contact a

qualified electrician.

You do not set the heat

setting for 50 seconds.

Activate the hob again and

set the heat setting in less

than 50 seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

Pause operates. Refer to "Daily use".

There is water or fat stains

on the control panel.

Clean the control panel.

You cannot select the

maximum heat setting for

one of the cooking zones.

You cannot activate one of

the cooking zones.

The other zones consume

the maximum available

power.

Your hob works properly.

Reduce the heat setting of

the other cooking zones

connected to the same

phase.

Refer to "Power manage‐

ment".

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva‐

ted.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from

the sensor field.

ENGLISH 19

Problem Possible cause Remedy

Residual heat indicator

does not come on.

The zone is not hot be‐

cause it operated only for a

short time or the sensor is

damaged.

If the zone operated suffi‐

ciently long to be hot,

speak to an Authorised

Service Centre.

Hob²Hood does not work. You covered the control

panel.

Remove the object from

the control panel.

You use a very tall pot

which blocks the signal.

Use a smaller pot, change

the cooking zone or oper‐

ate the hood manually.

The sensor fields become

hot.

The cookware is too large

or you put it too near to the

controls.

Put large cookware on the

rear zones, if possible.

There is no sound when

you touch the panel sensor

fields.

The sounds are deactiva‐

ted.

Activate the sounds. Refer

to "Daily use".

The flexible induction

cooking area does not heat

up the cookware.

The cookware is in a

wrong position on the flexi‐

ble induction cooking area.

Place the cookware in the

correct position on the flex‐

ible induction cooking

area. The position of the

cookware depends on the

activated function or func‐

tion mode. Refer to "Flexi‐

ble induction cooking

area".

The diameter of the bottom

of the cookware is incor‐

rect for the activated func‐

tion or function mode.

Use cookware with a diam‐

eter applicable to the acti‐

vated function or function

mode. Use cookware with

a diameter smaller than

160 mm on a single sec‐

tion of the flexible induction

cooking area. Refer to

"Flexible induction cooking

area".

comes on.

Child Safety Device or

Lock operates.

Refer to "Daily use".

The control bar blinks. There is no cookware on

the zone or the zone is not

fully covered.

Put cookware on the zone

so that it fully covers the

cooking zone.

The cookware is unsuita‐

ble.

Use suitable cookware.

Refer to "Hints and tips".

The diameter of the bottom

of the cookware is too

small for the zone.

Use cookware with correct

dimensions. Refer to

"Technical data".

www.electrolux.com20

Stránka sa načítava ...

Electrolux EIP8546 Používateľská príručka

Electrolux EIP8546 Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty