6159920550_03
20 / 72 07/2015
English
Original instructions.
© COPYRIGHT 2014, DESOUTTER HP2
7SJ UK
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
Tool (class I) suitable for industrial environment
only. It shall be used for tightening or loosening
joints in wood, metal or plastic material.
No other use permitted.
For professional use only.
DATA
See page 4.
Normal environmental conditions
(for IEC 61010-1 standard)
- Temperature: 5°C to 40°C.
- Maximum relative humidity: 80% for
temperatures up to 31°C.
- Altitude up to 2,000 m.
- Usable in Pollution degree 2 environment:
indoor use only.
Declaration of noise and vibration emission
See page 68.
Vibration levels.
Sound levels.
a
hd
, a
h
: Vibration levels.
K / K
pA
= K
WA
= 3 dB : Uncertainty.
L
pA
: Sound pressure level.
L
WA
: Sound power level.
All values are current as of the date of this
publication. For the latest information please visit
www.desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher.
The actual exposure values and risk of harm
experienced by an individual user are unique
and depend upon the way the user works,
the workpiece and the workstation design, as
well upon the exposure time and the physical
condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_
sheet_0111.pdf
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modied to help
prevent future impairment.
ON RECEIVING THE TOOL
● Check the following items are included in the
box:
- Fixtured electric spindle
- Safety booklet
- User manual
INSTALLING THE TOOL
The tool can reach high temperatures
during use. It is necessary to protect
all persons of the risk of burns by a
material or immaterial barrier, or warn
him with an appropriate symbol.
On the other hand, the power cord
should be placed so as to avoid
prolonged contact with the hottest part
of the tool (motor).
The tool has a thermal protection,
which switch off operation when it
has reached a too high temperature.
It is the responsibility of the user to
congure the tool to operate within the
established maximum temperatures.
It is possible to rotate the connector by loosening
the two screws that freeze the position (see
“Figure A”).
● Plug the cable with help of TOP indication.
(see "Figure B").
● Any direct pull on the cable should be
avoided.