Electrolux PURE I9 Instruction book

Instruction Book

GB INSTRUCTION BOOK

FR MDE D’EMPLOI

BG   

CZ PŘÍRUČKA K POUŽITÍ

DE ANLEITUNG

DK VEJLEDNING

EE KASUTUSJUHEND

ES

MANUAL DE INSTRUCCIONES

FI OHJEKIRJA

HR KNJIŽICA S UPUTAMA

HU HASZNÁLATI ÚTMUTATÓ

IT ISTRUZIONI

LT INSTRUKCIJŲ KNYGELĖ

LV LIETOŠANAS PAMĀCĪBA

NO BRUKSANVISNING

PL INSTRUKCJA OBSŁUGI

RO MANUAL DE INSTRUCIUNI

SR 

RU

  

SE BRUKSANVISNING

SI NAVODILA ZA UPORABO

SK NÁVOD NA POUŽÍVANIE

TR TALİMAT KİTAPÇIĞI

UA 

ENGLISH

FRANÇAIS

БЪЛГАРСКИ

ČEŠTINA

DEUTSCH

DANSK

EESTI

ESPAÑOL

Click!

SUOMI

HRVATSKI

MAGYAR

ITALIANO

LIETUVIŠKAI

LATVIEŠU

NORSK

POLSKI

CONTENTS

ROMÂNĂ

SRPSKI

РУССКИЙ

SVENSKA

SLOVENŠČINA

SLOVENČINA

TΫRKCE

УКРАЇНСЬКА

3www.electrolux.com

OVERVIEW OF THE ROBOT

HOW TO USE THE ROBOT VACUUM CLEANER

HOW TO CONNECT TO THE ”PUREI9” APP

TIPS ON HOW TO GET THE BEST RESULTS

EMPTYING THE DUST CONTAINER

CLEANING THE FILTER

MAINTENANCE

CHANGING THE BATTERIES

ERROR HANDLING

TROUBLESHOOTING

SAFETY PRECAUTIONS

CONSUMER INFORMATION AND SUSTAINABILITY POLICY

Click!

TABLE OF CONTENTS:

4www.electrolux.com

Overview of the robot

Description of your robot vacuum cleaner

1 Display / Control panel

2 ECO function button

3 SPOT cleaning button

4 Play/Pause button / O button (long press)

5 Home button

6 Clock

7 Dust container indicator

8 WIFI connection indicator

9 Scheduled cleaning indicator

10 Warning indicator

11 Battery status indicator

12 Fan unit

13 Air outlet

14 Bumper

15 Side brush

16 3D Vision System (Camera)

17 Main wheels

18 Charging connectors

19 Brush roll lid

20 Brush roll

21 Battery compartments

22 Dust container release button

23 Dust container lid

24 Filter

25 Filter frame (and mesh net)

26 Dust container

27 Charging base

28 Charging connectors

29 Power adaptor and cord

* Accessories may vary from model to model.

1717

21

19

15

20

18

12

22

23

24

25

26

14

15

13

16

27

29

28

6

7

9

10

11

8

2

4

1

3

5

22

5www.electrolux.com

How to use the robot vacuum cleaner

Installation of the robot vacuum cleaner

1. Place the Charging base on the oor against the

wall. Plug the adaptor to the power jack on the

side of the base. Connect the Power cord plug to the

main socket. Wind up excessive cord on the back of

the base. Make sure there is an empty area of 0.5 m

on the sides and 1.5 m in front of the Charging base.

WiFi model: Place the base in range of the WiFi

router.

2. Place the side brush.

Note: If the robot is used to clean rooms with wall-to-

wall carpet, remove the side brush for best cleaning

results.t

Battery/Charging status

3. Place the robot on the Charging base.

The Battery icon will pulse, to indicate that the

robot is recharging.

1. Red battery (A) indicates that the robot needs to

get charged.

Red light pulse (B): The robot is charging – Low

charging level.

White light pulse (C):The robot has charged

enough to be used. (Press Play/Pause button to

clean.)

White light (D): The robot is ready for use.

Full charging time is ~ 3 hours.

0.5

m

1.5

m

0.5

m

A B C D

6www.electrolux.com

How to use the robot vacuum cleaner

Battery/Charging status

2. To preserve the battery life and performance:

- Always keep the robot charging when not in use.

- Charge it as soon as possible in the charging base

after the cleaning cycle. Waiting too long might

aect the batteries.

3. Storage (not plugged): In case the robot is stored

without being charged for a longer period of time,

remove the batteries and store them separately.

(Charge batteries before removing them).

To remove the batteries see “Changing the batteries”

on page 15.

How to connect to the ”PUREi9” APP

1. Download the ”PUREi9” App in the App Store

or Google play and then follow the instruction to

create the account and connect to the robot.

Note: Make sure that the phone is connected to the

home WiFi

(2.4 GHz).

2. During the process the App will ask you to

turn the robot upside down to activate the WiFi

module and scan the serial number bar code (A) or

enter it manually (B). Then continue following the

instruction from the App.

Note: before turning the robot, make sure that it has

been switched on for at least one minute.

2.4 GHz

5 GHz

B

A

We recommend to download the App and update the software before the first use.

7www.electrolux.com

How to use the robot vacuum cleaner

How to connect to the ”PUREi9” APP

3. When the setup is completed, turn the robot

back to its normal position. The WiFi symbol (A)

will be lit up to indicate that the robot is connected

to your home network. Note: it could take a few

moments for the robot clock to automatically

synchronise with your mobile device.

Note: Pulsing WiFi symbol indicates that the robot is

trying to connect to the network.

Cleaning schedule

Cleaning can be scheduled in the APP (Days & time)

Cleaning modes

1. Press Play/Pause button (A) to start cleaning.

After a few seconds of start-up, cleaning will be

commenced. The robot will start cleaning alongside

walls, working its way inwards.

Note: Press “Play/Pause” (A) brieﬂy to pause

cleaning, or press and hold to terminate cleaning.

2. Large rooms will be divided into cells of at

most 2 x 2.3 m.

Note: The cleaning pattern is more efficient if the

robot is started next to a wall.

A

PUREi9

A

~ 2.3 m

8www.electrolux.com

Should recharging be needed during cleaning,

the home button will light up and the robot will

return to the charging base. Home button (A) is lit. The

battery and Play/Pause button (B) ash to indicate

that the robot is charging and that it will resume

where it stopped.

The robot will recharge up to 90 % to resume cleaning

quicker. Charging time is ~ 2 hours.

How to use the robot vacuum cleaner

Auto Docking/Charging

When cleaning is completed, the robot

automatically returns to the charging base.

Note: If the robot is not started from the charging base,

it will return to the start position when ﬁnished.

Auto charging during cleaning cycle

Crossing threshold

ECO Mode

Before crossing a threshold or climbing

over any obstacle, the robot will stop and

check:

- the heights (A & B) on both sides of the

threshold/obstacle

- that the area on the other side is clear to

operate (C)

ECO mode: For a lighter cleaning, press the

ECO button to reduce the power, prolong

the running time and reduce noise level. The

robot will stay in ECO mode until the button is

pressed again.

2h

B

A

B

C

9www.electrolux.com

How to use the robot vacuum cleaner

Docking

Stop cleaning and send the robot to the

charging base: Press the Home button. If the robot

is not started from the charging base, it will return to

the starting position.

SPOT Cleaning

SPOT cleaning (small area, ~ 1 m): Place the robot

facing the spot and press the SPOT button. The robot

will will clean the area twice.

Tips on how to get the best results

Preparing the cleaning area

Before cleaning, remove smaller and fragile objects such as clothing, curtain strings, papers and power

cords from the oor. If the device passes over a power cord and drags it, there is a risk that an object could

be pulled o a table or shelf.

Larger/taller objects such as chairs can be left as the robot will clean around them.

Strong light, Mirrored walls, oor-to-ceiling windows and very shining objects could disturb the 3D Vision

system.

Limiting the cleaning area

The robot will clean all oors it can access. To limit the cleaning area, simply close doors or put an obstacle

in the way.

Dust emptying between scheduled cleanings

To get the most out of scheduled cleaning, empty the dust container regularly.

10www.electrolux.com

40 cm

22 mm

A

E

95 mm

D

C

B

D

C

A

B

(A) Leave a space of 40 cm around furniture without legs.

(B) The robot easily crosses thresholds with a height up to 22 mm.

(C) It cleans under furniture with more than 95 mm space under.

(D) Place the charging base on the left side of a door.

(E) The robot detects stairs and steep clis.

Carpets: The robot cleans

- short-pile carpets: (A) in the same pattern as the room

- medium-pile carpets : (B) rst around it (C) and comes back later to clean the carpet separately

- high-pile carpets: (D) are not cleaned. When the robot reaches the edge it continues with the rest of

the cleaning.

Tips on how to get the best results

Preparing the cleaning area

11www.electrolux.com

Tips on how to get the best results

Always carry the robot with two hands keeping

the front up. Manual moving of the robot:

Moving the robot during the cleaning process is not

advised, as it might restart the cleaning from the

beginning.

A

B

Cleaning of a house with more than one oor

can be facilitated by using an extra charging

base on each oor. (ANC: 406000071)

Turn the robot o: There is also the possibility to

turn the robot completely o, in case you are not

using it for a certain amount of time. To do this, please

follow the steps:

- Press the play button (A) on the robot for approx. 7

seconds.

- “OFF” is shown on the display (B).

- When the display turns dark, the robot is fully o (C ).

Turn the robot off

To restart the robot insert it into the charging

base again. It is also possible to turn it o in the

charging base, then you need to lift it and put it in the

charging base again to use it.

7 sec

A B C

12www.electrolux.com

Emptying the Dust container, Replacing/Cleaning the Filter

A

B

1. Empty the dust container regularly or when the

dust container icon lights up.

If the dust bin symbol remains lit up when the dust

bin is empty, please clean the lter.

2. Press Release button (A), remove the Dust

container by swinging it upwards (B).

Open the lid by swinging it upwards.

Empty the dust container into a waste bin.

Note: The dust container icon ﬂashes to indicate that

the Dust container has been removed, or is not in the

right position.

Emptying the Dust container

3. After emptying the container, close the lid

and put it back in place

Ret the Dust container in the robot.

Note: If the Dust container has not been properly

assembled and Play/Pause button is pressed, the

dust container icon ﬂashes. Reﬁt the Dust container

properly.

13www.electrolux.com

Cleaning the Filter

1. For best performance, we recommend to clean

the lter every 5th cleaning and to replace it every

6 months. (Ref: ERK2)

2. Remove the lter:

Remove the Dust container by swinging it

upwards (B). Open the lid by swinging it

upwards.

Swing the Filter frame downwards (C).

Remove the lter (D).

3. Rinse the lter with cold water. Tap the

lter frame to remove water. Let dry for 24

hours before placing it back in the machine.

A

B

C

D

Emptying the Dust container, Replacing/Cleaning the Filter

14www.electrolux.com

The 3D Vision System works best if the windows

(A,B,C) are kept clean and free from scratches.

Clean from light dust by using a dry soft cloth. If its

heavily soiled you can use a mild detergent to clean it.

Maintenance

Cleaning the 3D Vision System (Camera)

Cleaning the Wheels

1. Remove entangled hairs or such from the

main wheels so that they can turn freely.

Cleaning the Side brush

2. Should the small wheels get stuck, remove

them carefully by using a small screwdriver and

clean the wheels.

Pull the Side brush to remove it. Clean the Side

brush. Reattach the Side brush in the socket.

Side brush can be changed. (Ref: ERK2 / EBSB2)

A

B

C

15www.electrolux.com

1. Press the two latches and slide the lid forward

to remove the brush roll lid.

Maintenance

Cleaning the Brush roll

2. Pull out the Brush roll and clean the brush and

bearings. Remove entangled threads by snipping

them away with scissors. Ret in reverse order.

Brush roll can be replaced. (Ref: ERK2)

Cleaning the Air channel

Changing the batteries

Remove the dust container. Remove clogged

debris in the air channel. Put the dust container into

place.

1. The battery compartments are located on

the bottom side of the robot. Use a screwdriver

(PH2) to unscrew the battery compartment lids.

Replace the battery packs and ret the battery

compartment lids.

Caution! Make sure to change the two battery

packs at the same time.

Cleaning the Air channel, Changing the batteries

16www.electrolux.com

2. Use only original supplier batteries.

Batteries must be removed and disposed of safely,

before desposing of the machine.

(ANC: 406000060)

Cleaning the Air channel, Changing the batteries

Cleaning the charging connectors

Use a dry soft cloth to clean regularly the

charging connectors on the charging base and

under the machine.

Error handling

1. If an error occurs, the robot stops cleaning.

The warning icon will pulse and the digits “E:”

followed by an error code, is shown on the

display. The speaker will also describe the error.

After an error has occured, press any button to play

the audio message again.

2. When an error is resolved, press Play/Pause

button to start cleaning.

Note: For a complete list of the error codes and

solutions, see instructions in “Troubleshooting”.

17www.electrolux.com

Troubleshooting

Problem

Error

Code

Cause Solution

The display is blank. - The battery is empty. Charge the battery.

The robot does not

start.

The Dust container is

not present or properly

closed.

Place the Dust container in the robot, properly

close the lid.

(x3)

The robot is lifted. Place the robot on the oor before starting.

The robot does

not move/clean

properly.

E:10 The bumper is stuck

Please make sure the bumper can move properly

and remove any debris that might block it.

E:11 Right wheel is stuck Check that all parts turn freely.

Clean and remove entangled

threads from parts if needed.

Replace Brush roll or Side brush if damaged.

Check ”Maintenance” page 14.

E:12 Left wheel is stuck

E:13 Brush roll is stuck

E:14 Side brush is stuck

E:15 The robot is stuck or

unable to navigate.

Lift and place the robot where it can move

freely. Check ”Tips on how to get the best results”

page 9.

E:16 The 3D Vision System is

blocked or dusty.

Clean the 3D Vision System and make

sure nothing is blocking the sight. Check

”Maintenance” page 14.

The Dust container is full

or blocked.

Empty and/or clean the Dust Container. Check

”Emptying the Dust container” page 12.

E:17

The robot is operating

on a surface which is too

slippery.

Move the robot and charger to a new location

and start again.

No charge

indication

- The power cord and

adapter is not properly

assembled, and/or

connected to the mains.

Connect the adapter connector to the Charging

base. Connect the power cable to the mains.

Make sure the Charging plates on the robot and

the Charging base are connected.

Check that the plug and cable are not damaged.

The Charging plates

on the robot and the

Charging base are not

connected.

The batteries runs

empty fast

- The batteries life has

expired.

Change the 2 battery packs.

Check “Changing the batteries” page 15.

18www.electrolux.com

Problem

Error

Code

Cause Solution

Battery related

problems

E:20 Incorrect Charging base is

used.

Only use the original Electrolux Charging base,

supplied with the robot. If the Charging base

needs to be replaced; use Electrolux Charging

base

(ANC: 406000071).

E:21 Batteries are

malfunctioning during

use.

Change the 2 battery packs.

Check “Changing the batteries” page 15.

E:22 Product temperature is

too high.

Let the robot paused outside the charging

station for 6 hours.

E:23 Batteries are not properly

connected to the robot.

Connect batteries to robot.

Check “Changing the batteries” page 15.

The time is not

displayed.

The current time is not

set.

When the robot is connected to WiFi the time

will automatically set.

Wrong time is

displayed on the

robot.

The robot has not

received updated time

from the WiFi network.

Make sure the robot is connected to the WiFi

network and wait until it receives the correct

time. If it does not update within 24 hours redo

the onboarding procedure.

The room is not

properly cleaned,

but the robot

returns to the

Charging base.

- The robot is returning

to the Charging base to

charge the batteries.

The robot will automatically continue the

cleaning program as soon as the batteries are

recharged.

Water has been

sucked into the

robot.

- - It will be necessary to replace the motor at an

authorized Electrolux service centre. Damage to

the motor caused by the penetration of water is

not covered by the warranty.

Software issue E:30 Software is not working

correctly.

Please update the robot’s software.

E:31 Software upgrade has

failed.

Please redo software update.

Service needed E:40 - Contact an authorized Electrolux service center.

System error E:41 Internal error. Please restart desired operation.

E:42

For any further problems, please check the service area in the APP or on our website.

19www.electrolux.com

1x

3x

Consumables & Accessories

www.electrolux.com/shop

PUREi9 Performance kit

Ref: ERK2

PNC: 9001677674

Battery pack

ANC: 406000060

Charging base

ANC: 406000071

PUREi9 Power brush

REF: EBSB2

PNC: 9001683938

4x

20www.electrolux.com

Safety precautions

This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved.

The robot should only be used for normal vacuuming in a domestic/indoor environment.

Make sure the robot is stored in a dry place.

All service or repairs must be carried out by an authorized Electrolux service centre.

Remove the robot from the charger before cleaning or maintaining your robot.

Do not allow children to play with the appliance.

Packaging material, e.g. plastic or fabric bags should not be accessible to children to avoid

suocation.

The robot is designed for a specic voltage. Check that your supply voltage is the same as that

stated on the rating plate on the charging adaptor.

Use only the original charging station and adaptor designed for the robot.

Never use the robot:

• In wet areas.

• Close to ammable gases, etc.

• When the product shows visible signs of damage.

• On sharp objects or uids.

• On hot or cold ashes, lighted cigarette butts, etc.

• On ne dust, for instance from plaster, concrete, our, hot or cold ashes.

• Do not leave the robot in direct sunlight.

• Avoid exposing the robot to strong heat.

• The battery pack within must not be dismantled, short circuited or placed against a metal surface. Use

only the battery pack designed for the robot.

• Batteries must be removed from the appliance before it is disposed of.

• The appliance must not be plugged in when removing the battery.

• The battery is to be disposed of safely.

• Never use the robot without lter.

• Do not touch the brush roll while the cleaner is switched on and the brush roll is turning. Do not touch

the wheels while the robot is operating.

Using the robot in a manner that conicts with above recommendations may cause serious

personal injury or damage to the product. Such injury or damage is not covered by the warranty or

by Electrolux.

The warranty does not cover reduction in battery runtime due to battery age or use, as the life of

the battery depends upon the length and number of times the robot is used.

Before cleaning, remove small and fragile objects such as clothing, curtain strings, papers and

power cords from the oor. If the device passes over a power cord and pulls it, there is a risk that an

object could be pulled o a table or shelf.

The robot is designed to not move any larger objects in its way. Objects such as chairs can therefore

be left on the oor as the robot will clean around them.

Strong light, mirrored walls, oor-to-ceiling windows and very shining objects could disturb the 3D

Vision system.

Visit our website to:

Get usage advice, brochures,

trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.electrolux.com/productregistration

Buy Accessories and Consumables for your appliance:

www.electrolux.com/shop

Stránka sa načítava...

Electrolux PURE I9 Instruction book

Súvisiace články

Ostatné dokumenty