Electrolux EKM66405X Používateľská príručka

OPERATING AND INSTALLATION

INSTRUCTIONS OF

FREESTANDING MIXED COOKER

EKM66405X

EN

Dear Customer,

Our goal is to offer you products with high quality that exceed your expectations.

Your appliance is produced in modern facilities carefully and particularly tested for

quality.

This manual is prepared in order to help you use your appliance that is manufactured

by the most recent technology, with confidence and maximum efficiency.

Before using your appliance, carefully read this guide that includes the basic

information for right and safe installation, maintenance and use. Please contact to

the nearest Authorized Service for the installation of your product.

2

CONTENTS:

1. BRIEF PRESENTATION OF PRODUCT

2. WARNINGS

3. INSTALLATION AND PREPARATIONS FOR USE

3.1 Environment where the appliance to be installed

3.2 Installation of product

3.3 Adjustment of feet

3.4 Gas connection

3.5 Electric connection and safety

3.6 Gas conversion

4. USE OF YOUR PRODUCT

4.1 Use of product

4.1.1 Control of hob burners

4.1.2 Use of hotplate

4.1.3 Use of oven

4.1.4 Use of mechanical minute minder

4.2 Accessories used in oven

5. CLEANING AND MAINTENANCE

5.1 Cleaning

5.2 Maintenance

6. SERVICE AND TRANSPORT

6.1

6.2 Information related to the transport

Basic troubleshooting before contacting service

3

9

10

11

12

13

1. BRIEF PRESENTATION OF PRODUCT

List of Components:

1- Lid

2- Cooktop

3- Control Panel

4- Oven Door Handle

5- Oven Door

6- Adjustable Feet

7- Grill

8- Oven Lamp

9- Electrical Hotplate

10- Rapid Burner

11- Auxillary Burner

12- Pan Support

13- Semi-Rapid Burner

7

8

MODEL DEPTH WIDTH HEIGHT

(cm) (cm) (cm)

EKM66405X 60 60 85

1

2

3

4 5

6

4

2. WARNINGS

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING YOUR APPLIANCE, AND KEEP IT IN A

CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY.

THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR APPLIANCE MAY NOT HAVE

SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY ATTENTION TO THE EXPRESSIONS THAT

HAVE FIGURES, WHILE YOU ARE READING THE OPERATING MANUAL.

General Safety Warnings

- This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children

without supervision.

- WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to

avoid touching heating elements. Children less than

8 years of age shall be kept away unless

continuously supervised.

- WARNING: Unattended cooking on a hob with fat

or oil can be dangerous and may result in fire.

NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a

lid or a fire blanket.

- WARNING: Danger of fire: do not store items on

the cooking surfaces.

5

2. WARNINGS

- WARNING: If the surface is cracked, switch off the

appliance to avoid the possibility of electric shock.

- For hobs incorporating a lid, any spillage should be

removed from the lid before opening. And also the

hob surface should be allowed to cool before closing

the lid.

- The appliance is not intended to be operated by

means of an external timer or separate remote-

control system.

- WARNING: In order to prevent tipping of the

appliance, the stabilizing brackets must be installed.

(For detail information please read the anti-tilting kit

set guide.)

- During use, the appliance becomes hot. Care

should be taken to avoid touching heating elements

inside the oven.

- During use, handles held for short periods in

normal use can get hot.

- Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the oven door glass and other

surface since they can scratch the surface, which

may result in shattering of the glass or damage to

the surface.

- Do not use steam cleaners for cleaning the

appliance.

6

1. SAFETY WARNINGS

- WARNING: Ensure that the appliance is switched

off before replacing the lamp to avoid the possibility

of electric shock.

- CAUTION: Accessible parts may be hot when the

cooking or grilling is in use. Young children should be

kept away.

- Your appliance is produced in accordance with all applicable local and international standards and

regulations.

- Maintenance and repair work must be made only by authorized service technicians. Installation

and repair work that is carried out by unauthorized technicians may endanger you. It is dangerous

to alter or modify the specifications of the appliance in any way.

- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas

pressure or electricity voltage and frequency) and the requirements of the appliance are

compatible. The requirements for this appliance are stated on the label.

- CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic

household use only and should not be used for any other purpose or in any other application,

such as for non-domestic use or in a commercial environment or room heating.

- Do not try to lift or move the appliance by pulling the door handle.

- This appliance is not connected to a combustion products evacuation device. It shall be installed

and connected in accordance with current installation regulations. Particular attention shall be

given to the relevant requirements regarding ventilation.

- If after 15 s the burner has not lit, stop operating the device and open the compartment door

and/or wait at least 1 min before attempting a further ignition of the burner.

- These instructions are only valid if the country symbol appears on the appliance. If the symbol

does not appear on the appliance, it is necessary to refer to the technical instructions which will

provide the necessary instructions concerning modification of the appliance to the conditions of

use of the country.

- All possible security measures have been taken to ensure your safety. Since the glass may break,

you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass

with accessories.

- Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged,

it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to

prevent a hazard.

- While the oven door is open, do not let children climb on the door or sit on it.

Installation Warnings

- Do not operate the appliance before it is fully installed.

- The appliance must be installed by an authorized technician and put into use. The producer is

notresponsible for any damage that might be caused by defective placement and installation by

unauthorized people.

7

1. SAFETY WARNINGS

- When you unpack the appliance, make sure that it is not damaged during transportation. In case

of any defect; do not use the appliance and contact a qualified service agent immediately. As the

materials used for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to

children, they should be collected and removed immediately.

- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain,

snow etc.

- The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of

min 100°C.

During usage

- When you first run your oven a certain smell will emanate from the insulation materials and the

heater elements. For this reason, before using your oven, run it empty at maximum temperature

for 45 minutes. At the same time you need to properly ventilate the environment in which the

product is installed.

- During usage, the outer and inner surfaces of the oven get hot. While opening the oven door,

step back to avoid the hot steam coming out of the oven. There may be a risk of burns.

- Do not put flammable or combustible materials, in or near the appliance when it is operating.

- Always use oven gloves to remove and replace food in the oven.

- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of

extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or frypan

with its cover in order to choke the flame that has occured in this case and turn the cooker off.

- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so

they cannot be knocked or grabbed.

- If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also

when you do not use the appliance, keep the gas valve off.

- Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.

- The trays incline when pulled out. Be careful not to let hot liquid spill over.

- CAUTION: The use of a gas cooking appliance results in the production of heat, moisture and

products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated

especially when the appliance is in use, keep natural ventilation holes open or install a mechanical

ventilation device (mechanical extractor hood).

- Prolonged intensive use of the appliance may call for additional ventilation, for example opening

of a window, or more effective ventilation, for example increasing the level of mechanical

ventilation where present.

- While using the grill burner, keep the oven door open and always use the grill deflector shield

supplied with the product. Never use the grill burner with the oven door closed.

- CAUTION: Glass lids may shatter when heated.

Turn off all the burners before shutting the lid.

The hob surface should be allowed to cool before closing the lid.

- When the door or drawer of the oven is open, do not leave anything on it. You may unbalance

your appliance or break the cover.

- Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper, cloth...etc)

into the drawer. This includes cookware with plastic accessories (e.g. handles).

- Do not hang towels, dishcloths or clothes from the appliance or its handles.

8

1. SAFETY WARNINGS

During cleaning and maintenance

- Always turn the appliance off before operations such as cleaning or maintenance. You can do it

after plugging the appliance off or turning the main switches off.- Do not remove the control

knobs to clean the control panel.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU ALWAYS

USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED

SERVICE AGENTS IN CASE OF NEED.

9

3. INSTALLATION AND PREPARATIONS FOR USE

This modern, functional and practical cooker, that was manufactured with the parts and materials of

highest quality, will meet your cooking needs in every aspect. You must surely read this manual so

that you don't have any problem in future and to be able to have satisfactory results. The following

information are the required rules for right installation and service processes. It must be read

especially by the technician who will install the appliance

Contact to Authorized Service for installation of your product

Your product must be set up and used in a place where it will always have ventilation

While operating, this appliance needs

There must be a natural ventilation enough to provide the gas to be used in the environment.

The average air flow must directly come in through the air holes that will be opened on the walls

that are opened towards outside.

.

3.1 Environment where your appliance will be installed

• .

3

• 2m /h air per kw input.

•

.

2

These air holes must have at least the effective cross section of 100cm for fresh air circulation

(One or more air holes can be opened.). This hole (or holes) must be opened so that they are not

blocked. Preferably they must be placed close to the bottom and at opposite side of the smokes

of the burned gases that were emptied. If it seems not possible to open these ventilations in the

place where the appliance is set up, the needed air can also be obtained through the next room,

provided that this place is not a bedroom or a dangerous place. In this case this “next room”

must also be ventilated as required.

Emptying of the Burned Gases from Environment

The cooking appliances that operate with gas, throw the burned gas wastes out directly to the

outside or through the cooker hoods that are connected to the a chimney that opens directly to the

outside. If it seems not possible to install a cooker hood, it is required to set an electric fan on the

window or wall that has access to fresh air. This electric fan must have the capacity to change the air

of the kitchen environment 4-5 times of its own volume of air per hour

!

Air inlet section

2

min. 100cm

Air inlet section

2

min. 100cm

Figure 1

Figure 2

10

3. INSTALLATION AND PREPARATIONS FOR USE

Cooker hood

flue

Electrical ventilator

Air inlet section

2

min. 100cm

Air inlet section

2

min. 100cm

Figure 3

Figure 4

3.2 Installation of product

.

•

.

•

.

• .

• 80°C.

•

There are some factors that must be paid attention to while installing your product. Surely be very

careful to while installing your product. Pay attention to our below instructions in order to be able

to prevent any problems and/or dangerous situations that may occur later

The appliance can be placed close to other furniture on condition that in the area where the

oven is set up, the furniture's height does not exceed the height of the cooker panel

Pay attention not to place it near the refrigerator, there must be no flammable or inflammable

materials such as curtain, waterproof cloth, etc. that will begin to burn quickly

It is required that there must be least a 2cm blank space around the product for air circulation

The furniture close to product must be manufactured resistant to temperatures up to

If the kitchen furniture are higher than the cooktop, it must be at least 10cm away from the

cooker's side.

The minimum heights from the pan support and wall cupboards to cooker hoods with fan over the

product, are shown in figure 5. Thus, the cooker hood must be at minimum 65cm height from the

pan support. If there is no cooker hood, this height must not be less than 70cm.

Figure 5

Min. 50cm

COOKER HOOD

Min. 42cm

Min. 65cm(with hood)

Min. 70cm(without hood)

3. INSTALLATION AND PREPARATIONS FOR USE

11

3.3 Adjustment of feet

.

3.4 Gas connection

Your stands on 4 adjustable feet. When the is

placed where to be used, check if the product is balanced. If it

is not balanced, you can make the adjustment by turning the

feet clockwise if required. It is possible to raise the appliance

maximum 30mm by the feet. If the feet are adjusted

appropriately, it is required not to move the appliance by

dragging, it should be moved by lifting it up

Assembly of gas supply and leakage check

The connection of the appliance should be performed in accordance with local and international

standards and regulations applicable. You can find the information related to appropriate gas types

and appropriate gas injectors on technical data table. If the pressure of used gas is different than

these values stated or not stable in your area, it may be required to assemble an available pressure

regulator on the gas inlet. It is certainly required to contact to the authorized service to make these

adjusments.

The points that must be checked during flexible hose assembly

If the gas connection is made by a flexible hose that is fixed on the gas inlet of appliance, it must be

fixed by a pipe collar as well. Connect your appliance with a short and durable hose that is as close

as possible to the gas source. The hose's permitted maximum lenght is 1.5m. The hose that brings

gas to the appliance must be changed once a year for your safety.

0

The hose must be kept clear from areas that may heat up to temperatures in excess of 50 C. The

hose must not be ruptured, bent or folded. It must be kept clear of sharp corners, moving things,

and should not be defective. Before assembly, it must be checked whether there is any production

defect.

As gas is turned on, all connection parts and hose must be checked with soapy water or leakage

fluids. Do not use naked flame to check gas leakage. All metal components used during gas

connection must be clear of rust. Also check the expiry dates of components to be used.

The points that must be checked during fixed gas connection assembly

To assemble a fixed gas connection (gas connection made by threads, e.g. a nut), there are different

methods used in different countries. The most common parts are already supplied with your appliance.

Any other part can be supplied as spare part.

During connections always keep the nut on the gas manifold fixed, while rotating the counter-part. Use

spanners of appropriate size for safe connection. For all surfaces between different components,

product product

Figure 6

3. INSTALLATION AND PREPARATIONS FOR USE

12

always use the seals provided in the gas conversion kit. The seals used during connection should

also be approved to be used in gas connections. Do not use plumbing seals for gas connections.

Remember that this appliance is ready to be connected to gas supply in the country for which it has

been produced. The main country of destination is marked on the rear cover of the appliance. If you

need to use it in another country, any of the connections in the figure below can be required. In

such a case, learn the appropriate connection parts and obtain those parts to perform a safe

connection.

It is required to call the authorized service to be able to make the gas connections appropriately

and in compliance with safety standards.

Surely do not use any match or lighter for control of gas leakage

During the electric connection, follow the instructions stated in the user manual

The earthing cable must be connected to the earth terminal

You have to ensure the power cord with suitable insulation to be connected to the power source

during the connection If there is no appropriate earthed electric outlet in accordance with

regulations in the place where the appliance to be installed, contact to our authorized service.

The earthed electric outlet must be close to the appliance.

Do not use an extension cord

The power cord must not touch to the hot surface of the product.

In case the cord is damaged, contact Authorized Service to have it changed

Any wrong electric connection may damage your appliance, as well as endangering your safety,

rendering your guarantee invalid

ATTENTION! .

3.5 Electric connection and safety

.

• .

•

.

• .

•

• .

•

.

!

Seal

Hose

Fitting

Adaptor

Gas Hose

with Collar

Mechanical

Gas Hose

Mechanical

Gas Hose

Mechanical

Gas Hose

Gas Pipe

Gas

Pipe

Gas

Pipe

Gas

Pipe

Figure 7

13

•

.

The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different contact

your authorized service

L

N

BROWN

YELLOW+GREEN

BLUE

Figure 8

•

.

3.6 Gas conversion

:

Changing injectors:

:

• .

•

The supply cord should be kept away from hot parts of appliance. Otherwise, the cord may be

damaged, causing short circuit.

The manufacturer declares that it has no responsibility against any kind of damages and losses

that are caused by improper connections that are performed by unauthorized people

Caution : The following procedures must be undertaken by authorized service people.

Your appliance is adjusted to be operated with LPG/NG gas. The gas burners can be adapted to

different types of gas, by replacing the corresponding injectors and adjusting minimum flame length

suitable to the gas in use. For this purpose, following steps should be performed

Hob Burners

Cut off the main gas supply and unplug from the electric mains

Remove the burner cap and the adapter(Figure 9).

Unscrew the injectors. For this, use a 7mm spanner(Figure 10).

Replace the injector with the ones from the gas conversion kit, with corresponding diameters

suitable to the type of gas that is going to be used, according to the information chart (which is

also supplied in the gas conversion kit).

3. INSTALLATION AND PREPARATIONS FOR USE

14

Adjusting the reduced flame position

The flame length in the minimum position is adjusted with a flat screw located on the valve. For

valves without flame failure device, the screw is located inside the valve spindle(Figure 11). For

easier reduced flame adjustment, it is advised to remove the control panel (and microswitch, if

present) during adjustment.

:

3. INSTALLATION AND PREPARATIONS FOR USE

Figure 10

Injector

Spanner

Figure 9

To determine the minimum position, ignite the burners and leave them on in minimum position.

Remove the with the help of a small screwdriver fasten or loosen the bypass screw around 90

angular degrees. When the flame has a length of at least 4mm, the gas is well distributed. Make

sure that the flame does not die out when passing from the maximum position to the minimum

position. Create an artificial wind with your hand toward the flame to see if the flames are stable.

Changing the gas inlet:

For some countries, the gas inlet type can be different for NG/LPG gases. In such a case, remove the

current connection components and nuts (if any) and connect the new gas supply accordingly. In all

conditions, all components used in gas connections should be approved by local and/or

international authorities. In all gas connections, refer to the “Assembly of gas supply and leakage

check” clause explained before.

Figure 11

Screw(inside the hole)

Valve without flame failure device

4. USE OF YOUR PRODUCT

15

4.1 Use of product

•

:

•

Ignition of the burners

To determine which knob controls which burner, check the position symbol above the knob.

Manual Ignition of the Gas Burners

If your appliance is not equipped with any ignition aid or in case there is a failure in the electric

network, follow the procedures listed below

For Hob Burners: To ignite one of the burners, press and turn its knob counter-clockwise so that the

knob is in maximum position, approach a match, taper or another manual aid to its upper

circumference. Move the ignition source away as soon as you see a stable flame.

Electrical Ignition

Electrical Ignition by Hob Control Knob

Press the valve of the burner you want to operate and turn the valve in the counterclockwise

direction (clockwise for the grill burner) so that the knob is in maximum position while keeping the

knob pressed. The spark plugs will generate sparks as long as you keep the control knob pressed.

The micro switch placed under the knob will automatically create sparks through the spark plug of

the burner. Continue pressing the knob until you see a stable flame on the burner.

4. USE OF YOUR PRODUCT

16

4.1.1 Control of the hob burners

The knob has 3 positions: Off (0), maximum (big flame symbol) and minimum (small flame symbol).

After you ignite the burner in maximum position; you can adjust the flame length between

maximum and min. positions. Do not operate the burners when the knob position is between

maximum and off positions.

After the ignition, check the flames visually. If you see yellow

tip, lifted or unstable flames; turn the gas flow off, and check

the assembly of burner caps and crowns (Figure 13). Also,

make sure that no liquid has flown into the burner cups. If

the burner flame goes out accidentally, turn the burner off,

ventilate the kitchen with fresh air, and do not attempt re-

ignition for 90 sec.

When turning the hob off, turn the knob in the clockwise

direction so that the knob shows "0" position or the marker

on the knob points upwards.

Figure 13

Cap

Crown

Spark

Plug

Burner

Cup

Your hob has burners of different diameters. The most economic way of using gas is to choose the

correct size gas burners for your cooking pan size and to bring the flame to minimum position once

the boiling point is reached. It is recommended to always cover your cooking pan.

In order to obtain maximum performance from the main burners, use pots with the following flat

bottom diameters. Using smaller pots than the minimum dimensions stated below will cause

energy loss.

Rapid Burner: 22-26cm

Semi-rapid Burner: 14-22cm

Auxiliary Burner: 12-18cm

Make sure that the tips of the flames do not spread out of the outer circumference of the pan, as

this may also harm the plastic accessories around the pan (handles etc.).

MAX. position

OFF position

Figure 12

MODULATE

MIN. position

4. USE OF YOUR PRODUCT

17

When the burners are not in use for prolonged periods, always turn the main gas control valve off

.

WARNING:

• Use only flat pans and with a sufficiently thick base.

• Ensure that the base of the pan is dry before placing it on the burners.

• The temperature of accessible parts may be high when the appliance is operating. So it is

imperative to keep children and animals out of the reach of the burners during and after

cooking.

• After use, the hob remains very hot for a prolonged period of time, do not touch it and do not

place any object on top of the hob.

• Never place knives, forks, spoons and lids on the hob as they will get hot and could cause

serious burns.

Figure 14

!

4. USE OF YOUR PRODUCT

18

4.1.2. Use of Hotplate

These hotplates are controlled by a 6 position switch.

By switching the control knob to one of these positions the

hotplate can be operated. Near each hob control knob, there is

a small diagram that shows which hotplate is controlled with

that knob. On/off light on the control panel shows if any of the

hotplates are in use.

Figure 15

Hotplate Knob Position - Function

0 Off position

1 To melt butter etc. and to warm small quantities of liquid.

2 To warm bigger quantities of liquid. To prepare creams and sauces.

3 To defrost food for cooking

4 To cook delicate meat and fish

5 To roast meat and steak

6 To boil big quantities of liquid or to fry.

Warning:

When the operating for the first time or whenever the hotplate has not been used for a prolonged

time it is necessary to eliminate any humidity which may have accumulated around the electrical

elements of the plate by operating the hotplate on its lowest setting for about 20 minutes.

Use only flat pans and with a sufficiently thick base.

Never use a pan with a smaller diameter than of the hotplate.

Ensure that the base of the pan is dry before placing it on the hotplate. While the hotplate is in

operation, it is important to ensure that the pan is centered correctly above the hotplate.

•

!

4. USE OF YOUR PRODUCT

19

CORRECT

INCORRECT

circular saucepan base

INCORRECT

saucepan’s base had not settled

INCORRECT

small saucepan diameter

Figure 16

• Never operate the hob without pans on the hotplate.

• The temperature of accessible parts maybe high when the appliance is operating. So it is

imperative to keep children and animals out of the reach of the hotplate during and after the

operation.

• If you note a crack on the hotplate it must be immediately switched off and replaced.

Stránka sa načítava...

Electrolux EKM66405X Používateľská príručka

Electrolux EKM66405X Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty