Valid for serial no. 745--xxx--xxxx0444 408027 080110
Origot
Feed 3004,
Feed 4804
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 15..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 6.......................................................
2.1 Îáîðóäîâàíèå 6...........................................................
2.2 Ïóëüò óïðàâëåíèÿ 6........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 7................................
4ÓÑÒÀÍÎÂÊÀ 8.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 8..................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 8...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 10.....................................
5.2 Ïîäâîä âîäû 10.............................................................
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè 11..............................................
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè â áëîê Feed 3004 11.............................
5.5 Çàìåíà è âñòàâê à ïðîâîëîêè â áëîê Feed 4804 12............................
5.6 Çàìåíà ïîäàþùèõ ðîëèêîâ â áëîêå Feed 3004 12.............................
5.7 Çàìåíà ïîäàþùèõ ðîëèêîâ â áëîêå Feed 4804 12.............................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 13.................................
6.1 Ïðîâåðêà è ÷èñòêà 13.......................................................
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 14.......................................
ÑÕÅÌÀ 26..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 2 7.....................................................
ÁÛÑÒÐÎÈÝÍÀØÈÂÅÌÛÅ ÄÅÒÀ ËÈ 28...................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 32...........................
bm50d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàáî÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê ò ðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàáî÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò âîçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåò ñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
bm50d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâå òñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÂÍÈÌÀÍÈÅ!
Äóãoaaÿ caapka è peçka oïacíû kak äëa ècïoëíèteëÿ paáît, tak è äëa ïîctopoííèõëèö. Tpeáyéte
coáëþäåíèå àñåõ ïðààèë áåçîïàñíîñòè, äåéñòàóþùèõ íà îáúåêòå, êîòîðûå äîëæíû ó÷èòûààòú
ñåäåíèÿ îá îïàñíîñòÿõ, ïðåäñòà àëåííûå èçãîãà èòåëåì ñààðî÷íîãî îáîðóäîààíèà.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅ ËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâå òñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå êîíòàêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåò àëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãó ò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæåíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñòîðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
ÎÑÒÎÐÎÆÍÎ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè
âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå
èíñòðóêöèè.
ÎÑÒÎÐÎÆÍÎ!
Îáîðóäîâàíèå Class À íå ïðåäíàçíà÷åíî äëÿ èñïîëüçîâàíèÿ â
æèëûõ ïîìåùåíèÿõ, ãäå ýëåêòðîñíàáæåíèå îñóùåñòâëÿåòñÿ èç
áûòîâûõ ñåòåé íèçêîãî íàïðÿæåíèÿ. Â òàêèõ ìåñòàõ ìîãóò
ïîÿâèòüñÿ ïîòåíöèàëüíûå òðó äíîñòè îáåñïå÷åíèå
ýëåêòðîìàãíèòíîé ñîâìåñòèìîñòè îáîðóäîâàíèÿ Class À
âñëåäñòâèå êîíäóêòèâíûõ è ðàäèàöèîííûõ ïîìåõ.
ÎÑÒÎÐÎÆÍÎ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
bm50d1ra -- 6 --
Ìçí áðïññßðôåôå åßäç çëåêôñéêïý åîïðëéóìïý ìáæß ìå êïéíÜ áðïññßììáôá!
Ôçñþíôáò ôçí ÅõñùðáÚêÞ ïäçãßá 2002/96/EK ó÷åôéêÜ ìå ôá áðüâëçôá åéäþí
çëåêôñéêïý êáé çëåêôñïíéêïý åîïðëéóìïý êáé ôçí åöáñìïãÞ ôçò óýìöùíá ìå ôçí
åèíéêÞ íïìïèåóßá, ôá åßäç çëåêôñéêïý åîïðëéóìïý ðïõ Ý÷ïõí ïëïêëçñþóåé ôïí êýêëï
ôçò æùÞò ôïõò ðñÝðåé íá óõëëÝãïíôáé ÷ùñéóôÜ êáé íá åðéóôñÝöïíôáé óå
ðåñéâáëëïíôéêÜ óõìâáôÞ åãêáôÜóôáóç áíáêýêëùóçò. Ùò éäéïêôÞôçò ôïõ åîïðëéóìïý,
èá ðñÝðåé íá åíçìåñþíåóôå áðü ôïí ôïðéêü áíôéðñüóùðü ìáò ôó åãêåêñéìÝíá
óõóôÞìáôá óõëëïãÞò.
Ìå ôçí åöáñìïãÞ áõôÞò ôçò ÅõñùðáúêÞò ïäçãßáò âåëôþíåôáé ôï ðåñéâÜëëïí êáé ç
õãåßá ôïõ áíèñþðïõ!
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
2 ÂÂÅÄÅÍÈÅ
Áëîêè ïîäà÷è ïðîâîëîêè Feed 3004 / Feed 4804 ñ ïàíåëÿìè óïðàâëåíèÿ MA23
èëè MA24 ïðåäíàçíà÷åíû äëÿ äóãîâîé ñâàðêè ïëàâÿùèìñÿ ýëåêòðîäîì â
ñðåäå èíåðòíîãî ãàçà (MIG) / äóãîâîé ñâàðêè ïëàâÿùèìñÿ ýëåêòðîäîì
(MAG) ñ èñòî÷íèêàìè ñâàðî÷íîã î òîêà CAN íà 400 A, 500 A è 600 A.
Áëîêè ïîäà÷è ïðîâîëîêè ñîäåðæàò ÷åòûðåõðîëèêîâûå ìåõàíèçìû ïîäà÷è
ïðîâîëîêè, à òàêæå ýëåêòðîííóþ ñõåìó óïðàâëåíèÿ.
Èõ ìîæíî èñïîëüçîâàòü ñîâìåñòíî ñ ïðèñïîñîáëåíèåì ä ëÿ ïðîâîëîêè ESAB
MarathonPact èëè ñ êà òóøêîé äëÿ ïðîâîëîêè (ñòàíäàðòíûé äèàìåòð 300 ìì, ñ
ïðèíà äëåæíîñòüþ Ø 440 ìì).
Áëîê ïîäà÷è ïðîâîëîêè ìîæíî óñòàíîâèòü ëèáî íà òåëåæêå äëÿ áëîêà ïèòàíèÿ,
ïîäâåøåííîé íàä ðàáî÷èì ìåñòîì, íà ïðîòèâîâåñå, ëèáî íà ïîëó ñ
èñïîëüçîâàíèåì êîìïëåêòà êîëåñ èëè áåç êîëåñ.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 32.
2.1 Îáîðóäîâàíèå
Áëîê ïîäà÷è ïðîâîëîêè êîìïëåêòóåòñÿ ñëåäóþùèì:
S ðóêîâîäñòâî ïî ýêñïëóàòàöèè áëîêà ïîäà÷è ïðîâîëîêè
S ðóêîâîäñòâî ïî ðàáîòå ñ ïàíåëüþ óïðàâëåíèÿ íà àíãëèéñêîì ÿçûêå
S ÿðëûê ñ ïåðå÷íåì ðåêîìåíäîâàííûõ ñìåííûõ äåòàëåé
2.2 Ïóëüò óïðàâëåíèÿ
Áëîê ïîäà÷è ïðîâîëîêè ïîñòàâëÿåòñÿ â êîìïëåêòå ñ îäíèì èç ñëåäóþùèõ
ïóëüòîâ óïðàâëåíèÿ:
MA23
Ðó÷êè óïðàâëåíèÿ, ïðåäíàçíà÷åííûå äëÿ óñòàíîâêè
íàïðÿæåíèÿ è ñêîðîñòè ï îäà÷è ïðîâîëîêè / ñèëû
ñâàðî÷íîãî òîêà. Íàñòðîéêà äðóãèõ ïàðàìåòðîâ
îñóùåñòâëÿåòñÿ ïðè ïîìîùè êíîïîê.
MA24
Ðó÷êè óïðàâëåíèÿ, ïðåäíàçíà÷åííûå äëÿ óñòàíîâêè
íàïðÿæåíèÿ / QSett èñêîðîñòèïîäà÷èïðîâîëîêè/
ñèëû ñâàðî÷íîãî òîêà. Íàñòðîéêà äðóãèõ
ïàðàìåòðîâ îñóùåñòâëÿåòñÿ ïðè ïîìîùè êíîïîê.
bm50d1ra -- 7 --
Ïîäðîáíîå îïèñàíèå ïàíåëåé óïðàâëåíèÿ ïðèâåäåíî â îòäåëüíîì
ðóêîâîäñòâå.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Feed 3004 Feed 4804
Íàïðÿæåíèå ñåòè 42 Â 50-60 Ãö 42 Â 50-60 Ãö
Ïîòðåáëÿåìàÿ ìîùíîñòü 336 ÂÀ 378 ÂÀ
Òîê ýëåêòðîäâèãàòåëÿ I
max
8A 9A
Ñêîðîñòü ïîäà÷è ïðîâîëîêè 0,8-25,0 ì/ìèí 0,8-25,0 ì/ìèí
Ïîäñîåäèíåíèå ãîðåëêè EURO EURO
Ìàêñ. äèàìåòð êàòóøêè ñ
ïðîâîëîêîé
300 ìì (*440 ìì) 300 ìì (*440 ìì)
Äèàìåòð ïðîâîëîêè
Fe
Ss
Al
Ïðîâîëîêà ñ ñåðäå÷íèêîì
0,8-1,6 ìì
0,8-1,6 ìì
1,0 è 1,6 ìì
0,9-1,6 ìì
0,8-2,4 ìì
0,8-2,4 ìì
1,0 è 2,4 ìì
0,9-2,4 ìì
Ìàññà 15 êã 19 êã
Ðàçìåðû (ä x ø x â) 690 x 275 x 420 ìì 690 x 275 x 420 ìì
Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî +40˚C îò -10 äî +40˚C
Çàùèòíûé ãàç
ìàêñèìàëüíîå äàâëåíèå
Âñå òèïû,
ïðåäíàçíà÷åííûå ä ëÿ
ñâàðêè MIG/MAG.
0,5 ÌÏà ( 5 áàð)
Âñå òèïû,
ïðåäíàçíà÷åííûå ä ëÿ
ñâàðêè MIG/MAG.
0,5 ÌÏà ( 5 áàð)
Òèï îõëàæäåíèÿ
ìàêñèìàëüíîå äàâëåíèå
50 % âîäû / 50 %
ìîíîýò èëåíãëèêîëÿ
0,5 ÌÏà ( 5 áàð)
50 % âîäû / 50 %
ìîíîýò èëåíãëèêîëÿ
0,5 ÌÏà ( 5 áàð)
Ìàêñèìàëüíàÿ äîïóñòèìàÿ
íàãðóçêà ïðè
ðàáî÷åì öèê ëå 60%
500 A 500 A
Ê ëàññ çàùèòû IP23 IP23
* Ïðèíàäëåæíîñòè, ñì. ñòð. 32.
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷ åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
bm50d1ra -- 8 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Ïðè ïðîâåäåíèè ñâàðêè â óñëîâèÿõ ïîâûøåííîé îïàñíîñòè ïîðàæåíèÿ
ýëåêòðè÷åñêèì òîêîì ðàçðåøàåòñÿ èñïîëüçîâàòü òîëüêî èñòî÷íèêè ïèòàíèÿ
â ñîîòâ åòñòâóþùåì áåçîïàñíîì èñïîëíåíèè. Òàêèå èñòî÷íèêè ïèòàíèÿ
ïîìå÷åíû ñèìâîëîì .
4.1 Èíñòðóêöèè ïî ïîäúåìó
Íîìåð çàêàçà äëÿ ïîäúåìíîé ïðîóøèíû ïðèâåäåí íà ñòðàíèöå 32.
ÏÐÈÌÅ×ÀÍÈÅ! Ïðè èñïîëüçîâàíèè ä ð óãî ãî ìîíòàæíîãî óñòðîéñòâà åãî
ñëåäóåò èçîëèðîâàòü îò áëîêà ïîäà÷è ïðîâîëîêè.
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. NO TAG. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
Ïðè ïåðåìåùåíèè îáîðóäîâàíèÿ èñïîëüçóéòå ñïåöèà ëüíóþ ðóêîÿòêó.
Âíèìàíèå! Íå íàäàâëèâàéòå íà ñâàðî÷íûé ïèñòîëåò.
ÂÍÈÌÀÍÈÅ!
Óáåäèòåñü, ÷òî áîêîâûå ïàíåëè çàêðûòû âî âðåìÿ ðàáîòû.
bm50d1ra -- 9 --
ÂÍÈÌÀÍÈÅ!
Äëÿ ïðåäîòâðàùåíèÿ ñîñêàëüçûâàíèÿ êàòóøêè ñ
ïðîâîëîêîé ñî âò óëêè çàôèêñèðóéòå åå ïîâîðîòîì
êðàñíîé êíîïêè êàê ïîêàçàíî íà ðèñóíêå ðÿäîì ñî
âòóëêîé.
ÂÍÈÌÀÍÈÅ!
Ñîáëþäàéòå îñòîðîæíîñòü! Âðàùàþùèåñÿ äåòàëè ìîãóò
íàíåñòè òðàâìû!
ÂÍÈÌÀÍÈÅ!
Ïðè èñïîëüçîâàíèè àãðåãàòà ïîäà÷è ïðîâîëîêè ñ ïðîòèâîâåñîì âîçíèêàåò
îïàñíîñòü îïðîêèäûâàíèÿ. Çàêðåïèòå îáîðóäîâàíèå - îñîáåííî åñëè îíî
óñòàíîâëåíî íà íåðîâíîé èëè íàêëîííîé ïîâåðõíîñòè.
bm50d1ra -- 1 0 --
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ïàíåëü óïðàâëåíèÿ,
(ñì. ñîîòâåòñòâóþùåå ðóêîâîäñòâî ïî
ýêñïëóàòàöèè)
6 Ñîåäèíèòåëü äëÿ ñâàðî÷íîãî òîêà îò
èñòî÷íèêà ïèòàíèÿ (OKC)
2 Ñîåäèíèòåëü àäàïòåðà ïóëüòà
äèñòàíöèîííîãî óïðàâëåíèÿ
7 Ñîåäèíèòåëü êàáåëÿ óïðàâëåíèÿ îò
èñòî÷íèêà ïèòàíèÿ èëè áëîêà
îõëàæäåíèÿ
3 ÑÈÍÈÉ ñîåäèíèòåëü ä ëÿ ïîäà÷è âîäû
îõëàæäåíèÿ îò áëîêà îõëàæäåíèÿ ê
ñâàðî÷íîé ãîðåëêå ñ ïîìîùüþ íàñîñà
ñ ëîãè÷åñêèì óïðàâëåíèåì*
8 ÊÐÀÑÍÛÉ ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåéæèäêîñòèêáëîêó
îõëàæäåíèÿ
4 ÊÐÀÑÍÛÉ ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåéæèäêîñòèèçñâàðî÷íîãî
ïèñòîëåòà
9 Øòóöåð ä ëÿ çàùèòíîãî ãàçà
5 Ñîåäèíèòåëü äëÿ ñâàðî÷íîãî
ïèñòîëåòà
10 ÑÈÍÈÉ ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåéæèäêîñòèèçáëîêà
îõëàæäåíèÿ
ÏÐÈÌÅ×ÀÍÈÅ! Äèñïëåé (öèôðîâîé èçìåðèòåëüíûé ïðèáîð) è ñîåäèíèòåëüíûå ðàçú¸ìû
ñèñòåìû îõëàæäåíèÿ óñòàíàâëèâàþòñÿ òîëüêî íà îïðåäåëåííûõ ìîäåëÿõ.
* ELP = Íàñîñ ñ ëîãè÷åñêèì óïðàâëåíèåì ESAB, ñì. ïóíêò 5.2.
5.2 Ïîäâîä âîäû
Áëîê ïîäà÷è ïðîâîëîêè ñ ïîäâîäîì âîäû îáîðóäîâàí ñèñòåìîé îáíàðóæåíèÿ
ELP (ESAB Ëîãè÷åñêèé Íàñîñ), êîòîðàÿ ïðîâåðÿåò, ïðèñîåäèíåíû ëè øëàíãè
ïîäà÷è âîäû. Ïðè ïîäê ëþ÷åíèè ñâàðî÷íîãî ïèñòîëåòà ñ âîäÿíûì
îõëàæäåíèåì çàïóñêàåòñÿ âîäÿíîé íàñîñ.
Ôóíêöèÿ îáíàðóæåíèÿ ðàáîòàåò òîëüêî ñ òåìè èñòî÷íèêàìè ïèòàíèÿ, êîòîðûå
îáîðóäîâàíû ñèñòåìîé ELP.
bm50d1ra -- 1 1 --
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè
Ïðåæäå âñåãî óáåäèò å ñü â ò îì, ÷òî ïðîâîëîêà áåñïðåïÿòñòâåííî äâèæåòñÿ
÷åðåç íàïðàâëÿþùèå. Ïîñëå ýòîãî óñòàíîâèòå óñèëèå, ñîçäàâàåìîå
ðîëèêàìè ïîäà÷è ïðîâîëîêè. Ïîìíèòå, ÷òî ýòî óñèëèå íå äîëæíî áûòü
÷ðåçìåðíûì.
Ðèñ. 1 Ðèñ. 2
Äëÿ ïðîâåðêè ïðàâèëüíîñòè óñòàíîâêè óñèëèÿ ïîäà÷è ïîìåñòèòå êàêîé-ëèáî
òâåðäûé ïðåäìåò, íàïðèìåð, äåðåâÿííûé áðóñîê í à ïóòè ïîäà÷è ïðîâîëîêè.
Ïðè ðàññòîÿíèè ïðèìåðíî 5 ìì îò ïèñòîëåòà ä ëÿ ïîäà÷è ïðîâîëîêè äî
äåðåâÿííîãî áðóñêà (ðèñ. 1) ïîäàþùèå ðîëèêè äîëæíû ïðîñêàëüçûâàòü.
Ïðè ðàññòîÿíèè ïðèìåðíî 50 ìì ïðîâîëîêà äîëæíà ïîäàâàòüñÿ è ñãèáàòüñÿ
ïðè óïîðå â áðóñîê (ðèñ. 2).
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè â áëîê Feed 3004
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Îòñîåäèíèòå äàò÷èê äàâëåíèÿ, îòêèíóâ åãî íàçàä, ïðè ýòîì íàæèìíûå
ðîëèêè ïåðåäâèíóòñÿ ââåðõ.
S Ïðè íåîáõîäèìîñòè ñìîòàéòå îñòàòîê ïðîâîëîêè è ñíèìèòå êàòóøêó.
S Âûïðÿìèòå íîâóþ ïðîâîëîêó íà äëèíó 10-20 ñì. Ïðåæäå ÷åì ââîäèòü åå â
áëîê ïîäà÷è ïðîâîëîêè, óäàëèòå íàïè ëüíèêîì ñ òîðöà ïðîâîëîêè
çàóñåíöû è îñòðûå êðîìêè.
S Óáåäèòåñü â òîì, ÷òî ïðîâîëîêà ïðàâèëüíî ïîäàåòñÿ â êàíàâêó ïîäàþùèõ
ðîëèêîâ è â âûïóñêíóþ íàñàäêó èëè íàïðàâëÿþùóþ äëÿ ïðîâîëîêè.
S Çàêðåïèòå äàò÷èê äàâëåíèÿ.
S Çàêðîéòå áîêîâóþ ïàíåëü.
bm50d1ra -- 1 2 --
5.5 Çàìåíà è âñòàâêà ïð îâîëîêè â áëîê Feed 4804
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Ïðèæìèòå ïðèæèìíîå óñòðîéñòâî âíèç è ïîòÿíèòå åãî ê ñåáå è ââåðõ.
S Âûò àùèòå êàðåòêó.
S Ïðè íåîáõîäèìîñòè ñìîòàéòå îñòàòîê ïðîâîëîêè è ñíèìèòå êàòóøêó.
S Âûïðÿìèòå íîâóþ ïðîâîëîêó íà äëèíó 10-20 ñì. Ïðåæäå ÷åì ââîäèòü åå â
áëîê ïîäà÷è ïðîâîëîêè, óäàëèòå íàïè ëüíèêîì ñ òîðöà ïðîâîëîêè
çàóñåíöû è îñòðûå êðîìêè.
S Óáåäèòåñü â òîì, ÷òî ïðîâîëîêà ïðàâèëüíî ïîäàåòñÿ â êàíàâêó ïîäàþùèõ
ðîëèêîâ è â âûïóñêíóþ íàñàäêó èëè íàïðàâëÿþùóþ äëÿ ïðîâîëîêè.
S Ïîñò àâüòå êàðåòêó íà ìåñòî.
S Çàêðîéòå áîêîâóþ ïàíåëü.
5.6 Çàìåíà ïîäàþùèõ ðîëèêîâ â áëîêå Feed 3004
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Îòñîåäèíèòå äàò÷èê äàâëåíèÿ (1), îòêèíóâ åãî
âïåðåä.
S Îòñîåäèíèòå ïðèæèìíûå ðîëèêè (2), ïîâåðíóâ
îñü (3) íà 1/4 îáîðîòà ïî ÷àñîâîé ñòðåëêå è
âûòÿíóâ åå. Îòñîåäèíèòå ïðèæèìíûå ðîëèêè.
S Îòñîåäèíèòå ïîäàþùèå ðîëèêè (4), îòâèíòèâ
ãàéêè (5) è âûòÿíóâ ðîëèêè íàðóæó.
Äëÿ óñòàíîâêè ïîâòîðèòå âûøåîïèñàííûå
îïåðàöèè â îáðàòíîì ïîðÿäêå.
Âûáîð êàíàâîê â ïîäàþùèõ ðîëèêàõ
Ïîâåðíèòå ïîäàþùèé ðîëèê òàê, ÷òîáû ðàçìåðíàÿ ìåòêà
òðåáóåìîé êàíàâêè áûëà îáðàùåíà ê âàì.
5.7 Çàìåíà ïîäàþùèõ ðîëèêîâ â áëîêå Feed 4804
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Ïðèæìèòå ïðèæèìíîå óñòðîéñòâî (1) âíèç è
ïîòÿíèòå åãî ê ñåáå è ââåðõ.
S Âûòàùè òå êàðåòêó (2).
S Âûâèíòèòå âèíòû (3) ñ ãîëîâêîé ïîä òîðöîâûé
êëþ÷, êðåïÿùèå ïðîìåæó òî÷íóþ íàñàäêó íà
äåðæàòåëå, è èçâëåêèòå åå.
S Âûâèíòèòå êðåïåæíûé âèíò âûïóñêíîé
íàñàäêè (4) è î òâåäèòå íàñàäêó íàçàä.
S Ïîëíîñòüþ âûâèíòèòå âèíò ñ ãîëîâêîé ïîä
òîðöåâîé êëþ÷ (5).
S Îñëàáüòå äâà âíåøíèõ âèíòà (6) ñ ãîëîâêîé ïîä
òîðöåâîé êëþ÷ íà ïîë-îáîðîòà.
S Èçâëåêèòå ïîäàþùèå ðîëè êè (7).
Äëÿ óñòàíîâêè ïîâòîðèòå âûøåîïèñàííûå îïåðàöèè â îáðàòíîì ïîðÿäêå.
bm50d1ra -- 1 3 --
Âûáîð êàíàâîê â ïîäàþùèõ
ðîëèêàõ
Ïðè íåîáõîäèìîñòè ìåæäó
íàðóæíîé øàéáîé è ïîäàþùèì
ðîëèêîì óñòàíàâëèâàþòñÿ
ïðèâîäíûå øàéáû (íå áîëåå 2 øò.).
ÏÐÈÌÅ×ÀÍÈÅ! Ïðè çàìåíå
ïðèæèìíûõ ðîëèêîâ (8) ìåíÿåòñÿ âñÿ
êàðåòêà.
6ÒÅÕÍÈ×ÅÑÊÎÅ
ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòå ëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Ïðîâåðêà è ÷èñòêà
Áëîê ïîäà÷è ïðîâîëîêè
Ðåãóëÿðíî ï ðîâåðÿéòå, ÷òîáû áëîê ïîäà÷è ï ðîâîëîêè íå áûë çàáèò ãðÿçüþ.
S Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåíîé ïåðèîäè÷íîñòüþ âûïîëíÿòü î÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ìåõàíèçìà áëîêà ïîäà÷è. Èìåéòå ââèäó, ÷òî
åñëè ïðåäâàðèòåëüíîå íàòÿæåíèå óñòàíîâëåíî ñëèøêîì ñèëüíûì, òî ýòî
ìîæåò ïðèâåñòè ê ïîâûøåííîìó èçíîñó ïðèæèìíûõ ðîëèêîâ, ïîäàþùèõ
ðîëèêîâ è íàïðàâëÿþùèõ ä ëÿ ïðîâîëîêè.
Òîðìîçíàÿ âòóëêà.
Òîðìîçíàÿ âòóëêà ðåãó ëèðóåò ñÿ ïåðåä
ïîñòàâêîé èçäåëèÿ. Ïðè íåîáõîäèìîñòè
ïîâòîðíîé ðåãóëèðîâêè ïðèäåðæèâàéòåñü
óêàçàíèé ïðèâåäåííûõ íèæå. Ïðè ïðàâèëüíî
îòðåãóëèðîâàííîé òîðìîçíîé âòóëêå
ïðîâîëîêà äîëæíà íåñêîëüêî
ïðîâèñàòü ïîñëå îñòàíîâêè ïîäà÷è.
S Ðåãóëèðîâêà òîðìîçíîã î óñèëèÿ:
S Óñòàíîâèòü êðàñíóþ ðóêîÿòêó â ïîëîæåíèå áëîêèðîâêè
S Âñòàâèòü îòâåðòêó â ï ðóæèíû èìåþùèåñÿ âî âò óëêå.
Äëÿ óìåíüøåíèÿ òîðìîçíîãî óñèëèÿ ïîâåðíóòü ïðóæèíû ïî ÷àñîâîé
ñòðåëêå.
Äëÿ óâåëè÷åíèÿ òîðìîçíîãî óñèëèÿ ïîâåðíóòü ïðóæèíû ïðîòèâ ÷àñîâîé
ñòðåëêè. Ïðèìå÷àíèå: Îáå ïðóæèíû ñëåäóåò ï îâîðà÷èâàòü íà
îäèíàêîâîå ÷èñëî îáîðîòîâ.
bm50d1ra -- 1 4 --
Ñâàðî÷íàÿ ãîðåëêà
S Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåííîé ïåðèîäè÷íîñòüþ âûïîëíÿòü ÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ñâàðî÷íîé ãîðåëêè. Ðåãóëÿðíî äî÷èñòà
ïðîäóâàéòå íàïðàâëÿþùèå ä ëÿ ïðîâîëîêè è î÷èùàéòå êîíòàêòíóþ ã óáêó.
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
ENGLISH
-- 1 5 --
TOCe
8SAFETY 16...........................................................
9 INTRODUCTION 18...................................................
9.1 Equipment 18................................................................
9.2 Control panel 18.............................................................
10 TECHNICAL DATA 19.................................................
11 INSTALLATION 19....................................................
11.1 Lifting instructions 20.........................................................
12 OPERATION 20.......................................................
12.1 Connections and control devices 21............................................
12.2 Water connection 21..........................................................
12.3 Wire feed pressure 22........................................................
12.4 Replacing and inserting Feed 3004 wire 22......................................
12.5 Replacing and inserting Feed 4804 wire 22......................................
12.6 Changing feed rollers on Feed 3004 23..........................................
12.7 Changing feed rollers on Feed 4804 23..........................................
13 MAINTENANCE 24....................................................
13.1 Inspection and cleaning 24....................................................
14 ORDERING SPARE PARTS 24..........................................
DIAGRAM 26............................................................
ORDERING NUMBER 27.................................................
WEAR PARTS 28........................................................
ACCESSORIES 32.......................................................
-- 1 6 --
bm50d1ea
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, declares that Wire feed unit Feed 3004,
Feed 4804 from serial number 745 are constructed and tested in compliance with the standard EN
60974--5 and EN 60974--10 (Class A) in accordance with the requirements of directive (2006/95/EC)
and (2004/108/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director
Equipment and Automation
Laxå 2008--01--04
8SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
-- 1 7 --
bm50d1ea
WARNING
Read and understand the instruction manual before installing or operating.
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
Ask for your employer’s safety practices which should be based on manufacturers’ hazard data.
ELECTRIC SHOCK - Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES - Can be dangerous to health
S Keep your head out of the fumes.
S Use v entilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS - Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE - Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION - Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
CAUTION!
Read and understand the instruction manual before
installing or operating.
CAUTION!
Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low--voltage supply
system. There may be potential difficulties in ensuring electromagnic
compatibility of class A equipment in those locations, due to conducted
as well as radiated disturbances.
CAUTION!
This product is solely intended for arc welding.
-- 1 8 --
bm50d1ea
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
ESAB can provide you with all necessary welding p rotectio n and accessories.
9 INTRODUCTION
The wire feed units Feed 3004 / Feed 4804 with control panel MA23 or MA24 are
intended for MIG/MAG welding together with 400A, 500A and 600A CAN
welding power sources.
The wire feed units contain four--wheel drive wire feed mechanisms as well as
control electronics.
They can be used together with wire on ESAB’s MarathonPact, or on wire bobbin
(standard Ø 300 mm, accessory Ø 440 mm).
The wire feed unit can be installed either on the power source trolley, suspended above
the workplace, on a counter balance device or on the floor with or without wheel set.
ESAB’s accessories for the product can be found on page 32.
9.1 Equipment
The wire feed unit is supplied with:
S instruction manual for the wire feed unit
S instruction manual in English for the control panel
S decal with recommended wear parts.
9.2 Control panel
The wire feed unit is supplied with one of the following control panels:
MA23
Knobs for setting the voltage and the wire feed speed /
current. Other settings with push buttons.
MA24
Knobs for setting the voltage / QSett and the wire feed
speed / current. Other settings with push buttons.
See the separate instruction manual for a detailed description of the control panels.
-- 1 9 --
bm50d1ea
10 TECHNICAL DATA
Feed 3004 Feed 4804
Mains voltage 42 V 50--60 Hz 42 V 50--60 Hz
Power requirement 336 VA 378 VA
Motor current I
max
8A 9A
Wire feed speed 0.8 -- 25.0 m/min 0.8 -- 25.0 m/min
Gun connection EURO EURO
Max. diameter wire bobbin 300 mm (*440 mm) 300 mm (*440 mm)
Wire dimension
Fe
Ss
Al
Cored wire
0.8 -- 1.6 mm
0.8 -- 1.6 mm
1.0 & 1.6 mm
0.9 -- 1.6 mm
0.8 -- 2.4 mm
0.8 -- 2.4 mm
1.0 & 2.4 mm
0.9 -- 2.4 mm
Weight 15 kg 19 kg
Dimensions (l x w x h) 690 x 275 x 420 mm 690 x 275 x 420 mm
Operating temperature -- 1 0 t o + 4 0 ˚C -- 1 0 t o + 4 0 ˚C
Shielding gas
max pressure
All types intended for
MIG/MAG welding
0.5 MPa ( 5 bar)
All types intended for
MIG/MAG welding
0.5 MPa ( 5 bar)
Type of cooling
max pressure
50 % water /
50 % mono--ethylene glycol
0.5 MPa ( 5 bar)
50 % water /
50 % mono--ethylene glycol
0.5 MPa ( 5 bar)
Maximum permissible load at
60% duty cycle
500 A 500 A
Enclosure class IP23 IP23
* Accessories, see page 32.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
11 INSTALLATION
The installatio n must be executed b y a p rofession al.
WARNING!
When welding in an environment with increased electrical danger, only power
sources intended for this environment may be used. These power sources are
marked with the symbol
-- 2 0 --
bm50d1ea
11.1 Lifting instructions
Order number for lifting eyelet can be found on page 32.
NOTE! If another mounting device is used, this must be electrically insulated from
the wire feed unit.
12 OPERATION
General safety regulations for the handling of the equipment can be found on
page 16. Read through before you start using the equipment!
When moving the equipment use intended handle. NOTE! Never pull on the gun.
WARNING!
Assure that the side panels are closed during operation.
WARNING!
T o prevent the reel from sliding off the hub: Lock the
reel in place by turning the red knob as shown on the
warning label attached next to the hub.
WARNING!
Rotating parts can cause injury, take great care.
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
ESAB Aristo Feed 4804 Používateľská príručka
- Kategória
- Zvárací systém
- Typ
- Používateľská príručka
v iných jazykoch
- English: ESAB Aristo Feed 4804 User manual
Súvisiace články
Ostatné dokumenty
-
Parkside PFDS 120 A2 Assembly, Operating And Safety Instructions
-
-
Prology iREG-7000 SHD Používateľská príručka
-
Electrolux EOB9897X Používateľská príručka
-
3M SPEEDGLAS SL Používateľská príručka
-
Indesit K1G21S(W)/R Užívateľská príručka
-
Aeg-Electrolux E9971-4-M NORDIC R05 Používateľská príručka
-
-
Indesit K3G21 S(W)R Používateľská príručka
-
PIKO PREMIUM Train Set BR 221 Instructions For Use Manual