Silvercrest 78917 Operating Instructions Manual

HAIR & BEARD CLIPPERS SHBS 600 A1

IAN 78917

HAIR & BEARD CLIPPERS

Operating instructions

HAJ- ÉS SZAKÁLLVÁGÓ

Kezelési útmutató

ZASTŘIHOVAČ VLASŮ A VOUSŮ

Návod k obsluze

HAAR- UND BARTSCHNEIDER

Bedienungsanleitung

MASZYNKA DO STRZYŻENIA

WŁOSÓW I BRODY

Instrukcja obsługi

APARAT ZA STRIŽENJE ZA

LASE IN BRADO

Navodilo za uporabo

STROJČEK NA STRIHANIE E

VLASOV A BRADY

Návod na obsluhu

GRA78917_Haar und Bartschneider_Cover_LB4.indd 2 13.09.12 16:05

English........................................................................... 2

Polski .......................................................................... 16

Magyar ....................................................................... 30

Slovenšina ................................................................. 46

esky .......................................................................... 58

Slovenina................................................................... 72

Deutsch ....................................................................... 86

ID: SHBS 600 A1_12_V1.2

__GRA78917_B4.book Seite 1 Mittwoch, 5. September 2012 6:49 18

Overview / Przegld / Áttekintés / Pregled / Pehled /

Prehad / Übersicht

1

2

4

5

7

6

8

3

9

10

__GRA78917_B4.book Seite 2 Mittwoch, 5. September 2012 6:49 18

2

GB

Contents

1. Intended purpose ...............................................................4

2. Safety information ..............................................................4

3. Items supplied ....................................................................7

4. Charging ............................................................................7

5. Operation ...........................................................................8

5.1 Pushing on/removing the comb attachments.............................. 8

5.2 Cutting hair........................................................................... 8

5.3 Thinning hair......................................................................... 9

5.4 Cutting hairlines and beard..................................................... 9

6. Cleaning and care .............................................................10

7. Disposal ...........................................................................11

8. Problem-solving ...............................................................12

9. Technical specifications .....................................................13

10. Warranty of the HOYER Handel GmbH ..............................13

Overview

1 Comb attachment, adjustable

2 Blades, part of the shaving head

3 Slider for thinning function

4 Comb attachment fastener

5 On/off switch

6 Charging indicator

lit green: device in operation

lit red: batteries almost empty

flashing red during charging: batteries are being charged

flashing green during charging: batteries are charged

7 Connection for power unit

8 Marking of the cutting length in mm

9 Shaving head

10 Slider for adjusting the cutting lengths of the comb attachment

__GRA78917_B4.book Seite 2 Freitag, 7. September 2012 4:47 16

3

GB

Thank you for your trust!

Congratulations on your new hair and beard trimmer.

For a safe handling of the device and in order to get to know the entire scope of

features:

• Thoroughly read these operating instructions prior to initial

commissioning.

• Above all, observe the safety instructions!

• The device should only be used as described in these operat-

ing instructions.

• Keep these operating instructions for reference.

• If you pass the device on to someone else, please include

these instructions.

We hope you enjoy your new hair and beard trimmer!

__GRA78917_B4.book Seite 3 Mittwoch, 5. September 2012 6:49 18

4

GB

1. Intended purpose

The hair and beard trimmer is intended exclusively for trimming human hair.

Only use the device for dry hair.

The device is designed for private home use and must not be used for commer-

cial purposes. The device must only be used indoors.

Foreseeable misuse

WARNING! Risk of material damage!

Do not use the device to cut artificial hair or animal hair.

2. Safety information

Warnings

If necessary, the following warnings will be used in these operating instructions:

DANGER! High risk: failure to observe this warning may result in injury

to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury

or serious material damage.

CAUTION: low risk: failure to observe this warning may result in minor injury

or material damage.

NOTE: circumstances and specifics that must be observed when handling the

device.

DANGER for children

• Packing materials are not children's toys. Children should not be allowed

to play with the plastic bags. There is a risk of suffocation.

• This device is not designed to be used by people (including children) with

limited physical, sensory or mental capabilities or people without adequate

experience and/or understanding unless they are supervised by someone re-

sponsible for their safety or are instructed by them on how to use the device.

• Children must be supervised to ensure that they do not play with the de-

vice.

• Keep the device out of the reach of children.

DANGER! Risk of electric shock due to moisture

• Do not use this device in the vicinity of bathtubs, showers, washbasins or

other vessels containing water.

__GRA78917_B4.book Seite 4 Mittwoch, 5. September 2012 6:49 18

5

GB

• Protect the device from moisture, water drops and water spray.

• Never touch the device with wet hands.

• The device, the cable and the power unit must not fall into water or other

liquids and must not be rinsed under running water.

• If the device has fallen into water, pull out the power unit immediately, and

only then remove the device from the water. Do not use the device again,

but have this checked by a specialist.

• Should liquid enter the device, have it checked before starting the device

up again.

• If the device is used in a bathroom, the power unit must be pulled out after

use, as the proximity of water represents a hazard, even when the device is

switched off.

• Installation of a residual current device (FI/RCD) with a rated residual oper-

ating current of no more than 30 mA is recommended to provide addition-

al protection. Ask your electrician for advice. The installation should only

be carried out by a qualified electrician.

DANGER! Risk of electric shock

• Never put the device into operation if there are visible damages to the de-

vice, the power unit or the cable or if the device has been dropped before.

• Connect the cable to the device before plugging the power unit into a wall

socket.

• Only connect the power unit to a properly installed, easily accessible wall

socket, the voltage of which corresponds to the specifications on the rating

plate. The wall socket must continue to be easily accessible after the device

is plugged in.

• Ensure that the cable cannot be damaged by sharp edges or hot surfaces.

• Ensure that the cable is not trapped or crushed.

• When removing the power unit from the wall socket, always pull the power

unit and never the cable.

• Pull the power unit out of the wall socket …

… after every use,

… after each charging process,

… if there is a fault,

… before connecting the device to the cable,

… before you clean the device, and

… during thunderstorms.

• To avoid any risk, do not make modifications to the device. Repairs must be

carried out by a specialist workshop or the Service Centre.

__GRA78917_B4.book Seite 5 Mittwoch, 5. September 2012 6:49 18

6

GB

DANGER from batteries

• Protect the batteries against mechanical damages.

Fire hazard!

• Do not expose the device to direct sunshine or heat. The ambient tempera-

ture should not be lower than -10 °C and higher than +40 °C.

• The charge contacts on the device must not be connected by metallic ob-

jects.

• The batteries may only be charged with the original accessory (power

unit).

• The batteries only removed for disposal must not be used again.

• Should the electrolyte solution leak out of the batteries, avoid contact with

eyes, mucous membranes and skin. Rinse immediately with plenty of clean

water and consult a doctor. The electrolyte solution can cause irritation.

WARNING! Risk of cut injuries

• The tips of the comb attachments and shaving head are sharp. Handle with

care.

• Do not use the device if the attachment shows damages.

• Switch off the device before pinning up or changing the attachments and

each time before cleaning.

WARNING! Risk of injury

• Place the cable in such a way that no one trips over it or steps on it.

• Do not use the device on open wounds, cuts, sunburn or blisters.

WARNING! Risk of material damage

• Only use the original accessories.

• Never place the device on hot surfaces (e.g. hob plates) or near heat

sources or open fire.

• Do not cover the power unit to prevent overheating.

• The blades of the shaving head may only be cleaned with medical alcohol.

Do not use any water or other liquids.

• Do not use any astringent or abrasive cleaning agents.

__GRA78917_B4.book Seite 6 Mittwoch, 5. September 2012 6:49 18

7

GB

3. Items supplied

1 hair and beard trimmer

1 power unit

2 adjustable comb attachments:

attachment 1: 4/7/10/13/16 mm

attachment 2: 18/21/24/27/30 mm

1 comb

1 scissors

1 cleaning brush

1 oil

1 storage pouch

1 set of operating instructions

4. Charging

NOTES:

• The batteries of the hair and beard cutter reach their maximum power after

they have been charged and discharged three times. Before the device is

used for the first time, and during the following three charging procedures,

the device should be charged for 12 hours in each case.

• When the batteries are almost flat, the charging indicator changes colour

from green to red during operation. The device can then only be used for a

short time without being connected to the electricity supply.

1. Switch off the device with the on/off switch5 if necessary.

2. Connect the power unit to the connector7 of the device.

3. Insert the power unit into a readily accessible wall socket whose voltage

matches the voltage stated on the rating plate.

4. The charging indicator6 flashes red and the batteries are charged. When

the batteries are fully charged, the charging indicator flashes green. When

the batteries are fully charged, the device can be used for approximately

60 minutes without being connected to the power supply.

__GRA78917_B4.book Seite 7 Mittwoch, 5. September 2012 6:49 18

8

GB

5. Operation

Regardless of the charging state of the batteries, you are always able to use the

hair and beard trimmer with the power pack.

1. In order to use the power pack, ensure that the device is switched off.

2. Connect the power unit to the connector7 of the device.

3. Insert the power unit into a readily accessible wall socket whose voltage

matches the voltage stated on the rating plate.

4. Switch on the device with the on/off switch5.

5.1 Pushing on/removing the comb attachments

WARNING! Risk of injury!

Switch off the device before replacing or changing the comb attachments.

Pushing on

• In order to attach a comb attachment, push this over the guide rails on the

side of the device onto the comb attachment fastener4, until it is heard to

click into place.

Removing

1. Figure A: to change the comb attachments, turn the device onto its back.

2. Figures B/C: push the comb attachment1 upwards together with the slid-

er10. Push the comb attachment carefully upwards with moderate force us-

ing your thumb and index finger beyond the side locking pins. The comb

attachment is released from the comb attachment fastener4.

3. Remove the comb attachment.

5.2 Cutting hair

NOTES:

• The hair to be dressed must be dry.

• The cutting length may deviate depending on the cutting angle.

• Place a sheet or cape around throat and neck to prevent cut-off hair from

dropping into the collar.

• Comb the hair well.

__GRA78917_B4.book Seite 8 Mittwoch, 5. September 2012 6:49 18

9

GB

• First, start with a comb attachment with a longer cutting length and then, in

the course of the cutting process, use shorter cutting lengths step by step. Ad-

just the cutting length with the slider10 and read off the cutting lengths on

the marker8 on the side of the comb attachment1.

• Start by cutting the hair in the neck or on the sides and cut towards the cen-

tre of the head. Then, cut the front section of the hair towards the centre of

the head.

• Hold the device in such a way that the comb attachment lies as flat as pos-

sible on the head. Move the device evenly through the hair.

• If possible, cut against direction of hair growth.

• In order to catch all the hair, move the device several times through each

section of the hair.

• Comb the hair repeatedly and well.

• In order to achieve a straight cutting line for cutting lengths over 20 mm,

the device should be passed through the hair several times from different di-

rections.

5.3 Thinning hair

Use the thinning function to reduce the volume of the hair without changing its

length.

• Push the slider3 to the left. The thinning function integrated into the shav-

ing head9 is extended upwards.

5.4 Cutting hairlines and beard

WARNING! Risk of injury!

The points of the shaving head are sharp. Handle with care

.

• Adjust the cutting length with the slider10 according to the desired hair

length and read off the cutting length using the marking8 on the side of

the comb attachment1. Now, shorten your beard step-by-step.

• Use the device only with the shaving head and without comb attach-

ment9, to cut hair very short or to cut beard and hairline. In this way you

can cut hair lengths of 1-2 mm evenly.

__GRA78917_B4.book Seite 9 Mittwoch, 5. September 2012 6:49 18

10

GB

6. Cleaning and care

DANGER! Risk of electric shock!

Pull the power unit out of the wall socket before you clean the device.

WARNING! Risk of injury!

Always switch off the device before cleaning it.

WARNING! Risk of material damage!

• The blades2 of the shaving head9 may only be cleaned with medical al-

cohol. Do not use any water or other liquids. Oil the blades as described in

the following chapter.

• Do not use any astringent or abrasive cleaning agents.

NOTE: Clean and oil the device after every use.

• Remove the comb attachment1. Rinse the comb attachment with water and

let it dry before reattaching it to the device.

• Wipe down the housing of the device with a damp cloth.

Cleaning and oiling the shaving head

1. Figure D: remove the shaving head9 from the device by pressing it with

the thumb towards the rear.

2. Remove the hair remnants from the shaving head by using the cleaning

brush included in the delivery.

3. Clean the blades2 of the shaving head9 with medical alcohol (not sup-

plied). Do not use any water or other liquids. Let dry the shaving head.

4. Apply a few drops of the supplied oil to the blades2 of the shaving

head9 and spread it out evenly. Using a soft cloth, wipe off the surplus oil,

if necessary. Only use acid-free oil, such as e.g. sewing machine oil.

5. Figure E: guide the lug of the shaving head9 under the edge of the hous-

ing and press the shaving head downwards onto the blades until it is heard

to lock in place.

__GRA78917_B4.book Seite 10 Mittwoch, 5. September 2012 6:49 18

11

GB

7. Disposal

The symbol showing a wheelie bin crossed through indicates that

the product requires separate refuse collection in the European Un-

ion. This applies to the product and all accessories marked with this

symbol. Products identified with this symbol may not be discarded

with normal household waste, but must be taken to a collection

point for recycling electric and electronic appliances. Recycling

helps to reduce the consumption of raw materials and protect the

environment.

Packaging

When disposing of the packaging, make sure you comply with the environmen-

tal regulations applicable in your country.

Removing the batteries

• This device is operated with two rechargeable nickel-metal-hydride batteries,

which you must remove before disposing of the device.

• You must be technically minded to remove the batteries, otherwise there is

the danger of injuring yourself. If you do not have any experience with

tools, you should have the batteries removed by a person who is qualified

to do this.

DANGER from batteries!

• Ensure that the batteries are not damaged as you remove it. Fire hazard!

• The removed batteries must not be disassembled.

• Never short-circuit the batteries. The contacts on the removed batteries must

not be connected by metallic objects. The batteries may overheat and ex-

plode.

• Only remove the batteries to dispose of the device. The device is destroyed

by removing the batteries. Never try to operate a disassembled device.

1. Disconnect the device from the mains.

2. Switch on the device and let it run until the batteries are empty.

3. Figure D: remove the shaving head9 from the device (see “Cleaning and

care” on page 10).

4. Figure F: use a Phillips screwdriver to release the 3 screws on the back of

the device.

5. Figure G: use a screwdriver to lever open the side seam and unfold the

two halves of the housing apart.

__GRA78917_B4.book Seite 11 Mittwoch, 5. September 2012 6:49 18

12

GB

6. Figures H+I: press the black fastening clips carefully away from the sides

of the board and remove the board from its fastening.

7.

Figure J:

release the connections between the batteries and the board with a

pair of pliers/wire cutters. Remove the exposed batteries. Take the batteries and

the device separately to suitable disposal.

The nickel-metal hydride batteries used for this device may not be

treated as household waste. The batteries must be disposed of

properly. Contact battery distributors or local waste disposal

points for this.

8. Problem-solving

If your device fails to function as required, please try this checklist first. Perhaps

there is only a minor problem, and you can solve it yourself.

DANGER! Risk of electric shock!

Do not attempt to repair the device yourself under any circumstances.

Fault Possible causes/Action

No function

• Has the device been connected to the power

supply?

• Are the batteries empty?

The blades



2

of the shav-

ing head

9

are not running

smoothly

• Has the shaving head been cleaned and the

blades oiled?

NiMH

__GRA78917_B4.book Seite 12 Mittwoch, 5. September 2012 6:49 18

13

GB

9. Technical specifications

Subject to technical modification.

10. Warranty of the HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase date.

In the event of product defects, you are entitled to statutory rights against the ven-

dor. These statutory rights are not restricted by our warranty presented in the fol-

lowing.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original pur-

chase receipt in a safe place. This document is required to verify the purchase.

If within three years from the purchase date of this product a material or factory

defect occurs, the product will be repaired or replaced by us – at our discretion

– free of charge to you. This warranty implies that within the period of three years

the defective device and the purchase receipt are presented, including a brief

written description of the defect and the time it occurred.

If the defect is covered by our warranty, the repaired or a new product will be

returned to you. No new warranty period starts with a repair or replacement of

the product.

Model: SHBS 600 A1

Device: Input: 3.6 V , , 800 mA

Power unit

(Model SW-036080EU):

Input: 100-240 V ~ 50/60 Hz, 0.2 A max

Output: 3.6 V , , 800 mA

Protection class of the power unit:

II

Ambient conditions: only approved for indoor use

Batteries, rechargeable: 2x 1.2 V NiMH, 600 mAh, Type HR6 AA

Operating temperature: -10 °C to +40 °C

__GRA78917_B4.book Seite 13 Mittwoch, 5. September 2012 6:49 18

14

GB

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed. This

also applies to replaced and repaired parts. Any damages and defects already

existing at the time of purchase must be reported immediately upon unpacking.

Repairs arising after the expiration of the warranty period are subject to a

charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and tested

diligently prior to delivery.

The warranty applies to material or factory defects. This warranty does not include

product parts that are subject to standard wear and therefore can be considered

wear parts; the same applies to damages at fragile parts, e.g. switches, recharge-

able batteries or parts made of glass.

This warranty expires if the product is damaged, not used as intended or not serv-

iced. For the proper operation of the product, all instructions listed in the operating

instructions must be observed carefully. Any form of use and handling that is ad-

vised against in the operating instructions or warned against must always be

avoided.

The product is only intended for private and not for commercial use. In the case of

incorrect and improper treatment, use of force and interventions not performed by

our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the follow-

ing notes:

• Please keep the article number IAN: 78917 and the purchase receipt as a

purchase verification for all inquiries.

• If faulty operation or other defects occur, first contact the Service Centre list-

ed in the following by telephone or email.

• Then, you are able to send a product reported as defective free of charge to

the service address specified to you, including the purchase receipt and the

information on the defect and when it occurred.

Please visit www.lidl-service.com to download this and many other

manuals, product videos and software.

__GRA78917_B4.book Seite 14 Mittwoch, 5. September 2012 6:49 18

15

GB

Service Centre

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: hoyer@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak)), (0,06 EUR/Min., (off peak))

E-Mail: hoyer@lidl.ie

IAN: 78917

Supplier

Please note that the following address is no service address. First contact the

aforementioned Service Centre.

HOYER Handel GmbH

Kühnehöfe 5

22761 Hamburg

Germany

GB

IE

__GRA78917_B4.book Seite 15 Mittwoch, 5. September 2012 6:49 18

16

PL

Spis treci

1. Uycie zgodne z przeznaczeniem.......................................18

2. Wskazówki bezpieczestwa ..............................................18

3. Zakres dostawy ................................................................21

4. adowanie ........................................................................21

5. Obsuga ............................................................................22

5.1 Nakadanie/zdejmowanie nasadek grzebieniowych ................22

5.2 Cicie wosów......................................................................23

5.3 Przerzedzanie wosów ..........................................................23

5.4 Przycinanie konturów i brody .................................................24

6. Czyszczenie i pielgnacja ...................................................24

7. Utylizacja ..........................................................................25

8. Rozwizywanie problemów ..............................................26

9. Dane techniczne.................................................................27

10. Gwarancja firmy HOYER Handel GmbH .............................27

Przegld

1 Nasadka grzebieniowa, moliwo ustawienia rónych dugoci

2 Ostrza, cz gowicy tncej

3 Suwak do funkcji przerzedzania

4 Mocowanie nasadki grzebieniowej

5 Wcznik/wycznik

6 Kontrolka poziomu naadowania

wiecca na zielono: urzdzenie pracuje

wiecca na czerwono: akumulatory prawie rozadowane

migajca na czerwono podczas adowania: trwa adowanie akumulato-

rów

migajca na zielono podczas adowania: akumulatory s naadowane

7 Gniazdo do podczenia zasilacza

8 Oznaczenie dugoci cicia w mm

9 Gowica tnca

10 Suwak do zmiany dugoci cicia nasadki grzebieniowej

__GRA78917_B4.book Seite 16 Mittwoch, 5. September 2012 6:49 18

17

PL

Serdecznie dzikujemy za zaufanie!

Gratulujemy Pastwu zakupu nowej maszynki do strzyenia wosów i brody.

Aby móc bezpiecznie posugiwa si urzdzeniem ipozna cay zakres jego

moliwoci:

• Przed pierwszym uruchomieniem naley dokadnie

przeczyta niniejsz instrukcj obsugi.

• Naley przede wszystkim przestrzega wskazówek

bezpieczestwa!

• Urzdzenie wolno obsugiwa wycznie w sposób opisany

w niniejszej instrukcji obsugi.

• Instrukcj obsugi naley zachowa do póniejszego uycia.

• W przypadku dalszego przekazania urzdzenia naley

doczy do niego instrukcj obsugi.

yczymy Pastwu duo radoci z nowo zakupionej maszynki do strzyenia wo-

sów i brody!

__GRA78917_B4.book Seite 17 Mittwoch, 5. September 2012 6:49 18

18

PL

1. Uycie zgodne z przeznaczeniem

Maszynka do strzyenia wosów i brody przeznaczona jest wycznie do strzy-

enia ludzkich wosów. Urzdzenie naley stosowa wycznie do suchych

wosów.

Urzdzenie zaprojektowano do uytku prywatnego i nie wolno go uywa w

celach komercyjnych. Z urzdzenia mona korzysta wycznie w pomieszcze-

niach zamknitych.

Przewidywalne uycie niezgodne z przeznaczeniem

OSTRZEENIE przed szkodami materialnymi!

Zabrania si strzyenia wosów sztucznych lub zwierzcych.

2. Wskazówki bezpieczestwa

Ostrzeenia

Jeeli jest to konieczne, w niniejszej instrukcji pracy stosuje si nastpujce

ostrzeenia:

NIEBEZPIECZESTWO! Wysokie ryzyko: Nieprzestrzeganie tego

ostrzeenia moe by przyczyn szkód na zdrowiu i yciu.

OSTRZEENIE! rednie ryzyko: Nieprzestrzeganie tego ostrzeenia moe

by przyczyn obrae lub strat materialnych.

OSTRONIE: Niskie ryzyko: Nieprzestrzeganie tego ostrzeenia moe by

przyczyn lekkich obrae lub strat materialnych.

WSKAZÓWKA: Cechy i sposób zachowania, na które naley zwraca

uwag podczas pracy z urzdzeniem.

NIEBEZPIECZESTWO – zagroenie dla dzieci

• Materia opakowania nie jest zabawk dla dzieci. Dzieci nie mog bawi

si workami z tworzywa sztucznego. Istnieje ryzyko uduszenia.

• Opisywane urzdzenie nie jest przeznaczone do obsugi przez osoby (w

tym równie dzieci) o ograniczonych zdolnociach fizycznych,

sensorycznych lub umysowych lub nieposiadajcych wystarczajcego

dowiadczenia i/lub wiedzy; chyba e bd one korzystay z niego pod

nadzorem osoby odpowiedzialnej za ich bezpieczestwo lub te otrzymaj

od niej stosowne wskazówki dotyczce jego prawidowej obsugi.

• Dzieci musz pozostawa pod nadzorem osób dorosych, co wykluczy

ryzyko zabawy urzdzeniem.

• Nieuywane urzdzenie naley zabezpieczy przed dostpem dzieci.

__GRA78917_B4.book Seite 18 Freitag, 7. September 2012 4:48 16

Stránka sa načítava...

Silvercrest 78917 Operating Instructions Manual

Tento návod je vhodný aj pre

Silvercrest 78917 Operating Instructions Manual

v iných jazykoch

Súvisiace články

Ostatné dokumenty