LG VR64701LVMP Návod na obsluhu

OWNER’S MANUAL

CLEANING ROBOT

www.lg.com

Before using, please carefully read the Safety Precautions

pages to allow for safe operation of the product. After

reading the operation manual, please keep it in an easily

accessible location.

VR626** Ser.

VR627** Ser.

VR647** Ser.

ENGLISH

CZECH

SLOVENSKÝ

FEATURES

Corner Master

By having adopted a brand new concept design that is appropriate for

walls, the Robot Cleaner's cleaning performance is incredibly efﬁcient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment

via its Smart Operation feature for smarter cleaning.

Turbo Mode

In the "Turbo" mode, the Robot Cleaner runs more powerful giving

cleaner results.

When selected, the "Turbo" mode is automatically activated on carpets,

which enables the Robot Cleaner to run more efﬁciently.

Drawer Mop Plate

The "Drawer mop plate" makes it much easier for users to change the

mop without having to ﬂip the device over.

My Space Mode

By commanding it to clean a particular space, the Robot Cleaner quickly

cleans the desired space.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Location Search Function

When the Robot Cleaner is moved from a spot while operating, the

device will automatically search for the previous location and return to the

spot from where it was interrupted.

ENGLISH

CONTENTS

Safety precautions

Included with product

Parts description

Button functions

Display status information

Before you start

Overview

1

BEFORE USING

2

METHOD OF USE

3

HANDLING METHOD AFTER USE

36~38

39

How to install the home station

How to turn the Robot Cleaner power

supply on & off

How to start and stop cleaning

How to charge the battery

Cleaning modes

Auxiliary cleaning modes

Time setting

Scheduled cleaning

Mop cleaning (option)

Location search function

Smart diagnosis

Cleaning the dust bin

Cleaning the dust bin ﬁlter

Cleaning the brush

Cleaning the sensor/charging terminal

Cleaning the side brush

Cleaning the ultra microﬁber mop (option)

4

ADDITIONAL INFORMATION

5

REFERENCE

2~6

7

8~9

10~11

12

13

14

15

16

17

18~19

20~21

22~23

24

25

26

27

28~29

30

31

32

33

34

35

Troubleshooting

Before you call for service

Product speciﬁcations

Reference items

40

41

2

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and

correctly to prevent any unexpected risk of injury or damage.

WARNING

1. This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

2. Children should be supervised to ensure that they do

not play with the appliance.

3. If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard

4. This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance must not be made by children without

supervision.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can

result in property damage and/or serious bodily harm or death.

Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

WARNING

CAUTION

3

ENGLISH

SAFETY PRECAUTIONS

WARNING

For your safety, do not remove

the battery from the Robot

Cleaner. If you need to replace

the battery or the Robot

Cleaner, take it to the nearest

authorized LG Electronics

service center or dealer for

assistance.

Failure to follow this warning can

cause ﬁre or product failure.

Never use the Robot Cleaner

with a battery and/or home

station from any other product

than the Robot Cleaner.

Doing so can cause ﬁre or

product failure.

Make sure the power cord of

the home station is not crushed

under a heavy object or

damaged by contact with sharp

objects.

Failure to follow this warning

can cause electric shock, ﬁre

or product failure. If the power

cord is broken, do not plug it

in. Take the product to an LG

Electronics Authorised service

repairer.

Do not place the home

station and the Robot Cleaner

near a heating device.

Doing so can cause product

deformation, ﬁre, or product

failure.

Do not use the Robot

Cleaner when candles or

fragile objects are placed

on the ﬂoor.

Doing so can cause ﬁre or

product failure.

Always use a dedicated power

outlet with a 10 amp rating.

If multiple appliances are

connected to an outlet

simultaneously, they can

generate enough heat to cause

a ﬁre.

Do not force the power plug

to bend. Do not use the power

plug when it has been damaged

or loosened.

Doing so can cause ﬁre or

product failure.

When pulling out the home

station power plug, always pull

it out by grabbing the plug, not

the cord. When pulling out the

power plug, do not to touch the

prongs with your ﬁngers.

Doing so can cause an electric

shock.

Do not touch the power plug

with wet hands.

Doing so can cause electric

shock.

Do not allow children or pets

to play with or rest upon the

Robot Cleaner at any time. Do

not use the Robot Cleaner while

an object is hanging from it.

Doing so can cause injury or

product damage.

4

SAFETY PRECAUTIONS

Do not insert any part of the

body, such as a hand or foot,

below the brush or wheels of

the Robot Cleaner while in use.

Doing so can cause injury or

product damage.

Do not operate the Robot

Cleaner on narrow and high

furniture such as a wardrobe,

refrigerator, desk, table, etc.

Doing so can cause injury,

product failure or damage which

is not covered by the warranty.

Do not operate the Robot

Cleaner in a room where a child

is sleeping.

Doing so can cause injury or

product damage.

Do not leave Children or

pets near the Robot Cleaner

unsupervised.

Doing so can cause injury or

product damage.

This product is intended for indoor domestic

home use and should not be used in mobile

applications. it should not be used in

commercial applications such as workshops

or garage, etc.

Do not activate the device on a

ﬂoor that has more than a 10

degree incline.

The device may not work

properly.

WARNING

Gasoline

Detergent

Do not spray or use

inﬂammable materials,

surfactants, or drinking water

in the vicinity of the Robot

Cleaner.

Doing so can cause ﬁre or

product failure.

* Inﬂammable materials:

gasoline, thinner, etc.

* Surfactant: detergent, articles

for bath, etc.

Turn the power supply off

immediately if any abnormal

sound, odor, or smoke is

generated from the Robot

Cleaner by removing it from the

home station and turning off

the main switch on the rear side

of the unit.

Failure to do so can cause ﬁre

or product failure.

5

ENGLISH

SAFETY PRECAUTIONS

CAUTION

Frequently empty the dust bin

and maintain its cleanliness.

The dust collected in the dust

bin can trigger allergies and

may contain harmful insects.

Use the Robot Cleaner indoors

only.

Using it outdoors can cause

product failure and irreparable

damage to the unit.

Close the cover of the dust bin

on the main unit before starting

cleaning.

If the cover is not closed, it

can cause injury or product

damage.

DO NOT use the Robot Cleaner

around a banister, staircase or

any other dangerous place.

Otherwise, the user or the

product can be exposed to

damage.

In rare cases, the Robot

Cleaner’s brush can damage

the carpet. If this happens,

immediately stop the cleaning

operation.

When a carpet has long tassels,

the tassels can be damaged.

Do not let the main unit and

charging terminal of the home

station come into contact with

metallic objects.

Doing so can cause product

failure.

Do not put water, detergent, etc.

into the Robot Cleaner.

Doing so can cause product

failure. Do not put any water

or detergent on the Robot

Cleaner. If liquids get inside of

the Robot Cleaner, turn off the

power supply and contact an

LG Electronics sales agent or

customer care center.

Do not drop the Robot Cleaner

or subject it to strong impacts.

Doing so can cause injury or

product failure not covered by

the warranty.

Do not expose the Robot

Cleaner to cold temperatures

(less than -5 C) for a long

period of time.

Doing so can cause product

failure.

Remove any cables or string

from the ﬂoor before starting.

Cable or string can get tangled

in the wheels of Robot Cleaner

and cause product failure or

the cord of an appliance can be

disconnected.

Make sure the Robot Cleaner is

not put on a table or desk, with

the power ON.

It may result in injury of the user

or damage in the product.

Do not allow the Robot Cleaner

to sweep up liquids, blades,

thumb tacks, kindling, etc.

These items can cause product

failure.

Do not put sharp objects into

the opening of the Robot

Cleaner’s ultrasonic sensor.

Doing so can cause product

failure.

Do not use the Robot Cleaner

when the dust bin is completely

ﬁlled up.

Doing so can cause product

failure.

6

SAFETY PRECAUTIONS

Check the following items before use:

• Empty the dust bin after each operation or prior to it filling up.

• Remove any cables or long strings from the floor.

• Remove any moisture from the floor before cleaning.

• Close the cover of the dust bin before cleaning.

• Remove fragile or unnecessary objects from the room to be cleaned.

For example, remove expensive ceramics and valuables from the floor.

• Confirm whether the battery has sufficient power, and if it is low, recharge it.

• Close the doors of any room that you do not want the Robot Cleaner to enter.

During cleaning, the Robot Cleaner may enter another room and continue cleaning.

• Do not use this product in the room where a child is sleeping alone. The child can be

hurt or woken.

• Remove towels, foot towel or any other thin cloth from the floor as they can get caught

by the brush.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as

they may cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

Tip

CAUTION

If the ﬂoor is wet or has wet

spots, wipe them up before

using the Robot Cleaner. Do

not use the Robot Cleaner on a

wet surface.

Failure to do so can cause

product failure.

When attaching the mop, do

not block the bottom camera

sensor.

Blocking the bottom camera

sensor may not allow the

product to work smoothly.

When the robot cleaner is

operating, it may hit the chair

leg, desk leg, table leg or other

narrow pieces of furniture.

For quicker and better cleaning,

place the dining chairs on top

of the dining table.

Make sure the plate on the

ﬂoor is higher than 2 cm from

the ground before starting the

cleaning.

If the threshold is low, the Robot

Cleaner can go over it and

perhaps into an undesirable

location. Make sure that all the

doors of the rooms that are not

to be cleaned are closed.

If you do not use it to save

the energy, turn off the power

switch, and turn on the power

switch when you are cleaning or

recharging it.

7

ENGLISH

INCLUDED WITH PRODUCT

 Figures can be different from actual objects.

Dust bin ﬁlter (spare)

(option)

Cleaning Tool

Cleaning brush

(It’s on the dust bin cover)

Mop plate (option)

for cleaning

sensors

for cleaning

the ﬁlter

Ultra microﬁber mop

(2 pieces) (option)

Batteries for remote controller

(2 units of AAA size)

Quick guide Operation manual

Home station

Robot Cleaner

Remote controller

Side brush (2 pieces)

(option)

Carpet Master

(option)

www.lg.com

Quick Guide

Cleaning Robot

This guide brieﬂy describes how to use the Cleaning Robot.

For more detail, please refer to the user manual

Please read this manual carefully before installing and operating the product.

www.lg.com

Rychlý průvodce

Čistící robot

Tento průvodce obsahuje stručný popis používání čistícího robota

Podrobnější informace jsou uvedeny v návodu k obsluze

Te nto manuál je zapotřebí si pečlivě přečíst před jakoukoliv instalací a používáním výrobku.

www.lg.c om

Stručný návod

Čistiaci robot

V tomto návode je uvedený stručný popis spôsobu používania čistiaceho robota

Podrobnejšie informácie nájdete uvedené v Návode pre používateľa

Pred inštaláciou a použitím tohto výrobku si pozorne prečítajte tento návod.

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to

allow for safe operation of the product. After reading the operation

manual, please keep it in an easily accessible location.

www.lg.com

OWNER’S MANUAL

ČISTÍCÍ ROBOT

Před použitím přístroje si prosím pečlivě přečtěte část Základní

bezpečnostní opatření, aby tak byl zajištěn bezpečný provoz

výrobku. Po přečtení návodu k obsluze jej uschovejte na dobře

přístupném místě.

www.lg.com

NÁVOD PRE POUŽÍVATEĽA

ČISTIACI ROBOT

Pred použitím výrobku si pozorne prečítajte stránky s

bezpečnostnými pokynmi, aby sa zaistilo bezpečné používanie

tohto výrobku. Po prečítaní tohto návodu na obsluhu ho odložte

na ľahko prístupné miesto.

www.lg.com

8

PARTS DESCRIPTION - ROBOT CLEANER

 Figures can be different from actual objects.

Plan view

Front view

Rear view

Bottom view

Upper camera sensor

Dust bin cover

Display & function button

Dust bin cover button

Ultrasonic sensors

Obstacle detecting sensor window Detecting

sensors of home station & Receiving sensors

of remote controller

Power switch

Ventilation port

Cliff detection sensors

Side brush

Charging terminals

Brush

Wheel

Battery

Lower camera sensor

9

ENGLISH

PART DESCRIPTION – HOME STATION / DUST BIN

 Figures can be different from actual objects.

Home station

Dust bin

Remote controller holder

Charging terminal

Sponge ﬁlter

Dust bin handle

Cleaning brush

Dust bin cover

Suction port ﬂap

HEPA ﬁlter

Filter cover

Dust bin cover

opening button

Power cord ﬁxing hook

Power switch

10

BUTTON FUNCTIONS – ROBOT CLEANER

• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.

• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.

• Used to change the clean mode setting.

• If the machine is at the Home Station, ‘Spot Clean’ option is not available.

• The 'My Space' mode can only be selected by remote control (when the

Robot Cleaner is not on the home station).

• Used to return the Robot Cleaner back to the home station for charging.

• If cleaning is finished or the battery is low, the Robot Cleaner will return to

the Home Station by itself to recharge its battery.

• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or

deactivate the Lock function.

• If 'Lock' is ON, a voice announcement “Západka byla uzamčena.” will be

heard each time a button is pressed.

• Used to turn the power ON, start or stop cleaning.

• If the button is pressed whilst the unit is powered ON, it will start cleaning.

• If button is pressed during the cleaning, it will stop the cleaning.

• If the button is pressed for about 2 sec. whilst the power is ON, the power will

be OFF.

• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.

TURBO

MODE

HOME

BUTTON LOCK

On/Off

START/STOP

11

ENGLISH

BUTTON FUNCTIONS – REMOTE CONTROLLER

• Remote Controller does NOT provide a Power ON function.

• With the machine's power OFF, the Remote Controller will not work.

• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of

the Robot Cleaner.

• Only use the 'Mode', 'My Space' or 'Clock' button after stopping Robot Cleaner.

Tip

Start

Pressing this button will

start the cleaning. (p17)

Home

Used to recharge the Robot

Cleaner by making it return to the

Home Station. (p18)

Turbo

Used to activate or deactivate

'Turbo' mode. (p23)

Stop/OK

Pressing the button will stop

the Robot Cleaner, or conﬁrm a

cleaning schedule or time setting.

My Space

Used to put the Robot Cleaner

in 'My Space clean' mode. (p21)

Mute

Used to activate or deactivate

'Mute' mode. (p12)

Diagnosis

Used to run Smart Diagnosis.

Available only when Robot

Cleaner is recharging. (p28)

Mode

Changes the cleaning

mode. (p20)

Directional button

This button enables

Manual Operation and

selection of an area in 'My

Space cleaning' mode.

Repeat

This button allows activating

or deactivating 'Repeat

Cleaning' mode. (p23)

Clock

Used to set the current

time indicated on the

Robot Cleaner. (p24)

Schedule

Used to start cleaning at a

scheduled time.

Pressing the button for

3 sec. will cancel the

scheduled cleaning.

※

Schedule Setting/Cancel

options are available only

in 'Charge' mode. (p25)

12

DISPLAY STATUS INFORMATION

• Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if

the power is OFF.

• To cancel the reservation, please press the 'Schedule' button on the remote for 3

seconds while the Robot Cleaner is recharging.

Tip

Lock icon

Indicates whether 'Lock‘ is

activated or not.

Mute icon

This icon indicates

whether the Mute is

ON or OFF.

Battery icon

This icon indicates the

residual battery level,

it ﬂickers if the battery

needs recharging.

AM/PM icon

This indicates whether it's

a.m. or p.m. according to

the clock setting.

Turbo icon

This display is ON

if Turbo Mode is

activated.

Homing icon

This icon is displayed

if Robot Cleaner is in

'Homing' mode.

My Space cleaning

Displayed when the

Robot Cleaner runs

My Space clean.

Spot cleaning

This icon appears

when Robot cleaner

starts Spot cleaning.

Time display

This indicates the current

and scheduled time.

Repeat cleaning

Displayed if the

machine is in 'Repeat

Cleaning' mode.

Zigzag cleaning

This icon is displayed to

indicate Robot Cleaner is

working in a Zigzag Clean.

Cell by Cell cleaning

This icon is displayed to indicate

Robot Cleaner is working in a

Cell by Cell cleaning mode.

Schedule icon

Indicates

the status of

Schedule/

'One time',

or 'Everyday'

setting.

13

ENGLISH

BEFORE YOU START

• Do not use this device in a room where a child is left alone. The child could be injured.

• Remove fragile or unnecessary objects from the room to be cleaned.

Especially, remove expensive ceramics and valuables from the floor.

• Close the cover of the dust bin before cleaning.

• Remove any moisture that might be on the floor.

• Remove cables, strips, towels, mats etc. from the floor so they will not get caught by the brush.

• Confirm whether the battery charge is sufficient, and if it is low, recharge it.

• Empty the dust bin before or after each clean, or before it becomes full.

• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning,

the Robot Cleaner may enter another room and continue cleaning.

• When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher.

If you are not planning to use the mop for cleaning, separate the mop before using Robot Cleaner.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may

cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

1. Open the battery cover by lifting the rear hook of the remote controller.

2. Insert two AAA batteries, checking for +, - nodes while loading.

3. Close the battery cover completely so that the batteries will not fall out.

• Only press one button at a time.

• Do not drop or subject it to forceful impact.

• Do not store it near devices that give off heat, fire or hot air.

• Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of

the remote control. Therefore, use it as far away as possible from such lamps.

• If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly.

Use the device within 3 m of the Robot Cleaner if possible.

Check these items before cleaning

Loading the remote controller battery

Precautions while using the remote control

–

+

–

+

–

+

–

14

OVERVIEW

1.5 

2 

1,5 

2 

1

Install the home station. (p15)

Insert the power cord plug into an outlet and locate the

station against a wall. If power is not supplied to the home

station, the Robot Cleaner will not charge.

2

Turn on the power supply of the Robot

Cleaner. (p16)

Turn ON the power switch on the rear-left of Robot

Cleaner, and press the 'Start/Stop' button on the top.

※

If the power supply is not turned on, refer to page

16.

3

Check the dust bin.

Check the cleanness of the dust bin before start cleaning

and close the cover of the dust bin on the main unit.

4

Start cleaning. (p17)

Press the START/STOP button once again while the Robot

Cleaner is turned on. You will hear the sound of cleaning

and cleaning will begin.

5

6

Automatic charge. (p18~19)

Use the cleaning mode and auxiliary functions.

(p20~26)

The Robot Cleaner will self-diagnose and automatically

return to the home station to recharge before the complete

discharge of the battery. It takes approximately three hours

to charge the battery.

Use the buttons on Robot cleaner and Remote Controller

to use each cleaning mode and supporting feature.

Cleaning modes include ZigZag, Cell by Cell, Spot, My

space, and Repeat cleaning; supporting features include

Manual, Scheduled and Microﬁber Mop cleaning.

< Warning > When Robot Cleaner is operated with the cover of the dust bin open,

it can cause an injury or serious damage to the product.

15

ENGLISH

HOW TO INSTALL THE HOME STATION

1. Position the home station against a wall on hard level ﬂooring to

prevent sliding during docking.

Remove objects within 1.5

m to the right and left side and within

2 m to the front.

2. Plug the power cord into an outlet.

Wrap the power cord around the ﬁxed hook on the back side of the

home station or along the wall surface so that the travel path of the

Robot Cleaner will not be obstructed.

3. Fix the home station against the wall so that it does not move.

Please turn on the power switch.

4. When the remote controller is not used, store it on the remote

controller holder on the home station.

1.5 

2 

1,5 

2 

Fixing hook of power cord

• Always keep the home station plugged in. If the home station is not plugged in, the

Robot Cleaner will not return to the station to charge automatically.

How to Install the Home Station

< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if it is

not working properly, or if it has been damaged or dropped. To avoid hazard, the cord must

be replaced by LG Electronics, Inc. or a qualified service person.

Tip

16

HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF

Make sure the Power Switch on the rear-left of the Robot Cleaner.

If the power is OFF, turn the switch ON.

※

When turning on the power switch, do not press the button

located at the upper section of the Robot Cleaner. Operation of

the button can be delayed.

※

Turn off the power switch if the Robot Cleaner will not be used

for a long period of time, in order to protect the battery. The

Robotic Cleaner cannot charge if the main switch is in the

"OFF" position.

With the power of Robot Cleaner OFF, press 'Start/Stop'

button for 1 second until a "Ting" sound is heard. In about 10

seconds, the power will be on and a melody will sound.

※

If 10 minutes elapse without the Robot Cleaner having being

given an active command after being turned on, the power

will automatically turn OFF.

Press the START/STOP button for two seconds while the

Robot Cleaner is turned on. A melody will sound when the

power is turned off.

• If the power cannot be turned on, do the following.

- Turn on the power switch and wait for more than 3 seconds.

- Press the ‘START/STOP’ button when the power switch is turned on.

- If the power is not turned on or if there is no display but only the “Ting” sound, put

the Robot Cleaner manually on to the home station.

Turning on the main power supply

Turning on from Stand By power.

Turning off the power supply

Tip

17

ENGLISH

HOW TO START AND STOP CLEANING

After the Robot Cleaner is turned on, press the START/STOP

button to begin cleaning. A melody will sound and cleaning will

begin.

Press the START/STOP button during the cleaning cycle to stop

cleaning.

※

When the ‘START/STOP’ button is pressed while the power

supply of the Robot Cleaner is turned off, the power will be

turned on. Press the ‘START/STOP’ button one more time to

start cleaning.

After the Robot Cleaner is turned on from the Robotic Cleaner,

press the START button on the remote control. A melody will

sound and cleaning will begin.

Press the Stop/OK button during the cleaning cycle to stop

cleaning.

※

The Robot Cleaner cannot be turned on from Stand By, by

using the remote controller when the power of the Robot

Cleaner is off. When the power is off, press the ‘START/STOP’

button on the upper side of Robot Cleaner to turn the power on

and to allow the remote to be used.

※

During cleaning, collisions can happen when the sensor cannot detect objects because of their

shape (Thin chairs and table legs, furniture corner). When this happens, the internal impact

detecting sensor will react by using a backward motion.

※

If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot

Cleaner on a ﬂat ﬂoor in order to prevent a malfunction of the obstacle detecting sensor. In addition,

start cleaning from a location where there are no obstacles such as curtains or walls within 30 cm of

the Robot Cleaner.

For best results:

• Briefly scan the area to be cleaned for big and small objects that will cause difficulty for

the Robot Cleaner.

• If cleaning is started when the Robot Cleaner is at the home station, the device

can rapidly be returned to the home station as the current home position has been

accurately read.

• When the mop plate is installed, to prevent a 2

nd

contamination from the contaminated

mop, it will not go over door sills of 5 mm or higher.

Using the buttons on the Robot Cleaner

Using the remote controller

Tip

18

HOW TO CHARGE THE BATTERY

The Robot Cleaner returns to the home station at the end of a cleaning

cycle or when its battery is running low.

※

If 10 minutes elapse without the Robot Cleaner moving or the battery

is too low, the power will automatically be turned OFF.

※

Do NOT turn OFF the Main Power Switch as the battery will not be

recharged. If the machine is returned manually with the Main Power

Switch OFF, it shows an error message, "Hlavní vypínač na zadní straně

HomBot je vypnutý. Prosím, zapněte vypínač."

※

In the event that the unit returns to the Home Station due to a low

battery during the cleaning, cleaning will be started, after the charging,

from the nearest place of the area which has not been cleaned before. (Page 19)

※

If Robot Cleaner is unable to dock to the home station on its ﬁrst attempt, it will try again until it docks successfully.

※

When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the

battery level is not low.

Method 1. Attach the Robot Cleaner to the home station

by aligning to the front side of the home station.

A melody sound will be generated along with an

audio message to start charging.

※

If a voice message, "Hlavní vypínač na zadní

straně HomBot je vypnutý. Prosím, zapněte

vypínač." is announced repeatedly, then turn

on the Main Power Switch.

Method 2. When the 'HOME' button of the remote control

or the Robot Cleaner is pressed, charging will

be prompted by automatically generating a

searching signal and returning the Robot Cleaner

to the home station.

※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is

manually charged by pressing the Home button, it may take slightly longer to ﬁnd the home station.

※

If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power supply is

turned on, it will automatically be returned to the home station and charging will begin.

Automatic charging

Manual charging

Take the following precautions when using the home station:

• If foreign material is caught in the charging terminal, charging may not proceed smoothly. Wipe the

terminal from time to time with a dry cloth after the power plug is disconnected.(p33)

• To prevent electric shock or damage to the home station, do not touch the charging terminal with

any metallic objects.

• To avoid fire or electric shock, never disassemble or modify the home station.

• Do not to place the home station or power plug near a heating source.

Tip

If using the Robot Cleaner for the ﬁrst time or when charging the battery during cleaning, you can manually charge

the battery.

Stránka sa načítava ...

LG VR64701LVMP Návod na obsluhu

LG VR64701LVMP Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty