ESAB AristoMig 450 Aristo<sup>®</sup>Mig U320 Používateľská príručka
- Kategória
- Zvárací systém
- Typ
- Používateľská príručka
Tento návod je vhodný aj pre
Valid for serial no. 310--xxx--xxxx, 445--xxx--xxxx0459 358 027 041216
AristoMig 320
AristoMig U320
AristoMig 450
AristoMig U450
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 16..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
2.1 Îáîðóäîâàíèå 6...........................................................
2.2 Íàñòðîéêè 6...............................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
4ÓÑÒÀÍÎÂÊÀ 8.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 8..................................................
4.2 Ðàçìåùåíèå 8.............................................................
4.3 Óñòàíîâêà 8................................................................
4.4 Ñåòü ýëåêòðîïèòàíèÿ 9.....................................................
4.5 Ìîíòàæ ýëåêòðîîáîðóäîâàíèÿ 10............................................
4.6 Íàãðóçî÷íîå ñîïðîòèâëåíèå 11..............................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 11...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 12.....................................
5.2 Ïîäêëþ÷åíèå íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè 13.......................
5.3 Çàùèòà îò ïåðåãðåâà 13.....................................................
5.4 Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû 13............................
5.5 Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ 13.........................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 13.................................
6.1 Çàïðàâêà îõëàæäàþùåé æèäêîñòè 14........................................
6.2 Ïðîâåðêà è î÷èñòêà 14......................................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 15.................................
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 15.......................................
ÑÕÅÌÀ 28..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 30.....................................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 31...........................
bu18d1r -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
RU
bu18d1r -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
∅ÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀ
ÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
2 ÂÂÅÄÅÍÈÅ
Èñòî÷íèêè ïèòàíèÿ AristoMig 320 è AristoMig 450 ïðåäíàçíà÷åíû ä ëÿ ðó÷íîé
äóãîâîé ñâàðêè ìåòàëëè÷åñêèì ýëåêòðîäîì MMA (ñâàðêè ïîêðûòûì
ýëåêòðîäîì), ñâàðêè MIG/MAG (ìåòàëëè÷åñêèì ïëàâÿùèìñÿ ýëåêòðîäîì â
ñðåäå èíåðòíîãî/àêòèâíîãî ãàçà), äóãîâîé ñâàðêè âîëüôðàìîâûì ýëåêòðîäîì
â ñðåäå èíåðòíîãî ãàçà TIG è ñòðîæêè óãîëüíîé äóãîé.
Èñòî÷íèê ïèòàíèÿ AristoMig èñïîëüçóåòñÿ âìåñòå ñ áëîêîì óïðàâëåíèÿ
AristoPendant U8 è/èëè áëîêîì ïîäà÷è ïðîâîëîêè AristoFeed 30-4 èëè
AristoFeed 48-4.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 31.
RU
bu18d1r -- 6 --
2.1 Îáîðóäîâàíèå
Èñòî÷íèê ïèòàíèÿ AristoMig ïîñòàâëÿåòñÿ âìåñòå ñ íàãðóçî÷íûì
ñîïðîòèâëåíèåì, ñåòåâûì øíóðîì, íàïðàâëÿþùèì ïà ëüöåì, ñòåëëàæîì äëÿ
ãàçîâîãî áàëëîíà, îáðàòíûì êàáåëåì è èíñòðóêöèåé ïî ýêñïëóàòàöèè.
2.2 Íàñòðîéêè
Âñå íàñòðîéêè âûïîëíÿþòñÿ ïðè ïîìîùè áëîêà óïðàâëåíèÿ
AristoPendant U8 èëè áëîêà ïîäà÷è ïðîâîëîêè ñ
êîíòðîëëåðîì MMC.
Ïîðÿäîê ðàáîòû - ñìîòðèòå ñïåöèàëüíûå èíñòðóêöèè ïî
ýêñïëóàòàöèè.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
AristoMig 320/320w/U320w AristoMig 320/320w/U320w
Íàïðÿæåíèå ñåòè 400 Â 3~50/60 Ãö 230/400/500 Â 3~50 Ãö
208/230/460/475 Â 3~60 Ãö
Ìàêñèìàëüíàÿ äîïóñòèìàÿ
íàãðóçêà ïðè
ðàáî÷åì öèêëå 100%
ðàáî÷åì öèêëå 60%
270A/30,8Â
320 A / 32,8 Â
270A/30,8Â
320 A / 32,8 Â
Äèàïàçîí íàñòðîåê
Ñâàðêà MIG/MAG
15 A / 15 Â (8 Â) - 320 A / 30
Â
30 A / 15 Â (8 Â) - 320 A / 30
Â
Ñâàðêà MMA 16 A / 20 Â - 320 Â / 32,8 Â 10 A / 20 Â - 320 A /32,8 Â
Ñâàðêà TIG 4 A / 10 Â - 320 A / 22,7 Â 10 A / 10 Â - 320 A / 22,7 Â
Íàïðÿæåíèå â ðåæèìå
õîëîñòîãî õîäà
Ñâàðêà MIG/MAG
65 - 80 Â 65 - 80 Â
Ñâàðêà MMA 50 - 60 Â 50 - 60 Â
Ñâàðêà TIG 50 - 60 Â 50 - 60 Â
Íàïðÿæåíèå õîëîñòîãî õîäà
ñ îõëàæäàþùåé âîäîé
140 Âò
310 Âò
140 Âò
310 Âò
Êïä ïðè ìàêñèìàëüíîì òîêå
Ñâàðêà MIG/MAG
Ñâàðêà MMA
Ñâàðêà TIG
82%
84,5%
82%
82%
84,5%
84,5%
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
Ñâàðêà MIG/MAG
Ñâàðêà MMA
Ñâàðêà TIG
0,85
0,85
0,80
0,85
0,85
0,80
Ê ëàññ çàùèòû êîðïóñà IP 23 IP 23
Ìàññà
ñ á ëîêîì îõëàæäåíèÿ
96 êã
110 ê ã
143 êã
157 êã
Ðàçìåðû, äxøxâ 910 x 642 x 835 ìì 910 x 642 x 835 ìì
Êëàññ ïðèìåíåíèÿ
RU
bu18d1r -- 7 --
AristoMig 450/450w/U450w AristoMig 450/450w/U450w
Íàïðÿæåíèå ñåòè 400 Â 3~50/60 Ãö 230/400/500 Â 3~50 Ãö
208/230/460/475 Â 3~60 Ãö
Ìàêñèìàëüíàÿ äîïóñòèìàÿ
íàãðóçêà ïðè
ðàáî÷åì öèêëå 100%
360 À / 34,4 Â 360 À / 34,4 Â
ðàáî÷åì öèêëå 60% 425 A / 37  425 A / 37 Â
ðàáî÷åì öèêëå 45% 450 A / 38  450 A / 38 Â
Äèàïàçîí íàñòðîåê
Ñâàðêà MIG/MAG
15 A / 15 Â (8 Â) - 450 A / 36,5 Â 30 A / 15 Â (8 Â) - 450 A /
36,5 Â
Ñâàðêà MMA 16 A / 20 Â - 450 A / 38 Â 10 A / 20 Â - 450 A / 38 Â
Ñâàðêà TIG 4 A / 10 Â - 450 A / 28 Â 10 A / 10 Â - 450 A / 28 Â
Íàïðÿæåíèå õîëîñòîãî õîäà
Ñâàðêà MIG/MAG
65 - 80 Â 65 - 80 Â
Ñâàðêà MMA 50 - 60 Â 50 - 60 Â
Ñâàðêà TIG 50 - 60 Â 50 - 60 Â
Íàïðÿæåíèå õîëîñòîãî õîäà
ñ á ëîêîì îõëàæäåíèÿ
180-210Âò
380 - 470 Âò
180-210Âò
380 - 470 Âò
Êïä ïðè ìàêñèìàëüíîì òîêå
Ñâàðêà MIG/MAG
Ñâàðêà MMA
Ñâàðêà TIG
82%
83%
83%
82%
83%
83%
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
Ñâàðêà MIG/MAG
Ñâàðêà MMA
Ñâàðêà TIG
0,92
0,92
0,90
0,92
0,92
0,90
Ê ëàññ çàùèòû êîðïóñà IP 23 IP 23
Ìàññà
ñ á ëîêîì îõëàæäåíèÿ
96 êã
110 ê ã
143 êã
157 êã
Ðàçìåðû,äxøxâ 910 x 642 x 835 ìì 910 x 642 x 835 ìì
Êëàññ ïðèìåíåíèÿ
Ìàêñèìàëüíîå êîëè÷åñòâî ñâàðî÷íûõ ïèñòîëåòîâ / ãîðåëîê ñ âîäÿíûì îõëàæäåíèåì, êîòîðîå
ìîæåò áûòü ïîäñîåäèíåíî: äâà ñâàðî÷íûõ ïèñòîëåòà MIG (äóãîâàÿ ñâàðêà ïëàâÿùèìñÿ
ìåòà ëëè÷åñêèì ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà) èëè îäíà ñâàðî÷íàÿ ãîðåëêà TIG
(äóãîâàÿ ñâàðêà âîëüôðàìîâûì ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà) è îäèí ñâàðî÷íûé
ïèñòîëåò MIG
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
RU
bu18d1r -- 8 --
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
4.1 Èíñòðóêöèè ïî ïîäúåìó
Ïðè ïîäúåìå èñòî÷íèê ïèòàíèå êðåïèòñÿ ñ
ïîìîùüþ ñïåöèàëüíîé ïîäúåìíîé ñêîáû. Ðó÷êà
ïðåäíàçíà÷åíà òîëüêî äëÿ ïåðåìåùåíèÿ ïî
ïîâåðõíîñòè.
Èíñòðóêöèÿ ïî âûïîëíåíèþ
ïîäúåìíî-òðàíñïîðòíûõ ðàáîò
4.2 Ðàçìåùåíèå
ÎÑÒÎÐÎÆÍÎ -
ÎÏÀÑÍÎÑÒÜ ÎÏÐÎÊÈÄÛÂÀÍÈß!
Çàêðåïèòå îáîðóäîâàíèå - îñîáåííî åñëè îíî
óñòàíîâëåíî íà íåðîâíîé èëè íàêëîííîé ïîâåðõíîñòè.
ÂÍÈÌÀÍÈÅ! Ðàçìåñòèòå îáîðóäîâàíèå â íàäëåæàùåì ïîëîæåíèè è íå
äîïóñêàéòå ïåðåêðûòèÿ èñòî÷íèêà ïèòàíèÿ èëè òàêîãî ïîëîæåíèÿ, â êîòîðîì
áëîê îõëàæäåíèÿ ïåðåãîðîæåí.
4.3 Óñòàíîâêà
RU
bu18d1r -- 9 --
4.4 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèòåñü â òîì, ÷òî èñòî÷íèê ñâàðî÷íîãî òîêà
ïîäê ëþ÷åí ê ñåòè ýëåêòðîïèòàíèÿ ñ òðåáóåìûì
íàïðÿæåíèåì è çàùèùåí ïðåäîõðàíèòåëÿìè
òðåáóåìîãî íîìèíàëà.
Íåîáõîäèìî îáåñïå÷èòü çàùèòíîå çàçåìëåíèå
â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè
ýëåêòðîïèòàíèÿ.
Ðåêîìåíäóåìûå íîìèíàëû ïðåäîõðàíèòåëåé è ìèíèìàëüíàÿ ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé
AristoMig 320 3~50 Ãö 3~50 Ãö 3~50 Ãö 3~60 Ãö 3~60 Ãö 3~60 Ãö 3~60 Ãö
Íàïðÿæåíèå ñåòè, Â 230 400 500 208 230 460 475
Òîê, A, 100%
60%
27
37
16
21
13
15
30
38
27
34.5
13.5
17
13
16.5
Ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ
ñåòåâîãî êàáåëÿ
4G10 4G4 4G4 4G10 4G10 4G4 4G4
Óñòîé÷èâîñòü
ïðåäîõðàíèòåëÿ ê
ïåðåíàïðÿæåíèÿì
25 16 16 35 25 16 16
AristoMig 450 3~50 Ãö 3~50 Ãö 3~50 Ãö 3~60 Ãö 3~60 Ãö 3~60 Ãö 3~60 Ãö
Íàïðÿæåíèå ñåòè, Â
230 400 500 208 230 460 475
Òîê, A, 100% 40 24,5 18,5 45 41 20 19,5
60% 51 30,5 23 57,5 51,5 25 24,5
45% 55,5 34 25 62 56,5 27,5 26,5
Ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ
ñåòåâîãî êàáåëÿ
4G10 4G4 4G4 4G10 4G10 4G4 4G4
Óñòîé÷èâîñòü
ïðåäîõðàíèòåëÿ ê
ïåðåíàïðÿæåíèÿì, A
50 20 20 50 50 20 20
Âíèìàíèå! Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâûõ êàáåëåé
è íîìèíàëû ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò øâåäñêèì íîðìàì. Ýêñïëóàòàöèÿ èñòî÷íèêà
ñâàðî÷íîãî òîêà äîëæíà îñóùåñòâëÿòüñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íàöèîíàëüíûìè
íîðìàòèâíûìè äîêóìåíòàìè.
RU
bu18d1r -- 1 0 --
4.5 Ìîíòàæ ýëåêòðîîáîðóäîâàíèÿ
RU
bu18d1r -- 1 1 --
4.6 Íàãðóçî÷íîå ñîïðîòèâëåíèå
Äëÿ èñêëþ÷åíèÿ ïîìåõ ñâÿçè êîíöû øèíû öåïè óïðàâëåíèÿ äîëæíû áûòü
ñíàáæåíû íàãðóçî÷íûìè ñîïðîòèâëåíèÿìè.
Îäèí êîíåö øèíû öåïè óïðàâëåíèÿ íàõîäèòñÿ íà áëîêå óïðàâëåíèÿ áëîêà
ïîäà÷è ïðîâîëîêè MMC, â íåì óñòàíîâëåíî âñòðîåííîå íàãðóçî÷íîå
ñîïðîòèâëåíèå. Íà äðóãîé êîíåö øèíû öåïè óïðàâëåíèÿ ñëåäóåò óñòàíîâèòü
íàãðóçî÷íîå ñîïðîòèâëåíèå, êàê ïîêàçàíî íà ðèñóíêå.
 çàâèñèìîñòè îò òèïà ñîåäèíåíèÿ ñîïðîòèâëåíèå íåîáõîäèìî ïîäñîåäèíÿòü
ñëåäóþùèì îáðàçîì:
1. Ïàíåëü óïðàâëåíèÿ, ïîäñîåäèíåííàÿ ê áëîêó ïîäà÷è ïðîâîëîêè.
Íàãðóçî÷íîå ñîïðîòèâëåíèå ïîäñîåäèíÿåòñÿ â
çàäíåé ÷àñòè èñòî÷íèêà ïèòàíèÿ.
(Ïîäñîåäèíåí òàêèì îáðàçîì ïðè ïîñòàâêå ñ
çàâîäà-èçãîòîâèòåëÿ).
2. Áëîê óïðàâëåíèÿ ïîäñîåäèíåí ê èñòî÷íèêó ïèòàíèÿ.
Íàãðóçî÷íîå ñîïðîòèâëåíèå
ïîäñîåäèíåí â ïåðåäíåé ÷àñòè
áëîêà ïîäà÷è ïðîâîëîêè.
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
Âíèìàíèå!
Óáåäèòåñü â òîì, ÷òî ñîåäèíèòåëüíûé êàáåëü (ìàêñ. 8 ì) ìåæäó èñòî÷íèêîì
ïèòàíèÿ è áëîêîì ïîäà÷è ïðîâîëîêè è îáðàòíûé êàáåëü (ìàêñ. 8 ì) íå ñêðó÷åí
â âèòêè âî âðåìÿ ïîäà÷è èìïóëüñîâ.
RU
bu18d1r -- 1 2 --
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
MMA, MIG/MAG
Öåíòðàëüí
î
åï
î
äñ
î
åäèíåíèå äëÿ ñâàð
ê
è TIG
TIG, OKC-ñîåäèíåíèå
1 Çàëèâíîå îòâåðñòèå äëÿ îõëàæäàþùåé
âîäû
11 OKC-ñîåäèíåíèå ñâàðî÷íîé ãîðåëêè TIG
2 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
12 Ïîäñîåäèíåíèå ãàçà ê ñâàðî÷íîé ãîðåëêå
TIG
3 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ
13 Ñîåäèíèòåëü äëÿ ïîäà÷è ñèãíàëà ïóñêà îò
ñâàðî÷íîé ãîðåëêè TIG
4 Ïåðåêëþ÷àòåëü íàïðÿæåíèÿ ñåòè 1 / 0 14 Ñîåäèíèòåëüíûé ðàçúåì ãàçîâîãî øëàíãà
5 Âûêëþ÷àòåëü óñòðîéñòâà îõëàæäåíèÿ
(AristoMig 320w è AristoMig 450w)
15 Ñîåäèíèòåëü äëÿ (+) êàáåëÿ ñâàðî÷íîãî
òîêà ê áëîêó ïîäà÷è ïðîâîëîêè.
6 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû îò ñâàðî÷íîé
ãîðåëêè TIG - ÊÐÀÑÍÛÉ
16 Ñîåäèíåíèå MBC (ìèíèàòþðíîãî
âûêëþ÷àòåëÿ) íà 42  ñ áëîêîì ïîäà÷è
ïðîâîëîêè.
7 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû îò ñâàðî÷íîé
ãîðåëêè TIG - Ã Î ËÓÁÎÉ
17/18 Ñîåäèíèòåëü äëÿ áëîêà óïðàâëåíèÿ
AristoPendant U8, ê àáåëÿ óïðàâëåíèÿ,
èäóùåãî ê áëîêó ïîäà÷è ïðîâîëîêè,
íàãðóçî÷íîãî ñîïðîòèâëåíèÿ èëè
à äàïòåðà á ëîêà äèñòàíöèîííîãî
óïðàâëåíèÿ.
8 Öåíòðàëüíûé ñîåäèíèòåëü äëÿ
ñâàðî÷íîé ãîðåëêè TIG.
19 Ñîåäèíèòåëü äëÿ ïîäà÷è îõëàæäàþùåé
âîäû î ò áëîêà ïîäà÷è ïðîâîëîêè -
ÊÐÀÑÍÛÉ
9 Ñîåäèíèòåëü äëÿ (-) îáðàòíîãî êàáåëÿ
ïðèñâàðêåìåòîäàìèMMAèMIG/MAG
èëè äëÿ êàáåëÿ ñâàðî÷íîãî òîêà ïðè
ñâàðêå ìåòîäîì TIG.
20 Ïîäêëþ÷åíèå îõëàæäàþùåé âîäû ê áëîêó
ïîäà÷è ïðîâîëîêè - ÃÎ ËÓÁÎÉ
10 Ñîåäèíèòåëü (+) äëÿ ê àáåëÿ
ñâàðî÷íîãî òîêà ïðè ñâàðêå ìåòîäîì
MMA èëè äëÿ îáðàòíîãî êàáåëÿ ïðè
ñâàðêå ìåòîäîì TIG.
RU
bu18d1r -- 1 3 --
5.2 Ïîäêëþ÷åíèå íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè
Ïðè ïîäêëþ÷åíèè íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè ñëåäóåò èñïîëüçîâàòü
áëîê ïîäà÷è ïðîâîëîêè AristoFeed 30-4 èëè AristoFeed 48-4 ñ ïàíåëüþ óïðàâëåíèÿ
(M0) è áëîê óïðàâëåíèÿ AristoPendant U8.
Ïîæà ëóéñòà, ñâÿæèòåñü ñ àòòåñòîâàííûì îáñëóæèâàþùèì ïåðñîíàëîì êîìïàíèè
ESAB ïðè ï îäñîåäèíåíèè íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè.
5.3 Çàù èòà îò ïåðåãðåâà
Èñòî÷íèê ïèòàíèÿ îõëàæäàåòñÿ âåíòèëÿòîðîì è îñíàùåí ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè, êîòîðûå ñðàáàòûâàþò ïðè ïðåâûøåíèè äîïóñòèìîé òåìïåðàòóðû,
ïðåäîòâðàùàÿ òàêèì îáðàçîì ïåðåãðåâ. Âîçâðàò ðåëå â èñõîäíîå ïîëîæåíèå
ïðîèñõîäèò àâòîìàòè÷åñêè ïðè îñòûâàíèè èñòî÷íèêà ïèòàíèÿ.
Ïðè ýòîì ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ è â ïåðåäíåé ÷àñòè èñòî÷íèêà
ïèòàíèÿ çàãîðàåòñÿ îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà.
5.4 Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû áëîêèðóåò èñòî÷íèê ïèòàíèÿ, åñëè
ïîòîê îõëàæäàþùåé âîäû îñòàíàâëèâàåòñÿ. Ïðè ýòîì ïîäà÷à ñâàðî÷íîãî òîêà
ïðåêðàùàåòñÿ è íà áëîêå óïðàâëåíèÿ îòîáðàæàåòñÿ àâàðèéíûé ñèãíàë.
Ýòî çàùèòíîå óñòðîéñòâî ïîñòàâëÿåòñÿ êàê äîïîëíèòåëüíàÿ ïðèíà äëåæíîñòü.
5.5 Áëîê äèñòàíöèîííîãî óïðàâëåíèÿ
Âåðñèÿ ïðîãðàììû â AristoPendant U8 äîëæíà áûòü 1.20 èëè âûøå. Äëÿ
íà äëåæàùåãî ôóíêöèîíèðîâàíèÿ äèñòàíöèîííîãî óïðàâëåíèÿ íà ìàøèíàõ
Aristo ñî âñòðîåííûìè ïàíåëÿìè óïðàâëåíèÿ äîëæíà áûòü óñòàíîâëåíà âåðñèÿ
ïðîãðàììíîãî îáåñïå÷åíèÿ 1.21 èëè âûøå.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ ïîäêëþ÷åí, èñòî÷íèê ïèòàíèÿ è áëîê
ïîäà÷è ïðîâîëîêè íàõîäÿòñÿ â ðåæèìå äèñòàíöèîííîãî óïðàâëåíèÿ; êíîïêè è
ðó÷êè áëîêèðóþòñÿ. Ðåãóëèðîâêó âñåõ ôóíêöèé ìîæíî âûïîëíèòü òîëüêî ïðè
ïîìîùè ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ íå èñïîëüçóåòñÿ, åãî âìåñòå ñ
à äàïòåðîì ñëåäóåò îòñîåäèíèòü îò èñòî÷íèêà ïèòàíèÿ è áëîêà ïîäà÷è
ïðîâîëîêè, êîòîðûå â ïðîòèâíîì ñëó÷àå áóäó ò ïðîäîëæàòü ðàáîòàòü â ðåæèìå
äèñòàíöèîííîãî óïðàâëåíèÿ.
Åñëè áëîê äèñòàíöèîííîãî óïðàâëåíèÿ ìîæåò óñòàíàâëèâàòü íàïðÿæåíèå, òî
ýòà ôóíêöèÿ èçìåíÿåòñÿ íà íàñòðîéêó ñâàðî÷íîãî òîêà ä ëÿ ñâàðêè MMA .
Ïîäðîáíûå ñâåäåíèÿ î ðàáîòå áëîêà äèñòàíöèîííîãî óïðàâëåíèÿ ïðèâåäåíû
â èíñòðóêöèÿõ ïî ýêñïëóàòàöèè áëîêà óïðàâëåíèÿ/MMC.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíìèéíú²å îáÿçàìåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
RU
bu18d1r -- 1 4 --
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
6.1 Çàïðàâêà îõëàæäàþùåé æèäêîñòè
Ðåêîìåíäóåòñÿ èñïîëüçîâàòü ñìåñü èç
50% âîäû è 50% ýòèëåíãëèê îëÿ.
6.2 Ïðîâåðêà è î÷èñòêà
Ðåãóëÿðíî ï ðîâåðÿéòå, ÷òîáû áëîê ïîäà÷è ï ðîâîëîêè íå áûë çàáèò ãðÿçüþ.
Ïåðèîäè÷íîñòü ïðîâåðêè è ïðèìåíÿåìûå ìåòîäû î÷èñòêè çàâèñÿò îò:
òåõíîëîãèè ñâàðêè, äëèòåëüíîñòè ãîðåíèÿ äóãè è óñëîâèé îêðóæàþùåé ñðåäû.
Îáû÷íî äîñòàòî÷íî îñóùåñòâëÿòü ïðîäóâêó èñòî÷íèêà ïèòàíèÿ ñòðóåé ñæàòîãî
âîçäóõà (ïîíèæåííîãî äàâëåíèÿ) îäèí ðàç â ãîä.
RU
bu18d1r -- 1 5 --
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêî ìåíäóåìûå íèæå ïð îâåðêè.
Òèï íåèñïðàâíîñòè Äåéñòâèÿ:
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ
êàáåëåé ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ
êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà
òîêà.
S Ïðîâåðüòå, íå îòêëþ÷åí ëè ìèíèàòþðíûé
âûêëþ÷àòåëü.
 ïðîöåññå ñâàðêè ïðîïàë ñâàðî÷íûé
òîê.
S Ïðîâåðüòå, íå ñðàáîòàëè ëè ðåëå çàùèòû îò
òåïëîâîé ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå
îïðåäåëÿåòñÿ ïî çàãîðàíèþ îðàíæåâîé
ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
×àñòîå ñðàáàòûâàíèå ðåëå çàùèòû îò
òåïëîâîé ïåðåãðóçêè.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû
íîìèíàëüíûå çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà
ïèòàíèÿ (ò. å. ÷òî óñòðîéñòâî ðàá îòàåò áåç
ïåðåãðóçêè).
Íèçêàÿ ýôôåêò èâíîñòü ñâàðêè. S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ
êàáåëåé ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ
êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà
òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóþòñÿ ýëåêòðîäû
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 6 --
TOCe
1 DIRECTIVE 17........................................................
2SAFETY 17...........................................................
3 INTRODUCTION 19...................................................
3.1 Equipment 19................................................................
3.2 Settings 19..................................................................
4 TECHNICAL DATA 19.................................................
5 INSTALLATION 20....................................................
5.1 Lifting instructions 21.........................................................
5.2 Placing 21...................................................................
5.3 Installation 21................................................................
5.4 Mains power supply 22........................................................
5.5 Electrical installation 23.......................................................
5.6 Terminating resistor 24........................................................
6 OPERATION 25.......................................................
6.1 Connections and control devices 25............................................
6.2 Connection of several wire feed units 26.........................................
6.3 Overheating protection 26.....................................................
6.4 Water flow guard 26..........................................................
6.5 Remote control unit 26........................................................
7 MAINTENANCE 26....................................................
7.1 Filling the coolant 27..........................................................
7.2 Inspection and cleaning 27....................................................
8 FAULT TRACING 27...................................................
9 ORDERING SPARE PARTS 27..........................................
DIAGRAM 28............................................................
ORDERING NUMBER 30.................................................
ACCESSORIES 31.......................................................
-- 1 7 --
bu18d1e
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guarantee that welding
power source AristoMig 320 / 450 from serial number 310 complies with standard IEC/EN 60974--1, in
accordance with the requirements of directive (73/23/EEC) and addendum (93/68/EEC) and with
standard EN 50199 in accordance with the requirements of directive (89/336/EEC) and addendum
(93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Henry Selenius
Vice President
ESAB Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
Laxå 2003--06--12
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 8 --
bu18d1e
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
GB
-- 1 9 --
bu18d1e
3 INTRODUCTION
The AristoMig 320 and AristoMig 450 power sources are intended for MMA (welding
with coated electrodes), MIG/MAG welding, TIG welding and carbon--arc gouging.
AristoMig is used in combination with the AristoPendant U8 control unit and/or the
AristoFeed 30--4 or AristoFeed 48--4 wire feed unit.
ESAB’s accessories for the product can be found on page 31.
3.1 Equipment
AristoMig is supplied with terminating resistor, mains cable, guide pin, gas cylinder shelf,
return cable and instruction manual.
3.2 Settings
All settings are m ade using the control unit
AristoPendant U8 or wire feed unit with MMC.
Operation -- see separate instruction manuals.
4 TECHNICAL DATA
AristoMig 320/320w/U320w AristoMig 320/320w/U320w
Mains voltage 400V 3~50/60 Hz 230/400/500V 3~50Hz
208/230/460/475V 3~60 Hz
Maximum permissible load at
100% duty cycle
60% duty cycle
270A / 30.8V
320A / 32.8V
270A / 30.8V
320A / 32.8V
Setting range
MIG/MAG
15A/ 15V(8V)--320A/30V 30A/15V(8V)--320A/30V
MMA 16A / 20V -- 320A/32.8V 10A / 20V -- 320A /32.8V
TIG 4A / 10V -- 320A/22.7V 10A / 10V -- 320A / 22.7V
Open --circuit voltage
MIG/MAG
65 -- 80 V 65 -- 80 V
MMA 50 --60 V 50 --60 V
TIG 50 --60 V 50 --60 V
Open --circuit output
with water
180 -- 210 W
380 -- 470 W
180 -- 210 W
380 -- 470 W
Efficiency at maximum current
MIG/MAG
MMA
TIG
82%
84.5%
82%
82%
84.5%
84.5%
Power factor at maximum current
MIG/MAG
MMA
TIG
0.85
0.85
0.80
0.85
0.85
0.80
Enclosure class IP 23 IP 23
Weight
with cooling unit
96 kg
110 kg
143 kg
157 kg
Dimensions,lxwxh 910 x 642 x 835 mm 910 x 642 x 835 mm
Application class
GB
-- 2 0 --
bu18d1e
AristoMig 450/450w/U450w AristoMig 450/450w/U450w
Mains voltage 400V 3~50/60 Hz 230/400/500V 3~50Hz
208/230/460/475V 3~60 Hz
Maximum permissible load at
100% duty cycle
360A / 34.4V 360A / 34.4V
60% duty cycle 425A / 37V 425A / 37V
45% duty cycle 450A / 38V 450A / 38V
Setting range
MIG/MAG
15A/ 15V (8V)--450A/ 36.5V 30A/ 15V (8V)--450A/ 36.5V
MMA 16A / 20V -- 450A / 38V 10A / 20V -- 450A / 38V
TIG 4A / 10V -- 450A / 28V 10A / 10V -- 450A / 28V
Open --circuit voltage
MIG/MAG
65 -- 80 V 65 -- 80 V
MMA 50 --60 V 50 --60 V
TIG 50 --60 V 50 --60 V
Open --circuit output
with cooling unit
180 -- 210 W
380 -- 470 W
180 -- 210 W
380 -- 470 W
Efficiency at maximum current
MIG/MAG
MMA
TIG
82%
83%
83%
82%
83%
83%
Power factor at maximum current
MIG/MAG
MMA
TIG
0.92
0.92
0.90
0.92
0.92
0.90
Enclosure class IP 23 IP 23
Weight
with cooling unit
96 kg
110 kg
143 kg
157 kg
Dimensions,lxwxh 910 x 642 x 835 mm 910 x 642 x 835 mm
Application class
Maximum number of water--cooled welding guns/torches that may be connected: two MIG welding
guns or one TIG torch and one MIG welding gun
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
5 I NSTALLATION
The installatio n must be executed b y a p rofession al.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
GB
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
Stránka sa načítava...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
ESAB AristoMig 450 Aristo<sup>®</sup>Mig U320 Používateľská príručka
- Kategória
- Zvárací systém
- Typ
- Používateľská príručka
- Tento návod je vhodný aj pre
v iných jazykoch
Súvisiace články
Ostatné dokumenty
-
3M SPEEDGLAS SL Používateľská príručka
-
RAVAK RC1-L2 Assembly Manual, Putting Device To Operation And Operating Instructions
-
Prology iREG-7000 SHD Používateľská príručka
-
Saibex 3D640 Používateľská príručka
-
Dell XPS 10 Užívateľská príručka
-
Roland AC-33 Návod na obsluhu
-
HP Jetdirect 500x Print Server for Token Ring Užívateľská príručka
