Crock-Pot CSC051X Návod na obsluhu

Značka: Crock-Pot

Model: CSC051X

Typ: Návod na obsluhu

Táto príručka je tiež vhodná pre

Instruction manual • Notice d’utilisation • Bedienungsanleitung •

Manual de instrucciones • Manual de instruções • Manuale di istruzioni

• Gebruiksaanwijzing • Bruksanvisning • Ohjeet • Betjeningsvejledning •

Instruksjonshåndbok • Instrukcja obsługi • Uživatelská příručka •

Návod na použitie • Használati utasítás • Manual de utilizare •

Ръководство за употреба • Priručnik za upotrebu • Εγχειριδιο χρησης

CSC051X

- Since 1970 -

Crock-Pot® Express

Multi-Cooker

English 4

Français/French 20

Deutsch/German 30

Español/Spanish 40

Português/Portuguese 50

Italiano/Italian 60

Nederlands/Dutch 70

Svenska/Swedish 80

Suomi/Finnish 90

Dansk/Danish 100

Norsk/Norwegian 110

Polski/Polish 120

Česky/Czech 130

Slovenčina/Slovakian 140

Magyar/Hungarian 150

Română/Romanian 160

български/Bulgarian 170

MANUAL

ENGLISH

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed to reduce the risk of fire, electric shock, and/or injury to persons

including the following:

1. Read all instructions before using this product.

2. This appliance shall not be used by children. Keep the appliance and it’s

cord out of reach of children. Children shall not play with the appliance.

Appliances can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved.

3. Do not operate any appliance with a damaged cord or plug or after the

appliance malfunctions, or has been damaged in any manner. Return

the appliance to the manufacturer (see warranty) for examination, repair

or adjustment. Do not attempt to replace or splice a damaged cord. If

the supply cord is damaged it must be replaced by a special cord or

assembly available from the manufacturer or its service agent.

4. Do not use outdoors or for commercial purposes.

5. Do not use appliance for other than intended use. Misuse can cause

injuries. This appliance is not intended for deep frying foods.

6. This appliance cooks under pressure when using pressure cooking

functions. Improper use may result in scalding injury. Make certain unit

is properly closed before operating. See Operating Instructions.

7. This appliance generates heat during use. Do not touch hot surfaces.

Use handles or knobs.

8. Do not fill the unit over maximum fill line at 2/3 full. When cooking foods

that expand during cooking such as rice or dried vegetables, do not fill

the unit beyond the recommended level at 1/2 full. Over filling may cause

a risk of clogging the vent pipe and developing excess pressure. Follow

all cooking and recipe instructions.

IMPORTANT SAFETY NOTICE:

When releasing pressure from the unit, ensure an oven glove is worn and

a kitchen utensil is used to gradually open the valve and release pressure.

Beware of escaping steam.

NEVER immerse the heating base, power cord or plug into water or any

other liquid.

9. Always check the pressure release devices for clogging before use.

Clean as necessary.

10. Place the Multi-Cooker so that the Steam Release Valve is positioned

away from the body.

11. Never place any part of the body, including face, hands, and arms over

the Steam Release Valve. Steam can result in serious burns.

12. Do not operate the Multi-Cooker without food or liquid in the Cooking

Pot.

13. To prevent risk of injury due to excessive pressure, replace Lid Sealing

Gasket only as recommended by the manufacturer. See Care and Cleaning

instructions.

14. Do not use the Lid to carry the Multi-Cooker.

15. Do not move or cover the Multi-Cooker while it is in operation.

16. After pressure cooking, do not open the pressure cooker until the unit

has cooled and all internal pressure has been released. If the Lid is

difficult to remove, this indicates that the cooker is still pressurized - do

not force it open. Any pressure in the cooker can be hazardous. See

Releasing Pressure Instructions.

17. Be careful when lifting and removing Lid after cooking. Always to using

oven glove tilt the Lid away from you as steam is hot and can result in

serious burns. Never place face over the Multi-Cooker.

18. Do not use this pressure cooker for pressure frying with oil.

19. To protect against electric shock, do not place or immerse power cord,

plugs or heating base in water or other liquid.

20. Do not use the Cooking Pot for food storage or place in the freezer.

21. To prevent damage to the Multi-Cooker do not use alkaline cleaning

agents when cleaning. Use a soft cloth and a mild detergent.

22. Always plug Power Cord fully into Multi-Cooker first, then plug cord into

the wall outlet.

23. Unplug from the outlet when not in use, Always unlug and allow to cool

before putting on or taking off parts and before cleaning. To disconnect,

ensure that the Multi-Cooker is OFF, then unplug Power Cord from

outlet. Do not disconnect by pulling on cord.

24. Do not let Power Cord hang over edge of table or counter or come into

contact with hot surfaces.

25. Extreme caution must be used when moving an appliance containing hot

liquids.

26. Never use any accessory or attachment not recommended by the

manufacturer.

27. Do not place on or near wet surfaces, or heat sources such as a hot gas

or electric burner, or in a heated oven.

28. CAUTION: To protect against electrical shock and product damage,

do not cook directly in the Heating Base. Cook only in the removable

Cooking Pot provided.

29. WARNING: Spilled food can cause serious burns. Never drape cord over

edge of counter, never use outlet below counter, and never use with an

extension cord.

30. Do not plug in or turn on the Multi-Cooker without having the Cooking

Pot inside the Multi-Cooker.

31. Intended for household countertop use only. Keep 6 inches (152 mm)

clear from the wall and on all sides. Always use appliance on a dry,

stable, level surface.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

FITTING A PLUG (UK & IRELAND ONLY)

This appliance must be earthed.

If the plug is not suitable for the socket outlets in your home, it can be removed and

replaced by a plug of the correct type.

If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The

appliance must not be used without the fuse cover fitted.

If the plug is unsuitable, it should be dismantled and removed from the supply cord and

an appropriate plug fitted as detailed. If you remove the plug it must not be connected

to a 13 amp socket and the plug must be disposed of immediately.

If the terminals in the plug are not marked or if you are unsure about the installation of

the plug please contact a qualified electrician.

A short Power Cord is used to reduce the risk resulting from it being grabbed by

children, becoming entangled in, or tripping over a longer cord.

NOTICES:

1. Some countertop and table surfaces are not designed to withstand the prolonged heat generated by certain

appliances. Do not set the heated Multi-Cooker on a finished wood table. We recommend placing a hot pad or trivet

under your Multi-Cooker to prevent possible damage to the surface.

2. During initial use of this appliance, some slight smoke and/or odor may be detected. This is normal with many heating

appliances and will not recur after a few uses.

3. Please use caution when placing your Cooking Pot on a ceramic or smooth glass cook top stove, countertop, table

or other surface. It may scratch some surfaces if caution is not used. Always place heat resistant protective padding

under the Cooking Pot before setting on a table, countertop or other surface.

Blue

(Neutral)

Brown

(Live)

Fuse

Green/Yellow

(Earth)

Plug should be ASTA approved to BS1363

Fuse should be ASTA approved to BS1362

Ensure that the outer sheath of

the cable is firmly held by the cord grip

CROCK-POT® EXPRESS MULTI-COOKER COMPONENTS

HOW TO USE YOUR CROCK-POT® EXPRESS MULTI-COOKER

GETTING STARTED:

Remove all packaging, paper, and cardboard (including any located between the Cooking Pot and Heating Base).

Read and save the literature and be sure to read the service and warranty information.

Visit the Crock-Pot® website at www.crockpot.co.uk for additional information, hints, tips and recipes or call 0800 052 3615.

ASSEMBLY:

• Place Cooking Pot into the Heating Base

• Place Lid upon Multi-Cooker and align with . To lock, twist counterclockwise, aligning with . To unlock,

twist Lid clockwise and align with .

GETTING TO KNOW YOUR CROCK-POT®

EXPRESS MULTI-COOKER

1. Remove the Lid by turning clockwise to unlock, aligning with . Remove the Sealing Gasket from the Lid and

wash the gasket and the Lid in warm soapy water. Dry the Sealing Gasket and Lid thoroughly before reattaching

the Sealing Gasket to the Lid. Ensure the Sealing Gasket is smoothly and securely in place in the gasket holder. If

the Sealing Gasket is not in the correct position the Lid will not be able to form a seal and will not be able to gain

pressure.

Locked Lid Unlocked Lid Open Lid

Figure 1

APower Cord

BLid Lock Pin

CLid Handle

DLid

ECooking Pot

FHeating Base

GControl Panel

HBobber Valve

ISteam Release Valve

JCondensation Collector

KPower Cord Port

CONTROL PANEL

LDisplay Screen

MTime Selection Buttons

UNDERSIDE OF LID

NGasket Fixing Ring

OSteam Release Valve Cover

PSealing Gasket

QBobber Valve

RPlastic Spoon

SSteaming Rack

2. Remove the Cooking Pot and the Condensation Collector and wash in warm, soapy water. Dry thoroughly before

replacing back in the Multi-Cooker.

The Crock-Pot® Express Multi-Cooker has been designed with safety in mind and has various safety measures.

1. Pressure will not build if the Lid is not shut correctly and has not sealed.

2. Ensure Lid is in the completely locked position and the is aligned with .

3. Pressure will not build if the Steam Release Valve has not been switched to the Seal “ ” position.

4. Over filling may cause a risk of clogging the vent pipe and developing excess pressure.

5. The gasket and the valves can be removed for cleaning. (See page 15).

6. Once the pressure increases, the Lid cannot be opened. Safety sensors ensure the pressure remains within the set

range.

7. The Steam Release Valve has an extended finger tab, designed to keep the hand away from the top of the valve.

Always use a kitchen utensil when operating this tab. See RELEASING PRESSURE Instructions on page 11.

8. The pressure cooking functions require liquid to work. If the inside of the Cooking Pot does not have enough liquid, an

error will appear in the Display Screen. See ERROR CODES chart on page 17.

9. At the end of cooking, the Lid cannot be unlocked until all the pressure is released. This can be done using the

Natural Pressure Release Method or Quick Pressure Release Method, explained on page 11.

10. The Time Selection Buttons (+ and -) are used to set the cooking time. To advance slowly, simply press the + or -

button and release. To advance quickly, press and hold the + or - button. If you have passed the desired time, simply

press the opposite arrow button to return to the desired time.

NOTE: The timer can be selected for all programs and can be changed at any time during cooking by pressing START/

STOP and selecting a new function.

11. The PRESSURE ADJUST button is used to select desired cooking pressure (HIGH or LOW). Each pre-set cooking

setting automatically selects the optimum pressure for that selection, but it can be manually selected with this button

(see the Cooking Guide on page 182 for available adjustments).

12. The TEMP ADJUST button is used to select desired temperature (HIGH or LOW). The temperature may only be

adjusted on the SLOW COOK, YOGURT, and BROWN/SAUTÉ functions (see the Cooking Guide on page 182 for

available adjustments).

13. The START/STOP button starts and stops a cooking function. It must be pressed to change from one cooking function

to another after cooking has begun.

14. The Display Screen shows how much longer the food needs to cook from the selected time in hours and minutes

once the Multi-Cooker is preheated. While the Multi-Cooker is preheating, the display screen will show, “HEAt”.

GETTING STARTED

(NOTE: The Multi-Cooker beeps as each button is pressed.)

1. Add desired ingredients to Cooking Pot. Place Lid on top of Multi-Cooker and align with . To lock, twist

counterclockwise, aligning with .

2. Plug provided Power Cord into the Power Cord Port of the Multi-Cooker.

3. Plug other end of the Power Cord into a wall power outlet.

4. Select the cooking function you would like to use.

5. The START/STOP button and the time on the screen will flash.

6. Select the desired cook time by using the + and - buttons. Select the desired temperature using the TEMP ADJUST

button (if applicable).Select the desired pressure using the PRESSURE ADJUST button. (Please refer to the Cooking

Guide chart on page 182 for time and temperature recommendations.)

7. Press the START/STOP button. For pressure cooking functions, the word “HEAt” will appear on the Display Screen

during preheating time. Once the Multi-Cooker is preheated, the selected cooking time will appear on Display Screen.

Note: For Pressure Cooking functions, the average pre-heat time can vary depending on the volume and temperature

of the food being cooked. This can range from 5-30 minutes.

8. This Multi-Cooker allows you to delay the start of your cooking so that cooking finishes when you need it. See page 9

for instructions on the DELAY TIMER function.

9. After the set cooking time has elapsed, the Multi-Cooker will beep again and will automatically switch to the KEEP

WARM setting. The Display Screen will then change from the cook time to a new timer that will count up to 4:00 (4 hours)

or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

10. To end a cooking function at any time, press the START/STOP button.

11. When finished, unplug the Multi-Cooker and wait for it to cool completely before attempting to clean.

CAUTION: The Cooking Pot and Heating Base will get very hot while using this Multi-Cooker. Do not touch hot

surfaces. Always use pot holders or oven-mitts when using this Multi-Cooker. Always lift the Lid by tilting away from

you to avoid the steam.

HOW TO USE THE TIME DELAY

This Multi-Cooker allows you to delay the start of your cooking so that cooking finishes when you need it.

Note: The DELAY TIMER function is not available on the BROWN/SAUTÉ, KEEP WARM, or YOGURT settings.

Note: Do not use the DELAY TIMER function when the recipe has perishable ingredients such as meat, fish, eggs, or dairy,

as these may spoil.

1. Adjust the Multi-Cooker settings using the instructions on pages 10-14.

2. After setting the cooking time, press the DELAY TIMER button. The DELAY TIMER and START/STOP buttons will

flash, and “0:30” will flash on the Display Screen, to indicate the Multi-Cooker is being programmed on the delay

setting.

3. Press the + and - buttons until you reach the number of hours and minutes you want the cooking process to be

delayed (i.e., set the amount of time you wish to delay the cooking cycle).

4. Press START/STOP button to begin the delay feature. The timer and DELAY TIMER button will stop flashing, while

the START/STOP button will continue flashing. This will indicate that the Multi-Cooker has been set on the DELAY

TIMER setting. The Display Screen will countdown the delay time until 0:00 is reached. When 0:00 is reached, the

DELAY TIMER light will turn off and the START/STOP light will stop flashing to show that time delay has finished. The

word “HEAt” will appear on the display screen until the Multi-Cooker is fully pressurized. When the selected pressure

has been reached, the timer will start counting down.

Example:

It’s 4pm and you want to have a soup cooked and ready in 2 hours’ time for dinner at 6pm. You want to set the machine

now so you are free to do other things.

The pre-set function (if unchanged) will cook for 30 minutes at HIGH pressure. Time to gain pressure varies according to

humidity and water temperature, but let’s assume it takes 15 minutes to gain pressure. Therefore total time is 45 minutes.

To have the stew ready by 6pm, you will need to delay the start of your cooking by approximately 1 hour and 15 minutes.

1. Press SOUP

2. The Display Screen will flash “0:30”

3. Press the DELAY TIMER button and set for “1:15”

4. Press START/STOP

COOKING POT MARKINGS

Inside the removable Cooking Pot are markings to guide the fill level of the Cooking Pot. The word MAX indicates the

maximum fill line.

The 1/3, 1/2, and 2/3 markings are handy guides to use in your recipes.

CAUTION: Never load the Cooking Pot above the maximum ingredient level line marked MAX

on the inside of the Cooking Pot.

Foods that expand during cooking (e.g. rice) should never go above the 1/2 mark.

Note: The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of

liquid is used inside the removable Cooking Pot.

MAX

PRESSURE COOKING

Pressure cooking is an ideal way to create quick, flavorful meals. Pressure cooking is a method of cooking food in liquid

(water, stock, wine, etc.) in a sealed Cooking Pot. The sealed Multi-Cooker retains steam and builds pressure, raising the

temperature of the liquid inside the pot above boiling point. The increased temperature of the liquid and the steam results in

reduced cooking times.

HIGH Pressure Setting is 6.5 - 10 PSI (45 - 70 kPa). It is suitable for a wide range of foods.

LOW Pressure Setting is 3.3 - 6.5 PSI (23 - 45 kPa). It is more suited to delicate foods like chicken fillet, fish and some

vegetables.

KEEP WARM Setting: When cooking time is completed, the Multi-Cooker automatically switches to the KEEP WARM

setting to prevent overcooking and to keep your cooked food warm until serving - perfect for busy families, those on the

run and those who need flexible meal times. This setting is not hot enough to cook and should only be used to keep warm,

cooked food for serving.

Ideal Meals to Pressure Cook: Soups, stocks, casseroles, sauces (e.g. pasta sauces), meat, rice, firm vegetables (beetroot,

potatoes) and desserts (e.g., pudding).

Capacity: Never fill the Cooking Pot above the MAX line. Foods that expand during cooking should never go above the

1/2 mark. The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the

removable Cooking Pot.

MANUAL FUNCTION

This function allows the user to select their own pressure cooking time ranging from 1 minute to 2 hours, with a temperature

selection of Low or High. This is particularly suitable for those users who would like to pressure cook food items not covered

by our other cooking functions. This also gives the user greater scope for sourcing recipes from a wide range of sources.

Please follow our guidelines for Pressure Cooking on page 9.

USING THE PRESSURE COOKING FUNCTIONS

Place the Multi-Cooker on a flat, level surface.

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the

Display Screen will illuminate with four dashes (- - - -).

1. Place your food and liquid inside the removable Cooking Pot.

2. Place the Lid onto the Multi-Cooker and align with . To lock, rotate counterclockwise to the LOCKED position.

3. Using the finger tab, rotate the Steam Release Valve to the “Seal” position.

4. Select the desired cooking function

5. Adjust the cooking time and pressure if necessary.

Note: See the Cooking Guide on page 182 to find the possible time and pressure adjustments

6. Once you have made the desired adjustments, if any, press START/STOP.

7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining

pressure, “HEAt” will appear on the Display Screen and the time will not count down. The amount of time the Multi-

Cooker takes to gain pressure varies according to humidity and water temperature, but average pressurization time is

5-30 minutes. When pressure has been reached, “HEAt” will disappear on the Display Screen, and the time will begin

to count down.

8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM

setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4

hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will go

into stand-by mode, and the Display Screen will illuminate with four dashes (----).

TIP:

1. The pressure cooking settings are in the Cooking Guide table on page 182.

2. If the lid is not shut correctly or if the Steam Release Valve is not in the “Seal” position, the Multi-Cooker cannot gain

pressure and an ERROR message will appear in the Display Screen. Ensure that the Sealing Gasket is placed evenly in

the lid. See the ERROR CODES chart on page 17.

3. It is common for some steam to release through the Bobber Valve during the cooking cycle. This is part of normal

operation of the unit.

Note: The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the

removable Cooking Pot.

Caution: During cooking, steam will build up in the Multi-Cooker, so when lifting the lid use an oven glove to protect your

hands.

RELEASING PRESSURE AT THE END OF COOKING

A. Natural Pressure Release Method: After cooking cycle is complete, let Multi-Cooker naturally release pressure

through the Bobber Valve. Unit will gradually cool down on its own. Wait at least 10 minutes after cooking has

completed. If using a higher volume of food and liquid, this can take up to 20 minutes. And then, using a kitchen

utensil, gradually flick the tab on the Steam Release Valve to the “Release” position (see Figure 2). Do not place

any part of your hand or body over the steam outlet on top of the valve, as steam is very hot and can scald skin. The

pressure has been released when steam is no longer escaping from the valve and the Lid opens freely with minimal

force. Only then is it safe to remove the Lid and serve food.

B. Quick Pressure release method should be used with caution: Using a kitchen utensil, gradually flick the tab on

the Steam Release Valve to the “Release” setting (see Figure 2). Steam will release rapidly from the Steam Release

Valve. Do not place any part of your hand or body over the steam outlet on the top of the valve, as steam is very hot

and can scald skin. Use this method with caution when cooking liquid ingredients such as casseroles, soups, stocks,

beans and pulses. Never use this method when cooking rice, as rice tends to be very delicate. The pressure has been

released when steam is no longer escaping from the valve and the Lid opens freely with minimal force. Only then is it

safe to remove the Lid and serve food.

CAUTION:

1. Do not force the Lid to open. If it does not open easily this means that the Multi-Cooker is still under pressure.

2. During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to protect

your hand.

SLOW COOKING

LOW Setting: This is suitable for simmering and slow cooking. Recommended cooking times in LOW are from 6 to 8 hours.

HIGH Setting: This is for faster cooking. Recommended cooking times in HIGH are from 2 to 4 hours.

KEEP WARM Setting: When cooking time is completed, the Multi-Cooker automatically switches to the KEEP WARM

setting to prevent overcooking and to keep your cooked food warm until serving - perfect for busy families, those on the

run and those who need flexible meal times. This setting is not hot enough to cook and should only be used to keep hot,

cooked food warm for serving.

Note: When slow cooking, the ideal fill level for your ingredients is between the 1/2 and 2/3 marks. Never fill the Cooking

Pot above the MAX line.

Due to the multi-functionality of the CSC051X appliance, its slow cooking function works in a slightly different way

to regular Crock-Pots. If using a recipe for a similar-sized Crock-Pot, you may need to increase the cooking time

for use with the CSC051X.

Pressure Release Valve

Valve CLOSED (“Seal”) Valve OPEN (“Release”) Valve REMOVE

Figure 2

USING THE SLOW COOK FUNCTION

The SLOW COOK function does not use pressure in the cooking process, but some pressure can build inside the unit during

cooking. When using this function, ensure the Steam Release Valve is in the “Release” position. This function will cook

similarly to standard slow cookers, using lower temperatures and longer cooking times to achieve tender, flavorful meals.

Place the Multi-Cooker on a flat, level surface.

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the

Display Screen will illuminate with four dashes (- - - -).

1. Place your food and liquid inside the removable Cooking Pot.

2. Place the Lid onto the Multi-Cooker and align with . To lock, rotate counterclockwise to the LOCKED

position.

3. Using the finger tab, rotate the Steam Release Valve to the “Release” position.

Note: Although this setting will not use pressure in the cooking process, some pressure can build inside the unit

during cooking. This is why it’s important to keep the Steam Release Valve in the “Release” position.

4. Press the SLOW COOK button and adjust the time and temperature as needed.

Note: See the Cooking Guide on page 182 to find the possible time and temperature adjustments.

5. Press START/STOP. The time will begin to count down.

6. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM

setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours)

or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

TIP: The SLOW COOK settings are in the Cooking Guide on page 182.

CAUTION: During slow cooking, steam may build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt

to protect your hand.

STEAMING

The STEAM function is perfect for gently steaming fish and vegetables. It is pre-programmed to use the HIGH pressure

cooking setting. When steaming, use the Steaming Rack.

Capacity: When the Multi-Cooker is used with the STEAM function, the maximum capacity of liquid should be just under the

rack wires, so that the liquid is not touching the food.

Note: The unit cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the removable

Cooking Pot.

USING THE STEAM FUNCTION

Place the Multi-Cooker on a flat, level surface.

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the

Display Screen will illuminate with four dashes (- - - -).

1. Add 250ml of water to the bottom of the removable Cooking Pot and insert the cooking rack. Ensure water is just

under the wires of the rack so that food is not touching water.

2. Place your food on the cooking rack.

3. Place the Lid on and lock by rotating counterclockwise to the LOCKED position.

4. Using the finger tab, flick the Steam Release Valve to the “Seal” position.

5. Press the STEAM button and adjust the time and pressure as needed.

Note: See the Cooking Guide on page 182 to find the possible time and pressure adjustments.

6. Once you have made the desired adjustments, if any, press START/STOP.

7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining

pressure, “HEAt” will appear on the Display Screen and the time will not count down. When pressure has been

reached, “HEAt” will disappear on the Display Screen, and the time will begin to count down.

8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM

setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or

until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

TIP: See the Steaming Chart on page 183.

CAUTION: During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to

protect your hand.

USING THE BROWN/SAUTÉ FUNCTION

This setting does not cook under pressure. It works similarly to standard cooking, requiring dry heat, and therefore does not

need the Lid. Do not use the Lid with this function.

Place the Multi-Cooker on a flat, level surface.

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the

Display Screen will illuminate with four dashes (- - - -).

1. Select the BROWN/SAUTÉ function and adjust the time and temperature if necessary, using the + and - buttons.

2. Press START/STOP.

3. When the Multi-Cooker is pre-heating, “HEAt” will appear on the Display Screen. When the temperature has been

reached, the timer will start counting down. Using plastic tongs, carefully add your food to the hot pot.

BROWN/SAUTÉ can be used for each of the following:

A. Brown (sear) meats for casseroles and soups. Browning meat prior to pressure cooking and slow cooking not only

gives your food great color, but it also seals in the juices and flavors and keeps the meat tender.

B. Sauté onions or mirepoix (mixture of chopped onion, carrot, and celery), among many other foods, often used in

pressure cooker and slow cooker recipes. Sautéing onions allows caramelization which contributes to flavor and color

in the end dish.

Capacity: When the Multi-Cooker is used to brown or sauté it may be best to cook in batches to ensure the food is evenly

cooked.

RICE COOKING

When cooking rice, use the RICE/RISOTTO function. This is suitable for all types of rice, including white and/or brown rice.

The RICE/RISOTTO function cooks under pressure for faster cooking.

Capacity: Since rice expands during cooking, do not fill Cooking Pot above the 1/2 mark when using the RICE/RISOTTO

function.

USING THE RICE/RISOTTO FUNCTION

Place the Multi-Cooker on a flat, level surface.

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the

Display Screen will illuminate with four dashes (- - - -).

1. Measure the desired quantity of rice.

Note: 1 cup uncooked white rice = 2 cups of cooked white rice (approximately). 1 cup uncooked brown rice = 2 cups

cooked brown rice (approximately).

2. Place the measured rice in a strainer and wash rice thoroughly under cold water. Wash until the water runs clear.

This removes excess starch which helps to achieve fluffier rice, and prevents rice grains sticking to the Cooking Pot.

Rinsing the rice reduces the build-up of starchy water and bubbles that sometimes form around the Valve Cover and

Lid, which can cause spitting from the Steam Release Valve.

3. Ensure the Cooking Pot is clean and dry before placing it inside the Heating Base.

4. Place the washed rice in the Cooking Pot. Add the quantity of water needed for your recipe (Standard ratio -- 1 cup of

uncooked rice : 1.5 cups of water). Ensure that a minimum of 250ml of liquid is placed inside the removable Cooking

Pot.

5. Place the Lid on and lock by rotating counterclockwise to the LOCKED position.

6. Using the finger tab, flick the Steam Release Valve to the “Seal” position.

7. Press the RICE/RISOTTO button and adjust the time and pressure as needed.

Note: See the Cooking Guide on page 182 to find the possible time and pressure adjustments.

8. Once you have made the desired adjustments, if any, press START/STOP.

9. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining

pressure, “HEAt” will appear on the Display Screen and the time will not count down. When pressure has been

reached, “HEAt” will disappear on the Display Screen, and the time will begin to count down.

10. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM

setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4

hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn

off.

TIPS:

1. Do not keep rice in the pot for extended periods of time on the KEEP WARM setting, as the rice will become dry and

the quality will deteriorate. Use the supplied plastic spoon to stir and serve the rice. Do not use metal utensils, as

these will scratch the non-stick coating.

2. As rice grains can be delicate, at the end of cooking wait until the pressure releases naturally. Do not use the Quick

Pressure Release Method (see page 11 for instructions on the Natural Pressure Release Method).

3. Standard ratio for cooking rice -- 1 cup of uncooked rice : 1.5 cups of water

CAUTION: During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to

protect your hand.

TO CHANGE A SETTING

It’s easy to switch functions during cooking.

Press the START/STOP button and then select the new desired cooking function. A new timer will flash on the Display

Screen, and the selected function will also flash. Select the desired time, pressure, and/or temperature. Press the START/

STOP button and the new function will begin preheating.

To Change the Cooking Time:

You can change the cooking time before cooking begins by pressing the + and - buttons before pressing START/STOP.

Press and release to change slowly. Press and hold to change time quickly. If you pass the desired temperature or time,

press the opposite button.

To Change the Pressure:

You can change the pressure on certain pre-set functions before cooking begins by pressing the PRESSURE ADJUST

button before pressing START/STOP.

To Change the Temperature:

You can change the temperature on certain functions before cooking begins by pressing the TEMP ADJUST button before

pressing START/STOP.

CARE AND CLEANING

Cleaning should only be carried out when the the Crock-Pot® Express Multi-Cooker is cool and unplugged. Allow the Multi-

Cooker to completely cool before cleaning. Do not use the removable Cooking Pot on the stovetop, inside a microwave

oven or inside an oven. Use the pot only inside the Crock-Pot® Express Multi-Cooker Heating Base. Wash the Sealing

Gasket and Lid by hand in warm, soapy water. Dry all parts thoroughly.

Cooking Pot:

When removing the Cooking Pot from the Heating Base, always use two hands and lift directly upward. Failure to do so

may result in scratching the outside of the Cooking Pot (see figure 3).

If food sticks or burns to the surface of the Cooking Pot, then fill it with hot soapy water and let it soak before cleaning. Use

a rubber or nylon spatula to remove stubborn residue. If scouring is necessary, use a non-abrasive cleaner and a nylon

scouring pad or brush.

Although the Cooking Pot is dishwasher safe, we recommend hand-washing to preserve the non-stick coating.

If white spots form on surface of Cooking Pot, then soak it in a solution of vinegar or lemon juice and warm water for 30

minutes. Rinse and dry.

Note: Never use metal utensils or cleaning devices on the Cooking Pot, as this may result in scratching and damaging the

non-stick coating.

Exterior

Wipe the exterior of the Heating Base with a damp cloth and polish dry. DO NOT use harsh abrasives, scourers or

chemicals, as these will damage the surfaces. To prevent damage to the Multi-Cooker do not use alkaline cleaning agents

when cleaning. Only use a soft cloth and mild detergent. Never immerse the heating base, or power cord and plug in water

or any other liquid.

Condensation Collector

Empty any collected water from the Condensation Collector after each use. Wash in warm, soapy water.

Lid and Sealing Gasket

Always examine the gasket before each use. The silicon Sealing Gasket on the inside of your Multi-Cooker Lid may

deteriorate over time. Remove Sealing Gasket for cleaning as needed. Hand clean using warm, soapy water, dry

thoroughly, and replace Sealing Gasket in Lid before use. Leave the Lid upturned for storage, as this will also extend the

life of the gasket. Sealing Gasket may need to be replaced every 1 – 2 years depending on regular use. Contact Crock-Pot®

customer service to order replacement parts.

Steam Release Valve

Ensure the Steam Release Valve is clear from debris before you begin using the Multi-Cooker. Remove the valve and

gently clean. Ensure it is completely dry before replacing.

Steam Release Valve Cover

The Steam Release Valve Cover is on the underside of the Lid. Ensure it is clear from debris before you begin using the

Multi-Cooker. To clean, carefully pull the cover off and clean using warm, soapy water. Press the cover back into its place

after cleaning is complete.

UNDERSIDE OF LID

Bobber Valve

Gently press the valve up and down 2-3 times and ensure it is clear from debris before you begin using the Multi-Cooker.

Figure 3

Figure 4

Bobber Valve

Steam Release Valve Cover

Lid Lock Pin

Gently press the pin and ensure it is clear from debris before you begin using the Multi-Cooker.

Note:

1. Condensation may collect inside the Heating Base under the removable Cooking Pot. This is normal. Allow to cool,

and then dry using kitchen cloth.

2. Always make sure that each component (pot, valves, gasket, etc.) is completely dry before you put back into the Multi-

Cooker.

TROUBLESHOOTING

Subject Question Solution

Power My Multi-Cooker will not

turn on Make sure outlet is functioning properly

Check that the Multi-Cooker is plugged in

Call Customer Service at 0800 052 3615

Doneness of

food My food was undercooked Make sure you selected the proper cooking setting

Make sure the Lid is properly placed and locked, and that Steam Release

Valve in “Seal” (closed) position.

Check the recipe to see that the proper pressure, temperature, and time

selection were made

Be sure the power was not interrupted

Make sure the Cooking Pot has enough liquid to create desired steam and

build pressure. Minimum of 250ml of liquid should be used when pressure

cooking. Never ll over the “MAX” line.

My food was overcooked Make sure the Cooking Pot was at least ½ full

Check that the proper pressure, temperature, and time were selected

Programming Can I set a time for the

Brown/Sauté program? Because sautéing is a function that generally requires your full attention this

may not be necessary. However, if desired a time can be selected.

Can I change the

cooking function, time or

temperature once the food

is cooking?

Yes, to change the cooking function, press START/STOP and select a new

cooking function. Change the time and temperature as required for the food.

Press START/STOP again. The time and temperature can be changed at

any time.

Cooking Can the Cooking Pot and

Lid be used on top of the

stove or in the oven?

The Cooking Pot and Lid are not oven safe. Neither can be used on the

stove or in the oven.

I stopped the cooking

process and changed

pressure settings, and

now the Multi-Cooker is

preheating again.

If a cooking cycle is stopped and a new one is started, the Multi-Cooker

may display “HEAt” until the new pressure is achieved.

Steam Steam is leaking out of

the Multi-Cooker • It is normal for a small amount of steam to come out of the Bobber Valve

before the Multi-Cooker is pressurized.

• If steam is coming out from the perimeter of the Lid, the Lid has not been

closed and locked completely.

Lid I am having trouble

removing the Lid. There is a safety feature to keep Lid from being removed while the Multi-

Cooker is under pressure. Please make sure to de-pressurize the unit by

rotating the Steam Release Valve into the “Release” (open) position. Refer

to Releasing Pressure section for further instructions.

ERROR CODES

Error Solution

“CLOSE LID” blinking

light Ensure that the Lid is closed completely and in the LOCKED position, aligning with .

Display “E1” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service center.

Display “E2” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service center.

Display “E3” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down

completely. Once Multi-Cooker has cooled down, check all parts of the Lid (See page 16). Turn

Lid to LOCKED position. Ensure Steam Release Valve is in “Seal” (closed) position. If this

error code occurs again, unplug Multi-Cooker and contact service center.

Display “E4” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down

completely. Once Multi-Cooker has cooled down, check Cooking Pot to ensure there is enough

liquid inside. Add more liquid if necessary (Minimum 250ml). Ensure no steam is coming out of

Cooking Pot before placing Lid back on Multi-Cooker. Turn Lid to LOCKED position. Ensure

Steam Release Valve is in “Seal” (closed) position. Select a pressure cooking function, and

then press START/STOP.

Display “E5” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once it is

cooled down, remove the Lid and check the Cooking Pot. Do not use the Lid when using the

BROWN/SAUTÉ function.

When using the SLOW COOK function, make sure that the Steam Release Valve is in the

“Release” (open) position before starting the cooking cycle.

Display “E6” The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once it

is cooled down, remove the Lid and check the Cooking Pot. Add liquid as necessary. Ensure

a minimum of 250ml of liquid is used inside the removable Cooking Pot. If using a pressure

cooking function, ensure that the Steam Release Valve is in the “Seal” (closed) position.

HINTS AND TIPS

Hints and Tips to get the best use of your Crock-Pot® Express Multi-Cooker: Go to the Crock-Pot® website at

www.crockpot.co.uk for additional recipes, hints, tips and much more.

With your Crock-Pot® Express you can create a large variety of delicious meals, snacks and desserts. Various foods take

different times to cook perfectly, so sometimes it may take some trial and error to get the cooking times right for you.

1. Please refer to your Crock-Pot® Express owner’s manual when using your Multi-Cooker.

2. Never fill the Cooking Pot past the MAX line.

3. Do not leave Multi-Cooker plugged in when not in use.

4. Make sure Multi-Cooker is kept away from cabinets and walls when in use.

5. The Cooking Pot is designed to be used only in this Multi-Cooker. Do not use on stovetop, in microwave, or in oven.

6. The provided Steaming Rack is designed to be used in this Multi-Cooker. It should not damage the surface of the

Cooking Pot.

7. When removing the Lid, use a pot holder to grasp the Lid Handle and lift away from your body to allow steam to

escape.

8. Always place a trivet or pot holder under the Cooking Pot if it is removed from the Heating Base.

HINTS AND TIPS FOR SLOW COOKING

• If you are slow cooking, you can use the BROWN/SAUTÉ function first, which allows you to sear meats and

vegetables at the beginning but also allows you to thicken sauces and make gravies at the end. Browning meat prior

to slow cooking not only gives your food great color, but it also seals in the juices and flavors and keeps the meat

tender.

• To thicken a casserole at the end of cooking, use the BROWN/SAUTÉ function and stir a small amount of corn flour

with water. Allow to simmer, stirring until thickened.

• When using the SLOW COOK function, make sure the Steam Release Valve is in the “Release” (open) position.

• When using the SLOW COOK function, the Multi-Cooker does not recover lost heat quickly, so only lift the Lid if

necessary or if instructed to do so in the recipe. It’s a good idea to monitor your slow cooking results throughout the

cooking cycle by quickly removing the Lid and checking, then quickly replacing the Lid. Different cuts and thickness of

meats and vegetables can vary cooking times.

• It is not uncommon for meat to cook faster than root vegetables. It is for this reason that we recommend chopping

all vegetables to a similar small size. Meat can be cut into larger chunks because if it is cut too small, it will break up

once cooked and tenderized.

• Slow Cooking reduces evaporation, resulting in the flavors and juices being maintained. Keep this in mind when

creating your own recipes, as you may not require as much liquid as you would when using other cooking methods.

Temperature Temperature Suggestions Recipes Ideas

High Use this setting for recipes that require shorter cooking

times, generally 4-6 hours. Ideal for sauces, chili, potato dishes, cheese

dishes, chicken wings and meatballs in sauce

Low Use this setting for recipes that require longer cook

times. This setting is used for recipes that usually

require cooking for more than 8 hours. Perfect for less

tender cuts of meats.

Ideal for less tender cuts of meat, braised

meats, dried beans, soups and stews

AFTER SALES SERVICE

These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the

appliance fails to operate:

1. Check that the instructions have been followed correctly.

2. Check that the fuse has not blown.

3. Check that the mains supply is functional.

If the appliance will still not operate, return it to the place it was purchased for a replacement. To return the appliance to the

Customer Service Department, follow the steps below:

1. Pack it carefully (preferably in the original carton). Ensure the appliance is clean.

2. Enclose your name and address and quote the model number on all correspondence.

3. Give the reason why you are returning it.

4. If within the guarantee period, state when and where it was purchased and include proof of purchase (e.g. till receipt).

5. Send it to our Customer Service Department at the address below:

Customer Service Department

Jarden Consumer Solutions (Europe) Limited

Middleton Road, Royton, Oldham

OL2 5LN, UK

Telephone:

• 0800 525089 (free from UK landlines)

• 0161 621 6900 (standard rates apply)

Fax: 0161 626 0391

e-mail: [email protected]

GUARANTEE

Please keep your receipt as this will be required for any claims under this guarantee.

This appliance is guaranteed for 2 years after your purchase as described in this document.

During this guaranteed period, if in the unlikely event the appliance no longer functions due to a design or manufacturing

fault, please take it back to the place of purchase, with your till receipt and a copy of this guarantee.

The rights and benefits under this guarantee are additional to your statutory rights, which are not affected by this guarantee.

Only Jarden Consumer Solutions (Europe) Limited (“JCS (Europe)”) has the right to change these terms.

JCS (Europe) undertakes within the guarantee period to repair or replace the appliance, or any part of appliance found to

be not working properly free of charge provided that:

• you promptly notify the place of purchase or JCS (Europe) of the problem; and

• the appliance has not been altered in any way or subjected to damage, misuse, abuse, repair or alteration by a person

other than a person authorised by JCS (Europe).

Faults that occur through, improper use, damage, abuse, use with incorrect voltage, acts of nature, events beyond the

control of JCS (Europe), repair or alteration by a person other than a person authorised by JCS (Europe) or failure to follow

instructions for use are not covered by this guarantee. Additionally, normal wear and tear, including, but not limited to, minor

discoloration and scratches are not covered by this guarantee.

The rights under this guarantee shall only apply to the original purchaser and shall not extend to commercial or communal

use.

If your appliance includes a country-specific guarantee or warranty insert please refer to the terms and conditions of such

guarantee or warranty in place of this guarantee or contact your local authorized dealer for more information.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. E-mail us at

[email protected] for further recycling and WEEE information.

Jarden Consumer Solutions (Europe) Limited

5400 Lakeside

Cheadle Royal Business Park

Cheadle

SK8 3GQ

FRANÇAIS

CONSIGNES DE SÉCURITÉ IMPORTANTES

En cas de détérioration du fil électrique ou de la prise d’alimentation, ils

doivent être remplacés par le fabricant, son agent de service après-vente ou

une personne qualifiée pour éviter tout danger.

1. Lisez toutes les instructions avant d'utiliser cet appareil.

2. Cet appareil ne doit pas être utilisé par des enfants. Tenez l'appareil

et son cordon hors de portée des enfants. Les enfants ne doivent pas

jouer avec l’appareil. Il peut être utilisé par des personnes aux capacités

physiques, sensorielles ou intellectuelles réduites, ou encore des

personnes n’ayant aucune connaissance ou expérience de l'appareil, à

condition d'avoir été formées à son utilisation correcte et de comprendre

les risques encourus.

3. N'utilisez pas l'appareil si son cordon d'alimentation ou sa fiche

sont endommagés, s'il ne fonctionne pas correctement ou s'il a

été endommagé de quelque manière que ce soit. Ne tentez pas de

remplacer ou de raccorder un cordon endommagé. Retournez l’appareil

au fabricant (voir garantie) pour qu’il soit examiné, réparé ou réglé. Si

le cordon d'alimentation est endommagé, il doit être remplacé par un

cordon ou un élément prévu à cet effet, disponible auprès du fabricant

ou d'un centre de réparation agréé.

4. N’utilisez pas cet appareil à l’extérieur ni dans un cadre commercial.

5. N'utilisez pas l’appareil à des fins autres que celles auxquelles il est

destiné. Une utilisation abusive peut provoquer des blessures. Cet

appareil n’est pas conçu pour la friture.

6. Cet appareil cuit sous pression si vous utilisez les fonctions de cuisson

sous pression. Une utilisation incorrecte peut entraîner des brûlures.

Veillez à fermer correctement l’appareil avant de l’utiliser. Reportez-vous

au mode d’emploi.

7. Cet appareil génère de la chaleur en cours d'utilisation. Ne touchez pas

les surfaces chaudes. Utilisez les poignées ou les boutons.

CONSIGNE DE SÉCURITÉ IMPORTANTE :

Lorsque vous décompressez l’appareil, veillez à porter un gant de cuisine

et utilisez un ustensile de cuisine pour ouvrir graduellement la soupape et

laisser s’échapper la vapeur. Faites attention à la vapeur qui se dégage.

Veillez à ne JAMAIS plonger la base chauffante, le cordon d'alimentation

ou la prise dans de l'eau ou tout autre liquide.

Stránka sa načítava ...

Crock-Pot CSC051X Návod na obsluhu

Značka: Crock-Pot

Model: CSC051X

Typ: Návod na obsluhu

Táto príručka je tiež vhodná pre

Stiahnite si PDF

správa

V iných jazykoch

português: Crock-Pot CSC051X Manual do proprietário
français: Crock-Pot CSC051X Le manuel du propriétaire
italiano: Crock-Pot CSC051X Manuale del proprietario
Nederlands: Crock-Pot CSC051X de handleiding
dansk: Crock-Pot CSC051X Brugervejledning
svenska: Crock-Pot CSC051X Bruksanvisning
română: Crock-Pot CSC051X Manualul proprietarului

Crock-Pot CSC051X Návod na obsluhu

Táto príručka je tiež vhodná pre

Crock-Pot CSC051X Návod na obsluhu

V iných jazykoch

Ďalšie dokumenty