Sony KV-29XL71K Návod na obsluhu

Kategória
Televízory LCD
Typ
Návod na obsluhu
R
2-024-605-41(3)
Trinitron Colour
Television
KV-29XL71K
©2004 by Sony Corporation
Operating Instructions
GB
Before operating the TV, please read the “Safety Information”
section of this manual. Retain this manual for future reference.
Инструкции за използване
BG
Преди да използвате телевизора, прочетете раздела
"Информация за безопасността" на това ръководство.
Запазете това ръководство за бъдещи справки.
Návod k použití
CZ
Před zapnutím televizoru si prosím pozorně přečtěte část
"Bezpečnostní upozornění" v tomto návodu. Návod si uschovejte
i pro budoucí potřebu.
Kezelési utasítás
HU
Mielőtt elkezdené használni a televíziót, kérjük, olvassa el a jelen
kézikönyv Biztonsági tudnivalók c. szakaszát. Őrizze meg a
kézikönyvet későbbi használatra.
Instrukcja obsługi
PL
Przed przystąpieniem do eksploatacji telewizora należy zapoznać się z
rozdziałem "Informacje dotyczące bezpieczeństwa" w niniejszej instrukcji.
Prosimy o zachowanie niniejszej instrukcji do wglądu w przyszłości.
Инструкция по эксплуатации
RU
Перед тем как включить телевизор, просим Вас ознакомиться с
разделом "Общие правила техники безопасности" настоящей
инструкции. Сохраняйте настоящую инструкцию на будущее.
202460541
29XL71cover(K).fm Page 1 Thursday, June 17, 2004 11:26 AM
cover(K).fm Page 2 Friday, March 5, 2004 3:14 PM
Table of Contents 3
Introduction
GB
Thank you for choosing this Sony FD Trinitron Colour Television.
Before operating the TV, please read this manual thoroughly and retain it for future reference.
Table of Contents
Safety Information
Safety Information..................................................................................................................................... 4
Overview
Overview of the remote control buttons .................................................................................................... 5
Overview of the TV buttons ...................................................................................................................... 6
Installation
Inserting batteries into the remote control................................................................................................. 6
Connecting the aerial and VCR................................................................................................................. 6
First Time Operation
Switching on the TV and automatically tuning in channels ....................................................................... 7
Menu system
Introducing and Using the Menu System .................................................................................................. 9
Menu Guide:
Picture Adjustment......................................................................................................................... 9
Sound Adjustment ......................................................................................................................... 10
Sleep Timer ................................................................................................................................... 11
Language/Country ......................................................................................................................... 11
Auto Tuning ................................................................................................................................... 11
Programme Sorting........................................................................................................................ 12
Programme Labels ........................................................................................................................ 12
AV Preset....................................................................................................................................... 12
Noise Reduction ............................................................................................................................ 12
Manual Programme Preset............................................................................................................ 13
AV3 Output.................................................................................................................................... 14
TV Speakers.................................................................................................................................. 14
RGB Centring ................................................................................................................................ 14
Picture Rotation ............................................................................................................................. 15
PIP Input........................................................................................................................................ 15
PIP Position ................................................................................................................................... 15
Teletext..................................................................................................................................................... 16
Additional Information
Connecting Optional Equipment ............................................................................................................... 17
Using Optional Equipment ........................................................................................................................18
Remote Control Configuration for VCR/DVD ............................................................................................ 19
Specifications............................................................................................................................................ 20
Troubleshooting ........................................................................................................................................ 21
01gb29xl.fm Page 3 Tuesday, March 30, 2004 11:48 AM
4 Safety Information
Safety Information
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
To prevent fire, keep inflammable
objects or naked lights (eg candles)
away from the TV.
Pull out the power lead by the plug.
Do not pull on the power lead itself.
Place the TV on a secure stable stand.
Never attempt to move the TV and
stand together -always move the TV
and stand separately. Do not place the
TV on its side or face up. Do not allow
children to climb on to it.
This set is to operate on a 220-240V
AC supply only. Take care not to
connect too many appliances to the
same power socket as this could result
in fire or electric shock.
To prevent fire or shock hazard, do
not expose the TV to rain or moisture.
For your own safety, do not touch any
part of the TV, power lead or aerial
lead during lightning storms.
Do not cover the ventilation openings
of the TV For ventilation, leave a space
of at least 10cm all around the set.
Do not cover the ventilation
openings of the TV with items such
as curtains or newspapers etc.
Never push objects of any kind into the
set as this could result in a fire or
electric shock. Never spill liquid of any
kind on the set. If any liquid or solid
object does fall into the cabinet, do not
operate the TV. Have it checked
immediately by qualified personnel.
Take care not to place heavy objects
on the power lead as this could result
in damage.
We recommend you wind any excess
lead around the holders provided on
the rear of the TV.
Unplug the power lead before moving
the TV. Avoid uneven surfaces, quick
steps or excessive force. If the set has
been dropped or damaged, have it
checked immediately by qualified
service personnel.
Clean the screen and cabinet with a
soft, lightly dampened cloth. Do not use
any type of abrasive pad, alkaline
cleaner, scouring powder or solvent,
such as alcohol or benzine, or antistatic
spray. As a safety precaution, unplug
the TV before cleaning it.
Never place the TV in hot, humid or
excessively dusty places. Do not
install the TV where it may be
exposed to mechanical vibrations.
For environmental and safety reasons,
it is recommended that the TV set is not
left in standby mode when not in use.
Disconnect from the mains. However,
some TVs may have features which
require they are left in standby. The
instructions in this manual will inform
you if this applies.
01gb29xl.fm Page 4 Tuesday, March 30, 2004 11:48 AM
Overview 5
Overview of the remote control buttons
GB
1 To temporarily switch off the TV:
Press this button to temporarily switch off TV (the standby indicator on TV
lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being pressed,
the TV switches automatically into standby mode.
2 Selecting the input source:
Press this button repeatedly until the desired input symbol of the source
appears on the TV screen.
3 Selecting channels:
Press these buttons to select channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
4 a) If Media Selector button is switched toTV:
Press this button to watch the last channel selected (provided you watched it
for at least 5 seconds).
b) If Media Selector button is switched to VCR:
For Sony VCR double-digit programme numbers, eg 23, press -/-- first, then
the buttons 2 and 3.
5 This button only works in Teletext mode.
6 Selecting screen format:
Press this button to view programmes in 16:9 mode. Press again to return to
4:3 mode.
7 Selecting Teletext:
Press this button to switch on teletext.
8 a) If Media Selector is switched to TV:
When MENU is switched on, use these buttons to operate the menu
system. For details refer to “Introducing and using the Menu System” .
When MENU is switched off, press OK to show a channel overview. Then
press v or V to select the channel and then press the OK button again to
watch the selected channel.
b) If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
1
2
w;
qk
qj
qh
qg
qf
qd
qs
4
6
7
8
0
qa
wa
5
9
3
ql
9 Recording button:
If the Media Selector button is switched to VCR, press
this button to record programmes.
q; Media Selector:
With this remote control you can operate not only this TV
but also the main functions of your VCR or DVD. Switch
on the device you want to operate and next press this
button repeatedly to select the VCR, TV or DVD. A green
light illuminates momentarily.
Before you can control a DVD or VCR using this remote
control, you need to set up the control. For more details,
refer to chapter ‘Remote Control Configuration for VCR
or DVD’.
qa Selecting channels:
Press this button to select the next or previous broadcast
channel.
qs Muting the Sound:
Press this button to mute TV sound. Press again to
restore the sound.
qd Adjusting the TV volume:
Press this button to adjust the volume of the TV.
qf Displaying the menu system:
Press this button to display the menu on the TV screen.
Press again to remove the menu display from the TV
screen.
qg Selecting TV mode:
Press this button to switch off “PIP”, teletext or video
input.
qh Selecting Sound effect:
Press this button repeatedly to change the sound effect.
qj Selecting Picture mode:
Press this button repeatedly to change the picture mode.
qk Displaying on Screen information:
Press this button to display all on-screen indications.
Press again to cancel.
ql Swapping screens:
Whilst you are in “PIP” mode, press this button to swap
the two screens.
w; VCR or DVD on/off:
Press this button to switch on or off your VCR/DVD.
wa PIP (Picture in Picture):
Press this button to watch another source in a small
picture (PIP) within the main TV picture. Press again to
cancel. To select the source you want to watch, refer to
the chapter PIP Input’.
Besides the TV functions, all coloured and green symbol buttons are also used for Teletext operation. For more details,
please refer to “Teletext” section of this instruction manual.
01gb29xl.fm Page 5 Tuesday, March 30, 2004 11:48 AM
6 Overview-Installation
Overview of TV Buttons
4 4
o4
Audio
Input jacks
Video Input
jack
Selecting
Input source
Headphones
jack
Standby
indicator
Auto Start Up
Button
S video Input
jack
Volume control
buttons
Programme Up or Down
Buttons (Selects TV
channels)
Press on the
mark on the door
flap to reveal the
control panel.
On/Off
switch
Inserting batteries into the remote control
Make sure you insert the supplied batteries observing the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
Connecting cables are not supplied.
SONY CORPORATION
JAPAN/4
S
O
N
Y
C
O
R
P
O
R
A
T
IO
N
J
A
P
A
N
/4
For more details of VCR connection, please refer to the section Connecting Optional
Equipment of this instruction manual.
or
VCR
Scart lead is optional
01gb29xl.fm Page 6 Tuesday, March 30, 2004 11:48 AM
First Time Operation 7
Switching on the TV and Automatically Tuning
GB
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the
language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) adjust the picture slant
4) search for and store all available channels (TV Broadcasts) and 5) change the order in which the channels (TV
broadcasts) appear on the screen. However, if you need to change any of these settings at a later date, you can do
that by selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on
the TV set.
1
Connect the TV plug to the mains socket (220-240V AC, 50Hz). The first
time that the TV set is connected, it is usually turned on. If the TV is off,
press the on/off button on the TV set to turn on the TV. The first time
you switch on the TV, a Language menu appears automatically on the TV
screen.
2
Press the v or V button on the remote control to select the language, then
press the OK button to confirm your selection. From now on all the menus
will appear in the selected language.
3
The Country menu appears automatically on the TV screen. Press the v
or V
button to select the country in which you will operate the TV set, then
press the OK button to confirm your selection.
If the country in which you want to use the TV set does not appear
in the list, select - instead of a country.
In order to avoid wrong teletext characters for Cyrillic languages we
recommend you select Russia as the country if your own country
does not appear in the list.
4
Because of the earths magnetism, the picture might slant. The Picture
Rotation menu allows you to correct the picture slant if it is necessary.
a) If it is not necessary, press the v or V button to select Not necessary
and press OK.
b) If it is necessary, press the v or V button to select Adjust now, then
press OK and correct any slant of the picture between 5 and +5 by
pressing the v or V button. Finally press OK to store.
Language
Select Language:
i
v
Svenska
Norsk
English
Nederlands
Français
Italiano
i
V
OK
Country
Select country:
i
v
Sverige
Norge
-
Italia
Deutschland
Österreich
i
V
OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
continued...
01gb29xl.fm Page 7 Tuesday, March 30, 2004 11:48 AM
8 First Time Operation
Switching on the TV and Automatically Tuning
5
The Auto Tuning menu appears on the screen. Press the OK button to
select Yes.
6
The TV starts to automatically search and store all available broadcast
channels for you.
This procedure could take some minutes. Please be patient and do
not press any buttons, otherwise the automatic tuning will not be
completed.
If no channels were found during the auto tuning process then a new
menu appears automatically on the screen asking you to connect the
aerial. Please connect the aerial (see page 6) and press OK. The
auto tuning process starts again.
7
After all available channels are captured and stored, the Programme
Sorting menu appears automatically on the screen enabling you to
change the order in which the channels appear on the screen.
a) If you wish to keep the broadcast channels in their tuned order, go to
step 8.
b) If you wish to store the channels in a different order:
1 Press the v or V button to select the programme number that has
the channel (TV Broadcast) you wish to rearrange, then press the b
button.
2 Press the v or V button to to select the new programme number
position for your selected channel (TV Broadcast), then press B.
3 Repeat steps b)1 and b)2 if you wish to change the order of the other
channels.
8
Press the MENU button to remove the menu from the screen.
Your TV is now ready for use.
Do you want to start
automatic tuning?
Ye s
No
OK
No channel found
Please connect aerial
Confirm
OK
Programme: 01
System: B/G
Channel: C21
Auto Tuning
Searching...
Programme Sorting
Select channel:
Exit:
MENU
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
OK
Programme Sorting
Select new position:
Exit:
MENU
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58 05 C27
OK
MENU
01gb29xl.fm Page 8 Tuesday, March 30, 2004 11:48 AM
Menu System 9
Introducing and Using the Menu System
GB
Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
1
Press the MENU button to switch the first level menu on.
2
To highlight the desired menu or option, press v or V button.
To enter to the selected menu or option, press b.
To return to the last menu or option, press B
.
To alter the settings of your selected option, press v/V/B or b.
To confirm and store your selection, press the OK button.
3
Press the MENU button to remove the menu from the screen.
Menu Guide
Level 1 Level 2 Level 3 / Function
PICTURE ADJUSTMENT
The Picture Adjustment menu allows you to alter the
picture adjustments.
To do this:
After selecting the item you want to alter press the b button,
then repeatedly press the v/V/B or b buttons to make any
adjustments and finally press the OK button to store.
This menu also allows you to customise the picture mode
based on the programme you are watching:
v Personal (for individual settings).
v Live (for live broadcast programmes, DVD and Digital
Set Top Box receivers).
v Movie (for films).
Brightness, Colour and Sharpness can only be altered
if Personal mode is selected.
Hue is only available for NTSC colour signal (e.g: USA
video tapes).
Select Reset and press the OK button to return the
picture settings to their factory preset levels.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
MENU
MENU
01gb29xl.fm Page 9 Tuesday, March 30, 2004 11:48 AM
10 Menu System
Introducing and Using the Menu System
Level 1 Level 2 Level 3 / Function
SOUND ADJUSTMENT
The Sound Adjustment menu allows you to alter the sound
settings.
To do this:
After selecting the item you want to alter press the b button,
then repeatedly press the v/V/B or b buttons to make any
adjustments and finally press the OK button to store.
Effect bvNatural: Enhances clarity, detail and presence of sound by using the BBE High
Definition Sound system*.
v Dynamic: BBE High Definition Sound system* intensifies clarity and presence of sound
for better intelligibility and musical realism.
v Dolby**Virtual: Simulates the sound effect of Dolby Surround Pro Logic.
v Off: Flat response.
Treble bBLess b More
Bass bBLess b More
Balance bBLeft b Right
Reset Resets the sound to the factory preset levels.
Dual Sound b For a stereo broadcast:
v Mono.
v Stereo.
For a bilingual broadcast:
v Mono (for mono channel if available).
v A (for channel 1).
v B (for channel 2).
Auto Volume bvOff: volume level changes according to the broadcast signal.
v On: volume level of the channels will stay the same, independent of the broadcast signal (e.g. in
the case of advertisements).
If you are listening to the TV through headphones, the Effect option is automatically switched to Off.
If you select Dolby Virtual in the Effect option, the Auto Volume option is automatically switched to Off and vice
versa.
*The BBE High Definition Sound system is manufactured by Sony Corporation under license from BBE Sound,
Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word BBE and BBE Symbol are
trademarks of BBE Sound, Inc.
** This TV has been designed to create the Dolby Surround sound effect by simulating the sound of four speakers
with only two speakers, when the broadcast audio signal is Dolby Surround encoded. The sound effect can also
be improved by connecting a suitable external amplifier (for details refer to Connecting to external audio
Equipment on page 19).
** Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
K
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Sound Adjustment
Effect: Natural
Treble
Bass
Balance
Reset
Dual Sound: Mono
Auto volume: On
OK
Sound Adjustment
Effect: Natural
Treble
Bass
Balance
Reset
Dual Sound: Mono
Auto volume: On
OK
01gb29xl.fm Page 10 Tuesday, March 30, 2004 11:48 AM
Menu System 11
Introducing and Using the Menu System
GB
Level 1 Level 2 Level 3 / Function
SLEEP TIMER
The Sleep Timer option in the Timer menu allows you to
select a time period for the TV to automatically switch itself
into the standby mode.
To do this: After selecting the option, press the b button
then press the v or V button to set the time period delay
(max. of 4 hours) and finally press the OK button to store.
While watching the TV, you can press the button on
the remote control to display the time remaining.
One minute before the TV switches itself into standby
mode, the time remaining is displayed on the TV screen
automatically.
LANGUAGE / COUNTRY
The Language/Country option in the Set Up menu allows
you to select the language that the menus are displayed in.
It also allows you to select the country in which you wish to
operate the TV set.
To do this: After selecting the option, press the b button
then proceed in the same way as in the steps 2 and 3 of the
section Switching On the TV and Automatically Tuning on
page 7.
AUTO TUNING
The Auto Tuning option in the Set Up menu allows you
to automatically search for and store all available TV
channels.
To do this: After selecting the option, press the
b button
then proceed in the same way as in TV steps 5 and 6 of the
section Switching On the TV and Automatically Tuning on
page 8.
PROGRAMME SORTING
The Programme Sorting option in the Set Up menu
allows you to change the order in which the channels (TV
Broadcasts) appear on the screen.
To do this:
After selecting the option, press the
b button then proceed
in the same way as in step 7 b) of the section Switching On
the TV and Automatically Tuning on page 8.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Timer
Sleep Timer: Off
OK
Timer
Sleep Timer: Off
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
01gb29xl.fm Page 11 Tuesday, March 30, 2004 11:48 AM
12 Menu System
Introducing and Using the Menu System
Level 1 Level 2 Level 3 / Function
PROGRAMME LABELS
The Programme Labels option in the Set Up menu
allows you to name a channel using up to five characters
(letters or numbers).
To do this:
1 After selecting the option, press the b button, then press
the v or V buttons to select the programme number of
the channel you wish to name.
2 Press b button. With the first element of the Label
column highlighted, press v or V buttons to select a
letter or number (select - for a blank), then press the b
button to confirm the character. Select the other four
characters in the same way. Finally press the OK to
store.
AV PRESET
The AV Preset option in the Set Up menu allows you to
designate a name to the external equipment you have
connected to the sockets of this TV.
To do this:
1 After selecting the option, press the b button, then press
the v or V buttons to select the input source you wish to
name (AV1, AV2 and AV3 represent the rear Scart
sockets and AV4 is for the front connectors). Then
press the b button to confirm.
2 A predefined label automatically appears in the label
column:
a) If you want to use one of the 6 predefined labels
(CABLE, GAME, CAM, DVD, VIDEO or SAT), press
the v or V buttons to select the desired label, then
press OK button to store.
b) If you want to set a different label, select Edit and
press b button. Then with the first element
highlighted, press the v or V buttons to select a
letter, number or - for a blank, then press b button
to confirm the character. Select the other four
characters in the same way. Finally press the OK
button to store.
NOISE REDUCTION
The Noise Reduction option in the Detail Set Up menu
allows you to automatically reduce any picture noise visible
in the broadcast signal.
To do this:
After selecting the option, press the b button. Then press
the v or
V buttons to select Auto. Finally press the OK
button to confirm and store.
To cancel this function later on, select Off instead of Auto
in the step above.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
01gb29xl.fm Page 12 Tuesday, March 30, 2004 11:48 AM
Menu System 13
Introducing and Using the Menu System
GB
Level 1 Level 2 Level 3 / Function
MANUAL PROGRAMME PRESET
The Manual Programme Preset option in the Set Up
menu allows you to:
a) Preset channels or the VCR channel one by one to the
programme order of your choice.
To do this:
1 After selecting the Manual Programme Preset option,
press the b button then with Programme option
highlighted press the b button.
Press the v or V buttons to select which programme
number you want to preset the channel to (for VCR,
select programme number 0). Then press the B
button.
2 The availability of this option depends on the country you have selected in the Language/Country menu.
After selecting the System option, press the
b button. Then press the v or V buttons to select the TV Broadcast
system (B/G for western European countries or D/K for eastern European countries). Press the B button.
3 After selecting the Channel option, press the
b button. Then press the v or V buttons to select the channel tuning
(C for terrestrial channels or S for cable channels). Next press
b button. After that, press the numbered buttons to
directly enter the channel number of the TV Broadcast or the VCR channel. If you do not know the channel number,
press the v or
V buttons to search for it. When you have tuned to the desired channel, press the OK button twice to
store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: After highlighting the Programme option, press the PROG +/- button to select the programme number of
the channel you wish to name. When the programme you want to name appears on the screen, select the Label option
and press
b button. Next press the v or V buttons to select a letter, number or - for a blank. Press the b button to
confirm thecharacter. Select the other four characters in the same way. After selecting all the characters, press the
OK button twice to store.
c) Manually fine tune the TV to obtain a better picture reception if the picture is distorted.
Normally the automatic fine tuning (AFT) is in operation, but you can alter it manually.
To do this: Whilst watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press
b
button. Next press the v or
V buttons to adjust the fine tuning between -15 and +15. Finally press the OK button twice
to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: After highlighting the Programme option, press the PROG +/- button to select the programme number
you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press the
b button. Next press the v or
V buttons to select Yes. Finally press the OK button twice to confirm and store.
To cancel this function afterwards, select No instead of Yes in the step above.
e) View and record scrambled channels when using a decoder connected directly to the Scart socket 3/ 3 or
through a VCR.
The availability of this option depends on the country you have selected in the Language/Country menu.
To do this: Select the Decoder option and press the b button. Next press the v or
V buttons to select On. Finally
press the OK button twice to confirm and store.
To cancel this function afterwards, select Off instead of On in the step above.
S
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
01gb29xl.fm Page 13 Tuesday, March 30, 2004 11:48 AM
14 Menu System
Introducing and Using the Menu System
Level 1 Level 2 Level 3 / Function
AV3 OUTPUT
The AV3 Output option in the Detail Set Up menu allows
you to select the source to be output from the Scart
connector 3/ 3 so you can record from this Scart
any signal coming from the TV or from external equipment
connected to Scart connectors 1/ 1 or 2/ 2
or the front connectors 4 or 4 and 4.
If your VCR supports Smartlink, this procedure is not
necessary.
To do this:
After selecting the option, press the b button. Then press
the v or
V buttons to select the desired output signal: TV,
AV1, AV2, AV4, YC4 or AUTO.
If you select AUTO, the output signal will always be
the same one that is displayed on the screen.
If you have connected a decoder to the Scart socket
3/ 3 or to a VCR connected to that Scart
socket, please remember to set the AV3 Output to
AUTO or TV for correct unscrambling.
TV SPEAKERS
The TV Speakers option in the Detail Set Up menu
allows you to mute the TV speakers in order to listen to the
TV from an external amplifier connected to the audio
outputs on the rear of the TV set.
To do this: After selecting the option, press the b button.
Then press the v or
V buttons to select Off. Finally press
the OK button to confirm and store.
To cancel this function later on, select On instead of Off
in the step above.
RGB CENTRING
When connecting an RGB source, such as a PlayStation,
you may need to readjust the horizontal position of the
picture. In that case, you can readjust it using the RGB
Centring option in the Detail Set Up.
To do this: While watching an RGB source select the RGB
Centring option and press the b button. Then press the v
or
V buttons to adjust the centre of the picture between 10
and +10. Finally press the OK button to confirm and store.
S
S
S
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
01gb29xl.fm Page 14 Tuesday, March 30, 2004 11:48 AM
Menu System 15
Introducing and Using the Menu System
GB
Level 1 Level 2 Level 3 / Function
PICTURE ROTATION
Because of the earths magnetism, the picture might slant.
If this is the case, you can correct the pictures slant by using
the option Picture Rotation in the Detail Set Up menu.
To do this: After selecting the option, press the b button.
Then press the v or
V buttons to correct any slant of the
picture between -5 and +5 and finally press the OK button
to store.
PIP INPUT
The PIP Input option in the Detail Set Up menu allows
you to select which picture source you want to watch in the
PIP screen.
To do this: After selecting the option, press the b button.
Then repeatedly press the v or
V buttons to select the
desired source (AV1, AV2, AV3, AV4 or TV). Finally press
the OK button to store.
To watch the selected source of the PIP screen,
press the / button on the remote control.
You can swap the screens by pressing the /
button on the remote control.
PIP POSITION
The PIP Position option in the Detail Set Up menu allows
you to change the position of the PIP screen within the
main screen.
To do this: After selecting the option the v, B, V or b button
to select the desired position. Finally press the OK button to
store.
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
PIP Input: AV1
PIP Position:
Auto
TV
On
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
B
A
A
BB
B
A
01gb29xl.fm Page 15 Tuesday, March 30, 2004 11:48 AM
16 Teletext
Teletext
GB
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
Teletext is an information service transmitted by most TV stations. The index page
of the teletext service (usually page 100) gives you information on how to use the
service. To operate teletext, use the remote control buttons as indicated below.
Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
To Switch on Teletext:
After selecting the TV channel which carries the teletext service you wish
to view, press the button.
To Select a Teletext page:
Input the 3 digits of the page number, using the numbered buttons.
If you have made a mistake, retype the correct page number.
If the counter on the screen continues searching, it is because the page is not
available.
In that case, input another page number.
To access the next or preceding page:
Press PROG + () or PROG - ( ) buttons.
To superimpose teletext onto the TV:
Whilst you are viewing teletext, press the button. Press again to cancel teletext
mode.
To freeze a teletext page:
Press the /
button. Press again to cancel freeze.
To reveal concealed information (e.g: answer to a quiz):
Press the /
button. Press again to conceal the information.
To select a sub page:
A teletext page may consist of several sub pages. In this case the page number that
appears on the upper left corner changes colour from yellow to green, and one or more
arrows will appear next to the page number. Repeatedly press the B or b buttons on
the remote control to watch the desired sub page.
To Switch Off Teletext:
Press button.
Fastext
The Fastext service lets you access pages with one button push.
While you are in Teletext mode and providing Fastext is broadcast, a colour coded menu
appears at the bottom of the teletext page. Press one of the coloured buttons (red,
green, yellow or blue) to access the corresponding page.
01gb29xl.fm Page 16 Tuesday, March 30, 2004 11:48 AM
Connecting additional equipment 17
Connecting Additional Equipment
GB
Using the following instructions you can connect a wide range of optional equipment to your TV set. (Connecting
cables are not supplied).
4 4
o4
4 4
o4
BCA
S VHS/Hi8/
DVC
camcorder
8mm/Hi8/
DVC
camcorder
When you connect the headphones,
the TV speakers will automatically be
muted.
To avoid picture distortion, do not connect external equipment to Scart connectors A and B at the same time.
Do not connect a Decoder to the Scart connector F.
Connecting a VCR:
To connect a VCR, please refer to the section Connecting the aerial and VCR of this instruction manual. We recommend
you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV programme
number 0 by using the Manual Programme Preset option. (for details of how to manually programme these presets, see
page 13, step a). Refer to your VCR instruction manual to find the output channel on your VCR.
Connecting a VCR that supports Smartlink:
Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please refer to the instruction
manual of your VCR.
If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart socket 3/ 3 G.
If you have connected a decoder to the Scart 3/ 3 G or through a VCR connected to this Scart:
Select the Manual Programme Preset option in the Set Up menu and after selecting the Decoder
** option, select On
(by using
the v or V button). Repeat this procedure for each scrambled signal.
** The availability of this option depends on the country you have selected in the Language/Country menu.
S
S
* “PlayStation” is a product of Sony
Computer Entertainment, Inc.
* “PlayStation is a trademark of Sony
Computer Entertainment, Inc.
F
G
Decoder
PlayStation*
DVD
D
Hi-Fi
Decoder
VCR
E
continued...
01gb29xl.fm Page 17 Tuesday, March 30, 2004 11:48 AM
18 Connecting additional equipment
Connecting Additional Equipment
Using optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture from the connected equipment, press the button repeatedly until the correct input symbol
appears on the screen.
Symbol
1
1
2
2
3
3
4
4
Input Signals
Audio / video input signal through the Scart connector E.
RGB input signal through the Scart connector E. This symbol appears only if a RGB source has
been connected.
Audio / video input signal through the Scart connector F.
RGB input signal through the Scart connector F. This symbol appears only if a RGB source has
been connected.
Audio/video input signal through the Scart connector G.
S Video Input signal through the Scart connector G. This symbol appears only if a S Video source
has been connected.
Video input signal through the phono socket B and Audio input signal through C.
S Video Input signal through the front S Video input jack A and Audio signal through C. This symbol
appears only if a S Video source has been connected.
4
Press button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or 4 input signal using the
instructions above. Finally, refer to the Sound Adjustment section of this manual and select Dual Sound A on the
sound menu screen.
S
S
S
~50°
Left Hi-Fi
speaker
Right Hi-Fi
speaker
Your sitting position
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets D if you wish to
amplify the audio output from your TV. Next, using the menu system,
select the Set Up menu. Enter the Detail Set Up menu and set TV
Speakers to Off.
The audio level of the external speakers can be modified by
pressing the volume buttons on the remote control. Also, treble and
bass settings can be modified through the Sound Adjustment
menu.
To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:
Place the speakers of your equipment in front of your sitting position
and besides the TV set, but keeping a distance of 50 cm from each
speaker to the TV set.
Then, using the menu system, select the menu Sound Adjustment,
and select Dolby Virtual on the Effect option.
01gb29xl.fm Page 18 Tuesday, March 30, 2004 11:48 AM
Connecting additional equipment 19
Remote Control Configuration for VCR/DVD
The remote control supplied with your TV automatically operates the basic functions of Sony
DVD players and most Sony VCRs. The remote control can also operate DVD players and
VCRs made by other manufacturers, provided that it is first programmed to match the
particular brand of your VCR or DVD player.
Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below.
On those brands that have more than one code, enter the first code number.
Sony will endeavour to update the software according tomarket changes. Therefore,
please refer to code table included with the remote control for the latest code set.
1 Press the Media Selector button repeatedly on the remote control until the required VCR
or DVD green light is lit.
Note: If the Media Selector button is switched to TV, the code numbers will not be stored.
2 With the green light illuminated, press and hold down the YELLOW button for
approximately 6 seconds until the green light starts to flash.
3 Use the numbered buttons to enter the three digit code for your brand. Once a correct code
has been entered, the green VCR, TV and DVD lights illuminate together momentarily.
4 Turn on your VCR or DVD player and check that the remote control operates the basic
functions. If not, repeat the above steps and enter the next three digit number for your
brand.
Your brand codes may be lost if weak batteries are not replaced within a few minutes. To
reset your brand DVD or VCR please repeat the above steps. A small label is added
insidethe battery door to allow youto record your brand codes.
Not all brands are covered and not all models of every brand may be covered.
VCR Brand List DVD Brand List
Brand Code Brand Code
SONY (VHS) 301, 302, 303, 308, 309 SONY 001
SONY (BETA) 303, 307, 310 AIWA 021
SONY (DV) 304, 305, 306 DENON 018, 027, 020, 002
AIWA 325, 331, 351 GRUNDIG 009, 028, 023, 024, 016, 003
AKAI 326, 329, 330 HITACHI 025, 026, 015, 004
DAEWOO 342, 343 JVC 006, 017
GRUNDIG 358, 355, 360, 361, 320, 351 KENWOOD 008
HITACHI 327, 333, 334 LG 015, 014
JVC 314, 315, 322, 344, 352, 353, 354, 348,
349
LOEWE 009, 028, 023, 024, 016, 003
MATSUI 013, 016
LG 332, 338 ONKYO 022
LOEWE 358, 355, 360, 361, 320, 351 PANASONIC 018, 027, 020, 002
MATSUI 356, 357 PHILIPS 009, 028, 023, 024, 016, 003
ORION 328 PIONEER 004
PANASONIC 321, 323 SAMSUNG 011, 014
PHILIPS 311, 312, 313, 316, 317, 318,358,359 SANYO 007
SHARP 019, 027
SAMSUNG 339, 340, 341, 345 THOMSON 012
SANYO 335, 336 TOSHIBA 003
SHARP 324 YAMAHA 018, 027, 020, 002
THOMSON 319, 350
TOSHIBA 337
2
1
3
01gb29xl.fm Page 19 Tuesday, March 30, 2004 11:48 AM
20 Additional Information
Specifications
GB
TV system Depending on your country selection B/G/H, D/K
Colour System PAL, SECAM, NTSC 3.58, 4.43 (Video In only)
Channel Coverage VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, R21-R69
Picture Tube Flat display FD Trinitron 29 (approx. 73cm measured diagonally)
Rear Terminals 1/ 1 21-pin Scart connector (CENELEC standard) including audio/video
input, RGB input, TV audio/video output
2/ 2 21-pin Scart connector (CENELEC standard) including audio/video
input, RGB input, monitor audio/video output
3/ 3 21-pin Scart connector (CENELEC standard) including audio/
(SMARTLINK) video input, S-video input, selectable audio/video output and Smartlink
interface
Audio outputs (Left/Right) - phono jacks
Front terminals 4 S Video input - 4 pin DIN
4 Video input - phono jack
4 Audio input - phono jacks
i Headphones jack
Sound Output 2 x 20W (Music Power), 2 x 10W (RMS)
Woofer: 30W (Music Power), 15W (RMS)
Power Consumption 130W
Standby Power
Consumption
0.3W
Dimensions (WxHxD) Approx. 771mm x 585mm x 506mm
Weight Approx. 48.5kg
Accessories Supplied 1 Remote Control (RM-934), 2 batteries (IEC designated)
Other Features 100Hz picture
Teletext, Fastext, TOPtext (250 page TEXT memory)
Sleep Timer
Smartlink (direct link between your TV set and a compatible VCR. For moreinformation
on Smartlink, please refer to the Instruction Manual of your VCR)
TV system Autodetection
Dolby Virtual
BBE
PIP
S
S
Design and specifications are subject to change without notice.
01gb29xl.fm Page 20 Tuesday, March 30, 2004 11:48 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124

Sony KV-29XL71K Návod na obsluhu

Kategória
Televízory LCD
Typ
Návod na obsluhu

V iných jazykoch