Sony KV-32FX66K Návod na obsluhu

R

FD Trinitron

Colour Television

KV-32FX66K

Instruction Manual

GB

Инструкции за експлоатация

BG

Návod k obsluze

Kezelési útmutató

Instrukcja obsługi

Инструкция пo эксплyатации

CZ

HU

PL

RU

4-088-952-42 (1)

Prohlášení o shodě

rádiového zařízení s ustanoveními Nařízení vlády č. 426/2000 Sb., kterým se stanoví technické

požadavky na rádiová a na telekomunikační koncová zařízení.

Dovozce: Sony Czech s.r.o.

Vinohradská 174, 130 00 Praha 3

IČO 49685864

tímto prohlašuje, že výrobek:

druh zařízení: barevný televizní přijímač s vyhledávací funkcí

typové označení: KV-32FX66K s dálkovým ovladačem RM-937

výrobní číslo:

(vyplní prodejce)

specifikace: TV přijímač a dálkový ovladač obsahující RF vysílací modul

výrobce:

Sony Manufacturing Co., Pencoed , Velká Británie - nebo alternativně

Sony Espana, Barcelona Plant, Barcelona, Španělsko

pásmo přeladitelnosti: není stanoveno

vf výkon třída 8, nižší než 10 mW ERP

pásmo pracovních

kmitočtů: 433,050 – 434,790 MHz, jmenovitě 434,049 MHz

kanálová rozteč: není stanovena

druh modulace: nosná bez modulace

účel použití: běžné použití v domácnosti či běžném kancelářském prostředí

splňuje požadavky Generální licence Českého telekomunikačního úřadu č. GL – 30/R/2000,

dále splňuje požadavky těchto norem a předpisů, příslušných pro daný druh zařízení:

rádiové parametry: ČSN EN 301489-1, ČSN EN 301489-3, ČSN EN 300220-3

EMC: ČSN EN 55013+A12+A14, ČSN EN 55020+A12+A13+A14, ČSN EN 61000-3-2,

ČSN EN 61000-3-3

elektrická bezpečnost: ČSN EN 60065

a že je bezpečný za podmínek použití uvedených v tomto Prohlášení a v Návodu k obsluze k

tomuto výrobku. Shoda byla posouzena v souladu s § 3, bod 1, písm. b), příloha 3, Nařízení

vlády č. 426/2000 Sb., kterým se stanoví technické požadavky na rádiová a na telekomunikační

koncová zařízení.

Prohlášení o shodě je vydáváno na základě těchto podkladů:

Zkušební protokol č. 20020946 vydaný akreditovanou laboratoří Sony Intl., PCE, Stuttgart,

Německo.

CB test certificate a report BEAB Ref:CTV 4722 vydaný BEAB Guilford, Velká Britanie.

EMC test report ID No.020401 vydaný Sony Corporation, EMC Lab, Pencoed, Velká Britanie.

Toto prohlášení je vydáno na výhradní odpovědnost dovozce.

V Praze dne 14.5.2002 ing.Vladimír Doležal v.r.

ředitel pro servis a techniku

www.compliance.sony.de

cz

3

GB

Introduction

Thank you for choosing this Sony FD Trinitron Colour Television.

Before operating the TV, please read this manual thoroughly and retain it for future

reference.

• Symbols used in the manual:

Table of Contents

Introduction..............................................................................................................................................3

Safety Information...................................................................................................................................4

Overview

Overview of Remote Control Buttons .................................................................................................. 5

Overview of TV Buttons ........................................................................................................................ 6

Installation

Inserting Batteries into the Remote Control ........................................................................................6

Connecting the Aerial and VCR ........................................................................................................... 6

First Time Operation

Switching On the TV and Automatically Tuning .............................................................................. 7

Menu system

Introducing and Using the Menu System.......................................................................................... 10

Menu Guide:

Picture Adjustment ........................................................................................................................... 10

Sound Adjustment............................................................................................................................. 11

Sleep Timer......................................................................................................................................... 12

Auto Format ....................................................................................................................................... 12

AV3 Output ........................................................................................................................................ 13

PIP Input ............................................................................................................................................. 13

PIP Position ........................................................................................................................................14

Language ............................................................................................................................................14

Auto Tuning ....................................................................................................................................... 14

Programme Sorting ........................................................................................................................... 15

Programme Labels............................................................................................................................. 15

AV Preset ............................................................................................................................................ 15

Manual Programme Preset............................................................................................................... 16

Picture Rotation .................................................................................................................................17

RGB Centring ..................................................................................................................................... 17

Remote Control ID ............................................................................................................................17

Teletext...............................................................................................................................................18

NexTView.......................................................................................................................................... 19

Additional Information

Connecting Optional Equipment ........................................................................................................ 21

Using Optional Equipment .................................................................................................................. 22

Remote Control Configuration for VCR/DVD................................................................................. 23

Specifications.......................................................................................................................................... 24

Troubleshooting..................................................................................................................................... 25

Table of Contents

• Important information

• Information on a feature.

•1,2... Sequence of instructions.

• Shaded buttons on the remote control show

you the buttons you have to press to follow

the sequence of the instructions.

• Informs you of the result of instructions.

OK

4

Safety Information

Do not open the cabinet and the rear

cover of the TV. Refer to qualiﬁed

service personnel only.

To prevent ﬁre or shock

hazard, do not expose the TV

to rain or moisture.

For your own safety, do not touch

any part of the TV, power lead or

aerial lead during lightning

storms.

Do not cover the ventilation

openings of the TV For

ventilation, leave a space of at

least 10cm all around the set.

Never place the TV in hot, humid

or excessively dusty places. Do

not install the TV where it may be

exposed to mechanical vibrations.

To prevent ﬁre, keep inﬂammable

objects or naked lights (eg

candles) away from the TV.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to

climb on to it. Do not place the TV

on its side or face up.

Do not cover the ventilation

openings of the TV with items

such as curtains or newspapers

etc.

Safety Information

Never push objects of any kind into

the set as this could result in a ﬁre

or electric shock. Never spill liquid

of any kind on the set. If any liquid

or solid object does fall into the

cabinet, do not operate the TV.

Have it checked immediately by

qualiﬁed personnel.

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

mode when not in use. Disconnect

from the mains.

This set is to operate on a 220-

240V AC supply only. Take care

not to connect too many

appliances to the same power

socket as this could result in ﬁre

or electric shock.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped

or damaged, have it checked

immediately by qualiﬁed service

personnel.

Clean the screen and cabinet with a

soft, lightly dampened cloth. Do

not use any type of abrasive pad,

alkaline cleaner, scouring powder

or solvent, such as alcohol or

benzine, or antistatic spray. As a

safety precaution, unplug the TV

before cleaning it.

5

GB

1 To Temporarily Switch Off TV:

Press this button to temporarily switch off TV (the standby indicator on

the TV lights up). Press again to switch on TV from standby mode.

To save energy we recommend switching off completely when TV is not in use.

After 15 minutes without a signal and without any button being

pressed, the TV switches automatically into standby mode.

2 VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.

3 Media Selector:

With this remote control you can operate not only this TV but also the main

functions of your VCR or DVD. Switch on the device you want to operate and

next press this button repeatedly to select the VCR, TV or DVD. A green

light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this

remote control, you have to set it up depending on the brand of the

device to be used. For more details, refer to chapter “Remote Control

Configuration for VCR or DVD” on page 23.

4 Selecting input source: Press this button repeatedly until the desired

input symbol of the source appears on the TV screen.

5 Selecting channels:

If Media Selector is switched to TV or VCR, press this button to select

channels.

For double-digit programme numbers, enter the second digit within 2.5

seconds.

6 a) If Media Selector is switched to TV:

Press this button to watch the last channel selected (the last channel

watched for at least 5 seconds).

b) If Media Selector is switched to VCR:

For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- -

first and then the buttons 2 and 3.

Overview of Remote Control Buttons

Overview

Besides TV functions, all coloured buttons as well as green symbols are also used for

Teletext operation. For more details, please refer to “Teletext” section on page 18.

1

!¢

!™

!£

!¡

2

3

4

5

6

7

8

9

!º

!∞

!§

@£

@™

@¡

@º

!ª

!•

!¶

7 Selecting screen format: Press this button

repeatedly to change the format of the screen. For

more details refer to chapter “Auto Format” on

page 12.

8 This button only works in Teletext mode.

9 Selecting Teletext: Press this button to switch

on teletext.

!º Joystick:

a) If Media Selector is switched to TV:

• When MENU is switched on, use these buttons

to operate the menu system. For details refer to

“Introducing and Using the Menu System” on

page 10.

• When MENU is switched off, press OK to

show a channel overview. Then press or

to select the channel and then press again

the OK button to watch the selected channel.

b)If Media Selector is switched to VCR or

DVD:

Using these buttons you can control the main

functions of your VCR or DVD.

!¡ Displaying the menu system: Press this

button to display the menu on the TV screen.

Press again to remove the menu display from the

TV screen.

!™ Selecting channels: Press these buttons to

select the next or previous broadcast channel.

!£ NexTView: For more details refer to chapter

“NexTView” on page 19.

!¢ Adjusting TV volume: Press these buttons to

adjust the volume of the TV.

!∞ Recording button: If Media Selector is

switched to VCR, press this button to record

programmes.

!§ Selecting TV mode: Press this button to switch

off PIP, teletext or video input.

!¶ Selecting Picture mode: Press this button

repeatedly to change the picture mode.

!• Selecting Sound effect: Press this button

repeatedly to change the sound effect.

!ª Displaying on Screen information: Press

this button to display all on-screen indications.

Press again to cancel.

@º

Freezing the picture: Press this button to

freeze the picture. The screen is divided into two

screens. On the left with the normal picture, on

the right the picture is freezed. Press this button

again to return to the normal picture.

@¡

Swapping screens: Whilst you are in “PIP”

mode, press this button to swap the two screens.

@™

PIP (Picture in Picture): Press this button to

watch another source in a small picture (PIP)

within the main TV picture. Press again to cancel.

To select the source you want to watch, refer to

the chapter “PIP Input” on page 13.

@£ Muting the Sound: Press this button to mute

TV sound. Press again to restore the sound.

6

Overview of TV Buttons

Inserting Batteries into the Remote Control

Make sure you insert the supplied batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial and VCR

Overview-Installation

Connecting cables are not supplied.

Remote Control

Locator:

By pressing this

button on the TV, the

remote control beeps

for 30 seconds to

enable you to find it

easily.

To stop beeping, press

any button on the

remote control.

Programme Up or

Down Buttons (Selects

TV channels)

Selecting

Input

source

Audio

Input jacks

Volume control

buttons

Auto Start Up Button

Headphones

jack

Video

Input jack

S video Input jack

Press on the

mark .

Standby

indicator

On/Off

switch

or

Scart lead is optional.

For more details of VCR connection, please refer to the section

“Connecting Optional Equipment” of this instruction manual.

VCR

OUT IN

7

GB

continued...

Language

English

Norge

Français

Italiano

Nederlans

Select Language: Confirm: OK

Country

Sverige

Norge

-

Italia

Schweiz/Suisse/Svizzera

Select Language: Confirm: OK

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV

enabling you to: 1) choose the language of the menu screen, 2) choose the country in which

you wish to operate the TV, 3) adjust the picture slant, 4) asign an ID to your remote control,

5) search and store all available channels (TV Broadcast) and 6) change the order in which

the channels (TV Broadcast) appear on the screen.

However, if you need to change any of these settings at a later date, you can do that by

selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up

Button on the TV set.

First Time Operation

1 Connect the TV plug to the mains socket (220-240V AC,

50Hz)

The first time that the TV set is connected, it is usually

turned on. If the TV is off, press the on/off button on

the TV set to turn on the TV.

The first time you switch on the TV, a Language menu

displays automatically on the TV screen.

2 Press the or button on the remote control to select

the language, then press the OK button to confirm your

selection. From now on all the menus will appear in the

selected language.

3 The Country menu appears automatically on the TV

screen. Press the or button to select the country in

which you will operate the TV set, then press the OK

button to confirm your selection.

• If the country in which you want to use the TV set

does not appear in the list, select “-” instead of a

country.

• In order to avoid wrong teletext characters for

Cyrillic languages we recommend to select Russia

country in the case that your own country does not

appear in the list.

8

Programme:

Channel:

System

Searching...

1

C 01

B/G

Auto Tuning

Do you want to start

automatic tuning?

Yes

No

No channel found

Please connect aerial

Confirm

First Time Operation

4 Because of the earth’s magnetism, the picture might slant.

The Picture Rotation menu allows you to correct the

picture slant if it is necessary.

a) If it is not necessary, press OK to select Not necessary.

b) If it is necessary, press or to select Adjust now,

then press OK and correct any slant of the picture

between –5 and +5 by pressing or . Finally press

OK to store.

5 You can assign an ID (number) to your Remote Control to

avoid interference from other locators when you press the

Remote Control Locator button on the TV set.

a) If you do not want to configure it, press OK to select

No.

b) If you want to configure it press to select Yes. Press

OK. Next press one of the number buttons (0-9) and

press OK to store.

The remote control beeps. Press OK to stop

beeping.

ID should be assigned anytime the batteries of the

remote control will be replaced.

Finally press OK to continue the process.

6 The Auto Tuning menu appears on the screen. Press the

OK button to select Yes.

7The TV starts to automatically search and store all

available broadcast channels for you.

This procedure could take some minutes. Please be

patient and do not press any buttons, otherwise

automatic tuning will not be completed.

In some countries the TV Broadcaster installs the

channels automatically (ACI system). In this case,

the TV Broadcaster sends a menu in which you can

select your city by pressing the or button and

OK to store the channels.

If no channels were found during the auto tuning

process then a new menu appears automatically on

the screen asking you to connect the aerial. Please

connect the aerial (see page 6) and press OK. The

auto tuning process will start again.

Do you want to configure your

Remote Control ID?

Yes

No

Select: Confirm: OK

Remote Control ID

Introduce New ID

with number buttons:

-

Enter: 0-9 Confirm: OK

Remote Control ID

New ID is: 5

Now beeping, please

press any button to stop.

Confirm: OK

Remote Control ID

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

Select: Confirm: OK

continued...

9

GB

First Time Operation

Your TV is now ready for use

8 After all available channels are captured and stored,

the Programme Sorting menu automatically appears

on the screen enabling you to change the order in

which the channels appear on the screen.

a) If you wish to keep the broadcast channels in the

tuned order, go to step 9.

b) If you wish to store the channels in a different order:

1 Press the or button to select the programme

number with the channel (TV Broadcast) you wish

to rearrange, then press the button.

2 Press the or button to select the new

programme number position for your selected

channel (TV Broadcast), then press OK.

3 Repeat steps b)1 and b)2 if you wish to change

the order of the other channels.

9 Press the MENU button to remove the menu from the

screen.

Programme Sorting

Programme:

01 TVE2 41 TVE

02 TVE

03 ANT3

04 TELE5

05 C+

06 C44

Select new position Move: OK

Programme Sorting

Programme:

01 TVE2

02 TVE

03 ANT3

04 TELE5

05 C+

06 C44

Select Channel Confirm:

10

Introducing and Using the Menu System

Your TV uses an on-screen menu system to guide you through the operations. Use the

following buttons on the Remote Control to operate the menu system:

1 Press the MENU button to switch the first level menu on.

Menu System

2 • To highlight the desired menu or option, press or .

• To enter the selected menu or option, press .

• To return to the last menu or option, press .

• To alter the settings of your selected option, press //or.

• To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

continued...

Menu Guide

PICTURE ADJUSTMENT

The “Picture Adjustment” menu allows you to

alter the picture adjustments.

To do this: after selecting the item you want to

alter press , then press repeatedly / /

or to adjust it and finally press OK to

store the new adjustment.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

• This menu also allows you to customise the picture mode based on the programme you are watching:

Picture Mode Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).

Personal (for individual settings).

Movie (for films).

• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.

• Hue is only available for NTSC colour signal (e.g: USA video tapes).

• Select Reset and press OK to reset the picture to the factory preset levels.

• The Noise Reduction option is set to AUTO to automatically reduce the picture noise visible in the

broadcast signal. To cancel this function, select “Off” instead of “AUTO”.

11

GB

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Sound Adjustment

Select: Enter Menu:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

Sound Adjustment

Select: Enter:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

Menu System

SOUND ADJUSTMENT

The “Sound Adjustment” menu allows you to

alter the sound adjustments.

To do this: after selecting the item you want to

alter, press . Then press repeatedly /

/ or to adjust it and finally press OK

to store the new adjustment.

Level 1 Level 2 Level 3 / Function

Effect Natural: Enhances clarity, detail and presence of sound by using

“BBE High Definition Sound system”*.

Dynamic: “BBE High Definition Sound system”* intensifies clarity

and presence of sound for better intelligibility

and musical realism.

Dolby

**V: Dolby Virtual, simulates the sound effect of “Dolby

Surround Pro Logic”.

Off: Flat response.

Treble Less More

Bass Less More

Balance Left Right

Reset Resets the sound to the factory preset levels.

Dual Sound • For a stereo broadcast:

Mono.

Stereo.

• For a bilingual broadcast:

Mono (for mono channel if available).

A (for channel 1).

B (for channel 2).

Auto Volume Off: volume level changes according to the broadcast signal.

On: volume level of the channels will stay the same, independent of

the broadcast signal (e.g. in the case of advertisements).

TV Speakers On: to listen to the TV from the set speakers.

Off: to listen to the TV from an external amplifier connected to the

audio outputs on the rear of the TV set.

• If you are listening to the TV through headphones, the “Effect” option will automatically be switched

to “Off”.

• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be

switched to “Off” and vice versa.

* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license

from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word

“BBE” and BBE Symbol are trademarks of BBE Sound, Inc.

**This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound

of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.

The sound effect can also be improved by connecting a suitable external amplifier (for details refer

to “Connecting to external audio Equipment” on page 22).

**Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D

symbol are trademarks of Dolby Laboratories.

K

continued...

12

Menu System

SLEEP TIMER

The “Sleep Timer” option in the “Features”

menu allows you to select a time period for the

TV to switch itself automatically into the

standby mode.

To do this: after selecting the option press ,

then press or to set the time period delay

(max. of 4 hours).

• While watching the TV, you can press the button on the remote control to display the time

remaining.

• One minute before the TV switches itself into standby mode, the time remaining is displayed on the TV

screen automatically.

AUTO FORMAT

The “Auto Format” option in the “Features”

menu allows you to automatically change the

aspect ratio of the screen.

To do this: after selecting the option, press .

Then press or to select On (if you wish

the TV set to automatically switch the screen

format according to the broadcast signal) or Off

(if you wish to keep your preference). Finally

press OK to store.

Even if you have selected “On” or “Off” in the “Auto Format” option,

you can always modify the format of the screen by pressing

repeatedly on the remote control to select one of the following formats:

Smart: Imitation of wide screen effect for 4:3 broadcast.

4:3: Conventional 4:3 picture size, full picture information.

14:9: Compromise between 4:3 and 16:9 picture size.

Zoom: Widescreen format for letterbox movies.

Wide: For 16:9 broadcast. Full picture information.

In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of

the screen are cut off. Press or to adjust the position of the

image on the screen (e.g. to read subtitles).

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

On

AUTO

AV1

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter:

Off

On

AUTO

AV1

continued...

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

On

AUTO

AV1

Select: Enter:

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Off

On

AUTO

AV1

4:3

Zoom

14:9

Wide

Smart

13

GB

AV3 OUTPUT

The “AV3 Output” option in the “Features”

menu allows you to select the source to be

output from the Scart connector 3/ 3 so

that you can record from this Scart any signal

coming from the TV or from an external

equipment connected to the Scart connectors

1/ 1 or 2/ 2 or side connectors

4 or 4 and 4.

If your VCR supports Smartlink, this

procedure is not necessary.

To do this: after selecting the option, press .

Then press or to select the desired

output signal: TV, AV1, AV2, AV4, YC4 or

AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on

the screen.

If you have connected a decoder to the Scart 3/ 3 or to a VCR connected to this

Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct

unscrambling.

PIP INPUT

The “PIP Input” option in the “Features” menu

allows you to select the source you want to

watch in the “PIP” screen.

To do this: after selecting the option, press .

Then press repeatedly or to select the

desired source AV1, AV2, AV3, AV4 or TV.

Finally press OK to store.

S

Menu System

Level 1 Level 2 Level 3 / Function

continued...

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

On

AUTO

AV1

Select: Enter:

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Off

On

AUTO

AV1

B

A

BB

B

A

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

On

AUTO

AV1

Select: Enter:

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Off

On

AUTO

AV1

To watch the “PIP” screen with the selected

source, press the button on the remote control.

You can swap the screens by pressing the

button on the remote control.

14

Menu System

continued...

PIP POSITION

The “PIP Position” option in the “Features”

menu allows you to change the position of the

“PIP” screen within the main screen.

To do this: after selecting the option press ,

, or to select the desired position.

Finally press OK to store.

LANGUAGE/COUNTRY

The “Language/Country” option in the “Set

Up” menu allows you to select the language

that the menus are displayed in. It also allows

you to select the country in which you wish to

operate the TV set.

To do this: after selecting the option, press

and then proceed in the same way as in steps 2

and 3 of the section “Switching On the TV and

Automatically Tuning” on page 7.

AUTO TUNING

The “Auto Tuning” option in the “Set Up”

menu allows you to automatically search for

and store all available TV channels.

To do this: after selecting the option, press

and then proceed in the same way as in the

steps 6 and 7 of the section “Switching On the

TV and Automatically Tuning” on page 8.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

On

AUTO

AV1

Select: Enter:

Features

Sleep Timer

Auto Format

AV3 Output

PIP Input

PIP Position

Off

On

AUTO

AV1

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Start Auto Tuning:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

15

GB

Menu System

continued...

PROGRAMME SORTING

The “Programme Sorting” option in the “Set

Up” menu allows you to change the order in

which the channels (TV Broadcast) appear on

the screen.

To do this: after selecting the option, press

and then proceed in the same way as in step 7 b)

of the section “Switching On the TV and

Automatically Tuning” on page 9.

PROGRAMME LABELS

The “Programme Labels” option in the “Set

Up” menu allows you to name a channel using

up to five characters (letters or numbers).

To do this:

1 After selecting the option, press , then

press or to select the programme

number with the channel you wish to name.

2 Press . With the first element of the Label

column highlighted, press or to select

a letter or number (select “-“ for a blank), then

press to confirm this character. Select the

other four characters in the same way. Finally

press OK to store.

AV PRESET

The “AV Preset” option in the “Set Up” menu

allows you to designate a name to the external

equipment you have connected to the input

sockets of this TV.

To do this:

1 After selecting the option, press , then

press or to select the input source you

wish to name (AV1, AV2 and AV3 are for the

rear Scarts and AV4 for side connectors).

Then press .

2 A label automatically appears in the label

column:

a) If you want to use one of the 6 predefined

label (CABLE, GAME, CAM, DVD,

VIDEO or SAT), press or to select

the desired label and finally press OK to

store.

b) If you want to set a different label, select

Edit and press . Then with the first

element highlighted, press or to

select a letter, number or “-“ for a blank,

then press to confirm this character.

Select the other four characters in the same

way and finally press OK to store.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

16

Menu System

continued...

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the

“Set Up” menu allows you to:

a) Preset channels or the VCR channel one by

one to the programme order of your choice.

To do this:

1 After selecting the ”Manual Programme

Preset” option, press then with

Programme option highlighted press .

Press or to select which programme

number you want to preset the channel on

(for VCR, select programme number “0”).

Then press .

2 The following option is only available depending on the country you have selected

in the “Language/Country” menu.

After selecting the System option, press .

Then press or to select the TV Broadcast system (B/G for western European

countries or D/K for eastern European countries). Then press .

3 After selecting the Channel option, press . Then press the number buttons to enter

directly the channel number of the TV Broadcast or the channel of the VCR signal. If you

do not know the channel number, press or to search for it. When you tune the

desired channel, press OK twice to store.

Repeat all the above steps to tune and store more channels.

b) Label a channel using up to five characters.

To do this: Highlighting the Programme option, press the PROG +/- button to select the

programme number with the channel you wish to name. When the programme you want to

name appears on the screen, select the Label option and press . Next press or to

select a letter, number or “-“ for a blank. Press to confirm this character. Select the other

four characters in the same way. After selecting all the characters, press OK twice to store.

c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the

best possible picture, however you can manually fine tune the TV to obtain a better picture

reception in case the picture is distorted.

To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT

option and press . Next press or to adjust the fine tuning between -15 and +15.

Finally press OK twice to store.

d) Skip any unwanted programme numbers when they are selected with the PROG +/-

buttons.

To do this: Highlighting the Programme option, press the PROG +/- button to select the

programme number you want to skip. When the programme you want to skip

appears on the screen, select the Skip option and press . Next press or to select

Yes. Finally press OK twice to confirm and store.

To cancel this function afterwards, select “No” instead of “Yes” in the step above.

e) View and record scrambled channels when using a decoder connected to Scart

3/ 3 directly or through a VCR.

This option is only available depending on the country you have selected in the

“Language/Country” menu.

To do this: select the Decoder option and press . Next press or to select On. Finally

press OK twice to confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

S

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

17

GB

Menu System

PICTURE ROTATION

Because of the earth’s magnetism, the picture

might slant. If this is the case, you can correct

the pictures slant by using the “Picture

Rotation” option in the “Detail Set Up” menu.

To do this: after selecting the option, press .

Then press or to correct any slant of the

picture between -5 and +5.

RGB CENTRING

When connecting an RGB source, such as a

“PlayStation”, you may need to readjust the

horizontal position of the picture. If this is the

case, you can adjust it through the “RGB

Centring” option in the “Detail Set Up”.

To do this: while watching an RGB source select

the “RGB Centring” option and press . Then

press or to adjust the centre of the

picture between –10 and +10. Finally press OK

to confirm and store.

REMOTE CONTROL ID

The “Remote Control ID” option in the “Detail

Set Up” menu allows you to assign an ID to this

TV remote control to avoid interference from

other locators when you press the Remote

Control button on the TV set.

To do this: after selecting the option, press

and then proceed in the same way as in the step

5 of the section “Switching On the TV and

Automaticall Tuning” on page 8.

ID should be assigned anytime the

batteries of the remote control will be

replaced.

Level 1 Level 2 Level 3 / Function

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Enter:

Detail Set Up

Select:

Picture Rotation

RGB Centring

Remote Control ID

0

5

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Enter:

Detail Set Up

Select:

Picture Rotation

RGB Centring

Remote Control ID

0

5

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Enter:

Detail Set Up

Select:

Picture Rotation

RGB Centring

Remote Control ID

0

5

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

18

Teletext

Teletext is an information service transmitted by most TV stations. The index page of the

teletext service (usually page 100) gives you information on how to use the service. To

operate teletext, use the remote control buttons as indicated below.

Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.

To switch on Teletext :

After selecting the TV channel which carries the teletext service you wish

to view, press .

To select a Teletext page:

Input 3 digits for the page number, using the numbered buttons.

• If you make a mistake, retype the correct page number.

• If the counter on the screen continues searching, it is because the page is not available. If this is the

case, input another page number

To access the next or preceding page:

Press PROG + ( ) or PROG - ().

To superimpose teletext on to the TV:

Whilst you are viewing teletext, press . Press it again to cancel teletext mode.

To freeze a teletext page:

Press / . Press it again to cancel the freeze.

To reveal concealed information (e.g: answer to a quiz):

Press / . Press it again to conceal the information.

To select a sub page:

A teletext page may consist of several sub pages. In this case the page number that appears

on the upper left corner will change from white to green and one or more arrows will appear

next to the page number. Repeatedly press the or buttons on the remote control to

watch the desired sub page.

To Switch Off Teletext:

Press .

Fastext

Fastext service lets you access Teletext pages with one button push.

When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at

the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow

or blue) to access the page corresponding to your menu choice.

Teletext

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

19

GB

NexTView*

*(depending on availability of service).

NexTView is an on-screen electronic programme guide, providing you with programme

information for different broadcasters.

When looking for information you can search by theme (sports, art, etc...) or date.

If wrong characters appear when viewing NexTView, use the menu system to enter the

“Language/Country” menu (see page 14) and select the same language as the NexTView

is broadcasted.

Displaying NexTView

1 Select a broadcast channel providing a NexTView service. In this case the indication

“NexTView” is displayed as soon as data is available.

2 To see NexTView service you have two different types of NexTView interface. These depend

on the % of available data:

a) “Programme List” interface:

Whilst you are watching TV, and after the indication “NexTView” (coloured white)

is displayed on the screen, press the button on the remote control to watch the

“Programme List” interface (see fig. 1).

b) “Overview” interface:

Whilst you are watching TV, and after more than 50% of NexTView data is available

(100% data may not be available depending on the area) the indication “NexTView”

(coloured black) is displayed on the screen. Press the button on the remote

control to watch the “Overview” interface (see fig. 2).

As soon as you enter the NexTView service the % of NexTView data available will be

shown in the bottom left corner of the screen. Once you have entered the service, the %

of data will not increase.

3 To navigate through NexTView:

• moving right or left press or .

• moving upwards or downwards, press or .

• to confirm a selection, press OK.

4 To switch NexTView off, press the button on the remote control.

“Programme List” interface (fig. 1):

Icons for different themes

(see the “Icons’ key” section

on the next page)

Date

Programme list

*”Record” and “Remind” options will be shown on the screen as soon as a programme has

been selected, but they will not be shown if you are watching a TV channel which is not

a NexTView provider.

*”Record” and “Remind” will not be available if the programme that you have selected has

already started.

NexTView

01

Mon

TV1

TV2

TV3

TV4

TV5

TV6

TV7

TV8

00 : 30

01 : 30

05 : 30

06 : 30

07 : 30

08 : 30

09 : 30

10 : 30

Songs from the shows

Weather forecast informati

A1 news magazine

Arts show

Oclock news

Weather forecast informati

A1 news magazine

Arts show

02

Tue

03

Wed

04

Thu

05

Fri

06

Sat

07

Sun 7 : 07 : 01

Songs from the shows

TV1 00:30 - 01:30 Thursday 04

Programme description

Record Remind

Record*:

This function only works if you have

connected a VCR which supports SmartLink

and Timer Programming feature.

If you wish to record the selected programme,

press the red button on the remote control.

Remind*:

If you wish to be reminded when the selected

programme is broadcast, press the green

button on the remote control. At the time that

the programme should be broadcast a

reminder message is displayed on the TV.

continued...

20

01

Mon

TV1

TV2

TV3

TV4

TV5

TV6

TV7

TV8

02

Tue

03

Wed

04

Thu

05

Fri

06

Sat

07

Sun 9 : 15 : 0 3

9 : 00 9 : 30 10 : 00

Magazine

|

Songs from the shows

Weather Forecast

|

Mike's show

Euronews

|

Fantasy film

|

Star Wars

Home Shopping Europe

|

Euro Sports

News | Arts show

|

Magazine

Larry King's live |

Euro Sports

Euro magazine |

Euro Sports

Home Shopping Europe |

Euronews

Songs from the shows

TV1 00:30 - 01:30 Thursday 04

Programme description

Record Remind

“Overview” interface (fig. 2):

Icons for different themes

(see the “Icons’ key” section

below)

Date

Overview

*”Record” and “Remind” options will be shown on the screen as soon as a programme has

been selected, but they will not be shown if you are watching a TV channel which is not

a NexTView provider.

*”Record” and “Remind” will not be available if the programme that you have selected has

already started.

Icons’ key:

NexTView

full selection list:

All the programme information is

listed by time and broadcast channel

order.

entertainment

children

arts

sports

news

movies

music

channel selection:

If the NexTView provider sends

information of more than 8

broadcast channels, you can select 8

of them to create your personal list.

After you have created your

personal list, the default list can be

restored. To restore it, select

“Auto

(

” by pressing button on

the remote control.

remind list:

Shows you the list with all the

programmes (maximum 5

programmes) that you have selected

to be reminded about.

Record*:

This function only works if you

have connected a VCR which

supports SmartLink and Timer

Programming feature.

If you wish to record the selected

programme, press the red button

on the remote control.

Remind

*:

If you wish to be reminded when the

selected programme is broadcast,

press the green button on the remote

control. At the time that the

programme should be broadcast a

reminder message is displayed on the

TV.

Stránka sa načítava ...

Sony KV-32FX66K Návod na obsluhu

Sony KV-32FX66K Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty