2. Počítačov
  3. Audio
  4. Rádiá
  5. Sencor
  6. SRD 6600
SRD 6600

Sencor SRD 6600 Používateľská príručka

  • Prečítal som si používateľskú príručku pre Sencor SRD 6600 DAB+ prenosné rádio. Som pripravený odpovedať na vaše otázky ohľadom jeho funkcií, nastavení a riešenia problémov. Príručka zahŕňa informácie o DAB+ a FM príjme, ukladaní staníc, nastavení hodiniek a ďalších dôležitých funkciách.
  • Ako nastavím hodiny na rádiu?
    Ako dlho vydrží batéria?
    Čo robiť, ak je príjem DAB/FM slabý?
    Ako môžem pripojiť externé zariadenie?
PORTABLE DAB RADIO
SENCOR SRD 6600 DAB+
USER’S MANUAL
EN
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:37
SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:37
EN 1
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Safety information
1. Safety information
IMPORTANT SAFETY INSTRUCTIONS
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1. READ INSTRUCTIONS – All the safety and operating instructions should be read
before the product is operated.
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS – All warnings on the product and in the operating instructions
should be adhered to.
4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.
5. WATER AND MOISTURE – Do not use this product near water – for example, near
abath tub, wash bowl, kitchen sink, or laundry tub; in awet basement; or near
aswimming pool; and the like. This appliance shall not be exposed to dripping or
splashing water and no object filled with liquids such as vases shall be placed on
the apparatus.
6. CLEANING – Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use adamp cloth for cleaning.
7. VENTILATION – Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on abed, sofa, rug or other similar surface. This
product should not be placed in abuilt-in installation, such as abookcase or rack,
unless proper ventilation is provided or the manufacturer*instructions have been
adhered to.
8. ACCESSORIES – Only use attachments/accessories specified by manufacturer.
9. POWER SOURCES – This product should be operated from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from built-in battery power, please refer to the
operating instructions.
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:37
2 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Safety information
10. NON-USE PERIODS – The power cord of the product should be unplugged from
the outlet and slide the power switch to OFF position when left unused for long
periods of time.
11. OBJECT AND LIQUID ENTRY – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in afire or electric shock. Never spill liquid of any kind on the
product.
12. HEAT – The product should be situated away from heat sources such as radiators,
heat registers, stoves or other products (including amplifiers) that produce heat.
13. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
14. SERVICING – Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
15. Apparatus shall not be exposed to dripping or splashing.
16. Where the plug of the Direct plug-in adaptor is used as disconnect device, the
disconnect device shall remain readily operable.
17. WARNING: Do not open. No user replaceable parts inside, refer servicing to
qualified technician.
18. WARNING: Never lubricate any part of this unit.
19. WARNING: Place this unit on aflat, hard and stable surface.
20. WARNING: Never place this unit on other electrical equipment.
21. WARNING: Keep this unit away from direct sunlight, naked flames or heat.
SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:37
EN 3
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Controls & Connections
2. Controls & Connections
1. TUNE + /- button
2. MENU button
3. ST.MO/ SELECT button
4. STANDBY button
5. LCD Display
6. FUNCTION button
7. PRESET button
8. INFO button
9. SCAN button
10. SLEEP button
11. VOLUME knob
12. HANDLE
13. DC input socket
14. Power ON/OFF switch
15. AUX in jack
SRD 6600 DAB 12j.indb 3 09.09.2016 14:17:38
4 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3. Getting Started
3.1. DAB/FM antenna
Before using your radio for DAB or FM reception, full extend the telescopic antenna
which located at the back of unit.
You may need to adjust the position of the telescopic antenna for maxing signal
strength.
For the first time to start to use this radio, the unit will perform DAB full scanning.
3.2. Connect Power
You can use this radio player on AC power or built-in type battery power.
Battery Life (Approx. hours) 4-5 hours depends on volume level.
Caution:
Risk of product damage! Make sure that the power supply voltage corresponds to the
voltage printed on the back or the underside of the product.
• Risk of electric shock! When you unplug the AC adapter, always pull the plug from
the socket. Never pull the cord.
• Use only the AC adaptor specified by the manufacturer or sold with this unit.
3.3. Setting the clock
The clock on your radio is automatically set when first used from the time signal
broadcast with DAB radio stations.
If aDAB station is not available, the clock may be set manually via the MENU system.
(Please refer to CLOCK SET page).
• Clock display will keep running if connected to AC power.
• In order to save battery life, there were no Clock displayed during Standby mode if
operated with DC battery.
3.4. Backlight
Adjust backlight only operate in AC power.
During Standby mode, press and hold MENU button in 3 secs then press TUNE +/- to
adjust the backlight level (Min. 0-10 Max.).
3.5. Power control
3.5.1. Using AC power
Connect the power adaptor to the DC 5V socket on the unit.
• Slide the power switch to “ON” position then press the STANDBY button in 2 secs.
• The display will light up and the unit will switch on.
SRD 6600 DAB 12j.indb 4 09.09.2016 14:17:38
EN 5
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
To turn the unit in STANDBY mode:
• Press the STANDBY button. The clock will continue to run whilst mains power is
connected.
3.5.2. Using battery power
Charging the battery
• Slide the power switch to “OFF” position.
• Connect the power adaptor to the DC 5V socket on the unit, than the wall power
socket.
• Slide the power switch to “ON” position
• Display will light up and battery charging indicator show on display.
• Slide the power switch to “ON” position then press the STANDBY button.
• The display will light and the unit will switch on.
To turn the unit in STANDBY mode:
• Press the STANDBY button and the display will be switch off completely.
Note:
The clock will not continue to run when using DC power.
Battery power indication will be appear on LCD display.
ENERGY SAVING/ ERP2 REGULATION
This device is equipped with an AUTOMATIC SWITCH OFF / STANDBY
SYSTEM for energy-saving requirements. This is regulated by an
EU-standard and is NOT AMALFUNCTION.
3.6. Adjust the volume
To adjust the volume from the front panel controls:
Turn the VOLUME knob to increase or decrease the volume level.
3.7. Clock setup
SET TIME/DATE: This main option enables the clock to be set manually if these is no
available DAB transmission.
To set the time and data manually:
1. In DAB or FM mode, press MENU button to access DAB / FM MENU.
Battery level
indicator
SRD 6600 DAB 12j.indb 5 09.09.2016 14:17:38
6 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
2. Press TUNE +/- to scroll the menu options.
3. To select an option, press SELECT [Main menu] button -> SYSTEM [Clock Setup]
4. Set the Clock setup to Manual (Defaulted at Radio).
5. To select an option, press SELECT button.
6. Repeat steps 2-5 if any sub-option is available under an option.
3.8. Listen to DAB radio
1. Press FUNCTION button repeatedly to select DAB radio.
[Tuning...] is displayed.
2. Press SCAN button to start full scan.
The unit stores all the DAB radio stations automatically and then broadcasts the
first available station.
3. The station list is memorized in the unit. Next time when you turn on the unit, the
station scan does not take place.
4. If no DAB station is found, [Not available] appears on display.
To tune to astation from the available station list:
– In DAB mode, press TUNE+/- to navigate through the available DAB stations.
3.8.1. Store DAB radio stations automatically
Note:
New stations and services will be added in the DAB broadcast. To make new DAB
stations and services available, preform full scan regularly.
– In DAB mode, press SCAN button, the unit scans all the available DAB radio
stations and stored.
3.8.2. Select apreset DAB radio station
– In DAB mode, to select any preset number; press PRESET.
– Press TUNE +/- repeatedly then press SELECT to select the preset station.
3.8.3. Store DAB radio stations manually
Note:
You can store amaximum of 10 preset DAB radio stations.
1. Tune to aDAB radio station.
2. Press and hold PRESET button in 3 secs, then press
TUNE +/- to select apreset number. Display show P1
and briefly.
3. Press SELECT to confirm.
4. Repeat steps 1-3 to store other DAB stations.
SRD 6600 DAB 12j.indb 6 09.09.2016 14:17:38
EN 7
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3.8.4. Show DAB information
During DAB radio broadcast, press INFO button repeatedly to scroll through the
following information (if available):
• Station name
• Channel and frequency
• Audio bit rate
• Signal strength
• Time/ Date
• Dynamic label segment (DLS)
• Program type (Prg Type)
3.8.5. Use DAB menu
1. In DAB mode, press MENU button to access the DAB menu.
2. Press TUNE +/- to scroll through the menu options:
– [Full scan]: scan all the available DAB radio stations
– [Manual tune]: tune to aspecific channel/frequency manually and add it to the
station list.
– [DRC]: add or remove adegree of compensation for the differences in the
dynamic range between radio stations.
– [Language]: Czech/ Slovak/ English
3. To select an option, press SELECT button.
4. Repeats steps 2-3 if any sub-option is available under an option.
3.9. Main Menu
[SYSTEM]
– Clock setup: Set time synchronization by radio or manual; set time and date.
– SW version: know the software version of the unit.
– Factory Reset: reset all the settings to factory default.
Note:
If no button is pressed within 15 seconds, the menu exits. This is not amal-function.
3.10. Listen to FM radio
1. Press FUNCTION button repeatedly to select FM radio.
2. Press SCAN button to start auto scan or
Press TUNE +/- button to tune to aradio station.
3. Press and hold TUNE +/- button to tune to the next strongest radio station.
3.10.1. Mono/ Auto (Stereo) mode
Press ST.MO button to select Audio mode to MONO or AUTO.
SRD 6600 DAB 12j.indb 7 09.09.2016 14:17:38
8 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3.10.2. Store FM Radio stations manually
1. Tune to FM radio station.
2. Press and hold PRESET button in 3 secs to activate programming mode.
3. Display show P1 and briefly, press TUNE +/- repeatedly to select apreset number
4. Press SELECT to confirm
5. Repeat steps 1-4 to store more FM stations.
3.10.3. Select apreset FM radio station
– In FM mode, to select any preset number; press PRESET.
– Press TUNE +/- repeatedly then press SELECT to select the preset station.
3.10.4. Use FM menu
1. In FM mode, press MENU button to access FM menu.
2. Press TUNE +/- to scroll the menu options:
[Scan setting]
[Audio setting]
[Language] : English / German
[Main menu]
3. To select an option, press SELECT button
4. Repeat steps 2-3 if any sub-option is available under an option.
Scan setting
– [All stations]: scan all the available radio stations.
– [Strong only]: scan stations with strong signals only.
Audio setting
– [Stereo allowed]: scan the radio stations in stereo. (Defaulted)
– [Forced mono]: scan the radio stations with mono only.
3.10.5. Show RDS information
RDS (Radio Data System) is aservice that allows FM stations to show additional
information.
1. Tune to aRDS station.
2. Press INFO repeatedly to scroll through the following information (if available):
[Program Type]
[Radio text]
[Signal strength]
[Date/Time]
[Frequency]
[Stereo/Mono] – Audio mode. This option enables you to set the radio to receive
FM stations in Auto mode (Mono/Stereo) or in Mono only.
SRD 6600 DAB 12j.indb 8 09.09.2016 14:17:38
EN 9
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3.11. Factory Reset
This option will restore all settings to ‚ factor yoriginal’. All clock, station lists and
stored preset stations will be cleared. After factor yreset the radio will automatically
re-scan the DAB band.
3.12. Aux in
Connect your auxiliary device to the 3.5mm AUX IN socket on the back of the unit. An
auxiliary device could be aMP3 player, aCD Walkman or apersonal computer etc.
3.13. SLEEP function
During DAB/ FM/ AUX mode, press SLEEP button repeatedly to chosen the sleep time.
The sequences is OFF > 15 > 30 > 45 > 60 > 75 > 90 mins.
After that press SELECT button to confirm the sleep time, the LCD display will indicate
the remaining sleep time. The radio player stops playing after the chosen time has
elapsed.
Sleep time
counter
SRD 6600 DAB 12j.indb 9 09.09.2016 14:17:38
10 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Troubleshooting
4. Troubleshooting
PROBLEM CAUSE / SOLUTION
No power – Slide the power switch to ON position.
– Ensure that the power plug is connected properly.
– Ensure that there is power at the AC Mains.
– Ensure that the batteries are fully charged.
– If a“Battery” icon is empty appears on the screen,
please use the included 5V1A adaptor and charge
the unit or use the AC power instead.
No sound – Adjust the volume
– Make sure AUX in cable was not connected if
listen to FM/ DAB radio
No response from the unit – Slide the power switch to OFF position.
– Disconnect and reconnect the AC power plug, then
turn on the unit again.
Poor DAB/ FM reception – Make sure Antenna is fully extended.
– Electrical interference in your home can cause
poor reception. Move the unit away from them
(especially those with motors and transformers).
SRD 6600 DAB 12j.indb 10 09.09.2016 14:17:38
EN 11
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Specifications
5. Specifications
General
Power requirements: AC Power 100-240V ~ 60/ 50Hz, 0.2A Max
DC input: 5 V , 1 A
Rechargeable Li-ion Battery: Type: BL-5C battery (3.7 V, 1000 mAh)
Use specified charger only.
Power consumption: 9 W(operation)
Battery playback time: 4-5 hrs at 50% volume level.
Weight of main unit: 0.68 kg
Dimensions – Main Unit (W × D× H): 247 × 60 × 157 mm
Output Power: 2 × 2 Watt RMS
Tuner
DAB: 174.928–239.200 MHz
FM Tuning range: 87.5 MHz to 108 MHz
Preset memory stations: DAB-10 / FM-10
Aux-in
3,5mm Aux-in jack, cable not included.
The above given specifications can change without prior notice.
Manufacturer address: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany
The original version is in Czech.
The CE symbol shown on the unit, in the user’s manual and on the package indicates
the unit meets the basic requirements of guideline R&TTE, 1995/5/EC, Guideline for
low voltage 73/23/EEC. The declaration of conformity can be found at www.sencor.cz.
SRD 6600 DAB 12j.indb 11 09.09.2016 14:17:38
12 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of packaging material at apublic waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging
indicates that this product shall not be treated as household waste. Please,
dispose of this product at your applicable collection point for the recycling of
electrical & electronic equipment waste. Alternatively in some states of the
European Union or other European states you may return your products to
your local retailer when buying an equivalent new product.
The correct disposal of this product will help save valuable natural resources
and help in preventing the potential negative impact on the environment and
human health, which could be caused as aresult of improper liquidation of
waste. Please ask your local authorities or the nearest waste collection centre
for further details. The improper disposal of this type of waste may fall subject
to national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about
the correct disposal method from local government departments or from your
seller.
This appliance complies with EU rules and regulations regarding
electromagnetic and electrical safety.
Changes to the text, design and technical specifications may occur without prior notice
and we reserve the right to make these changes.
SRD 6600 DAB 12j.indb 12 09.09.2016 14:17:38
EN 13
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
EN
Warranty conditions
Warranty card is not apart of the device packaging.
This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty
is limited to the following conditions. Warranty is referred only to the customer goods using for common
domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or
at below mentioned authorized service shops. The end-user is obligated to set up aclaim immediately when
the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify
the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted.
In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim
application till the date of taking over the product by end-user, or the date the end-user is obligated to take it
over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed
following documents: receipt, certificate of warranty, certificate of installation.
This warranty is void especially if apply as follows:
• Defects which were put on sale.
• Wear-out or damage caused by common use.
• The product was damaged by unprofessional or wrong installation, used in contrary to the applicable
instruction manual, used in contrary to legal enactment and common process of use or used for another
purpose which has been designed for.
• The product was damaged by uncared-for or insufficient maintenance.
• The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
• Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
• The product was mechanically damaged (e.g. broken button, fall).
• Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable
working conditions (e.g. high temperatures, high humidity, quakes).
• Repair, modification or other failure action to the product by unauthorized person.
• End-user did not prove enough his right to claim (time and place of purchase).
• Data on presented documents differs from data on products.
• Cases when the claiming product cannot be indentified according to the presented documents (e.g. the
serial number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor.eu for detailed information about authorized service centers.
SRD 6600 DAB 12j.indb 13 09.09.2016 14:17:38
SRD 6600 DAB 12j.indb 14 09.09.2016 14:17:38
PŘENOSNÉ DAB RÁDIO
SENCOR SRD 6600 DAB+
NÁVOD KOBSLUZE
CZ
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:38
SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:38
CZ 1
CZ
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Bezpečnostní informace
1. Bezpečnostní informace
DŮLEŽITÉ BEZPEČNOSTNÍ INFORMACE
Vykřičník uvnitř rovnostranného trojúhelníku má za úkol upozornit uživatele
na přítomnost důležitých provozních aservisních pokynů vliteratuře dodávané
spřístrojem.
VAROVÁNÍ:
PRO SNÍŽENÍ RIZIKA ÚRAZU ELEKTRICKÝM PROUDEM NEODSTRAŇUJTE
KRYT (ANI ZADNÍ). PŘÍSTROJ NEOBSAHUJE ČÁSTI OPRAVITELNÉ
UŽIVATELEM, PŘENECHEJTE SERVIS KVALIFIKOVANÉMU SERVISNÍMU
PERSONÁLU.
1. ČTĚTE INSTRUKCE – Všechny bezpečnostní aprovozní instrukce by měly být
přečteny před zahájením provozu tohoto produktu.
2. UCHOVEJTE INSTRUKCE – Tyto bezpečnostní aprovozní pokyny by měly být
zachovány pro budoucí použití.
3. ŘIĎTE SE VAROVÁNÍM – Všechna varování na výrobku av návodu kobsluze je
třeba dodržovat.
4. NÁSLEDUJTE INSTRUKCE – Je třeba dodržovat všechny pokyny pro provoz
apoužívání.
5. VODA AVLHKOST – Nikdy nepoužívejte tento produkt vblízkosti vody – například
vblízkosti vany, umyvadla, kuchyňského dřezu, prádelny; ve vlhkém sklepě nebo
vblízkosti bazénu, apodobně. Tento přístroj nesmí být vystaven kapající nebo
stříkající vodě ažádné nádoby stekutinami, jako jsou vázy, nesmí být umístěny
na přístroji. Vpřípadě zasažení tekutinou okamžitě odpojte od napájení avyjměte
baterii.
6. ČIŠTĚNÍ – Před čištěním odpojte tento výrobek od elektrické zásuvky.
Nepoužívejte tekuté nebo aerosolové čističe. Použijte vlhký hadřík.
7. VENTILACE – Sloty aotvory vobalu přístroje slouží květrání azajištění
spolehlivého chodu přístroje ak jeho ochraně před přehřátím. Tyto otvory nesmí
být zakryty ani jinak omezeny. Tyto otvory by neměly být blokovány umisťováním
přístroje na postel, pohovku, koberec nebo jiný podobný povrch. Tento výrobek
by neměl být umisťován do vestavěného nábytku, jako je knihovna nebo polička,
pokud nebude zajištěno dobré větrání. Viz pokyny výrobce*, které by měly být
dodrženy.
8. PŘÍSLUŠENSTVÍ – Používejte pouze doplňky / příslušenství specifikované
výrobcem
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:38
2 CZ
CZ
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Bezpečnostní informace
9. ZDROJE NAPÁJENÍ – Tento výrobek musí být napájen typem zdroje energie
uvedeným na štítku soznačením. Pokud si nejste jisti, jaký typ napájení máte
doma, poraďte se sprodejcem výrobku nebo smístní energetickou společností.
Uvýrobků určených pro provoz zvestavěné baterie naleznete tuto informaci
vnávodu kobsluze.
10. OBDOBÍ NEVYUŽÍVÁNÍ – Vpřípadě dlouhého nepoužívání zařízení odpojte
napájecí kabel výrobku ze zásuvky, vyjměte baterii apřepněte vypínač do polohy
OFF.
11. VNIKNUTÍ PŘEDMĚTŮ AKAPALIN – Nikdy netlačte předměty jakéhokoli druhu do
otvorů tohoto výrobku, protože by se mohly dotknout míst, které jsou pod vysokým
napětím nebo způsobit zkrat, což může způsobit požár nebo úraz elektrickým
proudem. Nikdy nelijte žádnou tekutinu na výrobek.
12. TEPLO – Produkt by měl být umístěn mimo zdroje tepla, jako jsou radiátory,
akumulátory, kamna nebo jiná zařízení (včetně zesilovačů), které produkují teplo.
13. Chraňte napájecí kabel před pošlapáním nebo přiskřípnutím, zejména uzástrček,
zásuvek, amíst, kde kabel opouští přístroj.
14. SERVIS – Nepokoušejte se tento produkt opravovat sami, protože po otevření nebo
odstranění krytů se můžete vystavit nebezpečnému napětí nebo jinému nebezpečí.
Veškeré opravy přenechte kvalifikovanému servisnímu technikovi. Vpřípadě
neodborného zásahu do zařízení zaniká záruční lhůta!
15. Přístroj nesmí být vystaven kapající nebo stříkající vodě
16. Používá-li se zástrčka adaptéru pro vypínání přístroje, zařízení je připraveno
kpoužití.
17. VAROVÁNÍ: Neotvírejte. Uvnitř přístroje nejsou žádné díly vyměnitelné uživatelem.
Opravu svěřte kvalifikovanému technikovi.
18. VAROVÁNÍ: Nikdy nepoužívejte mazací přípravek na žádnou část tohoto přístroje.
19. VAROVÁNÍ: Umístěte tento přístroj na rovný, pevný astabilní povrch.
20. VAROVÁNÍ: Nepokládejte tento přístroj na jiné elektrické zařízení.
21. VAROVÁNÍ: Tento přístroj chraňte před přímým slunečním světlem, otevřeným
ohněm nebo žárem.
SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:38
/