Ferm CDM1146 Používateľská príručka

Kategória
Elektrické náradie
Typ
Používateľská príručka
WWW.FERM.COM
CDM1146
CDM1146
EN
NL
FR
DE
PL
CS
SK
IT
ES
Original instructions 05
Vertaling van de oorspronkelijke gebruiksaanwijzing 11
Traduction de la notice originale 18
Übersetzung der Originalbetriebsanleitung 26
Tłumaczenie instrukcji oryginalnej 33
Překlad püvodního návodu k používání 41
Preklad pôvodného návodu na použitie 47
Traduzione delle istruzioni originali 54
Traducción del manual original 61
2
Fig. A
Fig. B-1
Fig. B-3
Fig. B-2
Fig. B-4
1
4
5
6
4
4
9
11
12 1311 11
11
4
12
13
7
3
Fig. C
Fig. D
Fig. E
18
10
8
10
4
2
3
4
Fig. F Fig. G
17
16
5
EN
Li-Ion screwdriver 4V
CDM1146
Thank you for buying this Ferm product. By doing
so you now have an excellent product, delivered
by one of Europe’s leading suppliers. All products
delivered to you by Ferm are manufactured
according to the highest standards of
performance and safety. As part of our philosophy
we also provide an excellent customer service,
backed by our comprehensive warranty. We hope
you will enjoy using this product for many years
to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock
Variable electronic speed
Rotation, left/right
Do not use in rain
Indoor use only
Max temperature 40
0
C
Do not throw the battery into fire
Do not throw the battery into water
Do not dispose of the product in
unsuitable containers.
Separate collection for Li-ion battery.
The product is in accordance with the
applicable safety standards in the
European directives.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
6
EN
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b)
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your nger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c)
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
7
EN
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specied
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of re when used with another
battery pack.
b)
Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modied. Damaged or modied
batteries may exhibit unpredictable behaviour
resulting in re, explosion or risk of injury.
f) Do not expose a battery pack or tool to
re or excessive temperature. Exposure to
re or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C“
can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specied in the
instructions. Charging improperly or at
temperatures outside the specied range may
damage the battery and increase the risk of
re.
6) Service
a) Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Additional safety warnings for drills
and screw drivers
a) Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b) Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
c) Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
d) Hold the machine with a firm grip. High
reaction torque can briefly occur while driving
in and loosening screws.
e) Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f) Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
g) Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the
direction switch to the middle position.
Unintentional actuation of the On/Off switch
can lead to injuries.
Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
8
EN
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Residual risks
Even when the power tool is used as
prescribed it is not possible to eliminate all
residual risk factors. The following hazards
may arise in connection with the power tool’s
construction and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.
2. MACHINE INFORMATION
Intended use
This screw driver is intended for driving in and
loosening screws. When using the cutting head
you are able to cut through textile, cardboard and
paper.
Technical specifications
Model No CDM1146
Recommended USB charger CDA1135
output of USB charger 5VDC 500-1000mA
Rechargeable Battery pack 4V Li-ion 1.5Ah
Battery charging time 2-3 hours
Chuck capacity ¼” (6.35mm) hex
No load speed 200 /min
Sound pressure level L
PA
66.2 dB(A) K= 3 dB(A)
Sound power level L
WA
77.2 dB(A) K= 3 dB(A)
Hand-arm vibration a
h
(screw driving without impact)
0.8 m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2-4
Fig. A
1. Machine
2. Charging socket
3. Battery indication light
4. Bit holder
5. Direction switch
6. On / off switch
7. Work light
8. Charger adapter (not included)
9. Cover
10. Screwdriver bit
11. Unlock buttons
12. Cutting head
13. Angle driver head
14. Guide edge
15. Blade guard
16. Blade screw
17. Blade
18. Blade guard screw
9
EN
3. OPERATING
The machine must be charged before
first use.
Charging the machine
Fig. D
Plug the charger cable (included) into an
adapter (not included).
Plug the charger cable (2) into the machine.
Plug the charger plug into an electrical outlet
and wait for a while. The charger indication
light (3) will lighten up and show the charging
status.
Fully charging the battery may take up to 2 - 3
hours.
Checking the battery charge status
Fig. D
The battery indication light (3) shows the remaining
battery charge when the on/off switch (6) is pressed.
The battery indication light (3) has three lights
indicating the remaining charge level. The more
lights that burn, the more charge the battery has left.
When the RED light is burning, it means the
battery is almost empty and should be charged.
Fitting and removing drills or screwdriver bits
Fig. C
The machine bit holder (4) is suitable for drills and
screwdriver bits with a standard ¼ inch hexagonal
shaft. To fit a screwdriver bit:
Insert the screw driver bit (10) into the
machine’s bit holder (4), it will be hold by a
magnet.
The screw driver bit can be removed by pulling
it out of the bit holder again.
The same steps can be followed after a driver
head attachment is mounted (read: Cutting head/
Angle Driver Head Attachements)
Adjusting the direction of rotation
Fig. A
Set the direction switch (5) to position ‘’ in
order to drive screws or to use it for drilling.
Set the direction switch (5) to position ‘’ in
order to remove screws.
Switching the machine on and off
Fig. A
Pressing the on/off switch (6) will activate the
machine.
Releasing the on/off switch (6) will stop the
machine.
Move the direction switch (5) to the middle
position to lock the movement of the on/off
switch. It cannot be activated in this position.
The machine is equipped with electronic
overload protection function. When the
machine gets overloaded it will shut
down automatically. When this happens,
please wait for at least 5 seconds to let
the overload protection reset itself.
Spindle lock function
The machine is fitted with an automatic spindle
lock feature. When the on/off switch (6) is not
pressed, the bit holder (4) rotation is locked. Now
it is possible to use the screwdriver (even when
the battery is empty) as a manual tool.
Cutting head/Angle Driver Head
Fig. B
The cutting head (12) can be used to cut trough
textile, cardboard and paper.
The angle driver head (13) allows screwdriving at
hard to reach locations. The attachments can be
mounted offset in different angles.
To assemble an attachment:
Move the direction switch (5) to the middle
position, preventing accidental activation of
the on/off switch.
Pull off the cover (9) towards the front.
Carefully push the attachment onto the
machine.
To disassemble an attachment:
Move the direction switch (5) to the middle
position.
Push the unlock buttons (11) on both sides of
the machine.
Carefully pull the attachment off the machine.
Changing the Blade
Fig. E - G
Note: Replace the blade only when the cutting
adapter is mounted on the screwdriver. This
10
EN
ensures that the tool spindle is locked and the
blade screw can be loosened.
Set the direction switch (5) to the middle
position.
Remove the blade guard (15) by loosing the
blade guard screw(18) (fig. E), lift up the left
side and slide to the right.
Unscrew the blade screw (16) (fig. F).
Remove the blade (17)
Place the new blade, ensure that the sloping
edge of the blade faces you (fig. G)
Retighten the blade screw (16)
Place the blade guard (15) back and retighten
the blade guard screw (18).
Working Advice
Do not overload the machine, when
overloading the machine it may come to
a standstill.
The cutting performance depends on the
materials to be cut. When machine is fully
charged the result will be better.
Always make sure the blade is clean and free
form excess materials.
Make sure nothing can get wedged during
cutting by holding the guide edge (14) parallel
to the cutting surface.
Especially thin materials, such as fabrics, can
be pulled into the machine during cutting.
Always be careful and do not apply too much
pressure in order to achieve good cutting
results. Apply sufficient tension to the fabrics
and cut slowly.
Improper use of the blade will cause it to
become blunt.
Optimum cutting results are best determined
through testing on a small part of the material.
4. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and/or remove the
battery pack from the machine.
Remove the cutting adapter from the
screwdriver to clean it. There is danger of
injury when unintentionally actuating the On/
Off switch.
Be careful when cleaning the blade and
counterblade. The blades have sharp edges
which you can injure yourself on.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date
of original purchase. Should the product develop
any failure during this period due to defective
material and/or workmanship then contact your
FERM dealer directly.
The following circumstances are excluded from
this guarantee:
Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
Normal wear and tear.
The tool has been abused, misused or
improperly maintained.
Non-original spare parts have been used
11
NL
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including
the implied warranties of merchantability and
fitness for a particular purpose. In no event shall
FERM be liable for any incidental or consequential
damages. The dealers remedies shall be limited
to repair or replacement of nonconforming units
or parts.
Li-ion accuschroevendraaier 4V
CDM1146
Dank u voor het aanschaffen van dit Ferm
product. Hierdoor bent u nu in het bezit van
een uitstekend product, geleverd door een van
de toonaangevende leveranciers van Europa.
Alle door Ferm aan u geleverde producten zijn
vervaardigd conform de hoogste prestatie- en
veiligheidsnormen. Deel van onze filosofie is de
uitstekende klantenservice die wordt ondersteund
door onze uitgebreide garantie. Wij hopen dat u
dit product vele jaren met plezier zult gebruiken.
1. VEILIGHEIDSVOORSCHRIFTEN
Lees de bijgesloten veiligheids-
waarschuwingen, de aanvullende
veiligheidswaarschuwingen en de
instructies. Het niet opvolgen van de
veiligheidswaarschuwingen kan elektrische
schokken, brand en/of ernstig letsel tot gevolg
hebben. Bewaar de veiligheidswaarschuw-
ingen en instructies als naslagwerk voor later.
De volgende symbolen worden gebruikt in de
gebruikershandleiding of op het product:
Lees de gebruikershandleiding.
Gevaar voor lichamelijk letsel, overlijden
of schade aan de machine wanneer de
instructies in deze handleiding niet
worden opgevolgd.
Gevaar voor elektrische schokken
Variabele elektronische snelheid
Draairichting, links/rechts
Niet gebruiken in regen
Alleen binnenshuis gebruiken
Max. temperatuur 400C
12
NL
Accu niet verbranden
Accu niet in het water gooien
Werp het product niet weg in
ongeschikte containers.
Aparte inzameling van Li-ion-accu’s.
Het product is in overeenstemming met
de van toepassing zijnde
veiligheidsnormen in de Europese
richtlijnen.
ALGEMENE VEILIGHEIDSVOOR-
SCHRIFTEN
WAARSCHUWING!
Lees alle veiligheidswaarschuwingen
en alle instructies. Het niet opvolgen
van onderstaande instructies kan leiden tot een
elektrische schok, brand en/of ernstig persoonlk
letsel.
Bewaar deze instructies.
De term “elektrisch gereedschap” in onder staande
waarschuwingen heeft betrekking op zowel
apparatuur met een vaste elektriciteits kabel als op
apparatuur met een accu (draadloze apparatuur).
1) Werkgebied
a)
Zorg voor een opgeruimde en goed verlichte
werkomgeving. Rommelige en donkere
werkomgevingen leiden tot ongelukken
b)
Gebruik elektrisch gereedschap nooit in
een omgeving waar explosiegevaar bestaat,
zoals in de nabheid van ontvlambare
vloeistoffen, gassen, dampen of andere
stoffen. Elektrische gereedschappen kunnen
vonken veroorzaken, die deze stoffen tot
ontbranding kunnen brengen.
c) Wanneer u elektrisch gereedschap
gebruikt, houd dan kinderen en
omstanders op afstand. Wanneer u
wordt afgeleid, kunt u de controle over het
gereedschap verliezen.
2) Elektrische veiligheid
a) Stekkers van elektrische gereedschappen
moeten probleemloos passen op het
stopcontact. Breng nooit wzigingen
aan in of aan de stekker. Gebruik geen
adapters voor geaarde elektrische
gereedschappen. Standaardstekkers en
passende stopcontacten verkleinen de kans
op een elektrische schok.
b) Voorkom lichamelk contact met geaarde
oppervlakken van bvoorbeeld ppen,
leidingen, radiatoren, fornuizen en koel-
kasten. Wanneer uw lichaam geaard is, wordt
de kans op een elektrische schok groter.
c) Stel elektrische gereedschappen nooit
bloot aan regen of vocht. Wanneer er water
binnendringt in een elektrisch gereedschap,
wordt de kans op een elektrische schok groter.
d) Gebruik het snoer niet om het elektrisch
gereedschap te dragen, te verplaatsen
of de stekker uit het stopcontact te
trekken. Bescherm het snoer tegen olie,
warmte, scherpe randen en bewegende
delen. Beschadigde of vastzittende snoeren
vergroten de kans op een elektrische schok.
e) Wanneer u elektrische gereedschappen
buiten gebruikt, gebruik dan een
verlengkabel die geschikt is voor
buitengebruik. Door een kabel te gebruiken
die geschikt is voor buitengebruik, wordt de
kans op een elektrische schok kleiner.
f) Gebruik een aardlekbeveiliging (RCD) als
niet te voorkomen is dat een powertool
moet worden gebruikt in een vochtige
omgeving. Gebruik van een RCD vermindert
het risico van elektrische schokken.
3) Persoonlijke veiligheid
a) Blf altd alert, kk goed wat u doet en
gebruik uw gezonde verstand wanneer
u een elektrisch gereedschap gebruikt.
Gebruik geen elektrische gereedschappen
wanneer u moe bent, of drugs, alcohol of
medicnen hebt gebruikt. Eén moment van
onachtzaamheid b het gebruik van elektrische
gereed schappen kan ernstige verwondingen
tot gevolg hebben.
b) Gebruik persoonlke beschermings
middelen. Draag altd een veiligheidsbril.
Een gepast gebruik van veiligheids voor-
zieningen, zoals een stof masker, speciale
13
NL
werkschoenen met antislipzolen, een
veiligheidshelm en gehoor bescherming
verkleinen de kans op persoonlk letsel.
c) Voorkom dat het gereedschap per ongeluk
wordt gestart. Zorg dat de schakelaar op
de UIT positie staat, voordat u de stekker
in het stopcontact steekt. Draag elektrisch
gereedschap nooit met uw vinger op de
schakelaar en steek ook nooit de stekker van
ingeschakelde elektrische gereedschappen in
het stopcontact: dit leidt tot ongelukken.
d) Verwder alle instel en andere sleutels uit
het elektrisch gereedschap voordat u hem
inschakelt. Instel en andere sleutels aan een
ronddraaiend onderdeel van het elektrisch
gereedschap kunnen tot verwondingen leiden.
e) Zorg dat u nooit uw evenwicht kunt
verliezen; houd altd twee voeten stevig
op de vloer. Hierdoor kunt u het elektrisch
gereedschap in on verwachte situaties beter
onder controle houden.
f) Zorg dat u geschikte kleding draagt. Draag
geen loshangende kleding of sieraden.
Houd uw haar, kleding en handschoenen
uit de buurt van bewegende delen. Loshan-
gende kleding, sieraden en lang haar kunnen
vast komen te zitten in bewegende delen.
g) Wanneer er voorzieningen zn voor de
aansluiting van stofafzuiginstallaties,
zorg dan dat ze op de juiste wze worden
aangesloten en gebruikt. Gebruik van deze
voorzieningen vermindert de gevaren die door
stof worden veroorzaakt.
h) Denk niet dat doordat u gereedschap vaak
gebruikt, u wel weet hoe het allemaal
werkt en dat u de veiligheidsbeginselen
voor het gebruik van het gereedschap wel
kunt negeren. Een onbezonnen actie kan in
een fractie van een seconde ernstig letsel tot
gevolg hebben.
4) Gebruik en onderhoud van elektrisch
gereedschap
a) Oefen geen overmatige kracht uit op
elektrisch gereedschap. Gebruik het
juiste gereedschap voor uw specieke
toepassing. Met het juiste elektrische
gereedschap voert u de taak beter en veiliger
uit wanneer dit op de snelheid gebeurt
waarvoor het apparaat is ontworpen.
b) Gebruik nooit elektrisch gereedschap
waarvan de AAN/UIT schakelaar niet werkt.
Ieder elektrisch gereedschap dat niet kan
worden in en uitgeschakeld met de schakelaar
is gevaarlk en moet worden gerepareerd.
c) Trek de stekker uit het stopcontact voordat
u wzigingen aanbrengt aan elektrische
gereedschappen, accessoires verwisselt
of het elektrisch gereedschap opbergt.
Wanneer u zich aan deze preventieve
veiligheidsmaatregelen houdt, beperkt u het
risico dat het gereedschap per ongeluk wordt
gestart.
d) Berg elektrisch gereedschap dat niet in
ge bruik is op buiten bereik van kinderen
en laat personen die niet bekend zn
met het gereedschap of deze instructies
het apparaat niet gebruiken. Elektrisch
gereedschap is gevaarlk in de handen van
ongeoefende gebruikers.
e) Zorg voor een goed onderhoud van
elektrisch gereedschap. Controleer of
bewegende delen op de juiste wze zn
vastgezet. Controleer ook of er geen
onderdelen defect zn of dat er andere
omstandigheden zn die van invloed
kunnen zn op de werking van het
gereedschap. Laat het gereedschap b
beschadigingen repareren vóór gebruik.
Veel ongelukken worden veroorzaakt door
slecht onderhoud van het gereedschap.
f) Zorg dat sn en zaagwerktuigen scherp en
schoon blven. Goed onderhouden sn en
zaagwerktuigen met scherpe randen zullen
minder snel vastlopen en zn eenvoudiger
onder controle te houden.
g) Gebruik alle elektrische gereedschappen,
accessoires, bitjes etc., zoals
aangegeven in deze instructies en op
de wze waarvoor het gereedschap is
ontworpen. Houd daarb rekening met de
werkomstandigheden en de uit te voeren
taak. Gebruik van elektrisch gereedschap
voor handelingen die afwken van de taken
waarvoor het apparaat is ontworpen kunnen
leiden tot gevaarlke situaties.
h)
Houd handgrepen en greepoppervlakken
droog, schoon en vr van olie en vet. Gladde
handgrepen en greepoppervlakken maken
veilig werken en controle over het gereedschap
in onverwachte situaties onmogelk.
14
NL
5) Gebruik en onderhoud accugereedschap
a) Laad alleen op met de lader die door de
fabrikant is gespeciceerd. Een lader die
voor een bepaalde accu geschikt is, kan brand
veroorzaken wanneer deze met een andere
accu wordt gebruikt.
b) Gebruik elektrisch gereedschap alleen
met de speciaal hiervoor bedoelde accu’s.
Gebruik van andere accu’s kan kans op letsel
en brand geven.
c) Wanneer de accu niet in gebruik is,
houd deze dan uit de buurt van andere
metalen voorwerpen zoals paperclips,
munten, sleutels, spkers, schroeven of
andere kleine metalen voorwerpen die
een verbinding tussen twee polen kunnen
maken. Kortsluiting tussen de accupolen kan
brandwonden of brand veroorzaken.
d) Wanneer de accu niet juist wordt gebruikt,
kan er vloeistof uit lopen; raak dit niet aan.
Wanneer dit per ongeluk wel gebeurt, spoel
dan met water. Wanneer de vloeistof in de
ogen komt, moet u een arts raadplegen.
De vloeistof uit de accu kan irritaties of
brandwonden veroorzaken.
e) Gebruiken niet een accu of gereedschap
dat beschadigd is of gemodiceerd.
Beschadigde of gemodiceerde accu’s
kunnen onvoorspelbaar gedrag vertonen, wat
brand, explosie of een risico van letsel met
zich meebrengt.
f) Stel een accu over het gereedschap niet
bloot aan open vuur of een uitzonderlk
hoge temperatuur. Blootstelling aan vuur of
een temperatuur hoger dan 130 °C, kan een
explosie veroorzaken. NB De temperatuur
van “130 °C” kan worden vervangen door de
temperatuur van “265 °F”.
g)
Houd u aan alle instructies voor het laden
en laad de accu of het gereedschap niet
op buiten het temperatuurbereik dat in de
instructies wordt aangeduid. Op een onjuiste
wze laden of laden b temperaturen buiten het
aangeduide bereik kan de accu beschadigen
en het risico van brand doen toenemen.
6) Service
a) Laat uw gereedschap onderhouden door
een gekwaliceerde onderhoudstechnicus
die alleen gebruikmaakt van identieke
vervangingsonderdelen. Dit zorgt ervoor dat
de veiligheid van de powertool intact blft.
b) Voer nooit servicewerkzaamheden uit aan
beschadigde accu’s. Alleen de fabrikant
of geautoriseerde service-providers mogen
servicewerkzaamheden aan accu’s uitvoeren.
Aanvullende veiligheids waar schuw ingen
voor boormachines en schroevendraaiers
a) Draag gehoorbescherming bij gebruik
klopboorfunctie. Blootstelling aan lawaai kan
tot gehoorbeschadiging leiden.
b)
Gebruik de zijgreep (-grepen), indien met de
machine meegeleverd. Verlies van controle over
de machine kan lichamelijk letsel veroorzaken.
c) Houd de powertool vast bij de geïsoleerde
greepvlakken wanneer u een handeling
uitvoert waarbij het snijhulpstuk in contact
kan komen met verborgen bedrading of
het eigen snoer. Wanneer het snijhulpstuk
een onder spanning staande draad raakt,
kunnen de metalen delen van het apparaat
onder spanning komen te staan waardoor de
gebruiker een elektrische schok kan krijgen.
d) Houd de machine vast in een stevige greep.
Wanneer u schroeven indraait of losdraait, kan
een zeer krachtige torsiereactie optreden.
e) Zet het werkstuk stevig vast. Een werkstuk
dat met klemmen of een bankschroef is
vastgezet, is stabieler dan wanneer u het
vasthoudt met de hand.
f) Zet de machine altijd pas neer wanneer de
machine volledig tot stilstand is gekomen.
Het inzetstuk van het gereedschap kan
vastlopen en dat kan tot verlies van controle
over het elektrisch gereedschap leiden.
g) Voordat u werkzaamheden aan de machine
uitvoert (bijv., onderhoud, wisseling van
hulpstukken, enz.), en ook bij vervoer en
opslag, moet u de richtingschakelaar in de
middelste stand zetten. Wanneer de aan/uit-
schakelaar onbedoeld wordt bediend, kan dat
leiden tot letsel.
Gebruik en onderhoud
accugereedschap
a) Uitsluitend herladen met de door de
fabrikant opgegeven acculader. Een
acculader die voor een bepaald type accupack
geschikt is kan brandgevaar opleveren
wanneer deze wordt gebruikt met een ander
accupack.
15
NL
b) Gebruik powertools uitsluitend met
speciaal daarvoor bestemde accupacks.
Het gebruik van andere accupacks kan gevaar
voor letsel en brand opleveren.
c) Houd, wanneer u het accupack niet
gebruikt, dit uit de buurt van andere
metalen voorwerpen, zoals paperclips,
muntstukken, sleutels, spijkers, schroeven
of andere kleine metalen voorwerpen, die
voor verbinding kunnen zorgen tussen
de twee accupolen. Kortsluiting tussen
de accupolen kan brandplekken of brand
veroorzaken.
d) Bij onjuist gebruik kan er vloeistof uit de
accu komen; vermijd het contact hiermee.
Spoel de plek met water in het geval dat
u toch per ongeluk ermee in aanraking
komt. Roep tevens medische hulp in
wanneer de vloeistof in contact komt met
uw ogen. Vloeistof uit de accu kan irritatie of
brandwonden veroorzaken.
Overblijvende risico’s
Zelfs wanneer de elektrische machine op de
voorschreven wijze wordt gebruikt, is het niet
mogelijk alle overblijvende risicofactoren
weg te nemen. De volgende risico’s kunnen
optreden in verband met de constructie en het
ontwerp van de elektrische machine:
a)
Gezondheidsklachten die het gevolg zijn van
de trillingsemissie bij langdurig of onjuist
gebruik of onjuist onderhoud van de powertool.
b) Letsel en schade aan eigendommen vanwege
kapotte hulpstukken die opeens losschieten.
Waarschuwing! Deze powertool
produceert een elektromagnetisch veld
tijdens zijn werking. Dit veld kan onder
bepaalde omstandigheden storend
werken op actieve of passieve medische
implantaten. Ter verkleining van het risico
van ernstig of dodelijk letsel raden wij
personen met medische implantaten aan
om hun arts of de fabrikant van het
medisch implantaat te raadplegen
voordat zij deze elektrische machine gaan
gebruiken.
2. TECHNISCHE INFORMATIE
Bedoeld gebruik
Deze schroevendraaier is bedoeld voor het vasten
losschroeven van schroeven. Als u de snijkop
gebruikt, kunt u door textiel, karton en papier
snijden.
Technische specificaties
Modelnr. CDM1146
Aanbevolen USB laadapparaat CDA1135
Uitgang van USB acculader 5VDC 500-1000mA
Herlaadbaar accupack 4V Li-ion 1,5Ah
Laadtijd accu 2-3 uur
Capaciteit boorkop ¼” (6.35mm) zeskantig
Onbelast toerental 200 /min
Geluidsdrukniveau L
PA
66,2 dB(A) K= 3 dB(A)
Geluidsvermogensniveau L
WA
77,2 dB(A) K= 3 dB(A)
Trilling voor hand/arm a
h
(schroeven draaien zonder
klopboorfunctie)
0,8 m/s
2
K=1,5 m/s
2
Trillingsniveau
Het trillingsemissieniveau dat in deze
gebruiksaanwijzing wordt vermeld, is gemeten
conform een gestandaardiseerde test in EN
62841; deze mag worden gebruikt om twee
machines met elkaar te vergelijken en als
voorlopige beoordeling van de blootstelling
aan trilling bij gebruik van de machine voor de
vermelde toepassingen.
Het gebruik van de machine voor andere
toepassingen, of met andere of slecht
onderhouden accessoires, kan het
blootstellingsniveau aanzienlijk verhogen.
Wanneer de machine is uitgeschakeld of
wanneer deze loopt maar geen werk verricht, kan
dit het blootstellingsniveau aanzienlijk reduceren.
Bescherm uzelf tegen de gevolgen van
trilling door de machine en de accessoires te
onderhouden, uw handen warm te houden en uw
werkwijze te organiseren.
Beschrijving
De nummers in de tekst verwijzen naar de
diagrammen op pagina 2-4
16
NL
Afb. A
1. Machine
2. Laadaansluiting
3. Accu-indicatielampje
4. Bithouder
5. Richtingschakelaar
6. Aan-/Uitschakelaar
7. Werklicht
8. Laderadapter (niet inbegrepen)
9. Kap
10. Schroevendraaierbit
11. Ontgrendelknoppen
12. Snijkop
13. Hoek-aandrijfkop
14. Geleidingsrand
15. Beschermkap
16. Messchroef
17. Mes
18. Beschermkapschroef
3. BEDIENING
De machine moet zijn opgeladen voordat
deze voor het eerst wordt gebruikt.
De machine opladen
Afb. D
Steek de stekker van de kabel van de
lader (meegeleverd) in een adapter (niet
meegeleverd).
Steek de stekker van de kabel (2) van de lader
in de machine.
Steek de stekker van de acculader in
een stopcontact en wacht even. Het
ledcontrolelampje (3) gaat branden en toont de
status van de lader.
Het volledig opladen van de accu kan 2 - 3 uur
duren.
De status van het opladen van de accu
controleren
Afb. D
Wanneer u op de aan/uit-schakelaar (6) drukt,
toont het accu-indicatielampje (3) hoeveel lading
de accu nog heeft. Het accu-indicatielampje (3)
heeft drie lichtjes die laten zien hoeveel lading de
accu nog heeft. Hoe meer lichtjes branden, des
te meer lading heeft de accu nog. Wanneer het
RODE lampje brandt, betekent dat dat de accu
bijna leeg is en moet worden opgeladen.
Boortjes en schroefbits monteren en
verwijderen
Afb. C
De bithouder van de machine (4) is geschikt voor
boortjes en schroefbits met een standaard ¼-inch
zeskantige as. Voor het plaatsen van een schroefbit:
Plaats de schroefbit (10) in de bithouder van
de machine (4); deze wordt op zijn plaats
gehouden door een magneet.
U kunt de schroefbit verwijderen door deze
weer uit de bithouder te trekken.
U kunt op dezelfde wijze stapsgewijs te werk
gaan wanneer een aandrijfkop-hulpstuk is
gemonteerd (lees: Hulpstukken Snijkop/Hoek-
aandrijfkop)
De draairichting instellen
Afb. A
Zet de draairichtingsschakelaar (5) in de stand
’ om schroeven in te draaien of de machine
te gebruiken voor boren.
Zet de draairichtingsschakelaar (5) op stand
’ voor het verwijderen van schroeven.
De machine in- en uitschakelen
Afb. A
U schakelt de machine in door de aan/uit-
schakelaar (6) in te drukken.
U stopt de machine door de schakelaar Aan /
Uit (6) los te laten.
Zet de draairichtingsschakelaar (5) in de
middelste stand om de aan/uit-schakelaar te
vergrendelen. In deze stand kunt u de machine
niet inschakelen.
De machine is voorzien van een
elektronische beveiligingsfunctie tegen
overbelasting. Als de machine overbelast
wordt, slaat deze automatisch af. Mocht
dit gebeuren, wacht dan ten minste 5
seconden, zodat de beveiliging tegen
overbelasting zich opnieuw kan instellen.
De asvergrendelingsfunctie
De machine is uitgerust met een automatische
asvergrendelingsfunctie. Wanneer u de aan/
uit-schakelaar (6) niet indrukt, is de rotatie van
de bithouder (4) vergrendeld. U kunt nu de
schroevendraaier (zelfs als de accu leeg is) als
handwerktuig gebruiken.
17
NL
Hulpstukken snijkop/
hoek-aandrijfkop
Afb. B
De snijkop (12) kan worden gebruikt om door
textiel, karton en papier te snijden. Met de hoek-
aandrijfkop (13) kunt u schroeven indraaien op
moeilijk bereikbare plaatsen. De hulpstukken
kunnen in verschillende hoeken worden
gemonteerd.
Een hulpstuk plaatsen:
Zet de richtingschakelaar (5) in de middelste
stand, zodat de aan/uit-schakelaar niet per
ongeluk kan worden geactiveerd.
Trek de kap (9) naar voren los.
Duw voorzichtig het hulpstuk op de machine.
Een hulpstuk losnemen:
Zet de richtingschakelaar (5) in de middelste
stand.
Duw de ontgrendelknoppen (11) aan beide
zijden van de machine in.
Trek het hulpstuk voorzichtig van de machine.
Het mes vervangen
Fig. E - G
NB: Vervang het mes alleen indien de snij-adapter
op de schroevendraaier is gemonteerd. Dit zorgt
ervoor dat de gereedschapsas vergrendeld is en
de messchroef kan worden losgedraaid.
Zet de richtingschakelaar (5) in de middelste
stand.
Verwijder de beschermkap (15) door de
beschermkapschroef (18) los te draaien (fig. E),
til de linkerkant op en schuif het naar rechts.
Schroef de messchroef (16) los (fig. F).
Verwijder het mes (17)
Plaats het nieuwe mes, zorg ervoor dat de
schuine rand van het mes naar u toe is gericht
(fig. G)
Draai de messchroef (16) vast
Plaats de beschermkap (15) terug en draai de
beschermkapschroef (18) vast.
Werkadvies
Overbelast de machine niet, bij
overbelasting kan de machine tot
stilstand komen.
De snijprestaties zijn afhankelijk van de te
snijden materialen. Als de machine volledig is
opgeladen, is het resultaat beter.
Zorg altijd dat het mes schoon is en vrij van
overtollige materialen.
Zorg ervoor dat niets tijdens het zagen vast
kan komen te zitten door de geleidingsrand
(14) parallel aan het snijoppervlak te houden.
Vooral dunne materialen, zoals stoffen, kunnen
tijdens het snijden in de machine worden
getrokken. Wees altijd voorzichtig en oefen
niet te veel druk uit om goede snijresultaten te
bereiken. Breng voldoende spanning aan op
het materiaal en snijd langzaam.
Onjuist gebruik van het mes zal ertoe leiden
dat het bot wordt.
Optimale snijresultaten worden het best
bepaald door te testen op een klein deel van
het materiaal.
4. ONDERHOUD
Schakel, voordat u met de reiniging en
het onderhoud begint, altijd de machine
uit en/of haal het accupack uit de
machine.
Verwijder de snij-adapter van de
schroevendraaier om deze te reinigen. Er
bestaat verwondingsgevaar bij onbedoeld
bedienen van de aan/uit-schakelaar.
Wees voorzichtig bij het reinigen van het mes
en het tegenmes. De messen hebben scherpe
randen waaraan u zich kunt bezeren.
Reinig de machinebehuizing regelmatig met een
zachte doek, bij voorkeur iedere keer na gebruik.
Zorg dat de ventilatiesleuven vrij van stof en
vuil zijn. Gebruik bij hardnekkig vuil een zachte
doek bevochtigd met zeepwater. Gebruik geen
oplosmiddelen als benzine, alcohol, ammonia,
etc. Dergelijke stoffen beschadigen de kunststof
onderdelen.
MILIEU
Defecte en/of afgedankte elektrische of
elektronische gereedschappen dienen
ter verwerking te worden aangeboden
aan een daarvoor verantwoordelijke
instantie.
18
FR
Uitsluitend voor EG-landen
Werp elektrisch gereedschap niet weg bij het
huisvuil. Conform de Europese Richtlijn 2012/19/
EG voor Afgedankte Elektrische en Elektronische
Apparatuur en de implementatie ervan in
nationaal recht moet niet langer te gebruiken
elektrisch gereedschap gescheiden worden
verzameld en op een milieuvriendelijke wijze
worden verwerkt.
GARANTIE
FERM producten zijn ontworpen volgens de
hoogste kwaliteitsstandaarden en gegarandeerd
vrij van defecten, zowel materieel als
fabrieksfouten, tijdens de wettelijk vastgestelde
garantieperiode vanaf de eerste aankoopdatum.
Mocht het product tijdens deze periode gebreken
vertonen veroorzaakt door defecte materialen en/
of fabrieksfouten, neem dan rechtstreeks contact
op met uw FERM dealer.
De volgende situaties vallen niet onder de
garantie:
Er zijn reparaties of aanpassingen aan de
machine uitgevoerd, of er is een poging
daartoe ondernomen, door een niet-
geautoriseerd servicecentrum.
Normale slijtage.
De machine is misbruikt, verkeerd gebruikt of
slecht onderhouden.
Er zijn niet-originele reserveonderdelen
gebruikt
Dit vormt de enige garantie opgesteld door het
bedrijf zowel expliciet als impliciet. Er bestaan
geen andere garanties expliciet of impliciet welke
verder gaan dan deze garantie, inclusief impliciete
garanties van verkoopbaarheid en geschiktheid
voor bepaalde doeleinden. In geen enkel geval
kan FERM aansprakelijk worden gesteld voor
incidentele schade of gevolgschade. Reparaties
van dealers zijn gelimiteerd tot de reparatie of
vervanging van defecte producten of onderdelen.
Visseuse Li-Ion 4V
CDM1146
Merci d’avoir choisi ce produit Ferm. Vous avez
fait le choix d’un produit de qualité, fourni par
l’un des principaux fournisseurs européens. Tous
les produits vendus par Ferm sont fabriqués
conformément aux normes les plus strictes
en matière de performances et de sécurité.
Renforcée par notre garantie très complète,
l’excellence de notre service clientèle forme
également partie intégrante de notre philosophie.
Nous espérons que vous profiterez longtemps de
ce produit.
1. CONSIGNES DE SÉCURITÉ
En plus des avertissements de sécurité
suivants, veuillez veuillez également lire
les avertissements de sécurité
additionnels ainsi que les instructions. Le non-
respect des avertissements de sécurité et des
instructions peut entraîner une décharge électrique,
un incendie et/ou des blessures graves. Veuillez
conserver les avertissements de sécurité et les
instructions pour consultation ultérieure.
Les symboles suivants sont utilisés dans le
manuel d’utilisation ou apposés sur le produit:
Lisez le manuel d’utilisation.
Signale un risque de blessures, un
danger mortel ou un risque
d’endommagement de l’outil en cas de
non-respect des instructions de ce
manuel.
Risque de décharge électrique
Variateur électronique de vitesse
Rotation gauche/droite
Ne pas utiliser sous la pluie
Utilisation en intérieur uniquement
19
FR
Température max. 40
0
C
Ne jetez pas la batterie au feu
Ne jetez pas la batterie dans de l’eau
Ne jetez pas le produit dans des
conteneurs qui ne sont pas prévus à cet
effet.
La batterie Li-ion fait l’objet d’une
collecte séparée.
Le produit est conforme aux normes de
sécurité en vigueur spécifiées dans les
directives européennes.
CONSIGNES GÉNÉRALES DE
SÉCURITÉ
AVERTISSEMENT!
Veuillez lire l’intégralité des
avertissements de sécurité et des
instructions. Le non respect de toutes les
instructions indiquées ci dessous peut entraîner
un risque de choc électrique, d’incendie et/ou de
blessures graves.
Conservez ces instructions.
Le terme “appareil électrique” mentionné dans
tous les avertissements ci dessous se rapporte à
un appareil électrique qui se branche au réseau
électrique (grâce à un câble d’alimentation) ou à
un appareil électrique (sans l) fonctionnant grâce
à une batterie.
1) espace de travail
a) Veillez toujours à garder votre espace de
travail propre et bien éclairé. Les espaces
mal rangés et sombres peuvent être la cause
d’accidents.
b) N’utilisez pas les appareils électriques
dans des environnements susceptibles
d’explosion, par exemple en présence
de liquides inammables, de gaz ou
de particules. Les appareils électriques
provoquent des étincelles qui peuvent
enammer les particules des émanations.
c) Veillez à garder éloignés les enfants et
les personnes se trouvant dans votre
voisinage, lors de l’utilisation d’un appareil
électrique. Les disctractions peuvent vous
faire perdre le contrôle de l’appareil.
2) mesures de sécurité électriques
a) Les prises des appareils électriques
doivent être raccordées à la prise murale
corres pondante. Ne modiez jamais la
prise de l’appareil, de quelque façon que
ce soit. N’utilisez pas d’adaptateurs qui
mettent les appareils électriques à la terre
(mise à la masse). Des prises non modiées
et branchées à la prise murale correspondante
réduiront les risques de choc électrique.
b) Evitez le contact direct avec les surfaces
mises à la terre ou mises à la masse
comme les canalisations, les radiateurs,
les cuisinières et les réfrigérateurs. En effet,
le risque de choc électrique s’accrut si votre
corps est mis à la terre ou à la masse.
c) N’utilisez pas d’outils électriques dans des
evironnements pluvieux ou humides. Si de
l’eau s’introduit dans un appareil électrique, le
risque de choc électrique augmentera.
d) N’utilisez pas le câble de manière abusive.
N’utilisez jamais le câble pour transporter,
tirer ou débrancher l’appareil électrique.
Veillez à garder le câble éloigné des
sources de chaleur, des huiles, des rebords
coupants ou des pièces actionnées.
Les câbles endommagés ou entremêlés
augmentent le risque de choc électrique.
e) Lorsque un appareil est utilisé à l’extérieur,
utilisez uniquement un câble prolongateur
prévu à cet effet. L’utilisation d’un câble
à usage extérieur réduit le risque de choc
électrique.
f) Si vous êtes contraint d’utiliser un outil
électrique dans un environnement humide,
utilisez une alimentation protégée par
un dispositif à courant résiduel (RCD).
L’utilisation d’un RCD réduit le risque de
décharge électrique.
3) Sécurité personnelle
a) Restez vigilant, gardez un œil sur ce que
vous faites et utilisez votre sens commun
lors de l’utilisation d’un appareil électrique.
N’utilisez pas un appareil électrique si vous
20
FR
êtes fatigué ou si vous êtes sous l’inuence
de drogues, d’alcool ou si vous prenez des
médicaments. Un moment d’inattention lors
de l’utilisation des appareils électriques peut
entraîner des blessures graves.
b) Utilisez un équipement de protection
personnelle. Protégez vous toujours les
yeux. Les équipements de protection, tels
qu’un masque à poussière, des chaussures
antidérapantes, des protections auditives ou
un casque de sécurité, utilisés dans de bonnes
conditions, réduiront le risque de blessures.
c) Prévenez tout démarrage involontaire.
Assurez vous que l’interrupteur est sur la
position “arrêt avant de brancher l’appareil.
En effet, le transport des appareils électriques
en gardant vos doigts sur l’interrupteur, ou
le branchement de ces appareils en ayant
l’interrupteur sur “marche accidents.
d) Retirez les clés de réglage ou les clés de
vis de réglage avant d’allumer l’appareil
électrique. Une clé de vis de réglage ou une
clé, laissée sur une pièce en mouvement de
l’appareil électrique, peut entraîner des lésions
corporelles.
e) Ne pas se précipiter. Gardez toujours vos
pieds à plat et gardez votre équilibre. Ceci
permet de mieux contrôler l’appareil électrique
dans des situations imprévues.
f) Habillez vous convenablement. Ne portez
pas de vêtements lâches ou de boux.
Gardez vos cheveux, vêtements et gants
éloignés des pièces actionnées. En effet,
ces derniers peuvent être pris dans les pièces
en action.
g) Si les appareils sont fournis pour la
connexion des équipements d’évacuation
et de récupération de la poussière,
assurez vous que ces derniers soient
correctement connectés et utilisés.
L’utilisation de ces appareils peut réduire les
risques liès à la poussière.
h) Ne pensez pas être familiarisé avec l’outil
après l’avoir utilisé à de nombreuses
reprises, au point de ne plus rester vigilant
et d’en oublier les consignes de sécurité.
Toute action imprudente peut engendrer de
graves blessures en une fraction de seconde.
4) Utilisation et entretien d’un appareil
électrique
a) Ne forcez pas l’appareil électrique. Utilisez
l’appareil électrique adéquat pour votre
application. Un appareil électrique correc te
ment choisi assurera un meilleur travail et un
travail sans danger, au rythme auquel il a été
conçu.
b) N’utilisez pas l’appareil électrique si
l’interrupteur marche/arrêt ne fonctionne
pas. Un appareil électrique qui ne peut pas
être commandé par l’interrupteur de contrôle
est dangereux et doit être réparé.
c) Débranchez la prise du bloc d’alimentation
avant d’effectuer des réglages, de changer
des acces soires, ou de ranger les appreils
élec tri ques. Ces mesures de sécurité
préventives réduiront le risque de démarrage
involontaire de l’appareil électrique.
d) Rangez les appareils électriques arrêtés
hors de la portée des enfants et ne laissez
aucune personne, non familiarisée avec
l’outil ou ces instructions, utiliser l’appareil
électrique. Les appareils électriques sont
dangereux entre les mains d’utilisateurs non
formés.
e) Entretenez les appareils électriques.
Vériez tout défaut d’alignement et
l’enchaînement des pièces actionnées,
la rupture de ces dernières, et les
autres conditions qui peuvent affecter le
fonctionnement des appareils électriques.
En cas de dommages, faites réparer
l’appareil électrique avant de le réutiliser.
Nombreux sont les accidents provoqués par
des appareils électriques mal entretenus.
f) Veillez à garder les outils coupants aiguisés
et propres. Des outils coupants correctement
entretenus avec des lames aiguisées sont
moins susceptibles de se bloquer et sont plus
faciles à contrôler.
g) Utilisez l’appareil électrique, les
accessoires et les embouts, etc.,
conformément à ces instructions et de la
manière prévue pour le type spécique
de l’appareil électrique, en prenant en
compte les conditions de travail et le
travail à effectuer. L’utilisation de l’appareil
électrique dans des applications différentes
de celles prévues peut entraîner des situations
dangereuses.
h)
Gardez les poignées et les surfaces de
préhension sèches, propres et exemptes
1 / 1

Ferm CDM1146 Používateľská príručka

Kategória
Elektrické náradie
Typ
Používateľská príručka