Indesit WISE 127 X Instructions For Use Manual

Kategória
Práčky
Typ
Instructions For Use Manual
1
GB
English,1
Contents
Installation, 2-3
Unpacking and levelling, 2
Electric and water connections, 2-3
The first wash cycle, 3
Technical details, 3
Washing machine description, 4-5
Control panel, 4
Display, 5
MEMO Programme, 5
Starting and Programmes, 6
Briefly: how to start a programme, 6
Programme table, 6
Personalisations, 7
Setting the spin cycle, 7
Setting the Delay Timer, 7
Setting the temperature, 7
Functions, 7
Detergents and laundry, 8
Detergent dispenser, 8
Bleach cycle, 8
Preparing your laundry, 8
Special items, 8
Precautions and advice, 9
General safety, 9
Disposal, 9
Saving energy and respecting the environment, 9
Care and maintenance, 10
Cutting off the water or electricity supply, 10
Cleaning your appliance, 10
Cleaning the detergent dispenser, 10
Caring for your appliance door and drum, 10
Cleaning the pump, 10
Checking the water inlet hose, 10
Troubleshooting, 11
Service, 12
Before calling for Assistance, 12
WASHING MACHINE
WISE 127 X
Instructions for use
GB
Èeský,25
CZ
Slovenèina,13
SL
Românã,37
RO
Magyar,4 9
HU
2
GB
Keep this instruction manual in a safe place for
future reference. Should the appliance be sold,
transferred or moved, make sure the instruction
manual accompanies the washing machine to inform
the new owner as to its operation and features.
Read these instructions carefully: they contain vital
information on installation, use and safety.
Unpacking and levelling
Unpacking
1. Unpack the washing machine.
2. Check whether the washing machine has been
damaged during transport. If this is the case, do not
install it and contact your retailer.
3. Remove the 4
protective screws and
the rubber washer with
the respective spacer,
situated on the rear of
the appliance (see
figure).
4. Seal the gaps using the plastic plugs provided.
5. Keep all the parts: you will need them again if the
washing machine needs to be moved to another
location.
Packaging materials are not children's toys.
Levelling
1. Install the washing machine on a flat sturdy floor,
without resting it up against walls, furniture cabinets
or other.
2. If the floor is not
perfectly level, compen-
sate for any unevenness
by tightening or
loosening the adjustable
front feet (see figure);
the angle of inclination,
measured according to
the worktop, must not
exceed 2°.
Levelling your appliance correctly will provide it with
stability and avoid any vibrations, noise and shifting
during operation. If it is placed on a fitted or loose
carpet, adjust the feet in such a way as to allow
enough room for ventilation beneath the washing
machine.
Electric and water connections
Connecting the water inlet hose
1. Insert seal A into the
end of the inlet hose
and screw the latter
onto a cold water tap
with a 3/4 gas threaded
mouth (see figure).
Before making the
connection, allow the
water to run freely until
it is perfectly clear.
2. Connect the other end
of the water inlet hose to
the washing machine,
screwing it onto the
appliance's cold water
inlet, situated on the top
right-hand side on the
rear of the appliance
(see figure).
3. Make sure there are no kinks or bends in the hose.
The water pressure at the tap must be within the
values indicated in the Technical details table
(on the next page).
If the water inlet hose is not long enough, contact
a specialist store or an authorised serviceman.
Installation
A
3
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Connecting the drain hose
Connect the drain hose,
without bending it, to a
draining duct or a wall
drain situated between
65 and 100 cm from
the floor;
alternatively, place it
over the edge of a
basin, sink or tub,
fastening the duct
supplied to the tap (see
figure). The free end of
the hose should not be
underwater.
We advise against the use of hose extensions; in
case of absolute need, the extension must have the
same diameter as the original hose and must not
exceed 150 cm in length.
Electric connection
Before plugging the appliance into the mains
socket, make sure that:
the socket is earthed and in compliance with the
applicable law;
the socket is able to sustain the appliance's
maximum power load indicated in the Technical
details table (on the right);
the supply voltage is included within the values i
ndicated on the Technical details table
(on the right);
the socket is compatible with the washing
machine's plug. If this is not the case, replace
the socket or the plug.
The washing machine should not be installed in an
outdoor environment, not even when the area is
sheltered, because it may be very dangerous to
leave it exposed to rain and thunderstorms.
When the washing machine is installed, the mains
socket must be within easy reach.
Do not use extensions or multiple sockets.
The power supply cable must never be bent or
dangerously compressed.
The power supply cable must only be replaced by
an authorised serviceman.
Warning! The company denies all liability if and when
these norms are not respected.
The first wash cycle
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle with
detergent and no laundry, setting the 90°C
programme without a pre-wash cycle.
65 - 100 cm
Technical details
Model
WISE 127 X
Dimensions
59.5 cm wide
85 cm high
40 cm deep
Capacity
from 1 to 4,5 kg
Electric
connections
voltage 220/230 Volts 50 Hz
maximum absorbed power 1850 W
Water
connections
maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)
drum capacity 40 litres
Spin speed
up to 1200 rpm
Control
programmes
according to
IEC456 directive
programme 2; temperature 60°C;
run with a load of 4,5 kg.
This appliance is compliant with the
following European Community
Directives:
- 73/23/CEE of 19/02/73 (Low
Voltage) and subsequent amendments
- 89/336/CEE of 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments
- 2002/96/CE
4
GB
Control panel
Washing machine description
Control knob
Display
Detergent dispenser
SPIN
button
TEMPERATURE
button
START/STOP
button
START/RESET
button
Detergent dispenser to add detergent and fabric
softener (see page 8).
SPIN button to adjust the spin speed or exclude it
altogether (see page 7).
DELAY TIMER button to delay the start of the set
programme for a maximum period of 24 hours
(see page 7).
TEMPERATURE button to adjust the wash tempe-
rature (see page 7).
Display to programme the washing machine and
follow the wash cycle progress (see opposite page).
FUNCTION buttons: to select the functions
available. The button corresponding to the function
selected will remain on.
START/RESET button to start the programmes or
cancel any incorrect settings.
START/STOP button to turn the washing machine
on and off.
Control knob to select the wash programmes.
The knob stays still during the cycle.
DELAY TIMER
button
FUNCTION
Buttons
5
GB
Display
In addition to being a practical tool to programme your appliance (see page 7), the display provides useful
information concerning the wash cycle.
Once you have pressed the START/RESET button to
start the programme, the display will indicate the
amount of time left until the end of the wash cycle. If
a delayed start has been set (using the Delay Timer,
see page 7), the delay time will be indicated on the
display.
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Door lock:
If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To avoid
any damages, wait for the symbol to switch itself off before you open the appliance door.
At the end of the programme, the word END is displayed.
In the event of an anomaly, an error code will appear, such as: F-01, which should be communicated to the
Service Centre (see page 12).
"MEMO" Programme
This programme allows you to store your favourite or most-used wash cycle.
All you have to do is set the desired programme and, once it has started, turn the KNOB to position
; the
wash cycle will be stored automatically and the word MEMO appears on the display, flashing for a few seconds.
Subsequently, you can start the "MEMO" cycle by simply turning the KNOB to position
; you will be able to
see the temperature/spin cycle/delay timer values by pressing the corresponding buttons; you will also be able to
modify them but this variation will only be valid for the programme in progress and it will not be stored in the
"MEMO" cycle.
If you want to store a new wash cycle, repeat the above-mentioned operations.
6
GB
Type of fabric and
degree of soil
Programmes
Te m p e -
rature
Detergent
Fabric
softener
Stain removal
option/bleach
Cycle
length
(m inute s)
Description of wash cycle
pre-
wash
wash
Standard
Extremely soiled whites
(sheets, tablecloths, etc.)
1
90°C
135
Pre-wash, wash cycle, rinse cycles,
intermediate and final spin cycles
Extremely soiled whites
(sheets, tablecloths, etc.)
2
90°C
Delicate/
Traditional
125
Wash cycle, rinse cycles,
intermediate and final spin cycles
Heavily soiled whites and fast
colours
2
60°C
Delicate/
Traditional
110
Wash cycle, rinse cycles,
intermediate and final spin cycles
Heavily soiled whites and
delicate colours
2
40°C
Delicate/
Traditional
105
Wash cycle, rinse cycles,
intermediate and final spin cycles
Slightly soiled whites and
delicate colours (shirts,
jumpers, etc.)
3
40°C
Delicate/
Traditional
70
Wash cycle, rinse cycles,
intermediate and final spin cycles
Heavily soiled fast colours
(baby linen, etc.)
4
60
°C
Delicate
75
Wash cycle, rinse cycles, anti-
crease or delicate spin cycle
Heavily soiled fast colours
(baby linen, etc.)
4
40°C Delicate
60
Wash cycle, rinse cycles, anti-
crease or delicate spin cycle
Wool
5
40°C
50
Wash cycle, rinse cycles
,
anti-
crease and delicate spin cycle
Very delicate fabrics
(curtains, silk, viscose, etc.)
6
30°C
45
Wash cycle, rinse cycles, anti-
crease or draining cycle
Time 4 you
Heavily soiled whites and fast
colours
7
60°C
60
Wash cycle, rinse cycles,
intermediate and final spin cycles
Slightly soiled whites and
delicate colours (shirts,
jumpers, etc.)
8
40°C
50
Wash cycle, rinse cycles,
intermediate and final spin cycles
Delicate colours (all types of
slightly soiled garments)
9
40
°C

40
Wash cycle, rinse cycles,
delicate spin cycle
Delicate colours (all types of
slightly soiled garments)
10
30°C 30
Wash cycle, rinse cycles and
delicate spin cycle
Sport
Sports shoes
(MAX. 2 pairs)
11
30
°C
 50
Cold wash (without detergents),
wash cycle, rinse cycles, and
delicate spin cycle
Fabrics for sportswear
(Tracksuits, shorts, etc.)
12
30°C 60
Wash cycle, rinse cycles,
intermediate and final spin cycles
MEMO
Allows for any wash cycle to be stored
PARTIAL PROGRAMMES
Rinse
Delicate/
Traditional
Rinse cycles and spin cycle
Spin Draining and spin cycle
Drain Draining
Starting and Programmes
Programme table
Notes
-For programmes 7 and 8, we advise against exceeding a wash load of 3.5 kg.
-For programme 12 we advise against exceeding a wash load of 2 kg.
-For the anti-crease function: see Easy iron, opposite page. The information contained in the table is purely indicative.
Special programme
Daily (programme 10 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts
30 minutes and allows you to save on both time and energy. By setting this programme (10 at 30°C), you can wash
different fabrics together (except for woollen and silk items), with a maximum load of 3 kg.
We recommend the use of liquid detergent.
Briefly: starting a programme
1. Turn the washing machine on by pressing button .
2. Load your laundry into the washing machine and
shut the appliance door.
3. Set the knob to the desired programme. The
estimated duration of the selected programme is
displayed. The temperature and spin speed are
automatically set according to the programme
(to change them, see page 7).
4. Select any functions (see page 7).
5. Add the detergent and any fabric softener
(see page 8).
6. Start he programme by pressing the START/RESET
button.
To cancel it, keep the START/RESET button
pressed for at least 2 seconds.
7. When the programme has ended, the word END is
displayed. Take out your laundry and leave the
appliance door ajar to allow the drum to dry
thoroughly.
8. Turn the washing machine off by pressing button
.
(see page 5).
7
GB
Function Effect Comments
Enabled with
programmes:
Stain
removal
Bleaching cycle
designed to
remove the
toughest stains.
Please remember to pour the bleach into extra compartment 4
(se
e page 8)
.
This function is incompatible with the EASY IRON function.
2, 3, 4,
Rinse cycle.
Extra Rinse
Increases the
efficiency of the
rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
1, 2, 3, 4, 7,
8, 9, 11, 12,
Rinse cycle.
Easy iron
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
When this function is set, programmes 4, 5, 6 will end, with the
laundry left to soak (Anti-crease), and the relative button flashes:
- to conclude the cycle, press the START/RESET button or the
EASY IRON button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
This function is incompatible with the STAIN REMOVAL function.
3, 4, 5, 6, 7, 8,
9, Rinse
cycle.
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the spin cycle
If, when the appliance is switched on, the KNOB is positioned on
a programme with a spin cycle, a fixed
appears. Press button
and the maximum spin speed allowed for the programme set
will be displayed, and the
icon flashes. Press it again and the
values lower until they reach OFF, which indicates that the spin
cycle has been excluded (press it again to go back to the
maximum value); stop on the desired speed, after approximately
2 seconds the setting is accepted: the symbol
remains fixed.
The spin cycle setting is enabled with all the programmes except
for 6 and the Draining cycle.
Setting the Delay Timer
Press the button and you will see the word OFF on the
display, while the relative symbol flashes.
Press the button again and "1h" appears, that is, a delay of one
hour (this can reach up to 24h); stop on the "desired" delay; after
approximately 2 seconds the setting is accepted, following which,
the time for the set programme appears on the display and the
symbol
remains on.
If you now press the START/RESET button, the set "delay"
appears; this decreases every hour until the start of the cycle. In
this phase, the "delay" can only be modified by decreasing it.
The Delay Timer regulation is enabled with all programmes.
Setting the temperature
If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature needs
to be regulated, a fixed
appears. Press button and the maximum temperature allowed for the programme set
will be displayed and the
icon flashes. Press it again and the temperature lowers until it reaches OFF, which
indicates a cold wash cycle (press it again to go back to the maximum value); stop on the desired value, after
approximately 2 seconds the setting is accepted: the symbol
remains fixed.
The temperature adjustment is enabled with all wash programmes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
If you set a function that is incompatible with another function you selected previously, only the last one selected
will be enabled.
FUNCTION buttons
8
GB
Detergent dispenser
Good washing results also depend on the correct
dose of detergent: adding too much detergent won't
necessarily make for a more efficient wash, and may
in fact cause build up on the interior of your
appliance and even pollute the environment.
Open up the detergent
dispenser and pour in
the detergent and fabric
softener, as follows.
compartment 1: Detergent for pre-wash
(powder)
Before pouring in the detergent, make sure that
extra compartment 4 has been removed.
compartment 2: Detergent for the wash cycle
(powder or liquid)
Liquid detergent should only be poured in
immediately prior to the wash cycle start.
compartment 3: Additives (fabric softeners, etc.)
The fabric softener should not overflow from the grid.
extra compartment 4: Bleach
Do not use hand wash detergent because it may
form too much foam.
Bleach cycle
Traditional bleach should be used on sturdy
white fabrics, and delicate bleach for coloured
fabrics, synthetics and for wool.
Place extra
compartment 4,
provided, into
compartment 1.
When pouring in the
bleach, be careful not to
exceed the "max" level
indicated on the central
pivot (see figure).
To run the bleach cycle alone, pour the bleach into extra
compartment 4, set the Rinse programme
and
enable the Stain removal function (see page 7).
To bleach during a wash cycle, pour in the detergent
and fabric softener, set the desired programme and
enable the Stain removal function (see page 7).
The use of extra compartment 4 excludes the
possibility of using the pre-wash cycle.
Preparing your laundry
Divide your laundry according to:
- the type of fabric/the symbol on the label.
- the colours: separate coloured garments from
whites.
Empty all pockets and check for loose buttons.
Do not exceed the weight limits stated below,
which refer to the weight when dry:
Sturdy fabrics: max 4,5 kg
Synthetic fabrics: max 2.5 kg
Delicate fabrics: max 2 kg
Wool: max 1 kg
How much does your laundry weigh?
1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1,200 g
1 towel 150-250 g
Special items
Curtains: fold curtains and place them in a pillow
case or mesh bag. Wash them separately without
exceeding half the appliance load. Use programme 6
which excludes the spin cycle automatically.
Quilted coats and windbreakers: if they are
padded with goose or duck down, they can be
machine-washed. Turn the garments inside out and
load a maximum of 2-3 kg, repeating the rinse cycle
once or twice and using the delicate spin cycle.
Wool: for best results, use a specific detergent,
taking care not to exceed a load of 1 kg.
Detergents and laundry
1
2
3
4
9
GB
Precautions and advice
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
The washing machine was designed and built in
compliance with the applicable international safety
regulations. The following information is provided for
your safety and should consequently be read carefully.
General safety
This appliance has been designed for non-
professional, household use and its functions must
not be changed.
This washing machine should only be used by
adults and in accordance with the instructions
provided in this manual.
Never touch the washing machine when barefoot
or with wet or damp hands or feet.
Do not pull on the power supply cable to unplug
the appliance from the electricity socket. Pull the
plug out yourself.
Do not open the detergent dispenser while the
appliance is in operation.
Do not touch the drain water as it could reach
very high temperatures.
Never force the washing machine door: this could
damage the safety lock mechanism designed to
prevent any accidental openings.
In the event of a malfunction, do not under any
circumstances touch internal parts in order to
attempt repairs.
Always keep children well away from the
appliance while in operation.
The appliance door tends to get quite hot during
the wash cycle.
Should it have to be moved, proceed with the
help of two or three people and handle it with the
utmost care. Never try to do this alone, because
the appliance is very heavy.
Before loading your laundry into the washing
machine, make sure the drum is empty.
Disposal
Disposing of the packaging material:
observe local regulations, so the packaging can
be re-used.
The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment, requires that
old household electrical appliances must not be
disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected
separately in order to optimise the recovery and
recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the
product reminds you of your obligation, that when
you dispose of the appliance it must be separately
collected.
Consumers should contact their local authority or
retailer for information concerning the correct
disposal of their old appliance.
Saving energy and respecting the
environment
Environmentally-friendly technology
If you only see a little water through your appliance
door, this is because thanks to the latest Indesit
technology, your washing machine only needs less
than half the amount of water to get the best results:
an objective reached to respect the environment.
Saving on detergent, water,
energy and time
To avoid wasting resources, the washing machine
should be used with a full load. A full load instead of
two half loads allows you to save up to 50% on energy.
The pre-wash cycle is only necessary on
extremely soiled garments. Avoiding it will save on
detergent, time, water and between 5 and 15%
energy.
Treating stains with a stain remover or leaving them
to soak before washing will cut down the need to
wash them at high temperatures. A programme at
60°C instead of 90°C or one at 40°C instead of
60°C will save up to 50% on energy.
Use the correct quantity of detergent depending
on the water hardness, how soiled the garments
are and the amount of laundry you have, to avoid
wastage and to protect the environment: despite
being biodegradable, detergents do contain
ingredients that alter the natural balance of the
environment. In addition, avoid using fabric
softener as much as possible.
If you use your washing machine from late in the
afternoon until the early hours of the morning, you
will help reduce the electricity board's peak load.
The Delay Timer option (see page 7) helps to
organise your wash cycles accordingly.
If your laundry has to be dried in a tumble dryer,
select a high spin speed. Having the least water
possible in your laundry will save you time and
energy in the drying process.
10
GB
Care and maintenance
Cutting off the water or electricity
supply
Turn off the water tap after every wash. This will
limit the wear of your appliance's water system
and also prevent leaks.
Unplug your appliance when cleaning it and
during all maintenance operations.
Cleaning your appliance
The exterior and rubber parts of your appliance can
be cleaned with a soft cloth soaked in lukewarm
soapy water. Do not use solvents or abrasives.
Cleaning the detergent dispenser
Remove the dispenser
by pulling it out (see
figure).
Wash it under running
water; this operation
should be repeated
frequently.
Caring for your appliance door and
drum
Always leave the appliance door ajar to prevent
unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning
pump that does not require any maintenance.
Sometimes, small items (such as coins or buttons)
may fall into the pre-chamber that protects the
pump, situated in the lower part of the same.
Make sure the wash cycle has ended and unplug
the appliance.
To access the pre-chamber:
1. using a screwdriver,
remove the cover panel
on the lower front of the
washing machine (see
figure);
2. unscrew the lid
rotating it anti-
clockwise (see figure): a
little water may trickle
out. This is perfectly
normal;
3. clean the interior thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are
securely in place before you push it onto the
appliance.
Checking the water inlet hose
Check the water inlet hose at least once a year. If
you see any cracks, replace it immediately: during
the wash cycles, water pressure is very strong and
a cracked hose could easily split open.
Never use hoses that have already been used.
11
GB
Your washing machine could fail to work. Before calling for Assistance (see page 12), make sure the problem
can't easily be solved by consulting the following list.
Troubleshooting
Problem
The washing machine won't
start.
The wash cycle won't start.
The washing machine fails to
load water (The wording H2O is
displayed).
The washing machine
continuously loads and unloads
water.
The washing machine does not
drain or spin.
The washing machine vibrates
too much during the spin cycle.
The washing machine leaks.
There is too much foam.
Possible causes/Solution:
The appliance is not plugged into the socket, or not enough to
make contact.
There has been a power failure.
The appliance door is not shut properly (the word DOOR is
displayed).
The
button has not been pressed.
The START/RESET button has not been pressed.
The water tap is not turned on.
A delayed start has been set (using the Delay Timer, see page 7).
The water inlet hose is not connected to the tap.
The hose is bent.
The water tap is not turned on.
There is a water shortage.
The water pressure is insufficient.
The START/RESET button has not been pressed.
The drain hose is not fitted between 65 and 100 cm from the floor
(see page 3).
The free end of the hose is underwater (see page 3).
The wall drainage system doesn't have a breather pipe.
If the problem persists even after these checks, turn off the water tap,
switch the appliance off and call for Assistance. If the dwelling is on one of
the upper floors of a building, there may be drain trap problems causing the
washing machine to load and unload water continuously. In order to avoid
such an inconvenience, special anti-drain trap valves are available in shops.
The programme does not foresee the draining: some programmes
require enabling the draining manually (see page 6).
The Easy iron option is enabled: to complete the programme, press
the START/RESET button (see page 7).
The drain hose is bent (see page 3).
The drain duct is clogged.
The drum was not unblocked correctly during installation (see page 2).
The washing machine is not level (see page 2).
The washing machine is closed in between furniture cabinets and
the wall (see page 2).
The water inlet hose is not screwed on correctly (see page 2).
The detergent dispenser is obstructed (to clean it, see page 10).
The drain hose is not secured properly (see page 3).
The detergent is not suitable for machine washing (it should bear
the definition "for washing machines" or "hand and machine wash",
or the like).
You used too much detergent.
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
12
GB
Before calling for Assistance:
Check whether you can solve the problem on your own (see page 11);
Restart the programme to check whether the problem has been solved;
If this is not the case, contact an authorised Technical Service Centre on the telephone number
provided on the guarantee certificate.
Always request the assistance of authorised servicemen.
Notify the operator of:
the type of problem;
the appliance model (Mod.);
the serial number (S/N).
This information can be found on the data plate situated on the rear of the washing machine.
Service
Service
13
SL
Slovenèina
Vsebina
Namestitev, 14-15
Odstranitev embalae in izravnavanje, 14
Prikljuèitev na vodovodno in elektrièno napeljavo, 14-15
Prvo pranje, 15
Tehnièni podatki, 15
Opis pralnega stroja, 16-17
Upravljalna ploèa, 16
Prikazovalnik, 17
Program MEMO, 17
Zagon in razlièni pralni programi, 18
Na kratko: kako zagnati program pranja, 18
Tabela pralnih programov, 18
Posebne nastavitve, 19
Nastavitev centrifuge, 19
Funkcija delay timer, 19
Nastavitev temperature, 19
Funkcije, 19
Pralna sredstva in perilo, 20
Predal za pralna sredstva, 20
Pranje z belilom, 20
Priprava perila, 20
Posebne vrste perila, 20
Opozorila in nasveti, 21
Varnost, 21
Ravnanje z odpadnim materialom, 21
Varèevanje in skrb za okolje, 21
Vzdrevanje in èièenje, 22
Odklop vodovodne in elektriène napeljave, 22
Èièenje pralnega stroja, 22
Èièenje predala za pralna sredstva, 22
Vzdrevanje vratc in bobna, 22
Èièenje èrpalke, 22
Pregled cevi za dotok vode, 22
Motnje in njihovo odpravljanje, 23
Pomoè, 24
Preden poklièete pooblaèeni servis, 24
SL
PRALNI STROJ
WISE 127 X
Navodila za uporabo
14
SL
Shranite to knjiico, da jo boste lahko po potrebi
uporabili. Èe boste pralni stroj prodali, ga nehali
uporabljati ali premestili drugam, naj bo knjiica pri
njem, tako da se bo novi lastnik lahko seznanil z
delovanjem in ustreznimi opozorili.
Pozorno preberite navodila. Našli boste pomembne
informacije glede namestitve, uporabe in
zagotavljanja varnosti.
Odstranitev embalae in izravnavanje
Odstranitev embalae
1. Odstranite embalao
2. Preverite, da ni bil pralni stroj med prevozom
pokodovan. Èe je pokodovan, ga ne prikljuèite,
ampak obvestite prodajalca.
3. Odstranite vse 4
zaèitne vijake in
gumico z distanènikom
na zadnji strani (glej
sliko).
4. S priloenimi plastiènimi èepi zaprite odprtine.
5. Vse odstranjene dele shranite. Èe bo pralni stroj
potrebno prevaati, jih bo treba spet namestiti.
Embalaa ni primerna kot igraèa za otroke
Izravnavanje
1. Pralni stroj namestite na ravna in trda tla. Naj se
ne dotika sten, pohištva ipd.
2. Èe tla niso
popolnoma vodoravna, z
odvijanjem ali
zavijanjem prednjih
noic uravnajte lego
pralnega stroja (glej
sliko). Nagib na delovni
površini ne sme
presegati 2°.
Natanèno izravnanje poveèa stabilnost pralnega
stroja in prepreèuje vibracije, hrup in premikanje
med delovanjem. Èe je na tleh tapison ali preproga,
uravnajte noice tako, da bo pod pralnim strojem
ostalo nekaj prostora za prezraèevanje.
Prikljuèitev na vodovodno in elektrièno
napeljavo
Prikljuèitev dotoène cevi za vodo
1. Vstavite tesnilo A na
konec dotoène cevi; cev
privijte na pipo za dotok
hladne vode s ¾
navojem (glej sliko).
Predtem pustite teèi
vodo, dokler ne bo
èista.
2. Dotoèno cev privijte
na ustrezen prikljuèek
na zadnji strani
pralnega stroja zgoraj
desno (glej sliko).
3. Pazite, da cev ne bo prepognjena ali stisnjena.
Vodni tlak v pipi mora biti v mejah vrednosti, ki so
zapisane v tabeli tehniènih podatkov (glej naslednjo
stran).
Èe dotoèna cev ni dovolj dolga, se obrnite na
specializirano trgovino ali na pooblaèeni servis.
Namestitev
A
15
SL
Namestitev odtoène cevi
Odtoèno cev, ki ne sme
biti prepognjena,
prikljuèite na odtoèni
sistem ali na odtok na
zidu, ki sta v viini 65 -
100 cm od tal;
ali jo naslonite na rob
umivalnika ali korita; s
priloenim vodilom jo
pritrdite na pipo (glej
sliko). Prosti konec
odtoène cevi ne sme
biti potopljen v vodo.
Odsvetujemo uporabo podaljka za odtoèno cev.
Èe je to nujno, naj ima podaljek isti premer in naj
ne bo dalji od 150 cm.
Prikljuèitev na elektrièno napeljavo
Preden pralni stroj prikljuèite na elektrièno
napeljavo, se preprièajte, èe:
je elektrièni prikljuèek ozemljen in neoporeèen;
elektrièni prikljuèek zmore najveèjo obremenitev
moèi pralnega stroja, ki je zapisana v tabeli
tehniènih podatkov (glej poleg);
elektrièna napetost v vtiènici ustreza vrednostim v
tabeli tehniènih podatkov (glej poleg);
vtiènica ustreza vtikaèu pralnega stroja. V
nasprotnem primeru je treba zamenjati vtiènico
ali vtikaè.
Pralni stroj ne sme biti nameèen na prostem
(èeprav je pod streho), saj ga je zelo nevarno
izpostavljati deju in nevihtam.
Ko je pralni stroj nameèen, naj bo vtiènica lahko
dosegljiva.
Ne uporabljajte podaljškov in razdelivcev.
Kabel naj ne bo prepognjen ali stisnjen.
Elektrièni kabel lahko zamenja le pooblaèeni
serviser.
Pozor! V primeru neupotevanja teh navodil nae
podjetje ne sprejema nobene odgovornosti.
Prvo pranje
Po prikljuèitvi in pred uporabo zaenite prvo pranje z
detergentom in brez perila. Prvo pranje naravnajte
na 90°C brez predpranja.
PomoèMotnjeOpozorila VzdrevanjeProgrami Pralna sredstvaNamestitev Opis
65 - 100 cm
Tehnièni podatki
Model
WISE 127 X
Dimenzije
irina 59,5 cm
viina 85 cm
globina 40 cm
Zmogljivost
1 - 4,5 kg
Elektrièna napeljava
napetost 220/230 V, 50 Hz
maksimalna poraba moèi 1850 W
Vodovodni prikljuèek
najveèji dovoljeni tlak 1 MPa (10 b)
najmanji dovoljeni tlak 0,05 MPa (0,5 b)
prostornina bobna 40 litrov
Hitrost centrifuge
do 1200 vrtljajev na minuto
Kontrolni program
po standardu IEC456
program 2; temperatura 60°C;
z obremenitvijo 4,5 kg.
Pralni stroj je izdelan v skladu z
veljavnimi mednarodnimi predpisi:
- EEC 73/23 z dne 19.2.1973 (Nizka
napetost) s kasnejimi spremembami
- EEC 89/336 z dne 3.5.1989
(Elektromagnetna kompatibilnost)
s kasnejimi spremembami
- 2002/96/CE
16
SL
Upravljalna ploèa
Opis pralnega stroja
Gumb
Prikazovalnik
Predal za pralna sredstva
Tipka
CENTRIFUGA
Tipka
TEMPERATURA
Tipka
VKLOP/IZKLOP
Tipka
START/RESET
Predal za pralna sredstva za odmerjanje
detergentov in dodatkov (glej str. 20).
Tipka CENTRIFUGA za nastavitev hitrosti
centrifuge ali njen izklop (glej str. 19).
S tipko DELAY TIMER lahko zakasnimo zaèetek
pranja in sicer za najveè 24 ur (glej str. 19).
Tipka TEMPERATURA za nastavitev temperature
pranja (glej str. 19).
Prikazovalnik za nastavitev pralnega programa in
spremljanje poteka pranja (glej naslednjo stran).
Tipke FUNKCIJ: za nastavitev razpololjivih funkcij.
Tipka za izbrano funkcijo bo ostala prigana.
Tipka START/RESET za zagon programov ali izbris
napaènih nastavitev.
Tipka VKLOP/IZKLOP za vklop in izklop pralnega
stroja.
Gumb za izbiranje programov.
Med potekom pranja se gumb ne premika.
Tipka
DELAY TIMER
Tipke
FUNKCIJ
17
SL
PomoèMotnjeOpozorila VzdrevanjeProgrami Pralna sredstvaNamestitev Opis
Prikazovalnik
Prikazovalnik slui za programiranje pranja (glej str. 19), poleg tega pa nas tudi sproti obveèa o poteku pranja.
Ko pritisnemo na tipko START/RESET za zagon
pralnega programa, se na prikazovalniku pokae
èas, ki bo potreben do konca pranja. Èe je
nastavljena zakasnitev zaèetka pranja, bo to
prikazano (Delay Timer, glej str. 19)
Vratca so blokirana:
Prigani znak pomeni: vratca so blokirana, da jih ne bi pomotoma odprli. Preden odprete vratca, morate
poèakati, da znak ugasne, sicer lahko pride do pokodb.
Na koncu pranja se pokae napis END.
Èe pride do nepravilnosti, se pokae koda napake, na primer F-01. Kodo napake sporoèimo na pooblaèeni
servis (glej str. 24).
Program MEMO
S to funkcijo lahko shranimo v spomin pralni program, ki ga najraje ali najpogosteje uporabljamo.
Nastavimo eljeni program, ga zaenemo in nato zavrtimo GUMB na poloaj
. Pralni program se bo
samodejno shranil v spomin in na prikazovalniku se bo za nekaj trenutkov pokazal utripajoèi napis MEMO.
Kasneje lahko ta v spomin shranjeni program MEMO zaenemo preprosto tako, da GUMB zavrtimo na
poloaj
; s pritiskom na ustrezne tipke boste lahko preverili nastavljene vrednosti temperature, centrifuge
in zakasnitve zaèetka pranja; te vrednosti boste lahko tudi spremenili, pri tem pa bodo spremembe veljale le
za tekoèi pralni program in ne bodo shranjene v spomin (v program MEMO).
Èe elite v spomin shraniti drug pralni program, ponovite zgoraj opisani potek.
18
SL
Lastnosti tkanine in stopnja
umazanosti
Program
Tempe-
ratura
Detergent
Meh
è
alec
Uporaba
belila
Trajanje
programa
(v minutah)
Potek programa
predp-
ranje
pranje
Standardno perilo
Belo perilo, zelo moèno umazano
(rjuhe, prti ipd.)
1
90°C

135
Predpranje, pranje, izpiranje,
vmesno in konèno zemanje
Belo perilo, zelo moèno umazano
(rjuhe, prti ipd.)
2
90°C

ne
¡z
no /
navadno
125
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
B elo perilo in vzdr¡zljivo barvno
perilo, moèno umazano
2
60°C

ne
¡z
no /
navadno
110
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
Belo in obèutljivo barvno perilo,
moèno umazano
2
40°C

ne
¡z
no /
navadno
105
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
Malo umazano belo perilo in
obèutljivo barvno perilo
(srajce, majice ipd.)
3
40°C

ne
¡z
no /
navadno
70
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
V zdr¡zljivo barvno perilo, moèno
umazano (oblaèila za dojenèke ipd.)
4
60
°C
ne
¡z
no
75
Pranje, izpiranje, mehèanje
ali blago o
¡z
emanje
Vzdr
¡z
ljivo barvno perilo, moèno
umazano (oblaèila za dojenèke ipd.)
4
40°C
ne
¡z
no
60
Pranje, izpiranje, mehèanje ali
blago o
¡z
emanje
Volna
5
40°C

50
Pranje, izpiranje
,
mehèanje in
blago o
¡z
emanje
Zelo obèutljive tkanine (zavese,
svila, viskoza ipd.)
6
30°C

45
Pranje, izpiranje, mehèanje ali
izpraznitev
Time 4 you
B elo perilo in vzdr¡zljivo barvno
perilo, moèno umazano
7
60°C

60
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
Malo umazano belo perilo in obèutljivo
barvno perilo (srajce, majice ipd.)
8
40°C

50
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
O bèutljivo barvno perilo
(malo umazano perilo vseh vrst)
9
40
°C

40
Pranje, izpiranje in blago
o
¡z
emanje
O bèutljivo barvno perilo
(malo umazano perilo vseh vrst)
10
30°C
 30
Pranje, izpiranje in blago
o
¡z
emanje
portna oblila
portne copate
(maksimalno 2 para.)
11
30
°C
 50
Pranje brez detergenta, pranje,
izpiranje in blago o¡zemanje
Tkanine portnih oblaèil (trenirke,
nogavice ipd.)
12
30°C
 60
Pranje, izpiranje, vmesno in
konèno o
¡z
emanje
MEMO
Omogoèa shranitev v spomin kateregakoli pralnega programa
DELNI PROGRAMI
Izpiranje
ne
¡z
no /
navadno
Izpiranje in o
¡z
emanje
O
¡z
emanje Izpraznitev in o
¡z
emanje
Izpraznitev Izpraznitev
Zagon in razlièni pralni programi
Tabela pralnih programov
Na kratko: kako zagnati program pranja
1. Prigite pralni stroj s pritiskom na tipko .
2. Perilo dajte v pralni stroj in zaprite vratca.
3. Z gumbom nastavite eljeni program. Na
prikazovalniku se bo pokazal predvideni èas
pranja. Temperatura in hitrost centrifuge se
samodejno naravnata glede na izbrani program (za
spremembo nastavitve glej str. 19).
4. Izberite funkcije po elji (glej str. 19).
5. Vstavite detergent in dodatke (glej str. 20).
6. Poenite program s pritiskom na tipko START/
RESET.
Za preklic drite tipko START/RESET najmanj 2
sekundi.
7. Ob zakljuèku programa se pokae napis END.
Perilo vzemite ven, vratca pa pustite priprta, da
se boben osui.
8. Ugasnite pralni stroj s pritiskom na tipko
.
Opombi
-Pri programih 7 - 8 je priporoèljiva manja kolièina perila: ne veè kot 3,5 kg.
-Pri programu 12 je priporoèljivo, da perilo v pralnem stroju ne presega 2 kg.
-Podatki v tej tabeli so zgolj informativni. Za opis postopka proti meèkanju glej tabelo na naslednji strani.
Posebni program
Polurni program (program 10 za sintetiko) je posebej prilagojen za pranje manj umazanega perila v èim
krajem èasu: traja samo 30 minut in tako prihrani energijo in èas. S tem programom (program 10 pri 30°C)
je mogoèe prati skupaj razliène tkanine (razen volne in svile), ki skupaj ne smejo tehtati veè kot 3 kg.
Pri tem programu priporoèamo uporabo tekoèega detergenta.
(glej str. 17).
19
SL
Posebne nastavitve
PomoèMotnjeOpozorila VzdrevanjeProgrami Pralna sredstvaNamestitev Opis
Nastavitev centrifuge
Èe je ob vkljuèitvi pralnega stroja GUMB naravnan na program,
ki omogoèa nastavitev hitrosti centrifuge, znak
miruje (ne
utripa). Ob pritisku na tipko
se pokae maksimalna hitrost
centrifuge, ki jo nastavljeni program omogoèa; znak
pri tem
utripa. Z nadaljnjim pritiskanjem se hitrost centrifuge zniuje
vse do napisa OFF, ki oznaèuje izklop centrifuge (ob ponovnem
pritisku se spet pokae maksimalna vrednost). Ustavite se pri
eljeni hitrosti; po priblino dveh sekundah bo izbira sprejeta:
znak
bo obmiroval. Hitrost centrifuge je mogoèe uravnavati
pri vseh programih, razen pri programih 6 in izèrpanje vode.
Funkcija delay timer
Ob pritisku na tipko se bo na prikazovalniku pokazal napis
OFF, ustrezni znak pa bo utripal.
Ob ponovnem pritisku se na prikazovalniku pokae napis 1h,
to je zakasnitev za eno uro, in tako naprej vse do 24h. Ustavite
se pri eljeni zakasnitvi; po priblino dveh sekundah bo izbira
sprejeta: na prikazovalniku se bo pokazala èas zakasnitve
pralnega programa in znak
bo obmiroval.
Ob pritisku na tipko START/RESET se bo sedaj pokazal èas
zakasnitve, ki se bo zmanjeval vsako uro vse do zagona pranja. V tej fazi je zakasnitev mogoèe
spremeniti le v smer manje zakasnitve. Funkcijo Delay Timer je mogoèe uporabiti za vse pralne programe.
Nastavitev temperature
Èe je ob vkljuèitvi pralnega stroja GUMB naravnan na program, ki omogoèa nastavitev temperature, znak
miruje (ne utripa). Ob pritisku na tipko se pokae maksimalna temperatura, ki jo nastavljeni program
omogoèa; znak
pri tem utripa. Z nadaljnjim pritiskanjem se temperatura zniuje vse do napisa OFF, ki
oznaèuje pranje s hladno vodo (ob ponovnem pritisku se spet pokae maksimalna temperatura). Ustavite se
pri eljeni temperaturi; po priblino dveh sekundah bo izbira sprejeta: znak
bo obmiroval.
Temperaturo je mogoèe uravnavati pri vseh pralnih programih.
Funkcije
Pralni stroj omogoèa razliène funkcije za doseganje takne stopnje èistosti, kakrno elite. Za izbiro
posameznih funkcij:
1. pritisnite tipko za ustrezno funkcijo (glej spodnjo tabelo);
2. prigana tipka pomeni, da je funkcija aktivirana.
Pozor: Hitro utripanje tipke oznaèuje, da funkcija ni zdruljiva z izbranim programom.
Èe boste izbrali dve med seboj nezdruljivi funkciji, bo aktivirana samo tista, ki ste jo izbrali nazadnje.
Funkcije inek Opombe za uporabo
Na
razpolago:
Belilo
Postopek pranja z
belilom za odstranitev
trdovratnih made±zev.
Ne pozabite dati belila v dodatno posodico 4
(glej str.
20).
Ni zdruzljivo s funkcijo
Postopek proti mehèanju
.
pri
programih
2, 3, 4,
"izpiranje"
Dodatno
izpiranje
Poveèa uèinek
izpiranja.
Priporoèljivo pri maksimalni obremenitvi (5 kg) pralnega stroja ali pri
veèjih odmerkih detergenta.
pri
programih
1, 2, 3, 4,
7, 8, 9, 11, 12,
"izpiranje"
Postopek
proti
meèkanju
Ublzi meèkanje
tkanin in tako olaja
likanje.
Ob nastavitvi te funkcije se programi 4, 5, 6 prekinejo v fazi mehèanja
perila (postopek proti meèkanju); pri tem ustrezni znak utripa.
- za dokonèanje pranja pritisnite na tipko START/RESET ali na
funkcijo
Postopek proti mehèanju
.;
- èe ±zelite tu koati program, naravnajte gumb na znak in pritisnite
na tipko START/RESET.
Ni zdruzljivo s funkcijo
Belilo.
pri
programih
3, 4, 5, 6,
7, 8, 9,
"izpiranje"
Tipke FUNKCIJ
20
SL
Predal za pralna sredstva
Dobri uèinki pranja so odvisni tudi od pravilnega
odmerjanja pralnih sredstev. Èe z njimi pretiravamo,
perilo ni niè bolje oprano, poveèamo pa verjetnost
nastajanja usedlin v pralnem stroju in
onesnaevanje okolja.
Odprite predal za pralna
sredstva in v
posamezne prekate
dajte detergent oziroma
dodatke po naslednjih
navodilih:
Prekat 1: detergent za predpranje (v prahu)
Preden odmerite ustrezno kolièino detergenta, se
preprièajte, da v prekat ni vstavljena dodatna
posodica 4.
Prekat 2: detergent za pranje (v prahu ali tekoèini)
Tekoèi detergent smemo vliti v prekat le neposredno
pred pranjem.
Prekat 3: dodatki (mehèalec idr.)
Mehèalec naj se ne izliva preko reetke prekata.
Dodatna posodica 4: belilo
Ne uporabljajte detergentov za roèno pranje, ker se
preveè penijo.
Pranje z belilom
Navadno belilo uporabljamo za bele in vzdrljive
tkanine, neno belilo pa za barvne, sintetiène in
volnene tkanine.
Priloeno dodatno
posodico 4 vstavite v
prekat 1.
Belilo naj ne presega
oznake max na
stebrièku (glej sliko).
Èe elite opraviti zgolj pranje z belilom, dajte belilo v
dodatno posodico 4, naravnajte program izpiranje
in vkljuèite monost belilo (glej str. 19). Èe elite
uporabiti belilo kot dodatek med sicernjim potekom
pranja, dajte detergent in dodatke v ustrezne prekate,
izberite eljeni program in vkljuèite monost belilo
(glej str. 19).
Uporaba dodatne posodice 4 ni zdruljiva s predpranjem.
Priprava perila
Perilo razvrstite po:
- vrsti tkanine / znaku na etiketi.
- barvi: loèite barvno perilo od belega perila.
Izpraznite epe in preglejte gumbe.
Ne obremenite pralnega stroja preko navedene
tee suhega perila:
Vzdrljive tkanine: najveè 4,5 kg
Sintetiène tkanine: najveè 2,5 kg
Obèutljive tkanine: najveè 2 kg
Volna: najveè 1 kg
Koliko tehta perilo?
1 rjuha 400-500 gr.
1 prevleka za blazino 150-200 gr.
1 prt 400-500 gr.
1 kopalni plaè 900-1.200 gr.
1 brisaèa 150-250 gr.
Posebne vrste perila
Zavese: Namestite jih v prevleko ali mreasto vreèo.
Perite jih posebej, njihova tea pa naj ne presega
poloviène obremenitve. Uporabite program 6, ki
samodejno izkljuèi oemanje.
Pernice in bunde s puhom: Èe je polnilo iz gosjega
ali raèjega perja, je mono pranje v pralnem stroju.
Oblaèila obrnite. Perila naj ne bo veè kot 2-3 kg.
Ponovno izpiranje vkljuèite e enkrat ali dvakrat in
uporabite neno oemanje.
Volna: Za bolji uèinek uporabite poseben
detergent za volno. Perila naj ne bo veè kot 1 kg.
Pralna sredstva in perilo
1
2
3
4
1 / 1

Indesit WISE 127 X Instructions For Use Manual

Kategória
Práčky
Typ
Instructions For Use Manual

V iných jazykoch