Panasonic KXTG9120FX Návod na používanie

This unit is compatible with Caller ID and SMS. To use these

features, you must subscribe to the appropriate service of your

service provider/telephone company.

Charge the batteries for about 7 hours before initial use.

This unit is designed to be used in Czech, Slovakia, Turkey, and central Europe. To

use this unit in your country, first change the unit’s region setting to match your

country (page 35). Change the unit’s display language as needed (page 14).

Please read these operating instructions before using the unit and save them for

future reference.

(For Czech and Slovakia)

This cordless telephone is possible to use according to General licence No.:

VO-R/8/08.2005-23 (for Czech), VPR-7/2001 (for Slovakia).

Operating Instructions

Model No. KX-TG9120FX

Digital Cordless Answering System

Contents/Obsah/

İçindekiler

English instructions

Türkçe talimatlar

Appendix/Dodatek/Príloha/Ek

Page/Strana/Str./Sayfa

1

–

68

(1)

–

(64)

<1>

–

<68>

((1))

–

((64))

[1]

–

[8]

Pokyny v češtině

Pokyny v sloven

č

ine

TG9120FX(e).book Page 1 Tuesday, August 29, 2006 9:44 AM

Introduction

2

Introduction

Thank you for purchasing a new Panasonic digital cordless phone.

For your future reference

Attach or keep original receipt to assist with any repair under warranty.

Note:

L In the event of problems, you should contact your equipment supplier in the first instance.

Declaration of Conformity:

L Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the

essential requirements and other relevant provisions of Radio & Telecommunications

Terminal Equipment (R&TTE) Directive 1999/5/EC.

Declarations of Conformity for the relevant Panasonic products described in this manual

are available for download by visiting:

http://www.doc.panasonic.de

Contact:

Panasonic Services Europe

a Division of Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Trademarks:

L Eatoni and LetterWise are trademarks of Eatoni Ergonomics, Inc.

L Skype, SkypeIn, SkypeOut and the S logo are trademarks of Skype Limited.

Serial No. (found on the bottom of the base unit)

Date of purchase

Name and address of dealer

TG9120FX(e).book Page 2 Tuesday, August 29, 2006 9:44 AM

Introduction

3

Feature highlights

This unit is compatible with the cordless camera and USB adaptor for Skype. By purchasing

and registering the optional cordless camera and/or USB adaptor (page 4), the following

features become available to you.

Camera monitoring using the handset (KX-TGA914FX Cordless

camera required)

L You can monitor the room where the cordless camera is located when:

– you access the cordless camera using the handset

– the cordless camera pages the handset when it detects sound

– the cordless camera user pages the handset using the call button

Free internet calls using Skype (KX-TGA915EX USB adaptor required)

L You can make free calls over the Internet to anyone in the world who has Skype.

L Skype software is free and works with most computers.

L Skype software is easy to download and use.

TG9120FX(e).book Page 3 Tuesday, August 29, 2006 9:44 AM

Introduction

4

Expanding your phone system

You can expand your phone system by registering the optional devices to a single base unit.

L A maximum of 6 total units (optional and included) can be registered to a single base unit.

*1 By registering the USB adaptor KX-TGA915EX to your base unit and installing Skype

software to your computer, you can make calls with your handset over the Internet via the

computer.

Optional devices

Additional Digital

Cordless Handset

KX-TGA910FX

max. 5

Cordless Camera

KX-TGA914FX

(For camera

monitoring)

max. 5

USB Adaptor

KX-TGA915EX

(For calls over the

Internet)

*1

max. 1

TG9120FX(e).book Page 4 Tuesday, August 29, 2006 9:44 AM

Table of Contents

5

Preparation

Accessory information . . . . . . . . . . . . . . . 6

Important information . . . . . . . . . . . . . . . . 7

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connections . . . . . . . . . . . . . . . . . . . . . . 12

Battery installation/replacement. . . . . . . 12

Battery charge . . . . . . . . . . . . . . . . . . . . 13

Screen saver mode . . . . . . . . . . . . . . . . 13

Turning the power on/off . . . . . . . . . . . . 14

Symbols used in these operating

instructions. . . . . . . . . . . . . . . . . . . . . . . 14

Region settings . . . . . . . . . . . . . . . . . . . 14

Display language . . . . . . . . . . . . . . . . . . 14

Dialling mode (tone/pulse) . . . . . . . . . . . 14

Date and time . . . . . . . . . . . . . . . . . . . . 15

C Making/Answering Calls

Making calls . . . . . . . . . . . . . . . . . . . . . . 16

Answering calls . . . . . . . . . . . . . . . . . . . 18

k Phonebooks

Handset phonebook. . . . . . . . . . . . . . . . 19

Shared phonebook . . . . . . . . . . . . . . . . 23

m Handset Settings

Handset settings . . . . . . . . . . . . . . . . . . 25

Time settings . . . . . . . . . . . . . . . . . . . . . 27

Ringer setup . . . . . . . . . . . . . . . . . . . . . 27

Display setup . . . . . . . . . . . . . . . . . . . . . 30

Baby monitor (additional handset

required) . . . . . . . . . . . . . . . . . . . . . . . . 30

Other options . . . . . . . . . . . . . . . . . . . . . 31

L Base Unit Settings

Base unit settings . . . . . . . . . . . . . . . . . 33

Ringer setup . . . . . . . . . . . . . . . . . . . . . 34

Call options . . . . . . . . . . . . . . . . . . . . . . 34

Other options . . . . . . . . . . . . . . . . . . . . . 35

j Caller ID Service

Using Caller ID service . . . . . . . . . . . . . 36

Caller list . . . . . . . . . . . . . . . . . . . . . . . . 37

Voice mail service . . . . . . . . . . . . . . . . . 38

X SMS (Short Message

Service)

Using SMS (Short Message Service) . . 39

Turning SMS on/off . . . . . . . . . . . . . . . . 39

Storing SMS message centre

numbers. . . . . . . . . . . . . . . . . . . . . . . . . 39

Sending a message. . . . . . . . . . . . . . . . 39

Receiving a message . . . . . . . . . . . . . . 40

SMS settings . . . . . . . . . . . . . . . . . . . . . 41

I Answering System

Features

Answering system . . . . . . . . . . . . . . . . . 43

Turning the answering system on/off. . . 43

Greeting message . . . . . . . . . . . . . . . . . 43

Listening to messages. . . . . . . . . . . . . . 44

Direct command operation using the

handset . . . . . . . . . . . . . . . . . . . . . . . . . 45

Remote operation . . . . . . . . . . . . . . . . . 45

Answering system settings . . . . . . . . . . 47

Multi-unit Operation

Operating additional units . . . . . . . . . . . 48

Registering a handset to a base unit . . . 48

Intercom between handsets . . . . . . . . . 50

Transferring calls between handsets,

conference calls. . . . . . . . . . . . . . . . . . . 50

Copying phonebook entries. . . . . . . . . . 51

Useful Information

Using the belt clip . . . . . . . . . . . . . . . . . 52

Character entry . . . . . . . . . . . . . . . . . . . 53

Error messages . . . . . . . . . . . . . . . . . . . 56

Troubleshooting. . . . . . . . . . . . . . . . . . . 57

Specifications. . . . . . . . . . . . . . . . . . . . . 62

Index

Index . . . . . . . . . . . . . . . . . . . . . . . . . . 63

TG9120FX(e).book Page 5 Tuesday, August 29, 2006 9:44 AM

Preparation

6

Accessory information

Included accessories

*1 The handset cover comes attached to the handset.

Additional/replacement accessories

Please contact your nearest Panasonic dealer for sales information.

Note:

L You can expand your phone system by registering optional Panasonic devices (page 4).

L When replacing the batteries, use only 2 rechargeable AAA (R03) size nickel metal hydride

(Ni-MH) batteries. We recommend using Panasonic rechargeable batteries (Model No.

P03P).

L We cannot be responsible for any damage to the unit or degradation of performance which

may occur from using non-Panasonic rechargeable batteries.

No. Accessory items Quantity

1 AC adaptor for base unit (Part No. PQLV207CE) 1

2 Telephone line cord 1

3 Rechargeable batteries AAA (R03) size

(Part No. HHR-4EPT)

2

4 Handset cover

*1

1

5 Belt clip 1

6 Audio cable 1

123456

No. Model No. Description

1 KX-TCA717EX Wall-Mounting Adaptor

2 KX-TCA94EX Headset

3 KX-A272 DECT repeater

12

TG9120FX(e).book Page 6 Tuesday, August 29, 2006 9:44 AM

Preparation

7

Important information

General

L Use only the AC adaptor included with this

product, noted on page 6.

L Do not connect the AC adaptor to any AC

outlet other than a standard 220–240 V

AC outlet.

L This product is unable to make calls when:

– the portable handset battery(ies) need

recharging or have failed.

– there is a power failure.

– the key lock feature is turned on.

L Do not open the base unit, charger, or

handset other than to replace the

battery(ies).

L This product should not be used near

emergency/intensive care medical

equipment and should not be used by

people with pacemakers.

L Care should be taken that objects do not

fall onto, and liquids are not spilled into,

the unit. Do not subject this product to

excessive smoke, dust, mechanical

vibration or shock.

Environment

L Do not use this product near water.

L This product should be kept away from

heat sources such as radiators, cookers,

etc. It should also not be placed in rooms

where the temperature is less than 5 °C or

greater than 40 °C.

L The AC adaptor is used as the main

disconnect device. Ensure that the AC

outlet is installed near the product and is

easily accessible.

Warning:

L To prevent the risk of electrical shock, do

not expose this product to rain or any

other type of moisture.

L Unplug this product from power outlets if it

emits smoke, an abnormal smell, or

makes unusual noise. These conditions

can cause fire or electric shock. Confirm

that smoke has stopped emitting and

contact an authorised service centre.

Battery caution

L We recommend using the battery(ies)

noted on page 6. Use only rechargeable

battery(ies).

L Do not mix old and new batteries.

L Do not dispose of the battery(ies) in a fire,

as they may explode. Check with local

waste management codes for special

disposal instructions.

L Do not open or mutilate the battery(ies).

Released electrolyte from the battery(ies)

is corrosive and may cause burns or injury

to the eyes or skin. The electrolyte may be

toxic if swallowed.

L Exercise care when handling the

battery(ies). Do not allow conductive

materials such as rings, bracelets or keys

to touch the battery(ies), otherwise a short

circuit may cause the battery(ies) and/or

the conductive material to overheat and

cause burns.

L Charge the battery(ies) in accordance

with the information provided in these

operating instructions.

L Only use the included base unit (or

charger) to charge the battery(ies). Do not

tamper with the base unit (or charger).

Failure to follow these instructions may

cause the battery(ies) to swell or explode.

TG9120FX(e).book Page 7 Tuesday, August 29, 2006 9:44 AM

Preparation

8

Information on Disposal for

Users of Waste Electrical &

Electronic Equipment (private

households)

This symbol on the products and/or

accompanying documents means that used

electrical and electronic products should not

be mixed with general household waste. For

proper treatment, recovery and recycling,

please take these products to designated

collection points, where they will be

accepted on a free of charge basis.

Alternatively, in some countries you may be

able to return your products to your local

retailer upon the purchase of an equivalent

new product.

Disposing of this product correctly will help

to save valuable resources and prevent any

potential negative effects on human health

and the environment which could otherwise

arise from inappropriate waste handling.

Please contact your local authority for

further details of your nearest designated

collection point.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact your

dealer or supplier for further information.

Information on Disposal in other

Countries outside the European Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please

contact your local authorities or dealer and

ask for the correct method of disposal.

Controls

Handset

A Speaker

B Charge contact

C Display

D Soft keys

E Headset jack/Audio jack

F {C} (Talk)

G Joystick

H {s} (Speakerphone)

I Dial keypad

J {R} (Recall)

K Charge indicator/Ringer indicator/

Message indicator

L Receiver

M {ih} (Off/Power)

N {C/T} (Clear/Mute)

O {INT} (Intercom)

P Microphone

A

B

C

F

G

H

I

D

E

M

N

O

P

L

K

J

TG9120FX(e).book Page 8 Tuesday, August 29, 2006 9:44 AM

Preparation

9

Using the joystick

The handset joystick can be used to

navigate through menus and to select items

shown on the display, by pushing it up,

down, left, or right.

It can also be used to select the centre soft

key icon, by pressing down on the centre of

the joystick.

Base unit

A Charge contact

B Speaker

C {x} (Page)

D {4} (Erase)

E {■} (Stop)

F {s} (Answer on)/Answer on indicator

G {6} (Play)/Message indicator

H Navigator key ({^}/{V}/{8}/{7})

Displays

Display icons

A

B

C

DE

F

G

H

Display

icon

Meaning

w Within range of a base unit

L When flashing: Handset is

searching for base unit.

(out of range of base unit,

handset is not registered

to base unit, no power on

base unit)

x Handset is accessing base

unit. (intercom, paging,

changing base unit settings,

etc.)

k Handset is on an outside

call.

y Missed call

*1

(page 36)

u Answering system is on

(page 43) and/or new

messages have been

recorded. (page 43)

n Answering system is full.

d Answering system answers

calls with a greeting

message and caller

messages are not recorded.

(page 47)

% An audible call

announcement has been

recorded for this entry.

(page 23)

@ Battery strength

e Alarm is on. (page 27)

d Voice enhancer is set to high

or low tone. (page 17)

x Call privacy mode is on.

(page 17)

T Mute is on. (page 17)

TG9120FX(e).book Page 9 Tuesday, August 29, 2006 9:44 AM

Preparation

10

Cordless camera KX-TGA914FX users

only

USB adaptor KX-TGA915EX users only

Menu icons

When in standby mode, pressing down on

the centre of the joystick reveals the

handset’s main menu. From here you can

access various features and settings.

Soft keys

The handset features two soft keys and a

joystick. By pressing a soft key, or by

pressing the centre of the joystick, you can

select the feature or operation indicated by

the soft key icon shown directly above it.

~ Ringer volume is off.

(page 27)

f Night mode is on. (page 29)

h New SMS message

received

*2

(page 40)

j Displayed when writing an

SMS message.

*2

(page 39)

m SMS memory is full.

*2

z New voice mail message

received

*3

(page 38)

Line or answering system is

being used by another

handset or the base unit.

*1 Caller ID subscribers only

*2 SMS users only

*3 Voice mail users only

Display

icon

Meaning

8 Handset is connected to the

cordless camera.

L When flashing: Cordless

camera is paging the

handset because it

detected sound or its call

button was pressed.

Display

icon

Meaning

D Handset is in IP phone

mode.

L When flashing: An internet

call is being received.

9 Missed internet call

Display

icon

Meaning

Menu icon Menu/feature

Caller List

SMS (Short Message

Service)

Answer System

Display Setup

*1

Handset Setup

Base Unit Setup

*1 3 (“Ph.Book Setup”) is displayed

instead of M (“Display Setup”) for

USB adaptor KX-TGA915EX users.

Ph.Book Setup

TG9120FX(e).book Page 10 Tuesday, August 29, 2006 9:44 AM

Preparation

11

Soft key icons

Cordless camera KX-TGA914FX users

only

USB adaptor KX-TGA915EX users only

Soft

key

icon

Action

U Returns to the previous

screen.

P Allows you to make an

intercom calls.

K

J

Displays the menu.

M

L

Accepts the current selection.

j Displays a previously dialled

phone number.

n Opens the handset

phonebook.

T Opens the shared

phonebook.

k Displays the phonebook

search menu.

I Turns the key lock feature off.

(page 17)

s Switches between AM, PM,

and 24-hour time entry.

X Displayed when LetterWise

®

character entry is selected.

Y Displayed when alphabet

character entry is selected.

Z Displayed when numeric

character entry is selected.

o Displayed when Greek

character entry is selected.

q Displayed when extended 1

character entry is selected.

r Displayed when extended 2

character entry is selected.

p Displayed when Cyrillic

character entry is selected.

e Turns the answering system

on/off.

Q Starts recording. (page 28)

O

N

Stops recording or playback.

l Inserts a dialling pause.

(page 17)

W Erases the selected item.

b Displays the picture list.

V Displays the selected

phonebook entry.

c Displays the picture.

d Goes to the next screen.

w Establishes a conference call.

g

f

Saves the handset

phonebook entry or the

recorded melody data.

t Selects the highlighted item.

a Inserts a character.

Soft

key

icon

Action

B Adjusts the display

brightness.

A Switches between Zoom In

and Normal mode.

v Selects the audio detection

sensitivity.

Soft

key

icon

Action

D Allows you to make an

internet call.

G Switches to Outgoing call

history for internet calls.

F Switches to Incoming call

history for internet calls.

Soft

key

icon

Action

TG9120FX(e).book Page 11 Tuesday, August 29, 2006 9:44 AM

Preparation

12

Connections

When connecting the AC adaptor to the

base unit, a short beep will be heard. If it is

not heard, check the connections.

Note:

L Never install telephone wiring during a

lightning storm.

L The AC adaptor must remain connected

at all times. (It is normal for the adaptor to

feel warm during use.)

L The AC adaptor should be connected to a

vertically oriented or floor-mounted AC

outlet. Do not connect the AC adaptor to a

ceiling-mounted AC outlet, as the weight

of the adaptor may cause it to become

disconnected.

Location

L For maximum distance and noise-free

operation, place your base unit:

– away from electrical appliances such as

TVs, radios, personal computers or

other phones.

– in a convenient, high and central

location.

Battery

installation/replacement

Important:

L Use only the included rechargeable

batteries noted on page 6, 7.

L When replacing batteries, we recommend

using the Panasonic rechargeable

batteries noted on page 6, 7.

L Wipe the battery ends (S, T) with a dry

cloth.

L When installing the batteries, avoid

touching the battery ends (S, T) or the

unit contacts.

1 Press the notch on the handset cover

firmly and slide it in the direction of the

arrow.

L When replacing batteries, remove the

old batteries positive (S) end first.

2 Insert the batteries negative (T) end

first. Close the handset cover.

u Switches to Voicemail history

for internet calls.

E Rejects the 2nd call.

H Places the internet call on

hold.

Soft

key

icon

Action

(220–240 V, 50 Hz)

To telephone network

Hook

Use only the included AC adaptor

and telephone line cord.

TG9120FX(e).book Page 12 Tuesday, August 29, 2006 9:44 AM

Preparation

13

Battery charge

Place the handset on the base unit for

about 7 hours before initial use.

When charging, “Charging” will be

displayed.

When the batteries are fully charged,

“Charge Completed” will be displayed.

L While charging, the charge indicator on

the handset lights in amber. When the

batteries are fully charged, the charge

indicator lights in green.

Note:

L It is normal for the handset to feel warm

during charging.

L If you want to use the unit immediately,

charge the batteries for at least 15

minutes.

L Clean the charge contacts of the handset

and base unit with a soft, dry cloth once a

month, otherwise the batteries may not

charge properly. Clean more often if the

unit is exposed to grease, dust, or high

humidity.

Battery strength

Panasonic Ni-MH battery performance

(included batteries)

Note:

L It is normal for batteries not to reach full

capacity at the initial charge. Maximum

battery performance is reached after a few

complete cycles of charge/discharge

(use).

L Actual battery performance depends on a

combination of how often the handset is in

use and how often it is not in use

(standby).

L Battery operating time may be shortened

over time depending on usage conditions

and ambient temperature.

L Even after the handset is fully charged,

the handset can be left on the base unit

without any ill effect on the batteries.

L The battery strength may not be displayed

correctly after you replace the batteries. In

this case, place the handset on the base

unit and charge for at least 7 hours.

Screen saver mode

The backlight will turn off completely

after 1 minute of inactivity if the handset is

not on the base unit.

To use the handset when it is in screen

saver mode, first press {ih} to turn the

display on again.

Battery icon Battery strength

@ High

? Medium

/ Low

When flashing: Needs

to be charged.

Charge

contact

Operation Operating time

In continuous use 15 hours max.

In continuous

standby mode

240 hours max.

TG9120FX(e).book Page 13 Tuesday, August 29, 2006 9:44 AM

Preparation

14

Turning the power on/off

Power on

Press {ih} until a short beep sounds.

Power off

Press {ih} for about 2 seconds.

Symbols used in these

operating instructions

Region settings

You can set the unit to use settings that

match your country (page 35). The display

language and other settings will change

accordingly.

Note:

L The display language only changes (to the

selected country’s default setting) for the

handset used to select the region setting.

You must change the display language for

all other handsets separately.

Display language

17 display languages are available.

1 {ih} i J (centre of joystick)

2 Select m by pushing the joystick in any

direction. i L (centre of joystick)

3 Push the joystick up or down to select

“Display Setup”. i L

4 Push the joystick up or down to select

“Select Language”. i L

5 Push the joystick up or down to select

the desired language. i L i

{ih}

Note:

L If you select a language you cannot read,

press {ih}, press J, select m, press

L, push the joystick down 2 times,

press L, push the joystick down 2

times, press L, select the desired

language, then press L. Press {ih}.

Symbol Meaning

J Press J (centre of joystick).

i Proceed to the next operation.

L Press L (centre of joystick).

j

X

I

M

3

m

L

Select the mentioned handset

menu icon (page 10).

Example: m (handset setup

menu icon)

Select m by pushing the

joystick in any direction.

“ ” Select the words in quotations

shown on the display (e.g.,

“Time Settings”) by

pushing the joystick up or

down.

You can select

“Deutsch

Deutsch

”,

,

“English

English

”,

,

“Türk

rk

çe”,

,

“Magyar

Magyar

”,

,

“Polski

Polski

”,

“slovensky

slovensky

”, “ČeŠtina

tina

”,

,

“Hrvatski

Hrvatski

”,

,

“Slovenscina

Slovenscina

”,

,

“Eesti

Eesti

”,

“LIETUVI

LIETUVI

ŠKAI

KAI

”,

,

“Latvie

Latvie

Šu”,

,

“Rom

Rom

ânã”,

,

“БЪЛГАРСКИ

БЪЛГАРСКИ

”,

,

“Srpski

Srpski

”,

“МАКЕДОНСКИ

МАКЕДОНСКИ

”, or

, or

“Shqiptar

Shqiptar

”.

TG9120FX(e).book Page 14 Tuesday, August 29, 2006 9:44 AM

Preparation

15

Dialling mode (tone/pulse)

Change the dialling mode depending on

your telephone line service.

“Tone”: Select when you have a touch tone

service.

“Pulse”: Select when you have rotary or

pulse service.

1 J (centre of joystick)

2 Select L by pushing the joystick in any

direction. i L (centre of joystick)

3 Push the joystick up or down to select

“Call Options”. i L

4 Push the joystick up or down to select

“Dial Mode”. i L

5 Push the joystick up or down to select

the desired setting. i L i {ih}

Date and time

1 J (centre of joystick)

2 Select m by pushing the joystick in any

direction. i L (centre of joystick)

3 Push the joystick up or down to select

“Time Settings”. i L

4 Push the joystick up or down to select

“Set Date & Time”. i L

5 Enter the current day, month, and year.

Example: 17 May, 2006

{1}{7} {0}{5} {0}{6}

6 Enter the current hour and minute.

Example: 3:30 PM

{0}{3} {3}{0} i Press s until

“03:30 PM” is displayed.

7 L i {ih}

Note:

L To correct a digit, use the joystick to move

the cursor to the digit, then make the

correction.

L The date and time may be incorrect after a

power failure. In this case, set the date

and time again.

Time adjustment (Caller ID

subscribers only)

This feature allows the unit to automatically

adjust the date and time each time caller

information is received. To use this feature,

your caller ID service must provide caller

information, including date and time, in FSK

protocol. Consult your service provider/

telephone company for details.

To turn this feature on, select “Caller

ID[Auto]”. To turn this feature off, select

“Manual”.

1 J (centre of joystick) i m i L

2 “Time Settings” i L

3 “Time Adjustment” i L

4 “Caller ID[Auto]” or “Manual” i

L i {ih}

Important:

L To use this feature, set the date and time

first (page 15).

TG9120FX(e).book Page 15 Tuesday, August 29, 2006 9:44 AM

C

Making/Answering Calls

16

Making calls

1 Lift the handset and dial the phone

number.

L To correct a digit, press {C/T}, then

enter the correct number.

2 {C}

3 When finished talking, press {ih} or

place the handset on the base unit.

Speakerphone

1 During a conversation, press {s} to turn

on the speakerphone.

L Speak alternately with the caller.

2 When finished talking, press {ih}.

Note:

L For best performance, use the

speakerphone in a quiet environment.

L To switch back to the receiver, press

{C}.

To adjust the receiver or speaker volume

Push the joystick up or down while on a call.

Redial feature

Previously dialled phone numbers (each 48

digits max.) can be redialled.

To make a call using the redial list

The last 10 phone numbers dialled are

stored in the redial list.

1 j (right soft key)

2 Push the joystick up or down to select

the desired number.

3 {C} / {s}

L If {s} is pressed and the other party’s

line is engaged, the unit will

automatically redial up to 11 more

times. While the handset is waiting to

redial, the ringer indicator will flash. To

cancel, press {ih}.

To edit a number in the redial list before

calling it

1 j (right soft key)

2 Push the joystick up or down to select

the desired number. i J

3 “Edit and Call” i L

4 Use the joystick to move the cursor. i

Edit the number.

L Place the cursor on the number you

wish to erase, then press {C/T}.

L Place the cursor to the right of where

you want to insert a number, then

press the appropriate dial key.

5 {C} / {s} / L

To erase numbers in the redial list

1 j (right soft key)

2 Push the joystick up or down to select

the desired number. i J

3 “Erase” i L

L If you want to erase all numbers in the

list, select “Erase All”, then press

L.

4 “Yes” i L i {ih}

To store a number from the redial list into

the handset phonebook

1 j (right soft key)

2 Push the joystick up or down to select

the desired number. i J

3 “Add Phonebook” i L

4 “Name” i L

5 Enter a name (16 characters max.; page

53). i L

6 “<Save>” i L i {ih}

L You can also press g to save the

entry.

L To assign a category to the entry,

continue from step 7, “Adding entries

to the handset phonebook”, page 19.

TG9120FX(e).book Page 16 Tuesday, August 29, 2006 9:44 AM

C

Making/Answering Calls

17

Other features

Voice enhancer

You can change the tone quality of the

receiver while you are on a call.

1 Press J during a call.

2 “Voice Enhancer” i L

3 “High Tone” or “Low Tone” i L

L d is displayed.

Call share

A 2nd handset can join an existing outside

call.

To join the conversation, press {C} / {s}

when the other handset is on an outside call.

Call privacy

Call privacy allows you to prevent other

users from joining your conversations with

outside callers. To allow other users to join

your conversations, leave this feature off.

The default setting is “Off”.

1 Press J during an outside call.

2 “Privacy” i L

3 “On” or “Off” i L

L When this feature is turned on, x is

displayed.

Note:

L This feature will turn off after you hang up

the call.

Mute

While mute is turned on, you will be able to

hear the other party, but the other party will

not be able to hear you.

To mute your voice, press {C/T}.

L T is displayed.

L To return to the conversation, press

{C/T} again.

Key lock

The handset can be locked so that no calls

or settings can be made. Incoming calls can

be answered, but all other functions are

disabled while key lock is on.

To turn key lock on, press J (centre of

joystick) for about 2 seconds.

L I is displayed.

L To turn key lock off, press I (centre of

joystick) for about 2 seconds.

{R} button (to use the recall feature)

{R} is used to access optional telephone

services. Contact your service

provider/telephone company for details.

Note:

L If your unit is connected to a PBX (private

branch exchange), pressing {R} can allow

you to access certain features of your host

PBX such as transferring an extension

call. Consult your PBX dealer for details.

L You can change the recall time (page 34).

Pause button (for PBX/long distance

service users)

A pause is sometimes required when

making calls using a PBX or long distance

service.

Example: If you have to dial {0} before

dialling outside numbers manually, you will

probably need to pause after dialling {0}

until you hear a dial tone.

1 {0} i l

2 Dial the phone number. i {C} / {s}

Note:

L A 3 second pause is inserted each time

l is pressed. Press repeatedly to insert

longer pauses.

Temporary tone dialling (for rotary or

pulse service users)

You can temporarily switch the dialling mode

to tone when you need to access touch tone

services (e.g., telephone banking services).

1 Make a call.

TG9120FX(e).book Page 17 Tuesday, August 29, 2006 9:44 AM

C

Making/Answering Calls

18

2 Press {*} when prompted to enter your

code or PIN, then press the appropriate

dial keys.

Note:

L The dialling mode will return to pulse

when you hang up.

Answering calls

When a call is being received, the ringer

indicator on the handset flashes.

1 Lift the handset and press {C} or {s}

when the unit rings.

L You can also answer a call by pressing

any dial key from {0} to {9}, {*}, {#},

or {INT}. (Any key answer feature)

2 When finished talking, press {ih} or

place the handset on the base unit.

Auto talk feature

You can answer calls simply by lifting the

handset off the base unit. You do not need to

press {C}. To turn this feature on, see

page 31.

To adjust the ringer volume when

receiving a call

Push the joystick up or down.

Other features

Handset locator

Using this feature, you can locate the

handset if it has been misplaced.

1 Press {x} on the base unit.

2 To stop paging, press {x} on the base

unit or press {ih} on the handset.

TG9120FX(e).book Page 18 Tuesday, August 29, 2006 9:44 AM

k

Phonebooks

19

Handset phonebook

The handset phonebook allows you to make

calls without having to dial manually. You

can store up to 3 phone numbers for each

entry and assign each handset phonebook

entry to the desired category.

The total number of entries that can be

stored varies by the number of phone

numbers stored for each entry, as shown

below:

Adding entries to the handset

phonebook

1

n (left soft key) i J

(When USB adaptor is registered:

J (centre of joystick) i 3 i L

i J)

2 “New Entry” i L

3 “Name” i L

4 Enter the party’s name (16 characters

max.; page 53). i L

5 “Phone No. 1” i L

L You can store up to 3 phone numbers

for each entry.

6 Enter the party’s phone number (24

digits max.). i L

7 “Category 1” i L

8 Select the desired category. i L

9 “<Save>” i L i {ih}

Categories

Categories can help you find entries in the

handset phonebook quickly and easily.

When adding an entry to the handset

phonebook, you can assign it to the desired

category. You can change the names of

categories assigned for handset phonebook

entries (“Friends”, “Family”, etc.) and then

search for handset phonebook entries by

category. Additional category features are

available for Caller ID subscribers (page

36).

Changing category names

1 n (left soft key) i J

(When USB adaptor is registered:

J (centre of joystick) i 3 i L

i J)

2 “Category” i L

3 Select the desired category. i L

4 “Category Name” i L

5 Edit the name (10 characters max.;

page 53). i L i {ih}

Finding and calling a handset

phonebook entry

Handset phonebook entries can be

searched for alphabetically, by first

character, by category, or by scrolling

through all handset phonebook entries.

When you have found the desired entry,

press {C}.

L If more than 1 phone number is assigned

to the entry, press {C} / V. i Select

the desired phone number. i {C} /

{s}

1 name + 1 phone

number

200 entries

1 name + 2 phone

numbers

133 entries

1 name + 3 phone

numbers

100 entries

TG9120FX(e).book Page 19 Tuesday, August 29, 2006 9:44 AM

k

Phonebooks

20

Scrolling through all entries

1 n (left soft key)

(When USB adaptor is registered:

J (centre of joystick) i 3 i L)

2 Push the joystick up or down to display

the desired entry.

Searching alphabetically

This method is useful when you are

searching for an entry which starts with a

letter of the alphabet.

1 n (left soft key)

(When USB adaptor is registered:

J (centre of joystick) i 3 i L)

2 Press the dial key ({0} to {9}) which

corresponds to the letter you are

searching for (page 53).

L Press the same dial key repeatedly to

display the first entry corresponding to

each letter located on that dial key.

L If there is no entry corresponding to

the letter you selected, the next entry

will be displayed.

3 Push the joystick up or down to scroll

through the phonebook if necessary.

Searching by first character (index

search)

1 n (left soft key) i k

(When USB adaptor is registered:

J (centre of joystick) i 3 i L

i k)

2 “Index Search” i L

3 Press the right soft key repeatedly to

select the character entry mode that

contains the character you are

searching for.

4 Push the joystick in any direction to

select the desired character. i L

L If there is no entry corresponding to

the letter you selected, the next entry

will be displayed.

5 Push the joystick up or down to scroll

through the phonebook if necessary.

Note:

L In step 4, you can also press the dial key

({0}-{9}) that contains the character you

are searching for (page 53).

Searching by category

1 n (left soft key) i k

(When USB adaptor is registered:

J (centre of joystick) i 3 i L

i k)

2 “Category Search” i L

3 Select the category you want to search.

i L

L If you select “All”, the unit will end

the category search.

4 Push the joystick up or down to scroll

through the phonebook if necessary.

Viewing phonebook entry details

1

Find the desired entry (page 19). i

V

L The name and phone numbers

assigned to the entry are displayed.

2 Push the joystick right or left to view the

next or previous entry.

TG9120FX(e).book Page 20 Tuesday, August 29, 2006 9:44 AM

Stránka sa načítava ...

Panasonic KXTG9120FX Návod na používanie

Panasonic KXTG9120FX Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty