Avent SCD831/52 Používateľská príručka

Kategória
Detské telefóny
Typ
Používateľská príručka
SCD831
SCD833
SCD835
1
16
2
3
4
5
13
14
12
11
6
9 1087
17
18
22
20
19
21
23
25
24
15
English 4
Čeština 29
Eesti 54
Magyar 79
Қ
аза
қ
ша 105
Lietuviškai 131
Latviešu 157
Polski 183
Русский 210
Slovensky 238
Українська 265
4 English
Introduction
Congratulations on your purchase and welcome to Philips Avent! To fully
benet from the support that Philips Avent oers, register your product at
www.philips.com/welcome.
The Philips Avent video baby monitor provides you with round-the-clock
support and it allows you to see your baby day and night from anywhere
in the house. The latest digital technology guarantees clear sound and the
clearest image of your baby. This gives you an additional sense of security
without entering your baby’s room and disturbing its sleep.
General description
1 Parent unit
2 Display
3 ECO light
4 Battery status light
5 Link light
6 Speaker
7 Control button (menu navigation/volume/brightness)
8 Sensitivity button
9 Lullaby button
10 Talk-back button
11 Socket for small plug
12 Mode button
13 On/o button
14 Antenna
15 Belt clip
16 Baby unit
17 Camera
18 Lullaby on/o button
19 Microphone
20 On/o slide
21 Antenna
22 Speaker
23 Socket for small plug
24 Wall mounting holes
25 Adapter (2x)
5English
Important safety information
Read this important information carefully before you use the appliance and
save it for future reference.
IMPORTANT
This baby monitor is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not be used as such.
Never leave your baby alone in your home. Always make sure there is
someone present to look after the baby and take care of its needs.
Disclaimer
Please note that you use this baby monitor at your own risk. Koninklijke
Philips N.V. and its subsidiary companies are not responsible for the
operation of this baby monitor or your use of it and therefore do not accept
any liability in connection with your use of this baby monitor.
Danger
- Never immerse any part of the baby monitor in water or any other liquid.
Do not place the appliance where water or any other liquid can drip or
splash onto it. Never use the baby monitor in moist places or close to
water.
- Never put any object on top of the baby monitor and do not cover
it. Do not block any ventilation openings. Install according to the
manufacturer’s instructions.
Warning: Strangulation Hazard—Children have STRANGLED in
cords. Keep this cord out of the reach of children (more than 3 ft
(0.9 m) away). Do not remove this tag.
Warning
- Check if the voltage indicated on the adapter corresponds to the local
mains voltage before you connect the appliance.
- Do not modify or cut o any part of the adapter and its cord, as this
causes a hazardous situation.
- Only use the adapter supplied.
- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
- Protect the mains cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
appliance.
6 English
- Make sure that you place the baby monitor in such a way that its cord
does not obstruct a doorway or passage. If you place the baby monitor
on a table or low cabinet, do not let the mains cord hang over the edge
of the table or cabinet. Make sure the cord does not lie on the oor
where it presents a tripping hazard.
- Keep the packaging materials (plastic bags, cardboard buers, etc.) out of
the reach of children, as they are not a toy.
- To prevent electric shock, do not open the housing of the baby unit or
parent unit.
Battery safety instructions
- Only use this product for its intended purpose and follow the general and
battery safety instructions as described in this user manual. Any misuse
can cause electric shock, burns, re and other hazards or injuries.
- To charge the battery, only use the detachable supply unit* provided with
the product. Do not use an extension cord.
- Charge, use and store the product at a temperature between 0 °C and
40 °C.
- Always unplug the product when it is fully charged.
- Do not burn products and their batteries and do not expose them
to direct sunlight or to high temperatures (e.g. in hot cars or near hot
stoves). Batteries may explode if overheated.
- If the product becomes abnormally hot, gives o an abnormal smell,
changes color or if charging takes much longer than usual, stop using and
charging the product and contact your local Philips dealer.
- Do not place products and their batteries in microwave ovens or on
induction cookers.
- This product contains a rechargeable battery that is non-replaceable. Do
not open the product to replace the rechargeable battery.
- When you handle batteries, make sure that your hands, the product and
the batteries are dry.
- To prevent batteries from heating up or releasing toxic or hazardous
substances, do not modify, pierce or damage products and batteries and
do not disassemble, short-circuit, overcharge or reverse charge batteries.
- To avoid accidental short-circuiting of batteries after removal, do not let
battery terminals come into contact with metal object (e.g. coins, hairpins,
rings). Do not wrap batteries in aluminium foil. Tape battery terminals or
put batteries in a plastic bag before you discard them.
- If batteries are damaged or leaking, avoid contact with the skin or eye. If
this occurs, immediately rinse well with water and seek medical care.
Caution
- Use the appliance at a temperature between 0°C (32°F) and 40°C (104°F).
- Do not install the appliance near any heat sources such as radiators, heat
registers, stoves or other apparatus (including ampliers) that produce
heat.
- Make sure that your hands are dry when you handle adapters, plugs and
the mains cord.
- All required markings on the baby unit, parent unit and power adapter
are located on the bottom of the baby unit, parent unit and power
adapter.
7English
Declaration of conformity
Hereby, Philips Electronics Hong Kong Limited declares that this product is
in compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. A copy of the EC Declaration of Conformity (DoC) is
available online at www.philips.com/support.
Compliance with EMF
This product complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
Preparing for use
Baby unit
Put the power adapter in the baby unit and the adapter in the wall socket.
Parent unit
The parent unit runs on a built-in rechargeable Li-ion battery.
Follow the below steps to charge the parent unit:
1 Put the power adapter in the parent unit and put the adapter in the wall
socket.
- The battery status light turns orange to indicate that the appliance is
charging.
- When the battery is fully charged, the battery status indicator lights up
green continuously.
20°CEco
1
8 English
- When you charge the parent unit for 3 hours, it can be used cordlessly
for approx. 10 hours in ECO mode.
- If the parent unit is switched on during charging, charging takes
approximately twice as long.
- When the rechargeable battery of the parent unit is almost empty, the
battery status light turns red and the parent unit beeps.
- If the battery is completely empty and the parent unit it not connected
to the mains, the parent unit automatically switches o and loses
contact with the baby unit.
Note: The built in rechargeable battery cannot be removed from the
product.
Note: The battery gradually and very slowly discharges, even when the
parent unit is switched o.
Tip: To save battery, switch o the parent unit when you do not use it.
Note: We advise you to keep the parent unit connected to the mains
during the whole night. If the battery of the parent unit runs low during
the night, the parent unit beeps and this may wake you up.
Using the baby monitor
Linking parent unit and baby unit
1 Push the on/o slide on the baby unit upwards to the ON position.
2 When the baby unit is on, the power-on light on the baby unit lights up
green.
Note: The power-on light on the baby unit always lights up green, even
when there is no connection with the parent unit.
10 hrs=3 hrs
20°CEco
1
9English
3 Make sure that the parent unit and the baby unit are at least 2.5 meters/
8.2 feet away from each other to avoid acoustic feedback.
4 Press the on/o button on the parent unit for 1 second to switch on the
parent unit.
- The display goes on, the linking image appears on the display and the
link light lights up red. The parent unit starts to search for the baby
unit.
- When the parent unit and baby unit are linked, the link light lights up
green on the parent unit and one or more bars appear on the display.
Note: It takes less than 10 seconds to establish the link between the
parent unit and the baby unit.
When the baby unit is turned o, the parent unit will show the out of
range image. Make sure that the baby unit is switched on.
- If no connection has been established, the link light turns red, the
parent unit beeps three short beeps every 20 seconds and the out-of-
range image appears on the display.
>
2.5m/8.2ft
20°CEco
1
20°CEco
1
20°CEco
1
10 English
Positioning the baby monitor
Warning: The cord of the baby unit presents a potential
strangulation hazard. Make sure that the baby unit and its cord
are at least 1 meter / 3.5 feet away from your baby. Never place
the baby monitor inside the baby’s bed or playpen.
1 For optimal sound detection, make sure that the baby unit is no further
than 1.5 meter/ 5 feet away from the baby. Make sure that the baby unit
is at least 1 meter/ 3.5 feet away from the baby because of potential
strangulation hazard.
2 Place the parent unit within the operating range of the baby unit. Make
sure it is at least 2.5 meters / 8.2 feet away from the baby unit to avoid
acoustic feedback.
Note: If you use a cordless phone, wireless video, Wi-Fi network,
microwave oven or Bluetooth on 2.4 GHz and you experience
interference on either the parent unit or baby unit, move the parent unit
until there is no more interference.
3 There are two ways to position the baby unit
a Place the baby unit on a stable, level and horizontal surface.
b Mount the baby unit to the wall with screws.
Tip: The wall mount template (see 'Wall mount') to mount the baby unit
to the wall can be found at the end of this user manual.
Tip: Use the provided template to mark the exact location of the screw
holes on the wall.
Tip: Position the baby unit at a higher level to get a good overview of the
baby’s bed or playpen.
>1-1.5m/3.5-5f
t
>
2.5m/8.2ft
11English
4 Adjust the baby unit in a way that ensures the best visibility of your baby.
The baby unit can be rotated to position it in the desired way.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass (without metal,
wires or lead)
< 30 cm (12 in) 0-10 %
Brick, plywood < 30 cm (12 in) 5-35 %
Reinforced concrete < 30 cm (12 in) 30-100 %
Metal grilles or bars < 1 cm (0.4 in) 90-100 %
Metal or aluminium sheets < 1 cm (0.4 in) 100 %
Operating range
The operating range is up to 50 meters / 165 feet indoors and
300 meters / 985 feet outdoors. The operating range of the baby monitor
varies depending on the surroundings and factors that cause interference.
Wet and moist materials cause so much interference that the range loss is
up to 100 %.
Features and settings
Volume
You can adjust the speaker volume of the parent unit to the level you prefer.
1 Press the top or bottom part of the control button to adjust the volume.
<300m/985ft
<50m/165ft
12 English
Tip: Make sure that the volume is adapted to the current conditions.
Under noisy conditions, the vibration alert can be turned on as well.
The volume bar appears on the display to show the selected volume.
Note: If the volume is set to a high level, the parent unit consumes more
power.
Note: When the volume bar is at its minimum, the volume is muted. The
parent unit shows a mute icon in the status bar and you will only receive
alerts and video from the parent unit.
Brightness
You can adjust the display brightness of the parent unit to the level you
prefer.
1 Press the left or right part of the control button to adjust the brightness
of the display of the parent unit.
The brightness bar appears on the display to show the selected display
brightness.
Note: If the brightness is set to a high level, the parent unit consumes
more power.
Modes
This baby monitor has four dierent modes that allows you to choose how
you want to look after your baby: VIDEO, AUDIO, VOX and ECO.
With the baby monitor on, you can switch between these 4 dierent modes
by pressing the mode button on the side of the parent unit.
The display shows the selected mode. The selected mode is also indicated
in the status bar. When turning on the device, the mode that was last used
will be active.
20°C
1
20°C
1
13English
VIDEO mode
Press the mode button on the side of the parent unit to select the VIDEO
mode.
When the VIDEO mode is activated, the screen is always on, so you can see
your baby. All sounds are directly transmitted to the parent unit.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
AUDIO mode
1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.
When the AUDIO mode is activated, the display of the parent unit
switches o. After 3 seconds the display will completely turn o and the
status bar will disappear.
Note: The status bar is not visible when the display is o.
VIDEO
VIDEO
20°C
1
VIDEO
20°C
1
VIDEO
AUDIO
AUDIO
20°C
1
AUDIO
14 English
Note: The link light shows that the parent unit is still on and connected to
the baby unit.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
All sounds are constantly transmitted to the parent unit. If your baby
cries, the display of the parent unit is still o, but the sounds detected by
the baby unit are transmitted to the parent unit.
VOX mode
1 Press the mode button on the side of the parent unit to switch to VOX
mode.
Note: When the display is on, the selected mode is shown in the status
bar. The status bar is not visible when the display is o.
When the VOX mode is activated, the display and sound of the parent
unit switch o, if there is no sound detected for 20 seconds.
When sound is picked up by the baby unit, the display and sound of the
parent unit switch on immediately. The sounds are transmitted to the
parent unit.
Note: The minimum sound level to activate sound and display is dened
by the sensitivity setting.
ECO mode
1 Press the mode button on the side of the parent unit to switch to ECO
mode.
Note: When the display is on, the selected mode will be visible in the
status bar. The status bar is not visible when the display is o.
20°C
1
AUDIO
VOX
VOX
20°C
1
AUDIO
20°C
1
VOX
ECO
ECO
15English
When the ECO mode is activated the display and sound of the parent
unit switch o when no sound is detected for 20 seconds. The ECO light
lights up green to indicate that the ECO mode is activated. During ECO
mode the display and sound transmissions are turned o.
When sound is picked up by the baby unit, the display and sound of the
parent unit switch on immediately. The sounds are transmitted to the
parent unit.
Note: The minimum sound level to activate sound and display is dened
by the sensitivity setting.
Lullabies
You can activate the lullaby feature either from the parent unit or from the
baby unit.
To activate the lullaby feature from the parent unit, follow the instructions
below:
Lullaby selection
1 Press the lullaby button on the parent unit to open the menu for lullabies.
Note: Pressing the lullaby button while the lullaby menu is already open,
will close the menu.
2 Press the right part of the control button to enter the list of lullabies.
20°C
1
ECO
ECO
20°C
1
ECO
16 English
3 Press the top or bottom part of the control button to scroll through the
list of lullabies.
4 Press the right part of the control button to play a specic lullaby.
If you want to pause the lullaby, press the right side of the control button
again.
5 The status bar of the parent unit shows the number of lullabies that are
being played and repeated.
The lullaby starts to play on the baby unit and it is repeated continuously
for approximately 15 minutes.
Tip: To repeat all songs that are available, select the last option in the list.
6 To select another lullaby, scroll up or down with the control button
to select another song from the list. Press the right part of the control
button to start the selected song.
7 To stop the lullaby, press the lullaby button on the parent unit and pause
the song that is currently playing by pressing the right part of the control
button one more time.
Lullaby volume
1 Press the lullaby button and then press the bottom of the control button
to select the volume options of the lullaby menu. Press the right part of
the control button to access the lullaby volume levels.
Lullaby Songs
1 Rock-a-Bye Baby
2 Twinkle, Twinkle
3 Hush, Little Baby
4 Brahm’s Lullaby
5 Golden Slumbers
Lullaby Songs
1 Rock-a-Bye Baby
2 Twinkle, Twinkle
3 Hush, Little Baby
4 Brahm’s Lullaby
5 Golden Slumbers
15 min
Lullaby Songs
1 Rock-a-Bye Baby
2 Twinkle, Twinkle
3 Hush, Little Baby
4 Brahm’s Lullaby
5 Golden Slumbers
20°C
1
Lullaby Volume
VIDEO
17English
2 Press the top or bottom part of the control button to adjust the volume.
To activate the lullaby feature from the baby unit, press the lullaby on/o
button on the baby unit.
The latest lullaby selected on the parent unit starts to play on the baby
unit and is repeated continuously for approximately 15 minutes.
To stop the lullaby on the baby unit, press the lullaby on/o button on
the baby unit.
Talk-back
You can use the talk-back button on the parent unit to talk to your baby.
1 Press and hold the talk-back button on the parent unit.
2 Talk clearly into the microphone at the front of the parent unit from a
distance between 15-30cm /0.5-1ft.
As long as the talk-back button is pressed, there is an open sound
connection to the baby unit. The display of the parent unit shows the
talk-back icon, indicating the active connection.
3 Release the talk-back button when you have nished talking.
Note: As long as the talk-back button is pressed, the parent unit cannot
process sounds coming from the baby unit.
20°C
1
Lullaby Volume
VIDEO
15 min
18 English
Sensitivity
The sensitivity level of the baby unit denes what you hear through the
parent unit. When the level is set high, you will hear many sounds, including
soft background sounds. When the sensitivity level is set low, you will hear
only the louder sounds.
1 Press the sensitivity button to access the sensitivity levels.
Note: When pressing the sensitivity button again, you will leave the menu.
2 Press the top or bottom part of the control button to select the desired
sensitivity level.
If your baby only makes soft sounds, the sensitivity of the baby unit
needs to be set to a high sensitivity level on the parent unit.
The louder your baby sounds, the lower the sensitivity can be set on the
parent unit.
Note: In AUDIO and VIDEO mode, you will have continuous sound when
the sensitivity level is on 'very high'. Otherwise, low sounds will be muted.
Tip: The sensitivity level can be adjusted so you will always hear your
baby without the disruption of other sounds. When there is a lot of
background noise, turn the sensitivity lower so you will not hear these
sounds through the parent unit.
20°C
1
20°C
1
20°C
1
19English
Belt clip
You can take the parent unit with you inside and outside the house by
attaching the parent unit to your belt or waistband with the belt clip. This
allows you to monitor your baby while you are moving around.
Note: The display is now turned upside down, which allows you to see
your baby on the screen by simply lifting up the parent unit.
Cleaning and maintenance
Warning: Do not immerse the parent unit, baby unit and power
adapters in water and do not clean them under the tap.
Warning: Do not use cleaning sprays or liquid cleaners.
1 Switch o the baby unit, remove the power adapter from the baby unit
and remove the power adapter from the wall socket.
2 Clean the baby unit with a dry cloth.
Note: Fingerprints or dirt on the lens of the baby unit may aect the
camera’s performance. Avoid touching the lens with your ngers.
20 English
3 Switch o the parent unit, remove the power adapter from the parent
unit and remove the power adapter from the wall socket.
4 Clean the parent unit with a dry cloth.
5 Clean the adapters with a dry cloth.
Storage
When you are not going to use the baby monitor for a long time, store the
parent unit, the baby unit and the adapters in a cool and dry place.
Ordering accessories
To buy accessories or spare parts, visit www.philips.com/parts-and-
accessories or go to your Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the international warranty leaet
for contact details).
1 / 1

Avent SCD831/52 Používateľská príručka

Kategória
Detské telefóny
Typ
Používateľská príručka