Auriol Z32171D Operation and Safety Notes

IAN 60107

RADIO-CONTROLLED WEATHER STATION

RADIO-CONTROLLED

WEATHER STATION

Operation and Safety Notes

ST A CJA METEO

STEROW ANA RADIOWO

Wskazówki dotyczące obsługi i bezpieczeństwa

BEZDRÁTOV Á

METEOROLOGICKÁ STANICE

Pokyny pro obsluhu a bezpečnostní pokyny

METEOSTANICA

Pokyny pre obsluhu a bezpečnostné pokyny

RADIJSKO VODENA

VREMENSKA POSTAJA

Navodila za upravljanje in varnostna opozorila

RÁDIÓVEZÉRELT

IDŐJÁRÁSÁLLOMÁS

Kezelési és biztonsági utalások

GB Operation and Safety Notes Page 8

PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 30

HU Kezelési és biztonsági utalások Oldal 54

SI Navodila za upravljanje in varnostna opozorila Stran 77

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 101

SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 123

3

A

1 2

13 14 15 16

6

5

17 18 19 20

3 4

Z32171A,

Z32171B

Z32171C,

Z32171D

1 32

13

17 18 19

20

6

5

14 15 16

4

11

B

25 109

11

8

5

C

Z32171A,

Z32171B

Z32171C,

Z32171D

22

21

23

24

21

22

23

24

6

7

D

7

9

12

Z32171A,

Z32171B

Z32171C,

Z32171D

26

27

28

26

27

28

5

9

5

12

7

E

2

Z32171A,

Z32171B

Z32171C,

Z32171D

2

8 GB

Intended use .............................................................................................Page 9

Parts description .....................................................................................Page 9

Technical Data .......................................................................................... Page 10

Scope of delivery....................................................................................Page 10

General safety instructions ................................................................Page 11

Battery safety information ................................................................. Page 12

Start-up

Setting up the devices ..............................................................................Page 13

Starting the outdoor sensor / changing batteries ....................................Page 14

Starting the base station / changing batteries ........................................Page 14

The DCF signal (time transmitter) ............................................................. Page 15

Information in base mode

The clock field ...........................................................................................Page 16

The barometric pressure field...................................................................Page 17

The indoor temperature field....................................................................Page 18

The outdoor temperature field .................................................................Page 20

Settings

Basic settings ............................................................................................. Page 21

Temperature alarm ...................................................................................Page 23

Activating the temperature alarm ............................................................Page 24

Alarm .........................................................................................................Page 24

Accessing stored data ..............................................................................Page 26

Manually activating signal reception

Activating DCF signal reception ..............................................................Page 26

Activating reception from the outdoor sensor ......................................... Page 26

Background lighting .................................................................................Page 27

Troubleshooting ......................................................................................Page 27

Cleaning and Care..................................................................................Page 28

Disposal ......................................................................................................Page 28

Declaration of Conformity ..................................................................Page 28

Warranty ...................................................................................................Page 29

9 GB

Radio-controlled weather station

Intended use

This radio-controlled weather station displays the indoor and outdoor

temperature, indoor and outdoor humidity, and barometric pressure. It

features a radio-controlled clock and several alarm functions. The proba-

ble weather trend is calculated based on data collected. The product is

not intended for commercial use.

Parts description

Base station

1

Display

2

SNOOZE- / LIGHT ﬁeld

3

Keypad

4

Base station eyebolt

5

Battery compartment cover

6

Stand

7

Battery compartment

Outdoor sensor

8

Signal LED

9

Battery compartment cover

10

Outdoor sensor eyebolt

11

Outdoor sensor stand

12

Outdoor sensor battery

compartment

Keypad

13

SET- / HISTORY button

14

UP button

15

DOWN- / button

16

ALARM- / SET button

17

CH button

18

ALERT button

19

MEM button

20

°C / °F button

Display

21

Clock ﬁeld

22

Barometric pressure ﬁeld

23

Indoor temperature ﬁeld

24

Outdoor temperature ﬁeld

25

Outdoor sensor display

10 GB

Outdoor sensor buttons next to battery compartment

26

°C / °F button

27

TX button (Channel reset button)

28

Channel selector switch

Technical Data

Base station:

Temperature measurement range: 0 °C to 50 °C

32 °F to 122 °F

Humidity measurement range: 20 % to 95 %

Radio-controlled clock: DCF77

Batteries: 2 x LR06, 1.5 V

(size AA)

Barometric pressure

measurement range: 850 hPa to 1050 hPa

25.1 inHg to 31.1 inHg

Outdoor sensor:

Temperature measurement range: -20 °C to +50 °C

-4.0°F to + 122 °F

Humidity measurement range: 20 % to 95 %

Data transmission frequency: 433 MHz

Wireless range: max. 100 m (open area)

Batteries: 2 x LR06, 1.5 V

(size AA)

Scope of delivery

1 Weather station

1 Outdoor sensor

4 Batteries, type LR06, 1.5 V

1 Set of operating instructions

11 GB

General safety instructions

Before using the product, please familiarise

yourself with all of the safety information and in-

structions for use! When passing this product on to

others, please also include all the documents!

This product may be used by children

age 8 years and up, and persons with

reduced physical, sensory or mental capacity

or lacking experience and knowledge, when

supervised or instructed on the safe use of the

product and the associated risks. Children should

not be allowed to play with the appliance.

Cleaning and user maintenance should not be

performed by children without supervision.

Do not use the device if it is damaged.

Do not expose the base station to moisture or

direct sunlight.

12 GB

Battery safety information

DANGER TO LIFE!

Batteries are not intended for children. If acci-

dentally swallowed seek immediate medical

attention!

CAUTION! EXPLOSION HAZARD!

Never recharge non-rechargeable

batteries, short-circuit and / or open batteries!

Never throw batteries into ﬁre or water!

Do not exert mechanical loads to batteries!

Risk of battery leakage

In the event of a battery leak, immediately re-

move it from the device to prevent damage!

Avoid contact with the skin, eyes and mucous

membranes! In the event of contact with battery

acid, thoroughly ﬂush the aﬀected area with

plenty of clean water and seek immediate

medical attention!

Only use the same type of batteries! Do not mix

used and new batteries!

13 GB

Avoid extreme environmental conditions and

temperatures as they may aﬀect batteries e.g.

above radiators!

Remove the batteries from the device if they have

not been used for a long period!

Risk of equipment damage

Only use the speciﬁed battery type!

When inserting the battery ensure the correct po-

larity! This is shown in the battery compartment!

If necessary, clean the battery and device

contacts before inserting the battery!

Promptly remove drained batteries from the

product!

Start-up

Note: First insert the batteries in the outdoor sensor, then the weather

station.

Setting up the devices

ATTENTION: First start the outdoor sensor, then the base station.

If possible, do not expose the outdoor sensor or base station to

direct sunlight.

14 GB

The base station as well as the outdoor sensor can be hung by the

eyebolt

4

or

10

. Or ﬂip out the stand

6

or

11

on either device to

place the device on a horizontal, level surface.

Starting the outdoor sensor /

changing batteries

Open the battery compartment

12

on the back of the outdoor

sensor by sliding the battery cover

9

in the direction of the arrow.

When changing batteries ﬁrst remove the old batteries.

Insert the new batteries, type LR06, in the battery compartment

12

.

Check the polarity of the battery during insertion. This is indicated in

the battery compartment.

Close the battery cover.

The signal LED

8

at the front of the outdoor sensor will brieﬂy light

up. The signal LED will then ﬂash about twice a minute, indicating

wireless transmission.

Starting the base station / changing batteries

Open the battery cover

5

at the back of the base station by pulling

up on the tab at the bottom of the battery compartment.

When changing batteries ﬁrst remove the old batteries.

Insert the new batteries, type LR06, in the battery compartment

7

.

Check the polarity of the battery during insertion. This is indicated in

the battery compartment.

Close the battery cover.

The display

1

will brieﬂy light up and run a brief check of all dis-

play elements.

15 GB

The outdoor temperature ﬁeld

24

will show an animation of the

reception symbol

, indicating the base station is searching for the

signal from the outdoor sensor.

If no outdoor temperature is displayed after 3 minutes,the base sta-

tion will stop searching. The animation of the reception symbol will

turn oﬀ and the outdoor temperature ﬁeld will show --._ °C and --._ %.

Most likely, the signal cannot be received due to structural factors,

reinforced concrete walls, the brickwork being too solid, or the dis-

tance between the units. After ﬁnding a better location for the outdoor

sensor, reception will need to be restarted.

Press and hold the CH button

17

at the back of the base station for

3 seconds until the reception signal becomes animated again.

The weather station will automatically start receiving the DCF radio

signal, regardless if signal from the outdoor sensor was received or

not. The clock ﬁeld

21

will show an animated radio tower icon , in-

dicating the receiver for the DCF signal is starting to receive the time.

The DCF signal (time transmitter)

The DCF signal (German time transmission station) consists of time im-

pulses emitted by one of the most accurate clocks in the world, located

near Frankfurt / Main, Germany.

In ideal conditions, your weather station can pick up this signal over a

distance of up to approx. 1500 km around Frankfurt / Main.

If the signal is detected the clock display

21

will show the current Central

European Time, date and day of the week. A static radio tower signal

appears. For more details please refer to section Basic settings.

If the attempts to receive a signal fail the base station will stop attempting

to receive a signal after 7 minutes and the radio tower signal

will

disappear. For information on how to resolve this issue please refer to

chapter Troubleshooting.

16 GB

You may reactivate reception by pressing and holding the DOWN-/

button

15

for three seconds until an radio tower signal in the

clock display

21

becomes animated.

You also have the option to set the time manually. For more details

please refer to section Basic settings.

Once the base station has received the signal from the outdoor sensor

and the DCF signal, it enters base mode.

In base mode the base station will display the following information:

Information in base mode

The clock ﬁeld

21

Time:

The time will be displayed in 24 hour

format according to the default settings.

When selecting 12 hour mode in basic

settings, the time from 12:00 o‘clock in the

afternoon until 11:59 o‘clock at night will show PM (Latin for „post me-

ridiem“ = afternoon) in front of the time.

During Daylight Saving Time DST will appear at the top between the hour

and minute. This display is only functional when receiving the DCF signal.

Date and day:

To the left of the abbrevia-

tion D (Day) the date of

the current day appears,

and to the left of the abbreviation M (month) the date of the current

month. On the right the abbreviation for the current day of the week

17 GB

appears. The default language for this abbreviation is German, but can

be changed. Please refer to section Basic settings.

The radio tower symbol:

The radio tower symbol indicates successful reception of the

DCF signal. The weather station synchronises its internal clock

with the time station every night. During synchronisation this sym-

bol will ﬂash. If reception was successful the symbol will be static until the

next reception cycle.

The lunar phase:

The current lunar phase is indicated as follows:

The portion of the moon not illuminated will be dark in the

display.

The barometric pressure ﬁeld

22

Barometric pressure display:

At the top right is the barometric pressure

at the time shown in the HIST ﬁeld (history).

If LLL (or LL.LL when setting the unit inHg),

the display range is below 850 hPa

(25.1 inHg), if HHH (or HH.HH), it is above.

By default the current barometric pressure

(HIST = 0) is shown in the unit mb (millibar)

or hPa (hectopascal). However, the display

can also be set to the uncommon unit inHg

(inch of mercury). Please refer to section Basic settings.

The bar graph shows a graphic of the barometric pressure 0, 1, 2, 3, 6

and 12 hours ago.

18 GB

The barometric pressure trend:

The trend will appear as rising (or dropping), when the baro-

metric pressure changes by 2 hPa (= 0.06 inHg) or more

within an hour and will maintain the direction for one hour

even without any further change.

The weather forecast:

The weather station calculates a weather forecast for about the next

12 hours based on the barometric pressure trend. Of course this forecast

can‘t compare to that of professional weather services supported by

satellites and high performance computers, but merely provides an ap-

proximate indication of current developments.

Available graphic forecasts are:

slightly cloudy sunny cloudy rainy snow

The indoor temperature ﬁeld

23

The indoor temperature:

The indoor temperature measured by the base sta-

tion is displayed with indexing up to a tenth of a

degree. The temperature unit °C (for degrees Cel-

sius) appears at the top right. The temperature unit

can also be set to the now uncommon unit °F (degrees Fahrenheit).

To change to this unit press the °C/F button

20

. If LL.L appears, it is be-

low the measurement range of 0 °C to 50 °C (or 32 °F to 122 °F),

when HH.H appears it is above.

19 GB

The relative humidity:

This displays the relative humidity to which the base

station is exposed.

The temperature- or humidity trend:

The trend will appear as rising (or dropping), when the tem-

perature changes by 2 °C (= 3.6 °F) or more within an hour

and will maintain the direction for one hour even without any

further change. The humidity trend will respond accordingly with a

change of 2 % in humidity.

Indoor climate rating:

Based on the indoor humidity and temperature the weather station will

rate the indoor climate using the following key:

DRY humidity below 40 %

COMFORT humidity between 40 and 70 %,

and a temperature range between 20 °C–28 °C

(68 °F–82.4 °F).

WET humidity higher than 70%

When the indoor temperature is outside the 20 °C–28 °C range no in-

door climate rating will appear.

Low battery:

If the battery symbol appears the batteries in the base sta-

tion should be replaced as soon as possible. Please refer to

the instructions in section Starting the base station / changing

batteries.

20 GB

The outdoor temperature ﬁeld

24

The outdoor temperature:

The outdoor temperature is displayed with index-

ing up to a tenth of a degree. The temperature

unit °C (for degrees Celsius) appears at the top

right. The temperature unit can also be set to the

now uncommon unit °F (degrees Fahrenheit).

To change to this unit press the °C / F button

20

.

If LL.L appears, it is below the measurement range of -20 °C to

50 °C (or- 4 °F to 122 °F), when HH.H appears it is above.

The relative humidity:

This displays the relative humidity to which the

outdoor sensor is exposed.

The temperature- or humidity trend:

The trend will appear as rising (or dropping), when the tem-

perature changes by 2 °C (= 3.6 °F) or more within an hour

and will maintain the direction for one hour even without any

further change. The humidity trend will respond accordingly with a

change of 2 % in humidity.

Channel display:

The weather station receives the outdoor signal automati-

cally after you have made all the settings.

Note: In the event of interference from nearby equipment

transmitting radio signals, please select a diﬀerent channel

for the outdoor sensor by pressing the CH button

17

on

the weather station or the channel selector switch

28

on

Stránka sa načítava...

Auriol Z32171D Operation and Safety Notes

Tento návod je vhodný aj pre

Auriol Z32171D Operation and Safety Notes

v iných jazykoch

Súvisiace články

Ostatné dokumenty